React Router is a router for React. In @react-router/node versions 7.0.0 through 7.9.3, @remix-run/deno prior to version 2.17.2, and @remix-run/node prior to version 2.17.2, if createFileSessionStorage() is being used from @react-router/node (or @remix-run/node/@remix-run/deno in Remix v2) with an unsigned cookie, it is possible for an attacker to cause the session to try to read/write from a location outside the specified session file directory. The success of the attack would depend on the permissions of the web server process to access those files. Read files cannot be returned directly to the attacker. Session file reads would only succeed if the file matched the expected session file format. If the file matched the session file format, the data would be populated into the server side session but not directly returned to the attacker unless the application logic returned specific session information. This issue has been patched in @react-router/node version 7.9.4, @remix-run/deno version 2.17.2, and @remix-run/node version 2.17.2.
A vulnerability in MLflow's pyfunc extraction process allows for arbitrary file writes due to improper handling of tar archive entries. Specifically, the use of `tarfile.extractall` without path validation enables crafted tar.gz files containing `..` or absolute paths to escape the intended extraction directory. This issue affects the latest version of MLflow and poses a high/critical risk in scenarios involving multi-tenant environments or ingestion of untrusted artifacts, as it can lead to arbitrary file overwrites and potential remote code execution.
Traefik is an HTTP reverse proxy and load balancer. Prior to 2.11.48, 3.6.19, and 3.7.3, there is a high severity vulnerability in Traefik's StripPrefix middleware that allows an unauthenticated attacker to bypass route-level authentication and authorization. When a public router matches on a PathPrefix rule and applies the StripPrefix middleware, a request path containing .. or its percent-encoded form %2e%2e can match the public route at routing time and then, after the prefix is stripped and the path is normalized, resolve to a path served by a separate, authenticated router. As a result, an attacker can reach protected backend paths — such as admin or internal configuration endpoints — without satisfying the authentication middleware attached to the protected router. This vulnerability is fixed in 2.11.48, 3.6.19, and 3.7.3.
A path traversal and arbitrary file write vulnerability exist in the embedded get function in '_main_.py' in PyMuPDF version, 1.26.5.
Rollup is a module bundler for JavaScript. Versions prior to 2.80.0, 3.30.0, and 4.59.0 of the Rollup module bundler (specifically v4.x and present in current source) is vulnerable to an Arbitrary File Write via Path Traversal. Insecure file name sanitization in the core engine allows an attacker to control output filenames (e.g., via CLI named inputs, manual chunk aliases, or malicious plugins) and use traversal sequences (`../`) to overwrite files anywhere on the host filesystem that the build process has permissions for. This can lead to persistent Remote Code Execution (RCE) by overwriting critical system or user configuration files. Versions 2.80.0, 3.30.0, and 4.59.0 contain a patch for the issue.
Spring Cloud Config allows applications to serve arbitrary text and binary files through the spring-cloud-config-server module. A malicious user, or attacker, can send a request using a specially crafted URL that can lead to a directory traversal attack. Spring Cloud Config 3.1.x: affected from 3.1.0 through 3.1.13 (inclusive); upgrade to 3.1.14 or greater (Enterprise Support Only). Spring Cloud Config 4.1.x: affected from 4.1.0 through 4.1.9 (inclusive); upgrade to 4.1.10 or greater (Enterprise Support Only). Spring Cloud Config 4.2.x: affected from 4.2.0 through 4.2.6 (inclusive); upgrade to 4.2.7 or greater (Enterprise Support Only). Spring Cloud Config 4.3.x: affected from 4.3.0 through 4.3.2 (inclusive); upgrade to 4.3.3 or greater. Spring Cloud Config 5.0.x: affected from 5.0.0 through 5.0.2 (inclusive); upgrade to 5.0.3 or greater.
