In the Linux kernel, the following vulnerability has been resolved: gsmi: fix null-deref in gsmi_get_variable We can get EFI variables without fetching the attribute, so we must allow for that in gsmi. commit 859748255b43 ("efi: pstore: Omit efivars caching EFI varstore access layer") added a new get_variable call with attr=NULL, which triggers panic in gsmi.

In the Linux kernel, the following vulnerability has been resolved: media: vidtv: mux: Add check and kfree for kstrdup Add check for the return value of kstrdup() and return the error if it fails in order to avoid NULL pointer dereference. Moreover, use kfree() in the later error handling in order to avoid memory leak.

In the Linux kernel, the following vulnerability has been resolved: spi: bcm-qspi: return error if neither hif_mspi nor mspi is available If neither a "hif_mspi" nor "mspi" resource is present, the driver will just early exit in probe but still return success. Apart from not doing anything meaningful, this would then also lead to a null pointer access on removal, as platform_get_drvdata() would return NULL, which it would then try to dereference when trying to unregister the spi master. Fix this by unconditionally calling devm_ioremap_resource(), as it can handle a NULL res and will then return a viable ERR_PTR() if we get one. The "return 0;" was previously a "goto qspi_resource_err;" where then ret was returned, but since ret was still initialized to 0 at this place this was a valid conversion in 63c5395bb7a9 ("spi: bcm-qspi: Fix use-after-free on unbind"). The issue was not introduced by this commit, only made more obvious.

In the Linux kernel, the following vulnerability has been resolved: clk: mediatek: clk-mt6779: Add check for mtk_alloc_clk_data Add the check for the return value of mtk_alloc_clk_data() in order to avoid NULL pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: OPP: Fix potential null ptr dereference in dev_pm_opp_get_required_pstate() "opp" pointer is dereferenced before the IS_ERR_OR_NULL() check. Fix it by removing the dereference to cache opp_table and dereference it directly where opp_table is used. This fixes the following smatch warning: drivers/opp/core.c:232 dev_pm_opp_get_required_pstate() warn: variable dereferenced before IS_ERR check 'opp' (see line 230)

In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpm: Fix NULL pointer dereference in tcpm_pd_svdm() It is possible that typec_register_partner() returns ERR_PTR on failure. When port->partner is an error, a NULL pointer dereference may occur as shown below. [91222.095236][ T319] typec port0: failed to register partner (-17) ... [91225.061491][ T319] Unable to handle kernel NULL pointer dereference at virtual address 000000000000039f [91225.274642][ T319] pc : tcpm_pd_data_request+0x310/0x13fc [91225.274646][ T319] lr : tcpm_pd_data_request+0x298/0x13fc [91225.308067][ T319] Call trace: [91225.308070][ T319] tcpm_pd_data_request+0x310/0x13fc [91225.308073][ T319] tcpm_pd_rx_handler+0x100/0x9e8 [91225.355900][ T319] kthread_worker_fn+0x178/0x58c [91225.355902][ T319] kthread+0x150/0x200 [91225.355905][ T319] ret_from_fork+0x10/0x30 Add a check for port->partner to avoid dereferencing a NULL pointer.

In the Linux kernel, the following vulnerability has been resolved: net: wangxun: fix kernel panic due to null pointer When the device uses a custom subsystem vendor ID, the function wx_sw_init() returns before the memory of 'wx->mac_table' is allocated. The null pointer will causes the kernel panic.

In the Linux kernel, the following vulnerability has been resolved: block: be a bit more careful in checking for NULL bdev while polling Wei reports a crash with an application using polled IO: PGD 14265e067 P4D 14265e067 PUD 47ec50067 PMD 0 Oops: 0000 [#1] SMP CPU: 0 PID: 21915 Comm: iocore_0 Kdump: loaded Tainted: G S 5.12.0-0_fbk12_clang_7346_g1bb6f2e7058f #1 Hardware name: Wiwynn Delta Lake MP T8/Delta Lake-Class2, BIOS Y3DLM08 04/10/2022 RIP: 0010:bio_poll+0x25/0x200 Code: 0f 1f 44 00 00 0f 1f 44 00 00 55 41 57 41 56 41 55 41 54 53 48 83 ec 28 65 48 8b 04 25 28 00 00 00 48 89 44 24 20 48 8b 47 08 <48> 8b 80 70 02 00 00 4c 8b 70 50 8b 6f 34 31 db 83 fd ff 75 25 65 RSP: 0018:ffffc90005fafdf8 EFLAGS: 00010292 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 74b43cd65dd66600 RDX: 0000000000000003 RSI: ffffc90005fafe78 RDI: ffff8884b614e140 RBP: ffff88849964df78 R08: 0000000000000000 R09: 0000000000000008 R10: 0000000000000000 R11: 0000000000000000 R12: ffff88849964df00 R13: ffffc90005fafe78 R14: ffff888137d3c378 R15: 0000000000000001 FS: 00007fd195000640(0000) GS:ffff88903f400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000270 CR3: 0000000466121001 CR4: 00000000007706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: iocb_bio_iopoll+0x1d/0x30 io_do_iopoll+0xac/0x250 __se_sys_io_uring_enter+0x3c5/0x5a0 ? __x64_sys_write+0x89/0xd0 do_syscall_64+0x2d/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x94f225d Code: 24 cc 00 00 00 41 8b 84 24 d0 00 00 00 c1 e0 04 83 e0 10 41 09 c2 8b 33 8b 53 04 4c 8b 43 18 4c 63 4b 0c b8 aa 01 00 00 0f 05 <85> c0 0f 88 85 00 00 00 29 03 45 84 f6 0f 84 88 00 00 00 41 f6 c7 RSP: 002b:00007fd194ffcd88 EFLAGS: 00000202 ORIG_RAX: 00000000000001aa RAX: ffffffffffffffda RBX: 00007fd194ffcdc0 RCX: 00000000094f225d RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000007 RBP: 00007fd194ffcdb0 R08: 0000000000000000 R09: 0000000000000008 R10: 0000000000000001 R11: 0000000000000202 R12: 00007fd269d68030 R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000000 which is due to bio->bi_bdev being NULL. This can happen if we have two tasks doing polled IO, and task B ends up completing IO from task A if they are sharing a poll queue. If task B completes the IO and puts the bio into our cache, then it can allocate that bio again before task A is done polling for it. As that would necessitate a preempt between the two tasks, it's enough to just be a bit more careful in checking for whether or not bio->bi_bdev is NULL.

In the Linux kernel, the following vulnerability has been resolved: qed/qed_sriov: guard against NULL derefs from qed_iov_get_vf_info We have to make sure that the info returned by the helper is valid before using it. Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_rbtree: fix null deref on element insertion There is no guarantee that rb_prev() will not return NULL in nft_rbtree_gc_elem(): general protection fault, probably for non-canonical address 0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f] nft_add_set_elem+0x14b0/0x2990 nf_tables_newsetelem+0x528/0xb30 Furthermore, there is a possible use-after-free while iterating, 'node' can be free'd so we need to cache the next value to use.

