In the Linux kernel, the following vulnerability has been resolved: bcache: avoid oversized read request in cache missing code path In the cache missing code path of cached device, if a proper location from the internal B+ tree is matched for a cache miss range, function cached_dev_cache_miss() will be called in cache_lookup_fn() in the following code block, [code block 1] 526 unsigned int sectors = KEY_INODE(k) == s->iop.inode 527 ? min_t(uint64_t, INT_MAX, 528 KEY_START(k) - bio->bi_iter.bi_sector) 529 : INT_MAX; 530 int ret = s->d->cache_miss(b, s, bio, sectors); Here s->d->cache_miss() is the call backfunction pointer initialized as cached_dev_cache_miss(), the last parameter 'sectors' is an important hint to calculate the size of read request to backing device of the missing cache data. Current calculation in above code block may generate oversized value of 'sectors', which consequently may trigger 2 different potential kernel panics by BUG() or BUG_ON() as listed below, 1) BUG_ON() inside bch_btree_insert_key(), [code block 2] 886 BUG_ON(b->ops->is_extents && !KEY_SIZE(k)); 2) BUG() inside biovec_slab(), [code block 3] 51 default: 52 BUG(); 53 return NULL; All the above panics are original from cached_dev_cache_miss() by the oversized parameter 'sectors'. Inside cached_dev_cache_miss(), parameter 'sectors' is used to calculate the size of data read from backing device for the cache missing. This size is stored in s->insert_bio_sectors by the following lines of code, [code block 4] 909 s->insert_bio_sectors = min(sectors, bio_sectors(bio) + reada); Then the actual key inserting to the internal B+ tree is generated and stored in s->iop.replace_key by the following lines of code, [code block 5] 911 s->iop.replace_key = KEY(s->iop.inode, 912 bio->bi_iter.bi_sector + s->insert_bio_sectors, 913 s->insert_bio_sectors); The oversized parameter 'sectors' may trigger panic 1) by BUG_ON() from the above code block. And the bio sending to backing device for the missing data is allocated with hint from s->insert_bio_sectors by the following lines of code, [code block 6] 926 cache_bio = bio_alloc_bioset(GFP_NOWAIT, 927 DIV_ROUND_UP(s->insert_bio_sectors, PAGE_SECTORS), 928 &dc->disk.bio_split); The oversized parameter 'sectors' may trigger panic 2) by BUG() from the agove code block. Now let me explain how the panics happen with the oversized 'sectors'. In code block 5, replace_key is generated by macro KEY(). From the definition of macro KEY(), [code block 7] 71 #define KEY(inode, offset, size) \ 72 ((struct bkey) { \ 73 .high = (1ULL << 63) | ((__u64) (size) << 20) | (inode), \ 74 .low = (offset) \ 75 }) Here 'size' is 16bits width embedded in 64bits member 'high' of struct bkey. But in code block 1, if "KEY_START(k) - bio->bi_iter.bi_sector" is very probably to be larger than (1<<16) - 1, which makes the bkey size calculation in code block 5 is overflowed. In one bug report the value of parameter 'sectors' is 131072 (= 1 << 17), the overflowed 'sectors' results the overflowed s->insert_bio_sectors in code block 4, then makes size field of s->iop.replace_key to be 0 in code block 5. Then the 0- sized s->iop.replace_key is inserted into the internal B+ tree as cache missing check key (a special key to detect and avoid a racing between normal write request and cache missing read request) as, [code block 8] 915 ret = bch_btree_insert_check_key(b, &s->op, &s->iop.replace_key); Then the 0-sized s->iop.replace_key as 3rd parameter triggers the bkey size check BUG_ON() in code block 2, and causes the kernel panic 1). Another ke ---truncated---

In the Linux kernel, the following vulnerability has been resolved: io_uring: fix link timeout refs WARNING: CPU: 0 PID: 10242 at lib/refcount.c:28 refcount_warn_saturate+0x15b/0x1a0 lib/refcount.c:28 RIP: 0010:refcount_warn_saturate+0x15b/0x1a0 lib/refcount.c:28 Call Trace: __refcount_sub_and_test include/linux/refcount.h:283 [inline] __refcount_dec_and_test include/linux/refcount.h:315 [inline] refcount_dec_and_test include/linux/refcount.h:333 [inline] io_put_req fs/io_uring.c:2140 [inline] io_queue_linked_timeout fs/io_uring.c:6300 [inline] __io_queue_sqe+0xbef/0xec0 fs/io_uring.c:6354 io_submit_sqe fs/io_uring.c:6534 [inline] io_submit_sqes+0x2bbd/0x7c50 fs/io_uring.c:6660 __do_sys_io_uring_enter fs/io_uring.c:9240 [inline] __se_sys_io_uring_enter+0x256/0x1d60 fs/io_uring.c:9182 io_link_timeout_fn() should put only one reference of the linked timeout request, however in case of racing with the master request's completion first io_req_complete() puts one and then io_put_req_deferred() is called.

