An issue was discovered in ACRN before 2.5. It allows a devicemodel/hw/pci/virtio/virtio_net.c virtio_net_ping_rxq NULL pointer dereference for vq->used.

The igmp_heard_query function in net/ipv4/igmp.c in the Linux kernel before 3.2.1 allows remote attackers to cause a denial of service (divide-by-zero error and panic) via IGMP packets.

IBM DB2 for Linux, UNIX and Windows (includes DB2 Connect Server) 9.7, 10.1, 10.5, 11.1, and 11.5 could allow an unauthenticated user to send specially crafted packets to cause a denial of service from excessive memory usage.

iDrive RemotePC before 4.0.1 on Linux allows denial of service. A remote and unauthenticated attacker can disconnect a valid user session by connecting to an ephemeral port.

An issue was discovered in src/http/httpLib.c in EmbedThis Appweb Community Edition 8.2.1, allows attackers to cause a denial of service via the stream paramter to the parseUri function.

The br_parse_ip_options function in net/bridge/br_netfilter.c in the Linux kernel before 2.6.39 does not properly initialize a certain data structure, which allows remote attackers to cause a denial of service by leveraging connectivity to a network interface that uses an Ethernet bridge device.

IBM DB2 for Linux, UNIX and Windows (includes Db2 Connect Server) 10.5, 11.1, and 11.5 is vulnerable to a denial of service as it may trap when compiling a variation of an anonymous block. IBM X-Force ID: 251991.

Db2 for Linux, UNIX and Windows (includes Db2 Connect Server) is vulnerable to a denial of service as the server terminates abnormally when executing a specially crafted SELECT statement. IBM X-Force ID: 200659.

The dma_rx function in drivers/net/wireless/b43/dma.c in the Linux kernel before 2.6.39 does not properly allocate receive buffers, which allows remote attackers to cause a denial of service (system crash) via a crafted frame.

The IPv6 implementation in the Linux kernel before 3.1 does not generate Fragment Identification values separately for each destination, which makes it easier for remote attackers to cause a denial of service (disrupted networking) by predicting these values and sending crafted packets.

net/core/net_namespace.c in the Linux kernel 2.6.32 and earlier does not properly handle a high rate of creation and cleanup of network namespaces, which makes it easier for remote attackers to cause a denial of service (memory consumption) via requests to a daemon that requires a separate namespace per connection, as demonstrated by vsftpd.

IBM Informix Dynamic Server 12.10,14.10, and15.0 could allow a remote attacker to cause a denial of service due to an integer underflow when processing packets.

The icmp6_send function in net/ipv6/icmp.c in the Linux kernel through 4.8.12 omits a certain check of the dst data structure, which allows remote attackers to cause a denial of service (panic) via a fragmented IPv6 packet.

Integer underflow in the dccp_parse_options function (net/dccp/options.c) in the Linux kernel before 2.6.33.14 allows remote attackers to cause a denial of service via a Datagram Congestion Control Protocol (DCCP) packet with an invalid feature options length, which triggers a buffer over-read.

The IP stack in the Linux kernel before 4.6 allows remote attackers to cause a denial of service (stack consumption and panic) or possibly have unspecified other impact by triggering use of the GRO path for packets with tunnel stacking, as demonstrated by interleaved IPv4 headers and GRE headers, a related issue to CVE-2016-7039.

The IP stack in the Linux kernel through 4.8.2 allows remote attackers to cause a denial of service (stack consumption and panic) or possibly have unspecified other impact by triggering use of the GRO path for large crafted packets, as demonstrated by packets that contain only VLAN headers, a related issue to CVE-2016-8666.

The br_mdb_ip_get function in net/bridge/br_multicast.c in the Linux kernel before 2.6.35-rc5 allows remote attackers to cause a denial of service (NULL pointer dereference and system crash) via an IGMP packet, related to lack of a multicast table.

nfqnl_mangle in net/netfilter/nfnetlink_queue.c in the Linux kernel through 5.18.14 allows remote attackers to cause a denial of service (panic) because, in the case of an nf_queue verdict with a one-byte nfta_payload attribute, an skb_pull can encounter a negative skb->len.

