Due to failure in validating the length provided by an attacker-crafted PPD PostScript document, CUPS and libppd are susceptible to a heap-based buffer overflow and possibly code execution. This issue has been fixed in CUPS version 2.4.7, released in September of 2023.

cpdb-libs provides frontend and backend libraries for the Common Printing Dialog Backends (CPDB) project. In versions 1.0 through 2.0b4, cpdb-libs is vulnerable to buffer overflows via improper use of `scanf(3)`. cpdb-libs uses the `fscanf()` and `scanf()` functions to parse command lines and configuration files, dropping the read string components into fixed-length buffers, but does not limit the length of the strings to be read by `fscanf()` and `scanf()` causing buffer overflows when a string is longer than 1023 characters. A patch for this issue is available at commit f181bd1f14757c2ae0f17cc76dc20421a40f30b7. As all buffers have a length of 1024 characters, the patch limits the maximum string length to be read to 1023 by replacing all occurrences of `%s` with `%1023s` in all calls of the `fscanf()` and `scanf()` functions.

OpenPrinting CUPS is an open source printing system. In versions 2.4.2 and prior, a heap buffer overflow vulnerability would allow a remote attacker to launch a denial of service (DoS) attack. A buffer overflow vulnerability in the function `format_log_line` could allow remote attackers to cause a DoS on the affected system. Exploitation of the vulnerability can be triggered when the configuration file `cupsd.conf` sets the value of `loglevel `to `DEBUG`. No known patches or workarounds exist at time of publication.

OpenPrinting CUPS is an open source printing system for Linux and other Unix-like operating systems. In versions 2.4.16 and prior, there is a heap-based buffer overflow in the CUPS scheduler when building filter option strings from job attribute. At time of publication, there are no publicly available patches.

cups-filters contains backends, filters, and other software required to get the cups printing service working on operating systems other than macos. In cups-filters prior to 1.28.18, by crafting a PDF file with a large `MediaBox` value, an attacker can cause CUPS-Filter 1.x’s `pdftoraster` tool to write beyond the bounds of an array. First, a PDF with a large `MediaBox` width value causes `header.cupsWidth` to become large. Next, the calculation of `bytesPerLine = (header.cupsBitsPerPixel * header.cupsWidth + 7) / 8` overflows, resulting in a small value. Then, `lineBuf` is allocated with the small `bytesPerLine` size. Finally, `convertLineChunked` calls `writePixel8`, which attempts to write to `lineBuf` outside of its buffer size (out of bounds write). In libcupsfilters, the maintainers found the same `bytesPerLine` multiplication without overflow check, but the provided test case does not cause an overflow there, because the values are different. Commit 50d94ca0f2fa6177613c97c59791bde568631865 contains a patch, which is incorporated into cups-filters version 1.28.18.

CUPS is a standards-based, open-source printing system, and `libcupsfilters` contains the code of the filters of the former `cups-filters` package as library functions to be used for the data format conversion tasks needed in Printer Applications. In CUPS-Filters versions up to and including 1.28.17 and libscupsfilters versions 2.0.0 through 2.1.1, CUPS-Filters's `imagetoraster` filter has an out of bounds read/write vulnerability in the processing of TIFF image files. While the pixel buffer is allocated with the number of pixels times a pre-calculated bytes-per-pixel value, the function which processes these pixels is called with a size of the number of pixels times 3. When suitable inputs are passed, the bytes-per-pixel value can be set to 1 and bytes outside of the buffer bounds get processed. In order to trigger the bug, an attacker must issue a print job with a crafted TIFF file, and pass appropriate print job options to control the bytes-per-pixel value of the output format. They must choose a printer configuration under which the `imagetoraster` filter or its C-function equivalent `cfFilterImageToRaster()` gets invoked. The vulnerability exists in both CUPS-Filters 1.x and the successor library libcupsfilters (CUPS-Filters 2.x). In CUPS-Filters 2.x, the vulnerable function is `_cfImageReadTIFF() in libcupsfilters`. When this function is invoked as part of `cfFilterImageToRaster()`, the caller passes a look-up-table during whose processing the out of bounds memory access happens. In CUPS-Filters 1.x, the equivalent functions are all found in the cups-filters repository, which is not split into subprojects yet, and the vulnerable code is in `_cupsImageReadTIFF()`, which is called through `cupsImageOpen()` from the `imagetoraster` tool. A patch is available in commit b69dfacec7f176281782e2f7ac44f04bf9633cfa.

in OpenHarmony v5.0.2 and prior versions allow a local attacker cause DOS through out-of-bounds write.

