Traefik is an open source HTTP reverse proxy and load balancer. The traefik docker container uses 100% CPU when it serves as its own backend, which is an automatically generated route resulting from the Docker integration in the default configuration. This issue has been addressed in versions 2.10.6 and 3.0.0-beta5. Users are advised to upgrade. There are no known workarounds for this vulnerability.

Traefik is an open source HTTP reverse proxy and load balancer. When Traefik is configured to use the `HTTPChallenge` to generate and renew the Let's Encrypt TLS certificates, the delay authorized to solve the challenge (50 seconds) can be exploited by attackers to achieve a `slowloris attack`. This vulnerability has been patch in version 2.10.6 and 3.0.0-beta5. Users are advised to upgrade. Users unable to upgrade should replace the `HTTPChallenge` with the `TLSChallenge` or the `DNSChallenge`.

Traefik (pronounced traffic) is a modern HTTP reverse proxy and load balancer for deploying microservices. There is a vulnerability in Go when parsing the HTTP headers, which impacts Traefik. HTTP header parsing could allocate substantially more memory than required to hold the parsed headers. This behavior could be exploited to cause a denial of service. This issue has been patched in versions 2.9.10 and 2.10.0-rc2.

Traefik is an HTTP reverse proxy and load balancer. Prior to 3.6.8, there is a potential vulnerability in Traefik managing STARTTLS requests. An unauthenticated client can bypass Traefik entrypoint respondingTimeouts.readTimeout by sending the 8-byte Postgres SSLRequest (STARTTLS) prelude and then stalling, causing connections to remain open indefinitely, leading to a denial of service. This vulnerability is fixed in 3.6.8.

Traefik is an HTTP reverse proxy and load balancer. Prior to versions 2.11.38 and 3.6.9, there is a potential vulnerability in Traefik managing TLS handshake on TCP routers. When Traefik processes a TLS connection on a TCP router, the read deadline used to bound protocol sniffing is cleared before the TLS handshake is completed. When a TLS handshake read error occurs, the code attempts a second handshake with different connection parameters, silently ignoring the initial error. A remote unauthenticated client can exploit this by sending an incomplete TLS record and stopping further data transmission, causing the TLS handshake to stall indefinitely and holding connections open. By opening many such stalled connections in parallel, an attacker can exhaust file descriptors and goroutines, degrading availability of all services on the affected entrypoint. This issue has been patched in versions 2.11.38 and 3.6.9.

Traefik (pronounced traffic) is a modern HTTP reverse proxy and load balancer that assists in deploying microservices. There is a potential vulnerability in Traefik managing HTTP/2 connections. A closing HTTP/2 server connection could hang forever because of a subsequent fatal error. This failure mode could be exploited to cause a denial of service. There has been a patch released in versions 2.8.8 and 2.9.0-rc5. There are currently no known workarounds.

Traefik is an HTTP reverse proxy and load balancer. In affected versions sending a GET request to any Traefik endpoint with the "Content-length" request header results in an indefinite hang with the default configuration. This vulnerability can be exploited by attackers to induce a denial of service. This vulnerability has been addressed in version 2.11.2 and 3.0.0-rc5. Users are advised to upgrade. For affected versions, this vulnerability can be mitigated by configuring the readTimeout option.

The HTTP/2 protocol allows a denial of service (server resource consumption) because request cancellation can reset many streams quickly, as exploited in the wild in August through October 2023.

Traefik is an HTTP reverse proxy and load balancer. Prior to versions 2.11.38 and 3.6.9, there is a potential vulnerability in Traefik managing the ForwardAuth middleware responses. When Traefik is configured to use the ForwardAuth middleware, the response body from the authentication server is read entirely into memory without any size limit. There is no maxResponseBodySize configuration to restrict the amount of data read from the authentication server response. If the authentication server returns an unexpectedly large or unbounded response body, Traefik will allocate unlimited memory, potentially causing an out-of-memory (OOM) condition that crashes the process. This results in a denial of service for all routes served by the affected Traefik instance. This issue has been patched in versions 2.11.38 and 3.6.9.

