In the Linux kernel, the following vulnerability has been resolved: blk-iolatency: Fix memory leak on add_disk() failures When a gendisk is successfully initialized but add_disk() fails such as when a loop device has invalid number of minor device numbers specified, blkcg_init_disk() is called during init and then blkcg_exit_disk() during error handling. Unfortunately, iolatency gets initialized in the former but doesn't get cleaned up in the latter. This is because, in non-error cases, the cleanup is performed by del_gendisk() calling rq_qos_exit(), the assumption being that rq_qos policies, iolatency being one of them, can only be activated once the disk is fully registered and visible. That assumption is true for wbt and iocost, but not so for iolatency as it gets initialized before add_disk() is called. It is desirable to lazy-init rq_qos policies because they are optional features and add to hot path overhead once initialized - each IO has to walk all the registered rq_qos policies. So, we want to switch iolatency to lazy init too. However, that's a bigger change. As a fix for the immediate problem, let's just add an extra call to rq_qos_exit() in blkcg_exit_disk(). This is safe because duplicate calls to rq_qos_exit() become noop's.

In the Linux kernel, the following vulnerability has been resolved: memcg: fix soft lockup in the OOM process A soft lockup issue was found in the product with about 56,000 tasks were in the OOM cgroup, it was traversing them when the soft lockup was triggered. watchdog: BUG: soft lockup - CPU#2 stuck for 23s! [VM Thread:1503066] CPU: 2 PID: 1503066 Comm: VM Thread Kdump: loaded Tainted: G Hardware name: Huawei Cloud OpenStack Nova, BIOS RIP: 0010:console_unlock+0x343/0x540 RSP: 0000:ffffb751447db9a0 EFLAGS: 00000247 ORIG_RAX: ffffffffffffff13 RAX: 0000000000000001 RBX: 0000000000000000 RCX: 00000000ffffffff RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000000000000247 RBP: ffffffffafc71f90 R08: 0000000000000000 R09: 0000000000000040 R10: 0000000000000080 R11: 0000000000000000 R12: ffffffffafc74bd0 R13: ffffffffaf60a220 R14: 0000000000000247 R15: 0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f2fe6ad91f0 CR3: 00000004b2076003 CR4: 0000000000360ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: vprintk_emit+0x193/0x280 printk+0x52/0x6e dump_task+0x114/0x130 mem_cgroup_scan_tasks+0x76/0x100 dump_header+0x1fe/0x210 oom_kill_process+0xd1/0x100 out_of_memory+0x125/0x570 mem_cgroup_out_of_memory+0xb5/0xd0 try_charge+0x720/0x770 mem_cgroup_try_charge+0x86/0x180 mem_cgroup_try_charge_delay+0x1c/0x40 do_anonymous_page+0xb5/0x390 handle_mm_fault+0xc4/0x1f0 This is because thousands of processes are in the OOM cgroup, it takes a long time to traverse all of them. As a result, this lead to soft lockup in the OOM process. To fix this issue, call 'cond_resched' in the 'mem_cgroup_scan_tasks' function per 1000 iterations. For global OOM, call 'touch_softlockup_watchdog' per 1000 iterations to avoid this issue.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: set ATTR_CTIME flags when setting mtime David reported that the new warning from setattr_copy_mgtime is coming like the following. [ 113.215316] ------------[ cut here ]------------ [ 113.215974] WARNING: CPU: 1 PID: 31 at fs/attr.c:300 setattr_copy+0x1ee/0x200 [ 113.219192] CPU: 1 UID: 0 PID: 31 Comm: kworker/1:1 Not tainted 6.13.0-rc1+ #234 [ 113.220127] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014 [ 113.221530] Workqueue: ksmbd-io handle_ksmbd_work [ksmbd] [ 113.222220] RIP: 0010:setattr_copy+0x1ee/0x200 [ 113.222833] Code: 24 28 49 8b 44 24 30 48 89 53 58 89 43 6c 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc 48 89 df e8 77 d6 ff ff e9 cd fe ff ff <0f> 0b e9 be fe ff ff 66 0 [ 113.225110] RSP: 0018:ffffaf218010fb68 EFLAGS: 00010202 [ 113.225765] RAX: 0000000000000120 RBX: ffffa446815f8568 RCX: 0000000000000003 [ 113.226667] RDX: ffffaf218010fd38 RSI: ffffa446815f8568 RDI: ffffffff94eb03a0 [ 113.227531] RBP: ffffaf218010fb90 R08: 0000001a251e217d R09: 00000000675259fa [ 113.228426] R10: 0000000002ba8a6d R11: ffffa4468196c7a8 R12: ffffaf218010fd38 [ 113.229304] R13: 0000000000000120 R14: ffffffff94eb03a0 R15: 0000000000000000 [ 113.230210] FS: 0000000000000000(0000) GS:ffffa44739d00000(0000) knlGS:0000000000000000 [ 113.231215] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 113.232055] CR2: 00007efe0053d27e CR3: 000000000331a000 CR4: 00000000000006b0 [ 113.232926] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 113.233812] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 113.234797] Call Trace: [ 113.235116] <TASK> [ 113.235393] ? __warn+0x73/0xd0 [ 113.235802] ? setattr_copy+0x1ee/0x200 [ 113.236299] ? report_bug+0xf3/0x1e0 [ 113.236757] ? handle_bug+0x4d/0x90 [ 113.237202] ? exc_invalid_op+0x13/0x60 [ 113.237689] ? asm_exc_invalid_op+0x16/0x20 [ 113.238185] ? setattr_copy+0x1ee/0x200 [ 113.238692] btrfs_setattr+0x80/0x820 [btrfs] [ 113.239285] ? get_stack_info_noinstr+0x12/0xf0 [ 113.239857] ? __module_address+0x22/0xa0 [ 113.240368] ? handle_ksmbd_work+0x6e/0x460 [ksmbd] [ 113.240993] ? __module_text_address+0x9/0x50 [ 113.241545] ? __module_address+0x22/0xa0 [ 113.242033] ? unwind_next_frame+0x10e/0x920 [ 113.242600] ? __pfx_stack_trace_consume_entry+0x10/0x10 [ 113.243268] notify_change+0x2c2/0x4e0 [ 113.243746] ? stack_depot_save_flags+0x27/0x730 [ 113.244339] ? set_file_basic_info+0x130/0x2b0 [ksmbd] [ 113.244993] set_file_basic_info+0x130/0x2b0 [ksmbd] [ 113.245613] ? process_scheduled_works+0xbe/0x310 [ 113.246181] ? worker_thread+0x100/0x240 [ 113.246696] ? kthread+0xc8/0x100 [ 113.247126] ? ret_from_fork+0x2b/0x40 [ 113.247606] ? ret_from_fork_asm+0x1a/0x30 [ 113.248132] smb2_set_info+0x63f/0xa70 [ksmbd] ksmbd is trying to set the atime and mtime via notify_change without also setting the ctime. so This patch add ATTR_CTIME flags when setting mtime to avoid a warning.

