In the Linux kernel, the following vulnerability has been resolved: nfsd: clear acl_access/acl_default after releasing them If getting acl_default fails, acl_access and acl_default will be released simultaneously. However, acl_access will still retain a pointer pointing to the released posix_acl, which will trigger a WARNING in nfs3svc_release_getacl like this: ------------[ cut here ]------------ refcount_t: underflow; use-after-free. WARNING: CPU: 26 PID: 3199 at lib/refcount.c:28 refcount_warn_saturate+0xb5/0x170 Modules linked in: CPU: 26 UID: 0 PID: 3199 Comm: nfsd Not tainted 6.12.0-rc6-00079-g04ae226af01f-dirty #8 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014 RIP: 0010:refcount_warn_saturate+0xb5/0x170 Code: cc cc 0f b6 1d b3 20 a5 03 80 fb 01 0f 87 65 48 d8 00 83 e3 01 75 e4 48 c7 c7 c0 3b 9b 85 c6 05 97 20 a5 03 01 e8 fb 3e 30 ff <0f> 0b eb cd 0f b6 1d 8a3 RSP: 0018:ffffc90008637cd8 EFLAGS: 00010282 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff83904fde RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffff88871ed36380 RBP: ffff888158beeb40 R08: 0000000000000001 R09: fffff520010c6f56 R10: ffffc90008637ab7 R11: 0000000000000001 R12: 0000000000000001 R13: ffff888140e77400 R14: ffff888140e77408 R15: ffffffff858b42c0 FS: 0000000000000000(0000) GS:ffff88871ed00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000562384d32158 CR3: 000000055cc6a000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? refcount_warn_saturate+0xb5/0x170 ? __warn+0xa5/0x140 ? refcount_warn_saturate+0xb5/0x170 ? report_bug+0x1b1/0x1e0 ? handle_bug+0x53/0xa0 ? exc_invalid_op+0x17/0x40 ? asm_exc_invalid_op+0x1a/0x20 ? tick_nohz_tick_stopped+0x1e/0x40 ? refcount_warn_saturate+0xb5/0x170 ? refcount_warn_saturate+0xb5/0x170 nfs3svc_release_getacl+0xc9/0xe0 svc_process_common+0x5db/0xb60 ? __pfx_svc_process_common+0x10/0x10 ? __rcu_read_unlock+0x69/0xa0 ? __pfx_nfsd_dispatch+0x10/0x10 ? svc_xprt_received+0xa1/0x120 ? xdr_init_decode+0x11d/0x190 svc_process+0x2a7/0x330 svc_handle_xprt+0x69d/0x940 svc_recv+0x180/0x2d0 nfsd+0x168/0x200 ? __pfx_nfsd+0x10/0x10 kthread+0x1a2/0x1e0 ? kthread+0xf4/0x1e0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x34/0x60 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Kernel panic - not syncing: kernel: panic_on_warn set ... Clear acl_access/acl_default after posix_acl_release is called to prevent UAF from being triggered.

In the Linux kernel, the following vulnerability has been resolved: mm: zswap: properly synchronize freeing resources during CPU hotunplug In zswap_compress() and zswap_decompress(), the per-CPU acomp_ctx of the current CPU at the beginning of the operation is retrieved and used throughout. However, since neither preemption nor migration are disabled, it is possible that the operation continues on a different CPU. If the original CPU is hotunplugged while the acomp_ctx is still in use, we run into a UAF bug as some of the resources attached to the acomp_ctx are freed during hotunplug in zswap_cpu_comp_dead() (i.e. acomp_ctx.buffer, acomp_ctx.req, or acomp_ctx.acomp). The problem was introduced in commit 1ec3b5fe6eec ("mm/zswap: move to use crypto_acomp API for hardware acceleration") when the switch to the crypto_acomp API was made. Prior to that, the per-CPU crypto_comp was retrieved using get_cpu_ptr() which disables preemption and makes sure the CPU cannot go away from under us. Preemption cannot be disabled with the crypto_acomp API as a sleepable context is needed. Use the acomp_ctx.mutex to synchronize CPU hotplug callbacks allocating and freeing resources with compression/decompression paths. Make sure that acomp_ctx.req is NULL when the resources are freed. In the compression/decompression paths, check if acomp_ctx.req is NULL after acquiring the mutex (meaning the CPU was offlined) and retry on the new CPU. The initialization of acomp_ctx.mutex is moved from the CPU hotplug callback to the pool initialization where it belongs (where the mutex is allocated). In addition to adding clarity, this makes sure that CPU hotplug cannot reinitialize a mutex that is already locked by compression/decompression. Previously a fix was attempted by holding cpus_read_lock() [1]. This would have caused a potential deadlock as it is possible for code already holding the lock to fall into reclaim and enter zswap (causing a deadlock). A fix was also attempted using SRCU for synchronization, but Johannes pointed out that synchronize_srcu() cannot be used in CPU hotplug notifiers [2]. Alternative fixes that were considered/attempted and could have worked: - Refcounting the per-CPU acomp_ctx. This involves complexity in handling the race between the refcount dropping to zero in zswap_[de]compress() and the refcount being re-initialized when the CPU is onlined. - Disabling migration before getting the per-CPU acomp_ctx [3], but that's discouraged and is a much bigger hammer than needed, and could result in subtle performance issues. [1]https://lkml.kernel.org/20241219212437.2714151-1-yosryahmed@google.com/ [2]https://lkml.kernel.org/20250107074724.1756696-2-yosryahmed@google.com/ [3]https://lkml.kernel.org/20250107222236.2715883-2-yosryahmed@google.com/ [yosryahmed@google.com: remove comment]

In the Linux kernel, the following vulnerability has been resolved: padata: fix UAF in padata_reorder A bug was found when run ltp test: BUG: KASAN: slab-use-after-free in padata_find_next+0x29/0x1a0 Read of size 4 at addr ffff88bbfe003524 by task kworker/u113:2/3039206 CPU: 0 PID: 3039206 Comm: kworker/u113:2 Kdump: loaded Not tainted 6.6.0+ Workqueue: pdecrypt_parallel padata_parallel_worker Call Trace: <TASK> dump_stack_lvl+0x32/0x50 print_address_description.constprop.0+0x6b/0x3d0 print_report+0xdd/0x2c0 kasan_report+0xa5/0xd0 padata_find_next+0x29/0x1a0 padata_reorder+0x131/0x220 padata_parallel_worker+0x3d/0xc0 process_one_work+0x2ec/0x5a0 If 'mdelay(10)' is added before calling 'padata_find_next' in the 'padata_reorder' function, this issue could be reproduced easily with ltp test (pcrypt_aead01). This can be explained as bellow: pcrypt_aead_encrypt ... padata_do_parallel refcount_inc(&pd->refcnt); // add refcnt ... padata_do_serial padata_reorder // pd while (1) { padata_find_next(pd, true); // using pd queue_work_on ... padata_serial_worker crypto_del_alg padata_put_pd_cnt // sub refcnt padata_free_shell padata_put_pd(ps->pd); // pd is freed // loop again, but pd is freed // call padata_find_next, UAF } In the padata_reorder function, when it loops in 'while', if the alg is deleted, the refcnt may be decreased to 0 before entering 'padata_find_next', which leads to UAF. As mentioned in [1], do_serial is supposed to be called with BHs disabled and always happen under RCU protection, to address this issue, add synchronize_rcu() in 'padata_free_shell' wait for all _do_serial calls to finish. [1] https://lore.kernel.org/all/20221028160401.cccypv4euxikusiq@parnassus.localdomain/ [2] https://lore.kernel.org/linux-kernel/jfjz5d7zwbytztackem7ibzalm5lnxldi2eofeiczqmqs2m7o6@fq426cwnjtkm/

In the Linux kernel, the following vulnerability has been resolved: net: davicom: fix UAF in dm9000_drv_remove dm is netdev private data and it cannot be used after free_netdev() call. Using dm after free_netdev() can cause UAF bug. Fix it by moving free_netdev() at the end of the function. This is similar to the issue fixed in commit ad297cd2db89 ("net: qcom/emac: fix UAF in emac_remove"). This bug is detected by our static analysis tool.

In the Linux kernel, the following vulnerability has been resolved: nbd: don't allow reconnect after disconnect Following process can cause nbd_config UAF: 1) grab nbd_config temporarily; 2) nbd_genl_disconnect() flush all recv_work() and release the initial reference: nbd_genl_disconnect nbd_disconnect_and_put nbd_disconnect flush_workqueue(nbd->recv_workq) if (test_and_clear_bit(NBD_RT_HAS_CONFIG_REF, ...)) nbd_config_put -> due to step 1), reference is still not zero 3) nbd_genl_reconfigure() queue recv_work() again; nbd_genl_reconfigure config = nbd_get_config_unlocked(nbd) if (!config) -> succeed if (!test_bit(NBD_RT_BOUND, ...)) -> succeed nbd_reconnect_socket queue_work(nbd->recv_workq, &args->work) 4) step 1) release the reference; 5) Finially, recv_work() will trigger UAF: recv_work nbd_config_put(nbd) -> nbd_config is freed atomic_dec(&config->recv_threads) -> UAF Fix the problem by clearing NBD_RT_BOUND in nbd_genl_disconnect(), so that nbd_genl_reconfigure() will fail.