In the Linux kernel, the following vulnerability has been resolved: kobject: Add sanity check for kset->kobj.ktype in kset_register() When I register a kset in the following way: static struct kset my_kset; kobject_set_name(&my_kset.kobj, "my_kset"); ret = kset_register(&my_kset); A null pointer dereference exception is occurred: [ 4453.568337] Unable to handle kernel NULL pointer dereference at \ virtual address 0000000000000028 ... ... [ 4453.810361] Call trace: [ 4453.813062] kobject_get_ownership+0xc/0x34 [ 4453.817493] kobject_add_internal+0x98/0x274 [ 4453.822005] kset_register+0x5c/0xb4 [ 4453.825820] my_kobj_init+0x44/0x1000 [my_kset] ... ... Because I didn't initialize my_kset.kobj.ktype. According to the description in Documentation/core-api/kobject.rst: - A ktype is the type of object that embeds a kobject. Every structure that embeds a kobject needs a corresponding ktype. So add sanity check to make sure kset->kobj.ktype is not NULL.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix potential null pointer derefernce The amdgpu_ras_get_context may return NULL if device not support ras feature, so add check before using.

In the Linux kernel, the following vulnerability has been resolved: sctp: check send stream number after wait_for_sndbuf This patch fixes a corner case where the asoc out stream count may change after wait_for_sndbuf. When the main thread in the client starts a connection, if its out stream count is set to N while the in stream count in the server is set to N - 2, another thread in the client keeps sending the msgs with stream number N - 1, and waits for sndbuf before processing INIT_ACK. However, after processing INIT_ACK, the out stream count in the client is shrunk to N - 2, the same to the in stream count in the server. The crash occurs when the thread waiting for sndbuf is awake and sends the msg in a non-existing stream(N - 1), the call trace is as below: KASAN: null-ptr-deref in range [0x0000000000000038-0x000000000000003f] Call Trace: <TASK> sctp_cmd_send_msg net/sctp/sm_sideeffect.c:1114 [inline] sctp_cmd_interpreter net/sctp/sm_sideeffect.c:1777 [inline] sctp_side_effects net/sctp/sm_sideeffect.c:1199 [inline] sctp_do_sm+0x197d/0x5310 net/sctp/sm_sideeffect.c:1170 sctp_primitive_SEND+0x9f/0xc0 net/sctp/primitive.c:163 sctp_sendmsg_to_asoc+0x10eb/0x1a30 net/sctp/socket.c:1868 sctp_sendmsg+0x8d4/0x1d90 net/sctp/socket.c:2026 inet_sendmsg+0x9d/0xe0 net/ipv4/af_inet.c:825 sock_sendmsg_nosec net/socket.c:722 [inline] sock_sendmsg+0xde/0x190 net/socket.c:745 The fix is to add an unlikely check for the send stream number after the thread wakes up from the wait_for_sndbuf.

In the Linux kernel, the following vulnerability has been resolved: net: phy: dp83822: Fix null pointer access on DP83825/DP83826 devices The probe() function is only used for the DP83822 PHY, leaving the private data pointer uninitialized for the smaller DP83825/26 models. While all uses of the private data structure are hidden in 82822 specific callbacks, configuring the interrupt is shared across all models. This causes a NULL pointer dereference on the smaller PHYs as it accesses the private data unchecked. Verifying the pointer avoids that.

In the Linux kernel, the following vulnerability has been resolved: net: stmmac: enable all safety features by default In the original implementation of dwmac5 commit 8bf993a5877e ("net: stmmac: Add support for DWMAC5 and implement Safety Features") all safety features were enabled by default. Later it seems some implementations didn't have support for all the features, so in commit 5ac712dcdfef ("net: stmmac: enable platform specific safety features") the safety_feat_cfg structure was added to the callback and defined for some platforms to selectively enable these safety features. The problem is that only certain platforms were given that software support. If the automotive safety package bit is set in the hardware features register the safety feature callback is called for the platform, and for platforms that didn't get a safety_feat_cfg defined this results in the following NULL pointer dereference: [ 7.933303] Call trace: [ 7.935812] dwmac5_safety_feat_config+0x20/0x170 [stmmac] [ 7.941455] __stmmac_open+0x16c/0x474 [stmmac] [ 7.946117] stmmac_open+0x38/0x70 [stmmac] [ 7.950414] __dev_open+0x100/0x1dc [ 7.954006] __dev_change_flags+0x18c/0x204 [ 7.958297] dev_change_flags+0x24/0x6c [ 7.962237] do_setlink+0x2b8/0xfa4 [ 7.965827] __rtnl_newlink+0x4ec/0x840 [ 7.969766] rtnl_newlink+0x50/0x80 [ 7.973353] rtnetlink_rcv_msg+0x12c/0x374 [ 7.977557] netlink_rcv_skb+0x5c/0x130 [ 7.981500] rtnetlink_rcv+0x18/0x2c [ 7.985172] netlink_unicast+0x2e8/0x340 [ 7.989197] netlink_sendmsg+0x1a8/0x420 [ 7.993222] ____sys_sendmsg+0x218/0x280 [ 7.997249] ___sys_sendmsg+0xac/0x100 [ 8.001103] __sys_sendmsg+0x84/0xe0 [ 8.004776] __arm64_sys_sendmsg+0x24/0x30 [ 8.008983] invoke_syscall+0x48/0x114 [ 8.012840] el0_svc_common.constprop.0+0xcc/0xec [ 8.017665] do_el0_svc+0x38/0xb0 [ 8.021071] el0_svc+0x2c/0x84 [ 8.024212] el0t_64_sync_handler+0xf4/0x120 [ 8.028598] el0t_64_sync+0x190/0x194 Go back to the original behavior, if the automotive safety package is found to be supported in hardware enable all the features unless safety_feat_cfg is passed in saying this particular platform only supports a subset of the features.

In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: avoid possible NULL skb pointer dereference In 'mwifiex_handle_uap_rx_forward()', always check the value returned by 'skb_copy()' to avoid potential NULL pointer dereference in 'mwifiex_uap_queue_bridged_pkt()', and drop original skb in case of copying failure. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: hwmon: (coretemp) Simplify platform device handling Coretemp's platform driver is unconventional. All the real work is done globally by the initcall and CPU hotplug notifiers, while the "driver" effectively just wraps an allocation and the registration of the hwmon interface in a long-winded round-trip through the driver core. The whole logic of dynamically creating and destroying platform devices to bring the interfaces up and down is error prone, since it assumes platform_device_add() will synchronously bind the driver and set drvdata before it returns, thus results in a NULL dereference if drivers_autoprobe is turned off for the platform bus. Furthermore, the unusual approach of doing that from within a CPU hotplug notifier, already commented in the code that it deadlocks suspend, also causes lockdep issues for other drivers or subsystems which may want to legitimately register a CPU hotplug notifier from a platform bus notifier. All of these issues can be solved by ripping this unusual behaviour out completely, simply tying the platform devices to the lifetime of the module itself, and directly managing the hwmon interfaces from the hotplug notifiers. There is a slight user-visible change in that /sys/bus/platform/drivers/coretemp will no longer appear, and /sys/devices/platform/coretemp.n will remain present if package n is hotplugged off, but hwmon users should really only be looking for the presence of the hwmon interfaces, whose behaviour remains unchanged.

In the Linux kernel, the following vulnerability has been resolved: wifi: nl80211: fix NULL-ptr deref in offchan check If, e.g. in AP mode, the link was already created by userspace but not activated yet, it has a chandef but the chandef isn't valid and has no channel. Check for this and ignore this link.