In the Linux kernel, the following vulnerability has been resolved: rtc: class: Fix potential memleak in devm_rtc_allocate_device() devm_rtc_allocate_device() will alloc a rtc_device first, and then run dev_set_name(). If dev_set_name() failed, the rtc_device will memleak. Move devm_add_action_or_reset() in front of dev_set_name() to prevent memleak. unreferenced object 0xffff888110a53000 (size 2048): comm "python3", pid 470, jiffies 4296078308 (age 58.882s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 08 30 a5 10 81 88 ff ff .........0...... 08 30 a5 10 81 88 ff ff 00 00 00 00 00 00 00 00 .0.............. backtrace: [<000000004aac0364>] kmalloc_trace+0x21/0x110 [<000000000ff02202>] devm_rtc_allocate_device+0xd4/0x400 [<000000001bdf5639>] devm_rtc_device_register+0x1a/0x80 [<00000000351bf81c>] rx4581_probe+0xdd/0x110 [rtc_rx4581] [<00000000f0eba0ae>] spi_probe+0xde/0x130 [<00000000bff89ee8>] really_probe+0x175/0x3f0 [<00000000128e8d84>] __driver_probe_device+0xe6/0x170 [<00000000ee5bf913>] device_driver_attach+0x32/0x80 [<00000000f3f28f92>] bind_store+0x10b/0x1a0 [<000000009ff812d8>] drv_attr_store+0x49/0x70 [<000000008139c323>] sysfs_kf_write+0x8d/0xb0 [<00000000b6146e01>] kernfs_fop_write_iter+0x214/0x2d0 [<00000000ecbe3895>] vfs_write+0x61a/0x7d0 [<00000000aa2196ea>] ksys_write+0xc8/0x190 [<0000000046a600f5>] do_syscall_64+0x37/0x90 [<00000000541a336f>] entry_SYSCALL_64_after_hwframe+0x63/0xcd

In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix RCU stall while reaping monitor destination ring While processing the monitor destination ring, MSDUs are reaped from the link descriptor based on the corresponding buf_id. However, sometimes the driver cannot obtain a valid buffer corresponding to the buf_id received from the hardware. This causes an infinite loop in the destination processing, resulting in a kernel crash. kernel log: ath11k_pci 0000:58:00.0: data msdu_pop: invalid buf_id 309 ath11k_pci 0000:58:00.0: data dp_rx_monitor_link_desc_return failed ath11k_pci 0000:58:00.0: data msdu_pop: invalid buf_id 309 ath11k_pci 0000:58:00.0: data dp_rx_monitor_link_desc_return failed Fix this by skipping the problematic buf_id and reaping the next entry, replacing the break with the next MSDU processing. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1

In the Linux kernel, the following vulnerability has been resolved: media: nuvoton: Fix an error check in npcm_video_ece_init() When function of_find_device_by_node() fails, it returns NULL instead of an error code. So the corresponding error check logic should be modified to check whether the return value is NULL and set the error code to be returned as -ENODEV.

