Buffer overflows while decoding setup message from Network due to lack of check of IE message length received from network in Snapdragon Auto, Snapdragon Compute, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon IoT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables in APQ8009, APQ8017, APQ8053, APQ8076, APQ8096, APQ8096AU, APQ8098, Kamorta, MDM9150, MDM9205, MDM9206, MDM9207C, MDM9607, MDM9625, MDM9635M, MDM9640, MDM9645, MDM9650, MDM9655, MSM8905, MSM8909, MSM8909W, MSM8917, MSM8920, MSM8937, MSM8940, MSM8953, MSM8996AU, MSM8998, Nicobar, QCM2150, QCS605, QM215, Rennell, SA415M, SC7180, SC8180X, SDA660, SDA845, SDM429, SDM429W, SDM439, SDM450, SDM630, SDM632, SDM636, SDM660, SDM670, SDM710, SDM845, SDM850, SDX20, SDX24, SM6150, SM7150, SM8150, SXR1130
Possible buffer overflow while processing clientlog and serverlog due to lack of validation of data received in logs in Snapdragon Auto, Snapdragon Consumer IOT, Snapdragon Mobile in APQ8096AU, QCS605, SDM439, SM8150, SXR1130
Buffer overflow can occur in function wlan firmware while copying association frame content if frame length is more than the maximum buffer size in case of SAP mode in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer Electronics Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon IoT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wired Infrastructure and Networking in APQ8009, APQ8017, APQ8053, APQ8064, APQ8096, APQ8096AU, APQ8098, IPQ6018, IPQ8074, MDM9206, MDM9207C, MDM9607, MDM9640, MDM9650, MSM8996, MSM8996AU, MSM8998, Nicobar, QCA4531, QCA6174A, QCA6564, QCA6574AU, QCA6584, QCA6584AU, QCA8081, QCA9377, QCA9379, QCA9886, QCN7605, QCS404, QCS405, QCS605, Rennell, SA6155P, SC7180, SC8180X, SDA660, SDA845, SDM630, SDM636, SDM660, SDM670, SDM710, SDM845, SDM850, SDX20, SDX24, SM6150, SM7150, SM8150, SXR1130, SXR2130
Buffer overflow can occur while parsing RSN IE containing list of PMK ID`s which are more than the buffer size in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer Electronics Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon IoT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wired Infrastructure and Networking in APQ8009, APQ8017, APQ8053, APQ8064, APQ8096, APQ8096AU, APQ8098, IPQ6018, IPQ8074, MDM9206, MDM9207C, MDM9607, MDM9640, MDM9650, MSM8996, MSM8996AU, MSM8998, Nicobar, QCA4531, QCA6174A, QCA6564, QCA6574, QCA6574AU, QCA6584, QCA6584AU, QCA8081, QCA9377, QCA9379, QCA9886, QCN7605, QCS405, QCS605, SA6155P, SC8180X, SDA660, SDA845, SDM630, SDM636, SDM660, SDM670, SDM710, SDM845, SDM850, SDX20, SDX24, SM6150, SM7150, SM8150, SM8250, SXR1130, SXR2130
Buffer overflow occurs while processing LMP packet in which name length parameter exceeds value specified in BT-specification in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer Electronics Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon IoT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables, Snapdragon Wired Infrastructure and Networking in APQ8009, APQ8016, APQ8017, APQ8053, APQ8076, APQ8096, APQ8096AU, APQ8098, MDM9206, MDM9207C, MDM9607, MDM9640, MDM9650, MSM8905, MSM8909, MSM8909W, MSM8917, MSM8920, MSM8937, MSM8939, MSM8940, MSM8953, MSM8996, MSM8996AU, MSM8998, Nicobar, QCA6174A, QCA6390, QCA6574AU, QCA9377, QCA9379, QCA9886, QCM2150, QCN7605, QCS404, QCS405, QCS605, QM215, Rennell, SA6155P, Saipan, SC8180X, SDA660, SDA845, SDM429, SDM429W, SDM439, SDM450, SDM630, SDM632, SDM636, SDM660, SDM670, SDM710, SDM845, SDM850, SDX20, SDX24, SDX55, SM6150, SM7150, SM8150, SM8250, SXR1130, SXR2130
Some Xerox printers (such as the Phaser 3320 V53.006.16.000) were affected by a buffer overflow vulnerability in the attributes parser of the IPP service. This would allow an unauthenticated attacker to cause a Denial of Service (DoS) and potentially execute arbitrary code on the device.