In the Linux kernel, the following vulnerability has been resolved: net/handshake: fix null-ptr-deref in handshake_nl_done_doit() We should not call trace_handshake_cmd_done_err() if socket lookup has failed. Also we should call trace_handshake_cmd_done_err() before releasing the file, otherwise dereferencing sock->sk can return garbage. This also reverts 7afc6d0a107f ("net/handshake: Fix uninitialized local variable") Unable to handle kernel paging request at virtual address dfff800000000003 KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f] Mem abort info: ESR = 0x0000000096000005 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x05: level 1 translation fault Data abort info: ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [dfff800000000003] address between user and kernel address ranges Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP Modules linked in: CPU: 1 PID: 5986 Comm: syz-executor292 Not tainted 6.5.0-rc7-syzkaller-gfe4469582053 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023 pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : handshake_nl_done_doit+0x198/0x9c8 net/handshake/netlink.c:193 lr : handshake_nl_done_doit+0x180/0x9c8 sp : ffff800096e37180 x29: ffff800096e37200 x28: 1ffff00012dc6e34 x27: dfff800000000000 x26: ffff800096e373d0 x25: 0000000000000000 x24: 00000000ffffffa8 x23: ffff800096e373f0 x22: 1ffff00012dc6e38 x21: 0000000000000000 x20: ffff800096e371c0 x19: 0000000000000018 x18: 0000000000000000 x17: 0000000000000000 x16: ffff800080516cc4 x15: 0000000000000001 x14: 1fffe0001b14aa3b x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000003 x8 : 0000000000000003 x7 : ffff800080afe47c x6 : 0000000000000000 x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffff800080a88078 x2 : 0000000000000001 x1 : 00000000ffffffa8 x0 : 0000000000000000 Call trace: handshake_nl_done_doit+0x198/0x9c8 net/handshake/netlink.c:193 genl_family_rcv_msg_doit net/netlink/genetlink.c:970 [inline] genl_family_rcv_msg net/netlink/genetlink.c:1050 [inline] genl_rcv_msg+0x96c/0xc50 net/netlink/genetlink.c:1067 netlink_rcv_skb+0x214/0x3c4 net/netlink/af_netlink.c:2549 genl_rcv+0x38/0x50 net/netlink/genetlink.c:1078 netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline] netlink_unicast+0x660/0x8d4 net/netlink/af_netlink.c:1365 netlink_sendmsg+0x834/0xb18 net/netlink/af_netlink.c:1914 sock_sendmsg_nosec net/socket.c:725 [inline] sock_sendmsg net/socket.c:748 [inline] ____sys_sendmsg+0x56c/0x840 net/socket.c:2494 ___sys_sendmsg net/socket.c:2548 [inline] __sys_sendmsg+0x26c/0x33c net/socket.c:2577 __do_sys_sendmsg net/socket.c:2586 [inline] __se_sys_sendmsg net/socket.c:2584 [inline] __arm64_sys_sendmsg+0x80/0x94 net/socket.c:2584 __invoke_syscall arch/arm64/kernel/syscall.c:37 [inline] invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:51 el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:136 do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:155 el0_svc+0x58/0x16c arch/arm64/kernel/entry-common.c:678 el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:696 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:591 Code: 12800108 b90043e8 910062b3 d343fe68 (387b6908)

In the Linux kernel, the following vulnerability has been resolved: trace_events_hist: add check for return value of 'create_hist_field' Function 'create_hist_field' is called recursively at trace_events_hist.c:1954 and can return NULL-value that's why we have to check it to avoid null pointer dereference. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: scsi: storvsc: Fix handling of virtual Fibre Channel timeouts Hyper-V provides the ability to connect Fibre Channel LUNs to the host system and present them in a guest VM as a SCSI device. I/O to the vFC device is handled by the storvsc driver. The storvsc driver includes a partial integration with the FC transport implemented in the generic portion of the Linux SCSI subsystem so that FC attributes can be displayed in /sys. However, the partial integration means that some aspects of vFC don't work properly. Unfortunately, a full and correct integration isn't practical because of limitations in what Hyper-V provides to the guest. In particular, in the context of Hyper-V storvsc, the FC transport timeout function fc_eh_timed_out() causes a kernel panic because it can't find the rport and dereferences a NULL pointer. The original patch that added the call from storvsc_eh_timed_out() to fc_eh_timed_out() is faulty in this regard. In many cases a timeout is due to a transient condition, so the situation can be improved by just continuing to wait like with other I/O requests issued by storvsc, and avoiding the guaranteed panic. For a permanent failure, continuing to wait may result in a hung thread instead of a panic, which again may be better. So fix the panic by removing the storvsc call to fc_eh_timed_out(). This allows storvsc to keep waiting for a response. The change has been tested by users who experienced a panic in fc_eh_timed_out() due to transient timeouts, and it solves their problem. In the future we may want to deprecate the vFC functionality in storvsc since it can't be fully fixed. But it has current users for whom it is working well enough, so it should probably stay for a while longer.

In the Linux kernel, the following vulnerability has been resolved: scsi: hisi_sas: Set debugfs_dir pointer to NULL after removing debugfs If init debugfs failed during device registration due to memory allocation failure, debugfs_remove_recursive() is called, after which debugfs_dir is not set to NULL. debugfs_remove_recursive() will be called again during device removal. As a result, illegal pointer is accessed. [ 1665.467244] hisi_sas_v3_hw 0000:b4:02.0: failed to init debugfs! ... [ 1669.836708] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a0 [ 1669.872669] pc : down_write+0x24/0x70 [ 1669.876315] lr : down_write+0x1c/0x70 [ 1669.879961] sp : ffff000036f53a30 [ 1669.883260] x29: ffff000036f53a30 x28: ffffa027c31549f8 [ 1669.888547] x27: ffffa027c3140000 x26: 0000000000000000 [ 1669.893834] x25: ffffa027bf37c270 x24: ffffa027bf37c270 [ 1669.899122] x23: ffff0000095406b8 x22: ffff0000095406a8 [ 1669.904408] x21: 0000000000000000 x20: ffffa027bf37c310 [ 1669.909695] x19: 00000000000000a0 x18: ffff8027dcd86f10 [ 1669.914982] x17: 0000000000000000 x16: 0000000000000000 [ 1669.920268] x15: 0000000000000000 x14: ffffa0274014f870 [ 1669.925555] x13: 0000000000000040 x12: 0000000000000228 [ 1669.930842] x11: 0000000000000020 x10: 0000000000000bb0 [ 1669.936129] x9 : ffff000036f537f0 x8 : ffff80273088ca10 [ 1669.941416] x7 : 000000000000001d x6 : 00000000ffffffff [ 1669.946702] x5 : ffff000008a36310 x4 : ffff80273088be00 [ 1669.951989] x3 : ffff000009513e90 x2 : 0000000000000000 [ 1669.957276] x1 : 00000000000000a0 x0 : ffffffff00000001 [ 1669.962563] Call trace: [ 1669.965000] down_write+0x24/0x70 [ 1669.968301] debugfs_remove_recursive+0x5c/0x1b0 [ 1669.972905] hisi_sas_debugfs_exit+0x24/0x30 [hisi_sas_main] [ 1669.978541] hisi_sas_v3_remove+0x130/0x150 [hisi_sas_v3_hw] [ 1669.984175] pci_device_remove+0x48/0xd8 [ 1669.988082] device_release_driver_internal+0x1b4/0x250 [ 1669.993282] device_release_driver+0x28/0x38 [ 1669.997534] pci_stop_bus_device+0x84/0xb8 [ 1670.001611] pci_stop_and_remove_bus_device_locked+0x24/0x40 [ 1670.007244] remove_store+0xfc/0x140 [ 1670.010802] dev_attr_store+0x44/0x60 [ 1670.014448] sysfs_kf_write+0x58/0x80 [ 1670.018095] kernfs_fop_write+0xe8/0x1f0 [ 1670.022000] __vfs_write+0x60/0x190 [ 1670.025472] vfs_write+0xac/0x1c0 [ 1670.028771] ksys_write+0x6c/0xd8 [ 1670.032071] __arm64_sys_write+0x24/0x30 [ 1670.035977] el0_svc_common+0x78/0x130 [ 1670.039710] el0_svc_handler+0x38/0x78 [ 1670.043442] el0_svc+0x8/0xc To fix this, set debugfs_dir to NULL after debugfs_remove_recursive().