In the Linux kernel, the following vulnerability has been resolved: bpf: check changes_pkt_data property for extension programs When processing calls to global sub-programs, verifier decides whether to invalidate all packet pointers in current state depending on the changes_pkt_data property of the global sub-program. Because of this, an extension program replacing a global sub-program must be compatible with changes_pkt_data property of the sub-program being replaced. This commit: - adds changes_pkt_data flag to struct bpf_prog_aux: - this flag is set in check_cfg() for main sub-program; - in jit_subprogs() for other sub-programs; - modifies bpf_check_attach_btf_id() to check changes_pkt_data flag; - moves call to check_attach_btf_id() after the call to check_cfg(), because it needs changes_pkt_data flag to be set: bpf_check: ... ... - check_attach_btf_id resolve_pseudo_ldimm64 resolve_pseudo_ldimm64 --> bpf_prog_is_offloaded bpf_prog_is_offloaded check_cfg check_cfg + check_attach_btf_id ... ... The following fields are set by check_attach_btf_id(): - env->ops - prog->aux->attach_btf_trace - prog->aux->attach_func_name - prog->aux->attach_func_proto - prog->aux->dst_trampoline - prog->aux->mod - prog->aux->saved_dst_attach_type - prog->aux->saved_dst_prog_type - prog->expected_attach_type Neither of these fields are used by resolve_pseudo_ldimm64() or bpf_prog_offload_verifier_prep() (for netronome and netdevsim drivers), so the reordering is safe.

net/unix/af_unix.c in the Linux kernel 2.6.31.4 and earlier allows local users to cause a denial of service (system hang) by creating an abstract-namespace AF_UNIX listening socket, performing a shutdown operation on this socket, and then performing a series of connect operations to this socket.

In the Linux kernel, the following vulnerability has been resolved: PCI: imx6: Fix suspend/resume support on i.MX6QDL The suspend/resume functionality is currently broken on the i.MX6QDL platform, as documented in the NXP errata (ERR005723): https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf This patch addresses the issue by sharing most of the suspend/resume sequences used by other i.MX devices, while avoiding modifications to critical registers that disrupt the PCIe functionality. It targets the same problem as the following downstream commit: https://github.com/nxp-imx/linux-imx/commit/4e92355e1f79d225ea842511fcfd42b343b32995 Unlike the downstream commit, this patch also resets the connected PCIe device if possible. Without this reset, certain drivers, such as ath10k or iwlwifi, will crash on resume. The device reset is also done by the driver on other i.MX platforms, making this patch consistent with existing practices. Upon resuming, the kernel will hang and display an error. Here's an example of the error encountered with the ath10k driver: ath10k_pci 0000:01:00.0: Unable to change power state from D3hot to D0, device inaccessible Unhandled fault: imprecise external abort (0x1406) at 0x0106f944 Without this patch, suspend/resume will fail on i.MX6QDL devices if a PCIe device is connected. [kwilczynski: commit log, added tag for stable releases]