In the Linux kernel, the following vulnerability has been resolved: geneve: Fix use-after-free in geneve_find_dev(). syzkaller reported a use-after-free in geneve_find_dev() [0] without repro. geneve_configure() links struct geneve_dev.next to net_generic(net, geneve_net_id)->geneve_list. The net here could differ from dev_net(dev) if IFLA_NET_NS_PID, IFLA_NET_NS_FD, or IFLA_TARGET_NETNSID is set. When dev_net(dev) is dismantled, geneve_exit_batch_rtnl() finally calls unregister_netdevice_queue() for each dev in the netns, and later the dev is freed. However, its geneve_dev.next is still linked to the backend UDP socket netns. Then, use-after-free will occur when another geneve dev is created in the netns. Let's call geneve_dellink() instead in geneve_destroy_tunnels(). [0]: BUG: KASAN: slab-use-after-free in geneve_find_dev drivers/net/geneve.c:1295 [inline] BUG: KASAN: slab-use-after-free in geneve_configure+0x234/0x858 drivers/net/geneve.c:1343 Read of size 2 at addr ffff000054d6ee24 by task syz.1.4029/13441 CPU: 1 UID: 0 PID: 13441 Comm: syz.1.4029 Not tainted 6.13.0-g0ad9617c78ac #24 dc35ca22c79fb82e8e7bc5c9c9adafea898b1e3d Hardware name: linux,dummy-virt (DT) Call trace: show_stack+0x38/0x50 arch/arm64/kernel/stacktrace.c:466 (C) __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0xbc/0x108 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x16c/0x6f0 mm/kasan/report.c:489 kasan_report+0xc0/0x120 mm/kasan/report.c:602 __asan_report_load2_noabort+0x20/0x30 mm/kasan/report_generic.c:379 geneve_find_dev drivers/net/geneve.c:1295 [inline] geneve_configure+0x234/0x858 drivers/net/geneve.c:1343 geneve_newlink+0xb8/0x128 drivers/net/geneve.c:1634 rtnl_newlink_create+0x23c/0x868 net/core/rtnetlink.c:3795 __rtnl_newlink net/core/rtnetlink.c:3906 [inline] rtnl_newlink+0x1054/0x1630 net/core/rtnetlink.c:4021 rtnetlink_rcv_msg+0x61c/0x918 net/core/rtnetlink.c:6911 netlink_rcv_skb+0x1dc/0x398 net/netlink/af_netlink.c:2543 rtnetlink_rcv+0x34/0x50 net/core/rtnetlink.c:6938 netlink_unicast_kernel net/netlink/af_netlink.c:1322 [inline] netlink_unicast+0x618/0x838 net/netlink/af_netlink.c:1348 netlink_sendmsg+0x5fc/0x8b0 net/netlink/af_netlink.c:1892 sock_sendmsg_nosec net/socket.c:713 [inline] __sock_sendmsg net/socket.c:728 [inline] ____sys_sendmsg+0x410/0x6f8 net/socket.c:2568 ___sys_sendmsg+0x178/0x1d8 net/socket.c:2622 __sys_sendmsg net/socket.c:2654 [inline] __do_sys_sendmsg net/socket.c:2659 [inline] __se_sys_sendmsg net/socket.c:2657 [inline] __arm64_sys_sendmsg+0x12c/0x1c8 net/socket.c:2657 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x90/0x278 arch/arm64/kernel/syscall.c:49 el0_svc_common+0x13c/0x250 arch/arm64/kernel/syscall.c:132 do_el0_svc+0x54/0x70 arch/arm64/kernel/syscall.c:151 el0_svc+0x4c/0xa8 arch/arm64/kernel/entry-common.c:744 el0t_64_sync_handler+0x78/0x108 arch/arm64/kernel/entry-common.c:762 el0t_64_sync+0x198/0x1a0 arch/arm64/kernel/entry.S:600 Allocated by task 13247: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x30/0x68 mm/kasan/common.c:68 kasan_save_alloc_info+0x44/0x58 mm/kasan/generic.c:568 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0x84/0xa0 mm/kasan/common.c:394 kasan_kmalloc include/linux/kasan.h:260 [inline] __do_kmalloc_node mm/slub.c:4298 [inline] __kmalloc_node_noprof+0x2a0/0x560 mm/slub.c:4304 __kvmalloc_node_noprof+0x9c/0x230 mm/util.c:645 alloc_netdev_mqs+0xb8/0x11a0 net/core/dev.c:11470 rtnl_create_link+0x2b8/0xb50 net/core/rtnetlink.c:3604 rtnl_newlink_create+0x19c/0x868 net/core/rtnetlink.c:3780 __rtnl_newlink net/core/rtnetlink.c:3906 [inline] rtnl_newlink+0x1054/0x1630 net/core/rtnetlink.c:4021 rtnetlink_rcv_msg+0x61c/0x918 net/core/rtnetlink.c:6911 netlink_rcv_skb+0x1dc/0x398 net/netlink/af_netlink.c:2543 rtnetlink_rcv+0x34/0x50 net/core/rtnetlink.c:6938 netlink_unicast_kernel net/netlink/af_n ---truncated---

In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Fix use-after free in init error and remove paths devm_blk_crypto_profile_init() registers a cleanup handler to run when the associated (platform-) device is being released. For UFS, the crypto private data and pointers are stored as part of the ufs_hba's data structure 'struct ufs_hba::crypto_profile'. This structure is allocated as part of the underlying ufshcd and therefore Scsi_host allocation. During driver release or during error handling in ufshcd_pltfrm_init(), this structure is released as part of ufshcd_dealloc_host() before the (platform-) device associated with the crypto call above is released. Once this device is released, the crypto cleanup code will run, using the just-released 'struct ufs_hba::crypto_profile'. This causes a use-after-free situation: Call trace: kfree+0x60/0x2d8 (P) kvfree+0x44/0x60 blk_crypto_profile_destroy_callback+0x28/0x70 devm_action_release+0x1c/0x30 release_nodes+0x6c/0x108 devres_release_all+0x98/0x100 device_unbind_cleanup+0x20/0x70 really_probe+0x218/0x2d0 In other words, the initialisation code flow is: platform-device probe ufshcd_pltfrm_init() ufshcd_alloc_host() scsi_host_alloc() allocation of struct ufs_hba creation of scsi-host devices devm_blk_crypto_profile_init() devm registration of cleanup handler using platform-device and during error handling of ufshcd_pltfrm_init() or during driver removal: ufshcd_dealloc_host() scsi_host_put() put_device(scsi-host) release of struct ufs_hba put_device(platform-device) crypto cleanup handler To fix this use-after free, change ufshcd_alloc_host() to register a devres action to automatically cleanup the underlying SCSI device on ufshcd destruction, without requiring explicit calls to ufshcd_dealloc_host(). This way: * the crypto profile and all other ufs_hba-owned resources are destroyed before SCSI (as they've been registered after) * a memleak is plugged in tc-dwc-g210-pci.c remove() as a side-effect * EXPORT_SYMBOL_GPL(ufshcd_dealloc_host) can be removed fully as it's not needed anymore * no future drivers using ufshcd_alloc_host() could ever forget adding the cleanup

In the Linux kernel, the following vulnerability has been resolved: block, bfq: fix waker_bfqq UAF after bfq_split_bfqq() Our syzkaller report a following UAF for v6.6: BUG: KASAN: slab-use-after-free in bfq_init_rq+0x175d/0x17a0 block/bfq-iosched.c:6958 Read of size 8 at addr ffff8881b57147d8 by task fsstress/232726 CPU: 2 PID: 232726 Comm: fsstress Not tainted 6.6.0-g3629d1885222 #39 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x91/0xf0 lib/dump_stack.c:106 print_address_description.constprop.0+0x66/0x300 mm/kasan/report.c:364 print_report+0x3e/0x70 mm/kasan/report.c:475 kasan_report+0xb8/0xf0 mm/kasan/report.c:588 hlist_add_head include/linux/list.h:1023 [inline] bfq_init_rq+0x175d/0x17a0 block/bfq-iosched.c:6958 bfq_insert_request.isra.0+0xe8/0xa20 block/bfq-iosched.c:6271 bfq_insert_requests+0x27f/0x390 block/bfq-iosched.c:6323 blk_mq_insert_request+0x290/0x8f0 block/blk-mq.c:2660 blk_mq_submit_bio+0x1021/0x15e0 block/blk-mq.c:3143 __submit_bio+0xa0/0x6b0 block/blk-core.c:639 __submit_bio_noacct_mq block/blk-core.c:718 [inline] submit_bio_noacct_nocheck+0x5b7/0x810 block/blk-core.c:747 submit_bio_noacct+0xca0/0x1990 block/blk-core.c:847 __ext4_read_bh fs/ext4/super.c:205 [inline] ext4_read_bh+0x15e/0x2e0 fs/ext4/super.c:230 __read_extent_tree_block+0x304/0x6f0 fs/ext4/extents.c:567 ext4_find_extent+0x479/0xd20 fs/ext4/extents.c:947 ext4_ext_map_blocks+0x1a3/0x2680 fs/ext4/extents.c:4182 ext4_map_blocks+0x929/0x15a0 fs/ext4/inode.c:660 ext4_iomap_begin_report+0x298/0x480 fs/ext4/inode.c:3569 iomap_iter+0x3dd/0x1010 fs/iomap/iter.c:91 iomap_fiemap+0x1f4/0x360 fs/iomap/fiemap.c:80 ext4_fiemap+0x181/0x210 fs/ext4/extents.c:5051 ioctl_fiemap.isra.0+0x1b4/0x290 fs/ioctl.c:220 do_vfs_ioctl+0x31c/0x11a0 fs/ioctl.c:811 __do_sys_ioctl fs/ioctl.c:869 [inline] __se_sys_ioctl+0xae/0x190 fs/ioctl.c:857 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x70/0x120 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x78/0xe2 Allocated by task 232719: kasan_save_stack+0x22/0x50 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 __kasan_slab_alloc+0x87/0x90 mm/kasan/common.c:328 kasan_slab_alloc include/linux/kasan.h:188 [inline] slab_post_alloc_hook mm/slab.h:768 [inline] slab_alloc_node mm/slub.c:3492 [inline] kmem_cache_alloc_node+0x1b8/0x6f0 mm/slub.c:3537 bfq_get_queue+0x215/0x1f00 block/bfq-iosched.c:5869 bfq_get_bfqq_handle_split+0x167/0x5f0 block/bfq-iosched.c:6776 bfq_init_rq+0x13a4/0x17a0 block/bfq-iosched.c:6938 bfq_insert_request.isra.0+0xe8/0xa20 block/bfq-iosched.c:6271 bfq_insert_requests+0x27f/0x390 block/bfq-iosched.c:6323 blk_mq_insert_request+0x290/0x8f0 block/blk-mq.c:2660 blk_mq_submit_bio+0x1021/0x15e0 block/blk-mq.c:3143 __submit_bio+0xa0/0x6b0 block/blk-core.c:639 __submit_bio_noacct_mq block/blk-core.c:718 [inline] submit_bio_noacct_nocheck+0x5b7/0x810 block/blk-core.c:747 submit_bio_noacct+0xca0/0x1990 block/blk-core.c:847 __ext4_read_bh fs/ext4/super.c:205 [inline] ext4_read_bh_nowait+0x15a/0x240 fs/ext4/super.c:217 ext4_read_bh_lock+0xac/0xd0 fs/ext4/super.c:242 ext4_bread_batch+0x268/0x500 fs/ext4/inode.c:958 __ext4_find_entry+0x448/0x10f0 fs/ext4/namei.c:1671 ext4_lookup_entry fs/ext4/namei.c:1774 [inline] ext4_lookup.part.0+0x359/0x6f0 fs/ext4/namei.c:1842 ext4_lookup+0x72/0x90 fs/ext4/namei.c:1839 __lookup_slow+0x257/0x480 fs/namei.c:1696 lookup_slow fs/namei.c:1713 [inline] walk_component+0x454/0x5c0 fs/namei.c:2004 link_path_walk.part.0+0x773/0xda0 fs/namei.c:2331 link_path_walk fs/namei.c:3826 [inline] path_openat+0x1b9/0x520 fs/namei.c:3826 do_filp_open+0x1b7/0x400 fs/namei.c:3857 do_sys_openat2+0x5dc/0x6e0 fs/open.c:1428 do_sys_open fs/open.c:1443 [inline] __do_sys_openat fs/open.c:1459 [inline] __se_sys_openat fs/open.c:1454 [inline] __x64_sys_openat+0x148/0x200 fs/open.c:1454 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_6 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: ndisc: extend RCU protection in ndisc_send_skb() ndisc_send_skb() can be called without RTNL or RCU held. Acquire rcu_read_lock() earlier, so that we can use dev_net_rcu() and avoid a potential UAF.

