In the Linux kernel, the following vulnerability has been resolved: tty: Fix a possible resource leak in icom_probe When pci_read_config_dword failed, call pci_release_regions() and pci_disable_device() to recycle the resource previously allocated.

In the Linux kernel, the following vulnerability has been resolved: drm/tegra: Fix reference leak in tegra_dsi_ganged_probe The reference taken by 'of_find_device_by_node()' must be released when not needed anymore. Add put_device() call to fix this.

In the Linux kernel, the following vulnerability has been resolved: clk: qcom: clk-rcg2: Update logic to calculate D value for RCG The display pixel clock has a requirement on certain newer platforms to support M/N as (2/3) and the final D value calculated results in underflow errors. As the current implementation does not check for D value is within the accepted range for a given M & N value. Update the logic to calculate the final D value based on the range.

In the Linux kernel, the following vulnerability has been resolved: net/smc: Avoid overwriting the copies of clcsock callback functions The callback functions of clcsock will be saved and replaced during the fallback. But if the fallback happens more than once, then the copies of these callback functions will be overwritten incorrectly, resulting in a loop call issue: clcsk->sk_error_report |- smc_fback_error_report() <------------------------------| |- smc_fback_forward_wakeup() | (loop) |- clcsock_callback() (incorrectly overwritten) | |- smc->clcsk_error_report() ------------------| So this patch fixes the issue by saving these function pointers only once in the fallback and avoiding overwriting.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btmtksdio: Fix kernel oops in btmtksdio_interrupt Fix the following kernel oops in btmtksdio_interrrupt [ 14.339134] btmtksdio_interrupt+0x28/0x54 [ 14.339139] process_sdio_pending_irqs+0x68/0x1a0 [ 14.339144] sdio_irq_work+0x40/0x70 [ 14.339154] process_one_work+0x184/0x39c [ 14.339160] worker_thread+0x228/0x3e8 [ 14.339168] kthread+0x148/0x3ac [ 14.339176] ret_from_fork+0x10/0x30 That happened because hdev->power_on is already called before sdio_set_drvdata which btmtksdio_interrupt handler relies on is not properly set up. The details are shown as the below: hci_register_dev would run queue_work(hdev->req_workqueue, &hdev->power_on) as WQ_HIGHPRI workqueue_struct to complete the power-on sequeunce and thus hci_power_on may run before sdio_set_drvdata is done in btmtksdio_probe. The hci_dev_do_open in hci_power_on would initialize the device and enable the interrupt and thus it is possible that btmtksdio_interrupt is being called right before sdio_set_drvdata is filled out. When btmtksdio_interrupt is being called and sdio_set_drvdata is not filled , the kernel oops is going to happen because btmtksdio_interrupt access an uninitialized pointer.

In the Linux kernel, the following vulnerability has been resolved: exfat: fix overflow for large capacity partition Using int type for sector index, there will be overflow in a large capacity partition. For example, if storage with sector size of 512 bytes and partition capacity is larger than 2TB, there will be overflow.

In the Linux kernel, the following vulnerability has been resolved: ovl: fix NULL pointer dereference in copy up warning This patch is fixing a NULL pointer dereference to get a recently introduced warning message working.

In the Linux kernel, the following vulnerability has been resolved: net: sfc: add missing xdp queue reinitialization After rx/tx ring buffer size is changed, kernel panic occurs when it acts XDP_TX or XDP_REDIRECT. When tx/rx ring buffer size is changed(ethtool -G), sfc driver reallocates and reinitializes rx and tx queues and their buffer (tx_queue->buffer). But it misses reinitializing xdp queues(efx->xdp_tx_queues). So, while it is acting XDP_TX or XDP_REDIRECT, it uses the uninitialized tx_queue->buffer. A new function efx_set_xdp_channels() is separated from efx_set_channels() to handle only xdp queues. Splat looks like: BUG: kernel NULL pointer dereference, address: 000000000000002a #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#4] PREEMPT SMP NOPTI RIP: 0010:efx_tx_map_chunk+0x54/0x90 [sfc] CPU: 2 PID: 0 Comm: swapper/2 Tainted: G D 5.17.0+ #55 e8beeee8289528f11357029357cf Code: 48 8b 8d a8 01 00 00 48 8d 14 52 4c 8d 2c d0 44 89 e0 48 85 c9 74 0e 44 89 e2 4c 89 f6 48 80 RSP: 0018:ffff92f121e45c60 EFLAGS: 00010297 RIP: 0010:efx_tx_map_chunk+0x54/0x90 [sfc] RAX: 0000000000000040 RBX: ffff92ea506895c0 RCX: ffffffffc0330870 RDX: 0000000000000001 RSI: 00000001139b10ce RDI: ffff92ea506895c0 RBP: ffffffffc0358a80 R08: 00000001139b110d R09: 0000000000000000 R10: 0000000000000001 R11: ffff92ea414c0088 R12: 0000000000000040 R13: 0000000000000018 R14: 00000001139b10ce R15: ffff92ea506895c0 FS: 0000000000000000(0000) GS:ffff92f121ec0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Code: 48 8b 8d a8 01 00 00 48 8d 14 52 4c 8d 2c d0 44 89 e0 48 85 c9 74 0e 44 89 e2 4c 89 f6 48 80 CR2: 000000000000002a CR3: 00000003e6810004 CR4: 00000000007706e0 RSP: 0018:ffff92f121e85c60 EFLAGS: 00010297 PKRU: 55555554 RAX: 0000000000000040 RBX: ffff92ea50689700 RCX: ffffffffc0330870 RDX: 0000000000000001 RSI: 00000001145a90ce RDI: ffff92ea50689700 RBP: ffffffffc0358a80 R08: 00000001145a910d R09: 0000000000000000 R10: 0000000000000001 R11: ffff92ea414c0088 R12: 0000000000000040 R13: 0000000000000018 R14: 00000001145a90ce R15: ffff92ea50689700 FS: 0000000000000000(0000) GS:ffff92f121e80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000002a CR3: 00000003e6810005 CR4: 00000000007706e0 PKRU: 55555554 Call Trace: <IRQ> efx_xdp_tx_buffers+0x12b/0x3d0 [sfc 84c94b8e32d44d296c17e10a634d3ad454de4ba5] __efx_rx_packet+0x5c3/0x930 [sfc 84c94b8e32d44d296c17e10a634d3ad454de4ba5] efx_rx_packet+0x28c/0x2e0 [sfc 84c94b8e32d44d296c17e10a634d3ad454de4ba5] efx_ef10_ev_process+0x5f8/0xf40 [sfc 84c94b8e32d44d296c17e10a634d3ad454de4ba5] ? enqueue_task_fair+0x95/0x550 efx_poll+0xc4/0x360 [sfc 84c94b8e32d44d296c17e10a634d3ad454de4ba5]

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix macsec possible null dereference when updating MAC security entity (SecY) Upon updating MAC security entity (SecY) in hw offload path, the macsec security association (SA) initialization routine is called. In case of extended packet number (epn) is enabled the salt and ssci attributes are retrieved using the MACsec driver rx_sa context which is unavailable when updating a SecY property such as encoding-sa hence the null dereference. Fix by using the provided SA to set those attributes.