A flaw has been found in OSGeo gdal up to 3.13.0dev-4. Affected by this vulnerability is the function SWSDfldsrch of the file frmts/hdf4/hdf-eos/SWapi.c. Executing a manipulation can lead to heap-based buffer overflow. The attack requires local access. The exploit has been published and may be used. Upgrading to version 3.13.0RC1 addresses this issue. This patch is called 3e04c0385630e4d42517046d9a4967dfccfeb7fd. The affected component should be upgraded.

A vulnerability has been found in OSGeo gdal up to 3.13.0dev-4. Affected by this issue is the function GDSDfldsrch of the file frmts/hdf4/hdf-eos/GDapi.c of the component Grid File Handler. The manipulation leads to heap-based buffer overflow. An attack has to be approached locally. The exploit has been disclosed to the public and may be used. Upgrading to version 3.13.0RC1 can resolve this issue. The identifier of the patch is 3e04c0385630e4d42517046d9a4967dfccfeb7fd. It is suggested to upgrade the affected component.

The Oberthur smart card software driver in OpenSC before 0.21.0-rc1 has a heap-based buffer overflow in sc_oberthur_read_file.

The gemsafe GPK smart card software driver in OpenSC before 0.21.0-rc1 has a stack-based buffer overflow in sc_pkcs15emu_gemsafeGPK_init.

In the Linux kernel, the following vulnerability has been resolved: gtp: Suppress list corruption splat in gtp_net_exit_batch_rtnl(). Brad Spengler reported the list_del() corruption splat in gtp_net_exit_batch_rtnl(). [0] Commit eb28fd76c0a0 ("gtp: Destroy device along with udp socket's netns dismantle.") added the for_each_netdev() loop in gtp_net_exit_batch_rtnl() to destroy devices in each netns as done in geneve and ip tunnels. However, this could trigger ->dellink() twice for the same device during ->exit_batch_rtnl(). Say we have two netns A & B and gtp device B that resides in netns B but whose UDP socket is in netns A. 1. cleanup_net() processes netns A and then B. 2. gtp_net_exit_batch_rtnl() finds the device B while iterating netns A's gn->gtp_dev_list and calls ->dellink(). [ device B is not yet unlinked from netns B as unregister_netdevice_many() has not been called. ] 3. gtp_net_exit_batch_rtnl() finds the device B while iterating netns B's for_each_netdev() and calls ->dellink(). gtp_dellink() cleans up the device's hash table, unlinks the dev from gn->gtp_dev_list, and calls unregister_netdevice_queue(). Basically, calling gtp_dellink() multiple times is fine unless CONFIG_DEBUG_LIST is enabled. Let's remove for_each_netdev() in gtp_net_exit_batch_rtnl() and delegate the destruction to default_device_exit_batch() as done in bareudp. [0]: list_del corruption, ffff8880aaa62c00->next (autoslab_size_M_dev_P_net_core_dev_11127_8_1328_8_S_4096_A_64_n_139+0xc00/0x1000 [slab object]) is LIST_POISON1 (ffffffffffffff02) (prev is 0xffffffffffffff04) kernel BUG at lib/list_debug.c:58! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 1 UID: 0 PID: 1804 Comm: kworker/u8:7 Tainted: G T 6.12.13-grsec-full-20250211091339 #1 Tainted: [T]=RANDSTRUCT Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Workqueue: netns cleanup_net RIP: 0010:[<ffffffff84947381>] __list_del_entry_valid_or_report+0x141/0x200 lib/list_debug.c:58 Code: c2 76 91 31 c0 e8 9f b1 f7 fc 0f 0b 4d 89 f0 48 c7 c1 02 ff ff ff 48 89 ea 48 89 ee 48 c7 c7 e0 c2 76 91 31 c0 e8 7f b1 f7 fc <0f> 0b 4d 89 e8 48 c7 c1 04 ff ff ff 48 89 ea 48 89 ee 48 c7 c7 60 RSP: 0018:fffffe8040b4fbd0 EFLAGS: 00010283 RAX: 00000000000000cc RBX: dffffc0000000000 RCX: ffffffff818c4054 RDX: ffffffff84947381 RSI: ffffffff818d1512 RDI: 0000000000000000 RBP: ffff8880aaa62c00 R08: 0000000000000001 R09: fffffbd008169f32 R10: fffffe8040b4f997 R11: 0000000000000001 R12: a1988d84f24943e4 R13: ffffffffffffff02 R14: ffffffffffffff04 R15: ffff8880aaa62c08 RBX: kasan shadow of 0x0 RCX: __wake_up_klogd.part.0+0x74/0xe0 kernel/printk/printk.c:4554 RDX: __list_del_entry_valid_or_report+0x141/0x200 lib/list_debug.c:58 RSI: vprintk+0x72/0x100 kernel/printk/printk_safe.c:71 RBP: autoslab_size_M_dev_P_net_core_dev_11127_8_1328_8_S_4096_A_64_n_139+0xc00/0x1000 [slab object] RSP: process kstack fffffe8040b4fbd0+0x7bd0/0x8000 [kworker/u8:7+netns 1804 ] R09: kasan shadow of process kstack fffffe8040b4f990+0x7990/0x8000 [kworker/u8:7+netns 1804 ] R10: process kstack fffffe8040b4f997+0x7997/0x8000 [kworker/u8:7+netns 1804 ] R15: autoslab_size_M_dev_P_net_core_dev_11127_8_1328_8_S_4096_A_64_n_139+0xc08/0x1000 [slab object] FS: 0000000000000000(0000) GS:ffff888116000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000748f5372c000 CR3: 0000000015408000 CR4: 00000000003406f0 shadow CR4: 00000000003406f0 Stack: 0000000000000000 ffffffff8a0c35e7 ffffffff8a0c3603 ffff8880aaa62c00 ffff8880aaa62c00 0000000000000004 ffff88811145311c 0000000000000005 0000000000000001 ffff8880aaa62000 fffffe8040b4fd40 ffffffff8a0c360d Call Trace: <TASK> [<ffffffff8a0c360d>] __list_del_entry_valid include/linux/list.h:131 [inline] fffffe8040b4fc28 [<ffffffff8a0c360d>] __list_del_entry include/linux/list.h:248 [inline] fffffe8040b4fc28 [<ffffffff8a0c360d>] list_del include/linux/list.h:262 [inl ---truncated---

