METIS WIC devices (versions <= oscore 2.1.234-r18) expose a web-based shell at the /console endpoint that does not require authentication. Accessing this endpoint allows a remote attacker to execute arbitrary operating system commands with root (UID 0) privileges. This results in full system compromise, allowing unauthorized access to modify system configuration, read sensitive data, or disrupt device operations

Multiple vulnerabilities in Cisco SD-WAN vManage Software could allow an unauthenticated, remote attacker to execute arbitrary code or gain access to sensitive information, or allow an authenticated, local attacker to gain escalated privileges or gain unauthorized access to the application. For more information about these vulnerabilities, see the Details section of this advisory.

JumpServer is an open source bastion host. When users enable MFA and use a public key for authentication, the Koko SSH server does not verify the corresponding SSH private key. An attacker could exploit a vulnerability by utilizing a disclosed public key to attempt brute-force authentication against the SSH service This issue has been patched in versions 3.6.5 and 3.5.6. Users are advised to upgrade. There are no known workarounds for this issue.

The MoreConvert Pro plugin for WordPress is vulnerable to Authentication Bypass in all versions up to, and including, 1.9.14. This is due to the guest waitlist verification flow not invalidating or regenerating verification tokens when the customer email address is changed. This makes it possible for unauthenticated attackers to authenticate as existing users, including administrators, by obtaining a valid guest verification token for an attacker-controlled email, changing the same guest customer email to the target account email through the public waitlist flow, and then using the original verification link.

A vulnerability was determined in Technostrobe HI-LED-WR120-G2 5.5.0.1R6.03.30. The affected element is the function index_config of the file /LoginCB. This manipulation causes improper authentication. It is possible to initiate the attack remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was identified in Tenda AC8 16.03.50.11. Affected by this issue is the function check_is_ipv6 of the component IPv6 Handler. The manipulation leads to reliance on ip address for authentication. It is possible to initiate the attack remotely. The exploit is publicly available and might be used.

Arelle before 2.39.10 contains an unauthenticated remote code execution vulnerability in the /rest/configure REST endpoint that accepts a plugins query parameter and forwards it to the plugin manager without authentication or authorization. Attackers can supply a URL to a malicious Python file through the plugins parameter, causing the Arelle webserver to download and execute the attacker-controlled code within the Arelle process with its privileges.

An issue was discovered on D-Link DVA-5592 A1_WI_20180823 devices. If the PIN of the page "/ui/cbpc/login" is the default Parental Control PIN (0000), it is possible to bypass the login form by editing the path of the cookie "sid" generated by the page. The attacker will have access to the router control panel with administrator privileges.

Vvveb before version 1.0.8.2 contains a hard-coded credentials vulnerability in its docker-compose-apache.yaml configuration that allows unauthenticated attackers to access the bundled phpMyAdmin container with pre-configured database credentials. Attackers can connect to the phpMyAdmin port to gain unrestricted read and write access to the entire Vvveb database, including administrator password hashes, customer personally identifiable information, and order data, enabling account takeover and data manipulation.

Under certain ldap conditions, Cacti authentication can be bypassed with certain credential types.

goshs is a SimpleHTTPServer written in Go. Prior to 2.0.0-beta.6, goshs contains an SFTP authentication bypass when the documented empty-username basic-auth syntax is used. If the server is started with -b ':pass' together with -sftp, goshs accepts that configuration but does not install any SFTP password handler. As a result, an unauthenticated network attacker can connect to the SFTP service and access files without a password. This vulnerability is fixed in 2.0.0-beta.6.

cPanel and WHM versions after 11.40 contain an authentication bypass vulnerability in the login flow that allows unauthenticated remote attackers to gain unauthorized access to the control panel.

Nginx UI is a web user interface for the Nginx web server. In version 2.3.5, an unauthenticated bootstrap takeover exists in nginx-ui during the initial installation window exposed by POST /api/install. At time of publication no public patches are available.