In the Linux kernel, the following vulnerability has been resolved: RDMA/ipoib: Fix warning caused by destroying non-initial netns After the commit 5ce2dced8e95 ("RDMA/ipoib: Set rtnl_link_ops for ipoib interfaces"), if the IPoIB device is moved to non-initial netns, destroying that netns lets the device vanish instead of moving it back to the initial netns, This is happening because default_device_exit() skips the interfaces due to having rtnl_link_ops set. Steps to reporoduce: ip netns add foo ip link set mlx5_ib0 netns foo ip netns delete foo WARNING: CPU: 1 PID: 704 at net/core/dev.c:11435 netdev_exit+0x3f/0x50 Modules linked in: xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 nft_compat nft_counter nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables nfnetlink tun d fuse CPU: 1 PID: 704 Comm: kworker/u64:3 Tainted: G S W 5.13.0-rc1+ #1 Hardware name: Dell Inc. PowerEdge R630/02C2CP, BIOS 2.1.5 04/11/2016 Workqueue: netns cleanup_net RIP: 0010:netdev_exit+0x3f/0x50 Code: 48 8b bb 30 01 00 00 e8 ef 81 b1 ff 48 81 fb c0 3a 54 a1 74 13 48 8b 83 90 00 00 00 48 81 c3 90 00 00 00 48 39 d8 75 02 5b c3 <0f> 0b 5b c3 66 66 2e 0f 1f 84 00 00 00 00 00 66 90 0f 1f 44 00 RSP: 0018:ffffb297079d7e08 EFLAGS: 00010206 RAX: ffff8eb542c00040 RBX: ffff8eb541333150 RCX: 000000008010000d RDX: 000000008010000e RSI: 000000008010000d RDI: ffff8eb440042c00 RBP: ffffb297079d7e48 R08: 0000000000000001 R09: ffffffff9fdeac00 R10: ffff8eb5003be000 R11: 0000000000000001 R12: ffffffffa1545620 R13: ffffffffa1545628 R14: 0000000000000000 R15: ffffffffa1543b20 FS: 0000000000000000(0000) GS:ffff8ed37fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005601b5f4c2e8 CR3: 0000001fc8c10002 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ops_exit_list.isra.9+0x36/0x70 cleanup_net+0x234/0x390 process_one_work+0x1cb/0x360 ? process_one_work+0x360/0x360 worker_thread+0x30/0x370 ? process_one_work+0x360/0x360 kthread+0x116/0x130 ? kthread_park+0x80/0x80 ret_from_fork+0x22/0x30 To avoid the above warning and later on the kernel panic that could happen on shutdown due to a NULL pointer dereference, make sure to set the netns_refund flag that was introduced by commit 3a5ca857079e ("can: dev: Move device back to init netns on owning netns delete") to properly restore the IPoIB interfaces to the initial netns.

In the Linux kernel, the following vulnerability has been resolved: perf trace: Really free the evsel->priv area In 3cb4d5e00e037c70 ("perf trace: Free syscall tp fields in evsel->priv") it only was freeing if strcmp(evsel->tp_format->system, "syscalls") returned zero, while the corresponding initialization of evsel->priv was being performed if it was _not_ zero, i.e. if the tp system wasn't 'syscalls'. Just stop looking for that and free it if evsel->priv was set, which should be equivalent. Also use the pre-existing evsel_trace__delete() function. This resolves these leaks, detected with: $ make EXTRA_CFLAGS="-fsanitize=address" BUILD_BPF_SKEL=1 CORESIGHT=1 O=/tmp/build/perf-tools-next -C tools/perf install-bin ================================================================= ==481565==ERROR: LeakSanitizer: detected memory leaks Direct leak of 40 byte(s) in 1 object(s) allocated from: #0 0x7f7343cba097 in calloc (/lib64/libasan.so.8+0xba097) #1 0x987966 in zalloc (/home/acme/bin/perf+0x987966) #2 0x52f9b9 in evsel_trace__new /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:307 #3 0x52f9b9 in evsel__syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:333 #4 0x52f9b9 in evsel__init_raw_syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:458 #5 0x52f9b9 in perf_evsel__raw_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:480 #6 0x540e8b in trace__add_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3212 #7 0x540e8b in trace__run /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3891 #8 0x540e8b in cmd_trace /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:5156 #9 0x5ef262 in run_builtin /home/acme/git/perf-tools-next/tools/perf/perf.c:323 #10 0x4196da in handle_internal_command /home/acme/git/perf-tools-next/tools/perf/perf.c:377 #11 0x4196da in run_argv /home/acme/git/perf-tools-next/tools/perf/perf.c:421 #12 0x4196da in main /home/acme/git/perf-tools-next/tools/perf/perf.c:537 #13 0x7f7342c4a50f in __libc_start_call_main (/lib64/libc.so.6+0x2750f) Direct leak of 40 byte(s) in 1 object(s) allocated from: #0 0x7f7343cba097 in calloc (/lib64/libasan.so.8+0xba097) #1 0x987966 in zalloc (/home/acme/bin/perf+0x987966) #2 0x52f9b9 in evsel_trace__new /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:307 #3 0x52f9b9 in evsel__syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:333 #4 0x52f9b9 in evsel__init_raw_syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:458 #5 0x52f9b9 in perf_evsel__raw_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:480 #6 0x540dd1 in trace__add_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3205 #7 0x540dd1 in trace__run /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3891 #8 0x540dd1 in cmd_trace /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:5156 #9 0x5ef262 in run_builtin /home/acme/git/perf-tools-next/tools/perf/perf.c:323 #10 0x4196da in handle_internal_command /home/acme/git/perf-tools-next/tools/perf/perf.c:377 #11 0x4196da in run_argv /home/acme/git/perf-tools-next/tools/perf/perf.c:421 #12 0x4196da in main /home/acme/git/perf-tools-next/tools/perf/perf.c:537 #13 0x7f7342c4a50f in __libc_start_call_main (/lib64/libc.so.6+0x2750f) SUMMARY: AddressSanitizer: 80 byte(s) leaked in 2 allocation(s). [root@quaco ~]# With this we plug all leaks with "perf trace sleep 1".

In the Linux kernel, the following vulnerability has been resolved: devlink: fix netns refcount leak in devlink_nl_cmd_reload() While preparing my patch series adding netns refcount tracking, I spotted bugs in devlink_nl_cmd_reload() Some error paths forgot to release a refcount on a netns. To fix this, we can reduce the scope of get_net()/put_net() section around the call to devlink_reload().

In the Linux kernel, the following vulnerability has been resolved: firmware: qcom: uefisecapp: Fix memory related IO errors and crashes It turns out that while the QSEECOM APP_SEND command has specific fields for request and response buffers, uefisecapp expects them both to be in a single memory region. Failure to adhere to this has (so far) resulted in either no response being written to the response buffer (causing an EIO to be emitted down the line), the SCM call to fail with EINVAL (i.e., directly from TZ/firmware), or the device to be hard-reset. While this issue can be triggered deterministically, in the current form it seems to happen rather sporadically (which is why it has gone unnoticed during earlier testing). This is likely due to the two kzalloc() calls (for request and response) being directly after each other. Which means that those likely return consecutive regions most of the time, especially when not much else is going on in the system. Fix this by allocating a single memory region for both request and response buffers, properly aligning both structs inside it. This unfortunately also means that the qcom_scm_qseecom_app_send() interface needs to be restructured, as it should no longer map the DMA regions separately. Therefore, move the responsibility of DMA allocation (or mapping) to the caller.

