Insufficient input validation in NetScaler ADC and NetScaler Gateway leading to memory overread if NetScaler ADC or NetScaler Gateway is configured as a SAML IDP

Hardcoded WSMan credentials in Intelligent Platform Management Interface (IPMI) with firmware for Supermicro X9 generation motherboards before 3.15 (SMT_X9_315) and firmware for Supermicro X8 generation motherboards before SMT X8 312.

Citrix StoreFront Server before 1903, 7.15 LTSR before CU4 (3.12.4000), and 7.6 LTSR before CU8 (3.0.8000) allows XXE attacks.

Sensitive information disclosure in NetScaler ADC and NetScaler Gateway when configured as a Gateway (VPN virtual server, ICA Proxy, CVPN, RDP Proxy) or AAA  virtual server.

Arbitrary file read in Citrix ADC and Citrix Gateway 

Insufficient input validation leading to memory overread in NetScaler ADC and NetScaler Gateway if the TCP TimeStamp is enabled in TCP Profile and is associated with the virtual server (of type LB, CS, VPN) or the service configured on NetScaler

An issue has been identified in the CTX269106 mitigation tool for Citrix ShareFile storage zones controller which causes the ShareFile file encryption option to become disabled if it had previously been enabled. Customers are only affected by this issue if they previously selected “Enable Encryption” in the ShareFile configuration page and did not re-select this setting after running the CTX269106 mitigation tool. ShareFile customers who have not run the CTX269106 mitigation tool or who re-selected “Enable Encryption” immediately after running the tool are unaffected by this issue.

In certain situations, all versions of Citrix ShareFile StorageZones (aka storage zones) Controller, including the most recent 5.10.x releases as of May 2020, allow unauthenticated attackers to access the documents and folders of ShareFile users. NOTE: unlike most CVEs, exploitability depends on the product version that was in use when a particular setup step was performed, NOT the product version that is in use during a current assessment of a CVE consumer's product inventory. Specifically, the vulnerability can be exploited if a storage zone was created by one of these product versions: 5.9.0, 5.8.0, 5.7.0, 5.6.0, 5.5.0, or earlier. This CVE differs from CVE-2020-8982 and CVE-2020-8983 but has essentially the same risk.

Insufficient input validation leading to memory overread when the NetScaler is configured as a Gateway (VPN virtual server, ICA Proxy, CVPN, RDP Proxy) OR AAA virtual server

Arbitrary file read in NetScaler Console and NetScaler SDX (SVM)

Citrix Cloud Connector before 6.31.0.62192 suffers from insecure storage of sensitive information due to sensitive information being stored in the Citrix Cloud Connector installation log files. Such information could be used by an malicious actor to access a Citrix Cloud environment. This issue affects all versions of Citrix Cloud Connector that were installed by passing secure client parameters for installation via the command line. The issue does not affect Citrix Cloud Connector if it was installed using the interactive installer or where a parameter file was used with the command-line installer.

An unauthenticated arbitrary file read issue exists in all versions of Citrix ShareFile StorageZones (aka storage zones) Controller, including the most recent 5.10.x releases as of May 2020. RCE and file access is granted to everything hosted by ShareFile, be it on-premise or inside Citrix Cloud itself (both are internet facing). NOTE: unlike most CVEs, exploitability depends on the product version that was in use when a particular setup step was performed, NOT the product version that is in use during a current assessment of a CVE consumer's product inventory. Specifically, the vulnerability can be exploited if a storage zone was created by one of these product versions: 5.9.0, 5.8.0, 5.7.0, 5.6.0, 5.5.0, or earlier. This CVE differs from CVE-2020-7473 and CVE-2020-8983.

An arbitrary file write issue exists in all versions of Citrix ShareFile StorageZones (aka storage zones) Controller, including the most recent 5.10.x releases as of May 2020, which allows remote code execution. RCE and file access is granted to everything hosted by ShareFile, be it on-premise or inside Citrix Cloud itself (both are internet facing). NOTE: unlike most CVEs, exploitability depends on the product version that was in use when a particular setup step was performed, NOT the product version that is in use during a current assessment of a CVE consumer's product inventory. Specifically, the vulnerability can be exploited if a storage zone was created by one of these product versions: 5.9.0, 5.8.0, 5.7.0, 5.6.0, 5.5.0, or earlier. This CVE differs from CVE-2020-7473 and CVE-2020-8982.

Insufficient protection of secrets in Citrix XenMobile Server 10.12 before RP3, Citrix XenMobile Server 10.11 before RP6, Citrix XenMobile Server 10.10 RP6 and Citrix XenMobile Server before 10.9 RP5 discloses credentials of a service account.