GitLab has remediated an issue in GitLab CE/EE affecting all versions from 17.10 before 18.4.5, 18.5 before 18.5.3, and 18.6 before 18.6.1 that could have allowed an unauthenticated user to cause a Denial of Service condition by sending specifically crafted requests containing malicious JSON payloads.

GitLab has remediated an issue in GitLab CE/EE affecting all versions from 11.10 before 18.4.6, 18.5 before 18.5.4, and 18.6 before 18.6.2 that could have allowed an unauthenticated user to create a denial of service condition by sending crafted GraphQL queries that bypass query complexity limits.

MediaWiki before 1.36.2 allows a denial of service (resource consumption because of lengthy query processing time). ApiQueryBacklinks (action=query&list=backlinks) can cause a full table scan.

EasyFlow GP developed by Digiwin has a Denial of service vulnerability, allowing unauthenticated remote attackers to send specific requests that result in denial of web service.

@fastify/accepts-serializer cached serializer-selection results keyed by the request Accept header without a size limit or eviction policy. A remote unauthenticated client could send many distinct but matching Accept header variants to make the cache grow unbounded, eventually exhausting the Node.js heap and crashing the process. Versions <= 6.0.3 are affected. Update to 6.0.4 or later, which bounds the cache via an LRU with a default size of 100 entries, configurable through the new cacheSize plugin option.

h2o is an HTTP server with support for HTTP/1.x, HTTP/2 and HTTP/3. The QUIC stack (quicly), as used by H2O up to commit 43f86e5 (in version 2.3.0-beta and prior), is susceptible to a state exhaustion attack. When H2O is serving HTTP/3, a remote attacker can exploit this vulnerability to progressively increase the memory retained by the QUIC stack. This can eventually cause H2O to abort due to memory exhaustion. The vulnerability has been resolved in commit d67e81d03be12a9d53dc8271af6530f40164cd35. HTTP/1 and HTTP/2 are not affected by this vulnerability as they do not use QUIC. Administrators looking to mitigate this issue without upgrading can disable HTTP/3 support.

Boundary Community Edition and Boundary Enterprise (“Boundary”) workers are vulnerable to a denial-of-service condition during node enrollment TLS handshakes. An attacker with network access to the worker authentication listener may open a connection and delay or withhold the client certificate during the TLS handshake, causing worker connection handling to block. This may prevent legitimate worker connections from being accepted or routed. This vulnerability, CVE-2026-7776, is fixed in Boundary 0.21.3, 0.20.3, 0.19.5.

An issue was discovered in GitLab EE affecting all versions starting with 12.3 before 17.7.7, 17.8 prior to 17.8.5, and 17.9 prior to 17.9.2. A vulnerability in certain GitLab instances could allow an attacker to cause a denial of service condition by manipulating specific API inputs.

Grackle is a GraphQL server written in functional Scala, built on the Typelevel stack. The GraphQL specification requires that GraphQL fragments must not form cycles, either directly or indirectly. Prior to Grackle version 0.18.0, that requirement wasn't checked, and queries with cyclic fragments would have been accepted for type checking and compilation. The attempted compilation of such fragments would result in a JVM `StackOverflowError` being thrown. Some knowledge of an applications GraphQL schema would be required to construct such a query, however no knowledge of any application-specific performance or other behavioural characteristics would be needed. Grackle uses the cats-parse library for parsing GraphQL queries. Prior to version 0.18.0, Grackle made use of the cats-parse `recursive` operator. However, `recursive` is not currently stack safe. `recursive` was used in three places in the parser: nested selection sets, nested input values (lists and objects), and nested list type declarations. Consequently, queries with deeply nested selection sets, input values or list types could be constructed which exploited this, causing a JVM `StackOverflowException` to be thrown during parsing. Because this happens very early in query processing, no specific knowledge of an applications GraphQL schema would be required to construct such a query. The possibility of small queries resulting in stack overflow is a potential denial of service vulnerability. This potentially affects all applications using Grackle which have untrusted users. Both stack overflow issues have been resolved in the v0.18.0 release of Grackle. As a workaround, users could interpose a sanitizing layer in between untrusted input and Grackle query processing.

