In Total Defense Anti-virus 9.0.0.773, insecure access control for the directory %PROGRAMDATA%\TotalDefense\Consumer\ISS\9\bd\TDUpdate2\ used by AMRT.exe allows local attackers to hijack bdcore.dll, which leads to privilege escalation when the AMRT service loads the DLL.

drbd8 allows local users to bypass intended restrictions for certain actions via netlink packets, similar to CVE-2009-3725.

This vulnerability allows local attackers to escalate privileges on affected installations of Foxit Reader 10.0.0.35798. An attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability. The specific flaw exists within the handling of the configuration files used by the Foxit Reader Update Service. The issue results from incorrect permissions set on a resource used by the service. An attacker can leverage this vulnerability to escalate privileges and execute code in the context of SYSTEM. Was ZDI-CAN-11229.

In setNiNotification of GpsNetInitiatedHandler.java, there is a possible permissions bypass due to an empty mutable PendingIntent. This could lead to local escalation of privilege with User execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-10 Android-8.1 Android-9Android ID: A-154319182

Nagios NDOUtils before 2.1.4 allows privilege escalation from nagios to root because certain executable files are owned by the nagios user.

A vulnerability in Cisco Jabber Client Framework (JCF) for Mac Software, installed as part of the Cisco Jabber for Mac client, could allow an authenticated, local attacker to execute arbitrary code on an affected device The vulnerability is due to improper file level permissions on an affected device when it is running Cisco JCF for Mac Software. An attacker could exploit this vulnerability by authenticating to the affected device and executing arbitrary code or potentially modifying certain configuration files. A successful exploit could allow the attacker to execute arbitrary code or modify certain configuration files on the device using the privileges of the installed Cisco JCF for Mac Software.

A “CWE-732: Incorrect Permission Assignment for Critical Resource” in the ThermoscanIP installation folder allows a local attacker to perform a Local Privilege Escalation.

Improper file permissions in the installer for the Intel(R) Media SDK for Windows before version 2019 R1 may allow an authenticated user to potentially enable escalation of privilege via local access.

The g_file_copy function in glib 2.0 sets the permissions of a target file to the permissions of a symbolic link (777), which allows user-assisted local users to modify files of other users, as demonstrated by using Nautilus to modify the permissions of the user home directory.

Adobe Photoshop Elements 8.0 installs the Adobe Active File Monitor V8 service with an insecure security descriptor, which allows local users to (1) stop the service via the stop command, (2) execute arbitrary commands as SYSTEM by using the config command to modify the binPath variable, or (3) restart the service via the start command.

FOG is a cloning/imaging/rescue suite/inventory management system. The application stores plaintext service account credentials in the "/opt/fog/.fogsettings" file. This file is by default readable by all users on the host. By exploiting these credentials, a malicious user could create new accounts for the web application and much more. The vulnerability is fixed in 1.5.10.41.

Incorrect file permissions in Ivanti Connect Secure before version 22.6R2 (Not Applicable to 9.1Rx) and Ivanti Policy Secure before version 22.7R1 (Not Applicable to 9.1Rx) allow a local authenticated attacker to escalate their privileges.

Insecure inherited permissions for some Intel(R) DSA software before version 24.3.26.8 may allow an authenticated user to potentially enable escalation of privilege via local access.

NextVPN 4.10 contains an insecure file permissions vulnerability that allows local users to modify executable files with full access rights. Attackers can replace system executables with malicious files to gain SYSTEM or Administrator privileges through unauthorized file modification.

NMIS/BioDose V22.02 and previous versions' installation directory paths by default have insecure file permissions, which in certain deployment scenarios can enable users on client workstations to modify the program executables and libraries.

GSTN_offline_tool in India Goods and Services Tax Network (GSTN) Offline Utility tool before 1.2 executes winstart-server.vbs from the "C:\GST Offline Tool" directory, which has insecure permissions. This allows local users to gain privileges by replacing winstart-server.vbs with arbitrary VBScript code. For example, a local user could create VBScript code for a TCP reverse shell, and use that later for Remote Command Execution.

iMonitor EAM 9.6394 installs a system service (eamusbsrv64.exe) that runs with NT AUTHORITY\SYSTEM privileges. This service includes an insecure update mechanism that automatically loads files placed in the C:\sysupdate\ directory during startup. Because any local user can create and write to this directory, an attacker can place malicious DLLs or executables in it. Upon service restart, the files are moved to the application’s installation path and executed with SYSTEM privileges, leading to privilege escalation.

