In the Linux kernel, the following vulnerability has been resolved: pcmcia: Fix a NULL pointer dereference in __iodyn_find_io_region() In __iodyn_find_io_region(), pcmcia_make_resource() is assigned to res and used in pci_bus_alloc_resource(). There is a dereference of res in pci_bus_alloc_resource(), which could lead to a NULL pointer dereference on failure of pcmcia_make_resource(). Fix this bug by adding a check of res.

In the Linux kernel, the following vulnerability has been resolved: cifs: prevent NULL pointer dereference in UTF16 conversion There can be a NULL pointer dereference bug here. NULL is passed to __cifs_sfu_make_node without checks, which passes it unchecked to cifs_strndup_to_utf16, which in turn passes it to cifs_local_to_utf16_bytes where '*from' is dereferenced, causing a crash. This patch adds a check for NULL 'src' in cifs_strndup_to_utf16 and returns NULL early to prevent dereferencing NULL pointer. Found by Linux Verification Center (linuxtesting.org) with SVACE

In the Linux kernel, the following vulnerability has been resolved: smb: server: split ksmbd_rdma_stop_listening() out of ksmbd_rdma_destroy() We can't call destroy_workqueue(smb_direct_wq); before stop_sessions()! Otherwise already existing connections try to use smb_direct_wq as a NULL pointer.

In the Linux kernel, the following vulnerability has been resolved: vxlan: Fix NPD when refreshing an FDB entry with a nexthop object VXLAN FDB entries can point to either a remote destination or an FDB nexthop group. The latter is usually used in EVPN deployments where learning is disabled. However, when learning is enabled, an incoming packet might try to refresh an FDB entry that points to an FDB nexthop group and therefore does not have a remote. Such packets should be dropped, but they are only dropped after dereferencing the non-existent remote, resulting in a NPD [1] which can be reproduced using [2]. Fix by dropping such packets earlier. Remove the misleading comment from first_remote_rcu(). [1] BUG: kernel NULL pointer dereference, address: 0000000000000000 [...] CPU: 13 UID: 0 PID: 361 Comm: mausezahn Not tainted 6.17.0-rc1-virtme-g9f6b606b6b37 #1 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-4.fc41 04/01/2014 RIP: 0010:vxlan_snoop+0x98/0x1e0 [...] Call Trace: <TASK> vxlan_encap_bypass+0x209/0x240 encap_bypass_if_local+0xb1/0x100 vxlan_xmit_one+0x1375/0x17e0 vxlan_xmit+0x6b4/0x15f0 dev_hard_start_xmit+0x5d/0x1c0 __dev_queue_xmit+0x246/0xfd0 packet_sendmsg+0x113a/0x1850 __sock_sendmsg+0x38/0x70 __sys_sendto+0x126/0x180 __x64_sys_sendto+0x24/0x30 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x4b/0x53 [2] #!/bin/bash ip address add 192.0.2.1/32 dev lo ip address add 192.0.2.2/32 dev lo ip nexthop add id 1 via 192.0.2.3 fdb ip nexthop add id 10 group 1 fdb ip link add name vx0 up type vxlan id 10010 local 192.0.2.1 dstport 12345 localbypass ip link add name vx1 up type vxlan id 10020 local 192.0.2.2 dstport 54321 learning bridge fdb add 00:11:22:33:44:55 dev vx0 self static dst 192.0.2.2 port 54321 vni 10020 bridge fdb add 00:aa:bb:cc:dd:ee dev vx1 self static nhid 10 mausezahn vx0 -a 00:aa:bb:cc:dd:ee -b 00:11:22:33:44:55 -c 1 -q

In the Linux kernel, the following vulnerability has been resolved: net: xilinx: axienet: Add error handling for RX metadata pointer retrieval Add proper error checking for dmaengine_desc_get_metadata_ptr() which can return an error pointer and lead to potential crashes or undefined behaviour if the pointer retrieval fails. Properly handle the error by unmapping DMA buffer, freeing the skb and returning early to prevent further processing with invalid data.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: check if hubbub is NULL in debugfs/amdgpu_dm_capabilities HUBBUB structure is not initialized on DCE hardware, so check if it is NULL to avoid null dereference while accessing amdgpu_dm_capabilities file in debugfs.

In the Linux kernel, the following vulnerability has been resolved: hfs: fix general protection fault in hfs_find_init() The hfs_find_init() method can trigger the crash if tree pointer is NULL: [ 45.746290][ T9787] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000008: 0000 [#1] SMP KAI [ 45.747287][ T9787] KASAN: null-ptr-deref in range [0x0000000000000040-0x0000000000000047] [ 45.748716][ T9787] CPU: 2 UID: 0 PID: 9787 Comm: repro Not tainted 6.16.0-rc3 #10 PREEMPT(full) [ 45.750250][ T9787] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 45.751983][ T9787] RIP: 0010:hfs_find_init+0x86/0x230 [ 45.752834][ T9787] Code: c1 ea 03 80 3c 02 00 0f 85 9a 01 00 00 4c 8d 6b 40 48 c7 45 18 00 00 00 00 48 b8 00 00 00 00 00 fc [ 45.755574][ T9787] RSP: 0018:ffffc90015157668 EFLAGS: 00010202 [ 45.756432][ T9787] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff819a4d09 [ 45.757457][ T9787] RDX: 0000000000000008 RSI: ffffffff819acd3a RDI: ffffc900151576e8 [ 45.758282][ T9787] RBP: ffffc900151576d0 R08: 0000000000000005 R09: 0000000000000000 [ 45.758943][ T9787] R10: 0000000080000000 R11: 0000000000000001 R12: 0000000000000004 [ 45.759619][ T9787] R13: 0000000000000040 R14: ffff88802c50814a R15: 0000000000000000 [ 45.760293][ T9787] FS: 00007ffb72734540(0000) GS:ffff8880cec64000(0000) knlGS:0000000000000000 [ 45.761050][ T9787] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 45.761606][ T9787] CR2: 00007f9bd8225000 CR3: 000000010979a000 CR4: 00000000000006f0 [ 45.762286][ T9787] Call Trace: [ 45.762570][ T9787] <TASK> [ 45.762824][ T9787] hfs_ext_read_extent+0x190/0x9d0 [ 45.763269][ T9787] ? submit_bio_noacct_nocheck+0x2dd/0xce0 [ 45.763766][ T9787] ? __pfx_hfs_ext_read_extent+0x10/0x10 [ 45.764250][ T9787] hfs_get_block+0x55f/0x830 [ 45.764646][ T9787] block_read_full_folio+0x36d/0x850 [ 45.765105][ T9787] ? __pfx_hfs_get_block+0x10/0x10 [ 45.765541][ T9787] ? const_folio_flags+0x5b/0x100 [ 45.765972][ T9787] ? __pfx_hfs_read_folio+0x10/0x10 [ 45.766415][ T9787] filemap_read_folio+0xbe/0x290 [ 45.766840][ T9787] ? __pfx_filemap_read_folio+0x10/0x10 [ 45.767325][ T9787] ? __filemap_get_folio+0x32b/0xbf0 [ 45.767780][ T9787] do_read_cache_folio+0x263/0x5c0 [ 45.768223][ T9787] ? __pfx_hfs_read_folio+0x10/0x10 [ 45.768666][ T9787] read_cache_page+0x5b/0x160 [ 45.769070][ T9787] hfs_btree_open+0x491/0x1740 [ 45.769481][ T9787] hfs_mdb_get+0x15e2/0x1fb0 [ 45.769877][ T9787] ? __pfx_hfs_mdb_get+0x10/0x10 [ 45.770316][ T9787] ? find_held_lock+0x2b/0x80 [ 45.770731][ T9787] ? lockdep_init_map_type+0x5c/0x280 [ 45.771200][ T9787] ? lockdep_init_map_type+0x5c/0x280 [ 45.771674][ T9787] hfs_fill_super+0x38e/0x720 [ 45.772092][ T9787] ? __pfx_hfs_fill_super+0x10/0x10 [ 45.772549][ T9787] ? snprintf+0xbe/0x100 [ 45.772931][ T9787] ? __pfx_snprintf+0x10/0x10 [ 45.773350][ T9787] ? do_raw_spin_lock+0x129/0x2b0 [ 45.773796][ T9787] ? find_held_lock+0x2b/0x80 [ 45.774215][ T9787] ? set_blocksize+0x40a/0x510 [ 45.774636][ T9787] ? sb_set_blocksize+0x176/0x1d0 [ 45.775087][ T9787] ? setup_bdev_super+0x369/0x730 [ 45.775533][ T9787] get_tree_bdev_flags+0x384/0x620 [ 45.775985][ T9787] ? __pfx_hfs_fill_super+0x10/0x10 [ 45.776453][ T9787] ? __pfx_get_tree_bdev_flags+0x10/0x10 [ 45.776950][ T9787] ? bpf_lsm_capable+0x9/0x10 [ 45.777365][ T9787] ? security_capable+0x80/0x260 [ 45.777803][ T9787] vfs_get_tree+0x8e/0x340 [ 45.778203][ T9787] path_mount+0x13de/0x2010 [ 45.778604][ T9787] ? kmem_cache_free+0x2b0/0x4c0 [ 45.779052][ T9787] ? __pfx_path_mount+0x10/0x10 [ 45.779480][ T9787] ? getname_flags.part.0+0x1c5/0x550 [ 45.779954][ T9787] ? putname+0x154/0x1a0 [ 45.780335][ T9787] __x64_sys_mount+0x27b/0x300 [ 45.780758][ T9787] ? __pfx___x64_sys_mount+0x10/0x10 [ 45.781232][ T9787] ---truncated---

