Sangoma FreePBX Endpoint Manager contains an OS command injection vulnerability that could allow for a post-authentication command injection by an authenticated known user via the testconnection -> check_ssh_connect() function. An attacker can leverage this vulnerability to potentially obtain remote access to the system as an asterisk user.
Apply mitigations per vendor instructions, follow applicable BOD 22-01 guidance for cloud services, or discontinue use of the product if mitigations are unavailable.
The Web Set Media Image function in ASUS BMC’s firmware Web management page does not filter the specific parameter. As obtaining the administrator permission, remote attackers can launch command injection to execute command arbitrary.
OS command injection in the admin panel of Ivanti EPMM before version 12.6.0.2, 12.5.0.4, and 12.4.0.4 allows a remote authenticated attacker with admin privileges to achieve remote code execution.
Multiple vulnerabilities in the web management interface of Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system. The attacker would need valid device credentials but does not require administrator privileges to exploit this vulnerability. These vulnerabilities are due to insufficient validation of user-supplied input for certain configuration options. An attacker could exploit these vulnerabilities by using crafted input within the device configuration GUI. A successful exploit could allow the attacker to execute arbitrary commands on the device including the underlying operating system which could also affect the availability of the device.
An issue was discovered in Poly EagleEye Director II before 2.2.2.1. os.system command injection can be achieved by an admin.
Multiple vulnerabilities in Cisco Identity Services Engine (ISE) could allow an authenticated attacker to perform command injection attacks on the underlying operating system and elevate privileges to root. To exploit these vulnerabilities, an attacker must have valid credentials on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
In Flowmon versions prior to 12.5.5, a vulnerability has been identified that allows a user with administrator privileges and access to the management interface to execute additional unintended commands within scripts intended for troubleshooting purposes.
A security vulnerability has been detected in Wavlink WL-NU516U1 240425. This vulnerability affects the function sub_4012A0 of the file /cgi-bin/login.cgi. Such manipulation of the argument ipaddr leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
OS command injection in the admin panel of Ivanti EPMM before version 12.6.0.2, 12.5.0.4, and 12.4.0.4 allows a remote authenticated attacker with admin privileges to achieve remote code execution.
HCL DevOps Deploy / HCL Launch could allow a remote privileged authenticated attacker to execute arbitrary commands on the system by sending specially crafted input containing special elements.
This vulnerability involves command injection in tcpdump within Moxa products, enabling an authenticated attacker with console access to exploit improper input validation to inject and execute systems commands. Successful exploitation could result in privilege escalation, allowing the attacker to gain root shell access and maintain persistent control over the device, potentially disrupting network services and affecting the availability of downstream systems that rely on its connectivity.
A vulnerability, which was classified as critical, has been found in Tenda AC8, AC10 and AC18 16.03.10.20. Affected by this issue is some unknown functionality of the file /goform/telnet of the component HTTP Request Handler. The manipulation leads to command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.
A vulnerability was identified in Linksys MR9600 2.0.6.206937. This affects the function BTRequestGetSmartConnectStatus of the file /etc/init.d/run_central2.sh of the component JNAP Action Handler. The manipulation of the argument pin leads to os command injection. The attack may be initiated remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.
A privileged attacker in GeoNetwork before 3.12.0 and 4.x before 4.0.4 can use the directory harvester before-script to execute arbitrary OS commands remotely on the hosting infrastructure. A User Administrator or Administrator account is required to perform this. This occurs in the runBeforeScript method in harvesters/src/main/java/org/fao/geonet/kernel/harvest/harvester/localfilesystem/LocalFilesystemHarvester.java. The earliest affected version is 3.4.0.
NEC Corporation Aterm WX1500HP Ver.1.4.2 and earlier and WX3600HP Ver.1.5.3 and earlier allows a attacker to execute arbitrary OS commands via the network.
A post-authentication command injection vulnerability in the "host" parameter of the diagnostic function in Zyxel VMG4005-B50A firmware versions through V5.15(ABQA.2.2)C0 could allow an authenticated attacker with administrator privileges to execute operating system (OS) commands on a vulnerable device.
The affected product permits OS command injection through improperly restricted commands, potentially allowing attackers to execute arbitrary code.
An OS command injection vulnerability in the admin web console of Ivanti CSA before version 5.0.2 allows a remote authenticated attacker with admin privileges to obtain remote code execution.
Nozomi Networks Labs identified a CWE-78: Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') in the Administration WebUI in Waterfall WF-500 TX Host in version 7.9.1.0 R2502171040 that allows remote authenticated attackers to execute arbitrary operating system commands on the WF-500 TX Host.