Buffer overflow occur while playing the clip which is nonstandard due to lack of check of size duration in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon IoT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables in APQ8009, APQ8017, APQ8053, APQ8064, APQ8096AU, APQ8098, MDM9206, MDM9207C, MDM9607, MSM8905, MSM8909, MSM8909W, MSM8917, MSM8920, MSM8937, MSM8939, MSM8940, MSM8953, MSM8996, MSM8996AU, Nicobar, QCS605, QM215, Rennell, SA6155P, SDA845, SDM429, SDM429W, SDM439, SDM450, SDM630, SDM632, SDM636, SDM660, SDM670, SDM710, SDM845, SDX20, SM6150, SM7150, SM8150, SM8250, SXR2130
Stack-based buffer overflow vulnerability in Circutor SGE-PLC1000/SGE-PLC50 v9.0.2. In the 'showMeterReport()' function, there is an unlimited user input that is copied to a fixed-size buffer via 'sprintf()'. The 'GetParameter(meter)' function retrieves the user input, which is directly incorporated into a buffer without size validation. An attacker can provide an excessively large input for the “meter” parameter.
A vulnerability was detected in Tenda CH22 1.0.0.1. Affected by this vulnerability is the function fromSafeClientFilter of the file /goform/SafeClientFilter. Performing a manipulation of the argument page results in buffer overflow. The attack can be initiated remotely. The exploit is now public and may be used.
A weakness has been identified in Tenda CH22 1.0.0.1. Affected by this issue is the function fromVirtualSer of the file /goform/VirtualSer. This manipulation of the argument page causes buffer overflow. Remote exploitation of the attack is possible. The exploit has been made available to the public and could be used for attacks.
Memory corruption in WLAN due to buffer copy without checking size of input while parsing keys in Snapdragon Connectivity, Snapdragon Mobile
Possible buffer overflow while handling NAN reception of NMF in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer Electronics Connectivity, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wired Infrastructure and Networking in IPQ6018, IPQ8074, Nicobar, QCA6390, QCA8081, QCN7605, QCS404, QCS405, Rennell, SC7180, SC8180X, SM6150, SM7150, SM8150, SXR2130
Some Xerox printers (such as the Phaser 3320 V53.006.16.000) were affected by a buffer overflow vulnerability in the Authentication Cookie of the web application that would allow an attacker to execute arbitrary code on the device.
Some Xerox printers (such as the Phaser 3320 V53.006.16.000) were affected by a buffer overflow vulnerability in the Content-Type HTTP Header of the web application that would allow an attacker to execute arbitrary code on the device.
Potential buffer overflow while processing CBF frames due to lack of check of buffer length before copy in Snapdragon Auto, Snapdragon Compute, Snapdragon Consumer Electronics Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Wired Infrastructure and Networking in APQ8098, IPQ6018, IPQ8074, MSM8998, Nicobar, QCA8081, QCN7605, QCS404, QCS605, Rennell, SC7180, SC8180X, SDA660, SDA845, SDM630, SDM636, SDM660, SDM670, SDM710, SDM845, SDM850, SM6150, SM7150, SM8150, SXR1130, SXR2130
Some Kyocera printers (such as the ECOSYS M5526cdw 2R7_2000.001.701) were affected by a buffer overflow vulnerability in the LPD service. This would allow an unauthenticated attacker to cause a Denial of Service (DoS) in the LPD service and potentially execute arbitrary code on the device.
An issue was discovered in Mbed TLS through 3.6.5 and TF-PSA-Crypto 1.0.0. A buffer overflow can occur in public key export for FFDH keys.
A vulnerability was found in Tenda A15 15.13.07.13. Affected is the function fromSetWirelessRepeat of the file /goform/openNetworkGateway. The manipulation of the argument wpapsk_crypto2_4g results in buffer overflow. The attack can be launched remotely. The exploit has been made public and could be used.
Wind River VxWorks 6.9 and vx7 has a Buffer Overflow in the IPv4 component. There is an IPNET security vulnerability: Stack overflow in the parsing of IPv4 packets’ IP options.
A security vulnerability has been detected in TOTOLINK A3300R 17.0.0cu.557_B20221024. This affects the function setDmzCfg of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument ip leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed publicly and may be used.
A weakness has been identified in Tenda AC23 16.03.07.52. This impacts the function formSetVirtualSer of the file /goform/SetVirtualServerCfg. This manipulation of the argument list causes buffer overflow. It is possible to initiate the attack remotely. The exploit has been made available to the public and could be used for attacks.
An issue was discovered on Moxa MGate MB3170 and MB3270 devices before 4.1, MB3280 and MB3480 devices before 3.1, MB3660 devices before 2.3, and MB3180 devices before 2.1. A Buffer overflow in the built-in web server allows remote attackers to initiate DoS, and probably to execute arbitrary code (issue 1 of 2).