A vulnerability has been identified in RUGGEDCOM ROX MX5000 (All versions < V2.14.1), RUGGEDCOM ROX RX1400 (All versions < V2.14.1), RUGGEDCOM ROX RX1500 (All versions < V2.14.1), RUGGEDCOM ROX RX1501 (All versions < V2.14.1), RUGGEDCOM ROX RX1510 (All versions < V2.14.1), RUGGEDCOM ROX RX1511 (All versions < V2.14.1), RUGGEDCOM ROX RX1512 (All versions < V2.14.1), RUGGEDCOM ROX RX1524 (All versions < V2.14.1), RUGGEDCOM ROX RX1536 (All versions < V2.14.1), RUGGEDCOM ROX RX5000 (All versions < V2.14.1). Affected devices write crashdumps without checking if enough space is available on the filesystem. Once the crashdump fills the entire root filesystem, affected devices fail to boot successfully. An attacker can leverage this vulnerability to cause a permanent Denial-of-Service.

GitLab has remediated an issue in GitLab CE/EE affecting all versions from 11.0 before 18.3.5, 18.4 before 18.4.3, and 18.5 before 18.5.1 that could have allowed an unauthenticated attacker to cause a denial of service condition by sending GraphQL requests with crafted JSON payloads.

Versions of the package pdfmake before 0.3.0-beta.17 are vulnerable to Allocation of Resources Without Limits or Throttling via repeatedly redirect URL in file embedding. An attacker can cause the application to crash or become unresponsive by providing crafted input that triggers this condition.

A flaw was found in Keycloak. This vulnerability allows an unauthenticated remote attacker to cause a denial of service (DoS) by repeatedly initiating TLS 1.2 client-initiated renegotiation requests to exhaust server CPU resources, making the service unavailable.

Discourse is an open source platform for community discussion. In versions 3.1.0 through 3.1.2 of the `stable` branch and versions 3.1.0,beta6 through 3.2.0.beta2 of the `beta` and `tests-passed` branches, Redis memory can be depleted by crafting a site with an abnormally long favicon URL and drafting multiple posts which Onebox it. The issue is patched in version 3.1.3 of the `stable` branch and version 3.2.0.beta3 of the `beta` and `tests-passed` branches. There are no known workarounds.

Vault is vulnerable to a denial-of-service condition where an unauthenticated attacker can repeatedly initiate or cancel root token generation or rekey operations, occupying the single in-progress operation slot. This prevents legitimate operators from completing these workflows. This vulnerability, CVE-2026-5807, is fixed in Vault Community Edition 2.0.0 and Vault Enterprise 2.0.0.

Frontier is Substrate's Ethereum compatibility layer. Prior to commit aea528198b3b226e0d20cce878551fd4c0e3d5d0, at the end of a contract execution, when opcode SUICIDE marks a contract to be deleted, the software uses `storage::remove_prefix` (now renamed to `storage::clear_prefix`) to remove all storages associated with it. This is a single IO primitive call passing the WebAssembly boundary. For large contracts, the call (without providing a `limit` parameter) can be slow. In addition, for parachains, all storages to be deleted will be part of the PoV, which easily exceed relay chain PoV size limit. On the other hand, Frontier's maintainers only charge a fixed cost for opcode SUICIDE. The maintainers consider the severity of this issue high, because an attacker can craft a contract with a lot of storage values on a parachain, and then call opcode SUICIDE on the contract. If the transaction makes into a parachain block, the parachain will then stall because the PoV size will exceed relay chain's limit. This is especially an issue for XCM transactions, because they can't be skipped. Commit aea528198b3b226e0d20cce878551fd4c0e3d5d0 contains a patch for this issue. For parachains, it's recommended to issue an emergency runtime upgrade as soon as possible. For standalone chains, the impact is less severe because the issue mainly affects PoV sizes. It's recommended to issue a normal runtime upgrade as soon as possible. There are no known workarounds.

An issue was discovered in the Wikibase extension for MediaWiki before 1.35.12, 1.36.x through 1.39.x before 1.39.5, and 1.40.x before 1.40.1. There is no rate limit for merging items.

