It was found that the fix for CVE-2021-41773 in Apache HTTP Server 2.4.50 was insufficient. An attacker could use a path traversal attack to map URLs to files outside the directories configured by Alias-like directives. If files outside of these directories are not protected by the usual default configuration "require all denied", these requests can succeed. If CGI scripts are also enabled for these aliased pathes, this could allow for remote code execution. This issue only affects Apache 2.4.49 and Apache 2.4.50 and not earlier versions.

In Apache Hadoop 2.2.0 to 2.10.1, 3.0.0-alpha1 to 3.1.4, 3.2.0 to 3.2.2, and 3.3.0 to 3.3.1, a user who can escalate to yarn user can possibly run arbitrary commands as root user. Users should upgrade to Apache Hadoop 2.10.2, 3.2.3, 3.3.2 or higher.

Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Apache Livy. This issue affects Apache Livy: from 0.3.0 before 0.9.0. The vulnerability can only be exploited with non-default Apache Livy Server settings. If the configuration value "livy.file.local-dir-whitelist" is set to a non-default value, the directory checking can be bypassed. Users are recommended to upgrade to version 0.9.0, which fixes the issue.

Any client who can access to Apache Kyuubi Server via Kyuubi frontend protocols can bypass server-side config kyuubi.session.local.dir.allow.list and use local files which are not listed in the config. This issue affects Apache Kyuubi: from 1.6.0 through 1.10.2. Users are recommended to upgrade to version 1.10.3 or upper, which fixes the issue.

Improper configuration will cause ServiceComb ServiceCenter Directory Traversal problem in ServcieCenter 1.x.x versions and fixed in 2.0.0.

The IIS/ISAPI specific code in the Apache Tomcat JK ISAPI Connector 1.2.0 to 1.2.42 that normalised the requested path before matching it to the URI-worker map did not handle some edge cases correctly. If only a sub-set of the URLs supported by Tomcat were exposed via IIS, then it was possible for a specially constructed request to expose application functionality through the reverse proxy that was not intended for clients accessing Tomcat via the reverse proxy.

Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Apache PDFBox Examples. This issue affects the ExtractEmbeddedFiles example in Apache PDFBox: from 2.0.24 through 2.0.36, from 3.0.0 through 3.0.7. Users are recommended to update to version 2.0.37 or 3.0.8 once available. Until then, they should apply the fix provided in GitHub PR 427. The ExtractEmbeddedFiles example contained a path traversal vulnerability (CWE-22) mentioned in CVE-2026-23907. However the change in the releases 2.0.36 and 3.0.7 is flawed because it doesn't consider the file path separator. Because of that, a user having writing rights on /home/ABC could be victim to a malicious PDF resulting in a write attempt to any path starting with /home/ABC, e.g. "/home/ABCDEF". Users who have copied this example into their production code should apply the mentioned change. The example has been changed accordingly and is available in the project repository.

In Apache Tika 0.9 to 1.18, in a rare edge case where a user does not specify an extract directory on the commandline (--extract-dir=) and the input file has an embedded file with an absolute path, such as "C:/evil.bat", tika-app would overwrite that file.

The Apache Web Server (httpd) specific code that normalised the requested path before matching it to the URI-worker map in Apache Tomcat JK (mod_jk) Connector 1.2.0 to 1.2.44 did not handle some edge cases correctly. If only a sub-set of the URLs supported by Tomcat were exposed via httpd, then it was possible for a specially constructed request to expose application functionality through the reverse proxy that was not intended for clients accessing the application via the reverse proxy. It was also possible in some configurations for a specially constructed request to bypass the access controls configured in httpd. While there is some overlap between this issue and CVE-2018-1323, they are not identical.

Improper Input Validation vulnerability in Apache Zeppelin. By adding relative path indicators(E.g ..), attackers can see the contents for any files in the filesystem that the server account can access.  This issue affects Apache Zeppelin: from 0.9.0 before 0.11.0. Users are recommended to upgrade to version 0.11.0, which fixes the issue.

In Apache Allura before 1.8.0, unauthenticated attackers may retrieve arbitrary files through the Allura web application. Some webservers used with Allura, such as Nginx, Apache/mod_wsgi or paster may prevent the attack from succeeding. Others, such as gunicorn do not prevent it and leave Allura vulnerable.