Memory corruption in video due to buffer overflow while parsing ps video clips in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables
Memory corruption due to buffer overflow while parsing MKV clips with invalid bitmap size in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables
Memory correction in modem due to buffer overwrite during coap connection
memory corruption in video due to buffer overflow while parsing asf clips in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables
A buffer overflow vulnerability exists in the confsrv ucloud_set_node_location functionality of TCL LinkHub Mesh Wi-Fi MS1G_00_01.00_14. A specially-crafted network packet can lead to a buffer overflow. An attacker can send a malicious packet to trigger this vulnerability.
Insufficient boundary checks when processing a string in mb_ereg_replace allows access to out-of-bounds memory. This issue affects HHVM versions prior to 3.30.12, all versions between 4.0.0 and 4.8.5, all versions between 4.9.0 and 4.23.1, as well as 4.24.0, 4.25.0, 4.26.0, 4.27.0, 4.28.0, and 4.28.1.
A vulnerability was found in Totolink X2000R 1.0.0-B20221212.1452. It has been declared as critical. This vulnerability affects the function formTmultiAP of the file /bin/boa of the component HTTP POST Request Handler. The manipulation of the argument submit-url leads to buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-249856. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
In PHP versions 7.1.x below 7.1.33, 7.2.x below 7.2.24 and 7.3.x below 7.3.11 in certain configurations of FPM setup it is possible to cause FPM module to write past allocated buffers into the space reserved for FCGI protocol data, thus opening the possibility of remote code execution.
The rad_packet_recv function in opt/src/accel-pppd/radius/packet.c suffers from a buffer overflow vulnerability, whereby user input len is copied into a fixed buffer &attr->val.integer without any bound checks. If the client connects to the server and sends a large radius packet, a buffer overflow vulnerability will be triggered.
A CWE-120: Buffer Copy without Checking Size of Input vulnerability exists that could cause a stack-based buffer overflow potentially leading to remote code execution when an attacker sends a specially crafted message. Affected Product: Interactive Graphical SCADA System Data Server (V15.0.0.22020 and prior)
telnetd in GNU inetutils through 2.7 allows an out-of-bounds write in the LINEMODE SLC (Set Local Characters) suboption handler because add_slc does not check whether the buffer is full.
CVE-2026-33446 is a buffer overflow in the authentication sub-system of the Secure Access client prior to 14.50. Attackers with control of a modified server can send a special packet that can overwrite a small portion of memory conceivably leading to memory corruption or a denial of service.
Vyper is a pythonic Smart Contract Language for the ethereum virtual machine. Versions of vyper prior to 0.3.2 suffer from a potential buffer overrun. Importing a function from a JSON interface which returns `bytes` generates bytecode which does not clamp bytes length, potentially resulting in a buffer overrun. Users are advised to upgrade. There are no known workarounds for this issue.
Incorrect reading of system image resulting in buffer overflow when size of system image is increased in Snapdragon Auto, Snapdragon Mobile, Snapdragon Wearables in MDM9607, MSM8909W, Qualcomm 215, SD 210/SD 212/SD 205, SD 425, SD 439 / SD 429, SD 450, SD 625, SD 632, SDM439
Filling media attribute tag names without validating the destination buffer size which can result in the buffer overflow in Snapdragon Auto, Snapdragon Compute, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon IoT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables in APQ8009, APQ8017, APQ8053, APQ8096AU, APQ8098, MDM9150, MDM9205, MDM9206, MDM9607, MDM9615, MDM9625, MDM9635M, MDM9640, MDM9645, MDM9650, MDM9655, MSM8905, MSM8909, MSM8909W, MSM8917, MSM8920, MSM8937, MSM8940, MSM8953, MSM8996AU, MSM8998, Nicobar, QCM2150, QCS605, QM215, Rennell, SC8180X, SDA660, SDA845, SDM429, SDM429W, SDM439, SDM450, SDM630, SDM632, SDM636, SDM660, SDM670, SDM710, SDM845, SDM850, SDX20, SDX24, SDX55, SM6150, SM7150, SM8150, SXR1130
Buffer overflow in WLAN NAN function due to lack of check of count value received in NAN availability attribute in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer Electronics Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wired Infrastructure and Networking in IPQ8074, MSM8996AU, QCA6174A, QCA6574AU, QCA8081, QCA9377, QCA9379, QCS404, QCS405, QCS605, SD 636, SD 665, SD 675, SD 712 / SD 710 / SD 670, SD 730, SD 820, SD 835, SD 845 / SD 850, SD 855, SD 8CX, SDA660, SDM630, SDM660, SXR1130