In the Linux kernel, the following vulnerability has been resolved: media: bdisp: Add missing check for create_workqueue Add the check for the return value of the create_workqueue in order to avoid NULL pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: ALSA: hda: fix a possible null-pointer dereference due to data race in snd_hdac_regmap_sync() The variable codec->regmap is often protected by the lock codec->regmap_lock when is accessed. However, it is accessed without holding the lock when is accessed in snd_hdac_regmap_sync(): if (codec->regmap) In my opinion, this may be a harmful race, because if codec->regmap is set to NULL right after the condition is checked, a null-pointer dereference can occur in the called function regcache_sync(): map->lock(map->lock_arg); --> Line 360 in drivers/base/regmap/regcache.c To fix this possible null-pointer dereference caused by data race, the mutex_lock coverage is extended to protect the if statement as well as the function call to regcache_sync(). [ Note: the lack of the regmap_lock itself is harmless for the current codec driver implementations, as snd_hdac_regmap_sync() is only for PM runtime resume that is prohibited during the codec probe. But the change makes the whole code more consistent, so it's merged as is -- tiwai ]

In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: ensure CLM version is null-terminated to prevent stack-out-of-bounds Fix a stack-out-of-bounds read in brcmfmac that occurs when 'buf' that is not null-terminated is passed as an argument of strreplace() in brcmf_c_preinit_dcmds(). This buffer is filled with a CLM version string by memcpy() in brcmf_fil_iovar_data_get(). Ensure buf is null-terminated. Found by a modified version of syzkaller. [ 33.004414][ T1896] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available [ 33.013486][ T1896] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43236/3 wl0: Nov 30 2011 17:33:42 version 5.90.188.22 [ 33.021554][ T1896] ================================================================== [ 33.022379][ T1896] BUG: KASAN: stack-out-of-bounds in strreplace+0xf2/0x110 [ 33.023122][ T1896] Read of size 1 at addr ffffc90001d6efc8 by task kworker/0:2/1896 [ 33.023852][ T1896] [ 33.024096][ T1896] CPU: 0 PID: 1896 Comm: kworker/0:2 Tainted: G O 5.14.0+ #132 [ 33.024927][ T1896] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 [ 33.026065][ T1896] Workqueue: usb_hub_wq hub_event [ 33.026581][ T1896] Call Trace: [ 33.026896][ T1896] dump_stack_lvl+0x57/0x7d [ 33.027372][ T1896] print_address_description.constprop.0.cold+0xf/0x334 [ 33.028037][ T1896] ? strreplace+0xf2/0x110 [ 33.028403][ T1896] ? strreplace+0xf2/0x110 [ 33.028807][ T1896] kasan_report.cold+0x83/0xdf [ 33.029283][ T1896] ? strreplace+0xf2/0x110 [ 33.029666][ T1896] strreplace+0xf2/0x110 [ 33.029966][ T1896] brcmf_c_preinit_dcmds+0xab1/0xc40 [ 33.030351][ T1896] ? brcmf_c_set_joinpref_default+0x100/0x100 [ 33.030787][ T1896] ? rcu_read_lock_sched_held+0xa1/0xd0 [ 33.031223][ T1896] ? rcu_read_lock_bh_held+0xb0/0xb0 [ 33.031661][ T1896] ? lock_acquire+0x19d/0x4e0 [ 33.032091][ T1896] ? find_held_lock+0x2d/0x110 [ 33.032605][ T1896] ? brcmf_usb_deq+0x1a7/0x260 [ 33.033087][ T1896] ? brcmf_usb_rx_fill_all+0x5a/0xf0 [ 33.033582][ T1896] brcmf_attach+0x246/0xd40 [ 33.034022][ T1896] ? wiphy_new_nm+0x1476/0x1d50 [ 33.034383][ T1896] ? kmemdup+0x30/0x40 [ 33.034722][ T1896] brcmf_usb_probe+0x12de/0x1690 [ 33.035223][ T1896] ? brcmf_usbdev_qinit.constprop.0+0x470/0x470 [ 33.035833][ T1896] usb_probe_interface+0x25f/0x710 [ 33.036315][ T1896] really_probe+0x1be/0xa90 [ 33.036656][ T1896] __driver_probe_device+0x2ab/0x460 [ 33.037026][ T1896] ? usb_match_id.part.0+0x88/0xc0 [ 33.037383][ T1896] driver_probe_device+0x49/0x120 [ 33.037790][ T1896] __device_attach_driver+0x18a/0x250 [ 33.038300][ T1896] ? driver_allows_async_probing+0x120/0x120 [ 33.038986][ T1896] bus_for_each_drv+0x123/0x1a0 [ 33.039906][ T1896] ? bus_rescan_devices+0x20/0x20 [ 33.041412][ T1896] ? lockdep_hardirqs_on_prepare+0x273/0x3e0 [ 33.041861][ T1896] ? trace_hardirqs_on+0x1c/0x120 [ 33.042330][ T1896] __device_attach+0x207/0x330 [ 33.042664][ T1896] ? device_bind_driver+0xb0/0xb0 [ 33.043026][ T1896] ? kobject_uevent_env+0x230/0x12c0 [ 33.043515][ T1896] bus_probe_device+0x1a2/0x260 [ 33.043914][ T1896] device_add+0xa61/0x1ce0 [ 33.044227][ T1896] ? __mutex_unlock_slowpath+0xe7/0x660 [ 33.044891][ T1896] ? __fw_devlink_link_to_suppliers+0x550/0x550 [ 33.045531][ T1896] usb_set_configuration+0x984/0x1770 [ 33.046051][ T1896] ? kernfs_create_link+0x175/0x230 [ 33.046548][ T1896] usb_generic_driver_probe+0x69/0x90 [ 33.046931][ T1896] usb_probe_device+0x9c/0x220 [ 33.047434][ T1896] really_probe+0x1be/0xa90 [ 33.047760][ T1896] __driver_probe_device+0x2ab/0x460 [ 33.048134][ T1896] driver_probe_device+0x49/0x120 [ 33.048516][ T1896] __device_attach_driver+0x18a/0x250 [ 33.048910][ T1896] ? driver_allows_async_probing+0x120/0x120 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Fix null-ptr-deref on inode->i_op in ntfs_lookup() Syzbot reported a null-ptr-deref bug: ntfs3: loop0: Different NTFS' sector size (1024) and media sector size (512) ntfs3: loop0: Mark volume as dirty due to NTFS errors general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] RIP: 0010:d_flags_for_inode fs/dcache.c:1980 [inline] RIP: 0010:__d_add+0x5ce/0x800 fs/dcache.c:2796 Call Trace: <TASK> d_splice_alias+0x122/0x3b0 fs/dcache.c:3191 lookup_open fs/namei.c:3391 [inline] open_last_lookups fs/namei.c:3481 [inline] path_openat+0x10e6/0x2df0 fs/namei.c:3688 do_filp_open+0x264/0x4f0 fs/namei.c:3718 do_sys_openat2+0x124/0x4e0 fs/open.c:1310 do_sys_open fs/open.c:1326 [inline] __do_sys_open fs/open.c:1334 [inline] __se_sys_open fs/open.c:1330 [inline] __x64_sys_open+0x221/0x270 fs/open.c:1330 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd If the MFT record of ntfs inode is not a base record, inode->i_op can be NULL. And a null-ptr-deref may happen: ntfs_lookup() dir_search_u() # inode->i_op is set to NULL d_splice_alias() __d_add() d_flags_for_inode() # inode->i_op->get_link null-ptr-deref Fix this by adding a Check on inode->i_op before calling the d_splice_alias() function.