In the Linux kernel, the following vulnerability has been resolved: workqueue: Put the pwq after detaching the rescuer from the pool The commit 68f83057b913("workqueue: Reap workers via kthread_stop() and remove detach_completion") adds code to reap the normal workers but mistakenly does not handle the rescuer and also removes the code waiting for the rescuer in put_unbound_pool(), which caused a use-after-free bug reported by Cheung Wall. To avoid the use-after-free bug, the pool’s reference must be held until the detachment is complete. Therefore, move the code that puts the pwq after detaching the rescuer from the pool.

In the Linux kernel, the following vulnerability has been resolved: s390/ism: add release function for struct device According to device_release() in /drivers/base/core.c, a device without a release function is a broken device and must be fixed. The current code directly frees the device after calling device_add() without waiting for other kernel parts to release their references. Thus, a reference could still be held to a struct device, e.g., by sysfs, leading to potential use-after-free issues if a proper release function is not set.

In the Linux kernel, the following vulnerability has been resolved: neighbour: use RCU protection in __neigh_notify() __neigh_notify() can be called without RTNL or RCU protection. Use RCU protection to avoid potential UAF.

In the Linux kernel, the following vulnerability has been resolved: vsock: Keep the binding until socket destruction Preserve sockets bindings; this includes both resulting from an explicit bind() and those implicitly bound through autobind during connect(). Prevents socket unbinding during a transport reassignment, which fixes a use-after-free: 1. vsock_create() (refcnt=1) calls vsock_insert_unbound() (refcnt=2) 2. transport->release() calls vsock_remove_bound() without checking if sk was bound and moved to bound list (refcnt=1) 3. vsock_bind() assumes sk is in unbound list and before __vsock_insert_bound(vsock_bound_sockets()) calls __vsock_remove_bound() which does: list_del_init(&vsk->bound_table); // nop sock_put(&vsk->sk); // refcnt=0 BUG: KASAN: slab-use-after-free in __vsock_bind+0x62e/0x730 Read of size 4 at addr ffff88816b46a74c by task a.out/2057 dump_stack_lvl+0x68/0x90 print_report+0x174/0x4f6 kasan_report+0xb9/0x190 __vsock_bind+0x62e/0x730 vsock_bind+0x97/0xe0 __sys_bind+0x154/0x1f0 __x64_sys_bind+0x6e/0xb0 do_syscall_64+0x93/0x1b0 entry_SYSCALL_64_after_hwframe+0x76/0x7e Allocated by task 2057: kasan_save_stack+0x1e/0x40 kasan_save_track+0x10/0x30 __kasan_slab_alloc+0x85/0x90 kmem_cache_alloc_noprof+0x131/0x450 sk_prot_alloc+0x5b/0x220 sk_alloc+0x2c/0x870 __vsock_create.constprop.0+0x2e/0xb60 vsock_create+0xe4/0x420 __sock_create+0x241/0x650 __sys_socket+0xf2/0x1a0 __x64_sys_socket+0x6e/0xb0 do_syscall_64+0x93/0x1b0 entry_SYSCALL_64_after_hwframe+0x76/0x7e Freed by task 2057: kasan_save_stack+0x1e/0x40 kasan_save_track+0x10/0x30 kasan_save_free_info+0x37/0x60 __kasan_slab_free+0x4b/0x70 kmem_cache_free+0x1a1/0x590 __sk_destruct+0x388/0x5a0 __vsock_bind+0x5e1/0x730 vsock_bind+0x97/0xe0 __sys_bind+0x154/0x1f0 __x64_sys_bind+0x6e/0xb0 do_syscall_64+0x93/0x1b0 entry_SYSCALL_64_after_hwframe+0x76/0x7e refcount_t: addition on 0; use-after-free. WARNING: CPU: 7 PID: 2057 at lib/refcount.c:25 refcount_warn_saturate+0xce/0x150 RIP: 0010:refcount_warn_saturate+0xce/0x150 __vsock_bind+0x66d/0x730 vsock_bind+0x97/0xe0 __sys_bind+0x154/0x1f0 __x64_sys_bind+0x6e/0xb0 do_syscall_64+0x93/0x1b0 entry_SYSCALL_64_after_hwframe+0x76/0x7e refcount_t: underflow; use-after-free. WARNING: CPU: 7 PID: 2057 at lib/refcount.c:28 refcount_warn_saturate+0xee/0x150 RIP: 0010:refcount_warn_saturate+0xee/0x150 vsock_remove_bound+0x187/0x1e0 __vsock_release+0x383/0x4a0 vsock_release+0x90/0x120 __sock_release+0xa3/0x250 sock_close+0x14/0x20 __fput+0x359/0xa80 task_work_run+0x107/0x1d0 do_exit+0x847/0x2560 do_group_exit+0xb8/0x250 __x64_sys_exit_group+0x3a/0x50 x64_sys_call+0xfec/0x14f0 do_syscall_64+0x93/0x1b0 entry_SYSCALL_64_after_hwframe+0x76/0x7e

In the Linux kernel, the following vulnerability has been resolved: HID: corsair-void: Add missing delayed work cancel for headset status The cancel_delayed_work_sync() call was missed, causing a use-after-free in corsair_void_remove().

A flaw was found in the fixed buffer registration code for io_uring (io_sqe_buffer_register in io_uring/rsrc.c) in the Linux kernel that allows out-of-bounds access to physical memory beyond the end of the buffer. This flaw enables full local privilege escalation.

A flaw was found in the Nosy driver in the Linux kernel. This issue allows a device to be inserted twice into a doubly-linked list, leading to a use-after-free when one of these devices is removed. The highest threat from this vulnerability is to confidentiality, integrity, as well as system availability. Versions before kernel 5.12-rc6 are affected

In the Linux kernel, the following vulnerability has been resolved: gpio: virtuser: fix UAF in configfs release path The gpio-virtuser configfs release path uses guard(mutex) to protect the device structure. However, the device is freed before the guard cleanup runs, causing mutex_unlock() to operate on freed memory. Specifically, gpio_virtuser_device_config_group_release() destroys the mutex and frees the device while still inside the guard(mutex) scope. When the function returns, the guard cleanup invokes mutex_unlock(&dev->lock), resulting in a slab use-after-free. Limit the mutex lifetime by using a scoped_guard() only around the activation check, so that the lock is released before mutex_destroy() and kfree() are called.

In the Linux kernel, the following vulnerability has been resolved: net: inet6: do not leave a dangling sk pointer in inet6_create() sock_init_data() attaches the allocated sk pointer to the provided sock object. If inet6_create() fails later, the sk object is released, but the sock object retains the dangling sk pointer, which may cause use-after-free later. Clear the sock sk pointer on error.

In the Linux kernel, the following vulnerability has been resolved: linkwatch: use __dev_put() in callers to prevent UAF After linkwatch_do_dev() calls __dev_put() to release the linkwatch reference, the device refcount may drop to 1. At this point, netdev_run_todo() can proceed (since linkwatch_sync_dev() sees an empty list and returns without blocking), wait for the refcount to become 1 via netdev_wait_allrefs_any(), and then free the device via kobject_put(). This creates a use-after-free when __linkwatch_run_queue() tries to call netdev_unlock_ops() on the already-freed device. Note that adding netdev_lock_ops()/netdev_unlock_ops() pair in netdev_run_todo() before kobject_put() would not work, because netdev_lock_ops() is conditional - it only locks when netdev_need_ops_lock() returns true. If the device doesn't require ops_lock, linkwatch won't hold any lock, and netdev_run_todo() acquiring the lock won't provide synchronization. Fix this by moving __dev_put() from linkwatch_do_dev() to its callers. The device reference logically pairs with de-listing the device, so it's reasonable for the caller that did the de-listing to release it. This allows placing __dev_put() after all device accesses are complete, preventing UAF. The bug can be reproduced by adding mdelay(2000) after linkwatch_do_dev() in __linkwatch_run_queue(), then running: ip tuntap add mode tun name tun_test ip link set tun_test up ip link set tun_test carrier off ip link set tun_test carrier on sleep 0.5 ip tuntap del mode tun name tun_test KASAN report: ================================================================== BUG: KASAN: use-after-free in netdev_need_ops_lock include/net/netdev_lock.h:33 [inline] BUG: KASAN: use-after-free in netdev_unlock_ops include/net/netdev_lock.h:47 [inline] BUG: KASAN: use-after-free in __linkwatch_run_queue+0x865/0x8a0 net/core/link_watch.c:245 Read of size 8 at addr ffff88804de5c008 by task kworker/u32:10/8123 CPU: 0 UID: 0 PID: 8123 Comm: kworker/u32:10 Not tainted syzkaller #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Workqueue: events_unbound linkwatch_event Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x100/0x190 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x156/0x4c9 mm/kasan/report.c:482 kasan_report+0xdf/0x1a0 mm/kasan/report.c:595 netdev_need_ops_lock include/net/netdev_lock.h:33 [inline] netdev_unlock_ops include/net/netdev_lock.h:47 [inline] __linkwatch_run_queue+0x865/0x8a0 net/core/link_watch.c:245 linkwatch_event+0x8f/0xc0 net/core/link_watch.c:304 process_one_work+0x9c2/0x1840 kernel/workqueue.c:3257 process_scheduled_works kernel/workqueue.c:3340 [inline] worker_thread+0x5da/0xe40 kernel/workqueue.c:3421 kthread+0x3b3/0x730 kernel/kthread.c:463 ret_from_fork+0x754/0xaf0 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246 </TASK> ==================================================================