Users with administrator access can create databases files outside the files area of the Fuseki server. This issue affects Apache Jena version up to 5.4.0. Users are recommended to upgrade to version 5.5.0, which fixes the issue.

In Pulsar Functions Worker, authenticated users can upload functions in jar or nar files. These files, essentially zip files, are extracted by the Functions Worker. However, if a malicious file is uploaded, it could exploit a directory traversal vulnerability. This occurs when the filenames in the zip files, which aren't properly validated, contain special elements like "..", altering the directory path. This could allow an attacker to create or modify files outside of the designated extraction directory, potentially influencing system behavior. This vulnerability also applies to the Pulsar Broker when it is configured with "functionsWorkerEnabled=true". This issue affects Apache Pulsar versions from 2.4.0 to 2.10.5, from 2.11.0 to 2.11.3, from 3.0.0 to 3.0.2, from 3.1.0 to 3.1.2, and 3.2.0. 2.10 Pulsar Function Worker users should upgrade to at least 2.10.6. 2.11 Pulsar Function Worker users should upgrade to at least 2.11.4. 3.0 Pulsar Function Worker users should upgrade to at least 3.0.3. 3.1 Pulsar Function Worker users should upgrade to at least 3.1.3. 3.2 Pulsar Function Worker users should upgrade to at least 3.2.1. Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions.

Possible path traversal in Apache OFBiz allowing file inclusion. Users are recommended to upgrade to version 18.12.12, that fixes the issue.

Malicious code execution via path traversal in Apache Software Foundation Apache Sling Servlets Resolver.This issue affects all version of Apache Sling Servlets Resolver before 2.11.0. However, whether a system is vulnerable to this attack depends on the exact configuration of the system. If the system is vulnerable, a user with write access to the repository might be able to trick the Sling Servlet Resolver to load a previously uploaded script.  Users are recommended to upgrade to version 2.11.0, which fixes this issue. It is recommended to upgrade, regardless of whether your system configuration currently allows this attack or not.

** UNSUPPORTED WHEN ASSIGNED ** The value set as the DefaultLocaleResolver.LOCALE_KEY attribute on the session was not validated while resolving XML definition files, leading to possible path traversal and eventually SSRF/XXE when passing user-controlled data to this key. Passing user-controlled data to this key may be relatively common, as it was also used like that to set the language in the 'tiles-test' application shipped with Tiles. This issue affects Apache Tiles from version 2 onwards. NOTE: This vulnerability only affects products that are no longer supported by the maintainer.

Apache Shiro before 1.13.0 or 2.0.0-alpha-4, may be susceptible to a path traversal attack that results in an authentication bypass when used together with path rewriting Mitigation: Update to Apache Shiro 1.13.0+ or 2.0.0-alpha-4+, or ensure `blockSemicolon` is enabled (this is the default).

Nezha Monitoring is a self-hostable, lightweight, servers and websites monitoring and O&M tool. Prior to version 2.0.13, fallbackToFrontend in the dashboard's NoRoute handler treats any URL whose raw string starts with /dashboard as an admin-frontend asset request. The check uses strings.HasPrefix, not a path-segment match, so the input /dashboard../data/config.yaml is accepted; strings.TrimPrefix leaves ../data/config.yaml; and path.Join("admin-dist", "../data/config.yaml") normalizes to data/config.yaml — which os.Stat finds and http.ServeFile returns. No authentication required. This issue has been patched in version 2.0.13.

Traefik is an HTTP reverse proxy and load balancer. Prior to 2.11.48, 3.6.19, and 3.7.3, there is a high severity vulnerability in Traefik's StripPrefix middleware that allows an unauthenticated attacker to bypass route-level authentication and authorization. When a public router matches on a PathPrefix rule and applies the StripPrefix middleware, a request path containing .. or its percent-encoded form %2e%2e can match the public route at routing time and then, after the prefix is stripped and the path is normalized, resolve to a path served by a separate, authenticated router. As a result, an attacker can reach protected backend paths — such as admin or internal configuration endpoints — without satisfying the authentication middleware attached to the protected router. This vulnerability is fixed in 2.11.48, 3.6.19, and 3.7.3.

