In the Linux kernel, the following vulnerability has been resolved: media: usb: go7007: s2250-board: fix leak in probe() Call i2c_unregister_device(audio) on this error path.

In the Linux kernel, the following vulnerability has been resolved: io_uring: fix memory leak of uid in files registration When there are no files for __io_sqe_files_scm() to process in the range, it'll free everything and return. However, it forgets to put uid.

In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Fix resource leak in lpfc_sli4_send_seq_to_ulp() If no handler is found in lpfc_complete_unsol_iocb() to match the rctl of a received frame, the frame is dropped and resources are leaked. Fix by returning resources when discarding an unhandled frame type. Update lpfc_fc_frame_check() handling of NOP basic link service.

In the Linux kernel, the following vulnerability has been resolved: scsi: pm8001: Fix tag leaks on error In pm8001_chip_set_dev_state_req(), pm8001_chip_fw_flash_update_req(), pm80xx_chip_phy_ctl_req() and pm8001_chip_reg_dev_req() add missing calls to pm8001_tag_free() to free the allocated tag when pm8001_mpi_build_cmd() fails. Similarly, in pm8001_exec_internal_task_abort(), if the chip ->task_abort method fails, the tag allocated for the abort request task must be freed. Add the missing call to pm8001_tag_free().

In the Linux kernel, the following vulnerability has been resolved: i2c: piix4: Fix a memory leak in the EFCH MMIO support The recently added support for EFCH MMIO regions introduced a memory leak in that code path. The leak is caused by the fact that release_resource() merely removes the resource from the tree but does not free its memory. We need to call release_mem_region() instead, which does free the memory. As a nice side effect, this brings back some symmetry between the legacy and MMIO paths.

In the Linux kernel, the following vulnerability has been resolved: brcmfmac: pcie: Release firmwares in the brcmf_pcie_setup error path This avoids leaking memory if brcmf_chip_get_raminfo fails. Note that the CLM blob is released in the device remove path.

In the Linux kernel, the following vulnerability has been resolved: rtw88: fix memory overrun and memory leak during hw_scan Previously we allocated less memory than actual required, overwrite to the buffer causes the mm module to complaint and raise access violation faults. Along with potential memory leaks when returned early. Fix these by passing the correct size and proper deinit flow.

In the Linux kernel, the following vulnerability has been resolved: rtw89: ser: fix CAM leaks occurring in L2 reset The CAM, meaning address CAM and bssid CAM here, will get leaks during SER (system error recover) L2 reset process and ieee80211_restart_hw() which is called by L2 reset process eventually. The normal flow would be like -> add interface (acquire 1) -> enter ips (release 1) -> leave ips (acquire 1) -> connection (occupy 1) <(A) 1 leak after L2 reset if non-sec connection> The ieee80211_restart_hw() flow (under connection) -> ieee80211 reconfig -> add interface (acquire 1) -> leave ips (acquire 1) -> connection (occupy (A) + 2) <(B) 1 more leak> Originally, CAM is released before HW restart only if connection is under security. Now, release CAM whatever connection it is to fix leak in (A). OTOH, check if CAM is already valid to avoid acquiring multiple times to fix (B). Besides, if AP mode, release address CAM of all stations before HW restart.

