LIBPNG is a reference library for use in applications that read, create, and manipulate PNG (Portable Network Graphics) raster image files. Prior to 1.6.52, an out-of-bounds read vulnerability in libpng's simplified API allows reading up to 1012 bytes beyond the png_sRGB_base[512] array when processing valid palette PNG images with partial transparency and gamma correction. The PNG files that trigger this vulnerability are valid per the PNG specification; the bug is in libpng's internal state management. Upgrade to libpng 1.6.52 or later.

The Portable Network Graphics library (libpng) 1.0.15 and earlier allows attackers to cause a denial of service (crash) via a malformed PNG image file that triggers an error that causes an out-of-bounds read when creating the error message.

A flaw was found in the check_chunk_name() function of pngcheck-2.4.0. An attacker able to pass a malicious file to be processed by pngcheck could cause a temporary denial of service, posing a low risk to application availability.

The png_format_buffer function in pngerror.c in libpng 1.0.x before 1.0.55, 1.2.x before 1.2.45, 1.4.x before 1.4.8, and 1.5.x before 1.5.4 allows remote attackers to cause a denial of service (application crash) via a crafted PNG image that triggers an out-of-bounds read during the copying of error-message data. NOTE: this vulnerability exists because of a CVE-2004-0421 regression. NOTE: this is called an off-by-one error by some sources.

LIBPNG is a reference library for use in applications that read, create, and manipulate PNG (Portable Network Graphics) raster image files. In versions 1.6.36 through 1.6.55, an out-of-bounds read and write exists in libpng's ARM/AArch64 Neon-optimized palette expansion path. When expanding 8-bit paletted rows to RGB or RGBA, the Neon loop processes a final partial chunk without verifying that enough input pixels remain. Because the implementation works backward from the end of the row, the final iteration dereferences pointers before the start of the row buffer (OOB read) and writes expanded pixel data to the same underflowed positions (OOB write). This is reachable via normal decoding of attacker-controlled PNG input if Neon is enabled. Version 1.6.56 fixes the issue.

LIBPNG is a reference library for use in applications that read, create, and manipulate PNG (Portable Network Graphics) raster image files. Prior to 1.6.55, an out-of-bounds read vulnerability exists in the png_set_quantize() API function. When the function is called with no histogram and the number of colors in the palette is more than twice the maximum supported by the user's display, certain palettes will cause the function to enter into an infinite loop that reads past the end of an internal heap-allocated buffer. The images that trigger this vulnerability are valid per the PNG specification. This vulnerability is fixed in 1.6.55.

LIBPNG is a reference library for use in applications that read, create, and manipulate PNG (Portable Network Graphics) raster image files. From 1.6.51 to 1.6.53, there is a heap buffer over-read in the libpng simplified API function png_image_finish_read when processing interlaced 16-bit PNGs with 8-bit output format and non-minimal row stride. This is a regression introduced by the fix for CVE-2025-65018. This vulnerability is fixed in 1.6.54.

LIBPNG is a reference library for use in applications that read, create, and manipulate PNG (Portable Network Graphics) raster image files. From 1.6.26 to 1.6.53, there is an integer truncation in the libpng simplified write API functions png_write_image_16bit and png_write_image_8bit causes heap buffer over-read when the caller provides a negative row stride (for bottom-up image layouts) or a stride exceeding 65535 bytes. The bug was introduced in libpng 1.6.26 (October 2016) by casts added to silence compiler warnings on 16-bit systems. This vulnerability is fixed in 1.6.54.

LIBPNG is a reference library for use in applications that read, create, and manipulate PNG (Portable Network Graphics) raster image files. Prior to version 1.6.51, a heap buffer over-read vulnerability exists in libpng's png_do_quantize function when processing PNG files with malformed palette indices. The vulnerability occurs when palette_lookup array bounds are not validated against externally-supplied image data, allowing an attacker to craft a PNG file with out-of-range palette indices that trigger out-of-bounds memory access. This issue has been patched in version 1.6.51.

LIBPNG is a reference library for use in applications that read, create, and manipulate PNG (Portable Network Graphics) raster image files. From version 1.6.0 to before 1.6.51, a heap buffer over-read vulnerability exists in libpng's png_write_image_8bit function when processing 8-bit images through the simplified write API with convert_to_8bit enabled. The vulnerability affects 8-bit grayscale+alpha, RGB/RGBA, and images with incomplete row data. A conditional guard incorrectly allows 8-bit input to enter code expecting 16-bit input, causing reads up to 2 bytes beyond allocated buffer boundaries. This issue has been patched in version 1.6.51.