In the Linux kernel, the following vulnerability has been resolved: mm/vma: fix anon_vma UAF on mremap() faulted, unfaulted merge Patch series "mm/vma: fix anon_vma UAF on mremap() faulted, unfaulted merge", v2. Commit 879bca0a2c4f ("mm/vma: fix incorrectly disallowed anonymous VMA merges") introduced the ability to merge previously unavailable VMA merge scenarios. However, it is handling merges incorrectly when it comes to mremap() of a faulted VMA adjacent to an unfaulted VMA. The issues arise in three cases: 1. Previous VMA unfaulted: copied -----| v |-----------|.............| | unfaulted |(faulted VMA)| |-----------|.............| prev 2. Next VMA unfaulted: copied -----| v |.............|-----------| |(faulted VMA)| unfaulted | |.............|-----------| next 3. Both adjacent VMAs unfaulted: copied -----| v |-----------|.............|-----------| | unfaulted |(faulted VMA)| unfaulted | |-----------|.............|-----------| prev next This series fixes each of these cases, and introduces self tests to assert that the issues are corrected. I also test a further case which was already handled, to assert that my changes continues to correctly handle it: 4. prev unfaulted, next faulted: copied -----| v |-----------|.............|-----------| | unfaulted |(faulted VMA)| faulted | |-----------|.............|-----------| prev next This bug was discovered via a syzbot report, linked to in the first patch in the series, I confirmed that this series fixes the bug. I also discovered that we are failing to check that the faulted VMA was not forked when merging a copied VMA in cases 1-3 above, an issue this series also addresses. I also added self tests to assert that this is resolved (and confirmed that the tests failed prior to this). I also cleaned up vma_expand() as part of this work, renamed vma_had_uncowed_parents() to vma_is_fork_child() as the previous name was unduly confusing, and simplified the comments around this function. This patch (of 4): Commit 879bca0a2c4f ("mm/vma: fix incorrectly disallowed anonymous VMA merges") introduced the ability to merge previously unavailable VMA merge scenarios. The key piece of logic introduced was the ability to merge a faulted VMA immediately next to an unfaulted VMA, which relies upon dup_anon_vma() to correctly handle anon_vma state. In the case of the merge of an existing VMA (that is changing properties of a VMA and then merging if those properties are shared by adjacent VMAs), dup_anon_vma() is invoked correctly. However in the case of the merge of a new VMA, a corner case peculiar to mremap() was missed. The issue is that vma_expand() only performs dup_anon_vma() if the target (the VMA that will ultimately become the merged VMA): is not the next VMA, i.e. the one that appears after the range in which the new VMA is to be established. A key insight here is that in all other cases other than mremap(), a new VMA merge either expands an existing VMA, meaning that the target VMA will be that VMA, or would have anon_vma be NULL. Specifically: * __mmap_region() - no anon_vma in place, initial mapping. * do_brk_flags() - expanding an existing VMA. * vma_merge_extend() - expanding an existing VMA. * relocate_vma_down() - no anon_vma in place, initial mapping. In addition, we are in the unique situation of needing to duplicate anon_vma state from a VMA that is neither the previous or next VMA being merged with. dup_anon_vma() deals exclusively with the target=unfaulted, src=faulted case. This leaves four possibilities, in each case where the copied VMA is faulted: 1. Previous VMA unfaulted: copied -----| ---truncated---

In the Linux kernel, the following vulnerability has been resolved: ksmbd: add chann_lock to protect ksmbd_chann_list xarray ksmbd_chann_list xarray lacks synchronization, allowing use-after-free in multi-channel sessions (between lookup_chann_list() and ksmbd_chann_del). Adds rw_semaphore chann_lock to struct ksmbd_session and protects all xa_load/xa_store/xa_erase accesses.

In the Linux kernel, the following vulnerability has been resolved: bonding: fix use-after-free due to enslave fail after slave array update Fix a use-after-free which happens due to enslave failure after the new slave has been added to the array. Since the new slave can be used for Tx immediately, we can use it after it has been freed by the enslave error cleanup path which frees the allocated slave memory. Slave update array is supposed to be called last when further enslave failures are not expected. Move it after xdp setup to avoid any problems. It is very easy to reproduce the problem with a simple xdp_pass prog: ip l add bond1 type bond mode balance-xor ip l set bond1 up ip l set dev bond1 xdp object xdp_pass.o sec xdp_pass ip l add dumdum type dummy Then run in parallel: while :; do ip l set dumdum master bond1 1>/dev/null 2>&1; done; mausezahn bond1 -a own -b rand -A rand -B 1.1.1.1 -c 0 -t tcp "dp=1-1023, flags=syn" The crash happens almost immediately: [ 605.602850] Oops: general protection fault, probably for non-canonical address 0xe0e6fc2460000137: 0000 [#1] SMP KASAN NOPTI [ 605.602916] KASAN: maybe wild-memory-access in range [0x07380123000009b8-0x07380123000009bf] [ 605.602946] CPU: 0 UID: 0 PID: 2445 Comm: mausezahn Kdump: loaded Tainted: G B 6.19.0-rc6+ #21 PREEMPT(voluntary) [ 605.602979] Tainted: [B]=BAD_PAGE [ 605.602998] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 605.603032] RIP: 0010:netdev_core_pick_tx+0xcd/0x210 [ 605.603063] Code: 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 3e 01 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b 6b 08 49 8d 7d 30 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 25 01 00 00 49 8b 45 30 4c 89 e2 48 89 ee 48 89 [ 605.603111] RSP: 0018:ffff88817b9af348 EFLAGS: 00010213 [ 605.603145] RAX: dffffc0000000000 RBX: ffff88817d28b420 RCX: 0000000000000000 [ 605.603172] RDX: 00e7002460000137 RSI: 0000000000000008 RDI: 07380123000009be [ 605.603199] RBP: ffff88817b541a00 R08: 0000000000000001 R09: fffffbfff3ed8c0c [ 605.603226] R10: ffffffff9f6c6067 R11: 0000000000000001 R12: 0000000000000000 [ 605.603253] R13: 073801230000098e R14: ffff88817d28b448 R15: ffff88817b541a84 [ 605.603286] FS: 00007f6570ef67c0(0000) GS:ffff888221dfa000(0000) knlGS:0000000000000000 [ 605.603319] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 605.603343] CR2: 00007f65712fae40 CR3: 000000011371b000 CR4: 0000000000350ef0 [ 605.603373] Call Trace: [ 605.603392] <TASK> [ 605.603410] __dev_queue_xmit+0x448/0x32a0 [ 605.603434] ? __pfx_vprintk_emit+0x10/0x10 [ 605.603461] ? __pfx_vprintk_emit+0x10/0x10 [ 605.603484] ? __pfx___dev_queue_xmit+0x10/0x10 [ 605.603507] ? bond_start_xmit+0xbfb/0xc20 [bonding] [ 605.603546] ? _printk+0xcb/0x100 [ 605.603566] ? __pfx__printk+0x10/0x10 [ 605.603589] ? bond_start_xmit+0xbfb/0xc20 [bonding] [ 605.603627] ? add_taint+0x5e/0x70 [ 605.603648] ? add_taint+0x2a/0x70 [ 605.603670] ? end_report.cold+0x51/0x75 [ 605.603693] ? bond_start_xmit+0xbfb/0xc20 [bonding] [ 605.603731] bond_start_xmit+0x623/0xc20 [bonding]

In the Linux kernel, the following vulnerability has been resolved: thermal: core: Address thermal zone removal races with resume Since thermal_zone_pm_complete() and thermal_zone_device_resume() re-initialize the poll_queue delayed work for the given thermal zone, the cancel_delayed_work_sync() in thermal_zone_device_unregister() may miss some already running work items and the thermal zone may be freed prematurely [1]. There are two failing scenarios that both start with running thermal_pm_notify_complete() right before invoking thermal_zone_device_unregister() for one of the thermal zones. In the first scenario, there is a work item already running for the given thermal zone when thermal_pm_notify_complete() calls thermal_zone_pm_complete() for that thermal zone and it continues to run when thermal_zone_device_unregister() starts. Since the poll_queue delayed work has been re-initialized by thermal_pm_notify_complete(), the running work item will be missed by the cancel_delayed_work_sync() in thermal_zone_device_unregister() and if it continues to run past the freeing of the thermal zone object, a use-after-free will occur. In the second scenario, thermal_zone_device_resume() queued up by thermal_pm_notify_complete() runs right after the thermal_zone_exit() called by thermal_zone_device_unregister() has returned. The poll_queue delayed work is re-initialized by it before cancel_delayed_work_sync() is called by thermal_zone_device_unregister(), so it may continue to run after the freeing of the thermal zone object, which also leads to a use-after-free. Address the first failing scenario by ensuring that no thermal work items will be running when thermal_pm_notify_complete() is called. For this purpose, first move the cancel_delayed_work() call from thermal_zone_pm_complete() to thermal_zone_pm_prepare() to prevent new work from entering the workqueue going forward. Next, switch over to using a dedicated workqueue for thermal events and update the code in thermal_pm_notify() to flush that workqueue after thermal_pm_notify_prepare() has returned which will take care of all leftover thermal work already on the workqueue (that leftover work would do nothing useful anyway because all of the thermal zones have been flagged as suspended). The second failing scenario is addressed by adding a tz->state check to thermal_zone_device_resume() to prevent it from re-initializing the poll_queue delayed work if the thermal zone is going away. Note that the above changes will also facilitate relocating the suspend and resume of thermal zones closer to the suspend and resume of devices, respectively.