In the Linux kernel, the following vulnerability has been resolved: bridge: switchdev: Fix memory leaks when changing VLAN protocol The bridge driver can offload VLANs to the underlying hardware either via switchdev or the 8021q driver. When the former is used, the VLAN is marked in the bridge driver with the 'BR_VLFLAG_ADDED_BY_SWITCHDEV' private flag. To avoid the memory leaks mentioned in the cited commit, the bridge driver will try to delete a VLAN via the 8021q driver if the VLAN is not marked with the previously mentioned flag. When the VLAN protocol of the bridge changes, switchdev drivers are notified via the 'SWITCHDEV_ATTR_ID_BRIDGE_VLAN_PROTOCOL' attribute, but the 8021q driver is also called to add the existing VLANs with the new protocol and delete them with the old protocol. In case the VLANs were offloaded via switchdev, the above behavior is both redundant and buggy. Redundant because the VLANs are already programmed in hardware and drivers that support VLAN protocol change (currently only mlx5) change the protocol upon the switchdev attribute notification. Buggy because the 8021q driver is called despite these VLANs being marked with 'BR_VLFLAG_ADDED_BY_SWITCHDEV'. This leads to memory leaks [1] when the VLANs are deleted. Fix by not calling the 8021q driver for VLANs that were already programmed via switchdev. [1] unreferenced object 0xffff8881f6771200 (size 256): comm "ip", pid 446855, jiffies 4298238841 (age 55.240s) hex dump (first 32 bytes): 00 00 7f 0e 83 88 ff ff 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000012819ac>] vlan_vid_add+0x437/0x750 [<00000000f2281fad>] __br_vlan_set_proto+0x289/0x920 [<000000000632b56f>] br_changelink+0x3d6/0x13f0 [<0000000089d25f04>] __rtnl_newlink+0x8ae/0x14c0 [<00000000f6276baf>] rtnl_newlink+0x5f/0x90 [<00000000746dc902>] rtnetlink_rcv_msg+0x336/0xa00 [<000000001c2241c0>] netlink_rcv_skb+0x11d/0x340 [<0000000010588814>] netlink_unicast+0x438/0x710 [<00000000e1a4cd5c>] netlink_sendmsg+0x788/0xc40 [<00000000e8992d4e>] sock_sendmsg+0xb0/0xe0 [<00000000621b8f91>] ____sys_sendmsg+0x4ff/0x6d0 [<000000000ea26996>] ___sys_sendmsg+0x12e/0x1b0 [<00000000684f7e25>] __sys_sendmsg+0xab/0x130 [<000000004538b104>] do_syscall_64+0x3d/0x90 [<0000000091ed9678>] entry_SYSCALL_64_after_hwframe+0x46/0xb0

In the Linux kernel, the following vulnerability has been resolved: iavf: Fix handling of dummy receive descriptors Fix memory leak caused by not handling dummy receive descriptor properly. iavf_get_rx_buffer now sets the rx_buffer return value for dummy receive descriptors. Without this patch, when the hardware writes a dummy descriptor, iavf would not free the page allocated for the previous receive buffer. This is an unlikely event but can still happen. [Jesse: massaged commit message]

In the Linux kernel, the following vulnerability has been resolved: lib/string_helpers: fix not adding strarray to device's resource list Add allocated strarray to device's resource list. This is a must to automatically release strarray when the device disappears. Without this fix we have a memory leak in the few drivers which use devm_kasprintf_strarray().

In the Linux kernel, the following vulnerability has been resolved: mt76: mt7921s: fix a possible memory leak in mt7921_load_patch Always release fw data at the end of mt7921_load_patch routine.

In the Linux kernel, the following vulnerability has been resolved: staging: rtl8712: fix a potential memory leak in r871xu_drv_init() In r871xu_drv_init(), if r8712_init_drv_sw() fails, then the memory allocated by r8712_alloc_io_queue() in r8712_usb_dvobj_init() is not properly released as there is no action will be performed by r8712_usb_dvobj_deinit(). To properly release it, we should call r8712_free_io_queue() in r8712_usb_dvobj_deinit(). Besides, in r871xu_dev_remove(), r8712_usb_dvobj_deinit() will be called by r871x_dev_unload() under condition `padapter->bup` and r8712_free_io_queue() is called by r8712_free_drv_sw(). However, r8712_usb_dvobj_deinit() does not rely on `padapter->bup` and calling r8712_free_io_queue() in r8712_free_drv_sw() is negative for better understading the code. So I move r8712_usb_dvobj_deinit() into r871xu_dev_remove(), and remove r8712_free_io_queue() from r8712_free_drv_sw().

In the Linux kernel, the following vulnerability has been resolved: scsi: zorro7xx: Fix a resource leak in zorro7xx_remove_one() The error handling path of the probe releases a resource that is not freed in the remove function. In some cases, a ioremap() must be undone. Add the missing iounmap() call in the remove function.

In the Linux kernel, the following vulnerability has been resolved: net/x25: Fix skb leak in x25_lapb_receive_frame() x25_lapb_receive_frame() using skb_copy() to get a private copy of skb, the new skb should be freed in the undersized/fragmented skb error handling path. Otherwise there is a memory leak.

In the Linux kernel, the following vulnerability has been resolved: amt: fix possible memory leak in amt_rcv() If an amt receives packets and it finds socket. If it can't find a socket, it should free a received skb. But it doesn't. So, a memory leak would possibly occur.