The svpn and policyserver components of the F5 BIG-IP APM client prior to version 7.1.7.1 for Linux and macOS runs as a privileged process and can allow an unprivileged user to get ownership of files owned by root on the local client host. A malicious local unprivileged user may gain knowledge of sensitive information, manipulate certain data, or assume super-user privileges on the local client host.

An issue was discovered in Ricoh (including Savin and Lanier) Windows printer drivers prior to 2020 that allows attackers local privilege escalation. Affected drivers and versions are: PCL6 Driver for Universal Print - Version 4.0 or later PS Driver for Universal Print - Version 4.0 or later PC FAX Generic Driver - All versions Generic PCL5 Driver - All versions RPCS Driver - All versions PostScript3 Driver - All versions PCL6 (PCL XL) Driver - All versions RPCS Raster Driver - All version

A vulnerability has been identified in Spectrum Power 4 (All versions < V4.70 SP12 Update 2). The affected application is vulnerable to extraction of database credentials via a world-readable credential file. This allows an attacker to connect to the database as privileged application user and to run system commands via the database.

An exploitable local privilege escalation vulnerability exists in the privileged helper tool of GOG Galaxy's Games, version 1.2.47 for macOS. An attacker can globally adjust folder permissions leading to execution of arbitrary code with elevated privileges.

Max Secure Anti Virus Plus 19.0.4.020 has Insecure Permissions on the installation directory. Local attackers can replace a .exe or .dll file to achieve privilege escalation.

An exploitable local privilege elevation vulnerability exists in the file system permissions of GOG Galaxy's install directory. An attacker can overwrite an executable that is launched as a system service on boot by default to exploit this vulnerability and execute arbitrary code with system privileges.

A10 Thunder ADC Incorrect Permission Assignment Local Privilege Escalation Vulnerability. This vulnerability allows local attackers to escalate privileges on affected installations of A10 Thunder ADC. An attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability. The specific flaw exists within the installer. The issue results from incorrect permissions on a file. An attacker can leverage this vulnerability to escalate privileges and execute arbitrary code in the context of root. Was ZDI-CAN-22754.

dp-golang is a Puppet module for Go installations. Prior to 1.2.7, dp-golang could install files — including the compiler binary — with the wrong ownership when Puppet was run as root and the installed package was On macOS: Go version 1.4.3 through 1.21rc3, inclusive, go1.4-bootstrap-20170518.tar.gz, or go1.4-bootstrap-20170531.tar.gz. The user and group specified in Puppet code were ignored for files within the archive. dp-puppet version 1.2.7 will recreate installations if the owner or group of any file or directory within that installation does not match the requested owner or group

'Long-term Data Archive Package' service implemented in the following Yokogawa Electric products creates some named pipe with imporper ACL configuration. CENTUM CS 3000 versions from R3.08.10 to R3.09.00, CENTUM VP versions from R4.01.00 to R4.03.00, from R5.01.00 to R5.04.20, and from R6.01.00 to R6.08.00, Exaopc versions from R3.72.00 to R3.79.00.

Windows Secure Kernel Mode Elevation of Privilege Vulnerability

Insecure inherited permissions in some Intel(R) HID Event Filter software installers before version 2.2.2.1 may allow an authenticated user to potentially enable escalation of privilege via local access.

An issue was discovered in Mullvad VPN Windows app before 2023.6-beta1. Insufficient permissions on a directory allow any local unprivileged user to escalate privileges to SYSTEM.

Insecure inherited permissions in some Flexlm License Daemons for Intel(R) FPGA software before version v11.19.5.0 may allow an authenticated user to potentially enable escalation of privilege via local access.

Use of improper permission in InputManagerService prior to SMR Jul-2022 Release 1 allows unauthorized access to the service.

A vulnerability was found in McKesson Cardiology product 13.x and 14.x. Insecure file permissions in the default installation may allow an attacker with local system access to execute unauthorized arbitrary code.

IBM Security Guardium 11.3, 11.4, 11.5, and 12.0 could allow a local user to gain elevated privileges on the system due to improper permissions control. IBM X-Force ID: 271527.