In the Linux kernel, the following vulnerability has been resolved: usb: udc: remove warning when queue disabled ep It is possible trigger below warning message from mass storage function, WARNING: CPU: 6 PID: 3839 at drivers/usb/gadget/udc/core.c:294 usb_ep_queue+0x7c/0x104 pc : usb_ep_queue+0x7c/0x104 lr : fsg_main_thread+0x494/0x1b3c Root cause is mass storage function try to queue request from main thread, but other thread may already disable ep when function disable. As there is no function failure in the driver, in order to avoid effort to fix warning, change WARN_ON_ONCE() in usb_ep_queue() to pr_debug().

In the Linux kernel, the following vulnerability has been resolved: mac80211: validate extended element ID is present Before attempting to parse an extended element, verify that the extended element ID is present.

In the Linux kernel, the following vulnerability has been resolved: dpll: fix pin dump crash for rebound module When a kernel module is unbound but the pin resources were not entirely freed (other kernel module instance of the same PCI device have had kept the reference to that pin), and kernel module is again bound, the pin properties would not be updated (the properties are only assigned when memory for the pin is allocated), prop pointer still points to the kernel module memory of the kernel module which was deallocated on the unbind. If the pin dump is invoked in this state, the result is a kernel crash. Prevent the crash by storing persistent pin properties in dpll subsystem, copy the content from the kernel module when pin is allocated, instead of using memory of the kernel module.

In the Linux kernel, the following vulnerability has been resolved: iavf: free q_vectors before queues in iavf_disable_vf iavf_free_queues() clears adapter->num_active_queues, which iavf_free_q_vectors() relies on, so swap the order of these two function calls in iavf_disable_vf(). This resolves a panic encountered when the interface is disabled and then later brought up again after PF communication is restored.

In the Linux kernel, the following vulnerability has been resolved: dm-raid: really frozen sync_thread during suspend 1) commit f52f5c71f3d4 ("md: fix stopping sync thread") remove MD_RECOVERY_FROZEN from __md_stop_writes() and doesn't realize that dm-raid relies on __md_stop_writes() to frozen sync_thread indirectly. Fix this problem by adding MD_RECOVERY_FROZEN in md_stop_writes(), and since stop_sync_thread() is only used for dm-raid in this case, also move stop_sync_thread() to md_stop_writes(). 2) The flag MD_RECOVERY_FROZEN doesn't mean that sync thread is frozen, it only prevent new sync_thread to start, and it can't stop the running sync thread; In order to frozen sync_thread, after seting the flag, stop_sync_thread() should be used. 3) The flag MD_RECOVERY_FROZEN doesn't mean that writes are stopped, use it as condition for md_stop_writes() in raid_postsuspend() doesn't look correct. Consider that reentrant stop_sync_thread() do nothing, always call md_stop_writes() in raid_postsuspend(). 4) raid_message can set/clear the flag MD_RECOVERY_FROZEN at anytime, and if MD_RECOVERY_FROZEN is cleared while the array is suspended, new sync_thread can start unexpected. Fix this by disallow raid_message() to change sync_thread status during suspend. Note that after commit f52f5c71f3d4 ("md: fix stopping sync thread"), the test shell/lvconvert-raid-reshape.sh start to hang in stop_sync_thread(), and with previous fixes, the test won't hang there anymore, however, the test will still fail and complain that ext4 is corrupted. And with this patch, the test won't hang due to stop_sync_thread() or fail due to ext4 is corrupted anymore. However, there is still a deadlock related to dm-raid456 that will be fixed in following patches.

In the Linux kernel, the following vulnerability has been resolved: ubifs: rename_whiteout: Fix double free for whiteout_ui->data 'whiteout_ui->data' will be freed twice if space budget fail for rename whiteout operation as following process: rename_whiteout dev = kmalloc whiteout_ui->data = dev kfree(whiteout_ui->data) // Free first time iput(whiteout) ubifs_free_inode kfree(ui->data) // Double free! KASAN reports: ================================================================== BUG: KASAN: double-free or invalid-free in ubifs_free_inode+0x4f/0x70 Call Trace: kfree+0x117/0x490 ubifs_free_inode+0x4f/0x70 [ubifs] i_callback+0x30/0x60 rcu_do_batch+0x366/0xac0 __do_softirq+0x133/0x57f Allocated by task 1506: kmem_cache_alloc_trace+0x3c2/0x7a0 do_rename+0x9b7/0x1150 [ubifs] ubifs_rename+0x106/0x1f0 [ubifs] do_syscall_64+0x35/0x80 Freed by task 1506: kfree+0x117/0x490 do_rename.cold+0x53/0x8a [ubifs] ubifs_rename+0x106/0x1f0 [ubifs] do_syscall_64+0x35/0x80 The buggy address belongs to the object at ffff88810238bed8 which belongs to the cache kmalloc-8 of size 8 ================================================================== Let ubifs_free_inode() free 'whiteout_ui->data'. BTW, delete unused assignment 'whiteout_ui->data_len = 0', process 'ubifs_evict_inode() -> ubifs_jnl_delete_inode() -> ubifs_jnl_write_inode()' doesn't need it (because 'inc_nlink(whiteout)' won't be excuted by 'goto out_release', and the nlink of whiteout inode is 0).

In the Linux kernel, the following vulnerability has been resolved: mac80211-hwsim: fix late beacon hrtimer handling Thomas explained in https://lore.kernel.org/r/87mtoeb4hb.ffs@tglx that our handling of the hrtimer here is wrong: If the timer fires late (e.g. due to vCPU scheduling, as reported by Dmitry/syzbot) then it tries to actually rearm the timer at the next deadline, which might be in the past already: 1 2 3 N N+1 | | | ... | | ^ intended to fire here (1) ^ next deadline here (2) ^ actually fired here The next time it fires, it's later, but will still try to schedule for the next deadline (now 3), etc. until it catches up with N, but that might take a long time, causing stalls etc. Now, all of this is simulation, so we just have to fix it, but note that the behaviour is wrong even per spec, since there's no value then in sending all those beacons unaligned - they should be aligned to the TBTT (1, 2, 3, ... in the picture), and if we're a bit (or a lot) late, then just resume at that point. Therefore, change the code to use hrtimer_forward_now() which will ensure that the next firing of the timer would be at N+1 (in the picture), i.e. the next interval point after the current time.