In the Linux kernel, the following vulnerability has been resolved: jffs2: fix memory leak in jffs2_scan_medium If an error is returned in jffs2_scan_eraseblock() and some memory has been added to the jffs2_summary *s, we can observe the following kmemleak report: -------------------------------------------- unreferenced object 0xffff88812b889c40 (size 64): comm "mount", pid 692, jiffies 4294838325 (age 34.288s) hex dump (first 32 bytes): 40 48 b5 14 81 88 ff ff 01 e0 31 00 00 00 50 00 @H........1...P. 00 00 01 00 00 00 01 00 00 00 02 00 00 00 09 08 ................ backtrace: [<ffffffffae93a3a3>] __kmalloc+0x613/0x910 [<ffffffffaf423b9c>] jffs2_sum_add_dirent_mem+0x5c/0xa0 [<ffffffffb0f3afa8>] jffs2_scan_medium.cold+0x36e5/0x4794 [<ffffffffb0f3dbe1>] jffs2_do_mount_fs.cold+0xa7/0x2267 [<ffffffffaf40acf3>] jffs2_do_fill_super+0x383/0xc30 [<ffffffffaf40c00a>] jffs2_fill_super+0x2ea/0x4c0 [<ffffffffb0315d64>] mtd_get_sb+0x254/0x400 [<ffffffffb0315f5f>] mtd_get_sb_by_nr+0x4f/0xd0 [<ffffffffb0316478>] get_tree_mtd+0x498/0x840 [<ffffffffaf40bd15>] jffs2_get_tree+0x25/0x30 [<ffffffffae9f358d>] vfs_get_tree+0x8d/0x2e0 [<ffffffffaea7a98f>] path_mount+0x50f/0x1e50 [<ffffffffaea7c3d7>] do_mount+0x107/0x130 [<ffffffffaea7c5c5>] __se_sys_mount+0x1c5/0x2f0 [<ffffffffaea7c917>] __x64_sys_mount+0xc7/0x160 [<ffffffffb10142f5>] do_syscall_64+0x45/0x70 unreferenced object 0xffff888114b54840 (size 32): comm "mount", pid 692, jiffies 4294838325 (age 34.288s) hex dump (first 32 bytes): c0 75 b5 14 81 88 ff ff 02 e0 02 00 00 00 02 00 .u.............. 00 00 84 00 00 00 44 00 00 00 6b 6b 6b 6b 6b a5 ......D...kkkkk. backtrace: [<ffffffffae93be24>] kmem_cache_alloc_trace+0x584/0x880 [<ffffffffaf423b04>] jffs2_sum_add_inode_mem+0x54/0x90 [<ffffffffb0f3bd44>] jffs2_scan_medium.cold+0x4481/0x4794 [...] unreferenced object 0xffff888114b57280 (size 32): comm "mount", pid 692, jiffies 4294838393 (age 34.357s) hex dump (first 32 bytes): 10 d5 6c 11 81 88 ff ff 08 e0 05 00 00 00 01 00 ..l............. 00 00 38 02 00 00 28 00 00 00 6b 6b 6b 6b 6b a5 ..8...(...kkkkk. backtrace: [<ffffffffae93be24>] kmem_cache_alloc_trace+0x584/0x880 [<ffffffffaf423c34>] jffs2_sum_add_xattr_mem+0x54/0x90 [<ffffffffb0f3a24f>] jffs2_scan_medium.cold+0x298c/0x4794 [...] unreferenced object 0xffff8881116cd510 (size 16): comm "mount", pid 692, jiffies 4294838395 (age 34.355s) hex dump (first 16 bytes): 00 00 00 00 00 00 00 00 09 e0 60 02 00 00 6b a5 ..........`...k. backtrace: [<ffffffffae93be24>] kmem_cache_alloc_trace+0x584/0x880 [<ffffffffaf423cc4>] jffs2_sum_add_xref_mem+0x54/0x90 [<ffffffffb0f3b2e3>] jffs2_scan_medium.cold+0x3a20/0x4794 [...] -------------------------------------------- Therefore, we should call jffs2_sum_reset_collected(s) on exit to release the memory added in s. In addition, a new tag "out_buf" is added to prevent the NULL pointer reference caused by s being NULL. (thanks to Zhang Yi for this analysis)

In the Linux kernel, the following vulnerability has been resolved: btrfs: prevent copying too big compressed lzo segment Compressed length can be corrupted to be a lot larger than memory we have allocated for buffer. This will cause memcpy in copy_compressed_segment to write outside of allocated memory. This mostly results in stuck read syscall but sometimes when using btrfs send can get #GP kernel: general protection fault, probably for non-canonical address 0x841551d5c1000: 0000 [#1] PREEMPT SMP NOPTI kernel: CPU: 17 PID: 264 Comm: kworker/u256:7 Tainted: P OE 5.17.0-rc2-1 #12 kernel: Workqueue: btrfs-endio btrfs_work_helper [btrfs] kernel: RIP: 0010:lzo_decompress_bio (./include/linux/fortify-string.h:225 fs/btrfs/lzo.c:322 fs/btrfs/lzo.c:394) btrfs Code starting with the faulting instruction =========================================== 0:* 48 8b 06 mov (%rsi),%rax <-- trapping instruction 3: 48 8d 79 08 lea 0x8(%rcx),%rdi 7: 48 83 e7 f8 and $0xfffffffffffffff8,%rdi b: 48 89 01 mov %rax,(%rcx) e: 44 89 f0 mov %r14d,%eax 11: 48 8b 54 06 f8 mov -0x8(%rsi,%rax,1),%rdx kernel: RSP: 0018:ffffb110812efd50 EFLAGS: 00010212 kernel: RAX: 0000000000001000 RBX: 000000009ca264c8 RCX: ffff98996e6d8ff8 kernel: RDX: 0000000000000064 RSI: 000841551d5c1000 RDI: ffffffff9500435d kernel: RBP: ffff989a3be856c0 R08: 0000000000000000 R09: 0000000000000000 kernel: R10: 0000000000000000 R11: 0000000000001000 R12: ffff98996e6d8000 kernel: R13: 0000000000000008 R14: 0000000000001000 R15: 000841551d5c1000 kernel: FS: 0000000000000000(0000) GS:ffff98a09d640000(0000) knlGS:0000000000000000 kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 kernel: CR2: 00001e9f984d9ea8 CR3: 000000014971a000 CR4: 00000000003506e0 kernel: Call Trace: kernel: <TASK> kernel: end_compressed_bio_read (fs/btrfs/compression.c:104 fs/btrfs/compression.c:1363 fs/btrfs/compression.c:323) btrfs kernel: end_workqueue_fn (fs/btrfs/disk-io.c:1923) btrfs kernel: btrfs_work_helper (fs/btrfs/async-thread.c:326) btrfs kernel: process_one_work (./arch/x86/include/asm/jump_label.h:27 ./include/linux/jump_label.h:212 ./include/trace/events/workqueue.h:108 kernel/workqueue.c:2312) kernel: worker_thread (./include/linux/list.h:292 kernel/workqueue.c:2455) kernel: ? process_one_work (kernel/workqueue.c:2397) kernel: kthread (kernel/kthread.c:377) kernel: ? kthread_complete_and_exit (kernel/kthread.c:332) kernel: ret_from_fork (arch/x86/entry/entry_64.S:301) kernel: </TASK>