In the Linux kernel, the following vulnerability has been resolved: media: venus: protect against spurious interrupts during probe Make sure the interrupt handler is initialized before the interrupt is registered. If the IRQ is registered before hfi_create(), it's possible that an interrupt fires before the handler setup is complete, leading to a NULL dereference. This error condition has been observed during system boot on Rb3Gen2.

In the Linux kernel, the following vulnerability has been resolved: drm/exynos: exynos7_drm_decon: add vblank check in IRQ handling If there's support for another console device (such as a TTY serial), the kernel occasionally panics during boot. The panic message and a relevant snippet of the call stack is as follows: Unable to handle kernel NULL pointer dereference at virtual address 000000000000000 Call trace: drm_crtc_handle_vblank+0x10/0x30 (P) decon_irq_handler+0x88/0xb4 [...] Otherwise, the panics don't happen. This indicates that it's some sort of race condition. Add a check to validate if the drm device can handle vblanks before calling drm_crtc_handle_vblank() to avoid this.

In the Linux kernel, the following vulnerability has been resolved: spi: stm32: Check for cfg availability in stm32_spi_probe The stm32_spi_probe function now includes a check to ensure that the pointer returned by of_device_get_match_data is not NULL before accessing its members. This resolves a warning where a potential NULL pointer dereference could occur when accessing cfg->has_device_mode. Before accessing the 'has_device_mode' member, we verify that 'cfg' is not NULL. If 'cfg' is NULL, an error message is logged. This change ensures that the driver does not attempt to access configuration data if it is not available, thus preventing a potential system crash due to a NULL pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: Revert "drm/prime: Use dma_buf from GEM object instance" This reverts commit f83a9b8c7fd0557b0c50784bfdc1bbe9140c9bf8. The dma_buf field in struct drm_gem_object is not stable over the object instance's lifetime. The field becomes NULL when user space releases the final GEM handle on the buffer object. This resulted in a NULL-pointer deref. Workarounds in commit 5307dce878d4 ("drm/gem: Acquire references on GEM handles for framebuffers") and commit f6bfc9afc751 ("drm/framebuffer: Acquire internal references on GEM handles") only solved the problem partially. They especially don't work for buffer objects without a DRM framebuffer associated. Hence, this revert to going back to using .import_attach->dmabuf. v3: - cc stable

In the Linux kernel, the following vulnerability has been resolved: mm/slub: avoid accessing metadata when pointer is invalid in object_err() object_err() reports details of an object for further debugging, such as the freelist pointer, redzone, etc. However, if the pointer is invalid, attempting to access object metadata can lead to a crash since it does not point to a valid object. One known path to the crash is when alloc_consistency_checks() determines the pointer to the allocated object is invalid because of a freelist corruption, and calls object_err() to report it. The debug code should report and handle the corruption gracefully and not crash in the process. In case the pointer is NULL or check_valid_pointer() returns false for the pointer, only print the pointer value and skip accessing metadata.

In the Linux kernel, the following vulnerability has been resolved: can: netlink: can_changelink(): fix NULL pointer deref of struct can_priv::do_set_mode Andrei Lalaev reported a NULL pointer deref when a CAN device is restarted from Bus Off and the driver does not implement the struct can_priv::do_set_mode callback. There are 2 code path that call struct can_priv::do_set_mode: - directly by a manual restart from the user space, via can_changelink() - delayed automatic restart after bus off (deactivated by default) To prevent the NULL pointer deference, refuse a manual restart or configure the automatic restart delay in can_changelink() and report the error via extack to user space. As an additional safety measure let can_restart() return an error if can_priv::do_set_mode is not set instead of dereferencing it unchecked.

In the Linux kernel, the following vulnerability has been resolved: ASoC: core: Check for rtd == NULL in snd_soc_remove_pcm_runtime() snd_soc_remove_pcm_runtime() might be called with rtd == NULL which will leads to null pointer dereference. This was reproduced with topology loading and marking a link as ignore due to missing hardware component on the system. On module removal the soc_tplg_remove_link() would call snd_soc_remove_pcm_runtime() with rtd == NULL since the link was ignored, no runtime was created.

In the Linux kernel, the following vulnerability has been resolved: usb: chipidea: ci_hdrc_imx: fix usbmisc handling usbmisc is an optional device property so it is totally valid for the corresponding data->usbmisc_data to have a NULL value. Check that before dereferencing the pointer. Found by Linux Verification Center (linuxtesting.org) with Svace static analysis tool.

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7925: prevent NULL pointer dereference in mt7925_sta_set_decap_offload() Add a NULL check for msta->vif before accessing its members to prevent a kernel panic in AP mode deployment. This also fix the issue reported in [1]. The crash occurs when this function is triggered before the station is fully initialized. The call trace shows a page fault at mt7925_sta_set_decap_offload() due to accessing resources when msta->vif is NULL. Fix this by adding an early return if msta->vif is NULL and also check wcid.sta is ready. This ensures we only proceed with decap offload configuration when the station's state is properly initialized. [14739.655703] Unable to handle kernel paging request at virtual address ffffffffffffffa0 [14739.811820] CPU: 0 UID: 0 PID: 895854 Comm: hostapd Tainted: G [14739.821394] Tainted: [C]=CRAP, [O]=OOT_MODULE [14739.825746] Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT) [14739.831577] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [14739.838538] pc : mt7925_sta_set_decap_offload+0xc0/0x1b8 [mt7925_common] [14739.845271] lr : mt7925_sta_set_decap_offload+0x58/0x1b8 [mt7925_common] [14739.851985] sp : ffffffc085efb500 [14739.855295] x29: ffffffc085efb500 x28: 0000000000000000 x27: ffffff807803a158 [14739.862436] x26: ffffff8041ececb8 x25: 0000000000000001 x24: 0000000000000001 [14739.869577] x23: 0000000000000001 x22: 0000000000000008 x21: ffffff8041ecea88 [14739.876715] x20: ffffff8041c19ca0 x19: ffffff8078031fe0 x18: 0000000000000000 [14739.883853] x17: 0000000000000000 x16: ffffffe2aeac1110 x15: 000000559da48080 [14739.890991] x14: 0000000000000001 x13: 0000000000000000 x12: 0000000000000000 [14739.898130] x11: 0a10020001008e88 x10: 0000000000001a50 x9 : ffffffe26457bfa0 [14739.905269] x8 : ffffff8042013bb0 x7 : ffffff807fb6cbf8 x6 : dead000000000100 [14739.912407] x5 : dead000000000122 x4 : ffffff80780326c8 x3 : 0000000000000000 [14739.919546] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffff8041ececb8 [14739.926686] Call trace: [14739.929130] mt7925_sta_set_decap_offload+0xc0/0x1b8 [mt7925_common] [14739.935505] ieee80211_check_fast_rx+0x19c/0x510 [mac80211] [14739.941344] _sta_info_move_state+0xe4/0x510 [mac80211] [14739.946860] sta_info_move_state+0x1c/0x30 [mac80211] [14739.952116] sta_apply_auth_flags.constprop.0+0x90/0x1b0 [mac80211] [14739.958708] sta_apply_parameters+0x234/0x5e0 [mac80211] [14739.964332] ieee80211_add_station+0xdc/0x190 [mac80211] [14739.969950] nl80211_new_station+0x46c/0x670 [cfg80211] [14739.975516] genl_family_rcv_msg_doit+0xdc/0x150 [14739.980158] genl_rcv_msg+0x218/0x298 [14739.983830] netlink_rcv_skb+0x64/0x138 [14739.987670] genl_rcv+0x40/0x60 [14739.990816] netlink_unicast+0x314/0x380 [14739.994742] netlink_sendmsg+0x198/0x3f0 [14739.998664] __sock_sendmsg+0x64/0xc0 [14740.002324] ____sys_sendmsg+0x260/0x298 [14740.006242] ___sys_sendmsg+0xb4/0x110

