Multiple vulnerabilities exist in the web-based management interface of Cisco Small Business RV Series Routers. A remote attacker could execute arbitrary commands or bypass authentication and upload files on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in Cisco SD-WAN vManage Software could allow an unauthenticated, remote attacker to execute arbitrary code or gain access to sensitive information, or allow an authenticated, local attacker to gain escalated privileges or gain unauthorized access to the application. For more information about these vulnerabilities, see the Details section of this advisory.

An issue was discovered on D-Link DSL-2640B B2 EU_4.01B devices. Authentication can be bypassed when accessing cgi modules. This allows one to perform administrative tasks (e.g., modify the admin password) with no authentication.

NETGEAR ProSAFE Network Management System MyHandlerInterceptor Authentication Bypass Vulnerability. This vulnerability allows remote attackers to bypass authentication on affected installations of NETGEAR ProSAFE Network Management System. Authentication is not required to exploit this vulnerability. The specific flaw exists within the MyHandlerInterceptor class. The issue results from improper implementation of the authentication mechanism. An attacker can leverage this vulnerability to bypass authentication on the system. . Was ZDI-CAN-19718.

Huawei products IPS Module; NGFW Module; NIP6300; NIP6600; NIP6800; Secospace USG6300; Secospace USG6500; Secospace USG6600; USG9500 with versions of V500R001C00; V500R001C20; V500R001C30; V500R001C50; V500R001C60; V500R001C80; V500R005C00; V500R005C10; V500R005C20; V500R002C00; V500R002C10; V500R002C20; V500R002C30 have an improper authentication vulnerability. Attackers need to perform some operations to exploit the vulnerability. Successful exploit may obtain certain permissions on the device.

An improper authentication vulnerability in FortiMail 5.4.10, 6.0.7, 6.2.2 and earlier and FortiVoiceEntreprise 6.0.0 and 6.0.1 may allow a remote unauthenticated attacker to access the system as a legitimate user by requesting a password change via the user interface.

CasaOS is an open-source Personal Cloud system. Unauthenticated attackers can craft arbitrary JWTs and access features that usually require authentication and execute arbitrary commands as `root` on CasaOS instances. This problem was addressed by improving the validation of JWTs in commit `705bf1f`. This patch is part of CasaOS 0.4.4. Users should upgrade to CasaOS 0.4.4. If they can't, they should temporarily restrict access to CasaOS to untrusted users, for instance by not exposing it publicly.

eG Manager 7.1.2 allows authentication bypass via a com.egurkha.EgLoginServlet?uname=admin&upass=&accessKey=eGm0n1t0r request.

Huawei AR3200 products with versions of V200R007C00SPC900, V200R007C00SPCa00, V200R007C00SPCb00, V200R007C00SPCc00, V200R009C00SPC500 have an improper authentication vulnerability. Attackers need to perform some operations to exploit the vulnerability. Successful exploit may obtain certain permissions on the device.

A vulnerability of Helpcom could allow an unauthenticated attacker to execute arbitrary command. This vulnerability exists due to insufficient authentication validation.

HashiCorp Nomad and Nomad Enterprise up to 0.10.2 incorrectly validated role/region associated with TLS certificates used for mTLS RPC, and were susceptible to privilege escalation. Fixed in 0.10.3.

An issue was discovered in phpABook 0.9 Intermediate. On the login page, if one sets a userInfo cookie with the value of admin+1+en (user+perms+lang), one can login as any user without a password.

A vulnerability in Trend Micro InterScan Web Security Virtual Appliance 6.5 SP2 could allow an attacker to manipulate system updates using a combination of CSRF bypass (CVE-2020-8461) and authentication bypass (CVE-2020-8464) to execute code as user root.

The Time Capsule plugin before 1.21.16 for WordPress has an authentication bypass. Any request containing IWP_JSON_PREFIX causes the client to be logged in as the first account on the list of administrator accounts.