IBM Sterling Partner Engagement Manager 6.1, 6.2, and Cloud 22.2 do not limit the length of a connection which could cause the server to become unresponsive. IBM X-Force ID: 230932.

The socket implementation in net/core/sock.c in the Linux kernel before 2.6.35 does not properly manage a backlog of received packets, which allows remote attackers to cause a denial of service by sending a large amount of network traffic, related to the sk_add_backlog function and the sk_rmem_alloc socket field. NOTE: this vulnerability exists because of an incomplete fix for CVE-2010-4251.

The NFSv4 server in the Linux kernel before 4.11.3 does not properly validate the layout type when processing the NFSv4 pNFS GETDEVICEINFO or LAYOUTGET operand in a UDP packet from a remote attacker. This type value is uninitialized upon encountering certain error conditions. This value is used as an array index for dereferencing, which leads to an OOPS and eventually a DoS of knfsd and a soft-lockup of the whole system.

IBM Security Verify Access 20.07 could allow a remote attacker to send a specially crafted HTTP GET request that could cause the application to crash.

The tcp_cwnd_reduction function in net/ipv4/tcp_input.c in the Linux kernel before 4.3.5 allows remote attackers to cause a denial of service (divide-by-zero error and system crash) via crafted TCP traffic.

A vulnerability exists in kernel/time/clocksource.c in the Linux kernel before 2.6.34 where on non-GENERIC_TIME systems (GENERIC_TIME=n), accessing /sys/devices/system/clocksource/clocksource0/current_clocksource results in an OOPS.

IBM Db2 for Linux, UNIX and Windows (includes DB2 Connect Server) 11.5.0 through 11.5.9 and 12.1.0 through 12.1.2 is vulnerable to a denial of service as the server may crash under certain conditions with a specially crafted query due to improper release of memory resources.

The Device Model in ACRN through 2.5 has a devicemodel/core/mem.c use-after-free for a freed rb_entry.

The polling timer handler in ACRN before 2.5 has a use-after-free for a freed virtio device, related to devicemodel/hw/pci/virtio/*.c.

ACRN before 2.5 has a hw/pci/virtio/virtio.c vq_endchains NULL Pointer Dereference.

A certain Red Hat patch for net/ipv4/route.c in the Linux kernel 2.6.18 on Red Hat Enterprise Linux (RHEL) 5 allows remote attackers to cause a denial of service (deadlock) via crafted packets that force collisions in the IPv4 routing hash table, and trigger a routing "emergency" in which a hash chain is too long. NOTE: this is related to an issue in the Linux kernel before 2.6.31, when the kernel routing cache is disabled, involving an uninitialized pointer and a panic.

CAI Content Credentials versions c2pa-web@0.7.1, c2pa-v0.80.1 and earlier are affected by an Integer Overflow or Wraparound vulnerability. An attacker could exploit this vulnerability to crash the application, leading to a denial-of-service condition. Exploitation of this issue does not require user interaction.

IBM Rational Build Forge 7.0.2 allows remote attackers to cause a denial of service (CPU consumption) via a port scan, which spawns multiple bfagent server processes that attempt to read data from closed sockets.

IBM Sterling B2B Integrator and and IBM Sterling File Gateway 6.1.0.0 through 6.1.2.7_2, 6.2.0.0 through 6.2.0.5_1, 6.2.1.0 through 6.2.1.1_1, and 6.2.2.0 could allow an unauthenticated attacker to send a specially crafted request that causes the application to crash.

Db2 for Linux, UNIX and Windows (includes Db2 Connect Server) 11.1.4 and 11.5.5 is vulnerable to a denial of service as the server terminates abnormally when executing a specially crafted SELECT statement. IBM X-Force ID: 200658.

IBM InfoSphere Information Server 11.7.0.0 through 11.7.1.6 is vulnerable to an XML external entity injection (XXE) attack when processing XML data. A remote attacker could exploit this vulnerability to expose sensitive information or consume memory resources.