In the Linux kernel, the following vulnerability has been resolved: mm: vmscan: account for free pages to prevent infinite Loop in throttle_direct_reclaim() The task sometimes continues looping in throttle_direct_reclaim() because allow_direct_reclaim(pgdat) keeps returning false. #0 [ffff80002cb6f8d0] __switch_to at ffff8000080095ac #1 [ffff80002cb6f900] __schedule at ffff800008abbd1c #2 [ffff80002cb6f990] schedule at ffff800008abc50c #3 [ffff80002cb6f9b0] throttle_direct_reclaim at ffff800008273550 #4 [ffff80002cb6fa20] try_to_free_pages at ffff800008277b68 #5 [ffff80002cb6fae0] __alloc_pages_nodemask at ffff8000082c4660 #6 [ffff80002cb6fc50] alloc_pages_vma at ffff8000082e4a98 #7 [ffff80002cb6fca0] do_anonymous_page at ffff80000829f5a8 #8 [ffff80002cb6fce0] __handle_mm_fault at ffff8000082a5974 #9 [ffff80002cb6fd90] handle_mm_fault at ffff8000082a5bd4 At this point, the pgdat contains the following two zones: NODE: 4 ZONE: 0 ADDR: ffff00817fffe540 NAME: "DMA32" SIZE: 20480 MIN/LOW/HIGH: 11/28/45 VM_STAT: NR_FREE_PAGES: 359 NR_ZONE_INACTIVE_ANON: 18813 NR_ZONE_ACTIVE_ANON: 0 NR_ZONE_INACTIVE_FILE: 50 NR_ZONE_ACTIVE_FILE: 0 NR_ZONE_UNEVICTABLE: 0 NR_ZONE_WRITE_PENDING: 0 NR_MLOCK: 0 NR_BOUNCE: 0 NR_ZSPAGES: 0 NR_FREE_CMA_PAGES: 0 NODE: 4 ZONE: 1 ADDR: ffff00817fffec00 NAME: "Normal" SIZE: 8454144 PRESENT: 98304 MIN/LOW/HIGH: 68/166/264 VM_STAT: NR_FREE_PAGES: 146 NR_ZONE_INACTIVE_ANON: 94668 NR_ZONE_ACTIVE_ANON: 3 NR_ZONE_INACTIVE_FILE: 735 NR_ZONE_ACTIVE_FILE: 78 NR_ZONE_UNEVICTABLE: 0 NR_ZONE_WRITE_PENDING: 0 NR_MLOCK: 0 NR_BOUNCE: 0 NR_ZSPAGES: 0 NR_FREE_CMA_PAGES: 0 In allow_direct_reclaim(), while processing ZONE_DMA32, the sum of inactive/active file-backed pages calculated in zone_reclaimable_pages() based on the result of zone_page_state_snapshot() is zero. Additionally, since this system lacks swap, the calculation of inactive/ active anonymous pages is skipped. crash> p nr_swap_pages nr_swap_pages = $1937 = { counter = 0 } As a result, ZONE_DMA32 is deemed unreclaimable and skipped, moving on to the processing of the next zone, ZONE_NORMAL, despite ZONE_DMA32 having free pages significantly exceeding the high watermark. The problem is that the pgdat->kswapd_failures hasn't been incremented. crash> px ((struct pglist_data *) 0xffff00817fffe540)->kswapd_failures $1935 = 0x0 This is because the node deemed balanced. The node balancing logic in balance_pgdat() evaluates all zones collectively. If one or more zones (e.g., ZONE_DMA32) have enough free pages to meet their watermarks, the entire node is deemed balanced. This causes balance_pgdat() to exit early before incrementing the kswapd_failures, as it considers the overall memory state acceptable, even though some zones (like ZONE_NORMAL) remain under significant pressure. The patch ensures that zone_reclaimable_pages() includes free pages (NR_FREE_PAGES) in its calculation when no other reclaimable pages are available (e.g., file-backed or anonymous pages). This change prevents zones like ZONE_DMA32, which have sufficient free pages, from being mistakenly deemed unreclaimable. By doing so, the patch ensures proper node balancing, avoids masking pressure on other zones like ZONE_NORMAL, and prevents infinite loops in throttle_direct_reclaim() caused by allow_direct_reclaim(pgdat) repeatedly returning false. The kernel hangs due to a task stuck in throttle_direct_reclaim(), caused by a node being incorrectly deemed balanced despite pressure in certain zones, such as ZONE_NORMAL. This issue arises from zone_reclaimable_pages ---truncated---

In the Linux kernel, the following vulnerability has been resolved: tomoyo: don't emit warning in tomoyo_write_control() syzbot is reporting too large allocation warning at tomoyo_write_control(), for one can write a very very long line without new line character. To fix this warning, I use __GFP_NOWARN rather than checking for KMALLOC_MAX_SIZE, for practically a valid line should be always shorter than 32KB where the "too small to fail" memory-allocation rule applies. One might try to write a valid line that is longer than 32KB, but such request will likely fail with -ENOMEM. Therefore, I feel that separately returning -EINVAL when a line is longer than KMALLOC_MAX_SIZE is redundant. There is no need to distinguish over-32KB and over-KMALLOC_MAX_SIZE.

In the Linux kernel, the following vulnerability has been resolved: pinctrl: mcp23s08: Fix sleeping in atomic context due to regmap locking If a device uses MCP23xxx IO expander to receive IRQs, the following bug can happen: BUG: sleeping function called from invalid context at kernel/locking/mutex.c:283 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, ... preempt_count: 1, expected: 0 ... Call Trace: ... __might_resched+0x104/0x10e __might_sleep+0x3e/0x62 mutex_lock+0x20/0x4c regmap_lock_mutex+0x10/0x18 regmap_update_bits_base+0x2c/0x66 mcp23s08_irq_set_type+0x1ae/0x1d6 __irq_set_trigger+0x56/0x172 __setup_irq+0x1e6/0x646 request_threaded_irq+0xb6/0x160 ... We observed the problem while experimenting with a touchscreen driver which used MCP23017 IO expander (I2C). The regmap in the pinctrl-mcp23s08 driver uses a mutex for protection from concurrent accesses, which is the default for regmaps without .fast_io, .disable_locking, etc. mcp23s08_irq_set_type() calls regmap_update_bits_base(), and the latter locks the mutex. However, __setup_irq() locks desc->lock spinlock before calling these functions. As a result, the system tries to lock the mutex whole holding the spinlock. It seems, the internal regmap locks are not needed in this driver at all. mcp->lock seems to protect the regmap from concurrent accesses already, except, probably, in mcp_pinconf_get/set. mcp23s08_irq_set_type() and mcp23s08_irq_mask/unmask() are called under chip_bus_lock(), which calls mcp23s08_irq_bus_lock(). The latter takes mcp->lock and enables regmap caching, so that the potentially slow I2C accesses are deferred until chip_bus_unlock(). The accesses to the regmap from mcp23s08_probe_one() do not need additional locking. In all remaining places where the regmap is accessed, except mcp_pinconf_get/set(), the driver already takes mcp->lock. This patch adds locking in mcp_pinconf_get/set() and disables internal locking in the regmap config. Among other things, it fixes the sleeping in atomic context described above.