Out-of-bounds write in libsavscmn prior to Android 15 allows local attackers to cause memory corruption.

Out-of-bounds write in accessing uninitialized memory in libsavsvc.so prior to Android 15 allows local attackers to cause memory corruption.

Kernel subsystem within OpenHarmony-v3.1.4 and prior versions in kernel_liteos_a has a kernel stack overflow vulnerability when call SysClockGetres. 4 bytes padding data from kernel stack are copied to user space incorrectly and leaked.

In wlan driver, there is a possible missing params check. This could lead to local denial of service in wlan services.

A security vulnerability has been detected in Mapnik up to 4.2.0. This issue affects the function mapnik::dbf_file::string_value of the file plugins/input/shape/dbfile.cpp. Such manipulation leads to heap-based buffer overflow. The attack must be carried out locally. The exploit has been disclosed publicly and may be used. The project was informed of the problem early through an issue report but has not responded yet.

A weakness has been identified in BYVoid OpenCC up to 1.1.9. This vulnerability affects the function opencc::MaxMatchSegmentation of the file src/MaxMatchSegmentation.cpp. This manipulation causes heap-based buffer overflow. The attack is restricted to local execution. The exploit has been made available to the public and could be used for attacks. Patch name: 345c9a50ab07018f1b4439776bad78a0d40778ec. To fix this issue, it is recommended to deploy a patch.

In the Linux kernel, the following vulnerability has been resolved: nouveau/uvmm: fix addr/range calcs for remap operations dEQP-VK.sparse_resources.image_rebind.2d_array.r64i.128_128_8 was causing a remap operation like the below. op_remap: prev: 0000003fffed0000 00000000000f0000 00000000a5abd18a 0000000000000000 op_remap: next: op_remap: unmap: 0000003fffed0000 0000000000100000 0 op_map: map: 0000003ffffc0000 0000000000010000 000000005b1ba33c 00000000000e0000 This was resulting in an unmap operation from 0x3fffed0000+0xf0000, 0x100000 which was corrupting the pagetables and oopsing the kernel. Fixes the prev + unmap range calcs to use start/end and map back to addr/range.

In face detect driver, there is a possible out of bounds write due to a missing bounds check. This could lead to local denial of service in kernel.