In the Linux kernel, the following vulnerability has been resolved: dmaengine: ti: k3-udma-glue: fix memory leak when register device fail If device_register() fails, it should call put_device() to give up reference, the name allocated in dev_set_name() can be freed in callback function kobject_cleanup().

In the Linux kernel, the following vulnerability has been resolved: amt: fix memory leak for advertisement message When a gateway receives an advertisement message, it extracts relay information and then it should be freed. But the advertisement handler doesn't free it. So, memory leak would occur.

In the Linux kernel, the following vulnerability has been resolved: mISDN: fix possible memory leak in mISDN_register_device() Afer commit 1fa5ae857bb1 ("driver core: get rid of struct device's bus_id string array"), the name of device is allocated dynamically, add put_device() to give up the reference, so that the name can be freed in kobject_cleanup() when the refcount is 0. Set device class before put_device() to avoid null release() function WARN message in device_release().

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: memleak flow rule from commit path Abort path release flow rule object, however, commit path does not. Update code to destroy these objects before releasing the transaction.

In the Linux kernel, the following vulnerability has been resolved: platform/x86: thinkpad_acpi: Fix a memory leak of EFCH MMIO resource Unlike release_mem_region(), a call to release_resource() does not free the resource, so it has to be freed explicitly to avoid a memory leak.

In the Linux kernel, the following vulnerability has been resolved: net: wwan: iosm: fix memory leak in ipc_wwan_dellink IOSM driver registers network device without setting the needs_free_netdev flag, and does NOT call free_netdev() when unregisters network device, which causes a memory leak. This patch sets needs_free_netdev to true when registers network device, which makes netdev subsystem call free_netdev() automatically after unregister_netdevice().

In the Linux kernel, the following vulnerability has been resolved: siox: fix possible memory leak in siox_device_add() If device_register() returns error in siox_device_add(), the name allocated by dev_set_name() need be freed. As comment of device_register() says, it should use put_device() to give up the reference in the error path. So fix this by calling put_device(), then the name can be freed in kobject_cleanup(), and sdevice is freed in siox_device_release(), set it to null in error path.

In the Linux kernel, the following vulnerability has been resolved: kernel/resource: fix kfree() of bootmem memory again Since commit ebff7d8f270d ("mem hotunplug: fix kfree() of bootmem memory"), we could get a resource allocated during boot via alloc_resource(). And it's required to release the resource using free_resource(). Howerver, many people use kfree directly which will result in kernel BUG. In order to fix this without fixing every call site, just leak a couple of bytes in such corner case.

In the Linux kernel, the following vulnerability has been resolved: powerpc/papr_scm: Fix leaking nvdimm_events_map elements Right now 'char *' elements allocated for individual 'stat_id' in 'papr_scm_priv.nvdimm_events_map[]' during papr_scm_pmu_check_events(), get leaked in papr_scm_remove() and papr_scm_pmu_register(), papr_scm_pmu_check_events() error paths. Also individual 'stat_id' arent NULL terminated 'char *' instead they are fixed 8-byte sized identifiers. However papr_scm_pmu_register() assumes it to be a NULL terminated 'char *' and at other places it assumes it to be a 'papr_scm_perf_stat.stat_id' sized string which is 8-byes in size. Fix this by allocating the memory for papr_scm_priv.nvdimm_events_map to also include space for 'stat_id' entries. This is possible since number of available events/stat_ids are known upfront. This saves some memory and one extra level of indirection from 'nvdimm_events_map' to 'stat_id'. Also rest of the code can continue to call 'kfree(papr_scm_priv.nvdimm_events_map)' without needing to iterate over the array and free up individual elements.

In the Linux kernel, the following vulnerability has been resolved: ALSA: hda: fix potential memleak in 'add_widget_node' As 'kobject_add' may allocated memory for 'kobject->name' when return error. And in this function, if call 'kobject_add' failed didn't free kobject. So call 'kobject_put' to recycling resources.

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix anon_dev leak in create_subvol() When btrfs_qgroup_inherit(), btrfs_alloc_tree_block, or btrfs_insert_root() fail in create_subvol(), we return without freeing anon_dev. Reorganize the error handling in create_subvol() to fix this.

In the Linux kernel, the following vulnerability has been resolved: memory: renesas-rpc-if: fix platform-device leak in error path Make sure to free the flash platform device in the event that registration fails during probe.