Improper access control in Citrix XenMobile Server 10.12 before RP2, Citrix XenMobile Server 10.11 before RP4, Citrix XenMobile Server 10.10 before RP6 and Citrix XenMobile Server before 10.9 RP5 and leads to the ability to read arbitrary files.

Improper authentication in Citrix XenMobile Server 10.12 before RP2, Citrix XenMobile Server 10.11 before RP4, Citrix XenMobile Server 10.10 before RP6 and Citrix XenMobile Server before 10.9 RP5 leads to the ability to access sensitive files.

Citrix XenApp 6.5, when 2FA is enabled, allows a remote unauthenticated attacker to ascertain whether a user exists on the server, because the 2FA error page only occurs after a valid username is entered. NOTE: This vulnerability only affects products that are no longer supported by the maintainer

Mockoon provides way to design and run mock APIs. Prior to version 9.2.0, a mock API configuration for static file serving follows the same approach presented in the documentation page, where the server filename is generated via templating features from user input is vulnerable to Path Traversal and LFI, allowing an attacker to get any file in the mock server filesystem. The issue may be particularly relevant in cloud hosted server instances. Version 9.2.0 fixes the issue.

A vulnerability has been identified in syngo Dynamics (All versions < VA40G HF01). syngo Dynamics application server hosts a web service using an operation with improper read access control that could allow files to be retrieved from any folder accessible to the account assigned to the website’s application pool.

The Auto Amazon Links – Amazon Associates Affiliate Plugin plugin for WordPress is vulnerable to arbitrary files reads in all versions up to, and including, 5.4.3 via the '/wp-json/wp/v2/aal_ajax_unit_loading' RST API endpoint. This makes it possible for unauthenticated attackers to read the contents of arbitrary files on the server, which can contain sensitive information.

There is a local file inclusion vulnerability in ArcGIS Server 11.3 and below that may allow a remote, unauthenticated attacker to craft a URL that could potentially disclose sensitive configuration information by reading internal files from the remote server.  Due to the nature of the files accessible in this vulnerability the impact to confidentiality is High there is no impact to both integrity or availability.

ACEweb Online Portal 3.5.065 was discovered to contain an External Controlled File Path and Name vulnerability via the txtFilePath parameter in attachments.awp.

Flowise before 3.0.6 contains an arbitrary file read vulnerability in the chatId parameter of the /api/v1/get-upload-file and /api/v1/openai-assistants-file/download endpoints. The chatId value is not validated and is passed to streamStorageFile(), where a fallback file-lookup path constructed without the orgId is evaluated after the storage-directory containment check, allowing path traversal beyond the intended storage directory. Unauthenticated attackers can read sensitive files such as /root/.flowise/database.sqlite, exposing all database content in the default configuration.

There is a local file inclusion vulnerability in Esri Portal for ArcGIS 11.2 and below that may allow a remote, unauthenticated attacker to craft a URL that could potentially disclose sensitive configuration information by reading internal files.

Collabora Online is a collaborative online office suite based on LibreOffice technology. Any deployment of voilà dashboard allow local file inclusion. Any file on a filesystem that is readable by the user that runs the voilà dashboard server can be downloaded by someone with network access to the server. Whether this still requires authentication depends on how voilà is deployed. This issue has been patched in 0.2.17, 0.3.8, 0.4.4 and 0.5.6.

The All-in-One Video Gallery plugin for WordPress is vulnerable to arbitrary file downloads and blind server-side request forgery via the 'dl' parameter found in the ~/public/video.php file in versions up to, and including 2.6.0. This makes it possible for unauthenticated users to download sensitive files hosted on the affected server and forge requests to the server.

An external control of file name or path vulnerability in the download file function of Soar Cloud HRD Human Resource Management System through version 7.3.2025.0408 allows remote attackers to obtain partial files by specifying arbitrary file paths.

IBM Watson Query on Cloud Pak for Data 4.0.0 through 4.0.9, 4.5.0 through 4.5.3, 4.6.0 through 4.6.6, 4.7.0 through 4.7.4, and 4.8.0 through 4.8.7 could allow unauthorized data access from a remote data source object due to improper privilege management.

paddlepaddle/paddle 2.6.0 allows arbitrary file read via paddle.vision.ops.read_file.

The CS Framework plugin for WordPress is vulnerable to Arbitrary File Read in all versions up to, and including, 6.9 via the get_widget_settings_json() function. This makes it possible for authenticated attackers, with subscriber-level access and above, to read the contents of arbitrary files on the server, which can contain sensitive information.