Helm is a package manager for Charts for Kubernetes. From 4.0.0 to 4.1.3, a specially crafted Helm plugin, when installed or updated, will cause Helm to write the contents of the plugin to an arbitrary filesystem location. To prevent this, validate that the plugin.yaml of the Helm plugin does not include a version: field containing POSIX dot-dot path separators ie. "/../". This vulnerability is fixed in 4.1.4.
node-tar is a Tar for Node.js. The node-tar library (<= 7.5.2) fails to sanitize the linkpath of Link (hardlink) and SymbolicLink entries when preservePaths is false (the default secure behavior). This allows malicious archives to bypass the extraction root restriction, leading to Arbitrary File Overwrite via hardlinks and Symlink Poisoning via absolute symlink targets. This vulnerability is fixed in 7.5.3.
A flaw was found in Undertow. When Undertow receives an HTTP request where the first header line starts with one or more spaces, it incorrectly processes the request by stripping these leading spaces. This behavior, which violates HTTP standards, can be exploited by a remote attacker to perform request smuggling. Request smuggling allows an attacker to bypass security mechanisms, access restricted information, or manipulate web caches, potentially leading to unauthorized actions or data exposure.
A flaw in Node.js’s Permissions model allows attackers to bypass `--allow-fs-read` and `--allow-fs-write` restrictions using crafted relative symlink paths. By chaining directories and symlinks, a script granted access only to the current directory can escape the allowed path and read sensitive files. This breaks the expected isolation guarantees and enables arbitrary file read/write, leading to potential system compromise. This vulnerability affects users of the permission model on Node.js v20, v22, v24, and v25.
Arm C1-Ultra, C1-Premium, Neoverse V3 & V3AE, Neoverse V2, Neoverse V1, Neoverse-N2, Neoverse-N1, Cortex-X925, Cortex-X4, Cortex-X3, Cortex-X2, Cortex-X1 & X1C, Cortex-A710, Cortex-A78, A78AE & A78C, Cortex-A77, Cortex-A76 & A76A may allow writes to resources owned by a higher exception level.
When adding a key to a remote agent constraint extensions such as restrict-destination-v00@openssh.com were not serialized in the request. Destination restrictions were silently stripped when forwarding keys, allowing unrestricted use of the key on the remote host. The client now serializes all constraint extensions. Additionally, the in-memory keyring returned by NewKeyring() now rejects keys with unsupported constraint extensions instead of silently ignoring them.
Previously, a revoked 'SignatureKey' belonging to a CA was not correctly checked for revocation. Now, both the 'key' and 'key.SignatureKey' are checked for @revoked.
Same-origin policy bypass in the DOM: Networking component. This vulnerability was fixed in Firefox 151 and Thunderbird 151.
HTTP::Daemon versions before 6.17 for Perl allow OS command injection via send_file(). send_file() opens its string argument with Perl's 2-arg open(). The 2-arg form interprets magic prefixes: '| cmd' and 'cmd |' open a pipe to a subprocess, '> path' and '>> path' open the path for write or append. Untrusted input passed to send_file() can run OS commands at the daemon process UID. The read-pipe form ('cmd |') also leaks subprocess stdout into the HTTP response body. The write-mode forms can create or truncate files at attacker chosen paths.
Pyroscope is an open-source continuous profiling database. The database supports various storage backends, including Tencent Cloud Object Storage (COS). If the database is configured to use Tencent COS as the storage backend, an attacker could extract the secret_key configuration value from the Pyroscope API. To exploit this vulnerability, an attacker needs direct access to the Pyroscope API. We highly recommend limiting the public internet exposure of all our databases, such that they are only accessible by trusted users or internal systems. This vulnerability is fixed in versions: 1.15.x: 1.15.2 and above. 1.16.x: 1.16.1 and above. 1.17.x: 1.17.0 and above (i.e. all versions). Thanks to Théo Cusnir for reporting this vulnerability to us via our bug bounty program.