In the Linux kernel, the following vulnerability has been resolved: drivers/base/node.c: fix compaction sysfs file leak Compaction sysfs file is created via compaction_register_node in register_node. But we forgot to remove it in unregister_node. Thus compaction sysfs file is leaked. Using compaction_unregister_node to fix this issue.

In the Linux kernel, the following vulnerability has been resolved: nfc: nfcmrvl: Fix potential memory leak in nfcmrvl_i2c_nci_send() nfcmrvl_i2c_nci_send() will be called by nfcmrvl_nci_send(), and skb should be freed in nfcmrvl_i2c_nci_send(). However, nfcmrvl_nci_send() will only free skb when i2c_master_send() return >=0, which means skb will memleak when i2c_master_send() failed. Free skb no matter whether i2c_master_send() succeeds.

In the Linux kernel, the following vulnerability has been resolved: ima: Fix potential memory leak in ima_init_crypto() On failure to allocate the SHA1 tfm, IMA fails to initialize and exits without freeing the ima_algo_array. Add the missing kfree() for ima_algo_array to avoid the potential memory leak.

In the Linux kernel, the following vulnerability has been resolved: net/smc: Fix possible leaked pernet namespace in smc_init() In smc_init(), register_pernet_subsys(&smc_net_stat_ops) is called without any error handling. If it fails, registering of &smc_net_ops won't be reverted. And if smc_nl_init() fails, &smc_net_stat_ops itself won't be reverted. This leaves wild ops in subsystem linkedlist and when another module tries to call register_pernet_operations() it triggers page fault: BUG: unable to handle page fault for address: fffffbfff81b964c RIP: 0010:register_pernet_operations+0x1b9/0x5f0 Call Trace: <TASK> register_pernet_subsys+0x29/0x40 ebtables_init+0x58/0x1000 [ebtables] ...

In the Linux kernel, the following vulnerability has been resolved: RDMA/cm: Fix memory leak in ib_cm_insert_listen cm_alloc_id_priv() allocates resource for the cm_id_priv. When cm_init_listen() fails it doesn't free it, leading to memory leak. Add the missing error unwind.

In the Linux kernel, the following vulnerability has been resolved: iio: trigger: sysfs: fix possible memory leak in iio_sysfs_trig_init() dev_set_name() allocates memory for name, it need be freed when device_add() fails, call put_device() to give up the reference that hold in device_initialize(), so that it can be freed in kobject_cleanup() when the refcount hit to 0. Fault injection test can trigger this: unreferenced object 0xffff8e8340a7b4c0 (size 32): comm "modprobe", pid 243, jiffies 4294678145 (age 48.845s) hex dump (first 32 bytes): 69 69 6f 5f 73 79 73 66 73 5f 74 72 69 67 67 65 iio_sysfs_trigge 72 00 a7 40 83 8e ff ff 00 86 13 c4 f6 ee ff ff r..@............ backtrace: [<0000000074999de8>] __kmem_cache_alloc_node+0x1e9/0x360 [<00000000497fd30b>] __kmalloc_node_track_caller+0x44/0x1a0 [<000000003636c520>] kstrdup+0x2d/0x60 [<0000000032f84da2>] kobject_set_name_vargs+0x1e/0x90 [<0000000092efe493>] dev_set_name+0x4e/0x70

In the Linux kernel, the following vulnerability has been resolved: net: tun: Fix memory leaks of napi_get_frags kmemleak reports after running test_progs: unreferenced object 0xffff8881b1672dc0 (size 232): comm "test_progs", pid 394388, jiffies 4354712116 (age 841.975s) hex dump (first 32 bytes): e0 84 d7 a8 81 88 ff ff 80 2c 67 b1 81 88 ff ff .........,g..... 00 40 c5 9b 81 88 ff ff 00 00 00 00 00 00 00 00 .@.............. backtrace: [<00000000c8f01748>] napi_skb_cache_get+0xd4/0x150 [<0000000041c7fc09>] __napi_build_skb+0x15/0x50 [<00000000431c7079>] __napi_alloc_skb+0x26e/0x540 [<000000003ecfa30e>] napi_get_frags+0x59/0x140 [<0000000099b2199e>] tun_get_user+0x183d/0x3bb0 [tun] [<000000008a5adef0>] tun_chr_write_iter+0xc0/0x1b1 [tun] [<0000000049993ff4>] do_iter_readv_writev+0x19f/0x320 [<000000008f338ea2>] do_iter_write+0x135/0x630 [<000000008a3377a4>] vfs_writev+0x12e/0x440 [<00000000a6b5639a>] do_writev+0x104/0x280 [<00000000ccf065d8>] do_syscall_64+0x3b/0x90 [<00000000d776e329>] entry_SYSCALL_64_after_hwframe+0x63/0xcd The issue occurs in the following scenarios: tun_get_user() napi_gro_frags() napi_frags_finish() case GRO_NORMAL: gro_normal_one() list_add_tail(&skb->list, &napi->rx_list); <-- While napi->rx_count < READ_ONCE(gro_normal_batch), <-- gro_normal_list() is not called, napi->rx_list is not empty <-- not ask to complete the gro work, will cause memory leaks in <-- following tun_napi_del() ... tun_napi_del() netif_napi_del() __netif_napi_del() <-- &napi->rx_list is not empty, which caused memory leaks To fix, add napi_complete() after napi_gro_frags().