In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: mcs: Fix NULL pointer dereferences When system is rebooted after creating macsec interface below NULL pointer dereference crashes occurred. This patch fixes those crashes by using correct order of teardown [ 3324.406942] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 3324.415726] Mem abort info: [ 3324.418510] ESR = 0x96000006 [ 3324.421557] EC = 0x25: DABT (current EL), IL = 32 bits [ 3324.426865] SET = 0, FnV = 0 [ 3324.429913] EA = 0, S1PTW = 0 [ 3324.433047] Data abort info: [ 3324.435921] ISV = 0, ISS = 0x00000006 [ 3324.439748] CM = 0, WnR = 0 .... [ 3324.575915] Call trace: [ 3324.578353] cn10k_mdo_del_secy+0x24/0x180 [ 3324.582440] macsec_common_dellink+0xec/0x120 [ 3324.586788] macsec_notify+0x17c/0x1c0 [ 3324.590529] raw_notifier_call_chain+0x50/0x70 [ 3324.594965] call_netdevice_notifiers_info+0x34/0x7c [ 3324.599921] rollback_registered_many+0x354/0x5bc [ 3324.604616] unregister_netdevice_queue+0x88/0x10c [ 3324.609399] unregister_netdev+0x20/0x30 [ 3324.613313] otx2_remove+0x8c/0x310 [ 3324.616794] pci_device_shutdown+0x30/0x70 [ 3324.620882] device_shutdown+0x11c/0x204 [ 966.664930] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 966.673712] Mem abort info: [ 966.676497] ESR = 0x96000006 [ 966.679543] EC = 0x25: DABT (current EL), IL = 32 bits [ 966.684848] SET = 0, FnV = 0 [ 966.687895] EA = 0, S1PTW = 0 [ 966.691028] Data abort info: [ 966.693900] ISV = 0, ISS = 0x00000006 [ 966.697729] CM = 0, WnR = 0 [ 966.833467] Call trace: [ 966.835904] cn10k_mdo_stop+0x20/0xa0 [ 966.839557] macsec_dev_stop+0xe8/0x11c [ 966.843384] __dev_close_many+0xbc/0x140 [ 966.847298] dev_close_many+0x84/0x120 [ 966.851039] rollback_registered_many+0x114/0x5bc [ 966.855735] unregister_netdevice_many.part.0+0x14/0xa0 [ 966.860952] unregister_netdevice_many+0x18/0x24 [ 966.865560] macsec_notify+0x1ac/0x1c0 [ 966.869303] raw_notifier_call_chain+0x50/0x70 [ 966.873738] call_netdevice_notifiers_info+0x34/0x7c [ 966.878694] rollback_registered_many+0x354/0x5bc [ 966.883390] unregister_netdevice_queue+0x88/0x10c [ 966.888173] unregister_netdev+0x20/0x30 [ 966.892090] otx2_remove+0x8c/0x310 [ 966.895571] pci_device_shutdown+0x30/0x70 [ 966.899660] device_shutdown+0x11c/0x204 [ 966.903574] __do_sys_reboot+0x208/0x290 [ 966.907487] __arm64_sys_reboot+0x20/0x30 [ 966.911489] el0_svc_handler+0x80/0x1c0 [ 966.915316] el0_svc+0x8/0x180 [ 966.918362] Code: f9400000 f9400a64 91220014 f94b3403 (f9400060) [ 966.924448] ---[ end trace 341778e799c3d8d7 ]---

In the Linux kernel, the following vulnerability has been resolved: crypto: af_alg - Fix missing initialisation affecting gcm-aes-s390 Fix af_alg_alloc_areq() to initialise areq->first_rsgl.sgl.sgt.sgl to point to the scatterlist array in areq->first_rsgl.sgl.sgl. Without this, the gcm-aes-s390 driver will oops when it tries to do gcm_walk_start() on req->dst because req->dst is set to the value of areq->first_rsgl.sgl.sgl by _aead_recvmsg() calling aead_request_set_crypt(). The problem comes if an empty ciphertext is passed: the loop in af_alg_get_rsgl() just passes straight out and doesn't set areq->first_rsgl up. This isn't a problem on x86_64 using gcmaes_crypt_by_sg() because, as far as I can tell, that ignores req->dst and only uses req->src[*]. [*] Is this a bug in aesni-intel_glue.c? The s390x oops looks something like: Unable to handle kernel pointer dereference in virtual kernel address space Failing address: 0000000a00000000 TEID: 0000000a00000803 Fault in home space mode while using kernel ASCE. AS:00000000a43a0007 R3:0000000000000024 Oops: 003b ilc:2 [#1] SMP ... Call Trace: [<000003ff7fc3d47e>] gcm_walk_start+0x16/0x28 [aes_s390] [<00000000a2a342f2>] crypto_aead_decrypt+0x9a/0xb8 [<00000000a2a60888>] aead_recvmsg+0x478/0x698 [<00000000a2e519a0>] sock_recvmsg+0x70/0xb0 [<00000000a2e51a56>] sock_read_iter+0x76/0xa0 [<00000000a273e066>] vfs_read+0x26e/0x2a8 [<00000000a273e8c4>] ksys_read+0xbc/0x100 [<00000000a311d808>] __do_syscall+0x1d0/0x1f8 [<00000000a312ff30>] system_call+0x70/0x98 Last Breaking-Event-Address: [<000003ff7fc3e6b4>] gcm_aes_crypt+0x104/0xa68 [aes_s390]