A vulnerability in Trend Micro InterScan Web Security Virtual Appliance 6.5 may allow remote attackers to bypass authentication on affected installations of Trend Micro InterScan Web Security Virtual Appliance.

An issue was discovered in Mellium mellium.im/sasl before 0.3.1. When performing SCRAM-based SASL authentication, if the remote end advertises support for channel binding, no random nonce is generated (instead, the nonce is empty). This causes authentication to fail in the best case, but (if paired with a remote end that does not validate the length of the nonce) could lead to insufficient randomness being used during authentication.

A security vulnerability has been identified in the HPE Edgeline Infrastructure Manager, also known as HPE Edgeline Infrastructure Management Software. The vulnerability could be remotely exploited to bypass remote authentication leading to execution of arbitrary commands, gaining privileged access, causing denial of service, and changing the configuration.

CWE-287: Improper Authentication vulnerability exists which could cause the execution of commands on the webserver without authentication when sending specially crafted HTTP requests.

SSMC3.7.0.0 is vulnerable to remote authentication bypass. HPE StoreServ Management Console (SSMC) 3.7.0.0 is an off node multiarray manager web application and remains isolated from data on the managed arrays. HPE has provided an update to HPE StoreServ Management Console (SSMC) software 3.7.0.0* Upgrade to HPE 3PAR StoreServ Management Console 3.7.1.1 or later.

The User Verification WordPress plugin before 1.0.94 was affected by an Auth Bypass security vulnerability. To bypass authentication, we only need to know the user’s username. Depending on whose username we know, which can be easily queried because it is usually public data, we may even be given an administrative role on the website.

[Calendar01], [Calendar02], [PKOBO-News01], [PKOBO-vote01], [Telop01], [Gallery01], [CalendarForm01], and [Link01] [Calendar01] free edition ver1.0.0, [Calendar02] free edition ver1.0.0, [PKOBO-News01] free edition ver1.0.3 and earlier, [PKOBO-vote01] free edition ver1.0.1 and earlier, [Telop01] free edition ver1.0.0, [Gallery01] free edition ver1.0.3 and earlier, [CalendarForm01] free edition ver1.0.3 and earlier, and [Link01] free edition ver1.0.0 allows remote attackers to bypass authentication and log in to the product with administrative privileges via unspecified vectors.

Dell PowerScale OneFS, versions 8.2.x-9.3.x, contains an Improper Certificate Validation vulnerability. An remote unauthenticated attacker could potentially exploit this vulnerability, leading to a full compromise of the system.

CA Automic Automation 12.2 and 12.3 contain an authentication error vulnerability in the Automic agent that could allow a remote attacker to potentially execute arbitrary commands.

Meshtastic is an open source, off-grid, decentralized, mesh network. Meshtastic uses MQTT to communicate over an internet connection to a shared or private MQTT Server. Nodes can communicate directly via an internet connection or proxied through a connected phone (i.e., via bluetooth). Prior to version 2.5.1, multiple weaknesses in the MQTT implementation allow for authentication and authorization bypasses resulting in unauthorized control of MQTT-connected nodes. Version 2.5.1 contains a patch.

MAGMI versions prior to 0.7.24 are vulnerable to a remote authentication bypass due to allowing default credentials in the event there is a database connection failure. A remote attacker can trigger this connection failure if the Mysql setting max_connections (default 151) is lower than Apache (or another web server) setting MaxRequestWorkers (formerly MaxClients) (default 256). This can be done by sending at least 151 simultaneous requests to the Magento website to trigger a "Too many connections" error, then use default magmi:magmi basic authentication to remotely bypass authentication.

A vulnerability exists in an Orchestrator service that could allow an unauthenticated remote attacker to bypass multi-factor authentication requirements. Successful exploitation could allow an attacker to create an admin user account without the necessary multi-factor authentication, thereby compromising the integrity of secured access to the system.