In OCaml-tar before 3.4.0, a crafted archive with ../ path segments in its name allows escaping the current working directory. This is not desired behavior, and tar(1) rejects such extractions, but ocaml-tar decompresses it anyway. The impact is that it allows arbitrary file writes outside of the desired extraction directory (to an attacker that can reach a tar decompression endpoint).

IBM AIX 7.2, and 7.3 and IBM VIOS 3.1, and 4.1 NIM server (formerly known as NIM master) service (nimesis) could allow a remote attacker to traverse directories on the system. An attacker could send a specially crafted URL request to write arbitrary files on the system.

Traefik (pronounced traffic) is an HTTP reverse proxy and load balancer. In versions prior to 2.11.24, 3.3.6, and 3.4.0-rc2. There is a potential vulnerability in Traefik managing the requests using a PathPrefix, Path or PathRegex matcher. When Traefik is configured to route the requests to a backend using a matcher based on the path, if the URL contains a /../ in its path, it’s possible to target a backend, exposed using another router, by-passing the middlewares chain. This issue has been patched in versions 2.11.24, 3.3.6, and 3.4.0-rc2. A workaround involves adding a `PathRegexp` rule to the matcher to prevent matching a route with a `/../` in the path.

Kirby is an open-source content management system. A vulnerability in versions prior to 3.9.8.3, 3.10.1.2, and 4.7.1 affects all Kirby sites that use the `collection()` helper or `$kirby->collection()` method with a dynamic collection name (such as a collection name that depends on request or user data). Sites that only use fixed calls to the `collection()` helper/`$kirby->collection()` method (i.e. calls with a simple string for the collection name) are *not* affected. A missing path traversal check allowed attackers to navigate and access all files on the server that were accessible to the PHP process, including files outside of the collections root or even outside of the Kirby installation. PHP code within such files was executed. Such attacks first require an attack vector in the site code that is caused by dynamic collection names, such as `collection('tags-' . get('tags'))`. It generally also requires knowledge of the site structure and the server's file system by the attacker, although it can be possible to find vulnerable setups through automated methods such as fuzzing. In a vulnerable setup, this could cause damage to the confidentiality and integrity of the server. The problem has been patched in Kirby 3.9.8.3, Kirby 3.10.1.2, and Kirby 4.7.1. In all of the mentioned releases, the maintainers of Kirby have added a check for the collection path that ensures that the resulting path is contained within the configured collections root. Collection paths that point outside of the collections root will not be loaded.

django-s3file is a lightweight file upload input for Django and Amazon S3 . In versions prior to 5.5.1 it was possible to traverse the entire AWS S3 bucket and in most cases to access or delete files. If the `AWS_LOCATION` setting was set, traversal was limited to that location only. The issue was discovered by the maintainer. There were no reports of the vulnerability being known to or exploited by a third party, prior to the release of the patch. The vulnerability has been fixed in version 5.5.1 and above. There is no feasible workaround. We must urge all users to immediately updated to a patched version.

Grav is a file-based Web platform. Prior to 2.0.0-beta.2, there is a Path Traversal vulnerability within the FormFlash core component. By manipulating the session_id (passed as __form-flash-id in POST requests), an unauthenticated attacker can traverse the filesystem to create arbitrary directories and write an index.yaml file containing attacker-controlled data. This vulnerability can lead to unauthorized modification of application behavior, potential data integrity issues, and service disruption in production environments. This vulnerability is fixed in 2.0.0-beta.2.

Kirby is an open-source content management system. A vulnerability in versions prior to 3.9.8.3, 3.10.1.2, and 4.7.1 affects all Kirby sites that use the `snippet()` helper or `$kirby->snippet()` method with a dynamic snippet name (such as a snippet name that depends on request or user data). Sites that only use fixed calls to the `snippet()` helper/`$kirby->snippet()` method (i.e. calls with a simple string for the snippet name) are *not* affected. A missing path traversal check allowed attackers to navigate and access all files on the server that were accessible to the PHP process, including files outside of the snippets root or even outside of the Kirby installation. PHP code within such files was executed. Such attacks first require an attack vector in the site code that is caused by dynamic snippet names, such as `snippet('tags-' . get('tags'))`. It generally also requires knowledge of the site structure and the server's file system by the attacker, although it can be possible to find vulnerable setups through automated methods such as fuzzing. In a vulnerable setup, this could cause damage to the confidentiality and integrity of the server. The problem has been patched in Kirby 3.9.8.3, Kirby 3.10.1.2, and Kirby 4.7.1. In all of the mentioned releases, Kirby maintainers have added a check for the snippet path that ensures that the resulting path is contained within the configured snippets root. Snippet paths that point outside of the snippets root will not be loaded.