In the Linux kernel, the following vulnerability has been resolved: printk: Fix signed integer overflow when defining LOG_BUF_LEN_MAX Shifting 1 << 31 on a 32-bit int causes signed integer overflow, which leads to undefined behavior. To prevent this, cast 1 to u32 before performing the shift, ensuring well-defined behavior. This change explicitly avoids any potential overflow by ensuring that the shift occurs on an unsigned 32-bit integer.

In the Linux kernel, the following vulnerability has been resolved: HID: core: Fix assumption that Resolution Multipliers must be in Logical Collections A report in 2019 by the syzbot fuzzer was found to be connected to two errors in the HID core associated with Resolution Multipliers. One of the errors was fixed by commit ea427a222d8b ("HID: core: Fix deadloop in hid_apply_multiplier."), but the other has not been fixed. This error arises because hid_apply_multipler() assumes that every Resolution Multiplier control is contained in a Logical Collection, i.e., there's no way the routine can ever set multiplier_collection to NULL. This is in spite of the fact that the function starts with a big comment saying: * "The Resolution Multiplier control must be contained in the same * Logical Collection as the control(s) to which it is to be applied. ... * If no Logical Collection is * defined, the Resolution Multiplier is associated with all * controls in the report." * HID Usage Table, v1.12, Section 4.3.1, p30 * * Thus, search from the current collection upwards until we find a * logical collection... The comment and the code overlook the possibility that none of the collections found may be a Logical Collection. The fix is to set the multiplier_collection pointer to NULL if the collection found isn't a Logical Collection.

In the Linux kernel, the following vulnerability has been resolved: KEYS: trusted: dcp: fix improper sg use with CONFIG_VMAP_STACK=y With vmalloc stack addresses enabled (CONFIG_VMAP_STACK=y) DCP trusted keys can crash during en- and decryption of the blob encryption key via the DCP crypto driver. This is caused by improperly using sg_init_one() with vmalloc'd stack buffers (plain_key_blob). Fix this by always using kmalloc() for buffers we give to the DCP crypto driver.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_{ldisc,serdev}: check percpu_init_rwsem() failure syzbot is reporting NULL pointer dereference at hci_uart_tty_close() [1], for rcu_sync_enter() is called without rcu_sync_init() due to hci_uart_tty_open() ignoring percpu_init_rwsem() failure. While we are at it, fix that hci_uart_register_device() ignores percpu_init_rwsem() failure and hci_uart_unregister_device() does not call percpu_free_rwsem().

In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: fix new damon_target objects leaks on damon_commit_targets() Patch series "mm/damon/core: fix memory leaks and ignored inputs from damon_commit_ctx()". Due to two bugs in damon_commit_targets() and damon_commit_schemes(), which are called from damon_commit_ctx(), some user inputs can be ignored, and some mmeory objects can be leaked. Fix those. Note that only DAMON sysfs interface users are affected. Other DAMON core API user modules that more focused more on simple and dedicated production usages, including DAMON_RECLAIM and DAMON_LRU_SORT are not using the buggy function in the way, so not affected. This patch (of 2): When new DAMON targets are added via damon_commit_targets(), the newly created targets are not deallocated when updating the internal data (damon_commit_target()) is failed. Worse yet, even if the setup is successfully done, the new target is not linked to the context. Hence, the new targets are always leaked regardless of the internal data setup failure. Fix the leaks.

In the Linux kernel, the following vulnerability has been resolved: macintosh: fix possible memory leak in macio_add_one_device() Afer commit 1fa5ae857bb1 ("driver core: get rid of struct device's bus_id string array"), the name of device is allocated dynamically. It needs to be freed when of_device_register() fails. Call put_device() to give up the reference that's taken in device_initialize(), so that it can be freed in kobject_cleanup() when the refcount hits 0. macio device is freed in macio_release_dev(), so the kfree() can be removed.

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix a memory leak in an error path of qla2x00_process_els() Commit 8c0eb596baa5 ("[SCSI] qla2xxx: Fix a memory leak in an error path of qla2x00_process_els()"), intended to change: bsg_job->request->msgcode == FC_BSG_HST_ELS_NOLOGIN bsg_job->request->msgcode != FC_BSG_RPT_ELS but changed it to: bsg_job->request->msgcode == FC_BSG_RPT_ELS instead. Change the == to a != to avoid leaking the fcport structure or freeing unallocated memory.