In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_inner: Fix IPv6 inner_thoff desync In nft_inner_parse_l2l3(), when processing inner IPv6 packets, ipv6_find_hdr() correctly computes the transport header offset traversing all extension headers, but the result is immediately overwritten with nhoff + sizeof(_ip6h) (40 bytes), which only accounts for the IPv6 base header. This creates a desync between inner_thoff (wrong — points to extension header start) and l4proto (correct — e.g., IPPROTO_TCP), enabling transport header forgery and potential firewall bypass. This issue affects stable versions from Linux 6.2. For comparison, the normal (non-inner) IPv6 path correctly preserves ipv6_find_hdr()'s result. Removing the incorrect overwrite ensures that ipv6_find_hdr()'s calculated transport header offset is preserved, thereby fixing the desynchronization.
A flaw was found in the Mirror Registry. The quay-app container shipped as part of the Mirror Registry for OpenShift has write access to the `/etc/passwd`. This flaw allows a malicious actor with access to the container to modify the passwd file and elevate their privileges to the root user within that pod.
A flaw was found in Quarkus. This issue occurs when receiving a request over websocket with no role-based permission specified on the GraphQL operation, Quarkus processes the request without authentication despite the endpoint being secured. This can allow an attacker to access information and functionality outside of normal granted API permissions.
Gitea does not properly validate repository ownership when linking attachments to releases. An attachment uploaded to a private repository could potentially be linked to a release in a different public repository, making it accessible to unauthorized users.
A flaw was found when an OpenSSL security provider is used with Wildfly, the 'enabled-protocols' value in the Wildfly configuration isn't honored. An attacker could target the traffic sent from Wildfly and downgrade the connection to a weaker version of TLS, potentially breaking the encryption. This could lead to a leak of the data being passed over the network. Wildfly version 7.2.0.GA, 7.2.3.GA and 7.2.5.CR2 are believed to be vulnerable.
A flaw was found in keycloack before version 8.0.0. The owner of 'placeholder.org' domain can setup mail server on this domain and knowing only name of a client can reset password and then log in. For example, for client name 'test' the email address will be 'service-account-test@placeholder.org'.
A flaw was found in all python-ecdsa versions before 0.13.3, where it did not correctly verify whether signatures used DER encoding. Without this verification, a malformed signature could be accepted, making the signature malleable. Without proper verification, an attacker could use a malleable signature to create false transactions.
Traefik is an HTTP reverse proxy and load balancer. From 3.7.0 until 3.7.3, there is a high severity vulnerability in Traefik's domain-fronting protection (SNICheck) that allows an unauthenticated client to bypass mutual TLS enforced through wildcard router TLSOptions. When a router uses a wildcard host rule such as Host(*.example.com) with stricter TLS options (for example RequireAndVerifyClientCert), SNICheck resolves the TLS options for the HTTP Host header using exact map lookups only and never applies wildcard matching. If another permissive SNI is served on the same entrypoint, an attacker can complete the TLS handshake under the permissive options and then send an HTTP Host header targeting the wildcard-protected backend, reaching it without presenting a client certificate. This affects the regular HTTPS / HTTP-2 path and does not require HTTP/3. This vulnerability is fixed in 3.7.3.
Versions of the package jsrsasign from 7.0.0 and before 11.1.1 are vulnerable to Incomplete Comparison with Missing Factors via the getRandomBigIntegerZeroToMax and getRandomBigIntegerMinToMax functions in src/crypto-1.1.js; an attacker can recover the private key by exploiting the incorrect compareTo checks that accept out-of-range candidates and thus bias DSA nonces during signature generation.
Versions of the package jsrsasign before 11.1.1 are vulnerable to Improper Verification of Cryptographic Signature via the DSA domain-parameter validation in KJUR.crypto.DSA.setPublic (and the related DSA/X509 verification flow in src/dsa-2.0.js). An attacker can forge DSA signatures or X.509 certificates that X509.verifySignature() accepts by supplying malicious domain parameters such as g=1, y=1, and a fixed r=1, which make the verification equation true for any hash.