An issue in the /script-api/scripts/ endpoint of OpenC3 COSMOS before 6.1.0 allows attackers to execute a directory traversal.

Applio is a voice conversion tool. Versions 3.2.8-bugfix and prior are vulnerable to arbitrary file removal in core.py. `output_tts_path` in tts.py takes arbitrary user input and passes it to `run_tts_script` function in core.py, which checks if the path in `output_tts_path` exists, and if yes, removes that path, which leads to arbitrary file removal. As of time of publication, no known patches are available.

WhoDB is an open source database management tool. While the application only displays Sqlite3 databases present in the directory `/db`, there is no path traversal prevention in place. This allows an unauthenticated attacker to open any Sqlite3 database present on the host machine that the application is running on. Affected versions of WhoDB allow users to connect to Sqlite3 databases. By default, the databases must be present in `/db/` (or alternatively `./tmp/` if development mode is enabled). If no databases are present in the default directory, the UI indicates that the user is unable to open any databases. The database file is an user-controlled value. This value is used in `.Join()` with the default directory, in order to get the full path of the database file to open. No checks are performed whether the database file that is eventually opened actually resides in the default directory `/db`. This allows an attacker to use path traversal (`../../`) in order to open any Sqlite3 database present on the system. This issue has been addressed in version 0.45.0 and all users are advised to upgrade. There are no known workarounds for this vulnerability.

Path traversal vulnerability in Samsung Members prior to version 5.0.00.11 allows attackers to read and write arbitrary file with the privilege of Samsung Members.

Archive::Tar versions before 3.08 for Perl extract symlinks with attacker controlled targets outside the extraction directory. _make_special_file() passes the tar header's linkname to symlink() without validating it against absolute paths or .. segments. The secure-extract mode check that guards regular file extraction does not cover the symlink target. A subsequent open through the extracted name reads or writes the attacker chosen path.

Spring Cloud Config allows applications to serve arbitrary text and binary files through the spring-cloud-config-server module. A malicious user, or attacker, can send a request using a specially crafted URL that can lead to a directory traversal attack. Spring Cloud Config 3.1.x: affected from 3.1.0 through 3.1.13 (inclusive); upgrade to 3.1.14 or greater (Enterprise Support Only). Spring Cloud Config 4.1.x: affected from 4.1.0 through 4.1.9 (inclusive); upgrade to 4.1.10 or greater (Enterprise Support Only). Spring Cloud Config 4.2.x: affected from 4.2.0 through 4.2.6 (inclusive); upgrade to 4.2.7 or greater (Enterprise Support Only). Spring Cloud Config 4.3.x: affected from 4.3.0 through 4.3.2 (inclusive); upgrade to 4.3.3 or greater. Spring Cloud Config 5.0.x: affected from 5.0.0 through 5.0.2 (inclusive); upgrade to 5.0.3 or greater.

Copilot said: i18nextify is a JavaScript library that adds i18nextify is a JavaScript library that adds website internationalization via a script tag, without source code changes. Versions prior to 3.0.5 interpolate the lng and ns values directly into the configured loadPath / addPath URL template without any encoding, validation, or path sanitisation. When an application exposes the language-code selection to user-controlled input (the default — i18next-browser-languagedetector reads ?lng= query params, cookies, localStorage, and request headers), an attacker can inject characters that change the structure of the outgoing request URL. This is a single URL-injection vulnerability. The attacker-controlled value is neutralised before it is used as part of an output URL string; the attack shape covers both path traversal and broader URL-structure injection — both are closed by the one interpolateUrl sanitisation fix. This issue has been fixed in version 3.0.5. If users cannot upgrade immediately, they can work around the issue by sanitising lng / ns before they reach i18next (strip .., /, \, ?, #, %, whitespace, and control characters; cap the length).

A vulnerability in MLflow's pyfunc extraction process allows for arbitrary file writes due to improper handling of tar archive entries. Specifically, the use of `tarfile.extractall` without path validation enables crafted tar.gz files containing `..` or absolute paths to escape the intended extraction directory. This issue affects the latest version of MLflow and poses a high/critical risk in scenarios involving multi-tenant environments or ingestion of untrusted artifacts, as it can lead to arbitrary file overwrites and potential remote code execution.

