A vulnerability was determined in Cudy WR1200EA 2.3.7-20250113-121810. Affected is an unknown function of the file /etc/shadow. Executing manipulation can lead to use of default password. The attack needs to be launched locally. A high complexity level is associated with this attack. The exploitability is told to be difficult. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.

hippo4j 1.0.0 to 1.5.0, uses a hard-coded secret key in its JWT (JSON Web Token) creation. This allows attackers with access to the source code or compiled binary to forge valid access tokens and impersonate any user, including privileged ones such as "admin". The vulnerability poses a critical security risk in systems where authentication and authorization rely on the integrity of JWTs.

Netgear Nighthawk R6700 version 1.0.4.120 makes use of a hardcoded credential. It does not appear that normal users are intended to be able to manipulate configuration backups due to the fact that they are encrypted/obfuscated. By extracting the configuration using readily available public tools, a user can reconfigure settings not intended to be manipulated, repackage the configuration, and restore a backup causing these settings to be changed.

RUCKUS Network Director (RND) before 4.5 allows jailed users to obtain root access vis a weak, hardcoded password.

A vulnerability has been identified in CP-8000 MASTER MODULE WITH I/O -25/+70°C (All versions < V16.20), CP-8000 MASTER MODULE WITH I/O -40/+70°C (All versions < V16.20), CP-8021 MASTER MODULE (All versions < V16.20), CP-8022 MASTER MODULE WITH GPRS (All versions < V16.20). An undocumented debug port uses hard-coded default credentials. If this port is enabled by a privileged user, an attacker aware of the credentials could access an administrative debug shell on the affected device.

Dell SmartFabric OS10 Software, versions prior to 10.6.0.5, contains a Use of Hard-coded Password vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Elevation of privileges.

A hardcoded credential vulnerability exists in the Blue Angel Software Suite deployed on embedded Linux systems. The application contains multiple known default and hardcoded user accounts that are not disclosed in public documentation. These accounts allow unauthenticated or low-privilege attackers to gain administrative access to the device’s web interface. Exploitation evidence was observed by the Shadowserver Foundation on 2025-01-26 UTC.

Multiple vulnerabilities in the web-based management interface of Cisco Business Process Automation (BPA) could allow an authenticated, remote attacker to elevate privileges to Administrator. These vulnerabilities are due to improper authorization enforcement for specific features and for access to log files that contain confidential information. An attacker could exploit these vulnerabilities either by submitting crafted HTTP messages to an affected system and performing unauthorized actions with the privileges of an administrator, or by retrieving sensitive data from the logs and using it to impersonate a legitimate privileged user. A successful exploit could allow the attacker to elevate privileges to Administrator.

The LMS5xx uses hard-coded credentials, which potentially allow low-skilled unauthorized remote attackers to reconfigure settings and /or disrupt the functionality of the device.

Ever Traduora 0.20.0 and below is vulnerable to Privilege Escalation due to the use of a hard-coded JWT signing key.

DataSpider Servista version 4.4 and earlier uses a hard-coded cryptographic key. DataSpider Servista is data integration software. ScriptRunner and ScriptRunner for Amazon SQS are used to start the configured processes on DataSpider Servista. The cryptographic key is embedded in ScriptRunner and ScriptRunner for Amazon SQS, which is common to all users. If an attacker who can gain access to a target DataSpider Servista instance and obtain a Launch Settings file of ScriptRunner and/or ScriptRunner for Amazon SQS, the attacker may perform operations with the user privilege encrypted in the file. Note that DataSpider Servista and some of the OEM products are affected by this vulnerability. For the details of affected products and versions, refer to the information listed in [References].

The Tightrope Media Carousel Seneca HDn Windows-based appliance 7.0.4.104 is shipped with a default local administrator username and password. This can be found by a limited user account in an "unattend.xml" file left over on the C: drive from the Sysprep process. An attacker with this username and password can leverage it to gain administrator-level access on the system.

The Hawk Console and Hawk Agent components of TIBCO Software Inc.'s TIBCO Hawk, TIBCO Hawk Distribution for TIBCO Silver Fabric, TIBCO Operational Intelligence Hawk RedTail, and TIBCO Runtime Agent contain a vulnerability that theoretically allows an attacker with access to the Hawk Console’s and Agent’s log to obtain credentials used to access associated EMS servers. Affected releases are TIBCO Software Inc.'s TIBCO Hawk: versions 6.2.2 and below, TIBCO Hawk Distribution for TIBCO Silver Fabric: versions 6.2.2 and below, TIBCO Operational Intelligence Hawk RedTail: versions 7.2.1 and below, and TIBCO Runtime Agent: versions 5.12.2 and below.