Nozomi Networks Labs identified a CWE-78: Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') in the Administration WebUI in Waterfall WF-500 RX Host in version 7.9.1.0 R2502171040 that allows remote authenticated attackers to execute arbitrary operating system commands on the WF-500 RX Host.
Cypress Solutions CTM-200 2.7.1 contains an authenticated command injection vulnerability in the firmware upgrade script that allows remote attackers to execute shell commands. Attackers can exploit the 'fw_url' parameter in the ctm-config-upgrade.sh script to inject and execute arbitrary commands with root privileges.
A vulnerability in the Cisco IOx application hosting environment could allow an authenticated, remote attacker to execute arbitrary commands as root on the underlying host operating system. This vulnerability is due to incomplete sanitization of parameters that are passed in for activation of an application. An attacker could exploit this vulnerability by deploying and activating an application in the Cisco IOx application hosting environment with a crafted activation payload file. A successful exploit could allow the attacker to execute arbitrary commands as root on the underlying host operating system.
A privilege escalation vulnerability in Palo Alto Networks PAN-OS software allows a PAN-OS administrator with access to the management web interface to perform actions on the firewall with root privileges. Cloud NGFW and Prisma Access are not impacted by this vulnerability.
The Total Upkeep – WordPress Backup Plugin plus Restore & Migrate by BoldGrid plugin for WordPress is vulnerable to Remote Code Execution in all versions up to, and including, 1.16.6 via the cron_interval parameter. This is due to missing input validation and sanitization. This makes it possible for authenticated attackers, with Administrator-level access and above, to execute code on the server.
A vulnerability has been found in Tenda AC6 2.0/15.03.06.23. The affected element is an unknown function of the file /goform/telnet of the component httpd. The manipulation of the argument lan.ip leads to os command injection. Remote exploitation of the attack is possible. The exploit has been disclosed to the public and may be used.
An input validation weakness was discovered in XCC that could allow a valid, authenticated XCC user with elevated privileges to perform command injection or cause a recoverable denial of service using a specially crafted file.
A privilege escalation vulnerability was discovered in XCC that could allow a valid, authenticated XCC user with elevated privileges to perform command injection via specially crafted file uploads.
OS Command Injection vulnerability when changing date settings or hostname using web GUI of Nozomi Networks Guardian and CMC allows authenticated administrators to perform remote code execution. This issue affects: Nozomi Networks Guardian 20.0.7.3 version 20.0.7.3 and prior versions. Nozomi Networks CMC 20.0.7.3 version 20.0.7.3 and prior versions.
PTZOptics PT30X-SDI/NDI-xx before firmware 6.3.40 is vulnerable to an OS command injection issue. The camera does not sufficiently validate the ntp_addr configuration value which may lead to arbitrary command execution when ntp_client is started. When chained with CVE-2024-8956, a remote and unauthenticated attacker can execute arbitrary OS commands on affected devices.
An OS command injection vulnerability in Ivanti Cloud Services Appliance versions 4.6 Patch 518 and before allows a remote authenticated attacker to obtain remote code execution. The attacker must have admin level privileges to exploit this vulnerability.
A command injection vulnerability in Palo Alto Networks PAN-OS software enables an authenticated administrator to bypass system restrictions and run arbitrary commands as root on the firewall.
A privilege escalation vulnerability was discovered in XCC that could allow a valid, authenticated XCC user with elevated privileges to perform command injection via specially crafted IPMI commands.
An input validation weakness was discovered in XCC that could allow a valid, authenticated XCC user with elevated privileges to perform command injection through specially crafted command line input in the XCC SSH captive shell.
Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Dual Gigabit WAN VPN Routers could allow an authenticated, remote attacker to inject and execute arbitrary commands on the underlying operating system of an affected device. These vulnerabilities are due to insufficient validation of user-supplied input. An attacker could exploit these vulnerabilities by sending malicious input to an affected device. A successful exploit could allow the attacker to execute arbitrary commands as the root user on the underlying Linux operating system of the affected device. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates to address these vulnerabilities.
Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Dual Gigabit WAN VPN Routers could allow an authenticated, remote attacker to inject and execute arbitrary commands on the underlying operating system of an affected device. These vulnerabilities are due to insufficient validation of user-supplied input. An attacker could exploit these vulnerabilities by sending malicious input to an affected device. A successful exploit could allow the attacker to execute arbitrary commands as the root user on the underlying Linux operating system of the affected device. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates to address these vulnerabilities.