In the Linux kernel, the following vulnerability has been resolved: icmp6: Fix null-ptr-deref of ip6_null_entry->rt6i_idev in icmp6_dev(). With some IPv6 Ext Hdr (RPL, SRv6, etc.), we can send a packet that has the link-local address as src and dst IP and will be forwarded to an external IP in the IPv6 Ext Hdr. For example, the script below generates a packet whose src IP is the link-local address and dst is updated to 11::. # for f in $(find /proc/sys/net/ -name *seg6_enabled*); do echo 1 > $f; done # python3 >>> from socket import * >>> from scapy.all import * >>> >>> SRC_ADDR = DST_ADDR = "fe80::5054:ff:fe12:3456" >>> >>> pkt = IPv6(src=SRC_ADDR, dst=DST_ADDR) >>> pkt /= IPv6ExtHdrSegmentRouting(type=4, addresses=["11::", "22::"], segleft=1) >>> >>> sk = socket(AF_INET6, SOCK_RAW, IPPROTO_RAW) >>> sk.sendto(bytes(pkt), (DST_ADDR, 0)) For such a packet, we call ip6_route_input() to look up a route for the next destination in these three functions depending on the header type. * ipv6_rthdr_rcv() * ipv6_rpl_srh_rcv() * ipv6_srh_rcv() If no route is found, ip6_null_entry is set to skb, and the following dst_input(skb) calls ip6_pkt_drop(). Finally, in icmp6_dev(), we dereference skb_rt6_info(skb)->rt6i_idev->dev as the input device is the loopback interface. Then, we have to check if skb_rt6_info(skb)->rt6i_idev is NULL or not to avoid NULL pointer deref for ip6_null_entry. BUG: kernel NULL pointer dereference, address: 0000000000000000 PF: supervisor read access in kernel mode PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 157 Comm: python3 Not tainted 6.4.0-11996-gb121d614371c #35 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:icmp6_send (net/ipv6/icmp.c:436 net/ipv6/icmp.c:503) Code: fe ff ff 48 c7 40 30 c0 86 5d 83 e8 c6 44 1c 00 e9 c8 fc ff ff 49 8b 46 58 48 83 e0 fe 0f 84 4a fb ff ff 48 8b 80 d0 00 00 00 <48> 8b 00 44 8b 88 e0 00 00 00 e9 34 fb ff ff 4d 85 ed 0f 85 69 01 RSP: 0018:ffffc90000003c70 EFLAGS: 00000286 RAX: 0000000000000000 RBX: 0000000000000001 RCX: 00000000000000e0 RDX: 0000000000000021 RSI: 0000000000000000 RDI: ffff888006d72a18 RBP: ffffc90000003d80 R08: 0000000000000000 R09: 0000000000000001 R10: ffffc90000003d98 R11: 0000000000000040 R12: ffff888006d72a10 R13: 0000000000000000 R14: ffff8880057fb800 R15: ffffffff835d86c0 FS: 00007f9dc72ee740(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000000057b2000 CR4: 00000000007506f0 PKRU: 55555554 Call Trace: <IRQ> ip6_pkt_drop (net/ipv6/route.c:4513) ipv6_rthdr_rcv (net/ipv6/exthdrs.c:640 net/ipv6/exthdrs.c:686) ip6_protocol_deliver_rcu (net/ipv6/ip6_input.c:437 (discriminator 5)) ip6_input_finish (./include/linux/rcupdate.h:781 net/ipv6/ip6_input.c:483) __netif_receive_skb_one_core (net/core/dev.c:5455) process_backlog (./include/linux/rcupdate.h:781 net/core/dev.c:5895) __napi_poll (net/core/dev.c:6460) net_rx_action (net/core/dev.c:6529 net/core/dev.c:6660) __do_softirq (./arch/x86/include/asm/jump_label.h:27 ./include/linux/jump_label.h:207 ./include/trace/events/irq.h:142 kernel/softirq.c:554) do_softirq (kernel/softirq.c:454 kernel/softirq.c:441) </IRQ> <TASK> __local_bh_enable_ip (kernel/softirq.c:381) __dev_queue_xmit (net/core/dev.c:4231) ip6_finish_output2 (./include/net/neighbour.h:544 net/ipv6/ip6_output.c:135) rawv6_sendmsg (./include/net/dst.h:458 ./include/linux/netfilter.h:303 net/ipv6/raw.c:656 net/ipv6/raw.c:914) sock_sendmsg (net/socket.c:725 net/socket.c:748) __sys_sendto (net/socket.c:2134) __x64_sys_sendto (net/socket.c:2146 net/socket.c:2142 net/socket.c:2142) do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120) RIP: 0033:0x7f9dc751baea Code: d8 64 89 02 48 c7 c0 ff f ---truncated---

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Disable MACsec offload for uplink representor profile MACsec offload is not supported in switchdev mode for uplink representors. When switching to the uplink representor profile, the MACsec offload feature must be cleared from the netdevice's features. If left enabled, attempts to add offloads result in a null pointer dereference, as the uplink representor does not support MACsec offload even though the feature bit remains set. Clear NETIF_F_HW_MACSEC in mlx5e_fix_uplink_rep_features(). Kernel log: Oops: general protection fault, probably for non-canonical address 0xdffffc000000000f: 0000 [#1] SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000078-0x000000000000007f] CPU: 29 UID: 0 PID: 4714 Comm: ip Not tainted 6.14.0-rc4_for_upstream_debug_2025_03_02_17_35 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:__mutex_lock+0x128/0x1dd0 Code: d0 7c 08 84 d2 0f 85 ad 15 00 00 8b 35 91 5c fe 03 85 f6 75 29 49 8d 7e 60 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 a6 15 00 00 4d 3b 76 60 0f 85 fd 0b 00 00 65 ff RSP: 0018:ffff888147a4f160 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000001 RDX: 000000000000000f RSI: 0000000000000000 RDI: 0000000000000078 RBP: ffff888147a4f2e0 R08: ffffffffa05d2c19 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: dffffc0000000000 R14: 0000000000000018 R15: ffff888152de0000 FS: 00007f855e27d800(0000) GS:ffff88881ee80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000004e5768 CR3: 000000013ae7c005 CR4: 0000000000372eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 Call Trace: <TASK> ? die_addr+0x3d/0xa0 ? exc_general_protection+0x144/0x220 ? asm_exc_general_protection+0x22/0x30 ? mlx5e_macsec_add_secy+0xf9/0x700 [mlx5_core] ? __mutex_lock+0x128/0x1dd0 ? lockdep_set_lock_cmp_fn+0x190/0x190 ? mlx5e_macsec_add_secy+0xf9/0x700 [mlx5_core] ? mutex_lock_io_nested+0x1ae0/0x1ae0 ? lock_acquire+0x1c2/0x530 ? macsec_upd_offload+0x145/0x380 ? lockdep_hardirqs_on_prepare+0x400/0x400 ? kasan_save_stack+0x30/0x40 ? kasan_save_stack+0x20/0x40 ? kasan_save_track+0x10/0x30 ? __kasan_kmalloc+0x77/0x90 ? __kmalloc_noprof+0x249/0x6b0 ? genl_family_rcv_msg_attrs_parse.constprop.0+0xb5/0x240 ? mlx5e_macsec_add_secy+0xf9/0x700 [mlx5_core] mlx5e_macsec_add_secy+0xf9/0x700 [mlx5_core] ? mlx5e_macsec_add_rxsa+0x11a0/0x11a0 [mlx5_core] macsec_update_offload+0x26c/0x820 ? macsec_set_mac_address+0x4b0/0x4b0 ? lockdep_hardirqs_on_prepare+0x284/0x400 ? _raw_spin_unlock_irqrestore+0x47/0x50 macsec_upd_offload+0x2c8/0x380 ? macsec_update_offload+0x820/0x820 ? __nla_parse+0x22/0x30 ? genl_family_rcv_msg_attrs_parse.constprop.0+0x15e/0x240 genl_family_rcv_msg_doit+0x1cc/0x2a0 ? genl_family_rcv_msg_attrs_parse.constprop.0+0x240/0x240 ? cap_capable+0xd4/0x330 genl_rcv_msg+0x3ea/0x670 ? genl_family_rcv_msg_dumpit+0x2a0/0x2a0 ? lockdep_set_lock_cmp_fn+0x190/0x190 ? macsec_update_offload+0x820/0x820 netlink_rcv_skb+0x12b/0x390 ? genl_family_rcv_msg_dumpit+0x2a0/0x2a0 ? netlink_ack+0xd80/0xd80 ? rwsem_down_read_slowpath+0xf90/0xf90 ? netlink_deliver_tap+0xcd/0xac0 ? netlink_deliver_tap+0x155/0xac0 ? _copy_from_iter+0x1bb/0x12c0 genl_rcv+0x24/0x40 netlink_unicast+0x440/0x700 ? netlink_attachskb+0x760/0x760 ? lock_acquire+0x1c2/0x530 ? __might_fault+0xbb/0x170 netlink_sendmsg+0x749/0xc10 ? netlink_unicast+0x700/0x700 ? __might_fault+0xbb/0x170 ? netlink_unicast+0x700/0x700 __sock_sendmsg+0xc5/0x190 ____sys_sendmsg+0x53f/0x760 ? import_iovec+0x7/0x10 ? kernel_sendmsg+0x30/0x30 ? __copy_msghdr+0x3c0/0x3c0 ? filter_irq_stacks+0x90/0x90 ? stack_depot_save_flags+0x28/0xa30 ___sys_sen ---truncated---