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: Purge vif txq in ieee80211_do_stop() After ieee80211_do_stop() SKB from vif's txq could still be processed. Indeed another concurrent vif schedule_and_wake_txq call could cause those packets to be dequeued (see ieee80211_handle_wake_tx_queue()) without checking the sdata current state. Because vif.drv_priv is now cleared in this function, this could lead to driver crash. For example in ath12k, ahvif is store in vif.drv_priv. Thus if ath12k_mac_op_tx() is called after ieee80211_do_stop(), ahvif->ah can be NULL, leading the ath12k_warn(ahvif->ah,...) call in this function to trigger the NULL deref below. Unable to handle kernel paging request at virtual address dfffffc000000001 KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] batman_adv: bat0: Interface deactivated: brbh1337 Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [dfffffc000000001] address between user and kernel address ranges Internal error: Oops: 0000000096000004 [#1] SMP CPU: 1 UID: 0 PID: 978 Comm: lbd Not tainted 6.13.0-g633f875b8f1e #114 Hardware name: HW (DT) pstate: 10000005 (nzcV daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : ath12k_mac_op_tx+0x6cc/0x29b8 [ath12k] lr : ath12k_mac_op_tx+0x174/0x29b8 [ath12k] sp : ffffffc086ace450 x29: ffffffc086ace450 x28: 0000000000000000 x27: 1ffffff810d59ca4 x26: ffffff801d05f7c0 x25: 0000000000000000 x24: 000000004000001e x23: ffffff8009ce4926 x22: ffffff801f9c0800 x21: ffffff801d05f7f0 x20: ffffff8034a19f40 x19: 0000000000000000 x18: ffffff801f9c0958 x17: ffffff800bc0a504 x16: dfffffc000000000 x15: ffffffc086ace4f8 x14: ffffff801d05f83c x13: 0000000000000000 x12: ffffffb003a0bf03 x11: 0000000000000000 x10: ffffffb003a0bf02 x9 : ffffff8034a19f40 x8 : ffffff801d05f818 x7 : 1ffffff0069433dc x6 : ffffff8034a19ee0 x5 : ffffff801d05f7f0 x4 : 0000000000000000 x3 : 0000000000000001 x2 : 0000000000000000 x1 : dfffffc000000000 x0 : 0000000000000008 Call trace: ath12k_mac_op_tx+0x6cc/0x29b8 [ath12k] (P) ieee80211_handle_wake_tx_queue+0x16c/0x260 ieee80211_queue_skb+0xeec/0x1d20 ieee80211_tx+0x200/0x2c8 ieee80211_xmit+0x22c/0x338 __ieee80211_subif_start_xmit+0x7e8/0xc60 ieee80211_subif_start_xmit+0xc4/0xee0 __ieee80211_subif_start_xmit_8023.isra.0+0x854/0x17a0 ieee80211_subif_start_xmit_8023+0x124/0x488 dev_hard_start_xmit+0x160/0x5a8 __dev_queue_xmit+0x6f8/0x3120 br_dev_queue_push_xmit+0x120/0x4a8 __br_forward+0xe4/0x2b0 deliver_clone+0x5c/0xd0 br_flood+0x398/0x580 br_dev_xmit+0x454/0x9f8 dev_hard_start_xmit+0x160/0x5a8 __dev_queue_xmit+0x6f8/0x3120 ip6_finish_output2+0xc28/0x1b60 __ip6_finish_output+0x38c/0x638 ip6_output+0x1b4/0x338 ip6_local_out+0x7c/0xa8 ip6_send_skb+0x7c/0x1b0 ip6_push_pending_frames+0x94/0xd0 rawv6_sendmsg+0x1a98/0x2898 inet_sendmsg+0x94/0xe0 __sys_sendto+0x1e4/0x308 __arm64_sys_sendto+0xc4/0x140 do_el0_svc+0x110/0x280 el0_svc+0x20/0x60 el0t_64_sync_handler+0x104/0x138 el0t_64_sync+0x154/0x158 To avoid that, empty vif's txq at ieee80211_do_stop() so no packet could be dequeued after ieee80211_do_stop() (new packets cannot be queued because SDATA_STATE_RUNNING is cleared at this point).

In the Linux kernel, the following vulnerability has been resolved: s390/pci: Fix missing check for zpci_create_device() error return The zpci_create_device() function returns an error pointer that needs to be checked before dereferencing it as a struct zpci_dev pointer. Add the missing check in __clp_add() where it was missed when adding the scan_list in the fixed commit. Simply not adding the device to the scan list results in the previous behavior.

In the Linux kernel, the following vulnerability has been resolved: ata: pata_pxa: Fix potential NULL pointer dereference in pxa_ata_probe() devm_ioremap() returns NULL on error. Currently, pxa_ata_probe() does not check for this case, which can result in a NULL pointer dereference. Add NULL check after devm_ioremap() to prevent this issue.

In the Linux kernel, the following vulnerability has been resolved: pds_core: make wait_context part of q_info Make the wait_context a full part of the q_info struct rather than a stack variable that goes away after pdsc_adminq_post() is done so that the context is still available after the wait loop has given up. There was a case where a slow development firmware caused the adminq request to time out, but then later the FW finally finished the request and sent the interrupt. The handler tried to complete_all() the completion context that had been created on the stack in pdsc_adminq_post() but no longer existed. This caused bad pointer usage, kernel crashes, and much wailing and gnashing of teeth.

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: Fix null-ptr-deref in mt7996_mmio_wed_init() devm_ioremap() returns NULL on error. Currently, mt7996_mmio_wed_init() does not check for this case, which results in a NULL pointer dereference. Prevent null pointer dereference in mt7996_mmio_wed_init()

In the Linux kernel, the following vulnerability has been resolved: drm/msm/dpu: Fix error pointers in dpu_plane_virtual_atomic_check The function dpu_plane_virtual_atomic_check was dereferencing pointers returned by drm_atomic_get_plane_state without checking for errors. This could lead to undefined behavior if the function returns an error pointer. This commit adds checks using IS_ERR to ensure that plane_state is valid before dereferencing them. Similar to commit da29abe71e16 ("drm/amd/display: Fix error pointers in amdgpu_dm_crtc_mem_type_changed"). Patchwork: https://patchwork.freedesktop.org/patch/643132/

In the Linux kernel, the following vulnerability has been resolved: fpga: fix potential null pointer deref in fpga_mgr_test_img_load_sgt() fpga_mgr_test_img_load_sgt() allocates memory for sgt using kunit_kzalloc() however it does not check if the allocation failed. It then passes sgt to sg_alloc_table(), which passes it to __sg_alloc_table(). This function calls memset() on sgt in an attempt to zero it out. If the allocation fails then sgt will be NULL and the memset will trigger a NULL pointer dereference. Fix this by checking the allocation with KUNIT_ASSERT_NOT_ERR_OR_NULL().

In the Linux kernel, the following vulnerability has been resolved: HID: pidff: Fix null pointer dereference in pidff_find_fields This function triggered a null pointer dereference if used to search for a report that isn't implemented on the device. This happened both for optional and required reports alike. The same logic was applied to pidff_find_special_field and although pidff_init_fields should return an error earlier if one of the required reports is missing, future modifications could change this logic and resurface this possible null pointer dereference again. LKML bug report: https://lore.kernel.org/all/CAL-gK7f5=R0nrrQdPtaZZr1fd-cdAMbDMuZ_NLA8vM0SX+nGSw@mail.gmail.com

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: Add NULL check in mt7996_thermal_init devm_kasprintf() can return a NULL pointer on failure,but this returned value in mt7996_thermal_init() is not checked. Add NULL check in mt7996_thermal_init(), to handle kernel NULL pointer dereference error.

In the Linux kernel, the following vulnerability has been resolved: LoongArch: Return NULL from huge_pte_offset() for invalid PMD LoongArch's huge_pte_offset() currently returns a pointer to a PMD slot even if the underlying entry points to invalid_pte_table (indicating no mapping). Callers like smaps_hugetlb_range() fetch this invalid entry value (the address of invalid_pte_table) via this pointer. The generic is_swap_pte() check then incorrectly identifies this address as a swap entry on LoongArch, because it satisfies the "!pte_present() && !pte_none()" conditions. This misinterpretation, combined with a coincidental match by is_migration_entry() on the address bits, leads to kernel crashes in pfn_swap_entry_to_page(). Fix this at the architecture level by modifying huge_pte_offset() to check the PMD entry's content using pmd_none() before returning. If the entry is invalid (i.e., it points to invalid_pte_table), return NULL instead of the pointer to the slot.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add null pointer check for get_first_active_display() The function mod_hdcp_hdcp1_enable_encryption() calls the function get_first_active_display(), but does not check its return value. The return value is a null pointer if the display list is empty. This will lead to a null pointer dereference in mod_hdcp_hdcp2_enable_encryption(). Add a null pointer check for get_first_active_display() and return MOD_HDCP_STATUS_DISPLAY_NOT_FOUND if the function return null.