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix deadlock when aborting transaction during relocation with scrub Before relocating a block group we pause scrub, then do the relocation and then unpause scrub. The relocation process requires starting and committing a transaction, and if we have a failure in the critical section of the transaction commit path (transaction state >= TRANS_STATE_COMMIT_START), we will deadlock if there is a paused scrub. That results in stack traces like the following: [42.479] BTRFS info (device sdc): relocating block group 53876686848 flags metadata|raid6 [42.936] BTRFS warning (device sdc): Skipping commit of aborted transaction. [42.936] ------------[ cut here ]------------ [42.936] BTRFS: Transaction aborted (error -28) [42.936] WARNING: CPU: 11 PID: 346822 at fs/btrfs/transaction.c:1977 btrfs_commit_transaction+0xcc8/0xeb0 [btrfs] [42.936] Modules linked in: dm_flakey dm_mod loop btrfs (...) [42.936] CPU: 11 PID: 346822 Comm: btrfs Tainted: G W 6.3.0-rc2-btrfs-next-127+ #1 [42.936] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [42.936] RIP: 0010:btrfs_commit_transaction+0xcc8/0xeb0 [btrfs] [42.936] Code: ff ff 45 8b (...) [42.936] RSP: 0018:ffffb58649633b48 EFLAGS: 00010282 [42.936] RAX: 0000000000000000 RBX: ffff8be6ef4d5bd8 RCX: 0000000000000000 [42.936] RDX: 0000000000000002 RSI: ffffffffb35e7782 RDI: 00000000ffffffff [42.936] RBP: ffff8be6ef4d5c98 R08: 0000000000000000 R09: ffffb586496339e8 [42.936] R10: 0000000000000001 R11: 0000000000000001 R12: ffff8be6d38c7c00 [42.936] R13: 00000000ffffffe4 R14: ffff8be6c268c000 R15: ffff8be6ef4d5cf0 [42.936] FS: 00007f381a82b340(0000) GS:ffff8beddfcc0000(0000) knlGS:0000000000000000 [42.936] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [42.936] CR2: 00007f1e35fb7638 CR3: 0000000117680006 CR4: 0000000000370ee0 [42.936] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [42.936] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [42.936] Call Trace: [42.936] <TASK> [42.936] ? start_transaction+0xcb/0x610 [btrfs] [42.936] prepare_to_relocate+0x111/0x1a0 [btrfs] [42.936] relocate_block_group+0x57/0x5d0 [btrfs] [42.936] ? btrfs_wait_nocow_writers+0x25/0xb0 [btrfs] [42.936] btrfs_relocate_block_group+0x248/0x3c0 [btrfs] [42.936] ? __pfx_autoremove_wake_function+0x10/0x10 [42.936] btrfs_relocate_chunk+0x3b/0x150 [btrfs] [42.936] btrfs_balance+0x8ff/0x11d0 [btrfs] [42.936] ? __kmem_cache_alloc_node+0x14a/0x410 [42.936] btrfs_ioctl+0x2334/0x32c0 [btrfs] [42.937] ? mod_objcg_state+0xd2/0x360 [42.937] ? refill_obj_stock+0xb0/0x160 [42.937] ? seq_release+0x25/0x30 [42.937] ? __rseq_handle_notify_resume+0x3b5/0x4b0 [42.937] ? percpu_counter_add_batch+0x2e/0xa0 [42.937] ? __x64_sys_ioctl+0x88/0xc0 [42.937] __x64_sys_ioctl+0x88/0xc0 [42.937] do_syscall_64+0x38/0x90 [42.937] entry_SYSCALL_64_after_hwframe+0x72/0xdc [42.937] RIP: 0033:0x7f381a6ffe9b [42.937] Code: 00 48 89 44 24 (...) [42.937] RSP: 002b:00007ffd45ecf060 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [42.937] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f381a6ffe9b [42.937] RDX: 00007ffd45ecf150 RSI: 00000000c4009420 RDI: 0000000000000003 [42.937] RBP: 0000000000000003 R08: 0000000000000013 R09: 0000000000000000 [42.937] R10: 00007f381a60c878 R11: 0000000000000246 R12: 00007ffd45ed0423 [42.937] R13: 00007ffd45ecf150 R14: 0000000000000000 R15: 00007ffd45ecf148 [42.937] </TASK> [42.937] ---[ end trace 0000000000000000 ]--- [42.937] BTRFS: error (device sdc: state A) in cleanup_transaction:1977: errno=-28 No space left [59.196] INFO: task btrfs:346772 blocked for more than 120 seconds. [59.196] Tainted: G W 6.3.0-rc2-btrfs-next-127+ #1 [59.196] "echo 0 > /proc/sys/kernel/hung_ ---truncated---