In the Linux kernel, the following vulnerability has been resolved: net: dsa: fix panic on shutdown if multi-chip tree failed to probe DSA probing is atypical because a tree of devices must probe all at once, so out of N switches which call dsa_tree_setup_routing_table() during probe, for (N - 1) of them, "complete" will return false and they will exit probing early. The Nth switch will set up the whole tree on their behalf. The implication is that for (N - 1) switches, the driver binds to the device successfully, without doing anything. When the driver is bound, the ->shutdown() method may run. But if the Nth switch has failed to initialize the tree, there is nothing to do for the (N - 1) driver instances, since the slave devices have not been created, etc. Moreover, dsa_switch_shutdown() expects that the calling @ds has been in fact initialized, so it jumps at dereferencing the various data structures, which is incorrect. Avoid the ensuing NULL pointer dereferences by simply checking whether the Nth switch has previously set "ds->setup = true" for the switch which is currently shutting down. The entire setup is serialized under dsa2_mutex which we already hold.

In the Linux kernel, the following vulnerability has been resolved: Drivers: hv: vmbus: Fix initialization of device object in vmbus_device_register() Initialize the device's dma_{mask,parms} pointers and the device's dma_mask value before invoking device_register(). Address the following trace with 5.17-rc7: [ 49.646839] WARNING: CPU: 0 PID: 189 at include/linux/dma-mapping.h:543 netvsc_probe+0x37a/0x3a0 [hv_netvsc] [ 49.646928] Call Trace: [ 49.646930] <TASK> [ 49.646935] vmbus_probe+0x40/0x60 [hv_vmbus] [ 49.646942] really_probe+0x1ce/0x3b0 [ 49.646948] __driver_probe_device+0x109/0x180 [ 49.646952] driver_probe_device+0x23/0xa0 [ 49.646955] __device_attach_driver+0x76/0xe0 [ 49.646958] ? driver_allows_async_probing+0x50/0x50 [ 49.646961] bus_for_each_drv+0x84/0xd0 [ 49.646964] __device_attach+0xed/0x170 [ 49.646967] device_initial_probe+0x13/0x20 [ 49.646970] bus_probe_device+0x8f/0xa0 [ 49.646973] device_add+0x41a/0x8e0 [ 49.646975] ? hrtimer_init+0x28/0x80 [ 49.646981] device_register+0x1b/0x20 [ 49.646983] vmbus_device_register+0x5e/0xf0 [hv_vmbus] [ 49.646991] vmbus_add_channel_work+0x12d/0x190 [hv_vmbus] [ 49.646999] process_one_work+0x21d/0x3f0 [ 49.647002] worker_thread+0x4a/0x3b0 [ 49.647005] ? process_one_work+0x3f0/0x3f0 [ 49.647007] kthread+0xff/0x130 [ 49.647011] ? kthread_complete_and_exit+0x20/0x20 [ 49.647015] ret_from_fork+0x22/0x30 [ 49.647020] </TASK> [ 49.647021] ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: host: Stop setting the ACPI companion It is no longer needed. The sysdev pointer is now used when assigning the ACPI companions to the xHCI ports and USB devices. Assigning the ACPI companion here resulted in the fwnode->secondary pointer to be replaced also for the parent dwc3 device since the primary fwnode (the ACPI companion) was shared. That was unintentional and it created potential side effects like resource leaks.

In the Linux kernel, the following vulnerability has been resolved: net: dsa: seville: register the mdiobus under devres As explained in commits: 74b6d7d13307 ("net: dsa: realtek: register the MDIO bus under devres") 5135e96a3dd2 ("net: dsa: don't allocate the slave_mii_bus using devres") mdiobus_free() will panic when called from devm_mdiobus_free() <- devres_release_all() <- __device_release_driver(), and that mdiobus was not previously unregistered. The Seville VSC9959 switch is a platform device, so the initial set of constraints that I thought would cause this (I2C or SPI buses which call ->remove on ->shutdown) do not apply. But there is one more which applies here. If the DSA master itself is on a bus that calls ->remove from ->shutdown (like dpaa2-eth, which is on the fsl-mc bus), there is a device link between the switch and the DSA master, and device_links_unbind_consumers() will unbind the seville switch driver on shutdown. So the same treatment must be applied to all DSA switch drivers, which is: either use devres for both the mdiobus allocation and registration, or don't use devres at all. The seville driver has a code structure that could accommodate both the mdiobus_unregister and mdiobus_free calls, but it has an external dependency upon mscc_miim_setup() from mdio-mscc-miim.c, which calls devm_mdiobus_alloc_size() on its behalf. So rather than restructuring that, and exporting yet one more symbol mscc_miim_teardown(), let's work with devres and replace of_mdiobus_register with the devres variant. When we use all-devres, we can ensure that devres doesn't free a still-registered bus (it either runs both callbacks, or none).