In the Linux kernel, the following vulnerability has been resolved: ASoC: amd: acp: Fix NULL pointer deref in acp_i2s_set_tdm_slot Update chip data using dev_get_drvdata(dev->parent) to fix NULL pointer deref in acp_i2s_set_tdm_slot.

In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel: Fix segfault with PEBS-via-PT with sample_freq Currently, using PEBS-via-PT with a sample frequency instead of a sample period, causes a segfault. For example: BUG: kernel NULL pointer dereference, address: 0000000000000195 <NMI> ? __die_body.cold+0x19/0x27 ? page_fault_oops+0xca/0x290 ? exc_page_fault+0x7e/0x1b0 ? asm_exc_page_fault+0x26/0x30 ? intel_pmu_pebs_event_update_no_drain+0x40/0x60 ? intel_pmu_pebs_event_update_no_drain+0x32/0x60 intel_pmu_drain_pebs_icl+0x333/0x350 handle_pmi_common+0x272/0x3c0 intel_pmu_handle_irq+0x10a/0x2e0 perf_event_nmi_handler+0x2a/0x50 That happens because intel_pmu_pebs_event_update_no_drain() assumes all the pebs_enabled bits represent counter indexes, which is not always the case. In this particular case, bits 60 and 61 are set for PEBS-via-PT purposes. The behaviour of PEBS-via-PT with sample frequency is questionable because although a PMI is generated (PEBS_PMI_AFTER_EACH_RECORD), the period is not adjusted anyway. Putting that aside, fix intel_pmu_pebs_event_update_no_drain() by passing the mask of counter bits instead of 'size'. Note, prior to the Fixes commit, 'size' would be limited to the maximum counter index, so the issue was not hit.

In the Linux kernel, the following vulnerability has been resolved: tty: serial: uartlite: register uart driver in init When two instances of uart devices are probing, a concurrency race can occur. If one thread calls uart_register_driver function, which first allocates and assigns memory to 'uart_state' member of uart_driver structure, the other instance can bypass uart driver registration and call ulite_assign. This calls uart_add_one_port, which expects the uart driver to be fully initialized. This leads to a kernel panic due to a null pointer dereference: [ 8.143581] BUG: kernel NULL pointer dereference, address: 00000000000002b8 [ 8.156982] #PF: supervisor write access in kernel mode [ 8.156984] #PF: error_code(0x0002) - not-present page [ 8.156986] PGD 0 P4D 0 ... [ 8.180668] RIP: 0010:mutex_lock+0x19/0x30 [ 8.188624] Call Trace: [ 8.188629] ? __die_body.cold+0x1a/0x1f [ 8.195260] ? page_fault_oops+0x15c/0x290 [ 8.209183] ? __irq_resolve_mapping+0x47/0x80 [ 8.209187] ? exc_page_fault+0x64/0x140 [ 8.209190] ? asm_exc_page_fault+0x22/0x30 [ 8.209196] ? mutex_lock+0x19/0x30 [ 8.223116] uart_add_one_port+0x60/0x440 [ 8.223122] ? proc_tty_register_driver+0x43/0x50 [ 8.223126] ? tty_register_driver+0x1ca/0x1e0 [ 8.246250] ulite_probe+0x357/0x4b0 [uartlite] To prevent it, move uart driver registration in to init function. This will ensure that uart_driver is always registered when probe function is called.

In the Linux kernel, the following vulnerability has been resolved: atm: clip: Fix NULL pointer dereference in vcc_sendmsg() atmarpd_dev_ops does not implement the send method, which may cause crash as bellow. BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 0 P4D 0 Oops: Oops: 0010 [#1] SMP KASAN NOPTI CPU: 0 UID: 0 PID: 5324 Comm: syz.0.0 Not tainted 6.15.0-rc6-syzkaller-00346-g5723cc3450bc #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:0x0 Code: Unable to access opcode bytes at 0xffffffffffffffd6. RSP: 0018:ffffc9000d3cf778 EFLAGS: 00010246 RAX: 1ffffffff1910dd1 RBX: 00000000000000c0 RCX: dffffc0000000000 RDX: ffffc9000dc82000 RSI: ffff88803e4c4640 RDI: ffff888052cd0000 RBP: ffffc9000d3cf8d0 R08: ffff888052c9143f R09: 1ffff1100a592287 R10: dffffc0000000000 R11: 0000000000000000 R12: 1ffff92001a79f00 R13: ffff888052cd0000 R14: ffff88803e4c4640 R15: ffffffff8c886e88 FS: 00007fbc762566c0(0000) GS:ffff88808d6c2000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 0000000041f1b000 CR4: 0000000000352ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> vcc_sendmsg+0xa10/0xc50 net/atm/common.c:644 sock_sendmsg_nosec net/socket.c:712 [inline] __sock_sendmsg+0x219/0x270 net/socket.c:727 ____sys_sendmsg+0x52d/0x830 net/socket.c:2566 ___sys_sendmsg+0x21f/0x2a0 net/socket.c:2620 __sys_sendmmsg+0x227/0x430 net/socket.c:2709 __do_sys_sendmmsg net/socket.c:2736 [inline] __se_sys_sendmmsg net/socket.c:2733 [inline] __x64_sys_sendmmsg+0xa0/0xc0 net/socket.c:2733 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xf6/0x210 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f

In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: fix dereferencing invalid pmd migration entry When migrating a THP, concurrent access to the PMD migration entry during a deferred split scan can lead to an invalid address access, as illustrated below. To prevent this invalid access, it is necessary to check the PMD migration entry and return early. In this context, there is no need to use pmd_to_swp_entry and pfn_swap_entry_to_page to verify the equality of the target folio. Since the PMD migration entry is locked, it cannot be served as the target. Mailing list discussion and explanation from Hugh Dickins: "An anon_vma lookup points to a location which may contain the folio of interest, but might instead contain another folio: and weeding out those other folios is precisely what the "folio != pmd_folio((*pmd)" check (and the "risk of replacing the wrong folio" comment a few lines above it) is for." BUG: unable to handle page fault for address: ffffea60001db008 CPU: 0 UID: 0 PID: 2199114 Comm: tee Not tainted 6.14.0+ #4 NONE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:split_huge_pmd_locked+0x3b5/0x2b60 Call Trace: <TASK> try_to_migrate_one+0x28c/0x3730 rmap_walk_anon+0x4f6/0x770 unmap_folio+0x196/0x1f0 split_huge_page_to_list_to_order+0x9f6/0x1560 deferred_split_scan+0xac5/0x12a0 shrinker_debugfs_scan_write+0x376/0x470 full_proxy_write+0x15c/0x220 vfs_write+0x2fc/0xcb0 ksys_write+0x146/0x250 do_syscall_64+0x6a/0x120 entry_SYSCALL_64_after_hwframe+0x76/0x7e The bug is found by syzkaller on an internal kernel, then confirmed on upstream.

In the Linux kernel, the following vulnerability has been resolved: arm64: errata: Add missing sentinels to Spectre-BHB MIDR arrays Commit a5951389e58d ("arm64: errata: Add newer ARM cores to the spectre_bhb_loop_affected() lists") added some additional CPUs to the Spectre-BHB workaround, including some new arrays for designs that require new 'k' values for the workaround to be effective. Unfortunately, the new arrays omitted the sentinel entry and so is_midr_in_range_list() will walk off the end when it doesn't find a match. With UBSAN enabled, this leads to a crash during boot when is_midr_in_range_list() is inlined (which was more common prior to c8c2647e69be ("arm64: Make  _midr_in_range_list() an exported function")): | Internal error: aarch64 BRK: 00000000f2000001 [#1] PREEMPT SMP | pstate: 804000c5 (Nzcv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) | pc : spectre_bhb_loop_affected+0x28/0x30 | lr : is_spectre_bhb_affected+0x170/0x190 | [...] | Call trace: | spectre_bhb_loop_affected+0x28/0x30 | update_cpu_capabilities+0xc0/0x184 | init_cpu_features+0x188/0x1a4 | cpuinfo_store_boot_cpu+0x4c/0x60 | smp_prepare_boot_cpu+0x38/0x54 | start_kernel+0x8c/0x478 | __primary_switched+0xc8/0xd4 | Code: 6b09011f 54000061 52801080 d65f03c0 (d4200020) | ---[ end trace 0000000000000000 ]--- | Kernel panic - not syncing: aarch64 BRK: Fatal exception Add the missing sentinel entries.