In the Linux kernel, the following vulnerability has been resolved: can: gs_usb: fix time stamp counter initialization If the gs_usb device driver is unloaded (or unbound) before the interface is shut down, the USB stack first calls the struct usb_driver::disconnect and then the struct net_device_ops::ndo_stop callback. In gs_usb_disconnect() all pending bulk URBs are killed, i.e. no more RX'ed CAN frames are send from the USB device to the host. Later in gs_can_close() a reset control message is send to each CAN channel to remove the controller from the CAN bus. In this race window the USB device can still receive CAN frames from the bus and internally queue them to be send to the host. At least in the current version of the candlelight firmware, the queue of received CAN frames is not emptied during the reset command. After loading (or binding) the gs_usb driver, new URBs are submitted during the struct net_device_ops::ndo_open callback and the candlelight firmware starts sending its already queued CAN frames to the host. However, this scenario was not considered when implementing the hardware timestamp function. The cycle counter/time counter infrastructure is set up (gs_usb_timestamp_init()) after the USBs are submitted, resulting in a NULL pointer dereference if timecounter_cyc2time() (via the call chain: gs_usb_receive_bulk_callback() -> gs_usb_set_timestamp() -> gs_usb_skb_set_timestamp()) is called too early. Move the gs_usb_timestamp_init() function before the URBs are submitted to fix this problem. For a comprehensive solution, we need to consider gs_usb devices with more than 1 channel. The cycle counter/time counter infrastructure is setup per channel, but the RX URBs are per device. Once gs_can_open() of _a_ channel has been called, and URBs have been submitted, the gs_usb_receive_bulk_callback() can be called for _all_ available channels, even for channels that are not running, yet. As cycle counter/time counter has not set up, this will again lead to a NULL pointer dereference. Convert the cycle counter/time counter from a "per channel" to a "per device" functionality. Also set it up, before submitting any URBs to the device. Further in gs_usb_receive_bulk_callback(), don't process any URBs for not started CAN channels, only resubmit the URB.

In the Linux kernel, the following vulnerability has been resolved: x86/i8259: Mark legacy PIC interrupts with IRQ_LEVEL Baoquan reported that after triggering a crash the subsequent crash-kernel fails to boot about half of the time. It triggers a NULL pointer dereference in the periodic tick code. This happens because the legacy timer interrupt (IRQ0) is resent in software which happens in soft interrupt (tasklet) context. In this context get_irq_regs() returns NULL which leads to the NULL pointer dereference. The reason for the resend is a spurious APIC interrupt on the IRQ0 vector which is captured and leads to a resend when the legacy timer interrupt is enabled. This is wrong because the legacy PIC interrupts are level triggered and therefore should never be resent in software, but nothing ever sets the IRQ_LEVEL flag on those interrupts, so the core code does not know about their trigger type. Ensure that IRQ_LEVEL is set when the legacy PCI interrupts are set up.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix potential null dereference The adev->dm.dc pointer can be NULL and dereferenced in amdgpu_dm_fini() without checking. Add a NULL pointer check before calling dc_dmub_srv_destroy(). Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix NULL pointer dereference in smb2_get_info_filesystem() If share is , share->path is NULL and it cause NULL pointer dereference issue.

In the Linux kernel, the following vulnerability has been resolved: ALSA: ac97: Fix possible NULL dereference in snd_ac97_mixer smatch error: sound/pci/ac97/ac97_codec.c:2354 snd_ac97_mixer() error: we previously assumed 'rac97' could be null (see line 2072) remove redundant assignment, return error if rac97 is NULL.

In the Linux kernel, the following vulnerability has been resolved: blk-mq: fix NULL dereference on q->elevator in blk_mq_elv_switch_none After grabbing q->sysfs_lock, q->elevator may become NULL because of elevator switch. Fix the NULL dereference on q->elevator by checking it with lock.

In the Linux kernel, the following vulnerability has been resolved: drm/ttm: fix bulk_move corruption when adding a entry When the resource is the first in the bulk_move range, adding it again (thus moving it to the tail) will corrupt the list since the first pointer is not moved. This eventually lead to null pointer deref in ttm_lru_bulk_move_del()

In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: Don't attempt to resume the ports before they exist This will fix null pointer dereference that was caused by the driver attempting to resume ports that were not yet registered.

In the Linux kernel, the following vulnerability has been resolved: drm/msm/dsi: Add missing check for alloc_ordered_workqueue Add check for the return value of alloc_ordered_workqueue as it may return NULL pointer and cause NULL pointer dereference. Patchwork: https://patchwork.freedesktop.org/patch/517646/

In the Linux kernel, the following vulnerability has been resolved: btrfs: avoid NULL pointer dereference if no valid csum tree [BUG] When trying read-only scrub on a btrfs with rescue=idatacsums mount option, it will crash with the following call trace: BUG: kernel NULL pointer dereference, address: 0000000000000208 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page CPU: 1 UID: 0 PID: 835 Comm: btrfs Tainted: G O 6.15.0-rc3-custom+ #236 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022 RIP: 0010:btrfs_lookup_csums_bitmap+0x49/0x480 [btrfs] Call Trace: <TASK> scrub_find_fill_first_stripe+0x35b/0x3d0 [btrfs] scrub_simple_mirror+0x175/0x290 [btrfs] scrub_stripe+0x5f7/0x6f0 [btrfs] scrub_chunk+0x9a/0x150 [btrfs] scrub_enumerate_chunks+0x333/0x660 [btrfs] btrfs_scrub_dev+0x23e/0x600 [btrfs] btrfs_ioctl+0x1dcf/0x2f80 [btrfs] __x64_sys_ioctl+0x97/0xc0 do_syscall_64+0x4f/0x120 entry_SYSCALL_64_after_hwframe+0x76/0x7e [CAUSE] Mount option "rescue=idatacsums" will completely skip loading the csum tree, so that any data read will not find any data csum thus we will ignore data checksum verification. Normally call sites utilizing csum tree will check the fs state flag NO_DATA_CSUMS bit, but unfortunately scrub does not check that bit at all. This results in scrub to call btrfs_search_slot() on a NULL pointer and triggered above crash. [FIX] Check both extent and csum tree root before doing any tree search.

In the Linux kernel, the following vulnerability has been resolved: nvme-tcp: don't access released socket during error recovery While the error recovery work is temporarily failing reconnect attempts, running the 'nvme list' command causes a kernel NULL pointer dereference by calling getsockname() with a released socket. During error recovery work, the nvme tcp socket is released and a new one created, so it is not safe to access the socket without proper check.