In the Linux kernel, the following vulnerability has been resolved: kunit: string-stream: Fix a UAF bug in kunit_init_suite() In kunit_debugfs_create_suite(), if alloc_string_stream() fails in the kunit_suite_for_each_test_case() loop, the "suite->log = stream" has assigned before, and the error path only free the suite->log's stream memory but not set it to NULL, so the later string_stream_clear() of suite->log in kunit_init_suite() will cause below UAF bug. Set stream pointer to NULL after free to fix it. Unable to handle kernel paging request at virtual address 006440150000030d Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [006440150000030d] address between user and kernel address ranges Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: iio_test_gts industrialio_gts_helper cfg80211 rfkill ipv6 [last unloaded: iio_test_gts] CPU: 5 UID: 0 PID: 6253 Comm: modprobe Tainted: G B W N 6.12.0-rc4+ #458 Tainted: [B]=BAD_PAGE, [W]=WARN, [N]=TEST Hardware name: linux,dummy-virt (DT) pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : string_stream_clear+0x54/0x1ac lr : string_stream_clear+0x1a8/0x1ac sp : ffffffc080b47410 x29: ffffffc080b47410 x28: 006440550000030d x27: ffffff80c96b5e98 x26: ffffff80c96b5e80 x25: ffffffe461b3f6c0 x24: 0000000000000003 x23: ffffff80c96b5e88 x22: 1ffffff019cdf4fc x21: dfffffc000000000 x20: ffffff80ce6fa7e0 x19: 032202a80000186d x18: 0000000000001840 x17: 0000000000000000 x16: 0000000000000000 x15: ffffffe45c355cb4 x14: ffffffe45c35589c x13: ffffffe45c03da78 x12: ffffffb810168e75 x11: 1ffffff810168e74 x10: ffffffb810168e74 x9 : dfffffc000000000 x8 : 0000000000000004 x7 : 0000000000000003 x6 : 0000000000000001 x5 : ffffffc080b473a0 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 0000000000000001 x1 : ffffffe462fbf620 x0 : dfffffc000000000 Call trace: string_stream_clear+0x54/0x1ac __kunit_test_suites_init+0x108/0x1d8 kunit_exec_run_tests+0xb8/0x100 kunit_module_notify+0x400/0x55c notifier_call_chain+0xfc/0x3b4 blocking_notifier_call_chain+0x68/0x9c do_init_module+0x24c/0x5c8 load_module+0x4acc/0x4e90 init_module_from_file+0xd4/0x128 idempotent_init_module+0x2d4/0x57c __arm64_sys_finit_module+0xac/0x100 invoke_syscall+0x6c/0x258 el0_svc_common.constprop.0+0x160/0x22c do_el0_svc+0x44/0x5c el0_svc+0x48/0xb8 el0t_64_sync_handler+0x13c/0x158 el0t_64_sync+0x190/0x194 Code: f9400753 d2dff800 f2fbffe0 d343fe7c (38e06b80) ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Oops: Fatal exception

In the Linux kernel, the following vulnerability has been resolved: media: hackrf: fix to not free memory after the device is registered in hackrf_probe() In hackrf driver, the following race condition occurs: ``` CPU0 CPU1 hackrf_probe() kzalloc(); // alloc hackrf_dev .... v4l2_device_register(); .... fd = sys_open("/path/to/dev"); // open hackrf fd .... v4l2_device_unregister(); .... kfree(); // free hackrf_dev .... sys_ioctl(fd, ...); v4l2_ioctl(); video_is_registered() // UAF!! .... sys_close(fd); v4l2_release() // UAF!! hackrf_video_release() kfree(); // DFB!! ``` When a V4L2 or video device is unregistered, the device node is removed so new open() calls are blocked. However, file descriptors that are already open-and any in-flight I/O-do not terminate immediately; they remain valid until the last reference is dropped and the driver's release() is invoked. Therefore, freeing device memory on the error path after hackrf_probe() has registered dev it will lead to a race to use-after-free vuln, since those already-open handles haven't been released yet. And since release() free memory too, race to use-after-free and double-free vuln occur. To prevent this, if device is registered from probe(), it should be modified to free memory only through release() rather than calling kfree() directly.

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix use-after-free of sbi in f2fs_compress_write_end_io() In f2fs_compress_write_end_io(), dec_page_count(sbi, type) can bring the F2FS_WB_CP_DATA counter to zero, unblocking f2fs_wait_on_all_pages() in f2fs_put_super() on a concurrent unmount CPU. The unmount path then proceeds to call f2fs_destroy_page_array_cache(sbi), which destroys sbi->page_array_slab via kmem_cache_destroy(), and eventually kfree(sbi). Meanwhile, the bio completion callback is still executing: when it reaches page_array_free(sbi, ...), it dereferences sbi->page_array_slab — a destroyed slab cache — to call kmem_cache_free(), causing a use-after-free. This is the same class of bug as CVE-2026-23234 (which fixed the equivalent race in f2fs_write_end_io() in data.c), but in the compressed writeback completion path that was not covered by that fix. Fix this by moving dec_page_count() to after page_array_free(), so that all sbi accesses complete before the counter decrement that can unblock unmount. For non-last folios (where atomic_dec_return on cic->pending_pages is nonzero), dec_page_count is called immediately before returning — page_array_free is not reached on this path, so there is no post-decrement sbi access. For the last folio, page_array_free runs while the F2FS_WB_CP_DATA counter is still nonzero (this folio has not yet decremented it), keeping sbi alive, and dec_page_count runs as the final operation.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix use-after-free in ath12k_dp_cc_cleanup() During ath12k module removal, in ath12k_core_deinit(), ath12k_mac_destroy() un-registers ah->hw from mac80211 and frees the ah->hw as well as all the ar's in it. After this ath12k_core_soc_destroy()-> ath12k_dp_free()-> ath12k_dp_cc_cleanup() tries to access one of the freed ar's from pending skb. This is because during mac destroy, driver failed to flush few data packets, which were accessed later in ath12k_dp_cc_cleanup() and freed, but using ar from the packet led to this use-after-free. BUG: KASAN: use-after-free in ath12k_dp_cc_cleanup.part.0+0x5e2/0xd40 [ath12k] Write of size 4 at addr ffff888150bd3514 by task modprobe/8926 CPU: 0 UID: 0 PID: 8926 Comm: modprobe Not tainted 6.11.0-rc2-wt-ath+ #1746 Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS HNKBLi70.86A.0067.2021.0528.1339 05/28/2021 Call Trace: <TASK> dump_stack_lvl+0x7d/0xe0 print_address_description.constprop.0+0x33/0x3a0 print_report+0xb5/0x260 ? kasan_addr_to_slab+0x24/0x80 kasan_report+0xd8/0x110 ? ath12k_dp_cc_cleanup.part.0+0x5e2/0xd40 [ath12k] ? ath12k_dp_cc_cleanup.part.0+0x5e2/0xd40 [ath12k] kasan_check_range+0xf3/0x1a0 __kasan_check_write+0x14/0x20 ath12k_dp_cc_cleanup.part.0+0x5e2/0xd40 [ath12k] ath12k_dp_free+0x178/0x420 [ath12k] ath12k_core_stop+0x176/0x200 [ath12k] ath12k_core_deinit+0x13f/0x210 [ath12k] ath12k_pci_remove+0xad/0x1c0 [ath12k] pci_device_remove+0x9b/0x1b0 device_remove+0xbf/0x150 device_release_driver_internal+0x3c3/0x580 ? __kasan_check_read+0x11/0x20 driver_detach+0xc4/0x190 bus_remove_driver+0x130/0x2a0 driver_unregister+0x68/0x90 pci_unregister_driver+0x24/0x240 ? find_module_all+0x13e/0x1e0 ath12k_pci_exit+0x10/0x20 [ath12k] __do_sys_delete_module+0x32c/0x580 ? module_flags+0x2f0/0x2f0 ? kmem_cache_free+0xf0/0x410 ? __fput+0x56f/0xab0 ? __fput+0x56f/0xab0 ? debug_smp_processor_id+0x17/0x20 __x64_sys_delete_module+0x4f/0x70 x64_sys_call+0x522/0x9f0 do_syscall_64+0x64/0x130 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f8182c6ac8b Commit 24de1b7b231c ("wifi: ath12k: fix flush failure in recovery scenarios") added the change to decrement the pending packets count in case of recovery which make sense as ah->hw as well all ar's in it are intact during recovery, but during core deinit there is no use in decrementing packets count or waking up the empty waitq as the module is going to be removed also ar's from pending skb's can't be used and the packets should just be released back. To fix this, avoid accessing ar from skb->cb when driver is being unregistered. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00214-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

In the Linux kernel, the following vulnerability has been resolved: mshv: Fix use-after-free in mshv_map_user_memory error path In the error path of mshv_map_user_memory(), calling vfree() directly on the region leaves the MMU notifier registered. When userspace later unmaps the memory, the notifier fires and accesses the freed region, causing a use-after-free and potential kernel panic. Replace vfree() with mshv_partition_put() to properly unregister the MMU notifier before freeing the region.

In the Linux kernel, the following vulnerability has been resolved: binder: fix UAF in binder_netlink_report() Oneway transactions sent to frozen targets via binder_proc_transaction() return a BR_TRANSACTION_PENDING_FROZEN error but they are still treated as successful since the target is expected to thaw at some point. It is then not safe to access 't' after BR_TRANSACTION_PENDING_FROZEN errors as the transaction could have been consumed by the now thawed target. This is the case for binder_netlink_report() which derreferences 't' after a pending frozen error, as pointed out by the following KASAN report: ================================================================== BUG: KASAN: slab-use-after-free in binder_netlink_report.isra.0+0x694/0x6c8 Read of size 8 at addr ffff00000f98ba38 by task binder-util/522 CPU: 4 UID: 0 PID: 522 Comm: binder-util Not tainted 6.19.0-rc6-00015-gc03e9c42ae8f #1 PREEMPT Hardware name: linux,dummy-virt (DT) Call trace: binder_netlink_report.isra.0+0x694/0x6c8 binder_transaction+0x66e4/0x79b8 binder_thread_write+0xab4/0x4440 binder_ioctl+0x1fd4/0x2940 [...] Allocated by task 522: __kmalloc_cache_noprof+0x17c/0x50c binder_transaction+0x584/0x79b8 binder_thread_write+0xab4/0x4440 binder_ioctl+0x1fd4/0x2940 [...] Freed by task 488: kfree+0x1d0/0x420 binder_free_transaction+0x150/0x234 binder_thread_read+0x2d08/0x3ce4 binder_ioctl+0x488/0x2940 [...] ================================================================== Instead, make a transaction copy so the data can be safely accessed by binder_netlink_report() after a pending frozen error. While here, add a comment about not using t->buffer in binder_netlink_report().