In the Linux kernel, the following vulnerability has been resolved: thermal/core: Fix memory leak in __thermal_cooling_device_register() I got memory leak as follows when doing fault injection test: unreferenced object 0xffff888010080000 (size 264312): comm "182", pid 102533, jiffies 4296434960 (age 10.100s) hex dump (first 32 bytes): 00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00 .....N.......... ff ff ff ff ff ff ff ff 40 7f 1f b9 ff ff ff ff ........@....... backtrace: [<0000000038b2f4fc>] kmalloc_order_trace+0x1d/0x110 mm/slab_common.c:969 [<00000000ebcb8da5>] __kmalloc+0x373/0x420 include/linux/slab.h:510 [<0000000084137f13>] thermal_cooling_device_setup_sysfs+0x15d/0x2d0 include/linux/slab.h:586 [<00000000352b8755>] __thermal_cooling_device_register+0x332/0xa60 drivers/thermal/thermal_core.c:927 [<00000000fb9f331b>] devm_thermal_of_cooling_device_register+0x6b/0xf0 drivers/thermal/thermal_core.c:1041 [<000000009b8012d2>] max6650_probe.cold+0x557/0x6aa drivers/hwmon/max6650.c:211 [<00000000da0b7e04>] i2c_device_probe+0x472/0xac0 drivers/i2c/i2c-core-base.c:561 If device_register() fails, thermal_cooling_device_destroy_sysfs() need be called to free the memory allocated in thermal_cooling_device_setup_sysfs().

In the Linux kernel, the following vulnerability has been resolved: usb: dwc2: Fix memory leak in dwc2_hcd_init usb_create_hcd will alloc memory for hcd, and we should call usb_put_hcd to free it when platform_get_resource() fails to prevent memory leak. goto error2 label instead error1 to fix this.

In the Linux kernel, the following vulnerability has been resolved: perf/x86/amd/uncore: Fix memory leak for events array When a CPU comes online, the per-CPU NB and LLC uncore contexts are freed but not the events array within the context structure. This causes a memory leak as identified by the kmemleak detector. [...] unreferenced object 0xffff8c5944b8e320 (size 32): comm "swapper/0", pid 1, jiffies 4294670387 (age 151.072s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<000000000759fb79>] amd_uncore_cpu_up_prepare+0xaf/0x230 [<00000000ddc9e126>] cpuhp_invoke_callback+0x2cf/0x470 [<0000000093e727d4>] cpuhp_issue_call+0x14d/0x170 [<0000000045464d54>] __cpuhp_setup_state_cpuslocked+0x11e/0x330 [<0000000069f67cbd>] __cpuhp_setup_state+0x6b/0x110 [<0000000015365e0f>] amd_uncore_init+0x260/0x321 [<00000000089152d2>] do_one_initcall+0x3f/0x1f0 [<000000002d0bd18d>] kernel_init_freeable+0x1ca/0x212 [<0000000030be8dde>] kernel_init+0x11/0x120 [<0000000059709e59>] ret_from_fork+0x22/0x30 unreferenced object 0xffff8c5944b8dd40 (size 64): comm "swapper/0", pid 1, jiffies 4294670387 (age 151.072s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000306efe8b>] amd_uncore_cpu_up_prepare+0x183/0x230 [<00000000ddc9e126>] cpuhp_invoke_callback+0x2cf/0x470 [<0000000093e727d4>] cpuhp_issue_call+0x14d/0x170 [<0000000045464d54>] __cpuhp_setup_state_cpuslocked+0x11e/0x330 [<0000000069f67cbd>] __cpuhp_setup_state+0x6b/0x110 [<0000000015365e0f>] amd_uncore_init+0x260/0x321 [<00000000089152d2>] do_one_initcall+0x3f/0x1f0 [<000000002d0bd18d>] kernel_init_freeable+0x1ca/0x212 [<0000000030be8dde>] kernel_init+0x11/0x120 [<0000000059709e59>] ret_from_fork+0x22/0x30 [...] Fix the problem by freeing the events array before freeing the uncore context.