In the Linux kernel, the following vulnerability has been resolved: Drivers: hv: vmbus: Don't dereference ACPI root object handle Since the commit referenced in the Fixes: tag below the VMBus client driver is walking the ACPI namespace up from the VMBus ACPI device to the ACPI namespace root object trying to find Hyper-V MMIO ranges. However, if it is not able to find them it ends trying to walk resources of the ACPI namespace root object itself. This object has all-ones handle, which causes a NULL pointer dereference in the ACPI code (from dereferencing this pointer with an offset). This in turn causes an oops on boot with VMBus host implementations that do not provide Hyper-V MMIO ranges in their VMBus ACPI device or its ancestors. The QEMU VMBus implementation is an example of such implementation. I guess providing these ranges is optional, since all tested Windows versions seem to be able to use VMBus devices without them. Fix this by explicitly terminating the lookup at the ACPI namespace root object. Note that Linux guests under KVM/QEMU do not use the Hyper-V PV interface by default - they only do so if the KVM PV interface is missing or disabled. Example stack trace of such oops: [ 3.710827] ? __die+0x1f/0x60 [ 3.715030] ? page_fault_oops+0x159/0x460 [ 3.716008] ? exc_page_fault+0x73/0x170 [ 3.716959] ? asm_exc_page_fault+0x22/0x30 [ 3.717957] ? acpi_ns_lookup+0x7a/0x4b0 [ 3.718898] ? acpi_ns_internalize_name+0x79/0xc0 [ 3.720018] acpi_ns_get_node_unlocked+0xb5/0xe0 [ 3.721120] ? acpi_ns_check_object_type+0xfe/0x200 [ 3.722285] ? acpi_rs_convert_aml_to_resource+0x37/0x6e0 [ 3.723559] ? down_timeout+0x3a/0x60 [ 3.724455] ? acpi_ns_get_node+0x3a/0x60 [ 3.725412] acpi_ns_get_node+0x3a/0x60 [ 3.726335] acpi_ns_evaluate+0x1c3/0x2c0 [ 3.727295] acpi_ut_evaluate_object+0x64/0x1b0 [ 3.728400] acpi_rs_get_method_data+0x2b/0x70 [ 3.729476] ? vmbus_platform_driver_probe+0x1d0/0x1d0 [hv_vmbus] [ 3.730940] ? vmbus_platform_driver_probe+0x1d0/0x1d0 [hv_vmbus] [ 3.732411] acpi_walk_resources+0x78/0xd0 [ 3.733398] vmbus_platform_driver_probe+0x9f/0x1d0 [hv_vmbus] [ 3.734802] platform_probe+0x3d/0x90 [ 3.735684] really_probe+0x19b/0x400 [ 3.736570] ? __device_attach_driver+0x100/0x100 [ 3.737697] __driver_probe_device+0x78/0x160 [ 3.738746] driver_probe_device+0x1f/0x90 [ 3.739743] __driver_attach+0xc2/0x1b0 [ 3.740671] bus_for_each_dev+0x70/0xc0 [ 3.741601] bus_add_driver+0x10e/0x210 [ 3.742527] driver_register+0x55/0xf0 [ 3.744412] ? 0xffffffffc039a000 [ 3.745207] hv_acpi_init+0x3c/0x1000 [hv_vmbus]

In the Linux kernel, the following vulnerability has been resolved: dma-debug: prevent an error message from causing runtime problems For some drivers, that use the DMA API. This error message can be reached several millions of times per second, causing spam to the kernel's printk buffer and bringing the CPU usage up to 100% (so, it should be rate limited). However, since there is at least one driver that is in the mainline and suffers from the error condition, it is more useful to err_printk() here instead of just rate limiting the error message (in hopes that it will make it easier for other drivers that suffer from this issue to be spotted).

In the Linux kernel, the following vulnerability has been resolved: ALSA: gus: fix null pointer dereference on pointer block The pointer block return from snd_gf1_dma_next_block could be null, so there is a potential null pointer dereference issue. Fix this by adding a null check before dereference.

In the Linux kernel, the following vulnerability has been resolved: ethtool: ioctl: fix potential NULL deref in ethtool_set_coalesce() ethtool_set_coalesce() now uses both the .get_coalesce() and .set_coalesce() callbacks. But the check for their availability is buggy, so changing the coalesce settings on a device where the driver provides only _one_ of the callbacks results in a NULL pointer dereference instead of an -EOPNOTSUPP. Fix the condition so that the availability of both callbacks is ensured. This also matches the netlink code. Note that reproducing this requires some effort - it only affects the legacy ioctl path, and needs a specific combination of driver options: - have .get_coalesce() and .coalesce_supported but no .set_coalesce(), or - have .set_coalesce() but no .get_coalesce(). Here eg. ethtool doesn't cause the crash as it first attempts to call ethtool_get_coalesce() and bails out on error.

In the Linux kernel, the following vulnerability has been resolved: accel/qaic: Fix a leak in map_user_pages() If get_user_pages_fast() allocates some pages but not as many as we wanted, then the current code leaks those pages. Call put_page() on the pages before returning.

In the Linux kernel, the following vulnerability has been resolved: phy: mdio: fix memory leak Syzbot reported memory leak in MDIO bus interface, the problem was in wrong state logic. MDIOBUS_ALLOCATED indicates 2 states: 1. Bus is only allocated 2. Bus allocated and __mdiobus_register() fails, but device_register() was called In case of device_register() has been called we should call put_device() to correctly free the memory allocated for this device, but mdiobus_free() calls just kfree(dev) in case of MDIOBUS_ALLOCATED state To avoid this behaviour we need to set bus->state to MDIOBUS_UNREGISTERED _before_ calling device_register(), because put_device() should be called even in case of device_register() failure.

In the Linux kernel, the following vulnerability has been resolved: i40e: Fix NULL pointer dereference in i40e_dbg_dump_desc When trying to dump VFs VSI RX/TX descriptors using debugfs there was a crash due to NULL pointer dereference in i40e_dbg_dump_desc. Added a check to i40e_dbg_dump_desc that checks if VSI type is correct for dumping RX/TX descriptors.

In the Linux kernel, the following vulnerability has been resolved: ubifs: Fix deadlock in concurrent rename whiteout and inode writeback Following hung tasks: [ 77.028764] task:kworker/u8:4 state:D stack: 0 pid: 132 [ 77.028820] Call Trace: [ 77.029027] schedule+0x8c/0x1b0 [ 77.029067] mutex_lock+0x50/0x60 [ 77.029074] ubifs_write_inode+0x68/0x1f0 [ubifs] [ 77.029117] __writeback_single_inode+0x43c/0x570 [ 77.029128] writeback_sb_inodes+0x259/0x740 [ 77.029148] wb_writeback+0x107/0x4d0 [ 77.029163] wb_workfn+0x162/0x7b0 [ 92.390442] task:aa state:D stack: 0 pid: 1506 [ 92.390448] Call Trace: [ 92.390458] schedule+0x8c/0x1b0 [ 92.390461] wb_wait_for_completion+0x82/0xd0 [ 92.390469] __writeback_inodes_sb_nr+0xb2/0x110 [ 92.390472] writeback_inodes_sb_nr+0x14/0x20 [ 92.390476] ubifs_budget_space+0x705/0xdd0 [ubifs] [ 92.390503] do_rename.cold+0x7f/0x187 [ubifs] [ 92.390549] ubifs_rename+0x8b/0x180 [ubifs] [ 92.390571] vfs_rename+0xdb2/0x1170 [ 92.390580] do_renameat2+0x554/0x770 , are caused by concurrent rename whiteout and inode writeback processes: rename_whiteout(Thread 1) wb_workfn(Thread2) ubifs_rename do_rename lock_4_inodes (Hold ui_mutex) ubifs_budget_space make_free_space shrink_liability __writeback_inodes_sb_nr bdi_split_work_to_wbs (Queue new wb work) wb_do_writeback(wb work) __writeback_single_inode ubifs_write_inode LOCK(ui_mutex) ↑ wb_wait_for_completion (Wait wb work) <-- deadlock! Reproducer (Detail program in [Link]): 1. SYS_renameat2("/mp/dir/file", "/mp/dir/whiteout", RENAME_WHITEOUT) 2. Consume out of space before kernel(mdelay) doing budget for whiteout Fix it by doing whiteout space budget before locking ubifs inodes. BTW, it also fixes wrong goto tag 'out_release' in whiteout budget error handling path(It should at least recover dir i_size and unlock 4 ubifs inodes).

