Tenda AX1803 v1.0.0.1 was discovered to contain a heap overflow in the function GetParentControlInfo.

Those using Jettison to parse untrusted XML or JSON data may be vulnerable to Denial of Service attacks (DOS). If the parser is running on user supplied input, an attacker may supply content that causes the parser to crash by stackoverflow. This effect may support a denial of service attack.

Tenda i9 v1.0.0.8(3828) was discovered to contain a buffer overflow via the set_local_time function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted string.

Tenda i9 v1.0.0.8(3828) was discovered to contain a buffer overflow via the formwrlSSIDget function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted string.

Tenda i9 v1.0.0.8(3828) was discovered to contain a buffer overflow via the formexeCommand function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted string.

A vulnerability was determined in Nothings stb up to 1.26. The affected element is the function stbtt__buf_get8 in the library stb_truetype.h of the component TTF File Handler. Executing a manipulation can lead to out-of-bounds read. The attack can be executed remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.

WASM3 v0.5.0 was discovered to contain a segmentation fault via the component op_Select_i32_srs in wasm3/source/m3_exec.h.

Tenda M3 V1.0.0.12(4856) was discovered to contain a heap buffer overflow vulnerability in the function formSetFixTools. This vulnerability allows attackers to cause a Denial of Service (DoS) via the lan parameter.

Calling Buffer.fill() or Buffer.alloc() with some parameters can lead to a hang which could result in a Denial of Service. In order to address this vulnerability, the implementations of Buffer.alloc() and Buffer.fill() were updated so that they zero fill instead of hanging in these cases. All versions of Node.js 6.x (LTS "Boron"), 8.x (LTS "Carbon"), and 9.x are vulnerable. All versions of Node.js 10.x (Current) are NOT vulnerable.

A vulnerability was found in Nothings stb up to 1.26. Impacted is the function stbtt_InitFont_internal in the library stb_truetype.h of the component TTF File Handler. Performing a manipulation results in out-of-bounds read. Remote exploitation of the attack is possible. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

A weakness has been identified in LibRaw up to 0.22.0. This impacts the function HuffTable::initval of the file src/decompressors/losslessjpeg.cpp of the component JPEG DHT Parser. This manipulation of the argument bits[] causes out-of-bounds write. It is possible to initiate the attack remotely. The exploit has been made available to the public and could be used for attacks. Upgrading to version 0.22.1 will fix this issue. Patch name: a6734e867b19d75367c05f872ac26322464e3995. It is advisable to upgrade the affected component.

A flaw has been found in LibRaw up to 0.22.0. This affects the function LibRaw::nikon_load_padded_packed_raw of the file src/decoders/decoders_libraw.cpp of the component TIFF/NEF. Executing a manipulation of the argument load_flags/raw_width can lead to out-of-bounds read. It is possible to launch the attack remotely. The exploit has been published and may be used. Upgrading to version 0.22.1 mitigates this issue. This patch is called b8397cd45657b84e88bd1202528d1764265f185c. It is advisable to upgrade the affected component.

AMR-NB codec crash in Wireshark 4.6.0 to 4.6.4 and 4.4.0 to 4.4.14 allows denial of service

Terminator 3: War of the Machines 1.16 and earlier allows remote attackers to cause a denial of service (application crash) via a large nickname.

Tenda M3 V1.0.0.12(4856) was discovered to contain a stack overflow in the function formDelPushedAd. This vulnerability allows attackers to cause a Denial of Service (DoS) via the adPushUID parameter.

A security vulnerability has been detected in LB-LINK BL-WR9000 2.4.9. The impacted element is the function sub_44D844 of the file /goform/get_hidessid_cfg. The manipulation leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Skia, as used in Google Chrome before 25.0.1364.97 on Windows and Linux, and before 25.0.1364.99 on Mac OS X, allows remote attackers to cause a denial of service (incorrect read operation) via unspecified vectors.

Tenda M3 V1.0.0.12(4856) was discovered to contain a heap buffer overflow vulnerability in the function formEmailTest. This vulnerability allows attackers to cause a Denial of Service (DoS) via the mailpwd parameter.

Tenda M3 V1.0.0.12(4856) was discovered to contain a buffer overflow vulnerability in the function formSetPicListItem. This vulnerability allows attackers to cause a Denial of Service (DoS) via the adItemUID parameter.

A segment fault (SEGV) flaw was found in libtiff that could be triggered by passing a crafted tiff file to the TIFFReadRGBATileExt() API. This flaw allows a remote attacker to cause a heap-buffer overflow, leading to a denial of service.