In the Linux kernel, the following vulnerability has been resolved: hugetlbfs: don't delete error page from pagecache This change is very similar to the change that was made for shmem [1], and it solves the same problem but for HugeTLBFS instead. Currently, when poison is found in a HugeTLB page, the page is removed from the page cache. That means that attempting to map or read that hugepage in the future will result in a new hugepage being allocated instead of notifying the user that the page was poisoned. As [1] states, this is effectively memory corruption. The fix is to leave the page in the page cache. If the user attempts to use a poisoned HugeTLB page with a syscall, the syscall will fail with EIO, the same error code that shmem uses. For attempts to map the page, the thread will get a BUS_MCEERR_AR SIGBUS. [1]: commit a76054266661 ("mm: shmem: don't truncate page if memory failure happens")

In the Linux kernel, the following vulnerability has been resolved: auxdisplay: lcd2s: Fix memory leak in ->remove() Once allocated the struct lcd2s_data is never freed. Fix the memory leak by switching to devm_kzalloc().

In the Linux kernel, the following vulnerability has been resolved: net: marvell: prestera: Add missing of_node_put() in prestera_switch_set_base_mac_addr This node pointer is returned by of_find_compatible_node() with refcount incremented. Calling of_node_put() to aovid the refcount leak.

In the Linux kernel, the following vulnerability has been resolved: sctp: fix memory leak in sctp_stream_outq_migrate() When sctp_stream_outq_migrate() is called to release stream out resources, the memory pointed to by prio_head in stream out is not released. The memory leak information is as follows: unreferenced object 0xffff88801fe79f80 (size 64): comm "sctp_repo", pid 7957, jiffies 4294951704 (age 36.480s) hex dump (first 32 bytes): 80 9f e7 1f 80 88 ff ff 80 9f e7 1f 80 88 ff ff ................ 90 9f e7 1f 80 88 ff ff 90 9f e7 1f 80 88 ff ff ................ backtrace: [<ffffffff81b215c6>] kmalloc_trace+0x26/0x60 [<ffffffff88ae517c>] sctp_sched_prio_set+0x4cc/0x770 [<ffffffff88ad64f2>] sctp_stream_init_ext+0xd2/0x1b0 [<ffffffff88aa2604>] sctp_sendmsg_to_asoc+0x1614/0x1a30 [<ffffffff88ab7ff1>] sctp_sendmsg+0xda1/0x1ef0 [<ffffffff87f765ed>] inet_sendmsg+0x9d/0xe0 [<ffffffff8754b5b3>] sock_sendmsg+0xd3/0x120 [<ffffffff8755446a>] __sys_sendto+0x23a/0x340 [<ffffffff87554651>] __x64_sys_sendto+0xe1/0x1b0 [<ffffffff89978b49>] do_syscall_64+0x39/0xb0 [<ffffffff89a0008b>] entry_SYSCALL_64_after_hwframe+0x63/0xcd

In the Linux kernel, the following vulnerability has been resolved: ice: Fix potential memory leak in ice_gnss_tty_write() The ice_gnss_tty_write() return directly if the write_buf alloc failed, leaking the cmd_buf. Fix by free cmd_buf if write_buf alloc failed.

In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: Fix potential memory leak in otx2_init_tc() In otx2_init_tc(), if rhashtable_init() failed, it does not free tc->tc_entries_bitmap which is allocated in otx2_tc_alloc_ent_bitmap().

In the Linux kernel, the following vulnerability has been resolved: net: ieee802154: ca8210: Stop leaking skb's Upon error the ieee802154_xmit_complete() helper is not called. Only ieee802154_wake_queue() is called manually. We then leak the skb structure. Free the skb structure upon error before returning.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: fix percpu memory leak at nf_tables_addchain() It seems to me that percpu memory for chain stats started leaking since commit 3bc158f8d0330f0a ("netfilter: nf_tables: map basechain priority to hardware priority") when nft_chain_offload_priority() returned an error.

