Premisys Identicard version 3.1.190 stores user credentials and other sensitive information with a known weak encryption method (MD5 hash of a salt and password).

Premisys Identicard version 3.1.190 stores backup files as encrypted zip files. The password to the zip is hard-coded and unchangeable. An attacker with access to these backups can decrypt them and obtain sensitive data.

The Tightrope Media Carousel Seneca HDn Windows-based appliance 7.0.4.104 is shipped with a default local administrator username and password. This can be found by a limited user account in an "unattend.xml" file left over on the C: drive from the Sysprep process. An attacker with this username and password can leverage it to gain administrator-level access on the system.

A remote code execution vulnerability was identified in HPE Intelligent Management Center (IMC) PLAT earlier than version 7.3 E0506P09.

Use of hard-coded credentials vulnerability exists in STARDOM FCN Controller and FCJ Controller R4.10 to R4.31, which may allow an attacker with an administrative privilege to read/change configuration settings or update the controller with tampered firmware.

Multiple vulnerabilities in the web-based management interface of Cisco Business Process Automation (BPA) could allow an authenticated, remote attacker to elevate privileges to Administrator. These vulnerabilities are due to improper authorization enforcement for specific features and for access to log files that contain confidential information. An attacker could exploit these vulnerabilities either by submitting crafted HTTP messages to an affected system and performing unauthorized actions with the privileges of an administrator, or by retrieving sensitive data from the logs and using it to impersonate a legitimate privileged user. A successful exploit could allow the attacker to elevate privileges to Administrator.

D-Link DIR-890L 1.20b01 allows attackers to execute arbitrary code due to the hardcoded option Wake-On-Lan for the parameter 'descriptor' at SetVirtualServerSettings.php

An issue was discovered on Wifi-soft UniBox controller 0.x through 2.x devices. network/mesh/edit-nds.php is vulnerable to arbitrary file upload, allowing an attacker to upload .php files and execute code on the server with root user privileges. Authentication for accessing this component can be bypassed by using Hard coded credentials.

A hard-coded password vulnerability exists in the console infactory functionality of InHand Networks InRouter302 V3.5.37. A specially-crafted network request can lead to privileged operation execution. An attacker can send a sequence of requests to trigger this vulnerability.

Multiple I-O DATA network camera products (TS-WRLP firmware Ver.1.09.04 and earlier, TS-WRLA firmware Ver.1.09.04 and earlier, TS-WRLP/E firmware Ver.1.09.04 and earlier) use hardcoded credentials which may allow an remote authenticated attacker to execute arbitrary OS commands on the device via unspecified vector.

Axeda agent (All versions) and Axeda Desktop Server for Windows (All versions) uses hard-coded credentials for its UltraVNC installation. Successful exploitation of this vulnerability could allow a remote authenticated attacker to take full remote control of the host operating system.

A CWE-798: Use of Hard-coded Credentials vulnerability exists in Vijeo Designer Basic (V1.1 HotFix 16 and prior) and Vijeo Designer (V6.2 SP9 and prior) which could cause unauthorized read and write when downloading and uploading project or firmware into Vijeo Designer Basic and Vijeo Designer.

Netmaker is a platform for creating and managing virtual overlay networks using WireGuard. Prior to versions 0.8.5, 0.9.4, and 010.0, there is a hard-coded cryptographic key in the code base which can be exploited to run admin commands on a remote server if the exploiter know the address and username of the admin. This effects the server (netmaker) component, and not clients. This has been patched in Netmaker v0.8.5, v0.9.4, and v0.10.0. There are currently no known workarounds.

Opencast before 7.6 and 8.1 enables a remember-me cookie based on a hash created from the username, password, and an additional system key. This means that an attacker getting access to a remember-me token for one server can get access to all servers which allow log-in using the same credentials without ever needing the credentials. This problem is fixed in Opencast 7.6 and Opencast 8.1

Headwind MDM Web panel 5.22.1 is vulnerable to Incorrect Access Control due to a hard-coded JWT Secret. The secret is hardcoded into the source code available to anyone on Git Hub. This secret is used to sign the application’s JWT token and verify the incoming user-supplied tokens.

An issue was discovered in the IGEL Universal Management Suite (UMS) 6.07.100. A hardcoded DES key in the PrefDBCredentials class allows an attacker, who has discovered encrypted superuser credentials, to decrypt those credentials using a static 8-byte DES key.

A hardcoded key in ControlUp Real-Time Agent (cuAgent.exe) before 8.2.5 may allow a potential attacker to run OS commands via a WCF channel.