AGL agl-service-can-low-level contains a stack buffer overflow in the uds-c library. The send_diagnostic_request function in uds.c allocates a 6-byte stack buffer (MAX_DIAGNOSTIC_PAYLOAD_SIZE=6) but copies up to 7 bytes (MAX_UDS_REQUEST_PAYLOAD_LENGTH=7) via memcpy at an offset of 1+pid_length (2-3 bytes), resulting in 1-4 bytes of controlled stack overflow. The payload_length field (uint8_t) has no bounds check against the destination buffer. On 32-bit ARM automotive ECUs without stack canaries, this can lead to return address overwrite and RCE.

Tenda M3 V1.0.0.12(4856) was discovered to contain a heap buffer overflow vulnerability in the function formSetFixTools. This vulnerability allows attackers to cause a Denial of Service (DoS) via the MACAddr parameter.

A vulnerability classified as critical has been found in Tenda TX3 16.03.13.11_multi. This affects an unknown part of the file /goform/setMacFilterCfg. The manipulation of the argument deviceList leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

Monkey daemon (monkeyd) before 0.9.1 allows remote attackers to cause a denial of service (memory corruption) via a request for a zero byte file.

In Sangoma Asterisk through 16.28.0, 17.x and 18.x through 18.14.0, and 19.x through 19.6.0, an incoming Setup message to addons/ooh323c/src/ooq931.c with a malformed Calling or Called Party IE can cause a crash.

Crash in the OPUS protocol dissector in Wireshark 3.6.0 to 3.6.8 allows denial of service via packet injection or crafted capture file

ngtcp2 is a C implementation of the IETF QUIC protocol. In versions prior to 1.22.1, ngtcp2_qlog_parameters_set_transport_params() serializes peer transport parameters into a fixed 1024-byte stack buffer without bounds checking. When qlog is enabled, a remote peer can send sufficiently large transport parameters during the QUIC handshake to cause writes beyond the buffer boundary, resulting in a stack buffer overflow. This affects deployments that enable the qlog callback and process untrusted peer transport parameters. This issue has been fixed in version 1.22.1. If developers are unable to immediately upgrade, they can disable the qlog on client.

An issue was discovered in Softing OPC UA C++ SDK before 6.10. A buffer overflow or an excess allocation happens due to unchecked array and matrix bounds in structure data types.

Out-of-bounds write vulnerability in the RSMC module. Impact: Successful exploitation of this vulnerability will affect availability.

AGL agl-service-can-low-level thru 17.1.12 contains a stack buffer overflow in the uds-c library. The send_diagnostic_request function in uds.c allocates a 6-byte stack buffer (MAX_DIAGNOSTIC_PAYLOAD_SIZE=6) but copies up to 7 bytes (MAX_UDS_REQUEST_PAYLOAD_LENGTH=7) via memcpy at an offset of 1+pid_length (2-3 bytes), resulting in 1-4 bytes of controlled stack overflow. The payload_length field (uint8_t) has no bounds check against the destination buffer. On 32-bit ARM automotive ECUs without stack canaries, this can lead to return address overwrite and RCE.

An off-by-one out-of-bounds write vulnerability in the bgp_flowspec_op_decode() function (bgpd/bgp_flowspec_util.c) of FRRouting (FRR) stable/10.0 allows attackers to cause a Denial of Service (DoS) via supplying a crafted FlowSpec component.

On Patlite NH-FB series devices through 1.46, remote attackers can cause a denial of service by omitting the query string. NOTE: the vendor's perspective is that "omitting the query string does not cause a denial of service and the indicated event can not be reproduced.

A weakness has been identified in libssh up to 0.11.3. The impacted element is the function sftp_extensions_get_name/sftp_extensions_get_data of the file src/sftp.c of the component SFTP Extension Name Handler. Executing a manipulation of the argument idx can lead to out-of-bounds read. The attack may be performed from remote. Upgrading to version 0.11.4 and 0.12.0 is sufficient to resolve this issue. This patch is called 855a0853ad3abd4a6cd85ce06fce6d8d4c7a0b60. You should upgrade the affected component.

A buffer overrun can be triggered in X.509 certificate verification, specifically in name constraint checking. Note that this occurs after certificate chain signature verification and requires either a CA to have signed the malicious certificate or for the application to continue certificate verification despite failure to construct a path to a trusted issuer. An attacker can craft a malicious email address to overflow four attacker-controlled bytes on the stack. This buffer overflow could result in a crash (causing a denial of service) or potentially remote code execution. Many platforms implement stack overflow protections which would mitigate against the risk of remote code execution. The risk may be further mitigated based on stack layout for any given platform/compiler. Pre-announcements of CVE-2022-3602 described this issue as CRITICAL. Further analysis based on some of the mitigating factors described above have led this to be downgraded to HIGH. Users are still encouraged to upgrade to a new version as soon as possible. In a TLS client, this can be triggered by connecting to a malicious server. In a TLS server, this can be triggered if the server requests client authentication and a malicious client connects. Fixed in OpenSSL 3.0.7 (Affected 3.0.0,3.0.1,3.0.2,3.0.3,3.0.4,3.0.5,3.0.6).