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free in durable v2 replay of active file handles parse_durable_handle_context() unconditionally assigns dh_info->fp->conn to the current connection when handling a DURABLE_REQ_V2 context with SMB2_FLAGS_REPLAY_OPERATION. ksmbd_lookup_fd_cguid() does not filter by fp->conn, so it returns file handles that are already actively connected. The unconditional overwrite replaces fp->conn, and when the overwriting connection is subsequently freed, __ksmbd_close_fd() dereferences the stale fp->conn via spin_lock(&fp->conn->llist_lock), causing a use-after-free. KASAN report: [ 7.349357] ================================================================== [ 7.349607] BUG: KASAN: slab-use-after-free in _raw_spin_lock+0x75/0xe0 [ 7.349811] Write of size 4 at addr ffff8881056ac18c by task kworker/1:2/108 [ 7.350010] [ 7.350064] CPU: 1 UID: 0 PID: 108 Comm: kworker/1:2 Not tainted 7.0.0-rc3+ #58 PREEMPTLAZY [ 7.350068] Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 7.350070] Workqueue: ksmbd-io handle_ksmbd_work [ 7.350083] Call Trace: [ 7.350087] <TASK> [ 7.350087] dump_stack_lvl+0x64/0x80 [ 7.350094] print_report+0xce/0x660 [ 7.350100] ? __pfx__raw_spin_lock_irqsave+0x10/0x10 [ 7.350101] ? __pfx___mod_timer+0x10/0x10 [ 7.350106] ? _raw_spin_lock+0x75/0xe0 [ 7.350108] kasan_report+0xce/0x100 [ 7.350109] ? _raw_spin_lock+0x75/0xe0 [ 7.350114] kasan_check_range+0x105/0x1b0 [ 7.350116] _raw_spin_lock+0x75/0xe0 [ 7.350118] ? __pfx__raw_spin_lock+0x10/0x10 [ 7.350119] ? __call_rcu_common.constprop.0+0x25e/0x780 [ 7.350125] ? close_id_del_oplock+0x2cc/0x4e0 [ 7.350128] __ksmbd_close_fd+0x27f/0xaf0 [ 7.350131] ksmbd_close_fd+0x135/0x1b0 [ 7.350133] smb2_close+0xb19/0x15b0 [ 7.350142] ? __pfx_smb2_close+0x10/0x10 [ 7.350143] ? xas_load+0x18/0x270 [ 7.350146] ? _raw_spin_lock+0x84/0xe0 [ 7.350148] ? __pfx__raw_spin_lock+0x10/0x10 [ 7.350150] ? _raw_spin_unlock+0xe/0x30 [ 7.350151] ? ksmbd_smb2_check_message+0xeb2/0x24c0 [ 7.350153] ? ksmbd_tree_conn_lookup+0xcd/0xf0 [ 7.350154] handle_ksmbd_work+0x40f/0x1080 [ 7.350156] process_one_work+0x5fa/0xef0 [ 7.350162] ? assign_work+0x122/0x3e0 [ 7.350163] worker_thread+0x54b/0xf70 [ 7.350165] ? __pfx_worker_thread+0x10/0x10 [ 7.350166] kthread+0x346/0x470 [ 7.350170] ? recalc_sigpending+0x19b/0x230 [ 7.350176] ? __pfx_kthread+0x10/0x10 [ 7.350178] ret_from_fork+0x4fb/0x6c0 [ 7.350183] ? __pfx_ret_from_fork+0x10/0x10 [ 7.350185] ? __switch_to+0x36c/0xbe0 [ 7.350188] ? __pfx_kthread+0x10/0x10 [ 7.350190] ret_from_fork_asm+0x1a/0x30 [ 7.350197] </TASK> [ 7.350197] [ 7.355160] Allocated by task 123: [ 7.355261] kasan_save_stack+0x33/0x60 [ 7.355373] kasan_save_track+0x14/0x30 [ 7.355484] __kasan_kmalloc+0x8f/0xa0 [ 7.355593] ksmbd_conn_alloc+0x44/0x6d0 [ 7.355711] ksmbd_kthread_fn+0x243/0xd70 [ 7.355839] kthread+0x346/0x470 [ 7.355942] ret_from_fork+0x4fb/0x6c0 [ 7.356051] ret_from_fork_asm+0x1a/0x30 [ 7.356164] [ 7.356214] Freed by task 134: [ 7.356305] kasan_save_stack+0x33/0x60 [ 7.356416] kasan_save_track+0x14/0x30 [ 7.356527] kasan_save_free_info+0x3b/0x60 [ 7.356646] __kasan_slab_free+0x43/0x70 [ 7.356761] kfree+0x1ca/0x430 [ 7.356862] ksmbd_tcp_disconnect+0x59/0xe0 [ 7.356993] ksmbd_conn_handler_loop+0x77e/0xd40 [ 7.357138] kthread+0x346/0x470 [ 7.357240] ret_from_fork+0x4fb/0x6c0 [ 7.357350] ret_from_fork_asm+0x1a/0x30 [ 7.357463] [ 7.357513] The buggy address belongs to the object at ffff8881056ac000 [ 7.357513] which belongs to the cache kmalloc-1k of size 1024 [ 7.357857] The buggy address is located 396 bytes inside of [ 7.357857] freed 1024-byte region ---truncated---

Use-after-free vulnerability in the msm_set_crop function in drivers/media/video/msm/msm_camera.c in the MSM-Camera driver for the Linux kernel 3.x, as used in Qualcomm Innovation Center (QuIC) Android contributions for MSM devices and other products, allows attackers to gain privileges or cause a denial of service (memory corruption) via an application that makes a crafted ioctl call.

io_uring use work_flags to determine which identity need to grab from the calling process to make sure it is consistent with the calling process when executing IORING_OP. Some operations are missing some types, which can lead to incorrect reference counts which can then lead to a double free. We recommend upgrading the kernel past commit df3f3bb5059d20ef094d6b2f0256c4bf4127a859

In the Linux kernel, the following vulnerability has been resolved: net/sched: Enforce that teql can only be used as root qdisc Design intent of teql is that it is only supposed to be used as root qdisc. We need to check for that constraint. Although not important, I will describe the scenario that unearthed this issue for the curious. GangMin Kim <km.kim1503@gmail.com> managed to concot a scenario as follows: ROOT qdisc 1:0 (QFQ) ├── class 1:1 (weight=15, lmax=16384) netem with delay 6.4s └── class 1:2 (weight=1, lmax=1514) teql GangMin sends a packet which is enqueued to 1:1 (netem). Any invocation of dequeue by QFQ from this class will not return a packet until after 6.4s. In the meantime, a second packet is sent and it lands on 1:2. teql's enqueue will return success and this will activate class 1:2. Main issue is that teql only updates the parent visible qlen (sch->q.qlen) at dequeue. Since QFQ will only call dequeue if peek succeeds (and teql's peek always returns NULL), dequeue will never be called and thus the qlen will remain as 0. With that in mind, when GangMin updates 1:2's lmax value, the qfq_change_class calls qfq_deact_rm_from_agg. Since the child qdisc's qlen was not incremented, qfq fails to deactivate the class, but still frees its pointers from the aggregate. So when the first packet is rescheduled after 6.4 seconds (netem's delay), a dangling pointer is accessed causing GangMin's causing a UAF.

In the Linux kernel, the following vulnerability has been resolved: nfsd: make sure exp active before svc_export_show The function `e_show` was called with protection from RCU. This only ensures that `exp` will not be freed. Therefore, the reference count for `exp` can drop to zero, which will trigger a refcount use-after-free warning when `exp_get` is called. To resolve this issue, use `cache_get_rcu` to ensure that `exp` remains active. ------------[ cut here ]------------ refcount_t: addition on 0; use-after-free. WARNING: CPU: 3 PID: 819 at lib/refcount.c:25 refcount_warn_saturate+0xb1/0x120 CPU: 3 UID: 0 PID: 819 Comm: cat Not tainted 6.12.0-rc3+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014 RIP: 0010:refcount_warn_saturate+0xb1/0x120 ... Call Trace: <TASK> e_show+0x20b/0x230 [nfsd] seq_read_iter+0x589/0x770 seq_read+0x1e5/0x270 vfs_read+0x125/0x530 ksys_read+0xc1/0x160 do_syscall_64+0x5f/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e

A use-after-free vulnerability in the Linux kernel's net/sched: cls_route component can be exploited to achieve local privilege escalation. When route4_change() is called on an existing filter, the whole tcf_result struct is always copied into the new instance of the filter. This causes a problem when updating a filter bound to a class, as tcf_unbind_filter() is always called on the old instance in the success path, decreasing filter_cnt of the still referenced class and allowing it to be deleted, leading to a use-after-free. We recommend upgrading past commit b80b829e9e2c1b3f7aae34855e04d8f6ecaf13c8.

In the Linux kernel, the following vulnerability has been resolved: scsi: target: iscsi: Fix use-after-free in iscsit_dec_session_usage_count() In iscsit_dec_session_usage_count(), the function calls complete() while holding the sess->session_usage_lock. Similar to the connection usage count logic, the waiter signaled by complete() (e.g., in the session release path) may wake up and free the iscsit_session structure immediately. This creates a race condition where the current thread may attempt to execute spin_unlock_bh() on a session structure that has already been deallocated, resulting in a KASAN slab-use-after-free. To resolve this, release the session_usage_lock before calling complete() to ensure all dereferences of the sess pointer are finished before the waiter is allowed to proceed with deallocation.

A use-after-free vulnerability in the Linux kernel's net/sched: cls_fw component can be exploited to achieve local privilege escalation. When fw_change() is called on an existing filter, the whole tcf_result struct is always copied into the new instance of the filter. This causes a problem when updating a filter bound to a class, as tcf_unbind_filter() is always called on the old instance in the success path, decreasing filter_cnt of the still referenced class and allowing it to be deleted, leading to a use-after-free. We recommend upgrading past commit 76e42ae831991c828cffa8c37736ebfb831ad5ec.

In the Linux kernel, the following vulnerability has been resolved: media: atomisp: Fix use after free in atomisp_alloc_css_stat_bufs() The "s3a_buf" is freed along with all the other items on the "asd->s3a_stats" list. It leads to a double free and a use after free.