In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Fix memleak in tcp_bpf_sendmsg while sk msg is full If tcp_bpf_sendmsg() is running while sk msg is full. When sk_msg_alloc() returns -ENOMEM error, tcp_bpf_sendmsg() goes to wait_for_memory. If partial memory has been alloced by sk_msg_alloc(), that is, msg_tx->sg.size is greater than osize after sk_msg_alloc(), memleak occurs. To fix we use sk_msg_trim() to release the allocated memory, then goto wait for memory. Other call paths of sk_msg_alloc() have the similar issue, such as tls_sw_sendmsg(), so handle sk_msg_trim logic inside sk_msg_alloc(), as Cong Wang suggested. This issue can cause the following info: WARNING: CPU: 3 PID: 7950 at net/core/stream.c:208 sk_stream_kill_queues+0xd4/0x1a0 Call Trace: <TASK> inet_csk_destroy_sock+0x55/0x110 __tcp_close+0x279/0x470 tcp_close+0x1f/0x60 inet_release+0x3f/0x80 __sock_release+0x3d/0xb0 sock_close+0x11/0x20 __fput+0x92/0x250 task_work_run+0x6a/0xa0 do_exit+0x33b/0xb60 do_group_exit+0x2f/0xa0 get_signal+0xb6/0x950 arch_do_signal_or_restart+0xac/0x2a0 exit_to_user_mode_prepare+0xa9/0x200 syscall_exit_to_user_mode+0x12/0x30 do_syscall_64+0x46/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae </TASK> WARNING: CPU: 3 PID: 2094 at net/ipv4/af_inet.c:155 inet_sock_destruct+0x13c/0x260 Call Trace: <TASK> __sk_destruct+0x24/0x1f0 sk_psock_destroy+0x19b/0x1c0 process_one_work+0x1b3/0x3c0 kthread+0xe6/0x110 ret_from_fork+0x22/0x30 </TASK>

In the Linux kernel, the following vulnerability has been resolved: scsi: zorro7xx: Fix a resource leak in zorro7xx_remove_one() The error handling path of the probe releases a resource that is not freed in the remove function. In some cases, a ioremap() must be undone. Add the missing iounmap() call in the remove function.

In the Linux kernel, the following vulnerability has been resolved: crypto: octeontx2 - remove CONFIG_DM_CRYPT check No issues were found while using the driver with dm-crypt enabled. So CONFIG_DM_CRYPT check in the driver can be removed. This also fixes the NULL pointer dereference in driver release if CONFIG_DM_CRYPT is enabled. ... Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 ... Call trace: crypto_unregister_alg+0x68/0xfc crypto_unregister_skciphers+0x44/0x60 otx2_cpt_crypto_exit+0x100/0x1a0 otx2_cptvf_remove+0xf8/0x200 pci_device_remove+0x3c/0xd4 __device_release_driver+0x188/0x234 device_release_driver+0x2c/0x4c ...

In the Linux kernel, the following vulnerability has been resolved: ethernet: aeroflex: fix potential skb leak in greth_init_rings() The greth_init_rings() function won't free the newly allocated skb when dma_mapping_error() returns error, so add dev_kfree_skb() to fix it. Compile tested only.

In the Linux kernel, the following vulnerability has been resolved: RDMA/cxgb4: Added NULL check for lookup_atid The lookup_atid() function can return NULL if the ATID is invalid or does not exist in the identifier table, which could lead to dereferencing a null pointer without a check in the `act_establish()` and `act_open_rpl()` functions. Add a NULL check to prevent null pointer dereferencing. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: eeprom: ee1004: limit i2c reads to I2C_SMBUS_BLOCK_MAX Commit effa453168a7 ("i2c: i801: Don't silently correct invalid transfer size") revealed that ee1004_eeprom_read() did not properly limit how many bytes to read at once. In particular, i2c_smbus_read_i2c_block_data_or_emulated() takes the length to read as an u8. If count == 256 after taking into account the offset and page boundary, the cast to u8 overflows. And this is common when user space tries to read the entire EEPROM at once. To fix it, limit each read to I2C_SMBUS_BLOCK_MAX (32) bytes, already the maximum length i2c_smbus_read_i2c_block_data_or_emulated() allows.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: fix nft_counters_enabled underflow at nf_tables_addchain() syzbot is reporting underflow of nft_counters_enabled counter at nf_tables_addchain() [1], for commit 43eb8949cfdffa76 ("netfilter: nf_tables: do not leave chain stats enabled on error") missed that nf_tables_chain_destroy() after nft_basechain_init() in the error path of nf_tables_addchain() decrements the counter because nft_basechain_init() makes nft_is_base_chain() return true by setting NFT_CHAIN_BASE flag. Increment the counter immediately after returning from nft_basechain_init().

In the Linux kernel, the following vulnerability has been resolved: ASoC: mxs: Fix error handling in mxs_sgtl5000_probe This function only calls of_node_put() in the regular path. And it will cause refcount leak in error paths. For example, when codec_np is NULL, saif_np[0] and saif_np[1] are not NULL, it will cause leaks. of_node_put() will check if the node pointer is NULL, so we can call it directly to release the refcount of regular pointers.

In the Linux kernel, the following vulnerability has been resolved: s390/cio: verify the driver availability for path_event call If no driver is attached to a device or the driver does not provide the path_event function, an FCES path-event on this device could end up in a kernel-panic. Verify the driver availability before the path_event function call.

In the Linux kernel, the following vulnerability has been resolved: char: xillybus: fix a refcount leak in cleanup_dev() usb_get_dev is called in xillyusb_probe. So it is better to call usb_put_dev before xdev is released.

In the Linux kernel, the following vulnerability has been resolved: block: fix memory leak in disk_register_independent_access_ranges kobject_init_and_add() takes reference even when it fails. According to the doc of kobject_init_and_add() If this function returns an error, kobject_put() must be called to properly clean up the memory associated with the object. Fix this issue by adding kobject_put(). Callback function blk_ia_ranges_sysfs_release() in kobject_put() can handle the pointer "iars" properly.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix a NULL pointer dereference in amdgpu_dm_connector_add_common_modes() In amdgpu_dm_connector_add_common_modes(), amdgpu_dm_create_common_mode() is assigned to mode and is passed to drm_mode_probed_add() directly after that. drm_mode_probed_add() passes &mode->head to list_add_tail(), and there is a dereference of it in list_add_tail() without recoveries, which could lead to NULL pointer dereference on failure of amdgpu_dm_create_common_mode(). Fix this by adding a NULL check of mode. This bug was found by a static analyzer. Builds with 'make allyesconfig' show no new warnings, and our static analyzer no longer warns about this code.

In the Linux kernel, the following vulnerability has been resolved: scsi: bnx2fc: Make bnx2fc_recv_frame() mp safe Running tests with a debug kernel shows that bnx2fc_recv_frame() is modifying the per_cpu lport stats counters in a non-mpsafe way. Just boot a debug kernel and run the bnx2fc driver with the hardware enabled. [ 1391.699147] BUG: using smp_processor_id() in preemptible [00000000] code: bnx2fc_ [ 1391.699160] caller is bnx2fc_recv_frame+0xbf9/0x1760 [bnx2fc] [ 1391.699174] CPU: 2 PID: 4355 Comm: bnx2fc_l2_threa Kdump: loaded Tainted: G B [ 1391.699180] Hardware name: HP ProLiant DL120 G7, BIOS J01 07/01/2013 [ 1391.699183] Call Trace: [ 1391.699188] dump_stack_lvl+0x57/0x7d [ 1391.699198] check_preemption_disabled+0xc8/0xd0 [ 1391.699205] bnx2fc_recv_frame+0xbf9/0x1760 [bnx2fc] [ 1391.699215] ? do_raw_spin_trylock+0xb5/0x180 [ 1391.699221] ? bnx2fc_npiv_create_vports.isra.0+0x4e0/0x4e0 [bnx2fc] [ 1391.699229] ? bnx2fc_l2_rcv_thread+0xb7/0x3a0 [bnx2fc] [ 1391.699240] bnx2fc_l2_rcv_thread+0x1af/0x3a0 [bnx2fc] [ 1391.699250] ? bnx2fc_ulp_init+0xc0/0xc0 [bnx2fc] [ 1391.699258] kthread+0x364/0x420 [ 1391.699263] ? _raw_spin_unlock_irq+0x24/0x50 [ 1391.699268] ? set_kthread_struct+0x100/0x100 [ 1391.699273] ret_from_fork+0x22/0x30 Restore the old get_cpu/put_cpu code with some modifications to reduce the size of the critical section.