OpenTelemetry-Go Contrib is a collection of third-party packages for OpenTelemetry-Go. A handler wrapper out of the box adds labels `http.user_agent` and `http.method` that have unbound cardinality. It leads to the server's potential memory exhaustion when many malicious requests are sent to it. HTTP header User-Agent or HTTP method for requests can be easily set by an attacker to be random and long. The library internally uses `httpconv.ServerRequest` that records every value for HTTP `method` and `User-Agent`. In order to be affected, a program has to use the `otelhttp.NewHandler` wrapper and not filter any unknown HTTP methods or User agents on the level of CDN, LB, previous middleware, etc. Version 0.44.0 fixed this issue when the values collected for attribute `http.request.method` were changed to be restricted to a set of well-known values and other high cardinality attributes were removed. As a workaround to stop being affected, `otelhttp.WithFilter()` can be used, but it requires manual careful configuration to not log certain requests entirely. For convenience and safe usage of this library, it should by default mark with the label `unknown` non-standard HTTP methods and User agents to show that such requests were made but do not increase cardinality. In case someone wants to stay with the current behavior, library API should allow to enable it.

Under certain circumstances, invalid authentication credentials could be sent to the login endpoint of Johnson Controls Metasys NAE55, SNE, and SNC engines prior to versions 11.0.6 and 12.0.4 and Facility Explorer F4-SNC engines prior to versions 11.0.6 and 12.0.4 to cause denial-of-service.

A gzip decompression bomb vulnerability exists when Orthanc processes HTTP request with `Content-Encoding: gzip`. The server does not enforce limits on decompressed size and allocates memory based on attacker-controlled compression metadata. A specially crafted gzip payload can trigger excessive memory allocation and exhaust system memory.

An issue was discovered in Pillow before 10.0.0. It is a Denial of Service that uncontrollably allocates memory to process a given task, potentially causing a service to crash by having it run out of memory. This occurs for truetype in ImageFont when textlength in an ImageDraw instance operates on a long text argument.

An issue was discovered in GitLab CE/EE affecting all versions starting from 17.2 before 18.2.7, 18.3 before 18.3.3, and 18.4 before 18.4.1, that allows an attacker to cause uncontrolled CPU consumption, potentially leading to a Denial of Service (DoS) condition while using specific GraphQL queries.

CWE-770: Allocation of Resources Without Limits or Throttling vulnerability exists that could cause communications to stop when malicious packets are sent to the webserver of the device.

An issue was discovered in Couchbase Server 6.6.x through 7.2.0, before 7.1.5 and 7.2.1. Unauthenticated users may cause memcached to run out of memory via large commands.

plone.rest allows users to use HTTP verbs such as GET, POST, PUT, DELETE, etc. in Plone. Starting in the 2.x branch and prior to versions 2.0.1 and 3.0.1, when the `++api++` traverser is accidentally used multiple times in a url, handling it takes increasingly longer, making the server less responsive. Patches are available in `plone.rest` 2.0.1 and 3.0.1. Series 1.x is not affected. As a workaround, one may redirect `/++api++/++api++` to `/++api++` in one's frontend web server (nginx, Apache).

An issue was discovered in 6.0 before 6.0.4, 5.2 before 5.2.13, and 4.2 before 4.2.30. ASGI requests with a missing or understated `Content-Length` header could bypass the `DATA_UPLOAD_MAX_MEMORY_SIZE` limit when reading `HttpRequest.body`, allowing remote attackers to load an unbounded request body into memory. Earlier, unsupported Django series (such as 5.0.x, 4.1.x, and 3.2.x) were not evaluated and may also be affected. Django would like to thank Superior for reporting this issue.

A memory exhaustion vulnerability exists in the HTTP server due to unbounded use of the `Content-Length` header. The server allocates memory directly based on the attacker supplied header value without enforcing an upper limit. A crafted HTTP request containing an extremely large `Content-Length` value can trigger excessive memory allocation and server termination, even without sending a request body.