While playing the clip which is nonstandard buffer overflow can occur while parsing in Snapdragon Auto, Snapdragon Compute, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon IoT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables in MDM9206, MDM9607, MSM8909W, MSM8996AU, QCA6574AU, QCS405, QCS605, Qualcomm 215, SD 210/SD 212/SD 205, SD 425, SD 427, SD 430, SD 435, SD 439 / SD 429, SD 450, SD 600, SD 615/16/SD 415, SD 625, SD 632, SD 636, SD 665, SD 675, SD 712 / SD 710 / SD 670, SD 730, SD 820, SD 820A, SD 835, SD 845 / SD 850, SD 855, SDA660, SDM439, SDM630, SDM660, SDX20
Buffer overflow can occur when processing non standard SDP video Image attribute parameter in a VILTE\VOLTE call in Snapdragon Auto, Snapdragon Compute, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon IoT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables in APQ8009, APQ8017, APQ8053, APQ8076, APQ8096, APQ8096AU, APQ8098, MDM9150, MDM9206, MDM9607, MDM9640, MDM9645, MDM9650, MDM9655, MSM8905, MSM8909, MSM8909W, MSM8917, MSM8920, MSM8937, MSM8940, MSM8953, MSM8996AU, MSM8998, Nicobar, QCM2150, QCS605, QM215, Rennell, SC8180X, SDA660, SDA845, SDM429, SDM429W, SDM439, SDM450, SDM630, SDM632, SDM636, SDM660, SDM670, SDM710, SDM845, SDM850, SDX20, SDX24, SDX55, SM6150, SM7150, SM8150, SXR1130
The rad_packet_recv function in radius/packet.c suffers from a memcpy buffer overflow, resulting in an overly-large recvfrom into a fixed buffer that causes a buffer overflow and overwrites arbitrary memory. If the server connects with a malicious client, crafted client requests can remotely trigger this vulnerability.
PJSIP is a free and open source multimedia communication library written in C language. In versions prior to and including 2.12 PJSIP there is a stack-buffer overflow vulnerability which only impacts PJSIP users who accept hashed digest credentials (credentials with data_type `PJSIP_CRED_DATA_DIGEST`). This issue has been patched in the master branch of the PJSIP repository and will be included with the next release. Users unable to upgrade need to check that the hashed digest data length must be equal to `PJSIP_MD5STRLEN` before passing to PJSIP.
xrdp is an open source project which provides a graphical login to remote machines using Microsoft Remote Desktop Protocol (RDP). xrdp < v0.9.21 contain a buffer over flow in devredir_proc_client_devlist_announce_req() function. There are no known workarounds for this issue. Users are advised to upgrade.
A buffer overflow vulnerability exists in the GetValue functionality of TCL LinkHub Mesh Wi-Fi MS1G_00_01.00_14. A specially-crafted configuration value can lead to a buffer overflow. An attacker can modify a configuration value to trigger this vulnerability.This vulnerability represents all occurances of the buffer overflow vulnerability within the confsrv binary.
A buffer overflow vulnerability exists in the GetValue functionality of TCL LinkHub Mesh Wi-Fi MS1G_00_01.00_14. A specially-crafted configuration value can lead to a buffer overflow. An attacker can modify a configuration value to trigger this vulnerability.This vulnerability represents all occurances of the buffer overflow vulnerability within the telnet_ate_monitor binary.
A buffer overflow vulnerability exists in the GetValue functionality of TCL LinkHub Mesh Wi-Fi MS1G_00_01.00_14. A specially-crafted configuration value can lead to a buffer overflow. An attacker can modify a configuration value to trigger this vulnerability.This vulnerability represents all occurances of the buffer overflow vulnerability within the multiWAN binary.
A buffer overflow vulnerability exists in the GetValue functionality of TCL LinkHub Mesh Wi-Fi MS1G_00_01.00_14. A specially-crafted configuration value can lead to a buffer overflow. An attacker can modify a configuration value to trigger this vulnerability.This vulnerability represents all occurances of the buffer overflow vulnerability within the online_process binary.
A buffer overflow vulnerability exists in the GetValue functionality of TCL LinkHub Mesh Wi-Fi MS1G_00_01.00_14. A specially-crafted configuration value can lead to a buffer overflow. An attacker can modify a configuration value to trigger this vulnerability.This vulnerability represents all occurances of the buffer overflow vulnerability within the log_upload binary.
A buffer overflow vulnerability exists in the GetValue functionality of TCL LinkHub Mesh Wi-Fi MS1G_00_01.00_14. A specially-crafted configuration value can lead to a buffer overflow. An attacker can modify a configuration value to trigger this vulnerability.This vulnerability represents all occurances of the buffer overflow vulnerability within the cfm binary.
A buffer overflow vulnerability exists in the GetValue functionality of TCL LinkHub Mesh Wi-Fi MS1G_00_01.00_14. A specially-crafted configuration value can lead to a buffer overflow. An attacker can modify a configuration value to trigger this vulnerability.This vulnerability represents all occurances of the buffer overflow vulnerability within the gpio_ctrl binary.