In the Linux kernel, the following vulnerability has been resolved: staging: wfx: fix an error handling in wfx_init_common() One error handler of wfx_init_common() return without calling ieee80211_free_hw(hw), which may result in memory leak. And I add one err label to unify the error handler, which is useful for the subsequent changes.

In the Linux kernel, the following vulnerability has been resolved: iommu/arm-smmu-v3: check return value after calling platform_get_resource() It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value.

In the Linux kernel, the following vulnerability has been resolved: drm/panel: ili9341: fix optional regulator handling If the optional regulator lookup fails, reset the pointer to NULL. Other functions such as mipi_dbi_poweron_reset_conditional() only do a NULL pointer check and will otherwise dereference the error pointer.

In the Linux kernel, the following vulnerability has been resolved: cifs: fix handlecache and multiuser In multiuser each individual user has their own tcon structure for the share and thus their own handle for a cached directory. When we umount such a share we much make sure to release the pinned down dentry for each such tcon and not just the master tcon. Otherwise we will get nasty warnings on umount that dentries are still in use: [ 3459.590047] BUG: Dentry 00000000115c6f41{i=12000000019d95,n=/} still in use\ (2) [unmount of cifs cifs] ... [ 3459.590492] Call Trace: [ 3459.590500] d_walk+0x61/0x2a0 [ 3459.590518] ? shrink_lock_dentry.part.0+0xe0/0xe0 [ 3459.590526] shrink_dcache_for_umount+0x49/0x110 [ 3459.590535] generic_shutdown_super+0x1a/0x110 [ 3459.590542] kill_anon_super+0x14/0x30 [ 3459.590549] cifs_kill_sb+0xf5/0x104 [cifs] [ 3459.590773] deactivate_locked_super+0x36/0xa0 [ 3459.590782] cleanup_mnt+0x131/0x190 [ 3459.590789] task_work_run+0x5c/0x90 [ 3459.590798] exit_to_user_mode_loop+0x151/0x160 [ 3459.590809] exit_to_user_mode_prepare+0x83/0xd0 [ 3459.590818] syscall_exit_to_user_mode+0x12/0x30 [ 3459.590828] do_syscall_64+0x48/0x90 [ 3459.590833] entry_SYSCALL_64_after_hwframe+0x44/0xae

In the Linux kernel, the following vulnerability has been resolved: can: af_can: fix NULL pointer dereference in can_rcv_filter Analogue to commit 8aa59e355949 ("can: af_can: fix NULL pointer dereference in can_rx_register()") we need to check for a missing initialization of ml_priv in the receive path of CAN frames. Since commit 4e096a18867a ("net: introduce CAN specific pointer in the struct net_device") the check for dev->type to be ARPHRD_CAN is not sufficient anymore since bonding or tun netdevices claim to be CAN devices but do not initialize ml_priv accordingly.

In the Linux kernel, the following vulnerability has been resolved: rtc: gamecube: Fix refcount leak in gamecube_rtc_read_offset_from_sram The of_find_compatible_node() function returns a node pointer with refcount incremented, We should use of_node_put() on it when done Add the missing of_node_put() to release the refcount.

In the Linux kernel, the following vulnerability has been resolved: net: dsa: felix: don't use devres for mdiobus As explained in commits: 74b6d7d13307 ("net: dsa: realtek: register the MDIO bus under devres") 5135e96a3dd2 ("net: dsa: don't allocate the slave_mii_bus using devres") mdiobus_free() will panic when called from devm_mdiobus_free() <- devres_release_all() <- __device_release_driver(), and that mdiobus was not previously unregistered. The Felix VSC9959 switch is a PCI device, so the initial set of constraints that I thought would cause this (I2C or SPI buses which call ->remove on ->shutdown) do not apply. But there is one more which applies here. If the DSA master itself is on a bus that calls ->remove from ->shutdown (like dpaa2-eth, which is on the fsl-mc bus), there is a device link between the switch and the DSA master, and device_links_unbind_consumers() will unbind the felix switch driver on shutdown. So the same treatment must be applied to all DSA switch drivers, which is: either use devres for both the mdiobus allocation and registration, or don't use devres at all. The felix driver has the code structure in place for orderly mdiobus removal, so just replace devm_mdiobus_alloc_size() with the non-devres variant, and add manual free where necessary, to ensure that we don't let devres free a still-registered bus.

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix crash during module load unload test During purex packet handling the driver was incorrectly freeing a pre-allocated structure. Fix this by skipping that entry. System crashed with the following stack during a module unload test. Call Trace: sbitmap_init_node+0x7f/0x1e0 sbitmap_queue_init_node+0x24/0x150 blk_mq_init_bitmaps+0x3d/0xa0 blk_mq_init_tags+0x68/0x90 blk_mq_alloc_map_and_rqs+0x44/0x120 blk_mq_alloc_set_map_and_rqs+0x63/0x150 blk_mq_alloc_tag_set+0x11b/0x230 scsi_add_host_with_dma.cold+0x3f/0x245 qla2x00_probe_one+0xd5a/0x1b80 [qla2xxx] Call Trace with slub_debug and debug kernel: kasan_report_invalid_free+0x50/0x80 __kasan_slab_free+0x137/0x150 slab_free_freelist_hook+0xc6/0x190 kfree+0xe8/0x2e0 qla2x00_free_device+0x3bb/0x5d0 [qla2xxx] qla2x00_remove_one+0x668/0xcf0 [qla2xxx]

In the Linux kernel, the following vulnerability has been resolved: ice: Fix potential memory leak in ice_gnss_tty_write() The ice_gnss_tty_write() return directly if the write_buf alloc failed, leaking the cmd_buf. Fix by free cmd_buf if write_buf alloc failed.