Improper validation of specified type of input in .NET Framework allows an unauthorized attacker to deny service over a network.

In the Linux kernel, the following vulnerability has been resolved: net: consume xmit errors of GSO frames udpgro_frglist.sh and udpgro_bench.sh are the flakiest tests currently in NIPA. They fail in the same exact way, TCP GRO test stalls occasionally and the test gets killed after 10min. These tests use veth to simulate GRO. They attach a trivial ("return XDP_PASS;") XDP program to the veth to force TSO off and NAPI on. Digging into the failure mode we can see that the connection is completely stuck after a burst of drops. The sender's snd_nxt is at sequence number N [1], but the receiver claims to have received (rcv_nxt) up to N + 3 * MSS [2]. Last piece of the puzzle is that senders rtx queue is not empty (let's say the block in the rtx queue is at sequence number N - 4 * MSS [3]). In this state, sender sends a retransmission from the rtx queue with a single segment, and sequence numbers N-4*MSS:N-3*MSS [3]. Receiver sees it and responds with an ACK all the way up to N + 3 * MSS [2]. But sender will reject this ack as TCP_ACK_UNSENT_DATA because it has no recollection of ever sending data that far out [1]. And we are stuck. The root cause is the mess of the xmit return codes. veth returns an error when it can't xmit a frame. We end up with a loss event like this: ------------------------------------------------- | GSO super frame 1 | GSO super frame 2 | |-----------------------------------------------| | seg | seg | seg | seg | seg | seg | seg | seg | | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | ------------------------------------------------- x ok ok <ok>| ok ok ok <x> \\ snd_nxt "x" means packet lost by veth, and "ok" means it went thru. Since veth has TSO disabled in this test it sees individual segments. Segment 1 is on the retransmit queue and will be resent. So why did the sender not advance snd_nxt even tho it clearly did send up to seg 8? tcp_write_xmit() interprets the return code from the core to mean that data has not been sent at all. Since TCP deals with GSO super frames, not individual segment the crux of the problem is that loss of a single segment can be interpreted as loss of all. TCP only sees the last return code for the last segment of the GSO frame (in <> brackets in the diagram above). Of course for the problem to occur we need a setup or a device without a Qdisc. Otherwise Qdisc layer disconnects the protocol layer from the device errors completely. We have multiple ways to fix this. 1) make veth not return an error when it lost a packet. While this is what I think we did in the past, the issue keeps reappearing and it's annoying to debug. The game of whack a mole is not great. 2) fix the damn return codes We only talk about NETDEV_TX_OK and NETDEV_TX_BUSY in the documentation, so maybe we should make the return code from ndo_start_xmit() a boolean. I like that the most, but perhaps some ancient, not-really-networking protocol would suffer. 3) make TCP ignore the errors It is not entirely clear to me what benefit TCP gets from interpreting the result of ip_queue_xmit()? Specifically once the connection is established and we're pushing data - packet loss is just packet loss? 4) this fix Ignore the rc in the Qdisc-less+GSO case, since it's unreliable. We already always return OK in the TCQ_F_CAN_BYPASS case. In the Qdisc-less case let's be a bit more conservative and only mask the GSO errors. This path is taken by non-IP-"networks" like CAN, MCTP etc, so we could regress some ancient thing. This is the simplest, but also maybe the hackiest fix? Similar fix has been proposed by Eric in the past but never committed because original reporter was working with an OOT driver and wasn't providing feedback (see Link).