Flowise is a drag & drop user interface to build a customized large language model flow. Prior to 3.1.0, this vulnerability allows remote attackers to bypass authentication on affected installations of FlowiseAI Flowise. Authentication is not required to exploit this vulnerability. The specific flaw exists within the resetPassword method of the AccountService class. There is no check performed to ensure that a password reset token has actually been generated for a user account. By default the value of the reset token stored in a users account is null, or an empty string if they've reset their password before. An attacker with knowledge of the user's email address can submit a request to the "/api/v1/account/reset-password" endpoint containing a null or empty string reset token value and reset that user's password to a value of their choosing. This vulnerability is fixed in 3.1.0.

A vulnerability in SenseLive X3050’s embedded management service allows full administrative control to be established without any form of authentication or authorization on the SenseLive config application. The service accepts management connections from any reachable host, enabling unrestricted modification of critical configuration parameters, operational modes, and device state through a vendor-supplied or compatible client.

eQ-3 Homematic CCU2 2.47.20 and CCU3 3.47.18 with the E-Mail AddOn through 1.6.8.c installed allow Remote Code Execution by unauthenticated attackers with access to the web interface via the save.cgi script for payload upload and the testtcl.cgi script for its execution.

In OPPO Store APP, there's a possible escalation of privilege due to improper input validation.

Rclone is a command-line program to sync files and directories to and from different cloud storage providers. Starting in version 1.48.0 and prior to version 1.73.5, the RC endpoint `operations/fsinfo` is exposed without `AuthRequired: true` and accepts attacker-controlled `fs` input. Because `rc.GetFs(...)` supports inline backend definitions, an unauthenticated attacker can instantiate an attacker-controlled backend on demand. For the WebDAV backend, `bearer_token_command` is executed during backend initialization, making single-request unauthenticated local command execution possible on reachable RC deployments without global HTTP authentication. Version 1.73.5 patches the issue.

Red Lion SixTRAK and VersaTRAK Series RTUs with authenticated users enabled (UDR-A) any Sixnet UDR message will meet an authentication challenge over UDP/IP. When the same message is received over TCP/IP the RTU will simply accept the message with no authentication challenge.

An authentication bypass vulnerability exists in HPE StoreOnce Software.

Unauthenticated RCE in HPE Insight Cluster Management Utility

The Civi - Job Board & Freelance Marketplace WordPress Theme plugin for WordPress is vulnerable to authentication bypass in all versions up to, and including, 2.1.4. This is due to a lack of user validation before changing a password. This makes it possible for unauthenticated attackers to change the password of arbitrary users, including administrators, if the attacker knows the username of the victim.

An issue was discovered on COROS PACE 3 devices through 3.0808.0. It identifies itself as a device without input or output capabilities, which results in the use of the Just Works pairing method. This method does not implement any authentication, which therefore allows machine-in-the-middle attacks. Furthermore, this lack of authentication allows attackers to interact with the device via BLE without requiring prior authorization.

A vulnerability has been found in Demososo DM Enterprise Website Building System up to 2022.8 and classified as critical. Affected by this vulnerability is the function dmlogin of the file indexDM_load.php of the component Cookie Handler. The manipulation of the argument is_admin with the input y leads to improper authentication. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-254605 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability exists in an Orchestrator service that could allow an unauthenticated remote attacker to bypass multi-factor authentication requirements. Successful exploitation could allow an attacker to create an admin user account without the necessary multi-factor authentication, thereby compromising the integrity of secured access to the system.

NETGEAR DGN1000 before 1.1.00.48 is vulnerable to an authentication bypass vulnerability. A remote and unauthenticated attacker can execute arbitrary operating system commands as root by sending crafted HTTP requests to the setup.cgi endpoint. This vulnerability has been observed to be exploited in the wild since at least 2017 and specifically by the Shadowserver Foundation on 2025-02-06 UTC.

The Paid Membership Subscriptions – Effortless Memberships, Recurring Payments & Content Restriction plugin for WordPress is vulnerable to Authentication Bypass in all versions up to, and including, 2.13.7. This is due to the pms_pb_payment_redirect_link function using the user-controlled value supplied via the 'pms_payment_id' parameter to authenticate users without any further identity validation. This makes it possible for unauthenticated attackers with knowledge of a valid payment ID to log in as any user who has made a purchase on the targeted site.