An issue in PeppermintLabs Peppermint v.0.2.4 and before allows a remote attacker to obtain sensitive information and execute arbitrary code via the hardcoded session cookie.

In Weidmueller Industrial WLAN devices in multiple versions an exploitable use of hard-coded credentials vulnerability exists in multiple iw_* utilities. The device operating system contains an undocumented encryption password, allowing for the creation of custom diagnostic scripts. An attacker can send diagnostic scripts while authenticated as a low privilege user to trigger this vulnerability.

IBM Cognos Controller 11.0.0 through 11.0.1 FP3 and IBM Controller 11.1.0 client application contains hard coded database passwords in source code which could be used for unauthorized access to the system.

An attacker can gain VxWorks Shell after login due to hard-coded credentials on a KUKA KR C4 control software for versions prior to 8.7 or any product running KSS.

The RDPCore.dll component as used in the IRM Next Generation booking engine, allows a remote user to connect to customers with an "admin" account and a corresponding password computed daily by a routine inside the DLL file. Once reverse-engineered, this routine can help an attacker generate the daily password and connect to application customers. Given that this is an administrative account, anyone logging into a customer deployment has full, unrestricted access to the application.

An issue was discovered in the IGEL Universal Management Suite (UMS) 6.07.100. A hardcoded DES key in the PrefDBCredentials class allows an attacker, who has discovered encrypted superuser credentials, to decrypt those credentials using a static 8-byte DES key.

Axeda agent (All versions) and Axeda Desktop Server for Windows (All versions) uses hard-coded credentials for its UltraVNC installation. Successful exploitation of this vulnerability could allow a remote authenticated attacker to take full remote control of the host operating system.

TRENDnet TEW-814DAP v1_(FW1.01B01) was discovered to contain a hardcoded password vulnerability in /etc/shadow.sample, which allows attackers to log in as root.

A flaw was found in the ceph-ansible playbook where it contained hardcoded passwords that were being used as default passwords while deploying Ceph services. Any authenticated attacker can abuse this flaw to brute-force Ceph deployments, and gain administrator access to Ceph clusters via the Ceph dashboard to initiate read, write, and delete Ceph clusters and also modify Ceph cluster configurations. Versions before ceph-ansible 6.0.0alpha1 are affected.

Hardcoded credentials in default configuration of PPress 0.0.9.

A vulnerability in the web-based management interface of Cisco Email Security Appliance, Cisco Secure Email and Web Manager and Cisco Secure Web Appliance could allow an authenticated, remote attacker to elevate privileges on an affected system. The attacker needs valid credentials to exploit this vulnerability. This vulnerability is due to the use of a hardcoded value to encrypt a token used for certain APIs calls . An attacker could exploit this vulnerability by authenticating to the device and sending a crafted HTTP request. A successful exploit could allow the attacker to impersonate another valid user and execute commands with the privileges of that user account.

A vulnerability has been identified in Siveillance Video Open Network Bridge (2020 R3), Siveillance Video Open Network Bridge (2020 R2), Siveillance Video Open Network Bridge (2020 R1), Siveillance Video Open Network Bridge (2019 R3), Siveillance Video Open Network Bridge (2019 R2), Siveillance Video Open Network Bridge (2019 R1), Siveillance Video Open Network Bridge (2018 R3), Siveillance Video Open Network Bridge (2018 R2). Affected Open Network Bridges store user credentials for the authentication between ONVIF clients and ONVIF server using a hard-coded key. The encrypted credentials can be retrieved via the MIP SDK. This could allow an authenticated remote attacker to retrieve and decrypt all credentials stored on the ONVIF server.

The software contains a hard-coded password it uses for its own inbound authentication or for outbound communication to external components on the Reason DR60 (all firmware versions prior to 02A04.1).

Unitree Go1 <= Go1_2022_05_11 is vulnerale to Incorrect Access Control due to authentication credentials being hardcoded in plaintext.

The configuration functionality in the Intelligent Platform Management Interface (IPMI) baseboard management controller (BMC) implementation on Supermicro X11 and M11 based devices, with firmware versions through 3.17.02, allows remote authenticated users to execute arbitrary commands.

TOTOLINK CP900L v4.1.5cu.798_B20221228 was discovered to contain a hardcoded password vulnerability in /etc/shadow.sample, which allows attackers to log in as root.

IBM Controller 11.0.1, 11.1.0, 11.1.1, and 11.1.2 contains hard-coded credentials, such as a password or cryptographic key, which it uses for its own inbound authentication, outbound communication to external components, or encryption of internal data.