Cisco Tivoli Business Service Manager (TBSM) in Hosted Collaboration Mediation (HCM) in Cisco Hosted Collaboration Solution allows remote attackers to cause a denial of service (temporary service hang) by sending many TCP packets to certain ports, aka Bug ID CSCue03703.

A vulnerability has been found in Tenda TX3 16.03.13.11_multi and classified as critical. Affected by this vulnerability is an unknown functionality of the file /goform/setPptpUserList. The manipulation of the argument list leads to buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

CVE-2026-33449 is a buffer overflow in a message handling function of the Secure Access client prior to 14.50. Attackers with control of a modified server can send a cryptographically valid message to the client, overwriting a small portion of memory conceivably leading to a denial of service.

ipmi-oem in FreeIPMI before 1.16.17 has exploitable buffer overflows on response messages. The Intelligent Platform Management Interface (IPMI) specification defines a set of interfaces for platform management. It is implemented by a large number of hardware manufacturers to support system management. It is most commonly used for sensor reading (e.g., CPU temperatures through the ipmi-sensors command within FreeIPMI) and remote power control (the ipmipower command). The ipmi-oem client command implements a set of a IPMI OEM commands for specific hardware vendors. If a user has supported hardware, they may wish to use the ipmi-oem command to send a request to a server to retrieve specific information. Three subcommands were found to have exploitable buffer overflows on response messages. They are: "ipmi-oem dell get-last-post-code - get the last POST code and string describing the error on some Dell servers," "ipmi-oem supermicro extra-firmware-info - get extra firmware info on Supermicro servers," and "ipmi-oem wistron read-proprietary-string - read a proprietary string on Wistron servers."

A stack overflow vulnerability exists in /goform/wifiSSIDset in Tenda W6 V1.0.0.9(4122) version, which can be exploited by attackers to cause a denial of service (DoS) via the index parameter.

ImageMagick is free and open-source software used for editing and manipulating digital images. In versions below both 7.1.2-19 and 6.9.13-44, a heap buffer overflow occurs in the MVG decoder that could result in an out of bounds write when processing a crafted image. This issue has been fixed in versions 6.9.13-44 and 7.1.2-19.

A vulnerability was identified in Open Babel up to 3.1.1. This impacts the function OBAtom::GetExplicitValence of the file isrc/atom.cpp of the component CDXML File Handler. Such manipulation leads to null pointer dereference. The attack can be launched remotely. The exploit is publicly available and might be used. The name of the patch is e23a224b8fd9d7c2a7cde9ef4ec6afb4c05aa08a. It is best practice to apply a patch to resolve this issue.

MapServer is a system for developing web-based GIS applications. Starting in version 4.2 and prior to version 8.6.1, a heap-buffer-overflow write in MapServer’s SLD (Styled Layer Descriptor) parser lets a remote, unauthenticated attacker crash the MapServer process by sending a crafted SLD with more than 100 Threshold elements inside a ColorMap/Categorize structure (commonly reachable via WMS GetMap with SLD_BODY). Version 8.6.1 patches the issue.

A stack overflow vulnerability exists in /goform/WifiMacFilterGet in Tenda W6 V1.0.0.9(4122) version, which can be exploited by attackers to cause a denial of service (DoS) via the index parameter.

A CWE-119: Improper Restriction of Operations within the Bounds of a Memory Buffer vulnerability exists that could cause denial of service when parsing the URL. Affected Products: X80 advanced RTU Communication Module (BMENOR2200H) (V1.0), OPC UA Modicon Communication Module (BMENUA0100) (V1.10 and prior)

A buffer overflow vulnerability exists in Schneider Electric's Modicon M340, Modicon Premium, Modicon Quantum PLC, BMXNOR0200. The buffer overflow vulnerability is caused by the length of the source string specified (instead of the buffer size) as the number of bytes to be copied.

TripleCross v0.1.0 was discovered to contain a stack overflow which occurs because there is no limit to the length of program parameters.

A stack overflow vulnerability exists in /goform/WifiMacFilterSet in Tenda W6 V1.0.0.9(4122) version, which can be exploited by attackers to cause a denial of service (DoS) via the index parameter.

The wu_fnmatch function in wu_fnmatch.c in wu-ftpd 2.6.1 and 2.6.2 allows remote attackers to cause a denial of service (CPU exhaustion by recursion) via a glob pattern with a large number of * (wildcard) characters, as demonstrated using the dir command.