IBM MQ Operator LTS 2.0.0 through 2.0.29, MQ Operator CD 3.0.0, 3.0.1, 3.1.0 through 3.1.3, 3.3.0, 3.4.0, 3.4.1, 3.5.0, 3.5.1 through 3.5.3, and MQ Operator SC2 3.2.0 through 3.2.12 Native HA CRR could be configured with a private key and chain other than the intended key which could disclose sensitive information or allow the attacker to perform unauthorized actions.

pam_krb5 authenticates a user by essentially running kinit with the password, getting a ticket-granting ticket (tgt) from the Kerberos KDC (Key Distribution Center) over the network, as a way to verify the password. However, if a keytab is not provisioned on the system, pam_krb5 has no way to validate the response from the KDC, and essentially trusts the tgt provided over the network as being valid. In a non-default FreeBSD installation that leverages pam_krb5 for authentication and does not have a keytab provisioned, an attacker that is able to control both the password and the KDC responses can return a valid tgt, allowing authentication to occur for any user on the system.

ComponentSpace.Saml2 4.4.0 Missing SSL Certificate Validation. NOTE: the vendor does not consider this a vulnerability because the report is only about use of certificates at the application layer (not the transport layer) and "Certificates are exchanged in a controlled fashion between entities within a trust relationship. This is why self-signed certificates may be used and why validating certificates isn’t as important as doing so for the transport layer certificates."

authentik is an open-source identity provider. Versions prior to 2022.11.2 and 2022.10.2 are vulnerable to unauthorized user creation and potential account takeover. With the default flows, unauthenticated users can create new accounts in authentik. If a flow exists that allows for email-verified password recovery, this can be used to overwrite the email address of admin accounts and take over their accounts. authentik 2022.11.2 and 2022.10.2 fix this issue. As a workaround, a policy can be created and bound to the `default-user-settings-flow flow` with the contents `return request.user.is_authenticated`.

An authentication bypass vulnerability exists in HPE StoreOnce Software.

Multiple NEC products (Express5800/T110j, Express5800/T110j-S, Express5800/T110j (2nd-Gen), Express5800/T110j-S (2nd-Gen), iStorage NS100Ti, and Express5800/GT110j) where Baseboard Management Controller (BMC) firmware Rev1.09 and earlier is applied allows remote attackers to bypass authentication and then obtain/modify BMC setting information, obtain monitoring information, or reboot/shut down the vulnerable product via unspecified vectors.

CAMS for HIS CENTUM CS 3000 (includes CENTUM CS 3000 Small) R3.08.10 to R3.09.50, CENTUM VP (includes CENTUM VP Small, Basic) R4.01.00 to R6.07.00, B/M9000CS R5.04.01 to R5.05.01, and B/M9000 VP R6.01.01 to R8.03.01 allows a remote unauthenticated attacker to bypass authentication and send altered communication packets via unspecified vectors.

IBM InfoSphere Data Replication 11.4 and IBM InfoSphere Change Data Capture for z/OS 10.2.1, under certain configurations, could allow a user to bypass authentication mechanisms using an empty password string. IBM X-Force ID: 189834

An issue was discovered in LIVEBOX Collaboration vDesk through v018. A Bypass of Two-Factor Authentication for SAML Users can occur under the /login/backup_code endpoint and the /api/v1/vdeskintegration/challenge endpoint. The correctness of the TOTP is not checked properly, and can be bypassed by passing any string as the backup code.

An issue was discovered in vesoft NebulaGraph through 3.8.0. It allows bypassing authentication.

In PrestaShop from version 1.5.0.0 and before version 1.7.6.6, the authentication system is malformed and an attacker is able to forge requests and execute admin commands. The problem is fixed in 1.7.6.6.

Improper authentication in Veeam Backup for Google Cloud v1.0 and v3.0 allows attackers to bypass authentication mechanisms.