In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Initialize obj_event->obj_sub_list before xa_insert The obj_event may be loaded immediately after inserted, then if the list_head is not initialized then we may get a poisonous pointer. This fixes the crash below: mlx5_core 0000:03:00.0: MLX5E: StrdRq(1) RqSz(8) StrdSz(2048) RxCqeCmprss(0 enhanced) mlx5_core.sf mlx5_core.sf.4: firmware version: 32.38.3056 mlx5_core 0000:03:00.0 en3f0pf0sf2002: renamed from eth0 mlx5_core.sf mlx5_core.sf.4: Rate limit: 127 rates are supported, range: 0Mbps to 195312Mbps IPv6: ADDRCONF(NETDEV_CHANGE): en3f0pf0sf2002: link becomes ready Unable to handle kernel NULL pointer dereference at virtual address 0000000000000060 Mem abort info: ESR = 0x96000006 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000006 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=00000007760fb000 [0000000000000060] pgd=000000076f6d7003, p4d=000000076f6d7003, pud=0000000777841003, pmd=0000000000000000 Internal error: Oops: 96000006 [#1] SMP Modules linked in: ipmb_host(OE) act_mirred(E) cls_flower(E) sch_ingress(E) mptcp_diag(E) udp_diag(E) raw_diag(E) unix_diag(E) tcp_diag(E) inet_diag(E) binfmt_misc(E) bonding(OE) rdma_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) isofs(E) cdrom(E) mst_pciconf(OE) ib_umad(OE) mlx5_ib(OE) ipmb_dev_int(OE) mlx5_core(OE) kpatch_15237886(OEK) mlxdevm(OE) auxiliary(OE) ib_uverbs(OE) ib_core(OE) psample(E) mlxfw(OE) tls(E) sunrpc(E) vfat(E) fat(E) crct10dif_ce(E) ghash_ce(E) sha1_ce(E) sbsa_gwdt(E) virtio_console(E) ext4(E) mbcache(E) jbd2(E) xfs(E) libcrc32c(E) mmc_block(E) virtio_net(E) net_failover(E) failover(E) sha2_ce(E) sha256_arm64(E) nvme(OE) nvme_core(OE) gpio_mlxbf3(OE) mlx_compat(OE) mlxbf_pmc(OE) i2c_mlxbf(OE) sdhci_of_dwcmshc(OE) pinctrl_mlxbf3(OE) mlxbf_pka(OE) gpio_generic(E) i2c_core(E) mmc_core(E) mlxbf_gige(OE) vitesse(E) pwr_mlxbf(OE) mlxbf_tmfifo(OE) micrel(E) mlxbf_bootctl(OE) virtio_ring(E) virtio(E) ipmi_devintf(E) ipmi_msghandler(E) [last unloaded: mst_pci] CPU: 11 PID: 20913 Comm: rte-worker-11 Kdump: loaded Tainted: G OE K 5.10.134-13.1.an8.aarch64 #1 Hardware name: https://www.mellanox.com BlueField-3 SmartNIC Main Card/BlueField-3 SmartNIC Main Card, BIOS 4.2.2.12968 Oct 26 2023 pstate: a0400089 (NzCv daIf +PAN -UAO -TCO BTYPE=--) pc : dispatch_event_fd+0x68/0x300 [mlx5_ib] lr : devx_event_notifier+0xcc/0x228 [mlx5_ib] sp : ffff80001005bcf0 x29: ffff80001005bcf0 x28: 0000000000000001 x27: ffff244e0740a1d8 x26: ffff244e0740a1d0 x25: ffffda56beff5ae0 x24: ffffda56bf911618 x23: ffff244e0596a480 x22: ffff244e0596a480 x21: ffff244d8312ad90 x20: ffff244e0596a480 x19: fffffffffffffff0 x18: 0000000000000000 x17: 0000000000000000 x16: ffffda56be66d620 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000040 x10: ffffda56bfcafb50 x9 : ffffda5655c25f2c x8 : 0000000000000010 x7 : 0000000000000000 x6 : ffff24545a2e24b8 x5 : 0000000000000003 x4 : ffff80001005bd28 x3 : 0000000000000000 x2 : 0000000000000000 x1 : ffff244e0596a480 x0 : ffff244d8312ad90 Call trace: dispatch_event_fd+0x68/0x300 [mlx5_ib] devx_event_notifier+0xcc/0x228 [mlx5_ib] atomic_notifier_call_chain+0x58/0x80 mlx5_eq_async_int+0x148/0x2b0 [mlx5_core] atomic_notifier_call_chain+0x58/0x80 irq_int_handler+0x20/0x30 [mlx5_core] __handle_irq_event_percpu+0x60/0x220 handle_irq_event_percpu+0x3c/0x90 handle_irq_event+0x58/0x158 handle_fasteoi_irq+0xfc/0x188 generic_handle_irq+0x34/0x48 ...

In the Linux kernel, the following vulnerability has been resolved: RDMA/cma: Fix workqueue crash in cma_netevent_work_handler struct rdma_cm_id has member "struct work_struct net_work" that is reused for enqueuing cma_netevent_work_handler()s onto cma_wq. Below crash[1] can occur if more than one call to cma_netevent_callback() occurs in quick succession, which further enqueues cma_netevent_work_handler()s for the same rdma_cm_id, overwriting any previously queued work-item(s) that was just scheduled to run i.e. there is no guarantee the queued work item may run between two successive calls to cma_netevent_callback() and the 2nd INIT_WORK would overwrite the 1st work item (for the same rdma_cm_id), despite grabbing id_table_lock during enqueue. Also drgn analysis [2] indicates the work item was likely overwritten. Fix this by moving the INIT_WORK() to __rdma_create_id(), so that it doesn't race with any existing queue_work() or its worker thread. [1] Trimmed crash stack: ============================================= BUG: kernel NULL pointer dereference, address: 0000000000000008 kworker/u256:6 ... 6.12.0-0... Workqueue: cma_netevent_work_handler [rdma_cm] (rdma_cm) RIP: 0010:process_one_work+0xba/0x31a Call Trace: worker_thread+0x266/0x3a0 kthread+0xcf/0x100 ret_from_fork+0x31/0x50 ret_from_fork_asm+0x1a/0x30 ============================================= [2] drgn crash analysis: >>> trace = prog.crashed_thread().stack_trace() >>> trace (0) crash_setup_regs (./arch/x86/include/asm/kexec.h:111:15) (1) __crash_kexec (kernel/crash_core.c:122:4) (2) panic (kernel/panic.c:399:3) (3) oops_end (arch/x86/kernel/dumpstack.c:382:3) ... (8) process_one_work (kernel/workqueue.c:3168:2) (9) process_scheduled_works (kernel/workqueue.c:3310:3) (10) worker_thread (kernel/workqueue.c:3391:4) (11) kthread (kernel/kthread.c:389:9) Line workqueue.c:3168 for this kernel version is in process_one_work(): 3168 strscpy(worker->desc, pwq->wq->name, WORKER_DESC_LEN); >>> trace[8]["work"] *(struct work_struct *)0xffff92577d0a21d8 = { .data = (atomic_long_t){ .counter = (s64)536870912, <=== Note }, .entry = (struct list_head){ .next = (struct list_head *)0xffff924d075924c0, .prev = (struct list_head *)0xffff924d075924c0, }, .func = (work_func_t)cma_netevent_work_handler+0x0 = 0xffffffffc2cec280, } Suspicion is that pwq is NULL: >>> trace[8]["pwq"] (struct pool_workqueue *)<absent> In process_one_work(), pwq is assigned from: struct pool_workqueue *pwq = get_work_pwq(work); and get_work_pwq() is: static struct pool_workqueue *get_work_pwq(struct work_struct *work) { unsigned long data = atomic_long_read(&work->data); if (data & WORK_STRUCT_PWQ) return work_struct_pwq(data); else return NULL; } WORK_STRUCT_PWQ is 0x4: >>> print(repr(prog['WORK_STRUCT_PWQ'])) Object(prog, 'enum work_flags', value=4) But work->data is 536870912 which is 0x20000000. So, get_work_pwq() returns NULL and we crash in process_one_work(): 3168 strscpy(worker->desc, pwq->wq->name, WORKER_DESC_LEN); =============================================

In the Linux kernel, the following vulnerability has been resolved: iommu/mediatek: Fix NULL pointer deference in mtk_iommu_device_group Currently, mtk_iommu calls during probe iommu_device_register before the hw_list from driver data is initialized. Since iommu probing issue fix, it leads to NULL pointer dereference in mtk_iommu_device_group when hw_list is accessed with list_first_entry (not null safe). So, change the call order to ensure iommu_device_register is called after the driver data are initialized.