Insecure inherited permissions in the Intel(R) oneAPI Toolkits oneapi-cli before version 0.2.0 may allow an authenticated user to potentially enable escalation of privilege via local access.

Synaman v5.1 and below was discovered to contain weak file permissions which allows authenticated attackers to escalate privileges.

HIGH-LEIT V05.08.01.03 and HIGH-LEIT V04.25.00.00 to 4.25.01.01 for Windows from Vivavis contain an insecure file and folder permissions vulnerability in prunsrv.exe. A regular user (non-admin) can exploit the weak folder and file permissions to escalate privileges and execute arbitrary code in the context of NT AUTHORITY\SYSTEM.

Check Point ZoneAlarm before version 15.8.200.19118 allows a local actor to escalate privileges during the upgrade process. In addition, weak permissions in the ProgramData\CheckPoint\ZoneAlarm\Data\Updates directory allow a local attacker the ability to execute an arbitrary file write, leading to execution of code as local system, in ZoneAlarm versions before v15.8.211.192119

Insecure inherited permissions for some Intel(R) CIP software before version 2.4.10852 may allow an authenticated user to potentially enable escalation of privilege via local access.

The SysDrv3S driver in the CODESYS Control runtime system on Microsoft Windows allows any system user to read and write within restricted memory space.

VMware Workspace ONE Access, Identity Manager and vRealize Automation contain a privilege escalation vulnerability due to improper permissions in support scripts. A malicious actor with local access can escalate privileges to 'root'.

A local unprivileged attacker may escalate to administrator privileges in Honeywell SoftMaster version 4.51, due to insecure permission assignment.

IBM Tivoli Workload Automation for AIX (IBM Workload Scheduler 8.6, 9.1, 9.2, 9.3, and 9.4) contains directories with improper permissions that could allow a local user to with special access to gain root privileges. IBM X-Force ID: 138208.

'Root Service' service implemented in the following Yokogawa Electric products creates some named pipe with improper ACL configuration. CENTUM CS 3000 versions from R3.08.10 to R3.09.00, CENTUM VP versions from R4.01.00 to R4.03.00, from R5.01.00 to R5.04.20, and from R6.01.00 to R6.08.00, Exaopc versions from R3.72.00 to R3.79.00.

In addOrUpdateNetwork of WifiServiceImpl.java, there is a possible way for a guest user to configure Wi-Fi due to a permissions bypass. This could lead to local escalation of privilege with User execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-13Android ID: A-221859734

Incorrect Permission Assignment for Critical Resource in GitHub repository zerotier/zerotierone prior to 1.8.8. Local Privilege Escalation

A local privilege escalation vulnerability caused by incorrect permission assignment in some directories of the Zyxel AP Configurator (ZAC) version 1.1.4, which could allow an attacker to execute arbitrary code as a local administrator.

Confd log files contain local users', including root’s, SHA512crypt password hashes with insecure access permissions. This allows a local attacker to attempt off-line brute-force attacks against these password hashes in Sophos UTM before version 9.710.

Local privilege escalation due to insecure folder permissions. The following products are affected: Acronis VSS Doctor (Windows) before build 53

In Sage 300 ERP (formerly accpac) through 6.8.x, the installer configures the C:\Sage\Sage300\Runtime directory to be the first entry in the system-wide PATH environment variable. However, this directory is writable by unprivileged users because the Sage installer fails to set explicit permissions and therefore inherits weak permissions from the C:\ folder. Because entries in the system-wide PATH variable are included in the search order for DLLs, an attacker could perform DLL search-order hijacking to escalate their privileges to SYSTEM. Furthermore, if the Global Search or Web Screens functionality is enabled, then privilege escalation is possible via the GlobalSearchService and Sage.CNA.WindowsService services, again via DLL search-order hijacking because unprivileged users would have modify permissions on the application directory. Note that while older versions of the software default to installing in %PROGRAMFILES(X86)% (which would allow the Sage folder to inherit strong permissions, making the installation not vulnerable), the official Sage 300 installation guides for those versions recommend installing in C:\Sage, which would make the installation vulnerable.

Hypervisor-Protected Code Integrity (HVCI) Security Feature Bypass Vulnerability