A heap-buffer-overflow read vulnerability was found in libaom, the reference AV1 codec implementation. A missing bounds check in the SVC (Scalable Video Coding) layer ID control function allows setting a spatial_layer_id exceeding the configured number of layers. This causes an out-of-bounds heap read of approximately 40,728 bytes when computing a layer context array index. An attacker who can influence SVC encoder parameters in a network-facing service could exploit this for information disclosure (heap content leak) or denial of service (segmentation fault from hitting unmapped memory).

A flaw was found in GStreamer's RealMedia demuxer in the gst-plugins-ugly package. When processing a RealMedia file containing a specially crafted FILEINFO metadata section, the demuxer parses variable-name and variable-value pairs using re_skip_pascal_string() without validating that offsets remain within the mapped buffer. Additionally, the element count controlling the parsing loop is read from attacker-controlled data without validation, which can cause an infinite loop. A crafted RealMedia file can cause the application to crash, hang, or potentially read limited adjacent memory contents.

7-Zip is a file archiver with a high compression ratio. Versions 9.34 through 26.00 contain an off-by-one heap out-of-bounds read in the WIM (Windows Imaging) archive handler's security descriptor lookup. In CHandler::GetSecurity (CPP/7zip/Archive/Wim/WimHandler.cpp), the per-image SecurOffsets table holds numEntries + 1 cumulative offsets, but the check securityId >= SecurOffsets.Size() admits securityId == numEntries, and the function then reads SecurOffsets[securityId + 1], fetching one UInt32 past the end of the heap-allocated CRecordVector (which performs no bounds checking on operator[]). The securityId is attacker-controlled at offset +0xC of any directory entry in WIM metadata, and the handler is registered for .wim, .swm, .esd, and .ppkg and enabled by default in stock 7z.dll; the OOB triggers zero-click in the GUI because 7zFM.exe's ListView calls GetRawProp(kpidNtSecure) for every item during listing (ASan-confirmed), and is also reachable via CLI listing with 7zz l -slt. Impact is limited to denial of service under hardened allocators and minor information disclosure, since the OOB value is only consumed arithmetically as a length and is not surfaced to the attacker; there is no write primitive.

libheif is a HEIF and AVIF file format decoder and encoder. Versions 1.19.0 through 1.21.2 have a heap OOB read in ImageItem_Grid::decode_grid_tile via irot-induced tile-coordinate underflow. Version 1.22.0 fixes the issue.

FFmpeg versions 0.7.1 through 8.1.2 contain an out-of-bounds read vulnerability in the S/PDIF muxer that allows attackers to access memory beyond buffer boundaries by supplying a crafted DTS stream with a core_size value larger than the actual packet length. Attackers can exploit the missing bounds check in the spdif_header_dts4 function by providing a malicious DTS-HD audio stream during S/PDIF re-muxing to trigger unauthorized memory reads beyond the packet buffer.

7-Zip is a file archiver with a high compression ratio. Versions 9.21 through 26.00 contain an off-by-one out-of-bounds read vulnerability in the ParseDepedencyExpression function of the UEFI firmware image parser(CPP/7zip/Archive/UefiHandler.cpp). The function validates an attacker-controlled opcode byte using > instead of >= against the element count of the 10-entry kExpressionCommands static array, allowing an opcode value of 10 to read one pointer slot (8 bytes on x64) past the end of the array in .rodata. The out-of-bounds value is then dereferenced as a const char * and passed through strlen and memcpy into the archive's Characts property, which may cause either a denial of service (access violation when the adjacent bytes do not form a valid readable pointer) or a minor information disclosure of an adjacent .rdata string literal into archive metadata. The vulnerability is reached automatically during IInArchive::Open() via the call path OpenFv/OpenCapsule → ParseVolume → ParseSections when processing a SECTION_DXE_DEPEX (0x13) or SECTION_PEI_DEPEX (0x1B) section whose first body byte is 0x0A, and the UEFI handler is enabled by default in stock 7z.dll with signature-based detection for both UEFIc and UEFIf formats. The outcome (crash vs. silent leak) is deterministic per build but linker-layout dependent, with no write primitive and no disclosure of heap data, secrets, or ASLR base addresses. Version 26.01 fixes the issue.