In the Linux kernel, the following vulnerability has been resolved: smb: server: fix active_num_conn leak on transport allocation failure Commit 77ffbcac4e56 ("smb: server: fix leak of active_num_conn in ksmbd_tcp_new_connection()") addressed the kthread_run() failure path. The earlier alloc_transport() == NULL path in the same function has the same leak, is reachable pre-authentication via any TCP connect to port 445, and was empirically reproduced on UML (ARCH=um, v7.0-rc7): a small number of forced allocation failures were sufficient to put ksmbd into a state where every subsequent connection attempt was rejected for the remainder of the boot. ksmbd_kthread_fn() increments active_num_conn before calling ksmbd_tcp_new_connection() and discards the return value, so when alloc_transport() returns NULL the socket is released and -ENOMEM returned without decrementing the counter. Each such failure permanently consumes one slot from the max_connections pool; once cumulative failures reach the cap, atomic_inc_return() hits the threshold on every subsequent accept and every new connection is rejected. The counter is only reset by module reload. An unauthenticated remote attacker can drive the server toward the memory pressure that makes alloc_transport() fail by holding open connections with large RFC1002 lengths up to MAX_STREAM_PROT_LEN (0x00FFFFFF); natural transient allocation failures on a loaded host produce the same drift more slowly. Mirror the existing rollback pattern in ksmbd_kthread_fn(): on the alloc_transport() failure path, decrement active_num_conn gated on server_conf.max_connections. Repro details: with the patch reverted, forced alloc_transport() NULL returns leaked counter slots and subsequent connection attempts -- including legitimate connects issued after the forced-fail window had closed -- were all rejected with "Limit the maximum number of connections". With this patch applied, the same connect sequence produces no rejections and the counter cycles cleanly between zero and one on every accept.

IBM WebSphere Application Server 9.0, and 8.5 and IBM WebSphere Application Server - Liberty 17.0.0.3 through 26.0.0.6 are vulnerable to a denial of service, caused by sending a specially-crafted request. A remote attacker could exploit this vulnerability to cause the server to consume memory resources.

In the Linux kernel, the following vulnerability has been resolved: nvmet: move async event work off nvmet-wq For target nvmet_ctrl_free() flushes ctrl->async_event_work. If nvmet_ctrl_free() runs on nvmet-wq, the flush re-enters workqueue completion for the same worker:- A. Async event work queued on nvmet-wq (prior to disconnect): nvmet_execute_async_event() queue_work(nvmet_wq, &ctrl->async_event_work) nvmet_add_async_event() queue_work(nvmet_wq, &ctrl->async_event_work) B. Full pre-work chain (RDMA CM path): nvmet_rdma_cm_handler() nvmet_rdma_queue_disconnect() __nvmet_rdma_queue_disconnect() queue_work(nvmet_wq, &queue->release_work) process_one_work() lock((wq_completion)nvmet-wq) <--------- 1st nvmet_rdma_release_queue_work() C. Recursive path (same worker): nvmet_rdma_release_queue_work() nvmet_rdma_free_queue() nvmet_sq_destroy() nvmet_ctrl_put() nvmet_ctrl_free() flush_work(&ctrl->async_event_work) __flush_work() touch_wq_lockdep_map() lock((wq_completion)nvmet-wq) <--------- 2nd Lockdep splat: ============================================ WARNING: possible recursive locking detected 6.19.0-rc3nvme+ #14 Tainted: G N -------------------------------------------- kworker/u192:42/44933 is trying to acquire lock: ffff888118a00948 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: touch_wq_lockdep_map+0x26/0x90 but task is already holding lock: ffff888118a00948 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: process_one_work+0x53e/0x660 3 locks held by kworker/u192:42/44933: #0: ffff888118a00948 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: process_one_work+0x53e/0x660 #1: ffffc9000e6cbe28 ((work_completion)(&queue->release_work)){+.+.}-{0:0}, at: process_one_work+0x1c5/0x660 #2: ffffffff82d4db60 (rcu_read_lock){....}-{1:3}, at: __flush_work+0x62/0x530 Workqueue: nvmet-wq nvmet_rdma_release_queue_work [nvmet_rdma] Call Trace: __flush_work+0x268/0x530 nvmet_ctrl_free+0x140/0x310 [nvmet] nvmet_cq_put+0x74/0x90 [nvmet] nvmet_rdma_free_queue+0x23/0xe0 [nvmet_rdma] nvmet_rdma_release_queue_work+0x19/0x50 [nvmet_rdma] process_one_work+0x206/0x660 worker_thread+0x184/0x320 kthread+0x10c/0x240 ret_from_fork+0x319/0x390 Move async event work to a dedicated nvmet-aen-wq to avoid reentrant flush on nvmet-wq.