An issue was discovered in GitLab CE/EE affecting all versions before 18.2.7, 18.3 before 18.3.3, and 18.4 before 18.4.1 that allows unauthenticated users to cause a Denial of Service (DoS) condition while uploading specifically crafted large JSON files.

modern-async is an open source JavaScript tooling library for asynchronous operations using async/await and promises. In affected versions a bug affecting two of the functions in this library: forEachSeries and forEachLimit. They should limit the concurrency of some actions but, in practice, they don't. Any code calling these functions will be written thinking they would limit the concurrency but they won't. This could lead to potential security issues in other projects. The problem has been patched in 1.0.4. There is no workaround.

When TCP Verified Accept is enabled on a TCP profile that is configured on a Virtual Server, undisclosed requests can cause an increase in memory resource utilization.  Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated

Denial of service condition in M-Files Server in versions before 25.1.14445.5 allows an unauthenticated user to consume computing resources in certain conditions.

An issue was discovered in Django 5.1 before 5.1.4, 5.0 before 5.0.10, and 4.2 before 4.2.17. The strip_tags() method and striptags template filter are subject to a potential denial-of-service attack via certain inputs containing large sequences of nested incomplete HTML entities.

An adversary could crash the entire device by sending a large quantity of ICMP requests if the controller has the built-in web server enabled but does not have the built-in web server completely set up and configured for the SNAP PAC S1 Firmware version R10.3b

Firebird is a relational database. Versions 4.0.0 through 4.0.3 and version 5.0 beta1 are vulnerable to a server crash when a user uses a specific form of SET BIND statement. Any non-privileged user with minimum access to a server may type a statement with a long `CHAR` length, which causes the server to crash due to stack corruption. Versions 4.0.4.2981 and 5.0.0.117 contain fixes for this issue. No known workarounds are available.

An adversary could cause a continuous restart loop to the entire device by sending a large quantity of HTTP GET requests if the controller has the built-in web server enabled but does not have the built-in web server completely set up and configured for the SNAP PAC S1 Firmware version R10.3b

A memory exhaustion vulnerability exists in ZIP archive processing. Orthanc automatically extracts ZIP archives uploaded to certain endpoints and trusts metadata fields describing the uncompressed size of archived files. An attacker can craft a small ZIP archive containing a forged size value, causing the server to allocate extremely large buffers during extraction.

FreeSWITCH is a Software Defined Telecom Stack enabling the digital transformation from proprietary telecom switches to a software implementation that runs on any commodity hardware. Prior to version 1.10.10, FreeSWITCH allows authorized users to cause a denial of service attack by sending re-INVITE with SDP containing duplicate codec names. When a call in FreeSWITCH completes codec negotiation, the `codec_string` channel variable is set with the result of the negotiation. On a subsequent re-negotiation, if an SDP is offered that contains codecs with the same names but with different formats, there may be too many codec matches detected by FreeSWITCH leading to overflows of its internal arrays. By abusing this vulnerability, an attacker is able to corrupt stack of FreeSWITCH leading to an undefined behavior of the system or simply crash it. Version 1.10.10 contains a patch for this issue.

A vulnerability in a logging API in Cisco Firepower Management Center (FMC) Software could allow an unauthenticated, remote attacker to cause the device to become unresponsive or trigger an unexpected reload. This vulnerability could also allow an attacker with valid user credentials, but not Administrator privileges, to view a system log file that they would not normally have access to. This vulnerability is due to a lack of rate-limiting of requests that are sent to a specific API that is related to an FMC log. An attacker could exploit this vulnerability by sending a high rate of HTTP requests to the API. A successful exploit could allow the attacker to cause a denial of service (DoS) condition due to the FMC CPU spiking to 100 percent utilization or to the device reloading. CPU utilization would return to normal if the attack traffic was stopped before an unexpected reload was triggered.

In archive/zip in Go before 1.16.8 and 1.17.x before 1.17.1, a crafted archive header (falsely designating that many files are present) can cause a NewReader or OpenReader panic. NOTE: this issue exists because of an incomplete fix for CVE-2021-33196.

OpenClaw versions 2026.4.9 before 2026.4.10 contain a denial of service vulnerability in the voice-call realtime WebSocket path that accepts oversized frames without proper validation. Remote attackers can send oversized WebSocket frames to cause service unavailability for deployments exposing the webhook path.