Terrascan v1.18.3 and prior are vulnerable to Server-Side Request Forgery (SSRF) via the remote_url parameter in the remote directory scan endpoint (POST /v1/{iac}/{iacVersion}/{cloud}/remote/dir/scan) when running in server mode. An unauthenticated remote attacker can supply an attacker-controlled HTTP URL as remote_url with remote_type set to "http". The URL is passed directly to hashicorp/go-getter (v1.7.5) without validation. Go-getter's HttpGetter supports the X-Terraform-Get response header, allowing the attacker's server to redirect the download to a file:// URL, enabling local file read. Additionally, HttpGetter has Netrc set to true, causing it to read ~/.netrc and send stored credentials to attacker-controlled hostnames. This affects deployments running terrascan in server mode (terrascan server), which binds to 0.0.0.0 with no authentication. Note: Terrascan was archived in August 2023 and no patch will be released.

Terrascan v1.18.3 and prior are vulnerable to Server-Side Request Forgery (SSRF) via external URL resolution in uploaded IaC templates when running in server mode. When Terrascan parses uploaded ARM templates or CloudFormation templates, it resolves external URLs referenced within those templates via hashicorp/go-getter with all default detectors enabled, including FileDetector. An unauthenticated remote attacker can upload an ARM template containing a templateLink.uri or parametersLink.uri field, or a CloudFormation template containing an AWS::CloudFormation::Stack TemplateURL field, pointing to an attacker-controlled URL. Terrascan will fetch the attacker-controlled URL server-side. Unlike SSRF via the remote scan endpoint, file:// URLs are directly usable without requiring an X-Terraform-Get redirect, enabling local file read. This affects deployments running terrascan in server mode (terrascan server), which binds to 0.0.0.0 with no authentication. Note: Terrascan was archived in August 2023 and no patch will be released.

Dalfox is a powerful open-source XSS scanner and utility focused on automation. Prior to 2.13.0, when dalfox is run in REST API server mode, the custom-payload-file field in model.Options is JSON-tagged and deserialized directly from the attacker's request body, then propagated unchanged through dalfox.Initialize into the scan engine. The engine passes the value to voltFile.ReadLinesOrLiteral, which reads lines from any file path accessible to the dalfox process and embeds each line as an XSS payload in outbound HTTP requests directed at the attacker-controlled target URL. Because the server has no API key by default, an unauthenticated network attacker can exfiltrate the contents of arbitrary files on the dalfox host by reading them line-by-line through scan traffic. This vulnerability is fixed in 2.13.0.

changedetection.io is a free open source web page change detection tool. Prior to 0.55.1, the vulnerability is caused by trusting attacker-controlled snapshot paths restored from backup files. The vulnerable flow starts in the backup restore logic. When a backup ZIP is restored, the application extracts the archive and copies each restored watch UUID directory directly into the live datastore using shutil.copytree(entry.path, dst_dir). This preserves attacker-controlled files inside the restored watch directory, including history.txt. After restore, the application parses history.txt in the watch history property and returns the contents of the targeted local file. This vulnerability is fixed in 0.55.1.

SiYuan is a personal knowledge management system. Prior to version 3.6.2, the Siyuan kernel exposes an unauthenticated file-serving endpoint under `/appearance/*filepath.` Due to improper path sanitization, attackers can perform directory traversal and read arbitrary files accessible to the server process. Authentication checks explicitly exclude this endpoint, allowing exploitation without valid credentials. Version 3.6.2 fixes this issue.

SQLBot is an intelligent data query system based on a large language model and RAG. Versions prior to 1.7.0 contain a Server-Side Request Forgery (SSRF) vulnerability that allows an attacker to retrieve arbitrary system and application files from the server. An attacker can exploit the /api/v1/datasource/check endpoint by configuring a forged MySQL data source with a malicious parameter extraJdbc="local_infile=1". When the SQLBot backend attempts to verify the connectivity of this data source, an attacker-controlled Rogue MySQL server issues a malicious LOAD DATA LOCAL INFILE command during the MySQL handshake. This forces the target server to read arbitrary files from its local filesystem (such as /etc/passwd or configuration files) and transmit the contents back to the attacker. This issue was fixed in version 1.7.0.

NodeBB Plugin Emoji 3.2.1 contains an arbitrary file write vulnerability that allows administrative users to write files to arbitrary system locations through the emoji upload API. Attackers with admin access can craft file upload requests with directory traversal to overwrite system files by manipulating the file path parameter.

OpenClaw versions prior to 2026.2.14 contain a local file inclusion vulnerability in BlueBubbles extension (must be installed and enabled) media path handling that allows attackers to read arbitrary files from the local filesystem. The sendBlueBubblesMedia function fails to validate mediaPath parameters against an allowlist, enabling attackers to request sensitive files like /etc/passwd and exfiltrate them as media attachments.