In the Linux kernel, the following vulnerability has been resolved: RDMA/cma: Fix listener leak in rdma_cma_listen_on_all() failure If cma_listen_on_all() fails it leaves the per-device ID still on the listen_list but the state is not set to RDMA_CM_ADDR_BOUND. When the cmid is eventually destroyed cma_cancel_listens() is not called due to the wrong state, however the per-device IDs are still holding the refcount preventing the ID from being destroyed, thus deadlocking: task:rping state:D stack: 0 pid:19605 ppid: 47036 flags:0x00000084 Call Trace: __schedule+0x29a/0x780 ? free_unref_page_commit+0x9b/0x110 schedule+0x3c/0xa0 schedule_timeout+0x215/0x2b0 ? __flush_work+0x19e/0x1e0 wait_for_completion+0x8d/0xf0 _destroy_id+0x144/0x210 [rdma_cm] ucma_close_id+0x2b/0x40 [rdma_ucm] __destroy_id+0x93/0x2c0 [rdma_ucm] ? __xa_erase+0x4a/0xa0 ucma_destroy_id+0x9a/0x120 [rdma_ucm] ucma_write+0xb8/0x130 [rdma_ucm] vfs_write+0xb4/0x250 ksys_write+0xb5/0xd0 ? syscall_trace_enter.isra.19+0x123/0x190 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Ensure that cma_listen_on_all() atomically unwinds its action under the lock during error.

In the Linux kernel, the following vulnerability has been resolved: netfilter: conntrack: fix wrong ct->timeout value (struct nf_conn)->timeout is an interval before the conntrack confirmed. After confirmed, it becomes a timestamp. It is observed that timeout of an unconfirmed conntrack: - Set by calling ctnetlink_change_timeout(). As a result, `nfct_time_stamp` was wrongly added to `ct->timeout` twice. - Get by calling ctnetlink_dump_timeout(). As a result, `nfct_time_stamp` was wrongly subtracted. Call Trace: <TASK> dump_stack_lvl ctnetlink_dump_timeout __ctnetlink_glue_build ctnetlink_glue_build __nfqnl_enqueue_packet nf_queue nf_hook_slow ip_mc_output ? __pfx_ip_finish_output ip_send_skb ? __pfx_dst_output udp_send_skb udp_sendmsg ? __pfx_ip_generic_getfrag sock_sendmsg Separate the 2 cases in: - Setting `ct->timeout` in __nf_ct_set_timeout(). - Getting `ct->timeout` in ctnetlink_dump_timeout(). Pablo appends: Update ctnetlink to set up the timeout _after_ the IPS_CONFIRMED flag is set on, otherwise conntrack creation via ctnetlink breaks. Note that the problem described in this patch occurs since the introduction of the nfnetlink_queue conntrack support, select a sufficiently old Fixes: tag for -stable kernel to pick up this fix.

In the Linux kernel, the following vulnerability has been resolved: regulator: rt4801: Fix NULL pointer dereference if priv->enable_gpios is NULL devm_gpiod_get_array_optional may return NULL if no GPIO was assigned.

In the Linux kernel, the following vulnerability has been resolved: iio: accel: kxcjk-1013: Fix possible memory leak in probe and remove When ACPI type is ACPI_SMO8500, the data->dready_trig will not be set, the memory allocated by iio_triggered_buffer_setup() will not be freed, and cause memory leak as follows: unreferenced object 0xffff888009551400 (size 512): comm "i2c-SMO8500-125", pid 911, jiffies 4294911787 (age 83.852s) hex dump (first 32 bytes): 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 20 e2 e5 c0 ff ff ff ff ........ ....... backtrace: [<0000000041ce75ee>] kmem_cache_alloc_trace+0x16d/0x360 [<000000000aeb17b0>] iio_kfifo_allocate+0x41/0x130 [kfifo_buf] [<000000004b40c1f5>] iio_triggered_buffer_setup_ext+0x2c/0x210 [industrialio_triggered_buffer] [<000000004375b15f>] kxcjk1013_probe+0x10c3/0x1d81 [kxcjk_1013] Fix it by remove data->dready_trig condition in probe and remove.

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: fix potential leak in rtw89_append_probe_req_ie() Do `kfree_skb(new)` before `goto out` to prevent potential leak.

In the Linux kernel, the following vulnerability has been resolved: serial: liteuart: fix minor-number leak on probe errors Make sure to release the allocated minor number before returning on probe errors.

In the Linux kernel, the following vulnerability has been resolved: USB: isp1362: fix memory leak with using debugfs_lookup() When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.

In the Linux kernel, the following vulnerability has been resolved: jfs: fix GPF in diFree Avoid passing inode with JFS_SBI(inode->i_sb)->ipimap == NULL to diFree()[1]. GFP will appear: struct inode *ipimap = JFS_SBI(ip->i_sb)->ipimap; struct inomap *imap = JFS_IP(ipimap)->i_imap; JFS_IP() will return invalid pointer when ipimap == NULL Call Trace: diFree+0x13d/0x2dc0 fs/jfs/jfs_imap.c:853 [1] jfs_evict_inode+0x2c9/0x370 fs/jfs/inode.c:154 evict+0x2ed/0x750 fs/inode.c:578 iput_final fs/inode.c:1654 [inline] iput.part.0+0x3fe/0x820 fs/inode.c:1680 iput+0x58/0x70 fs/inode.c:1670

In the Linux kernel, the following vulnerability has been resolved: serial: liteuart: Fix NULL pointer dereference in ->remove() drvdata has to be set in _probe() - otherwise platform_get_drvdata() causes null pointer dereference BUG in _remove().