In the Linux kernel, the following vulnerability has been resolved: net: mdiobus: fix unbalanced node reference count I got the following report while doing device(mscc-miim) load test with CONFIG_OF_UNITTEST and CONFIG_OF_DYNAMIC enabled: OF: ERROR: memory leak, expected refcount 1 instead of 2, of_node_get()/of_node_put() unbalanced - destroy cset entry: attach overlay node /spi/soc@0/mdio@7107009c/ethernet-phy@0 If the 'fwnode' is not an acpi node, the refcount is get in fwnode_mdiobus_phy_device_register(), but it has never been put when the device is freed in the normal path. So call fwnode_handle_put() in phy_device_release() to avoid leak. If it's an acpi node, it has never been get, but it's put in the error path, so call fwnode_handle_get() before phy_device_register() to keep get/put operation balanced.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: clean up hook list when offload flags check fails splice back the hook list so nft_chain_release_hook() has a chance to release the hooks. BUG: memory leak unreferenced object 0xffff88810180b100 (size 96): comm "syz-executor133", pid 3619, jiffies 4294945714 (age 12.690s) hex dump (first 32 bytes): 28 64 23 02 81 88 ff ff 28 64 23 02 81 88 ff ff (d#.....(d#..... 90 a8 aa 83 ff ff ff ff 00 00 b5 0f 81 88 ff ff ................ backtrace: [<ffffffff83a8c59b>] kmalloc include/linux/slab.h:600 [inline] [<ffffffff83a8c59b>] nft_netdev_hook_alloc+0x3b/0xc0 net/netfilter/nf_tables_api.c:1901 [<ffffffff83a9239a>] nft_chain_parse_netdev net/netfilter/nf_tables_api.c:1998 [inline] [<ffffffff83a9239a>] nft_chain_parse_hook+0x33a/0x530 net/netfilter/nf_tables_api.c:2073 [<ffffffff83a9b14b>] nf_tables_addchain.constprop.0+0x10b/0x950 net/netfilter/nf_tables_api.c:2218 [<ffffffff83a9c41b>] nf_tables_newchain+0xa8b/0xc60 net/netfilter/nf_tables_api.c:2593 [<ffffffff83a3d6a6>] nfnetlink_rcv_batch+0xa46/0xd20 net/netfilter/nfnetlink.c:517 [<ffffffff83a3db79>] nfnetlink_rcv_skb_batch net/netfilter/nfnetlink.c:638 [inline] [<ffffffff83a3db79>] nfnetlink_rcv+0x1f9/0x220 net/netfilter/nfnetlink.c:656 [<ffffffff83a13b17>] netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] [<ffffffff83a13b17>] netlink_unicast+0x397/0x4c0 net/netlink/af_netlink.c:1345 [<ffffffff83a13fd6>] netlink_sendmsg+0x396/0x710 net/netlink/af_netlink.c:1921 [<ffffffff83865ab6>] sock_sendmsg_nosec net/socket.c:714 [inline] [<ffffffff83865ab6>] sock_sendmsg+0x56/0x80 net/socket.c:734 [<ffffffff8386601c>] ____sys_sendmsg+0x36c/0x390 net/socket.c:2482 [<ffffffff8386a918>] ___sys_sendmsg+0xa8/0x110 net/socket.c:2536 [<ffffffff8386aaa8>] __sys_sendmsg+0x88/0x100 net/socket.c:2565 [<ffffffff845e5955>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<ffffffff845e5955>] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 [<ffffffff84800087>] entry_SYSCALL_64_after_hwframe+0x63/0xcd

In the Linux kernel, the following vulnerability has been resolved: can: can327: can327_feed_frame_to_netdev(): fix potential skb leak when netdev is down In can327_feed_frame_to_netdev(), it did not free the skb when netdev is down, and all callers of can327_feed_frame_to_netdev() did not free allocated skb too. That would trigger skb leak. Fix it by adding kfree_skb() in can327_feed_frame_to_netdev() when netdev is down. Not tested, just compiled.

In the Linux kernel, the following vulnerability has been resolved: dpaa2-switch: Fix memory leak in dpaa2_switch_acl_entry_add() and dpaa2_switch_acl_entry_remove() The cmd_buff needs to be freed when error happened in dpaa2_switch_acl_entry_add() and dpaa2_switch_acl_entry_remove().