In the Linux kernel, the following vulnerability has been resolved: fbdev: Fix do_register_framebuffer to prevent null-ptr-deref in fb_videomode_to_var If fb_add_videomode() in do_register_framebuffer() fails to allocate memory for fb_videomode, it will later lead to a null-ptr dereference in fb_videomode_to_var(), as the fb_info is registered while not having the mode in modelist that is expected to be there, i.e. the one that is described in fb_info->var. ================================================================ general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 1 PID: 30371 Comm: syz-executor.1 Not tainted 5.10.226-syzkaller #0 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 RIP: 0010:fb_videomode_to_var+0x24/0x610 drivers/video/fbdev/core/modedb.c:901 Call Trace: display_to_var+0x3a/0x7c0 drivers/video/fbdev/core/fbcon.c:929 fbcon_resize+0x3e2/0x8f0 drivers/video/fbdev/core/fbcon.c:2071 resize_screen drivers/tty/vt/vt.c:1176 [inline] vc_do_resize+0x53a/0x1170 drivers/tty/vt/vt.c:1263 fbcon_modechanged+0x3ac/0x6e0 drivers/video/fbdev/core/fbcon.c:2720 fbcon_update_vcs+0x43/0x60 drivers/video/fbdev/core/fbcon.c:2776 do_fb_ioctl+0x6d2/0x740 drivers/video/fbdev/core/fbmem.c:1128 fb_ioctl+0xe7/0x150 drivers/video/fbdev/core/fbmem.c:1203 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl fs/ioctl.c:739 [inline] __x64_sys_ioctl+0x19a/0x210 fs/ioctl.c:739 do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x67/0xd1 ================================================================ Even though fbcon_init() checks beforehand if fb_match_mode() in var_to_display() fails, it can not prevent the panic because fbcon_init() does not return error code. Considering this and the comment in the code about fb_match_mode() returning NULL - "This should not happen" - it is better to prevent registering the fb_info if its mode was not set successfully. Also move fb_add_videomode() closer to the beginning of do_register_framebuffer() to avoid having to do the cleanup on fail. Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix NULL access in assign channel context handler Currently, when ath12k_mac_assign_vif_to_vdev() fails, the radio handle (ar) gets accessed from the link VIF handle (arvif) for debug logging, This is incorrect. In the fail scenario, radio handle is NULL. Fix the NULL access, avoid radio handle access by moving to the hardware debug logging helper function (ath12k_hw_warn). Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

In the Linux kernel, the following vulnerability has been resolved: nvmet-tcp: don't restore null sk_state_change queue->state_change is set as part of nvmet_tcp_set_queue_sock(), but if the TCP connection isn't established when nvmet_tcp_set_queue_sock() is called then queue->state_change isn't set and sock->sk->sk_state_change isn't replaced. As such we don't need to restore sock->sk->sk_state_change if queue->state_change is NULL. This avoids NULL pointer dereferences such as this: [ 286.462026][ C0] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 286.462814][ C0] #PF: supervisor instruction fetch in kernel mode [ 286.463796][ C0] #PF: error_code(0x0010) - not-present page [ 286.464392][ C0] PGD 8000000140620067 P4D 8000000140620067 PUD 114201067 PMD 0 [ 286.465086][ C0] Oops: Oops: 0010 [#1] SMP KASAN PTI [ 286.465559][ C0] CPU: 0 UID: 0 PID: 1628 Comm: nvme Not tainted 6.15.0-rc2+ #11 PREEMPT(voluntary) [ 286.466393][ C0] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014 [ 286.467147][ C0] RIP: 0010:0x0 [ 286.467420][ C0] Code: Unable to access opcode bytes at 0xffffffffffffffd6. [ 286.467977][ C0] RSP: 0018:ffff8883ae008580 EFLAGS: 00010246 [ 286.468425][ C0] RAX: 0000000000000000 RBX: ffff88813fd34100 RCX: ffffffffa386cc43 [ 286.469019][ C0] RDX: 1ffff11027fa68b6 RSI: 0000000000000008 RDI: ffff88813fd34100 [ 286.469545][ C0] RBP: ffff88813fd34160 R08: 0000000000000000 R09: ffffed1027fa682c [ 286.470072][ C0] R10: ffff88813fd34167 R11: 0000000000000000 R12: ffff88813fd344c3 [ 286.470585][ C0] R13: ffff88813fd34112 R14: ffff88813fd34aec R15: ffff888132cdd268 [ 286.471070][ C0] FS: 00007fe3c04c7d80(0000) GS:ffff88840743f000(0000) knlGS:0000000000000000 [ 286.471644][ C0] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 286.472543][ C0] CR2: ffffffffffffffd6 CR3: 000000012daca000 CR4: 00000000000006f0 [ 286.473500][ C0] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 286.474467][ C0] DR3: 0000000000000000 DR6: 00000000ffff07f0 DR7: 0000000000000400 [ 286.475453][ C0] Call Trace: [ 286.476102][ C0] <IRQ> [ 286.476719][ C0] tcp_fin+0x2bb/0x440 [ 286.477429][ C0] tcp_data_queue+0x190f/0x4e60 [ 286.478174][ C0] ? __build_skb_around+0x234/0x330 [ 286.478940][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.479659][ C0] ? __pfx_tcp_data_queue+0x10/0x10 [ 286.480431][ C0] ? tcp_try_undo_loss+0x640/0x6c0 [ 286.481196][ C0] ? seqcount_lockdep_reader_access.constprop.0+0x82/0x90 [ 286.482046][ C0] ? kvm_clock_get_cycles+0x14/0x30 [ 286.482769][ C0] ? ktime_get+0x66/0x150 [ 286.483433][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.484146][ C0] tcp_rcv_established+0x6e4/0x2050 [ 286.484857][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.485523][ C0] ? ipv4_dst_check+0x160/0x2b0 [ 286.486203][ C0] ? __pfx_tcp_rcv_established+0x10/0x10 [ 286.486917][ C0] ? lock_release+0x217/0x2c0 [ 286.487595][ C0] tcp_v4_do_rcv+0x4d6/0x9b0 [ 286.488279][ C0] tcp_v4_rcv+0x2af8/0x3e30 [ 286.488904][ C0] ? raw_local_deliver+0x51b/0xad0 [ 286.489551][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.490198][ C0] ? __pfx_tcp_v4_rcv+0x10/0x10 [ 286.490813][ C0] ? __pfx_raw_local_deliver+0x10/0x10 [ 286.491487][ C0] ? __pfx_nf_confirm+0x10/0x10 [nf_conntrack] [ 286.492275][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.492900][ C0] ip_protocol_deliver_rcu+0x8f/0x370 [ 286.493579][ C0] ip_local_deliver_finish+0x297/0x420 [ 286.494268][ C0] ip_local_deliver+0x168/0x430 [ 286.494867][ C0] ? __pfx_ip_local_deliver+0x10/0x10 [ 286.495498][ C0] ? __pfx_ip_local_deliver_finish+0x10/0x10 [ 286.496204][ C0] ? ip_rcv_finish_core+0x19a/0x1f20 [ 286.496806][ C0] ? lock_release+0x217/0x2c0 [ 286.497414][ C0] ip_rcv+0x455/0x6e0 [ 286.497945][ C0] ? __pfx_ip_rcv+0x10/0x10 [ ---truncated---

In the Linux kernel, the following vulnerability has been resolved: xenbus: Use kref to track req lifetime Marek reported seeing a NULL pointer fault in the xenbus_thread callstack: BUG: kernel NULL pointer dereference, address: 0000000000000000 RIP: e030:__wake_up_common+0x4c/0x180 Call Trace: <TASK> __wake_up_common_lock+0x82/0xd0 process_msg+0x18e/0x2f0 xenbus_thread+0x165/0x1c0 process_msg+0x18e is req->cb(req). req->cb is set to xs_wake_up(), a thin wrapper around wake_up(), or xenbus_dev_queue_reply(). It seems like it was xs_wake_up() in this case. It seems like req may have woken up the xs_wait_for_reply(), which kfree()ed the req. When xenbus_thread resumes, it faults on the zero-ed data. Linux Device Drivers 2nd edition states: "Normally, a wake_up call can cause an immediate reschedule to happen, meaning that other processes might run before wake_up returns." ... which would match the behaviour observed. Change to keeping two krefs on each request. One for the caller, and one for xenbus_thread. Each will kref_put() when finished, and the last will free it. This use of kref matches the description in Documentation/core-api/kref.rst