In the Linux kernel, the following vulnerability has been resolved: bpf: Add oversize check before call kvcalloc() Commit 7661809d493b ("mm: don't allow oversized kvmalloc() calls") add the oversize check. When the allocation is larger than what kmalloc() supports, the following warning triggered: WARNING: CPU: 0 PID: 8408 at mm/util.c:597 kvmalloc_node+0x108/0x110 mm/util.c:597 Modules linked in: CPU: 0 PID: 8408 Comm: syz-executor221 Not tainted 5.14.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:kvmalloc_node+0x108/0x110 mm/util.c:597 Call Trace: kvmalloc include/linux/mm.h:806 [inline] kvmalloc_array include/linux/mm.h:824 [inline] kvcalloc include/linux/mm.h:829 [inline] check_btf_line kernel/bpf/verifier.c:9925 [inline] check_btf_info kernel/bpf/verifier.c:10049 [inline] bpf_check+0xd634/0x150d0 kernel/bpf/verifier.c:13759 bpf_prog_load kernel/bpf/syscall.c:2301 [inline] __sys_bpf+0x11181/0x126e0 kernel/bpf/syscall.c:4587 __do_sys_bpf kernel/bpf/syscall.c:4691 [inline] __se_sys_bpf kernel/bpf/syscall.c:4689 [inline] __x64_sys_bpf+0x78/0x90 kernel/bpf/syscall.c:4689 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae

In the Linux kernel, the following vulnerability has been resolved: media: ov2740: Fix memleak in ov2740_init_controls() There is a kmemleak when testing the media/i2c/ov2740.c with bpf mock device: unreferenced object 0xffff8881090e19e0 (size 16): comm "51-i2c-ov2740", pid 278, jiffies 4294781584 (age 23.613s) hex dump (first 16 bytes): 00 f3 7c 0b 81 88 ff ff 80 75 6a 09 81 88 ff ff ..|......uj..... backtrace: [<000000004e9fad8f>] __kmalloc_node+0x44/0x1b0 [<0000000039c802f4>] kvmalloc_node+0x34/0x180 [<000000009b8b5c63>] v4l2_ctrl_handler_init_class+0x11d/0x180 [videodev] [<0000000038644056>] ov2740_probe+0x37d/0x84f [ov2740] [<0000000092489f59>] i2c_device_probe+0x28d/0x680 [<000000001038babe>] really_probe+0x17c/0x3f0 [<0000000098c7af1c>] __driver_probe_device+0xe3/0x170 [<00000000e1b3dc24>] device_driver_attach+0x34/0x80 [<000000005a04a34d>] bind_store+0x10b/0x1a0 [<00000000ce25d4f2>] drv_attr_store+0x49/0x70 [<000000007d9f4e9a>] sysfs_kf_write+0x8c/0xb0 [<00000000be6cff0f>] kernfs_fop_write_iter+0x216/0x2e0 [<0000000031ddb40a>] vfs_write+0x658/0x810 [<0000000041beecdd>] ksys_write+0xd6/0x1b0 [<0000000023755840>] do_syscall_64+0x38/0x90 [<00000000b2cc2da2>] entry_SYSCALL_64_after_hwframe+0x63/0xcd ov2740_init_controls() won't clean all the allocated resources in fail path, which may causes the memleaks. Add v4l2_ctrl_handler_free() to prevent memleak.

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: fix memory leak in rtw_usb_probe() drivers/net/wireless/realtek/rtw88/usb.c:876 rtw_usb_probe() warn: 'hw' from ieee80211_alloc_hw() not released on lines: 811 Fix this by modifying return to a goto statement.

In the Linux kernel, the following vulnerability has been resolved: gpio: wcd934x: Fix shift-out-of-bounds error bit-mask for pins 0 to 4 is BIT(0) to BIT(4) however we ended up with BIT(n - 1) which is not right, and this was caught by below usban check UBSAN: shift-out-of-bounds in drivers/gpio/gpio-wcd934x.c:34:14

In the Linux kernel, the following vulnerability has been resolved: USB: chipidea: fix memory leak with using debugfs_lookup() When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.

In the Linux kernel, the following vulnerability has been resolved: can: m_can: m_can_read_fifo: fix memory leak in error branch In m_can_read_fifo(), if the second call to m_can_fifo_read() fails, the function jump to the out_fail label and returns without calling m_can_receive_skb(). This means that the skb previously allocated by alloc_can_skb() is not freed. In other terms, this is a memory leak. This patch adds a goto label to destroy the skb if an error occurs. Issue was found with GCC -fanalyzer, please follow the link below for details.

In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix rxrpc_local leak in rxrpc_lookup_peer() Need to call rxrpc_put_local() for peer candidate before kfree() as it holds a ref to rxrpc_local. [DH: v2: Changed to abstract the peer freeing code out into a function]

In the Linux kernel, the following vulnerability has been resolved: samples/landlock: Fix path_list memory leak Clang static analysis reports this error sandboxer.c:134:8: warning: Potential leak of memory pointed to by 'path_list' ret = 0; ^ path_list is allocated in parse_path() but never freed.

In the Linux kernel, the following vulnerability has been resolved: cifs: fix mid leak during reconnection after timeout threshold When the number of responses with status of STATUS_IO_TIMEOUT exceeds a specified threshold (NUM_STATUS_IO_TIMEOUT), we reconnect the connection. But we do not return the mid, or the credits returned for the mid, or reduce the number of in-flight requests. This bug could result in the server->in_flight count to go bad, and also cause a leak in the mids. This change moves the check to a few lines below where the response is decrypted, even of the response is read from the transform header. This way, the code for returning the mids can be reused. Also, the cifs_reconnect was reconnecting just the transport connection before. In case of multi-channel, this may not be what we want to do after several timeouts. Changed that to reconnect the session and the tree too. Also renamed NUM_STATUS_IO_TIMEOUT to a more appropriate name MAX_STATUS_IO_TIMEOUT.