In sensor driver, there is a possible out of bounds write due to a missing bounds check. This could lead to local denial of service in kernel.

In sensor driver, there is a possible out of bounds write due to a missing bounds check. This could lead to local denial of service in kernel.

In sensor driver, there is a possible out of bounds write due to a missing bounds check. This could lead to local denial of service in kernel.

In sensor driver, there is a possible out of bounds write due to a missing bounds check. This could lead to local denial of service in kernel.

In sprd_sysdump driver, there is a possible out of bounds write due to a missing bounds check. This could lead to local denial of service in kernel.

In camera driver, there is a possible out of bounds write due to a missing bounds check. This could lead to local denial of service in kernel.

In sensor driver, there is a possible out of bounds write due to a missing bounds check. This could lead to local denial of service in kernel.

A vulnerability, which was classified as problematic, has been found in code-projects Police FIR Record Management System 1.0. This issue affects some unknown processing of the component Add Record Handler. The manipulation leads to stack-based buffer overflow. Local access is required to approach this attack. The exploit has been disclosed to the public and may be used.

A vulnerability was determined in GNU Binutils 2.45. The affected element is the function elf_x86_64_relocate_section of the file elf64-x86-64.c of the component Linker. This manipulation causes heap-based buffer overflow. The attack can only be executed locally. The exploit has been publicly disclosed and may be utilized. Patch name: 6b21c8b2ecfef5c95142cbc2c32f185cb1c26ab0. To fix this issue, it is recommended to deploy a patch.

In gpu driver, there is a possible out of bounds write due to a missing bounds check. This could lead to local denial of service in kernel.

In face detect driver, there is a possible out of bounds write due to a missing bounds check. This could lead to local denial of service in kernel.

Tenda AX12 V22.03.01.21_CN is vulnerable to Buffer Overflow. This overflow is triggered in the sub_42FDE4 function, which satisfies the request of the upper-level interface function sub_430124, that is, handles the post request under /goform/SetIpMacBind.

Tenda AC9 V15.03.2.13 is vulnerable to Buffer Overflow via httpd, form_fast_setting_wifi_set. httpd.

An out-of-bounds(OOB) memory access vulnerability was found in vmwgfx driver in drivers/gpu/vmxgfx/vmxgfx_kms.c in GPU component in the Linux kernel with device file '/dev/dri/renderD128 (or Dxxx)'. This flaw allows a local attacker with a user account on the system to gain privilege, causing a denial of service(DoS).

Memory corruption while processing IOCTL command when device is in power-save state.

The NHI card’s web service component has a heap-based buffer overflow vulnerability due to insufficient validation for packet origin parameter length. A LAN attacker with general user privilege can exploit this vulnerability to disrupt service.

A security flaw has been discovered in Squirrel up to 3.2. This affects the function SQObjectPtr::operator in the library squirrel/sqobject.h. The manipulation results in heap-based buffer overflow. The attack needs to be approached locally. The exploit has been released to the public and may be used for attacks. The project was informed of the problem early through an issue report but has not responded yet.

In the Linux kernel, the following vulnerability has been resolved: vmxnet3: Fix packet corruption in vmxnet3_xdp_xmit_frame Andrew and Nikolay reported connectivity issues with Cilium's service load-balancing in case of vmxnet3. If a BPF program for native XDP adds an encapsulation header such as IPIP and transmits the packet out the same interface, then in case of vmxnet3 a corrupted packet is being sent and subsequently dropped on the path. vmxnet3_xdp_xmit_frame() which is called e.g. via vmxnet3_run_xdp() through vmxnet3_xdp_xmit_back() calculates an incorrect DMA address: page = virt_to_page(xdpf->data); tbi->dma_addr = page_pool_get_dma_addr(page) + VMXNET3_XDP_HEADROOM; dma_sync_single_for_device(&adapter->pdev->dev, tbi->dma_addr, buf_size, DMA_TO_DEVICE); The above assumes a fixed offset (VMXNET3_XDP_HEADROOM), but the XDP BPF program could have moved xdp->data. While the passed buf_size is correct (xdpf->len), the dma_addr needs to have a dynamic offset which can be calculated as xdpf->data - (void *)xdpf, that is, xdp->data - xdp->data_hard_start.

GnuPG can be made to spin on a relatively small input by (for example) crafting a public key with thousands of signatures attached, compressed down to just a few KB.