In the Linux kernel, the following vulnerability has been resolved: serial: jsm: fix NPE during jsm_uart_port_init No device was set which caused serial_base_ctrl_add to crash. BUG: kernel NULL pointer dereference, address: 0000000000000050 Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 16 UID: 0 PID: 368 Comm: (udev-worker) Not tainted 6.12.25-amd64 #1 Debian 6.12.25-1 RIP: 0010:serial_base_ctrl_add+0x96/0x120 Call Trace: <TASK> serial_core_register_port+0x1a0/0x580 ? __setup_irq+0x39c/0x660 ? __kmalloc_cache_noprof+0x111/0x310 jsm_uart_port_init+0xe8/0x180 [jsm] jsm_probe_one+0x1f4/0x410 [jsm] local_pci_probe+0x42/0x90 pci_device_probe+0x22f/0x270 really_probe+0xdb/0x340 ? pm_runtime_barrier+0x54/0x90 ? __pfx___driver_attach+0x10/0x10 __driver_probe_device+0x78/0x110 driver_probe_device+0x1f/0xa0 __driver_attach+0xba/0x1c0 bus_for_each_dev+0x8c/0xe0 bus_add_driver+0x112/0x1f0 driver_register+0x72/0xd0 jsm_init_module+0x36/0xff0 [jsm] ? __pfx_jsm_init_module+0x10/0x10 [jsm] do_one_initcall+0x58/0x310 do_init_module+0x60/0x230 Tested with Digi Neo PCIe 8 port card.

In the Linux kernel, the following vulnerability has been resolved: i2c: cros-ec-tunnel: defer probe if parent EC is not present When i2c-cros-ec-tunnel and the EC driver are built-in, the EC parent device will not be found, leading to NULL pointer dereference. That can also be reproduced by unbinding the controller driver and then loading i2c-cros-ec-tunnel module (or binding the device). [ 271.991245] BUG: kernel NULL pointer dereference, address: 0000000000000058 [ 271.998215] #PF: supervisor read access in kernel mode [ 272.003351] #PF: error_code(0x0000) - not-present page [ 272.008485] PGD 0 P4D 0 [ 272.011022] Oops: Oops: 0000 [#1] SMP NOPTI [ 272.015207] CPU: 0 UID: 0 PID: 3859 Comm: insmod Tainted: G S 6.15.0-rc1-00004-g44722359ed83 #30 PREEMPT(full) 3c7fb39a552e7d949de2ad921a7d6588d3a4fdc5 [ 272.030312] Tainted: [S]=CPU_OUT_OF_SPEC [ 272.034233] Hardware name: HP Berknip/Berknip, BIOS Google_Berknip.13434.356.0 05/17/2021 [ 272.042400] RIP: 0010:ec_i2c_probe+0x2b/0x1c0 [i2c_cros_ec_tunnel] [ 272.048577] Code: 1f 44 00 00 41 57 41 56 41 55 41 54 53 48 83 ec 10 65 48 8b 05 06 a0 6c e7 48 89 44 24 08 4c 8d 7f 10 48 8b 47 50 4c 8b 60 78 <49> 83 7c 24 58 00 0f 84 2f 01 00 00 48 89 fb be 30 06 00 00 4c 9 [ 272.067317] RSP: 0018:ffffa32082a03940 EFLAGS: 00010282 [ 272.072541] RAX: ffff969580b6a810 RBX: ffff969580b68c10 RCX: 0000000000000000 [ 272.079672] RDX: 0000000000000000 RSI: 0000000000000282 RDI: ffff969580b68c00 [ 272.086804] RBP: 00000000fffffdfb R08: 0000000000000000 R09: 0000000000000000 [ 272.093936] R10: 0000000000000000 R11: ffffffffc0600000 R12: 0000000000000000 [ 272.101067] R13: ffffffffa666fbb8 R14: ffffffffc05b5528 R15: ffff969580b68c10 [ 272.108198] FS: 00007b930906fc40(0000) GS:ffff969603149000(0000) knlGS:0000000000000000 [ 272.116282] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 272.122024] CR2: 0000000000000058 CR3: 000000012631c000 CR4: 00000000003506f0 [ 272.129155] Call Trace: [ 272.131606] <TASK> [ 272.133709] ? acpi_dev_pm_attach+0xdd/0x110 [ 272.137985] platform_probe+0x69/0xa0 [ 272.141652] really_probe+0x152/0x310 [ 272.145318] __driver_probe_device+0x77/0x110 [ 272.149678] driver_probe_device+0x1e/0x190 [ 272.153864] __driver_attach+0x10b/0x1e0 [ 272.157790] ? driver_attach+0x20/0x20 [ 272.161542] bus_for_each_dev+0x107/0x150 [ 272.165553] bus_add_driver+0x15d/0x270 [ 272.169392] driver_register+0x65/0x110 [ 272.173232] ? cleanup_module+0xa80/0xa80 [i2c_cros_ec_tunnel 3a00532f3f4af4a9eade753f86b0f8dd4e4e5698] [ 272.182617] do_one_initcall+0x110/0x350 [ 272.186543] ? security_kernfs_init_security+0x49/0xd0 [ 272.191682] ? __kernfs_new_node+0x1b9/0x240 [ 272.195954] ? security_kernfs_init_security+0x49/0xd0 [ 272.201093] ? __kernfs_new_node+0x1b9/0x240 [ 272.205365] ? kernfs_link_sibling+0x105/0x130 [ 272.209810] ? kernfs_next_descendant_post+0x1c/0xa0 [ 272.214773] ? kernfs_activate+0x57/0x70 [ 272.218699] ? kernfs_add_one+0x118/0x160 [ 272.222710] ? __kernfs_create_file+0x71/0xa0 [ 272.227069] ? sysfs_add_bin_file_mode_ns+0xd6/0x110 [ 272.232033] ? internal_create_group+0x453/0x4a0 [ 272.236651] ? __vunmap_range_noflush+0x214/0x2d0 [ 272.241355] ? __free_frozen_pages+0x1dc/0x420 [ 272.245799] ? free_vmap_area_noflush+0x10a/0x1c0 [ 272.250505] ? load_module+0x1509/0x16f0 [ 272.254431] do_init_module+0x60/0x230 [ 272.258181] __se_sys_finit_module+0x27a/0x370 [ 272.262627] do_syscall_64+0x6a/0xf0 [ 272.266206] ? do_syscall_64+0x76/0xf0 [ 272.269956] ? irqentry_exit_to_user_mode+0x79/0x90 [ 272.274836] entry_SYSCALL_64_after_hwframe+0x55/0x5d [ 272.279887] RIP: 0033:0x7b9309168d39 [ 272.283466] Code: 5b 41 5c 5d c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d af 40 0c 00 f7 d8 64 89 01 8 [ 272.302210] RSP: 002b:00007fff50f1a288 EFLAGS: 00000246 ORIG_RAX: 000 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: nfs: handle failure of nfs_get_lock_context in unlock path When memory is insufficient, the allocation of nfs_lock_context in nfs_get_lock_context() fails and returns -ENOMEM. If we mistakenly treat an nfs4_unlockdata structure (whose l_ctx member has been set to -ENOMEM) as valid and proceed to execute rpc_run_task(), this will trigger a NULL pointer dereference in nfs4_locku_prepare. For example: BUG: kernel NULL pointer dereference, address: 000000000000000c PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP PTI CPU: 15 UID: 0 PID: 12 Comm: kworker/u64:0 Not tainted 6.15.0-rc2-dirty #60 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 Workqueue: rpciod rpc_async_schedule RIP: 0010:nfs4_locku_prepare+0x35/0xc2 Code: 89 f2 48 89 fd 48 c7 c7 68 69 ef b5 53 48 8b 8e 90 00 00 00 48 89 f3 RSP: 0018:ffffbbafc006bdb8 EFLAGS: 00010246 RAX: 000000000000004b RBX: ffff9b964fc1fa00 RCX: 0000000000000000 RDX: 0000000000000000 RSI: fffffffffffffff4 RDI: ffff9ba53fddbf40 RBP: ffff9ba539934000 R08: 0000000000000000 R09: ffffbbafc006bc38 R10: ffffffffb6b689c8 R11: 0000000000000003 R12: ffff9ba539934030 R13: 0000000000000001 R14: 0000000004248060 R15: ffffffffb56d1c30 FS: 0000000000000000(0000) GS:ffff9ba5881f0000(0000) knlGS:00000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000000c CR3: 000000093f244000 CR4: 00000000000006f0 Call Trace: <TASK> __rpc_execute+0xbc/0x480 rpc_async_schedule+0x2f/0x40 process_one_work+0x232/0x5d0 worker_thread+0x1da/0x3d0 ? __pfx_worker_thread+0x10/0x10 kthread+0x10d/0x240 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x34/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Modules linked in: CR2: 000000000000000c ---[ end trace 0000000000000000 ]--- Free the allocated nfs4_unlockdata when nfs_get_lock_context() fails and return NULL to terminate subsequent rpc_run_task, preventing NULL pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: netfs: Only create /proc/fs/netfs with CONFIG_PROC_FS When testing a special config: CONFIG_NETFS_SUPPORTS=y CONFIG_PROC_FS=n The system crashes with something like: [ 3.766197] ------------[ cut here ]------------ [ 3.766484] kernel BUG at mm/mempool.c:560! [ 3.766789] Oops: invalid opcode: 0000 [#1] SMP NOPTI [ 3.767123] CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Tainted: G W [ 3.767777] Tainted: [W]=WARN [ 3.767968] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), [ 3.768523] RIP: 0010:mempool_alloc_slab.cold+0x17/0x19 [ 3.768847] Code: 50 fe ff 58 5b 5d 41 5c 41 5d 41 5e 41 5f e9 93 95 13 00 [ 3.769977] RSP: 0018:ffffc90000013998 EFLAGS: 00010286 [ 3.770315] RAX: 000000000000002f RBX: ffff888100ba8640 RCX: 0000000000000000 [ 3.770749] RDX: 0000000000000000 RSI: 0000000000000003 RDI: 00000000ffffffff [ 3.771217] RBP: 0000000000092880 R08: 0000000000000000 R09: ffffc90000013828 [ 3.771664] R10: 0000000000000001 R11: 00000000ffffffea R12: 0000000000092cc0 [ 3.772117] R13: 0000000000000400 R14: ffff8881004b1620 R15: ffffea0004ef7e40 [ 3.772554] FS: 0000000000000000(0000) GS:ffff8881b5f3c000(0000) knlGS:0000000000000000 [ 3.773061] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3.773443] CR2: ffffffff830901b4 CR3: 0000000004296001 CR4: 0000000000770ef0 [ 3.773884] PKRU: 55555554 [ 3.774058] Call Trace: [ 3.774232] <TASK> [ 3.774371] mempool_alloc_noprof+0x6a/0x190 [ 3.774649] ? _printk+0x57/0x80 [ 3.774862] netfs_alloc_request+0x85/0x2ce [ 3.775147] netfs_readahead+0x28/0x170 [ 3.775395] read_pages+0x6c/0x350 [ 3.775623] ? srso_alias_return_thunk+0x5/0xfbef5 [ 3.775928] page_cache_ra_unbounded+0x1bd/0x2a0 [ 3.776247] filemap_get_pages+0x139/0x970 [ 3.776510] ? srso_alias_return_thunk+0x5/0xfbef5 [ 3.776820] filemap_read+0xf9/0x580 [ 3.777054] ? srso_alias_return_thunk+0x5/0xfbef5 [ 3.777368] ? srso_alias_return_thunk+0x5/0xfbef5 [ 3.777674] ? find_held_lock+0x32/0x90 [ 3.777929] ? netfs_start_io_read+0x19/0x70 [ 3.778221] ? netfs_start_io_read+0x19/0x70 [ 3.778489] ? srso_alias_return_thunk+0x5/0xfbef5 [ 3.778800] ? lock_acquired+0x1e6/0x450 [ 3.779054] ? srso_alias_return_thunk+0x5/0xfbef5 [ 3.779379] netfs_buffered_read_iter+0x57/0x80 [ 3.779670] __kernel_read+0x158/0x2c0 [ 3.779927] bprm_execve+0x300/0x7a0 [ 3.780185] kernel_execve+0x10c/0x140 [ 3.780423] ? __pfx_kernel_init+0x10/0x10 [ 3.780690] kernel_init+0xd5/0x150 [ 3.780910] ret_from_fork+0x2d/0x50 [ 3.781156] ? __pfx_kernel_init+0x10/0x10 [ 3.781414] ret_from_fork_asm+0x1a/0x30 [ 3.781677] </TASK> [ 3.781823] Modules linked in: [ 3.782065] ---[ end trace 0000000000000000 ]--- This is caused by the following error path in netfs_init(): if (!proc_mkdir("fs/netfs", NULL)) goto error_proc; Fix this by adding ifdef in netfs_main(), so that /proc/fs/netfs is only created with CONFIG_PROC_FS.