Netgear Nighthawk R6700 version 1.0.4.120 makes use of a hardcoded credential. It does not appear that normal users are intended to be able to manipulate configuration backups due to the fact that they are encrypted/obfuscated. By extracting the configuration using readily available public tools, a user can reconfigure settings not intended to be manipulated, repackage the configuration, and restore a backup causing these settings to be changed.

An issue was discovered on V-SOL V1600D V2.03.69 and V2.03.57, V1600D4L V1.01.49, V1600D-MINI V1.01.48, V1600G1 V2.0.7 and V1.9.7, and V1600G2 V1.1.4 OLT devices. An low-privileged (non-admin) attacker can use a hardcoded password (4ef9cea10b2362f15ba4558b1d5c081f) to create an admin user.

A vulnerability has been identified in CP-8000 MASTER MODULE WITH I/O -25/+70°C (All versions < V16.20), CP-8000 MASTER MODULE WITH I/O -40/+70°C (All versions < V16.20), CP-8021 MASTER MODULE (All versions < V16.20), CP-8022 MASTER MODULE WITH GPRS (All versions < V16.20). An undocumented debug port uses hard-coded default credentials. If this port is enabled by a privileged user, an attacker aware of the credentials could access an administrative debug shell on the affected device.

Vigilant Software Suite (Mastermed Dashboard) version 2.0.1.3 contains service credentials likely to be common across all instances. An attacker in possession of the password may gain privileges on all installations of this software.

An issue in PeppermintLabs Peppermint v.0.2.4 and before allows a remote attacker to obtain sensitive information and execute arbitrary code via the hardcoded session cookie.

The LMS5xx uses hard-coded credentials, which potentially allow low-skilled unauthorized remote attackers to reconfigure settings and /or disrupt the functionality of the device.

A flaw was found in the ceph-ansible playbook where it contained hardcoded passwords that were being used as default passwords while deploying Ceph services. Any authenticated attacker can abuse this flaw to brute-force Ceph deployments, and gain administrator access to Ceph clusters via the Ceph dashboard to initiate read, write, and delete Ceph clusters and also modify Ceph cluster configurations. Versions before ceph-ansible 6.0.0alpha1 are affected.

Extensis Portfolio v4.0 was discovered to contain hardcoded credentials which allows attackers to gain administrator privileges.

hippo4j 1.0.0 to 1.5.0, uses a hard-coded secret key in its JWT (JSON Web Token) creation. This allows attackers with access to the source code or compiled binary to forge valid access tokens and impersonate any user, including privileged ones such as "admin". The vulnerability poses a critical security risk in systems where authentication and authorization rely on the integrity of JWTs.

The ZyXEL P660HN-T1A v1 TCLinux Fw $7.3.15.0 v001 / 3.40(ULM.0)b31 router distributed by TrueOnline has two user accounts with default passwords, including a hardcoded service account with the username true and password true. These accounts can be used to login to the web interface, exploit authenticated command injections and change router settings for malicious purposes.

FreeTAKServer 1.9.8 contains a hardcoded Flask secret key which allows attackers to create crafted cookies to bypass authentication or escalate privileges.

Unitree Go1 <= Go1_2022_05_11 is vulnerale to Incorrect Access Control due to authentication credentials being hardcoded in plaintext.

The RDPCore.dll component as used in the IRM Next Generation booking engine, allows a remote user to connect to customers with an "admin" account and a corresponding password computed daily by a routine inside the DLL file. Once reverse-engineered, this routine can help an attacker generate the daily password and connect to application customers. Given that this is an administrative account, anyone logging into a customer deployment has full, unrestricted access to the application.

AMI SPx contains a vulnerability in the BMC where a valid user may cause a use of hard-coded credentials. A successful exploit of this vulnerability may lead to a loss of confidentiality, integrity, and availability.

The configuration functionality in the Intelligent Platform Management Interface (IPMI) baseboard management controller (BMC) implementation on Supermicro X11 and M11 based devices, with firmware versions through 3.17.02, allows remote authenticated users to execute arbitrary commands.

A vulnerability in the web-based management interface of Cisco Email Security Appliance, Cisco Secure Email and Web Manager and Cisco Secure Web Appliance could allow an authenticated, remote attacker to elevate privileges on an affected system. The attacker needs valid credentials to exploit this vulnerability. This vulnerability is due to the use of a hardcoded value to encrypt a token used for certain APIs calls . An attacker could exploit this vulnerability by authenticating to the device and sending a crafted HTTP request. A successful exploit could allow the attacker to impersonate another valid user and execute commands with the privileges of that user account.