In the Linux kernel, the following vulnerability has been resolved: macsec: Fix use-after-free while sending the offloading packet KASAN reports the following UAF. The metadata_dst, which is used to store the SCI value for macsec offload, is already freed by metadata_dst_free() in macsec_free_netdev(), while driver still use it for sending the packet. To fix this issue, dst_release() is used instead to release metadata_dst. So it is not freed instantly in macsec_free_netdev() if still referenced by skb. BUG: KASAN: slab-use-after-free in mlx5e_xmit+0x1e8f/0x4190 [mlx5_core] Read of size 2 at addr ffff88813e42e038 by task kworker/7:2/714 [...] Workqueue: mld mld_ifc_work Call Trace: <TASK> dump_stack_lvl+0x51/0x60 print_report+0xc1/0x600 kasan_report+0xab/0xe0 mlx5e_xmit+0x1e8f/0x4190 [mlx5_core] dev_hard_start_xmit+0x120/0x530 sch_direct_xmit+0x149/0x11e0 __qdisc_run+0x3ad/0x1730 __dev_queue_xmit+0x1196/0x2ed0 vlan_dev_hard_start_xmit+0x32e/0x510 [8021q] dev_hard_start_xmit+0x120/0x530 __dev_queue_xmit+0x14a7/0x2ed0 macsec_start_xmit+0x13e9/0x2340 dev_hard_start_xmit+0x120/0x530 __dev_queue_xmit+0x14a7/0x2ed0 ip6_finish_output2+0x923/0x1a70 ip6_finish_output+0x2d7/0x970 ip6_output+0x1ce/0x3a0 NF_HOOK.constprop.0+0x15f/0x190 mld_sendpack+0x59a/0xbd0 mld_ifc_work+0x48a/0xa80 process_one_work+0x5aa/0xe50 worker_thread+0x79c/0x1290 kthread+0x28f/0x350 ret_from_fork+0x2d/0x70 ret_from_fork_asm+0x11/0x20 </TASK> Allocated by task 3922: kasan_save_stack+0x20/0x40 kasan_save_track+0x10/0x30 __kasan_kmalloc+0x77/0x90 __kmalloc_noprof+0x188/0x400 metadata_dst_alloc+0x1f/0x4e0 macsec_newlink+0x914/0x1410 __rtnl_newlink+0xe08/0x15b0 rtnl_newlink+0x5f/0x90 rtnetlink_rcv_msg+0x667/0xa80 netlink_rcv_skb+0x12c/0x360 netlink_unicast+0x551/0x770 netlink_sendmsg+0x72d/0xbd0 __sock_sendmsg+0xc5/0x190 ____sys_sendmsg+0x52e/0x6a0 ___sys_sendmsg+0xeb/0x170 __sys_sendmsg+0xb5/0x140 do_syscall_64+0x4c/0x100 entry_SYSCALL_64_after_hwframe+0x4b/0x53 Freed by task 4011: kasan_save_stack+0x20/0x40 kasan_save_track+0x10/0x30 kasan_save_free_info+0x37/0x50 poison_slab_object+0x10c/0x190 __kasan_slab_free+0x11/0x30 kfree+0xe0/0x290 macsec_free_netdev+0x3f/0x140 netdev_run_todo+0x450/0xc70 rtnetlink_rcv_msg+0x66f/0xa80 netlink_rcv_skb+0x12c/0x360 netlink_unicast+0x551/0x770 netlink_sendmsg+0x72d/0xbd0 __sock_sendmsg+0xc5/0x190 ____sys_sendmsg+0x52e/0x6a0 ___sys_sendmsg+0xeb/0x170 __sys_sendmsg+0xb5/0x140 do_syscall_64+0x4c/0x100 entry_SYSCALL_64_after_hwframe+0x4b/0x53

An issue was discovered in the Linux kernel before 5.7. The KVM subsystem allows out-of-range access to memslots after a deletion, aka CID-0774a964ef56. This affects arch/s390/kvm/kvm-s390.c, include/linux/kvm_host.h, and virt/kvm/kvm_main.c.

In the Linux kernel, the following vulnerability has been resolved: smb: client: Fix use-after-free of network namespace. Recently, we got a customer report that CIFS triggers oops while reconnecting to a server. [0] The workload runs on Kubernetes, and some pods mount CIFS servers in non-root network namespaces. The problem rarely happened, but it was always while the pod was dying. The root cause is wrong reference counting for network namespace. CIFS uses kernel sockets, which do not hold refcnt of the netns that the socket belongs to. That means CIFS must ensure the socket is always freed before its netns; otherwise, use-after-free happens. The repro steps are roughly: 1. mount CIFS in a non-root netns 2. drop packets from the netns 3. destroy the netns 4. unmount CIFS We can reproduce the issue quickly with the script [1] below and see the splat [2] if CONFIG_NET_NS_REFCNT_TRACKER is enabled. When the socket is TCP, it is hard to guarantee the netns lifetime without holding refcnt due to async timers. Let's hold netns refcnt for each socket as done for SMC in commit 9744d2bf1976 ("smc: Fix use-after-free in tcp_write_timer_handler()."). Note that we need to move put_net() from cifs_put_tcp_session() to clean_demultiplex_info(); otherwise, __sock_create() still could touch a freed netns while cifsd tries to reconnect from cifs_demultiplex_thread(). Also, maybe_get_net() cannot be put just before __sock_create() because the code is not under RCU and there is a small chance that the same address happened to be reallocated to another netns. [0]: CIFS: VFS: \\XXXXXXXXXXX has not responded in 15 seconds. Reconnecting... CIFS: Serverclose failed 4 times, giving up Unable to handle kernel paging request at virtual address 14de99e461f84a07 Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 [14de99e461f84a07] address between user and kernel address ranges Internal error: Oops: 0000000096000004 [#1] SMP Modules linked in: cls_bpf sch_ingress nls_utf8 cifs cifs_arc4 cifs_md4 dns_resolver tcp_diag inet_diag veth xt_state xt_connmark nf_conntrack_netlink xt_nat xt_statistic xt_MASQUERADE xt_mark xt_addrtype ipt_REJECT nf_reject_ipv4 nft_chain_nat nf_nat xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 xt_comment nft_compat nf_tables nfnetlink overlay nls_ascii nls_cp437 sunrpc vfat fat aes_ce_blk aes_ce_cipher ghash_ce sm4_ce_cipher sm4 sm3_ce sm3 sha3_ce sha512_ce sha512_arm64 sha1_ce ena button sch_fq_codel loop fuse configfs dmi_sysfs sha2_ce sha256_arm64 dm_mirror dm_region_hash dm_log dm_mod dax efivarfs CPU: 5 PID: 2690970 Comm: cifsd Not tainted 6.1.103-109.184.amzn2023.aarch64 #1 Hardware name: Amazon EC2 r7g.4xlarge/, BIOS 1.0 11/1/2018 pstate: 00400005 (nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : fib_rules_lookup+0x44/0x238 lr : __fib_lookup+0x64/0xbc sp : ffff8000265db790 x29: ffff8000265db790 x28: 0000000000000000 x27: 000000000000bd01 x26: 0000000000000000 x25: ffff000b4baf8000 x24: ffff00047b5e4580 x23: ffff8000265db7e0 x22: 0000000000000000 x21: ffff00047b5e4500 x20: ffff0010e3f694f8 x19: 14de99e461f849f7 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 3f92800abd010002 x11: 0000000000000001 x10: ffff0010e3f69420 x9 : ffff800008a6f294 x8 : 0000000000000000 x7 : 0000000000000006 x6 : 0000000000000000 x5 : 0000000000000001 x4 : ffff001924354280 x3 : ffff8000265db7e0 x2 : 0000000000000000 x1 : ffff0010e3f694f8 x0 : ffff00047b5e4500 Call trace: fib_rules_lookup+0x44/0x238 __fib_lookup+0x64/0xbc ip_route_output_key_hash_rcu+0x2c4/0x398 ip_route_output_key_hash+0x60/0x8c tcp_v4_connect+0x290/0x488 __inet_stream_connect+0x108/0x3d0 inet_stream_connect+0x50/0x78 kernel_connect+0x6c/0xac generic_ip_conne ---truncated---

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Fix slab-use-after-free Read in set_powered_sync This fixes the following crash: ================================================================== BUG: KASAN: slab-use-after-free in set_powered_sync+0x3a/0xc0 net/bluetooth/mgmt.c:1353 Read of size 8 at addr ffff888029b4dd18 by task kworker/u9:0/54 CPU: 1 UID: 0 PID: 54 Comm: kworker/u9:0 Not tainted 6.11.0-rc6-syzkaller-01155-gf723224742fc #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 Workqueue: hci0 hci_cmd_sync_work Call Trace: <TASK> __dump_stack lib/dump_stack.c:93 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 q kasan_report+0x143/0x180 mm/kasan/report.c:601 set_powered_sync+0x3a/0xc0 net/bluetooth/mgmt.c:1353 hci_cmd_sync_work+0x22b/0x400 net/bluetooth/hci_sync.c:328 process_one_work kernel/workqueue.c:3231 [inline] process_scheduled_works+0xa2c/0x1830 kernel/workqueue.c:3312 worker_thread+0x86d/0xd10 kernel/workqueue.c:3389 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> Allocated by task 5247: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:370 [inline] __kasan_kmalloc+0x98/0xb0 mm/kasan/common.c:387 kasan_kmalloc include/linux/kasan.h:211 [inline] __kmalloc_cache_noprof+0x19c/0x2c0 mm/slub.c:4193 kmalloc_noprof include/linux/slab.h:681 [inline] kzalloc_noprof include/linux/slab.h:807 [inline] mgmt_pending_new+0x65/0x250 net/bluetooth/mgmt_util.c:269 mgmt_pending_add+0x36/0x120 net/bluetooth/mgmt_util.c:296 set_powered+0x3cd/0x5e0 net/bluetooth/mgmt.c:1394 hci_mgmt_cmd+0xc47/0x11d0 net/bluetooth/hci_sock.c:1712 hci_sock_sendmsg+0x7b8/0x11c0 net/bluetooth/hci_sock.c:1832 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x221/0x270 net/socket.c:745 sock_write_iter+0x2dd/0x400 net/socket.c:1160 new_sync_write fs/read_write.c:497 [inline] vfs_write+0xa72/0xc90 fs/read_write.c:590 ksys_write+0x1a0/0x2c0 fs/read_write.c:643 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 5246: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:579 poison_slab_object+0xe0/0x150 mm/kasan/common.c:240 __kasan_slab_free+0x37/0x60 mm/kasan/common.c:256 kasan_slab_free include/linux/kasan.h:184 [inline] slab_free_hook mm/slub.c:2256 [inline] slab_free mm/slub.c:4477 [inline] kfree+0x149/0x360 mm/slub.c:4598 settings_rsp+0x2bc/0x390 net/bluetooth/mgmt.c:1443 mgmt_pending_foreach+0xd1/0x130 net/bluetooth/mgmt_util.c:259 __mgmt_power_off+0x112/0x420 net/bluetooth/mgmt.c:9455 hci_dev_close_sync+0x665/0x11a0 net/bluetooth/hci_sync.c:5191 hci_dev_do_close net/bluetooth/hci_core.c:483 [inline] hci_dev_close+0x112/0x210 net/bluetooth/hci_core.c:508 sock_do_ioctl+0x158/0x460 net/socket.c:1222 sock_ioctl+0x629/0x8e0 net/socket.c:1341 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83gv entry_SYSCALL_64_after_hwframe+0x77/0x7f

An issue was discovered in the Linux kernel before 5.8.2. fs/io_uring.c has a use-after-free related to io_async_task_func and ctx reference holding, aka CID-6d816e088c35.