Traefik is an HTTP reverse proxy and load balancer. Prior to 3.7.3, there is a critical vulnerability in Traefik's HTTP/3 (QUIC) TLS configuration selection that allows unauthenticated clients to bypass router-specific mTLS enforcement. When HTTP/3 is enabled on an entrypoint, the TLS handshake selects the applicable TLS configuration through an exact, case-sensitive lookup on the SNI value, which fails to match wildcard host patterns (e.g., *.example.com) or case variants of the configured hostname. Because the handshake falls back to the default TLS configuration — which may not require client certificates — a client can complete the QUIC handshake without presenting a certificate, while the subsequent HTTP routing layer still dispatches the request to a backend protected by a router-specific mTLS policy. The issue affects deployments where HTTP/3 is enabled, a router uses a wildcard Host rule or case-insensitive hostname matching, a router-specific TLSOptions enforces client certificate authentication, and UDP access to the entrypoint is reachable by an attacker. This vulnerability is fixed in 3.7.3.
MariaDB server is a community developed fork of MySQL server. In versions 3.3.18 and 3.4.8, an application that was taking non-validated user input, escaping it with mysql_real_escape_string() and sending it to the database using text protocol and big5 character set was vulnerable to SQL injections, even though mysql_real_escape_string() was supposed to prevent them. This issue has been patched in versions 3.3.19 and 3.4.9.
Axios is a promise based HTTP client for the browser and Node.js. From version 1.0.0 to before version 1.15.2, fFive config properties (auth, baseURL, socketPath, beforeRedirect, and insecureHTTPParser) in the HTTP adapter are read via direct property access without hasOwnProperty guards, making them exploitable as prototype pollution gadgets. When Object.prototype is polluted by another dependency in the same process, axios silently picks up these polluted values on every outbound HTTP request. This issue has been patched in version 1.15.2.
OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. In versions 3.4.0 through 3.4.9, 3.3.0 through 3.3.9, and 3.2.0 through 3.2.7, `internal_dwa_compressor.h:1722` performs `curc->width * curc->height` in `int32` arithmetic without a `(size_t)` cast. This is the same overflow pattern fixed in other locations by the recent CVE-2026-34589 batch, but this line was missed. Versions 3.4.10, 3.3.10, and 3.2.8 contain a fix that addresses `internal_dwa_compressor.h:1722`.
Improper verification of cryptographic signature in ASP.NET Core allows an unauthorized attacker to elevate privileges over a network.
OAuth2 Proxy is a reverse proxy that provides authentication using OAuth2 providers. Versions 7.5.0 through 7.15.1 may trust a client-supplied `X-Forwarded-Uri` header when `--reverse-proxy` is enabled and `--skip-auth-regex` or `--skip-auth-route` is configured. An attacker can spoof this header so OAuth2 Proxy evaluates authentication and skip-auth rules against a different path than the one actually sent to the upstream application. This can result in an unauthenticated remote attacker bypassing authentication and accessing protected routes without a valid session. Impacted users are deployments that run oauth2-proxy with `--reverse-proxy` enabled and configure at least one `--skip-auth-regex` or `--skip-auth-route` rule. This issue is patched in `v7.15.2`. Some workarounds are available for those who cannot upgrade immediately. Strip any client-provided `X-Forwarded-Uri` header at the reverse proxy or load balancer level; explicitly overwrite `X-Forwarded-Uri` with the actual request URI before forwarding requests to OAuth2 Proxy; restrict direct client access to OAuth2 Proxy so it can only be reached through a trusted reverse proxy; and/or remove or narrow `--skip-auth-regex` / `--skip-auth-route` rules where possible. For nginx-based deployments, ensure `X-Forwarded-Uri` is set by nginx and not passed through from the client.