In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: sof-nau8825: fix module alias overflow The maximum name length for a platform_device_id entry is 20 characters including the trailing NUL byte. The sof_nau8825.c file exceeds that, which causes an obscure error message: sound/soc/intel/boards/snd-soc-sof_nau8825.mod.c:35:45: error: illegal character encoding in string literal [-Werror,-Winvalid-source-encoding] MODULE_ALIAS("platform:adl_max98373_nau8825<U+0018><AA>"); ^~~~ include/linux/module.h:168:49: note: expanded from macro 'MODULE_ALIAS' ^~~~~~ include/linux/module.h:165:56: note: expanded from macro 'MODULE_INFO' ^~~~ include/linux/moduleparam.h:26:47: note: expanded from macro '__MODULE_INFO' = __MODULE_INFO_PREFIX __stringify(tag) "=" info I could not figure out how to make the module handling robust enough to handle this better, but as a quick fix, using slightly shorter names that are still unique avoids the build issue.

In the Linux kernel, the following vulnerability has been resolved: sctp: fix memory leak in sctp_stream_outq_migrate() When sctp_stream_outq_migrate() is called to release stream out resources, the memory pointed to by prio_head in stream out is not released. The memory leak information is as follows: unreferenced object 0xffff88801fe79f80 (size 64): comm "sctp_repo", pid 7957, jiffies 4294951704 (age 36.480s) hex dump (first 32 bytes): 80 9f e7 1f 80 88 ff ff 80 9f e7 1f 80 88 ff ff ................ 90 9f e7 1f 80 88 ff ff 90 9f e7 1f 80 88 ff ff ................ backtrace: [<ffffffff81b215c6>] kmalloc_trace+0x26/0x60 [<ffffffff88ae517c>] sctp_sched_prio_set+0x4cc/0x770 [<ffffffff88ad64f2>] sctp_stream_init_ext+0xd2/0x1b0 [<ffffffff88aa2604>] sctp_sendmsg_to_asoc+0x1614/0x1a30 [<ffffffff88ab7ff1>] sctp_sendmsg+0xda1/0x1ef0 [<ffffffff87f765ed>] inet_sendmsg+0x9d/0xe0 [<ffffffff8754b5b3>] sock_sendmsg+0xd3/0x120 [<ffffffff8755446a>] __sys_sendto+0x23a/0x340 [<ffffffff87554651>] __x64_sys_sendto+0xe1/0x1b0 [<ffffffff89978b49>] do_syscall_64+0x39/0xb0 [<ffffffff89a0008b>] entry_SYSCALL_64_after_hwframe+0x63/0xcd

In the Linux kernel, the following vulnerability has been resolved: staging: rtl8712: fix uninit-value in usb_read8() and friends When r8712_usbctrl_vendorreq() returns negative, 'data' in usb_read{8,16,32} will not be initialized. BUG: KMSAN: uninit-value in string_nocheck lib/vsprintf.c:643 [inline] BUG: KMSAN: uninit-value in string+0x4ec/0x6f0 lib/vsprintf.c:725 string_nocheck lib/vsprintf.c:643 [inline] string+0x4ec/0x6f0 lib/vsprintf.c:725 vsnprintf+0x2222/0x3650 lib/vsprintf.c:2806 va_format lib/vsprintf.c:1704 [inline] pointer+0x18e6/0x1f70 lib/vsprintf.c:2443 vsnprintf+0x1a9b/0x3650 lib/vsprintf.c:2810 vprintk_store+0x537/0x2150 kernel/printk/printk.c:2158 vprintk_emit+0x28b/0xab0 kernel/printk/printk.c:2256 dev_vprintk_emit+0x5ef/0x6d0 drivers/base/core.c:4604 dev_printk_emit+0x1dd/0x21f drivers/base/core.c:4615 __dev_printk+0x3be/0x440 drivers/base/core.c:4627 _dev_info+0x1ea/0x22f drivers/base/core.c:4673 r871xu_drv_init+0x1929/0x3070 drivers/staging/rtl8712/usb_intf.c:401 usb_probe_interface+0xf19/0x1600 drivers/usb/core/driver.c:396 really_probe+0x6c7/0x1350 drivers/base/dd.c:621 __driver_probe_device+0x3e9/0x530 drivers/base/dd.c:752 driver_probe_device drivers/base/dd.c:782 [inline] __device_attach_driver+0x79f/0x1120 drivers/base/dd.c:899 bus_for_each_drv+0x2d6/0x3f0 drivers/base/bus.c:427 __device_attach+0x593/0x8e0 drivers/base/dd.c:970 device_initial_probe+0x4a/0x60 drivers/base/dd.c:1017 bus_probe_device+0x17b/0x3e0 drivers/base/bus.c:487 device_add+0x1fff/0x26e0 drivers/base/core.c:3405 usb_set_configuration+0x37e9/0x3ed0 drivers/usb/core/message.c:2170 usb_generic_driver_probe+0x13c/0x300 drivers/usb/core/generic.c:238 usb_probe_device+0x309/0x570 drivers/usb/core/driver.c:293 really_probe+0x6c7/0x1350 drivers/base/dd.c:621 __driver_probe_device+0x3e9/0x530 drivers/base/dd.c:752 driver_probe_device drivers/base/dd.c:782 [inline] __device_attach_driver+0x79f/0x1120 drivers/base/dd.c:899 bus_for_each_drv+0x2d6/0x3f0 drivers/base/bus.c:427 __device_attach+0x593/0x8e0 drivers/base/dd.c:970 device_initial_probe+0x4a/0x60 drivers/base/dd.c:1017 bus_probe_device+0x17b/0x3e0 drivers/base/bus.c:487 device_add+0x1fff/0x26e0 drivers/base/core.c:3405 usb_new_device+0x1b91/0x2950 drivers/usb/core/hub.c:2566 hub_port_connect drivers/usb/core/hub.c:5363 [inline] hub_port_connect_change drivers/usb/core/hub.c:5507 [inline] port_event drivers/usb/core/hub.c:5665 [inline] hub_event+0x58e3/0x89e0 drivers/usb/core/hub.c:5747 process_one_work+0xdb6/0x1820 kernel/workqueue.c:2289 worker_thread+0x10d0/0x2240 kernel/workqueue.c:2436 kthread+0x3c7/0x500 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 Local variable data created at: usb_read8+0x5d/0x130 drivers/staging/rtl8712/usb_ops.c:33 r8712_read8+0xa5/0xd0 drivers/staging/rtl8712/rtl8712_io.c:29 KMSAN: uninit-value in r871xu_drv_init https://syzkaller.appspot.com/bug?id=3cd92b1d85428b128503bfa7a250294c9ae00bd8

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Call dc_stream_release for remove link enc assignment [Why] A porting error resulted in the stream assignment for the link being retained without being released - a memory leak. [How] Fix the porting error by adding back the dc_stream_release() intended as part of the original patch.