In the Linux kernel, the following vulnerability has been resolved: scsi: iscsi_tcp: Check that sock is valid before iscsi_set_param() The validity of sock should be checked before assignment to avoid incorrect values. Commit 57569c37f0ad ("scsi: iscsi: iscsi_tcp: Fix null-ptr-deref while calling getpeername()") introduced this change which may lead to inconsistent values of tcp_sw_conn->sendpage and conn->datadgst_en. Fix the issue by moving the position of the assignment.

In the Linux kernel, the following vulnerability has been resolved: media: platform: mediatek: vpu: fix NULL ptr dereference If pdev is NULL, then it is still dereferenced. This fixes this smatch warning: drivers/media/platform/mediatek/vpu/mtk_vpu.c:570 vpu_load_firmware() warn: address of NULL pointer 'pdev'

In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: Avoid NULL pointer access during management transmit cleanup Currently 'ar' reference is not added in skb_cb. Though this is generally not used during transmit completion callbacks, on interface removal the remaining idr cleanup callback uses the ar pointer from skb_cb from management txmgmt_idr. Hence fill them during transmit call for proper usage to avoid NULL pointer dereference. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1

In the Linux kernel, the following vulnerability has been resolved: clk: mediatek: clk-mt2701: Add check for mtk_alloc_clk_data Add the check for the return value of mtk_alloc_clk_data() in order to avoid NULL pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: ionic: catch failure from devlink_alloc Add a check for NULL on the alloc return. If devlink_alloc() fails and we try to use devlink_priv() on the NULL return, the kernel gets very unhappy and panics. With this fix, the driver load will still fail, but at least it won't panic the kernel.

In the Linux kernel, the following vulnerability has been resolved: media: vsp1: Replace vb2_is_streaming() with vb2_start_streaming_called() The vsp1 driver uses the vb2_is_streaming() function in its .buf_queue() handler to check if the .start_streaming() operation has been called, and decide whether to just add the buffer to an internal queue, or also trigger a hardware run. vb2_is_streaming() relies on the vb2_queue structure's streaming field, which used to be set only after calling the .start_streaming() operation. Commit a10b21532574 ("media: vb2: add (un)prepare_streaming queue ops") changed this, setting the .streaming field in vb2_core_streamon() before enqueuing buffers to the driver and calling .start_streaming(). This broke the vsp1 driver which now believes that .start_streaming() has been called when it hasn't, leading to a crash: [ 881.058705] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020 [ 881.067495] Mem abort info: [ 881.070290] ESR = 0x0000000096000006 [ 881.074042] EC = 0x25: DABT (current EL), IL = 32 bits [ 881.079358] SET = 0, FnV = 0 [ 881.082414] EA = 0, S1PTW = 0 [ 881.085558] FSC = 0x06: level 2 translation fault [ 881.090439] Data abort info: [ 881.093320] ISV = 0, ISS = 0x00000006 [ 881.097157] CM = 0, WnR = 0 [ 881.100126] user pgtable: 4k pages, 48-bit VAs, pgdp=000000004fa51000 [ 881.106573] [0000000000000020] pgd=080000004f36e003, p4d=080000004f36e003, pud=080000004f7ec003, pmd=0000000000000000 [ 881.117217] Internal error: Oops: 0000000096000006 [#1] PREEMPT SMP [ 881.123494] Modules linked in: rcar_fdp1 v4l2_mem2mem [ 881.128572] CPU: 0 PID: 1271 Comm: yavta Tainted: G B 6.2.0-rc1-00023-g6c94e2e99343 #556 [ 881.138061] Hardware name: Renesas Salvator-X 2nd version board based on r8a77965 (DT) [ 881.145981] pstate: 400000c5 (nZcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 881.152951] pc : vsp1_dl_list_add_body+0xa8/0xe0 [ 881.157580] lr : vsp1_dl_list_add_body+0x34/0xe0 [ 881.162206] sp : ffff80000c267710 [ 881.165522] x29: ffff80000c267710 x28: ffff000010938ae8 x27: ffff000013a8dd98 [ 881.172683] x26: ffff000010938098 x25: ffff000013a8dc00 x24: ffff000010ed6ba8 [ 881.179841] x23: ffff00000faa4000 x22: 0000000000000000 x21: 0000000000000020 [ 881.186998] x20: ffff00000faa4000 x19: 0000000000000000 x18: 0000000000000000 [ 881.194154] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 [ 881.201309] x14: 0000000000000000 x13: 746e696174206c65 x12: ffff70000157043d [ 881.208465] x11: 1ffff0000157043c x10: ffff70000157043c x9 : dfff800000000000 [ 881.215622] x8 : ffff80000ab821e7 x7 : 00008ffffea8fbc4 x6 : 0000000000000001 [ 881.222779] x5 : ffff80000ab821e0 x4 : ffff70000157043d x3 : 0000000000000020 [ 881.229936] x2 : 0000000000000020 x1 : ffff00000e4f6400 x0 : 0000000000000000 [ 881.237092] Call trace: [ 881.239542] vsp1_dl_list_add_body+0xa8/0xe0 [ 881.243822] vsp1_video_pipeline_run+0x270/0x2a0 [ 881.248449] vsp1_video_buffer_queue+0x1c0/0x1d0 [ 881.253076] __enqueue_in_driver+0xbc/0x260 [ 881.257269] vb2_start_streaming+0x48/0x200 [ 881.261461] vb2_core_streamon+0x13c/0x280 [ 881.265565] vb2_streamon+0x3c/0x90 [ 881.269064] vsp1_video_streamon+0x2fc/0x3e0 [ 881.273344] v4l_streamon+0x50/0x70 [ 881.276844] __video_do_ioctl+0x2bc/0x5d0 [ 881.280861] video_usercopy+0x2a8/0xc80 [ 881.284704] video_ioctl2+0x20/0x40 [ 881.288201] v4l2_ioctl+0xa4/0xc0 [ 881.291525] __arm64_sys_ioctl+0xe8/0x110 [ 881.295543] invoke_syscall+0x68/0x190 [ 881.299303] el0_svc_common.constprop.0+0x88/0x170 [ 881.304105] do_el0_svc+0x4c/0xf0 [ 881.307430] el0_svc+0x4c/0xa0 [ 881.310494] el0t_64_sync_handler+0xbc/0x140 [ 881.314773] el0t_64_sync+0x190/0x194 [ 881.318450] Code: d50323bf d65f03c0 91008263 f9800071 (885f7c60) [ 881.324551] ---[ end trace 0000000000000000 ]--- [ 881.329173] note: yavta[1271] exited with preempt_count 1 A different r ---truncated---

In the Linux kernel, the following vulnerability has been resolved: scsi: libfc: Fix potential NULL pointer dereference in fc_lport_ptp_setup() fc_lport_ptp_setup() did not check the return value of fc_rport_create() which can return NULL and would cause a NULL pointer dereference. Address this issue by checking return value of fc_rport_create() and log error message on fc_rport_create() failed.

In the Linux kernel, the following vulnerability has been resolved: nfc: nci: fix possible NULL pointer dereference in send_acknowledge() Handle memory allocation failure from nci_skb_alloc() (calling alloc_skb()) to avoid possible NULL pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: Drivers: vmbus: Check for channel allocation before looking up relids relid2channel() assumes vmbus channel array to be allocated when called. However, in cases such as kdump/kexec, not all relids will be reset by the host. When the second kernel boots and if the guest receives a vmbus interrupt during vmbus driver initialization before vmbus_connect() is called, before it finishes, or if it fails, the vmbus interrupt service routine is called which in turn calls relid2channel() and can cause a null pointer dereference. Print a warning and error out in relid2channel() for a channel id that's invalid in the second kernel.