The SMS Alert Order Notifications – WooCommerce plugin for WordPress is vulnerable to privilege escalation via account takeover in all versions up to, and including, 3.7.9. This is due to the plugin using the Host header to determine if the plugin is in a playground environment. This makes it possible for unauthenticated attackers to spoof the Host header to make the OTP code "1234" and authenticate as any user, including administrators.

The AdForest theme for WordPress is vulnerable to authentication bypass in all versions up to, and including, 5.1.8. This is due to the plugin not properly verifying a user's identity prior to logging them in as that user. This makes it possible for unauthenticated attackers to authenticate as any user as long as they have configured OTP login by phone number.

PacsOne Server (PACS Server In One Box) below 7.1.1 is affected by incorrect access control, which can result in remotely gaining administrator privileges.

SKYSEA Client View Ver.11.221.03 and earlier allows remote code execution via a flaw in processing authentication on the TCP connection with the management console program.

Trendnet AC2600 TEW-827DRU version 2.08B01 contains an authentication bypass vulnerability. It is possible for an unauthenticated, malicous actor to force the change of the admin password due to a hidden administrative command.

maddy is a composable, all-in-one mail server. Starting with version 0.2.0 and prior to version 0.6.3, maddy allows a full authentication bypass if SASL authorization username is specified when using the PLAIN authentication mechanisms. Instead of validating the specified username, it is accepted as is after checking the credentials for the authentication username. maddy 0.6.3 includes the fix for the bug. There are no known workarounds.

The Biagiotti Membership plugin for WordPress is vulnerable to authentication bypass in all versions up to, and including, 1.0.2. This is due to the plugin not properly verifying a user's identity prior to authenticating them. This makes it possible for unauthenticated attackers to log in as other users, such as administrators, granted they have access to an email.

A vulnerability was identified in doramart DoraCMS 3.0.x. This issue affects some unknown processing of the file /api/v1/mail/send of the component Email API. Such manipulation leads to improper authentication. It is possible to launch the attack remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

Rack::Session is a session management implementation for Rack. From 2.0.0 to before 2.1.2, Rack::Session::Cookie incorrectly handles decryption failures when configured with secrets:. If cookie decryption fails, the implementation falls back to a default decoder instead of rejecting the cookie. This allows an unauthenticated attacker to supply a crafted session cookie that is accepted as valid session data without knowledge of any configured secret. Because this mechanism is used to load session state, an attacker can manipulate session contents and potentially gain unauthorized access. This vulnerability is fixed in 2.1.2.

The PayU CommercePro Plugin plugin for WordPress is vulnerable to privilege escalation in all versions up to, and including, 3.8.3. This is due to /wp-json/payu/v1/generate-user-token and /wp-json/payu/v1/get-shipping-cost REST API endpoints not properly verifying a user's identity prior to setting the users ID and auth cookies. This makes it possible for unauthenticated attackers to create new administrative user accounts.

Weak access control in OpenText PVCS Version Manager allows potential bypassing of authentication and download of files.

A vulnerability was found in Apereo CAS 6.6. It has been classified as critical. This affects an unknown part of the file /login?service of the component 2FA. The manipulation leads to improper authentication. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Vasion Print (formerly PrinterLogic) Virtual Appliance Host prior to 22.0.1049 and Application prior to 20.0.2786 (VA and SaaS deployments) configure the SSH client within Docker instances with the following options: `UserKnownHostsFile=/dev/null`, `StrictHostKeyChecking=no`, and `ForwardAgent yes`. These settings disable verification of the remote host’s SSH key and automatically forward the developer’s SSH‑agent to any host that matches the configured wildcard patterns. As a result, an attacker who can reach a single compromised container can cause the container to connect to a malicious SSH server, capture the forwarded private keys, and use those keys for unrestricted lateral movement across the environment. This vulnerability has been identified by the vendor as: V-2024-027 — Insecure Secure Shell (SSH) Configuration.