In the Linux kernel, the following vulnerability has been resolved: thermal/int340x_thermal: handle data_vault when the value is ZERO_SIZE_PTR In some case, the GDDV returns a package with a buffer which has zero length. It causes that kmemdup() returns ZERO_SIZE_PTR (0x10). Then the data_vault_read() got NULL point dereference problem when accessing the 0x10 value in data_vault. [ 71.024560] BUG: kernel NULL pointer dereference, address: 0000000000000010 This patch uses ZERO_OR_NULL_PTR() for checking ZERO_SIZE_PTR or NULL value in data_vault.

In the Linux kernel, the following vulnerability has been resolved: tty: synclink_gt: Fix null-pointer-dereference in slgt_clean() When the driver fails at alloc_hdlcdev(), and then we remove the driver module, we will get the following splat: [ 25.065966] general protection fault, probably for non-canonical address 0xdffffc0000000182: 0000 [#1] PREEMPT SMP KASAN PTI [ 25.066914] KASAN: null-ptr-deref in range [0x0000000000000c10-0x0000000000000c17] [ 25.069262] RIP: 0010:detach_hdlc_protocol+0x2a/0x3e0 [ 25.077709] Call Trace: [ 25.077924] <TASK> [ 25.078108] unregister_hdlc_device+0x16/0x30 [ 25.078481] slgt_cleanup+0x157/0x9f0 [synclink_gt] Fix this by checking whether the 'info->netdev' is a null pointer first.

In the Linux kernel, the following vulnerability has been resolved: drm: mxsfb: Fix NULL pointer dereference mxsfb should not ever dereference the NULL pointer which drm_atomic_get_new_bridge_state is allowed to return. Assume a fixed format instead.

In the Linux kernel, the following vulnerability has been resolved: ip_gre: test csum_start instead of transport header GRE with TUNNEL_CSUM will apply local checksum offload on CHECKSUM_PARTIAL packets. ipgre_xmit must validate csum_start after an optional skb_pull, else lco_csum may trigger an overflow. The original check was if (csum && skb_checksum_start(skb) < skb->data) return -EINVAL; This had false positives when skb_checksum_start is undefined: when ip_summed is not CHECKSUM_PARTIAL. A discussed refinement was straightforward if (csum && skb->ip_summed == CHECKSUM_PARTIAL && skb_checksum_start(skb) < skb->data) return -EINVAL; But was eventually revised more thoroughly: - restrict the check to the only branch where needed, in an uncommon GRE path that uses header_ops and calls skb_pull. - test skb_transport_header, which is set along with csum_start in skb_partial_csum_set in the normal header_ops datapath. Turns out skbs can arrive in this branch without the transport header set, e.g., through BPF redirection. Revise the check back to check csum_start directly, and only if CHECKSUM_PARTIAL. Do leave the check in the updated location. Check field regardless of whether TUNNEL_CSUM is configured.

In the Linux kernel, the following vulnerability has been resolved: ice: Fix crash by keep old cfg when update TCs more than queues There are problems if allocated queues less than Traffic Classes. Commit a632b2a4c920 ("ice: ethtool: Prohibit improper channel config for DCB") already disallow setting less queues than TCs. Another case is if we first set less queues, and later update more TCs config due to LLDP, ice_vsi_cfg_tc() will failed but left dirty num_txq/rxq and tc_cfg in vsi, that will cause invalid pointer access. [ 95.968089] ice 0000:3b:00.1: More TCs defined than queues/rings allocated. [ 95.968092] ice 0000:3b:00.1: Trying to use more Rx queues (8), than were allocated (1)! [ 95.968093] ice 0000:3b:00.1: Failed to config TC for VSI index: 0 [ 95.969621] general protection fault: 0000 [#1] SMP NOPTI [ 95.969705] CPU: 1 PID: 58405 Comm: lldpad Kdump: loaded Tainted: G U W O --------- -t - 4.18.0 #1 [ 95.969867] Hardware name: O.E.M/BC11SPSCB10, BIOS 8.23 12/30/2021 [ 95.969992] RIP: 0010:devm_kmalloc+0xa/0x60 [ 95.970052] Code: 5c ff ff ff 31 c0 5b 5d 41 5c c3 b8 f4 ff ff ff eb f4 0f 1f 40 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 89 d1 <8b> 97 60 02 00 00 48 8d 7e 18 48 39 f7 72 3f 55 89 ce 53 48 8b 4c [ 95.970344] RSP: 0018:ffffc9003f553888 EFLAGS: 00010206 [ 95.970425] RAX: dead000000000200 RBX: ffffea003c425b00 RCX: 00000000006080c0 [ 95.970536] RDX: 00000000006080c0 RSI: 0000000000000200 RDI: dead000000000200 [ 95.970648] RBP: dead000000000200 R08: 00000000000463c0 R09: ffff888ffa900000 [ 95.970760] R10: 0000000000000000 R11: 0000000000000002 R12: ffff888ff6b40100 [ 95.970870] R13: ffff888ff6a55018 R14: 0000000000000000 R15: ffff888ff6a55460 [ 95.970981] FS: 00007f51b7d24700(0000) GS:ffff88903ee80000(0000) knlGS:0000000000000000 [ 95.971108] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 95.971197] CR2: 00007fac5410d710 CR3: 0000000f2c1de002 CR4: 00000000007606e0 [ 95.971309] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 95.971419] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 95.971530] PKRU: 55555554 [ 95.971573] Call Trace: [ 95.971622] ice_setup_rx_ring+0x39/0x110 [ice] [ 95.971695] ice_vsi_setup_rx_rings+0x54/0x90 [ice] [ 95.971774] ice_vsi_open+0x25/0x120 [ice] [ 95.971843] ice_open_internal+0xb8/0x1f0 [ice] [ 95.971919] ice_ena_vsi+0x4f/0xd0 [ice] [ 95.971987] ice_dcb_ena_dis_vsi.constprop.5+0x29/0x90 [ice] [ 95.972082] ice_pf_dcb_cfg+0x29a/0x380 [ice] [ 95.972154] ice_dcbnl_setets+0x174/0x1b0 [ice] [ 95.972220] dcbnl_ieee_set+0x89/0x230 [ 95.972279] ? dcbnl_ieee_del+0x150/0x150 [ 95.972341] dcb_doit+0x124/0x1b0 [ 95.972392] rtnetlink_rcv_msg+0x243/0x2f0 [ 95.972457] ? dcb_doit+0x14d/0x1b0 [ 95.972510] ? __kmalloc_node_track_caller+0x1d3/0x280 [ 95.972591] ? rtnl_calcit.isra.31+0x100/0x100 [ 95.972661] netlink_rcv_skb+0xcf/0xf0 [ 95.972720] netlink_unicast+0x16d/0x220 [ 95.972781] netlink_sendmsg+0x2ba/0x3a0 [ 95.975891] sock_sendmsg+0x4c/0x50 [ 95.979032] ___sys_sendmsg+0x2e4/0x300 [ 95.982147] ? kmem_cache_alloc+0x13e/0x190 [ 95.985242] ? __wake_up_common_lock+0x79/0x90 [ 95.988338] ? __check_object_size+0xac/0x1b0 [ 95.991440] ? _copy_to_user+0x22/0x30 [ 95.994539] ? move_addr_to_user+0xbb/0xd0 [ 95.997619] ? __sys_sendmsg+0x53/0x80 [ 96.000664] __sys_sendmsg+0x53/0x80 [ 96.003747] do_syscall_64+0x5b/0x1d0 [ 96.006862] entry_SYSCALL_64_after_hwframe+0x65/0xca Only update num_txq/rxq when passed check, and restore tc_cfg if setup queue map failed.