In jpg driver, there is a possible out of bounds write due to a missing bounds check. This could lead to local denial of service in kernel.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_h323: Add protection for bmp length out of range UBSAN load reports an exception of BRK#5515 SHIFT_ISSUE:Bitwise shifts that are out of bounds for their data type. vmlinux get_bitmap(b=75) + 712 <net/netfilter/nf_conntrack_h323_asn1.c:0> vmlinux decode_seq(bs=0xFFFFFFD008037000, f=0xFFFFFFD008037018, level=134443100) + 1956 <net/netfilter/nf_conntrack_h323_asn1.c:592> vmlinux decode_choice(base=0xFFFFFFD0080370F0, level=23843636) + 1216 <net/netfilter/nf_conntrack_h323_asn1.c:814> vmlinux decode_seq(f=0xFFFFFFD0080371A8, level=134443500) + 812 <net/netfilter/nf_conntrack_h323_asn1.c:576> vmlinux decode_choice(base=0xFFFFFFD008037280, level=0) + 1216 <net/netfilter/nf_conntrack_h323_asn1.c:814> vmlinux DecodeRasMessage() + 304 <net/netfilter/nf_conntrack_h323_asn1.c:833> vmlinux ras_help() + 684 <net/netfilter/nf_conntrack_h323_main.c:1728> vmlinux nf_confirm() + 188 <net/netfilter/nf_conntrack_proto.c:137> Due to abnormal data in skb->data, the extension bitmap length exceeds 32 when decoding ras message then uses the length to make a shift operation. It will change into negative after several loop. UBSAN load could detect a negative shift as an undefined behaviour and reports exception. So we add the protection to avoid the length exceeding 32. Or else it will return out of range error and stop decoding.

TensorFlow is an open source platform for machine learning. In version 2.8.0, the `TensorKey` hash function used total estimated `AllocatedBytes()`, which (a) is an estimate per tensor, and (b) is a very poor hash function for constants (e.g. `int32_t`). It also tried to access individual tensor bytes through `tensor.data()` of size `AllocatedBytes()`. This led to ASAN failures because the `AllocatedBytes()` is an estimate of total bytes allocated by a tensor, including any pointed-to constructs (e.g. strings), and does not refer to contiguous bytes in the `.data()` buffer. The discoverers could not use this byte vector anyway because types such as `tstring` include pointers, whereas they needed to hash the string values themselves. This issue is patched in Tensorflow versions 2.9.0 and 2.8.1.

In the Linux kernel, the following vulnerability has been resolved: media: vivid: fix buffer overwrite when using > 32 buffers The maximum number of buffers that can be requested was increased to 64 for the video capture queue. But video capture used a must_blank array that was still sized for 32 (VIDEO_MAX_FRAME). This caused an out-of-bounds write when using buffer indices >= 32. Create a new define MAX_VID_CAP_BUFFERS that is used to access the must_blank array and set max_num_buffers for the video capture queue. This solves a crash reported by: https://bugzilla.kernel.org/show_bug.cgi?id=219258

Out-of-bounds array write in Xpdf 4.05 and earlier, due to missing object type check in AcroForm field reference.

An issue in radare2 v5.8.0 through v5.9.4 allows a local attacker to cause a denial of service via the __bf_div function.

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: use hweight16 to get correct tx antenna The chainmask is u16 so using hweight8 cannot get correct tx_ant. Without this patch, the tx_ant of band 2 would be -1 and lead to the following issue: BUG: KASAN: stack-out-of-bounds in mt7996_mcu_add_sta+0x12e0/0x16e0 [mt7996e]

The Linux kernel was found vulnerable out of bounds memory access in the drivers/video/fbdev/sm712fb.c:smtcfb_read() function. The vulnerability could result in local attackers being able to crash the kernel.

A vulnerability was found in Performance Co-Pilot (PCP).  This flaw allows an attacker to send specially crafted data to the system, which could cause the program to misbehave or crash.

In the Linux kernel, the following vulnerability has been resolved: erofs: fix out-of-bound access when z_erofs_gbuf_growsize() partially fails If z_erofs_gbuf_growsize() partially fails on a global buffer due to memory allocation failure or fault injection (as reported by syzbot [1]), new pages need to be freed by comparing to the existing pages to avoid memory leaks. However, the old gbuf->pages[] array may not be large enough, which can lead to null-ptr-deref or out-of-bound access. Fix this by checking against gbuf->nrpages in advance. [1] https://lore.kernel.org/r/000000000000f7b96e062018c6e3@google.com