Vasion Print (formerly PrinterLogic) Virtual Appliance Host prior to version 25.2.169 and Application prior to version 25.2.1518 (VA/SaaS deployments) expose every internal Docker container to the network because firewall rules allow unrestricted traffic to the Docker bridge network. Because no authentication, ACL or client‑side identifier is required, the attacker can interact with any internal API, bypassing the product’s authentication mechanisms entirely. The result is unauthenticated remote access to internal services, allowing credential theft, configuration manipulation and potential remote code execution. This vulnerability has been identified by the vendor as: V-2025-002 — Authentication Bypass - Docker Instances.

The Sign In With Google plugin for WordPress is vulnerable to authentication bypass in all versions up to, and including, 1.8.0. This is due to the 'authenticate_user' user function not implementing sufficient null value checks when setting the access token and user information. This makes it possible for unauthenticated attackers to log in as the first user who has signed in using Google OAuth, which could be the site administrator.

Vasion Print (formerly PrinterLogic) Virtual Appliance Host prior to version 22.0.1026 and Application prior to version 20.0.2702 (only VA deployments) expose an unauthenticated firmware-upload flow: a public page returns a signed token usable at va-api/v1/update, and every Docker image contains the appliance’s private GPG key and hard-coded passphrase. An attacker who extracts the key and obtains a token can decrypt, modify, re-sign, upload, and trigger malicious firmware, gaining remote code execution. This vulnerability has been identified by the vendor as: V-2024-020 — Remote Code Execution.

The Really Simple Security (Free, Pro, and Pro Multisite) plugins for WordPress are vulnerable to authentication bypass in versions 9.0.0 to 9.1.1.1. This is due to improper user check error handling in the two-factor REST API actions with the 'check_login_and_get_user' function. This makes it possible for unauthenticated attackers to log in as any existing user on the site, such as an administrator, when the "Two-Factor Authentication" setting is enabled (disabled by default).

A missing authentication vulnerability in the GFIAgent component of GFI Kerio Control 9.4.5 allows unauthenticated remote attackers to perform privileged operations. The GFIAgent service, responsible for integration with GFI AppManager, exposes HTTP services on ports 7995 and 7996 without proper authentication. The /proxy handler on port 7996 allows arbitrary forwarding to administrative endpoints when provided with an Appliance UUID, which itself can be retrieved from port 7995. This results in a complete authentication bypass, permitting access to sensitive administrative APIs.

marimo is a reactive Python notebook. Prior to 0.23.0, Marimo has a Pre-Auth RCE vulnerability. The terminal WebSocket endpoint /terminal/ws lacks authentication validation, allowing an unauthenticated attacker to obtain a full PTY shell and execute arbitrary system commands. Unlike other WebSocket endpoints (e.g., /ws) that correctly call validate_auth() for authentication, the /terminal/ws endpoint only checks the running mode and platform support before accepting connections, completely skipping authentication verification. This vulnerability is fixed in 0.23.0.

CrateDB 5.5.1 is contains an authentication bypass vulnerability in the Admin UI component. After configuring password authentication and_ Local_ In the case of an address, identity authentication can be bypassed by setting the X-Real IP request header to a specific value and accessing the Admin UI directly using the default user identity.(https://github.com/crate/crate/issues/15231)

The miniOrange Social Login and Register (Discord, Google, Twitter, LinkedIn) Pro Addon plugin for WordPress is vulnerable to authentication bypass in all versions up to, and including, 200.3.9. This is due to insufficient verification on the user being returned by the social login token. This makes it possible for unauthenticated attackers to log in as any existing user on the site, such as an administrator, if they have access to the username and the user does not have an already-existing account for the service returning the token.

MERCURY MIPC252W IP camera 1.0.5 Build 230306 Rel.79931n contains an improper authentication vulnerability in the RTSP service. After successful Digest authentication in an initial DESCRIBE request, the device does not verify the Digest response parameter in subsequent RTSP requests within the same session. As a result, RTSP methods such as SETUP, PLAY, and TEARDOWN can be processed even when the Authorization header contains an empty or invalid response value, as long as the nonce and session identifier correspond to a previously authenticated session. This allows an attacker with network access to reuse session parameters and issue unauthorized RTSP control commands without computing a valid Digest response.

Weak access control in OpenText PVCS Version Manager allows potential bypassing of authentication and uploading of files.