In the Linux kernel, the following vulnerability has been resolved: powerpc/pseries/iommu: IOMMU incorrectly marks MMIO range in DDW Power Hypervisor can possibily allocate MMIO window intersecting with Dynamic DMA Window (DDW) range, which is over 32-bit addressing. These MMIO pages needs to be marked as reserved so that IOMMU doesn't map DMA buffers in this range. The current code is not marking these pages correctly which is resulting in LPAR to OOPS while booting. The stack is at below BUG: Unable to handle kernel data access on read at 0xc00800005cd40000 Faulting instruction address: 0xc00000000005cdac Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries Modules linked in: af_packet rfkill ibmveth(X) lpfc(+) nvmet_fc nvmet nvme_keyring crct10dif_vpmsum nvme_fc nvme_fabrics nvme_core be2net(+) nvme_auth rtc_generic nfsd auth_rpcgss nfs_acl lockd grace sunrpc fuse configfs ip_tables x_tables xfs libcrc32c dm_service_time ibmvfc(X) scsi_transport_fc vmx_crypto gf128mul crc32c_vpmsum dm_mirror dm_region_hash dm_log dm_multipath dm_mod sd_mod scsi_dh_emc scsi_dh_rdac scsi_dh_alua t10_pi crc64_rocksoft_generic crc64_rocksoft sg crc64 scsi_mod Supported: Yes, External CPU: 8 PID: 241 Comm: kworker/8:1 Kdump: loaded Not tainted 6.4.0-150600.23.14-default #1 SLE15-SP6 b44ee71c81261b9e4bab5e0cde1f2ed891d5359b Hardware name: IBM,9080-M9S POWER9 (raw) 0x4e2103 0xf000005 of:IBM,FW950.B0 (VH950_149) hv:phyp pSeries Workqueue: events work_for_cpu_fn NIP: c00000000005cdac LR: c00000000005e830 CTR: 0000000000000000 REGS: c00001400c9ff770 TRAP: 0300 Not tainted (6.4.0-150600.23.14-default) MSR: 800000000280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 24228448 XER: 00000001 CFAR: c00000000005cdd4 DAR: c00800005cd40000 DSISR: 40000000 IRQMASK: 0 GPR00: c00000000005e830 c00001400c9ffa10 c000000001987d00 c00001400c4fe800 GPR04: 0000080000000000 0000000000000001 0000000004000000 0000000000800000 GPR08: 0000000004000000 0000000000000001 c00800005cd40000 ffffffffffffffff GPR12: 0000000084228882 c00000000a4c4f00 0000000000000010 0000080000000000 GPR16: c00001400c4fe800 0000000004000000 0800000000000000 c00000006088b800 GPR20: c00001401a7be980 c00001400eff3800 c000000002a2da68 000000000000002b GPR24: c0000000026793a8 c000000002679368 000000000000002a c0000000026793c8 GPR28: 000008007effffff 0000080000000000 0000000000800000 c00001400c4fe800 NIP [c00000000005cdac] iommu_table_reserve_pages+0xac/0x100 LR [c00000000005e830] iommu_init_table+0x80/0x1e0 Call Trace: [c00001400c9ffa10] [c00000000005e810] iommu_init_table+0x60/0x1e0 (unreliable) [c00001400c9ffa90] [c00000000010356c] iommu_bypass_supported_pSeriesLP+0x9cc/0xe40 [c00001400c9ffc30] [c00000000005c300] dma_iommu_dma_supported+0xf0/0x230 [c00001400c9ffcb0] [c00000000024b0c4] dma_supported+0x44/0x90 [c00001400c9ffcd0] [c00000000024b14c] dma_set_mask+0x3c/0x80 [c00001400c9ffd00] [c0080000555b715c] be_probe+0xc4/0xb90 [be2net] [c00001400c9ffdc0] [c000000000986f3c] local_pci_probe+0x6c/0x110 [c00001400c9ffe40] [c000000000188f28] work_for_cpu_fn+0x38/0x60 [c00001400c9ffe70] [c00000000018e454] process_one_work+0x314/0x620 [c00001400c9fff10] [c00000000018f280] worker_thread+0x2b0/0x620 [c00001400c9fff90] [c00000000019bb18] kthread+0x148/0x150 [c00001400c9fffe0] [c00000000000ded8] start_kernel_thread+0x14/0x18 There are 2 issues in the code 1. The index is "int" while the address is "unsigned long". This results in negative value when setting the bitmap. 2. The DMA offset is page shifted but the MMIO range is used as-is (64-bit address). MMIO address needs to be page shifted as well.