DVR firmware in TAT-76 and TAT-77 series of products, provided by TONNET, contain misconfigured authentication mechanism. Attackers can crack the default password and gain access to the system.

IBM Cognos Controller 10.4.0, 10.4.1, and 10.4.2 could allow a remote attacker to bypass security restrictions, caused by improper validation of authentication cookies. IBM X-Force ID: 190847.

Improper Authentication vulnerability in Apache Solr. Solr instances using the PKIAuthenticationPlugin, which is enabled by default when Solr Authentication is used, are vulnerable to Authentication bypass. A fake ending at the end of any Solr API URL path, will allow requests to skip Authentication while maintaining the API contract with the original URL Path. This fake ending looks like an unprotected API path, however it is stripped off internally after authentication but before API routing. This issue affects Apache Solr: from 5.3.0 before 8.11.4, from 9.0.0 before 9.7.0. Users are recommended to upgrade to version 9.7.0, or 8.11.4, which fix the issue.

IBM Data Risk Manager 2.0.1, 2.0.2, 2.0.3, 2.0.4, 2.0.5, and 2.0.6 could allow a remote attacker to bypass security restrictions when configured with SAML authentication. By sending a specially crafted HTTP request, an attacker could exploit this vulnerability to bypass the authentication process and gain full administrative access to the system. IBM X-Force ID: 180532.

An issue in the helper tool of Mailbutler GmbH Shimo VPN Client for macOS v5.0.4 allows attackers to bypass authentication via PID re-use.

An issue was discovered on Dasan GPON home routers. It is possible to bypass authentication simply by appending "?images" to any URL of the device that requires authentication, as demonstrated by the /menu.html?images/ or /GponForm/diag_FORM?images/ URI. One can then manage the device.

A certificate validation issue existed in the handling of WKWebView. This issue was addressed with improved validation. This issue is fixed in tvOS 16.1, iOS 16.1 and iPadOS 16, macOS Ventura 13, watchOS 9.1. Processing a maliciously crafted certificate may lead to arbitrary code execution.

Grafana is an open source data visualization platform. In affected versions unauthenticated and authenticated users are able to view the snapshot with the lowest database key by accessing the literal paths: /dashboard/snapshot/:key, or /api/snapshots/:key. If the snapshot "public_mode" configuration setting is set to true (vs default of false), unauthenticated users are able to delete the snapshot with the lowest database key by accessing the literal path: /api/snapshots-delete/:deleteKey. Regardless of the snapshot "public_mode" setting, authenticated users are able to delete the snapshot with the lowest database key by accessing the literal paths: /api/snapshots/:key, or /api/snapshots-delete/:deleteKey. The combination of deletion and viewing enables a complete walk through all snapshot data while resulting in complete snapshot data loss. This issue has been resolved in versions 8.1.6 and 7.5.11. If for some reason you cannot upgrade you can use a reverse proxy or similar to block access to the literal paths: /api/snapshots/:key, /api/snapshots-delete/:deleteKey, /dashboard/snapshot/:key, and /api/snapshots/:key. They have no normal function and can be disabled without side effects.

Tenda 11N with firmware version V5.07.33_cn suffers from an Authentication Bypass vulnerability.

offlineimap before 6.3.4 added support for SSL server certificate validation but it is still possible to use SSL v2 protocol, which is a flawed protocol with multiple security deficiencies.

The Ultimate Membership Pro plugin for WordPress is vulnerable to Authentication Bypass in versions between, and including, 7.3 to 8.6. This makes it possible for unauthenticated attackers to login as any user, including the site administrator with a default user ID of 1, via the username or user ID.

The client in OpenSSH before 7.2 mishandles failed cookie generation for untrusted X11 forwarding and relies on the local X11 server for access-control decisions, which allows remote X11 clients to trigger a fallback and obtain trusted X11 forwarding privileges by leveraging configuration issues on this X11 server, as demonstrated by lack of the SECURITY extension on this X11 server.