In the Linux kernel, the following vulnerability has been resolved: atm: clip: Fix potential null-ptr-deref in to_atmarpd(). atmarpd is protected by RTNL since commit f3a0592b37b8 ("[ATM]: clip causes unregister hang"). However, it is not enough because to_atmarpd() is called without RTNL, especially clip_neigh_solicit() / neigh_ops->solicit() is unsleepable. Also, there is no RTNL dependency around atmarpd. Let's use a private mutex and RCU to protect access to atmarpd in to_atmarpd().

In the Linux kernel, the following vulnerability has been resolved: x86/resctrl: Fix allocation of cleanest CLOSID on platforms with no monitors Commit 6eac36bb9eb0 ("x86/resctrl: Allocate the cleanest CLOSID by searching closid_num_dirty_rmid") added logic that causes resctrl to search for the CLOSID with the fewest dirty cache lines when creating a new control group, if requested by the arch code. This depends on the values read from the llc_occupancy counters. The logic is applicable to architectures where the CLOSID effectively forms part of the monitoring identifier and so do not allow complete freedom to choose an unused monitoring identifier for a given CLOSID. This support missed that some platforms may not have these counters. This causes a NULL pointer dereference when creating a new control group as the array was not allocated by dom_data_init(). As this feature isn't necessary on platforms that don't have cache occupancy monitors, add this to the check that occurs when a new control group is allocated.

In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix panic in failed foilio allocation commit 7e119cff9d0a ("ocfs2: convert w_pages to w_folios") and commit 9a5e08652dc4b ("ocfs2: use an array of folios instead of an array of pages") save -ENOMEM in the folio array upon allocation failure and call the folio array free code. The folio array free code expects either valid folio pointers or NULL. Finding the -ENOMEM will result in a panic. Fix by NULLing the error folio entry.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btusb: avoid NULL pointer dereference in skb_dequeue() A NULL pointer dereference can occur in skb_dequeue() when processing a QCA firmware crash dump on WCN7851 (0489:e0f3). [ 93.672166] Bluetooth: hci0: ACL memdump size(589824) [ 93.672475] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 93.672517] Workqueue: hci0 hci_devcd_rx [bluetooth] [ 93.672598] RIP: 0010:skb_dequeue+0x50/0x80 The issue stems from handle_dump_pkt_qca() returning 0 even when a dump packet is successfully processed. This is because it incorrectly forwards the return value of hci_devcd_init() (which returns 0 on success). As a result, the caller (btusb_recv_acl_qca() or btusb_recv_evt_qca()) assumes the packet was not handled and passes it to hci_recv_frame(), leading to premature kfree() of the skb. Later, hci_devcd_rx() attempts to dequeue the same skb from the dump queue, resulting in a NULL pointer dereference. Fix this by: 1. Making handle_dump_pkt_qca() return 0 on success and negative errno on failure, consistent with kernel conventions. 2. Splitting dump packet detection into separate functions for ACL and event packets for better structure and readability. This ensures dump packets are properly identified and consumed, avoiding double handling and preventing NULL pointer access.

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7915: Fix null-ptr-deref in mt7915_mmio_wed_init() devm_ioremap() returns NULL on error. Currently, mt7915_mmio_wed_init() does not check for this case, which results in a NULL pointer dereference. Prevent null pointer dereference in mt7915_mmio_wed_init().

In the Linux kernel, the following vulnerability has been resolved: riscv: fix runtime constant support for nommu kernels the `__runtime_fixup_32` function does not handle the case where `val` is zero correctly (as might occur when patching a nommu kernel and referring to a physical address below the 4GiB boundary whose upper 32 bits are all zero) because nothing in the existing logic prevents the code from taking the `else` branch of both nop-checks and emitting two `nop` instructions. This leaves random garbage in the register that is supposed to receive the upper 32 bits of the pointer instead of zero that when combined with the value for the lower 32 bits yields an invalid pointer and causes a kernel panic when that pointer is eventually accessed. The author clearly considered the fact that if the `lui` is converted into a `nop` that the second instruction needs to be adjusted to become an `li` instead of an `addi`, hence introducing the `addi_insn_mask` variable, but didn't follow that logic through fully to the case where the `else` branch executes. To fix it just adjust the logic to ensure that the second `else` branch is not taken if the first instruction will be patched to a `nop`.