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix double accounting race when btrfs_run_delalloc_range() failed [BUG] When running btrfs with block size (4K) smaller than page size (64K, aarch64), there is a very high chance to crash the kernel at generic/750, with the following messages: (before the call traces, there are 3 extra debug messages added) BTRFS warning (device dm-3): read-write for sector size 4096 with page size 65536 is experimental BTRFS info (device dm-3): checking UUID tree hrtimer: interrupt took 5451385 ns BTRFS error (device dm-3): cow_file_range failed, root=4957 inode=257 start=1605632 len=69632: -28 BTRFS error (device dm-3): run_delalloc_nocow failed, root=4957 inode=257 start=1605632 len=69632: -28 BTRFS error (device dm-3): failed to run delalloc range, root=4957 ino=257 folio=1572864 submit_bitmap=8-15 start=1605632 len=69632: -28 ------------[ cut here ]------------ WARNING: CPU: 2 PID: 3020984 at ordered-data.c:360 can_finish_ordered_extent+0x370/0x3b8 [btrfs] CPU: 2 UID: 0 PID: 3020984 Comm: kworker/u24:1 Tainted: G OE 6.13.0-rc1-custom+ #89 Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: QEMU KVM Virtual Machine, BIOS unknown 2/2/2022 Workqueue: events_unbound btrfs_async_reclaim_data_space [btrfs] pc : can_finish_ordered_extent+0x370/0x3b8 [btrfs] lr : can_finish_ordered_extent+0x1ec/0x3b8 [btrfs] Call trace: can_finish_ordered_extent+0x370/0x3b8 [btrfs] (P) can_finish_ordered_extent+0x1ec/0x3b8 [btrfs] (L) btrfs_mark_ordered_io_finished+0x130/0x2b8 [btrfs] extent_writepage+0x10c/0x3b8 [btrfs] extent_write_cache_pages+0x21c/0x4e8 [btrfs] btrfs_writepages+0x94/0x160 [btrfs] do_writepages+0x74/0x190 filemap_fdatawrite_wbc+0x74/0xa0 start_delalloc_inodes+0x17c/0x3b0 [btrfs] btrfs_start_delalloc_roots+0x17c/0x288 [btrfs] shrink_delalloc+0x11c/0x280 [btrfs] flush_space+0x288/0x328 [btrfs] btrfs_async_reclaim_data_space+0x180/0x228 [btrfs] process_one_work+0x228/0x680 worker_thread+0x1bc/0x360 kthread+0x100/0x118 ret_from_fork+0x10/0x20 ---[ end trace 0000000000000000 ]--- BTRFS critical (device dm-3): bad ordered extent accounting, root=4957 ino=257 OE offset=1605632 OE len=16384 to_dec=16384 left=0 BTRFS critical (device dm-3): bad ordered extent accounting, root=4957 ino=257 OE offset=1622016 OE len=12288 to_dec=12288 left=0 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 BTRFS critical (device dm-3): bad ordered extent accounting, root=4957 ino=257 OE offset=1634304 OE len=8192 to_dec=4096 left=0 CPU: 1 UID: 0 PID: 3286940 Comm: kworker/u24:3 Tainted: G W OE 6.13.0-rc1-custom+ #89 Hardware name: QEMU KVM Virtual Machine, BIOS unknown 2/2/2022 Workqueue: btrfs_work_helper [btrfs] (btrfs-endio-write) pstate: 404000c5 (nZcv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : process_one_work+0x110/0x680 lr : worker_thread+0x1bc/0x360 Call trace: process_one_work+0x110/0x680 (P) worker_thread+0x1bc/0x360 (L) worker_thread+0x1bc/0x360 kthread+0x100/0x118 ret_from_fork+0x10/0x20 Code: f84086a1 f9000fe1 53041c21 b9003361 (f9400661) ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Oops: Fatal exception SMP: stopping secondary CPUs SMP: failed to stop secondary CPUs 2-3 Dumping ftrace buffer: (ftrace buffer empty) Kernel Offset: 0x275bb9540000 from 0xffff800080000000 PHYS_OFFSET: 0xffff8fbba0000000 CPU features: 0x100,00000070,00801250,8201720b [CAUSE] The above warning is triggered immediately after the delalloc range failure, this happens in the following sequence: - Range [1568K, 1636K) is dirty 1536K 1568K 1600K 1636K 1664K | |/////////|////////| | Where 1536K, 1600K and 1664K are page boundaries (64K page size) - Enter extent_writepage() for page 1536K - Enter run_delalloc_nocow() with locke ---truncated---

In the Linux kernel, the following vulnerability has been resolved: rhashtable: Fix potential deadlock by moving schedule_work outside lock Move the hash table growth check and work scheduling outside the rht lock to prevent a possible circular locking dependency. The original implementation could trigger a lockdep warning due to a potential deadlock scenario involving nested locks between rhashtable bucket, rq lock, and dsq lock. By relocating the growth check and work scheduling after releasing the rth lock, we break this potential deadlock chain. This change expands the flexibility of rhashtable by removing restrictive locking that previously limited its use in scheduler and workqueue contexts. Import to say that this calls rht_grow_above_75(), which reads from struct rhashtable without holding the lock, if this is a problem, we can move the check to the lock, and schedule the workqueue after the lock. Modified so that atomic_inc is also moved outside of the bucket lock along with the growth above 75% check.