In the Linux kernel, the following vulnerability has been resolved: net/smc: do not leave a dangling sk pointer in __smc_create() Thanks to commit 4bbd360a5084 ("socket: Print pf->create() when it does not clear sock->sk on failure."), syzbot found an issue with AF_SMC: smc_create must clear sock->sk on failure, family: 43, type: 1, protocol: 0 WARNING: CPU: 0 PID: 5827 at net/socket.c:1565 __sock_create+0x96f/0xa30 net/socket.c:1563 Modules linked in: CPU: 0 UID: 0 PID: 5827 Comm: syz-executor259 Not tainted 6.12.0-rc6-next-20241106-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 RIP: 0010:__sock_create+0x96f/0xa30 net/socket.c:1563 Code: 03 00 74 08 4c 89 e7 e8 4f 3b 85 f8 49 8b 34 24 48 c7 c7 40 89 0c 8d 8b 54 24 04 8b 4c 24 0c 44 8b 44 24 08 e8 32 78 db f7 90 <0f> 0b 90 90 e9 d3 fd ff ff 89 e9 80 e1 07 fe c1 38 c1 0f 8c ee f7 RSP: 0018:ffffc90003e4fda0 EFLAGS: 00010246 RAX: 099c6f938c7f4700 RBX: 1ffffffff1a595fd RCX: ffff888034823c00 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 00000000ffffffe9 R08: ffffffff81567052 R09: 1ffff920007c9f50 R10: dffffc0000000000 R11: fffff520007c9f51 R12: ffffffff8d2cafe8 R13: 1ffffffff1a595fe R14: ffffffff9a789c40 R15: ffff8880764298c0 FS: 000055557b518380(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa62ff43225 CR3: 0000000031628000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> sock_create net/socket.c:1616 [inline] __sys_socket_create net/socket.c:1653 [inline] __sys_socket+0x150/0x3c0 net/socket.c:1700 __do_sys_socket net/socket.c:1714 [inline] __se_sys_socket net/socket.c:1712 [inline] For reference, see commit 2d859aff775d ("Merge branch 'do-not-leave-dangling-sk-pointers-in-pf-create-functions'")

In the Linux kernel, the following vulnerability has been resolved: HID: roccat: fix use-after-free in roccat_report_event roccat_report_event() iterates over the device->readers list without holding the readers_lock. This allows a concurrent roccat_release() to remove and free a reader while it's still being accessed, leading to a use-after-free. Protect the readers list traversal with the readers_lock mutex.

In the Linux kernel, the following vulnerability has been resolved: SUNRPC: make sure cache entry active before cache_show The function `c_show` was called with protection from RCU. This only ensures that `cp` will not be freed. Therefore, the reference count for `cp` can drop to zero, which will trigger a refcount use-after-free warning when `cache_get` is called. To resolve this issue, use `cache_get_rcu` to ensure that `cp` remains active. ------------[ cut here ]------------ refcount_t: addition on 0; use-after-free. WARNING: CPU: 7 PID: 822 at lib/refcount.c:25 refcount_warn_saturate+0xb1/0x120 CPU: 7 UID: 0 PID: 822 Comm: cat Not tainted 6.12.0-rc3+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014 RIP: 0010:refcount_warn_saturate+0xb1/0x120 Call Trace: <TASK> c_show+0x2fc/0x380 [sunrpc] seq_read_iter+0x589/0x770 seq_read+0x1e5/0x270 proc_reg_read+0xe1/0x140 vfs_read+0x125/0x530 ksys_read+0xc1/0x160 do_syscall_64+0x5f/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e

In the Linux kernel, the following vulnerability has been resolved: media: as102: fix to not free memory after the device is registered in as102_usb_probe() In as102_usb driver, the following race condition occurs: ``` CPU0 CPU1 as102_usb_probe() kzalloc(); // alloc as102_dev_t .... usb_register_dev(); fd = sys_open("/path/to/dev"); // open as102 fd .... usb_deregister_dev(); .... kfree(); // free as102_dev_t .... sys_close(fd); as102_release() // UAF!! as102_usb_release() kfree(); // DFB!! ``` When a USB character device registered with usb_register_dev() is later unregistered (via usb_deregister_dev() or disconnect), the device node is removed so new open() calls fail. However, file descriptors that are already open do not go away immediately: they remain valid until the last reference is dropped and the driver's .release() is invoked. In as102, as102_usb_probe() calls usb_register_dev() and then, on an error path, does usb_deregister_dev() and frees as102_dev_t right away. If userspace raced a successful open() before the deregistration, that open FD will later hit as102_release() --> as102_usb_release() and access or free as102_dev_t again, occur a race to use-after-free and double-free vuln. The fix is to never kfree(as102_dev_t) directly once usb_register_dev() has succeeded. After deregistration, defer freeing memory to .release(). In other words, let release() perform the last kfree when the final open FD is closed.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_helper: pass helper to expect cleanup nf_conntrack_helper_unregister() calls nf_ct_expect_iterate_destroy() to remove expectations belonging to the helper being unregistered. However, it passes NULL instead of the helper pointer as the data argument, so expect_iter_me() never matches any expectation and all of them survive the cleanup. After unregister returns, nfnl_cthelper_del() frees the helper object immediately. Subsequent expectation dumps or packet-driven init_conntrack() calls then dereference the freed exp->helper, causing a use-after-free. Pass the actual helper pointer so expectations referencing it are properly destroyed before the helper object is freed. BUG: KASAN: slab-use-after-free in string+0x38f/0x430 Read of size 1 at addr ffff888003b14d20 by task poc/103 Call Trace: string+0x38f/0x430 vsnprintf+0x3cc/0x1170 seq_printf+0x17a/0x240 exp_seq_show+0x2e5/0x560 seq_read_iter+0x419/0x1280 proc_reg_read+0x1ac/0x270 vfs_read+0x179/0x930 ksys_read+0xef/0x1c0 Freed by task 103: The buggy address is located 32 bytes inside of freed 192-byte region [ffff888003b14d00, ffff888003b14dc0)

In the Linux kernel, the following vulnerability has been resolved: btrfs: unset reloc control if transaction commit fails in prepare_to_relocate() In btrfs_relocate_block_group(), the rc is allocated. Then btrfs_relocate_block_group() calls relocate_block_group() prepare_to_relocate() set_reloc_control() that assigns rc to the variable fs_info->reloc_ctl. When prepare_to_relocate() returns, it calls btrfs_commit_transaction() btrfs_start_dirty_block_groups() btrfs_alloc_path() kmem_cache_zalloc() which may fail for example (or other errors could happen). When the failure occurs, btrfs_relocate_block_group() detects the error and frees rc and doesn't set fs_info->reloc_ctl to NULL. After that, in btrfs_init_reloc_root(), rc is retrieved from fs_info->reloc_ctl and then used, which may cause a use-after-free bug. This possible bug can be triggered by calling btrfs_ioctl_balance() before calling btrfs_ioctl_defrag(). To fix this possible bug, in prepare_to_relocate(), check if btrfs_commit_transaction() fails. If the failure occurs, unset_reloc_control() is called to set fs_info->reloc_ctl to NULL. The error log in our fault-injection testing is shown as follows: [ 58.751070] BUG: KASAN: use-after-free in btrfs_init_reloc_root+0x7ca/0x920 [btrfs] ... [ 58.753577] Call Trace: ... [ 58.755800] kasan_report+0x45/0x60 [ 58.756066] btrfs_init_reloc_root+0x7ca/0x920 [btrfs] [ 58.757304] record_root_in_trans+0x792/0xa10 [btrfs] [ 58.757748] btrfs_record_root_in_trans+0x463/0x4f0 [btrfs] [ 58.758231] start_transaction+0x896/0x2950 [btrfs] [ 58.758661] btrfs_defrag_root+0x250/0xc00 [btrfs] [ 58.759083] btrfs_ioctl_defrag+0x467/0xa00 [btrfs] [ 58.759513] btrfs_ioctl+0x3c95/0x114e0 [btrfs] ... [ 58.768510] Allocated by task 23683: [ 58.768777] ____kasan_kmalloc+0xb5/0xf0 [ 58.769069] __kmalloc+0x227/0x3d0 [ 58.769325] alloc_reloc_control+0x10a/0x3d0 [btrfs] [ 58.769755] btrfs_relocate_block_group+0x7aa/0x1e20 [btrfs] [ 58.770228] btrfs_relocate_chunk+0xf1/0x760 [btrfs] [ 58.770655] __btrfs_balance+0x1326/0x1f10 [btrfs] [ 58.771071] btrfs_balance+0x3150/0x3d30 [btrfs] [ 58.771472] btrfs_ioctl_balance+0xd84/0x1410 [btrfs] [ 58.771902] btrfs_ioctl+0x4caa/0x114e0 [btrfs] ... [ 58.773337] Freed by task 23683: ... [ 58.774815] kfree+0xda/0x2b0 [ 58.775038] free_reloc_control+0x1d6/0x220 [btrfs] [ 58.775465] btrfs_relocate_block_group+0x115c/0x1e20 [btrfs] [ 58.775944] btrfs_relocate_chunk+0xf1/0x760 [btrfs] [ 58.776369] __btrfs_balance+0x1326/0x1f10 [btrfs] [ 58.776784] btrfs_balance+0x3150/0x3d30 [btrfs] [ 58.777185] btrfs_ioctl_balance+0xd84/0x1410 [btrfs] [ 58.777621] btrfs_ioctl+0x4caa/0x114e0 [btrfs] ...

The sctp_do_peeloff function in net/sctp/socket.c in the Linux kernel before 4.14 does not check whether the intended netns is used in a peel-off action, which allows local users to cause a denial of service (use-after-free and system crash) or possibly have unspecified other impact via crafted system calls.