In the Linux kernel, the following vulnerability has been resolved: smb: smbdirect: introduce smbdirect_socket.recv_io.credits.available The logic off managing recv credits by counting posted recv_io and granted credits is racy. That's because the peer might already consumed a credit, but between receiving the incoming recv at the hardware and processing the completion in the 'recv_done' functions we likely have a window where we grant credits, which don't really exist. So we better have a decicated counter for the available credits, which will be incremented when we posted new recv buffers and drained when we grant the credits to the peer.

In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix possible deadlock between unlink and dio_end_io_write ocfs2_unlink takes orphan dir inode_lock first and then ip_alloc_sem, while in ocfs2_dio_end_io_write, it acquires these locks in reverse order. This creates an ABBA lock ordering violation on lock classes ocfs2_sysfile_lock_key[ORPHAN_DIR_SYSTEM_INODE] and ocfs2_file_ip_alloc_sem_key. Lock Chain #0 (orphan dir inode_lock -> ip_alloc_sem): ocfs2_unlink ocfs2_prepare_orphan_dir ocfs2_lookup_lock_orphan_dir inode_lock(orphan_dir_inode) <- lock A __ocfs2_prepare_orphan_dir ocfs2_prepare_dir_for_insert ocfs2_extend_dir ocfs2_expand_inline_dir down_write(&oi->ip_alloc_sem) <- Lock B Lock Chain #1 (ip_alloc_sem -> orphan dir inode_lock): ocfs2_dio_end_io_write down_write(&oi->ip_alloc_sem) <- Lock B ocfs2_del_inode_from_orphan() inode_lock(orphan_dir_inode) <- Lock A Deadlock Scenario: CPU0 (unlink) CPU1 (dio_end_io_write) ------ ------ inode_lock(orphan_dir_inode) down_write(ip_alloc_sem) down_write(ip_alloc_sem) inode_lock(orphan_dir_inode) Since ip_alloc_sem is to protect allocation changes, which is unrelated with operations in ocfs2_del_inode_from_orphan. So move ocfs2_del_inode_from_orphan out of ip_alloc_sem to fix the deadlock.

Insufficient Verification of Data Authenticity, Improper Handling of Exceptional Conditions vulnerability in rustdesk-client RustDesk Client rustdesk-client on Windows, MacOS, Linux, iOS, Android (Heartbeat sync loop, strategy processing modules) allows Protocol Manipulation. This vulnerability is associated with program files src/hbbs_http/sync.Rs and program routines stop-service handler in heartbeat loop. This issue affects RustDesk Client: through 1.4.8.

IBM HTTP Server 8.5, and 9.0 is vulnerable to denial of service via the optional module mod_mem_cache.

Denial of service due to insufficient input validation in authentication logging. The following products are affected: Acronis Cyber Protect 17 (Linux, Windows) before build 41186.

Out-of-bounds read in .NET allows an unauthorized attacker to deny service over a network.

Uncontrolled resource consumption in .NET allows an unauthorized attacker to deny service over a network.

IBM DB2 for Linux, UNIX and Windows (includes DB2 Connect Server) 9.7, 10.1, 10.5, 11.1, and 11.5 could allow an unauthenticated attacker to cause a denial of service due a hang in the execution of a terminate command. IBM X-Force ID: 180076.

IBM MQ, IBM MQ Appliance, IBM MQ for HPE NonStop 8.0, 9.1 CD, and 9.1 LTS could allow an attacker to cause a denial of service due to a memory leak caused by an error creating a dynamic queue. IBM X-Force ID: 179080.

IBM HTTP Server 8.5, and 9.0 is vulnerable to denial of service via the optional module mod_fastcgi module.

IBM WebSphere Application Server 9.0, and 8.5 and IBM WebSphere Application Server - Liberty 17.0.0.3 through 26.0.0.6 are vulnerable to a denial of service, caused by sending a specially-crafted request. A remote attacker could exploit this vulnerability to cause the server to consume memory resources.