HSC MailInspector v5.3.3-7 contains a Local File Inclusion (LFI) vulnerability caused by improper control of user-supplied file paths. The endpoint /vendor/phpunit/phpunit.php processes user-controlled parameters that directly affect file access operations without adequate validation, sanitization, or path restriction. This allows a remote attacker to exploit Path Traversal techniques to read arbitrary files from the underlying operating system and application directories, leading to sensitive information disclosure.

ws-scrcpy is vulnerable to External Control of File Name or Path

Penpot is an open-source design tool for design and code collaboration. Prior to version 2.13.2, an authenticated user can read arbitrary files from the server by supplying a local file path (e.g. `/etc/passwd`) as a font data chunk in the `create-font-variant` RPC endpoint, resulting in the file contents being stored and retrievable as a "font" asset. This is an arbitrary file read vulnerability. Any authenticated user with team edit permissions can read arbitrary files accessible to the Penpot backend process on the host filesystem. This can lead to exposure of sensitive system files, application secrets, database credentials, and private keys, potentially enabling further compromise of the server. In containerized deployments, the blast radius may be limited to the container filesystem, but environment variables, mounted secrets, and application configuration are still at risk. Version 2.13.2 contains a patch for the issue.

Arbitrary file read in the model loading mechanism (HDF5 integration) in Keras versions 3.0.0 through 3.13.1 on all supported platforms allows a remote attacker to read local files and disclose sensitive information via a crafted .keras model file utilizing HDF5 external dataset references.

An information disclosure vulnerability exists in the image404Raw.php functionality of WWBN AVideo dev master commit 15fed957fb. A specially crafted HTTP request can lead to arbitrary file read.

WordPress Plugin mb.miniAudioPlayer-an HTML5 audio player for your mp3 files is prone to multiple vulnerabilities, including open proxy and security bypass vulnerabilities because it fails to properly verify user-supplied input. An attacker may leverage these issues to hide attacks directed at a target site from behind vulnerable website or to perform otherwise restricted actions and subsequently download files with the extension mp3, mp4a, wav and ogg from anywhere the web server application has read access to the system. WordPress Plugin mb.miniAudioPlayer-an HTML5 audio player for your mp3 files version 1.7.6 is vulnerable; prior versions may also be affected.

The Propovoice: All-in-One Client Management System plugin for WordPress is vulnerable to Arbitrary File Read in all versions up to, and including, 1.7.6.7 via the send_email() function. This makes it possible for unauthenticated attackers to read the contents of arbitrary files on the server, which can contain sensitive information.

A vulnerability has been identified in syngo Dynamics (All versions < VA40G HF01). syngo Dynamics application server hosts a web service using an operation with improper read access control that could allow files to be retrieved from any folder accessible to the account assigned to the website’s application pool.

jsPDF is a library to generate PDFs in JavaScript. Prior to version 4.0.0, user control of the first argument of the loadFile method in the node.js build allows local file inclusion/path traversal. If given the possibility to pass unsanitized paths to the loadFile method, a user can retrieve file contents of arbitrary files in the local file system the node process is running in. The file contents are included verbatim in the generated PDFs. Other affected methods are `addImage`, `html`, and `addFont`. Only the node.js builds of the library are affected, namely the `dist/jspdf.node.js` and `dist/jspdf.node.min.js` files. The vulnerability has been fixed in jsPDF@4.0.0. This version restricts file system access per default. This semver-major update does not introduce other breaking changes. Some workarounds areavailable. With recent node versions, jsPDF recommends using the `--permission` flag in production. The feature was introduced experimentally in v20.0.0 and is stable since v22.13.0/v23.5.0/v24.0.0. For older node versions, sanitize user-provided paths before passing them to jsPDF.

@vitejs/plugin-rs provides React Server Components (RSC) support for Vite. Prior to version 0.5.8, the `/__vite_rsc_findSourceMapURL` endpoint in `@vitejs/plugin-rsc` allows unauthenticated arbitrary file read during development mode. An attacker can read any file accessible to the Node.js process by sending a crafted HTTP request with a `file://` URL in the `filename` query parameter. Version 0.5.8 fixes the issue.

External control of file name or path in certain Zoom Clients may allow an unauthenticated user to conduct a disclosure of information via network access.

The eMagicOne Store Manager for WooCommerce plugin for WordPress is vulnerable to Arbitrary File Reads in all versions up to, and including, 1.2.5 via the get_file() function. This makes it possible for unauthenticated attackers to read the contents of arbitrary files on the server, which can contain sensitive information. This is only exploitable by unauthenticated attackers in default configurations where the the default password is left as 1:1, or where the attacker gains access to the credentials.