A vulnerability was found in the GStreamer RealMedia demuxer (gst-plugins-ugly). When processing a RealMedia (.rm) file, the demuxer parses MDPR (media properties) chunks to configure audio streams. For audio stream header versions 4 and 5, the parser reads fields such as codec type, packet size, sample rate, channel count, and extra codec data length from fixed offsets within the chunk without first checking that the chunk contains enough data. If a malicious file provides an MDPR chunk that is too small to contain a complete audio stream header, the parser reads beyond the end of the buffer. This can cause the application to crash. In some cases, bytes read past the buffer boundary may be incorporated into stream metadata, which could result in limited information disclosure.

An out-of-bounds read vulnerability was found in the VA JPEG decoder in GStreamer's gst-plugins-bad. The JPEG parser reads a segment length value from the bitstream without validating it against available data. A remote attacker could trick a user into opening a specially crafted JPEG file, causing downstream parsing to read beyond the provided input buffer, leading to a crash or potential information disclosure.

When PHP EXIF extension is parsing EXIF information from an image, e.g. via exif_read_data() function, in PHP versions 7.1.x below 7.1.31, 7.2.x below 7.2.21 and 7.3.x below 7.3.8 it is possible to supply it with data what will cause it to read past the allocated buffer. This may lead to information disclosure or crash.

When PHP EXIF extension is parsing EXIF information from an image, e.g. via exif_read_data() function, in PHP versions 7.1.x below 7.1.31, 7.2.x below 7.2.21 and 7.3.x below 7.3.8 it is possible to supply it with data what will cause it to read past the allocated buffer. This may lead to information disclosure or crash.

OpenEXR is the reference implementation and specification for the EXR image format, widely used in the motion picture industry. In versions 3.4.0 through 3.4.11, the HTJ2K (High-Throughput JPEG 2000) decoder, ht_undo_impl() in OpenEXRCore is vulnerable to a heap-buffer-overflow READ. The ht_undo_imp function copies decoded pixels out of a per-line OpenJPH buffer using the EXR channel's declared width as the iteration count. The codestream embedded in the EXR chunk can declare different (smaller) tile/line dimensions than the EXR header advertises, but ht_undo_impl() does not validate this — it pulls width 32-bit samples from cur_line->i32[] without checking the OpenJPH line buffer's actual length. A crafted EXR file produces a 4-byte heap-buffer-overflow READ immediately after a buffer allocated by ojph::local::codestream::finalize_alloc(). The bug is reachable through the standard scanline-decode entry point used by every consumer of exr_decoding_run/Imf::checkOpenEXRFile, including thumbnailers, asset pipelines, and the exrcheck utility — i.e. any application that opens untrusted EXR files. The result is a deterministic crash (DoS) and potential adjacent-heap leak. This issue has been fixed in version 3.4.12.

libheif is a HEIF and AVIF file format decoder and encoder. Versions 1.21.2 and prior contain a heap buffer over-read in HeifPixelImage::overlay() in libheif/pixelimage.cc. When compositing an overlay image (iovl) whose child image has a different bit depth for the alpha channel than for the color channels, the function indexes into the alpha plane using the color channel stride (in_stride) instead of the previously retrieved alpha_stride, causing reads past the end of the alpha buffer (up to 3,123 bytes for a 100×50 image with 10-bit color and 8-bit alpha). A crafted HEIF file can exploit this to cause a denial of service (crash) or potentially disclose adjacent heap memory through leaked bytes embedded in the decoded output pixels. This issue has been fixed in versionThis issue has been fixed in version 1.22.0.

An out-of-bounds read flaw was found in libsndfile's FLAC codec functionality. An attacker who is able to submit a specially crafted file (via tricking a user to open or otherwise) to an application linked with libsndfile and using the FLAC codec, could trigger an out-of-bounds read that would most likely cause a crash but could potentially leak memory information that could be used in further exploitation of other flaws.

In Pillow before 8.1.0, PcxDecode has a buffer over-read when decoding a crafted PCX file because the user-supplied stride value is trusted for buffer calculations.

libheif is an HEIF and AVIF file format decoder and encoder. Prior to version 1.21.0, a crafted HEIF that exercises the overlay image item path triggers a heap buffer over-read in `HeifPixelImage::overlay()`. The function computes a negative row length (likely from an unclipped overlay rectangle or invalid offsets), which then underflows when converted to `size_t` and is passed to `memcpy`, causing a very large read past the end of the source plane and a crash. Version 1.21.0 contains a patch. As a workaround, avoid decoding images using `iovl` overlay boxes.

libImaging/FliDecode.c in Pillow before 6.2.2 has an FLI buffer overflow.