XML External Entity (XXE) via Unsanitized Dictionary Parsing in Apache OpenNLP DictionaryEntryPersistor Versions Affected: before 2.5.9, before 3.0.0-M3 Description: The DictionaryEntryPersistor class initializes a static SAXParserFactory at class-load time without enabling FEATURE_SECURE_PROCESSING or disabling DTD processing. When create(InputStream, EntryInserter) is invoked, the only feature set on the XMLReader is namespace support — external entity resolution and DOCTYPE declarations remain fully enabled. An attacker who can supply a crafted dictionary file (e.g., a stop-word list or domain dictionary) containing a malicious DOCTYPE declaration can trigger local file disclosure via file:// entity references or server-side request forgery via http:// entity references during SAX parsing, before the application processes a single dictionary entry. This is inconsistent with the project's own XmlUtil.createSaxParser() helper, which correctly sets FEATURE_SECURE_PROCESSING and disallow-doctype-decl and is used by all other XML parsing paths in the codebase. The public Dictionary(InputStream) constructor delegates directly to this method and is the documented API for loading user-supplied dictionaries, making untrusted input a realistic scenario. Mitigation: 2.x users should upgrade to 2.5.9. 3.x users should upgrade to 3.0.0-M3. Users who cannot upgrade immediately should ensure that all dictionary files are sourced from trusted origins and should consider wrapping the Dictionary(InputStream) constructor with input validation that rejects any XML containing a DOCTYPE declaration before it reaches the parser.
Apache::Session::Generate::ModUniqueId versions from 1.54 through 1.94 for Perl session ids are insecure. Apache::Session::Generate::ModUniqueId (added in version 1.54) uses the value of the UNIQUE_ID environment variable for the session id. The UNIQUE_ID variable is set by the Apache mod_unique_id plugin, which generates unique ids for the request. The id is based on the IPv4 address, the process id, the epoch time, a 16-bit counter and a thread index, with no obfuscation. The server IP is often available to the public, and if not available, can be guessed from previous session ids being issued. The process ids may also be guessed from previous session ids. The timestamp is easily guessed (and leaked in the HTTP Date response header). The purpose of mod_unique_id is to assign a unique id to requests so that events can be correlated in different logs. The id is not designed, nor is it suitable for security purposes.
LiteLLM is a proxy server (AI Gateway) to call LLM APIs in OpenAI (or native) format. Prior to 1.83.0, when JWT authentication is enabled (enable_jwt_auth: true), the OIDC userinfo cache uses token[:20] as the cache key. JWT headers produced by the same signing algorithm generate identical first 20 characters. This configuration option is not enabled by default. Most instances are not affected. An unauthenticated attacker can craft a token whose first 20 characters match a legitimate user's cached token. On cache hit, the attacker inherits the legitimate user's identity and permissions. This affects deployments with JWT/OIDC authentication enabled. Fixed in v1.83.0.
Forge (also called `node-forge`) is a native implementation of Transport Layer Security in JavaScript. Prior to version 1.4.0, `pki.verifyCertificateChain()` does not enforce RFC 5280 basicConstraints requirements when an intermediate certificate lacks both the `basicConstraints` and `keyUsage` extensions. This allows any leaf certificate (without these extensions) to act as a CA and sign other certificates, which node-forge will accept as valid. Version 1.4.0 patches the issue.
Botan is a C++ cryptography library. In 3.11.0, the function Certificate_Store::certificate_known had a misleading name; it would return true if any certificate in the store had a DN (and subject key identifier, if set) matching that of the argument. It did not check that the cert it found and the cert it was passed were actually the same certificate. In 3.11.0 an extension of path validation logic was made which assumed that certificate_known only returned true if the certificates were in fact identical. The impact is that if an end entity certificate is presented, and its DN (and subject key identifier, if set) match that of any trusted root, the end entity certificate is accepted immediately as if it itself were a trusted root. , This vulnerability is fixed in 3.11.1.