In the Linux kernel, the following vulnerability has been resolved: hwmon: (coretemp) fix pci device refcount leak in nv1a_ram_new() As comment of pci_get_domain_bus_and_slot() says, it returns a pci device with refcount increment, when finish using it, the caller must decrement the reference count by calling pci_dev_put(). So call it after using to avoid refcount leak.

In the Linux kernel, the following vulnerability has been resolved: net: preserve skb_end_offset() in skb_unclone_keeptruesize() syzbot found another way to trigger the infamous WARN_ON_ONCE(delta < len) in skb_try_coalesce() [1] I was able to root cause the issue to kfence. When kfence is in action, the following assertion is no longer true: int size = xxxx; void *ptr1 = kmalloc(size, gfp); void *ptr2 = kmalloc(size, gfp); if (ptr1 && ptr2) ASSERT(ksize(ptr1) == ksize(ptr2)); We attempted to fix these issues in the blamed commits, but forgot that TCP was possibly shifting data after skb_unclone_keeptruesize() has been used, notably from tcp_retrans_try_collapse(). So we not only need to keep same skb->truesize value, we also need to make sure TCP wont fill new tailroom that pskb_expand_head() was able to get from a addr = kmalloc(...) followed by ksize(addr) Split skb_unclone_keeptruesize() into two parts: 1) Inline skb_unclone_keeptruesize() for the common case, when skb is not cloned. 2) Out of line __skb_unclone_keeptruesize() for the 'slow path'. WARNING: CPU: 1 PID: 6490 at net/core/skbuff.c:5295 skb_try_coalesce+0x1235/0x1560 net/core/skbuff.c:5295 Modules linked in: CPU: 1 PID: 6490 Comm: syz-executor161 Not tainted 5.17.0-rc4-syzkaller-00229-g4f12b742eb2b #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:skb_try_coalesce+0x1235/0x1560 net/core/skbuff.c:5295 Code: bf 01 00 00 00 0f b7 c0 89 c6 89 44 24 20 e8 62 24 4e fa 8b 44 24 20 83 e8 01 0f 85 e5 f0 ff ff e9 87 f4 ff ff e8 cb 20 4e fa <0f> 0b e9 06 f9 ff ff e8 af b2 95 fa e9 69 f0 ff ff e8 95 b2 95 fa RSP: 0018:ffffc900063af268 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 00000000ffffffd5 RCX: 0000000000000000 RDX: ffff88806fc05700 RSI: ffffffff872abd55 RDI: 0000000000000003 RBP: ffff88806e675500 R08: 00000000ffffffd5 R09: 0000000000000000 R10: ffffffff872ab659 R11: 0000000000000000 R12: ffff88806dd554e8 R13: ffff88806dd9bac0 R14: ffff88806dd9a2c0 R15: 0000000000000155 FS: 00007f18014f9700(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020002000 CR3: 000000006be7a000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> tcp_try_coalesce net/ipv4/tcp_input.c:4651 [inline] tcp_try_coalesce+0x393/0x920 net/ipv4/tcp_input.c:4630 tcp_queue_rcv+0x8a/0x6e0 net/ipv4/tcp_input.c:4914 tcp_data_queue+0x11fd/0x4bb0 net/ipv4/tcp_input.c:5025 tcp_rcv_established+0x81e/0x1ff0 net/ipv4/tcp_input.c:5947 tcp_v4_do_rcv+0x65e/0x980 net/ipv4/tcp_ipv4.c:1719 sk_backlog_rcv include/net/sock.h:1037 [inline] __release_sock+0x134/0x3b0 net/core/sock.c:2779 release_sock+0x54/0x1b0 net/core/sock.c:3311 sk_wait_data+0x177/0x450 net/core/sock.c:2821 tcp_recvmsg_locked+0xe28/0x1fd0 net/ipv4/tcp.c:2457 tcp_recvmsg+0x137/0x610 net/ipv4/tcp.c:2572 inet_recvmsg+0x11b/0x5e0 net/ipv4/af_inet.c:850 sock_recvmsg_nosec net/socket.c:948 [inline] sock_recvmsg net/socket.c:966 [inline] sock_recvmsg net/socket.c:962 [inline] ____sys_recvmsg+0x2c4/0x600 net/socket.c:2632 ___sys_recvmsg+0x127/0x200 net/socket.c:2674 __sys_recvmsg+0xe2/0x1a0 net/socket.c:2704 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae

In the Linux kernel, the following vulnerability has been resolved: net: dsa: bcm_sf2: don't use devres for mdiobus As explained in commits: 74b6d7d13307 ("net: dsa: realtek: register the MDIO bus under devres") 5135e96a3dd2 ("net: dsa: don't allocate the slave_mii_bus using devres") mdiobus_free() will panic when called from devm_mdiobus_free() <- devres_release_all() <- __device_release_driver(), and that mdiobus was not previously unregistered. The Starfighter 2 is a platform device, so the initial set of constraints that I thought would cause this (I2C or SPI buses which call ->remove on ->shutdown) do not apply. But there is one more which applies here. If the DSA master itself is on a bus that calls ->remove from ->shutdown (like dpaa2-eth, which is on the fsl-mc bus), there is a device link between the switch and the DSA master, and device_links_unbind_consumers() will unbind the bcm_sf2 switch driver on shutdown. So the same treatment must be applied to all DSA switch drivers, which is: either use devres for both the mdiobus allocation and registration, or don't use devres at all. The bcm_sf2 driver has the code structure in place for orderly mdiobus removal, so just replace devm_mdiobus_alloc() with the non-devres variant, and add manual free where necessary, to ensure that we don't let devres free a still-registered bus.

In the Linux kernel, the following vulnerability has been resolved: scsi: pm8001: Fix memory leak in pm8001_chip_fw_flash_update_req() In pm8001_chip_fw_flash_update_build(), if pm8001_chip_fw_flash_update_build() fails, the struct fw_control_ex allocated must be freed.