The Hawk Console and Hawk Agent components of TIBCO Software Inc.'s TIBCO Hawk, TIBCO Hawk Distribution for TIBCO Silver Fabric, TIBCO Operational Intelligence Hawk RedTail, and TIBCO Runtime Agent contain a vulnerability that theoretically allows an attacker with access to the Hawk Console’s and Agent’s log to obtain credentials used to access associated EMS servers. Affected releases are TIBCO Software Inc.'s TIBCO Hawk: versions 6.2.2 and below, TIBCO Hawk Distribution for TIBCO Silver Fabric: versions 6.2.2 and below, TIBCO Operational Intelligence Hawk RedTail: versions 7.2.1 and below, and TIBCO Runtime Agent: versions 5.12.2 and below.

DataSpider Servista version 4.4 and earlier uses a hard-coded cryptographic key. DataSpider Servista is data integration software. ScriptRunner and ScriptRunner for Amazon SQS are used to start the configured processes on DataSpider Servista. The cryptographic key is embedded in ScriptRunner and ScriptRunner for Amazon SQS, which is common to all users. If an attacker who can gain access to a target DataSpider Servista instance and obtain a Launch Settings file of ScriptRunner and/or ScriptRunner for Amazon SQS, the attacker may perform operations with the user privilege encrypted in the file. Note that DataSpider Servista and some of the OEM products are affected by this vulnerability. For the details of affected products and versions, refer to the information listed in [References].

Prima Systems FlexAir, Versions 2.3.38 and prior. The flash version of the web interface contains a hard-coded username and password, which may allow an authenticated attacker to escalate privileges.

Integrated Data Protection Appliance versions 2.0, 2.1, and 2.2 contain undocumented accounts named 'support' and 'admin' that are protected with default passwords. These accounts have limited privileges and can access certain system files only. A malicious user with the knowledge of the default passwords may potentially log in to the system and gain read and write access to certain system files.

All versions of NetMan 204 allow an attacker that knows the MAC and serial number of the device to reset the administrator password via the legitimate recovery function.

An issue was discovered on Wifi-soft UniBox controller 0.x through 2.x devices. The tools/ping Ping feature of the Diagnostic Tools component is vulnerable to Remote Command Execution, allowing an attacker to execute arbitrary system commands on the server with root user privileges. Authentication for accessing this component can be bypassed by using Hard coded credentials.

A hardcoded credential vulnerability exists in the Blue Angel Software Suite deployed on embedded Linux systems. The application contains multiple known default and hardcoded user accounts that are not disclosed in public documentation. These accounts allow unauthenticated or low-privilege attackers to gain administrative access to the device’s web interface.

An issue was discovered on Wifi-soft UniBox controller 3.x devices. The tools/controller/diagnostic_tools_controller Diagnostic Tools Controller is vulnerable to Remote Command Execution, allowing an attacker to execute arbitrary system commands on the server with root user privileges. Authentication for accessing this component can be bypassed by using Hard coded credentials.

CA Performance Management 3.5.x, 3.6.x before 3.6.9, and 3.7.x before 3.7.4 have a default credential vulnerability that can allow a remote attacker to execute arbitrary commands and compromise system security.

Draeger X-Dock Firmware before 03.00.13 has Hard-Coded Credentials, leading to remote code execution by an authenticated attacker.

An attacker can gain VxWorks Shell after login due to hard-coded credentials on a KUKA KR C4 control software for versions prior to 8.7 or any product running KSS.

In Weidmueller Industrial WLAN devices in multiple versions an exploitable use of hard-coded credentials vulnerability exists in multiple iw_* utilities. The device operating system contains an undocumented encryption password, allowing for the creation of custom diagnostic scripts. An attacker can send diagnostic scripts while authenticated as a low privilege user to trigger this vulnerability.

The same hard-coded password in QSAN Storage Manager's in the firmware allows remote attackers to access the control interface with the administrator’s credential, entering the hard-coded password of the debug mode to execute the restricted system instructions. The referred vulnerability has been solved with the updated version of QSAN Storage Manager v3.3.3.

BAB TECHNOLOGIE GmbH eibPort V3. Each device has its own unique hard coded and weak root SSH key passphrase known as 'eibPort string'. This is usable and the final part of an attack chain to gain SSH root access.