Netgear RAX43 version 1.0.3.96 makes use of hardcoded credentials. It does not appear that normal users are intended to be able to manipulate configuration backups due to the fact that they are encrypted. This encryption is accomplished via a password-protected zip file with a hardcoded password (RAX50w!a4udk). By unzipping the configuration using this password, a user can reconfigure settings not intended to be manipulated, re-zip the configuration, and restore a backup causing these settings to be changed.

Dokploy is a free, self-hostable Platform as a Service (PaaS). In versions prior to 0.26.6, a hardcoded credential in the provided installation script (located at https://dokploy.com/install.sh, line 154) uses a hardcoded password when creating the database container. This means that nearly all Dokploy installations use the same database credentials and could be compromised. Version 0.26.6 contains a patch for the issue.

Multiple vulnerabilities in the web-based management interface of Cisco Business Process Automation (BPA) could allow an authenticated, remote attacker to elevate privileges to Administrator. These vulnerabilities are due to improper authorization enforcement for specific features and for access to log files that contain confidential information. An attacker could exploit these vulnerabilities either by submitting crafted HTTP messages to an affected system and performing unauthorized actions with the privileges of an administrator, or by retrieving sensitive data from the logs and using it to impersonate a legitimate privileged user. A successful exploit could allow the attacker to elevate privileges to Administrator.

A vulnerability was determined in Tenda AC9 15.03.05.19. The impacted element is an unknown function of the file /etc_ro/shadow of the component Administrative Interface. This manipulation causes hard-coded credentials. It is possible to launch the attack on the local host. The attack's complexity is rated as high. The exploitability is regarded as difficult. The exploit has been publicly disclosed and may be utilized.

A vulnerability was found in Tenda AC10 16.03.10.13. Affected is an unknown function of the file /etc_ro/shadow of the component MD5 Hash Handler. Performing manipulation results in hard-coded credentials. The attack needs to be approached locally. A high degree of complexity is needed for the attack. The exploitability is told to be difficult. The exploit has been made public and could be used.

A CWE-798: Use of Hard-coded Credentials vulnerability exists in Vijeo Designer Basic (V1.1 HotFix 16 and prior) and Vijeo Designer (V6.2 SP9 and prior) which could cause unauthorized read and write when downloading and uploading project or firmware into Vijeo Designer Basic and Vijeo Designer.

A security flaw has been discovered in Tenda AC20 16.03.08.12. Affected by this vulnerability is an unknown functionality of the file /etc_ro/shadow. The manipulation leads to hard-coded credentials. It is possible to launch the attack on the local host. The complexity of an attack is rather high. The exploitation appears to be difficult. The exploit has been disclosed to the public and may be used.

Opencast before 7.6 and 8.1 enables a remember-me cookie based on a hash created from the username, password, and an additional system key. This means that an attacker getting access to a remember-me token for one server can get access to all servers which allow log-in using the same credentials without ever needing the credentials. This problem is fixed in Opencast 7.6 and Opencast 8.1

An issue was discovered on V-SOL V1600D V2.03.69 and V2.03.57, V1600D4L V1.01.49, V1600D-MINI V1.01.48, V1600G1 V2.0.7 and V1.9.7, and V1600G2 V1.1.4 OLT devices. An low-privileged (non-admin) attacker can use a hardcoded password (4ef9cea10b2362f15ba4558b1d5c081f) to create an admin user.

Certain switch models from PLANET Technology have a hard-coded credential in the specific command-line interface, allowing remote attackers with regular privilege to log in with this credential and obtain a Linux root shell.

Password reset tokens are generated using an insecure source of randomness. Attackers who know the username of the Journyx installation user can bruteforce the password reset and change the administrator password.

A vulnerability has been found in TOTOLINK A3300R 17.0.0cu.557_B20221024 and classified as problematic. Affected by this vulnerability is an unknown functionality of the file /etc/shadow.sample. The manipulation leads to use of hard-coded password. It is possible to launch the attack on the local host. The complexity of an attack is rather high. The exploitation appears to be difficult. The exploit has been disclosed to the public and may be used. The identifier VDB-272569 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as problematic, has been found in Cosmote Greece What's Up App 4.47.3 on Android. This issue affects some unknown processing of the file gr/desquared/kmmsharedmodule/db/RealmDB.java of the component Realm Database Handler. The manipulation of the argument defaultRealmKey leads to use of default cryptographic key. Local access is required to approach this attack. The complexity of an attack is rather high. The exploitation is known to be difficult. The vendor was contacted early about this disclosure but did not respond in any way.

Prima Systems FlexAir, Versions 2.3.38 and prior. The flash version of the web interface contains a hard-coded username and password, which may allow an authenticated attacker to escalate privileges.