In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix sysfs interface lifetime The current nilfs2 sysfs support has issues with the timing of creation and deletion of sysfs entries, potentially leading to null pointer dereferences, use-after-free, and lockdep warnings. Some of the sysfs attributes for nilfs2 per-filesystem instance refer to metadata file "cpfile", "sufile", or "dat", but nilfs_sysfs_create_device_group that creates those attributes is executed before the inodes for these metadata files are loaded, and nilfs_sysfs_delete_device_group which deletes these sysfs entries is called after releasing their metadata file inodes. Therefore, access to some of these sysfs attributes may occur outside of the lifetime of these metadata files, resulting in inode NULL pointer dereferences or use-after-free. In addition, the call to nilfs_sysfs_create_device_group() is made during the locking period of the semaphore "ns_sem" of nilfs object, so the shrinker call caused by the memory allocation for the sysfs entries, may derive lock dependencies "ns_sem" -> (shrinker) -> "locks acquired in nilfs_evict_inode()". Since nilfs2 may acquire "ns_sem" deep in the call stack holding other locks via its error handler __nilfs_error(), this causes lockdep to report circular locking. This is a false positive and no circular locking actually occurs as no inodes exist yet when nilfs_sysfs_create_device_group() is called. Fortunately, the lockdep warnings can be resolved by simply moving the call to nilfs_sysfs_create_device_group() out of "ns_sem". This fixes these sysfs issues by revising where the device's sysfs interface is created/deleted and keeping its lifetime within the lifetime of the metadata files above.

In the Linux kernel, the following vulnerability has been resolved: spi: fsl-lpspi: Fix PM reference leak in lpspi_prepare_xfer_hardware() pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to putting operation will result in reference leak here. Fix it by replacing it with pm_runtime_resume_and_get to keep usage counter balanced.

In the Linux kernel, the following vulnerability has been resolved: net: fec: fix the potential memory leak in fec_enet_init() If the memory allocated for cbd_base is failed, it should free the memory allocated for the queues, otherwise it causes memory leak. And if the memory allocated for the queues is failed, it can return error directly.

In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Fix list_add() corruption in lpfc_drain_txq() When parsing the txq list in lpfc_drain_txq(), the driver attempts to pass the requests to the adapter. If such an attempt fails, a local "fail_msg" string is set and a log message output. The job is then added to a completions list for cancellation. Processing of any further jobs from the txq list continues, but since "fail_msg" remains set, jobs are added to the completions list regardless of whether a wqe was passed to the adapter. If successfully added to txcmplq, jobs are added to both lists resulting in list corruption. Fix by clearing the fail_msg string after adding a job to the completions list. This stops the subsequent jobs from being added to the completions list unless they had an appropriate failure.

In the Linux kernel, the following vulnerability has been resolved: media: staging: media: zoran: move videodev alloc Move some code out of zr36057_init() and create new functions for handling zr->video_dev. This permit to ease code reading and fix a zr->video_dev memory leak.

In the Linux kernel, the following vulnerability has been resolved: ASoC: soc-compress: prevent the potentially use of null pointer There is one call trace that snd_soc_register_card() ->snd_soc_bind_card()->soc_init_pcm_runtime() ->snd_soc_dai_compress_new()->snd_soc_new_compress(). In the trace the 'codec_dai' transfers from card->dai_link, and we can see from the snd_soc_add_pcm_runtime() in snd_soc_bind_card() that, if value of card->dai_link->num_codecs is 0, then 'codec_dai' could be null pointer caused by index out of bound in 'asoc_rtd_to_codec(rtd, 0)'. And snd_soc_register_card() is called by various platforms. Therefore, it is better to add the check in the case of misusing. And because 'cpu_dai' has already checked in soc_init_pcm_runtime(), there is no need to check again. Adding the check as follow, then if 'codec_dai' is null, snd_soc_new_compress() will not pass through the check 'if (playback + capture != 1)', avoiding the leftover use of 'codec_dai'.

In the Linux kernel, the following vulnerability has been resolved: scsi: iscsi_tcp: Check that sock is valid before iscsi_set_param() The validity of sock should be checked before assignment to avoid incorrect values. Commit 57569c37f0ad ("scsi: iscsi: iscsi_tcp: Fix null-ptr-deref while calling getpeername()") introduced this change which may lead to inconsistent values of tcp_sw_conn->sendpage and conn->datadgst_en. Fix the issue by moving the position of the assignment.

In the Linux kernel, the following vulnerability has been resolved: nfp: Fix memory leak in nfp_cpp_area_cache_add() In line 800 (#1), nfp_cpp_area_alloc() allocates and initializes a CPP area structure. But in line 807 (#2), when the cache is allocated failed, this CPP area structure is not freed, which will result in memory leak. We can fix it by freeing the CPP area when the cache is allocated failed (#2). 792 int nfp_cpp_area_cache_add(struct nfp_cpp *cpp, size_t size) 793 { 794 struct nfp_cpp_area_cache *cache; 795 struct nfp_cpp_area *area; 800 area = nfp_cpp_area_alloc(cpp, NFP_CPP_ID(7, NFP_CPP_ACTION_RW, 0), 801 0, size); // #1: allocates and initializes 802 if (!area) 803 return -ENOMEM; 805 cache = kzalloc(sizeof(*cache), GFP_KERNEL); 806 if (!cache) 807 return -ENOMEM; // #2: missing free 817 return 0; 818 }

In the Linux kernel, the following vulnerability has been resolved: usb: musb: tusb6010: check return value after calling platform_get_resource() It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value.

In the Linux kernel, the following vulnerability has been resolved: ext4: fix memory leak in ext4_fill_super Buffer head references must be released before calling kill_bdev(); otherwise the buffer head (and its page referenced by b_data) will not be freed by kill_bdev, and subsequently that bh will be leaked. If blocksizes differ, sb_set_blocksize() will kill current buffers and page cache by using kill_bdev(). And then super block will be reread again but using correct blocksize this time. sb_set_blocksize() didn't fully free superblock page and buffer head, and being busy, they were not freed and instead leaked. This can easily be reproduced by calling an infinite loop of: systemctl start <ext4_on_lvm>.mount, and systemctl stop <ext4_on_lvm>.mount ... since systemd creates a cgroup for each slice which it mounts, and the bh leak get amplified by a dying memory cgroup that also never gets freed, and memory consumption is much more easily noticed.