Versions of the package jsrsasign before 11.1.1 are vulnerable to Missing Cryptographic Step via the KJUR.crypto.DSA.signWithMessageHash process in the DSA signing implementation. An attacker can recover the private key by forcing r or s to be zero, so the library emits an invalid signature without retrying, and then solves for x from the resulting signature.
gRPC-Go is the Go language implementation of gRPC. Versions prior to 1.79.3 have an authorization bypass resulting from improper input validation of the HTTP/2 `:path` pseudo-header. The gRPC-Go server was too lenient in its routing logic, accepting requests where the `:path` omitted the mandatory leading slash (e.g., `Service/Method` instead of `/Service/Method`). While the server successfully routed these requests to the correct handler, authorization interceptors (including the official `grpc/authz` package) evaluated the raw, non-canonical path string. Consequently, "deny" rules defined using canonical paths (starting with `/`) failed to match the incoming request, allowing it to bypass the policy if a fallback "allow" rule was present. This affects gRPC-Go servers that use path-based authorization interceptors, such as the official RBAC implementation in `google.golang.org/grpc/authz` or custom interceptors relying on `info.FullMethod` or `grpc.Method(ctx)`; AND that have a security policy contains specific "deny" rules for canonical paths but allows other requests by default (a fallback "allow" rule). The vulnerability is exploitable by an attacker who can send raw HTTP/2 frames with malformed `:path` headers directly to the gRPC server. The fix in version 1.79.3 ensures that any request with a `:path` that does not start with a leading slash is immediately rejected with a `codes.Unimplemented` error, preventing it from reaching authorization interceptors or handlers with a non-canonical path string. While upgrading is the most secure and recommended path, users can mitigate the vulnerability using one of the following methods: Use a validating interceptor (recommended mitigation); infrastructure-level normalization; and/or policy hardening.
A possible security vulnerability has been identified in Apache Kafka. By default, the broker property `sasl.oauthbearer.jwt.validator.class` is set to `org.apache.kafka.common.security.oauthbearer.DefaultJwtValidator`. It accepts any JWT token without validating its signature, issuer, or audience. An attacker can generate a JWT token from any issuer with the `preferred_username` set to any user, and the broker will accept it. We advise the Kafka users using kafka v4.1.0 or v4.1.1 to set the config `sasl.oauthbearer.jwt.validator.class` to `org.apache.kafka.common.security.oauthbearer.BrokerJwtValidator` explicitly to avoid this vulnerability. Since Kafka v4.1.2 and v4.2.0 and later, the issue is fixed and will correctly validate the JWT token.
Authlib is a Python library which builds OAuth and OpenID Connect servers. From version 1.6.5 to before version 1.6.7, previous tests involving passing a malicious JWT containing alg: none and an empty signature was passing the signature verification step without any changes to the application code when a failure was expected.. This issue has been patched in version 1.6.7.
A flaw was found in Undertow. A remote attacker can exploit this vulnerability by sending `\r\r\r` as a header block terminator. This can be used for request smuggling with certain proxy servers, such as older versions of Apache Traffic Server and Google Cloud Classic Application Load Balancer, potentially leading to unauthorized access or manipulation of web requests.
A flaw was found in Undertow. This vulnerability allows a remote attacker to construct specially crafted requests where header names are parsed differently by Undertow compared to upstream proxies. This discrepancy in header interpretation can be exploited to launch request smuggling attacks, potentially bypassing security controls and accessing unauthorized resources.
Open Neural Network Exchange (ONNX) is an open standard for machine learning interoperability. In versions up to and including 1.20.1, a security control bypass exists in onnx.hub.load() due to improper logic in the repository trust verification mechanism. While the function is designed to warn users when loading models from non-official sources, the use of the silent=True parameter completely suppresses all security warnings and confirmation prompts. This vulnerability transforms a standard model-loading function into a vector for Zero-Interaction Supply-Chain Attacks. When chained with file-system vulnerabilities, an attacker can silently exfiltrate sensitive files (SSH keys, cloud credentials) from the victim's machine the moment the model is loaded. As of time of publication, no known patched versions are available.
Authlib is a Python library which builds OAuth and OpenID Connect servers. Prior to version 1.6.9, a library-level vulnerability was identified in the Authlib Python library concerning the validation of OpenID Connect (OIDC) ID Tokens. Specifically, the internal hash verification logic (_verify_hash) responsible for validating the at_hash (Access Token Hash) and c_hash (Authorization Code Hash) claims exhibits a fail-open behavior when encountering an unsupported or unknown cryptographic algorithm. This flaw allows an attacker to bypass mandatory integrity protections by supplying a forged ID Token with a deliberately unrecognized alg header parameter. The library intercepts the unsupported state and silently returns True (validation passed), inherently violating fundamental cryptographic design principles and direct OIDC specifications. This issue has been patched in version 1.6.9.