Parameter verification vulnerability in the installd module. Successful exploitation of this vulnerability may cause sandbox files to be read and written without authorization.

Parameter verification vulnerability in the installd module. Successful exploitation of this vulnerability may cause sandbox files to be read and written without authorization.

Parameter verification vulnerability in the installd module. Successful exploitation of this vulnerability may cause sandbox files to be read and written without authorization.

A directory traversal vulnerability in the apoc plugins in Neo4J Graph database before 4.4.0.1 allows attackers to read local files, and sometimes create local files. This is fixed in 3.5.17, 4.2.10, 4.3.0.4, and 4.4.0.1.

Barcode is a GLPI plugin for printing barcodes and QR codes. GLPI instances version 2.x prior to version 2.6.1 with the barcode plugin installed are vulnerable to a path traversal vulnerability. This issue was patched in version 2.6.1. As a workaround, delete the `front/send.php` file.

DDEV is an open-source tool for running local web development environments for PHP and Node.js. Versions prior to 1.25.2 have unsanitized extraction in both `Untar()` and `Unzip()` functions in `pkg/archive/archive.go`. Downloads and extracts archives from remote sources without path validation. Version 1.25.2 patches the issue.

Saloon is a PHP library that gives users tools to build API integrations and SDKs. Prior to version 4.0.0, fixture names were used to build file paths under the configured fixture directory without validation. A name containing path segments (e.g. ../traversal or ../../etc/passwd) resulted in a path outside that directory. When the application read a fixture (e.g. for mocking) or wrote one (e.g. when recording responses), it could read or write files anywhere the process had access. If the fixture name was derived from user or attacker-controlled input (e.g. request parameters or config), this constituted a path traversal vulnerability and could lead to disclosure of sensitive files or overwriting of critical files. The fix in version 4.0.0 adds validation in the fixture layer (rejecting names with /, \, .., or null bytes, and restricting to a safe character set) and defense-in-depth in the storage layer (ensuring the resolved path remains under the base directory before any read or write).

changedetection.io is a free open source web page change detection tool. Prior to version 0.54.4, a Zip Slip vulnerability in the backup restore functionality allows arbitrary file overwrite via path traversal in uploaded ZIP archives. This issue has been patched in version 0.54.4.

An issue was discovered in PRiSE adAS 1.7.0. The path is not properly escaped in the medatadata_del method, leading to an arbitrary file read and deletion via Directory Traversal.

Rollup is a module bundler for JavaScript. Versions prior to 2.80.0, 3.30.0, and 4.59.0 of the Rollup module bundler (specifically v4.x and present in current source) is vulnerable to an Arbitrary File Write via Path Traversal. Insecure file name sanitization in the core engine allows an attacker to control output filenames (e.g., via CLI named inputs, manual chunk aliases, or malicious plugins) and use traversal sequences (`../`) to overwrite files anywhere on the host filesystem that the build process has permissions for. This can lead to persistent Remote Code Execution (RCE) by overwriting critical system or user configuration files. Versions 2.80.0, 3.30.0, and 4.59.0 contain a patch for the issue.

Absolute path traversal vulnerability in Quick.CMS, version 6.7, the exploitation of which could allow remote users to bypass the intended restrictions and download any file if it has the appropriate permissions outside of documentroot configured on the server via the aDirFiles%5B0%5D parameter in the admin.php page. This vulnerability allows an attacker to delete files stored on the server due to a lack of proper verification of user-supplied input.

Unauthenticated remote .jpg file upload in contus-video-comments v1.0 wordpress plugin

There is a Improper Limitation of a Pathname to a Restricted Directory vulnerability in Huawei Smartphone.Successful exploitation of this vulnerability may lead to arbitrary file created.

Dell VNX2 for File version 8.1.21.266 and earlier, contain a path traversal vulnerability which may lead unauthenticated users to read/write restricted files

There is a Path Traversal vulnerability in Huawei Smartphone.Successful exploitation of this vulnerability may lead to attackers can write any content to any file.

An issue in OpenPanel v0.3.4 to v0.2.1 allows attackers to execute a directory traversal in File Actions of File Manager.