A vulnerability in the web-based management interface of Cisco Small Business RV340, RV340W, RV345, and RV345P Dual WAN Gigabit VPN Routers could allow an authenticated, remote attacker to execute arbitrary code or cause the web-based management process on the device to restart unexpectedly, resulting in a denial of service (DoS) condition. The attacker must have valid administrator credentials. This vulnerability is due to insufficient validation of user-supplied input to the web-based management interface. An attacker could exploit this vulnerability by sending crafted HTTP input to an affected device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system or cause the web-based management process to restart, resulting in a DoS condition.
The specific CGI of the CAYIN Technology CMS does not properly validate user input, allowing a remote attacker with administrator privileges to inject OS commands into the specific parameter and execute them on the remote server.
A remote authenticated command injection vulnerability was discovered in Aruba ClearPass Policy Manager version(s): Prior to 6.9.5, 6.8.8-HF1, 6.7.14-HF1. A vulnerability in the ClearPass web-based management interface allows remote authenticated users to run arbitrary commands on the underlying host. A successful exploit could allow an attacker to execute arbitrary commands as root on the underlying operating system leading to complete system compromise.
NetModule NSRW web administration interface executes an OS command constructed with unsanitized user input. A successful exploit could allow an authenticated user to execute arbitrary commands with elevated privileges. This issue affects NSRW: from 4.3.0.0 before 4.3.0.119, from 4.4.0.0 before 4.4.0.118, from 4.6.0.0 before 4.6.0.105, from 4.7.0.0 before 4.7.0.103.
Improper Input Validation vulnerability in Progress LoadMaster allows OS Command Injection.This issue affects: * LoadMaster: 7.2.40.0 and above * ECS: All versions * Multi-Tenancy: 7.1.35.4 and above
Rittal CMC PU III Web management Version affected: V3.11.00_2. Version fixed: V3.17.10 is affected by a remote code execution vulnerablity. It is possible to introduce shell code to create a reverse shell in the PU-Hostname field of the TCP/IP Configuration dialog. Web application fails to sanitize user input on Network TCP/IP configuration page. This allows the attacker to inject commands as root on the device which will be executed once the data is received.
A remote authenticated command injection vulnerability was discovered in Aruba ClearPass Policy Manager version(s): Prior to 6.9.5, 6.8.8-HF1, 6.7.14-HF1. A vulnerability in the ClearPass web-based management interface allows remote authenticated users to run arbitrary commands on the underlying host. A successful exploit could allow an attacker to execute arbitrary commands as root on the underlying operating system leading to complete system compromise.
A post-authentication command injection vulnerability in Zyxel ATP series firmware versions from V4.60 through V5.38 and USG FLEX series firmware versions from V4.60 through V5.38 could allow an authenticated attacker with administrator privileges to execute some operating system (OS) commands on an affected device by executing a crafted CLI command.
A remote authenticated command injection vulnerability was discovered in Aruba ClearPass Policy Manager version(s): Prior to 6.9.5, 6.8.8-HF1, 6.7.14-HF1. A vulnerability in the ClearPass web-based management interface allows remote authenticated users to run arbitrary commands on the underlying host. A successful exploit could allow an attacker to execute arbitrary commands as root on the underlying operating system leading to complete system compromise.
A vulnerability was found in D-Link DIR-882 1.01B02. Impacted is the function sprintf of the file prog.cgi of the component HNAP1 SetNetworkSettings Handler. The manipulation of the argument IPAddress results in os command injection. The attack may be performed from remote. The exploit has been made public and could be used. This vulnerability only affects products that are no longer supported by the maintainer.
A high privileged remote attacker can execute arbitrary system commands via GET requests due to improper neutralization of special elements used in an OS command.
A vulnerability in GL.iNET GL-E750 Mudi before firmware v3.216 allows authenticated attackers to execute arbitrary code via a crafted POST request.
A remote authenticated command Injection vulnerability was discovered in Aruba ClearPass Policy Manager version(s): Prior to 6.9.5, 6.8.8-HF1, 6.7.14-HF1. A vulnerability in the ClearPass CLI could allow remote authenticated users to run arbitrary commands on the underlying host. A successful exploit could allow an attacker to execute arbitrary commands as root on the underlying operating system leading to complete system compromise.
NetApp OnCommand System Manager 2.1 and earlier allows remote attackers to inject arbitrary commands in the Halt/Reboot interface.
MaxKB, which stands for Max Knowledge Base, is an open source knowledge base question-answering system based on a large language model and retrieval-augmented generation (RAG). Prior to version 1.9.0, a remote command execution vulnerability exists in the module of function library. The vulnerability allow privileged users to execute OS command in custom scripts. The vulnerability has been fixed in v1.9.0.
The Cron job tab in EasyCorp ZenTao 12.5.3 allows remote attackers (who have admin access) to execute arbitrary code by setting the type parameter to System.