When safe filter is used with variable expansion, all following pipelines on the same string are incorrectly interpreted as safe too, enabling unsafe data to be unescaped. This can enable SQL / LDAP injection attacks when used in authentication. Avoid using safe filter until on fixed version. No publicly available exploits are known.
Missing Authentication for Critical Function (CWE-306) vulnerability in Apache Artemis, Apache ActiveMQ Artemis. An unauthenticated remote attacker can use the Core protocol to force a target broker to establish an outbound Core federation connection to an attacker-controlled rogue broker. This could potentially result in message injection into any queue and/or message exfiltration from any queue via the rogue broker. This impacts environments that allow both: - incoming Core protocol connections from untrusted sources to the broker - outgoing Core protocol connections from the broker to untrusted targets This issue affects: - Apache Artemis from 2.50.0 through 2.51.0 - Apache ActiveMQ Artemis from 2.11.0 through 2.44.0. Users are recommended to upgrade to Apache Artemis version 2.52.0, which fixes the issue. The issue can be mitigated by one of the following: - Remove Core protocol support from any acceptor receiving connections from untrusted sources. Incoming Core protocol connections are supported by default via the "artemis" acceptor listening on port 61616. See the "protocols" URL parameter configured for the acceptor. An acceptor URL without this parameter supports all protocols by default, including Core. - Use two-way SSL (i.e. certificate-based authentication) in order to force every client to present the proper SSL certificate when establishing a connection before any message protocol handshake is attempted. This will prevent unauthenticated exploitation of this vulnerability. - Implement and deploy a Core interceptor to deny all Core downstream federation connect packets. Such packets have a type of (int) -16 or (byte) 0xfffffff0. Documentation for interceptors is available at https://artemis.apache.org/components/artemis/documentation/latest/intercepting-operations.html .
Axios is a promise based HTTP client for the browser and Node.js. From 1.0.0 to before 1.15.2, he Axios library is vulnerable to a Prototype Pollution "Gadget" attack that allows any Object.prototype pollution in the application's dependency tree to be escalated into surgical, invisible modification of all JSON API responses — including privilege escalation, balance manipulation, and authorization bypass. The default transformResponse function at lib/defaults/index.js:124 calls JSON.parse(data, this.parseReviver), where this is the merged config object. Because parseReviver is not present in Axios defaults, not validated by assertOptions, and not subject to any constraints, a polluted Object.prototype.parseReviver function is called for every key-value pair in every JSON response, allowing the attacker to selectively modify individual values while leaving the rest of the response intact. This vulnerability is fixed in 1.15.2.
In certain circumstances, Spring Boot's default web security is ineffective allowing unauthorized access to all endpoints. For an application to be vulnerable, it must: be a servlet-based web application; have no Spring Security configuration of its own and rely on the default web security filter chain; depend on spring-boot-actuator-autoconfigure; not depend on spring-boot-health. If any of the above does not apply, the application is not vulnerable. Affected: Spring Boot 4.0.0–4.0.5; upgrade to 4.0.6 or later per vendor advisory.
Authlib is a Python library which builds OAuth and OpenID Connect servers. Prior to version 1.6.9, a JWK Header Injection vulnerability in authlib's JWS implementation allows an unauthenticated attacker to forge arbitrary JWT tokens that pass signature verification. When key=None is passed to any JWS deserialization function, the library extracts and uses the cryptographic key embedded in the attacker-controlled JWT jwk header field. An attacker can sign a token with their own private key, embed the matching public key in the header, and have the server accept the forged token as cryptographically valid — bypassing authentication and authorization entirely. This issue has been patched in version 1.6.9.