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix transaction atomicity bug when enabling simple quotas Set squota incompat bit before committing the transaction that enables the feature. With the config CONFIG_BTRFS_ASSERT enabled, an assertion failure occurs regarding the simple quota feature. [5.596534] assertion failed: btrfs_fs_incompat(fs_info, SIMPLE_QUOTA), in fs/btrfs/qgroup.c:365 [5.597098] ------------[ cut here ]------------ [5.597371] kernel BUG at fs/btrfs/qgroup.c:365! [5.597946] CPU: 1 UID: 0 PID: 268 Comm: mount Not tainted 6.13.0-rc2-00031-gf92f4749861b #146 [5.598450] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 [5.599008] RIP: 0010:btrfs_read_qgroup_config+0x74d/0x7a0 [5.604303] <TASK> [5.605230] ? btrfs_read_qgroup_config+0x74d/0x7a0 [5.605538] ? exc_invalid_op+0x56/0x70 [5.605775] ? btrfs_read_qgroup_config+0x74d/0x7a0 [5.606066] ? asm_exc_invalid_op+0x1f/0x30 [5.606441] ? btrfs_read_qgroup_config+0x74d/0x7a0 [5.606741] ? btrfs_read_qgroup_config+0x74d/0x7a0 [5.607038] ? try_to_wake_up+0x317/0x760 [5.607286] open_ctree+0xd9c/0x1710 [5.607509] btrfs_get_tree+0x58a/0x7e0 [5.608002] vfs_get_tree+0x2e/0x100 [5.608224] fc_mount+0x16/0x60 [5.608420] btrfs_get_tree+0x2f8/0x7e0 [5.608897] vfs_get_tree+0x2e/0x100 [5.609121] path_mount+0x4c8/0xbc0 [5.609538] __x64_sys_mount+0x10d/0x150 The issue can be easily reproduced using the following reproducer: root@q:linux# cat repro.sh set -e mkfs.btrfs -q -f /dev/sdb mount /dev/sdb /mnt/btrfs btrfs quota enable -s /mnt/btrfs umount /mnt/btrfs mount /dev/sdb /mnt/btrfs The issue is that when enabling quotas, at btrfs_quota_enable(), we set BTRFS_QGROUP_STATUS_FLAG_SIMPLE_MODE at fs_info->qgroup_flags and persist it in the quota root in the item with the key BTRFS_QGROUP_STATUS_KEY, but we only set the incompat bit BTRFS_FEATURE_INCOMPAT_SIMPLE_QUOTA after we commit the transaction used to enable simple quotas. This means that if after that transaction commit we unmount the filesystem without starting and committing any other transaction, or we have a power failure, the next time we mount the filesystem we will find the flag BTRFS_QGROUP_STATUS_FLAG_SIMPLE_MODE set in the item with the key BTRFS_QGROUP_STATUS_KEY but we will not find the incompat bit BTRFS_FEATURE_INCOMPAT_SIMPLE_QUOTA set in the superblock, triggering an assertion failure at: btrfs_read_qgroup_config() -> qgroup_read_enable_gen() To fix this issue, set the BTRFS_FEATURE_INCOMPAT_SIMPLE_QUOTA flag immediately after setting the BTRFS_QGROUP_STATUS_FLAG_SIMPLE_MODE. This ensures that both flags are flushed to disk within the same transaction.

In the Linux kernel, the following vulnerability has been resolved: ASoC: soc-pcm: don't use soc_pcm_ret() on .prepare callback commit 1f5664351410 ("ASoC: lower "no backend DAIs enabled for ... Port" log severity") ignores -EINVAL error message on common soc_pcm_ret(). It is used from many functions, ignoring -EINVAL is over-kill. The reason why -EINVAL was ignored was it really should only be used upon invalid parameters coming from userspace and in that case we don't want to log an error since we do not want to give userspace a way to do a denial-of-service attack on the syslog / diskspace. So don't use soc_pcm_ret() on .prepare callback is better idea.

In the Linux kernel, the following vulnerability has been resolved: net: fix memory leak in tcp_conn_request() If inet_csk_reqsk_queue_hash_add() return false, tcp_conn_request() will return without free the dst memory, which allocated in af_ops->route_req. Here is the kmemleak stack: unreferenced object 0xffff8881198631c0 (size 240): comm "softirq", pid 0, jiffies 4299266571 (age 1802.392s) hex dump (first 32 bytes): 00 10 9b 03 81 88 ff ff 80 98 da bc ff ff ff ff ................ 81 55 18 bb ff ff ff ff 00 00 00 00 00 00 00 00 .U.............. backtrace: [<ffffffffb93e8d4c>] kmem_cache_alloc+0x60c/0xa80 [<ffffffffba11b4c5>] dst_alloc+0x55/0x250 [<ffffffffba227bf6>] rt_dst_alloc+0x46/0x1d0 [<ffffffffba23050a>] __mkroute_output+0x29a/0xa50 [<ffffffffba23456b>] ip_route_output_key_hash+0x10b/0x240 [<ffffffffba2346bd>] ip_route_output_flow+0x1d/0x90 [<ffffffffba254855>] inet_csk_route_req+0x2c5/0x500 [<ffffffffba26b331>] tcp_conn_request+0x691/0x12c0 [<ffffffffba27bd08>] tcp_rcv_state_process+0x3c8/0x11b0 [<ffffffffba2965c6>] tcp_v4_do_rcv+0x156/0x3b0 [<ffffffffba299c98>] tcp_v4_rcv+0x1cf8/0x1d80 [<ffffffffba239656>] ip_protocol_deliver_rcu+0xf6/0x360 [<ffffffffba2399a6>] ip_local_deliver_finish+0xe6/0x1e0 [<ffffffffba239b8e>] ip_local_deliver+0xee/0x360 [<ffffffffba239ead>] ip_rcv+0xad/0x2f0 [<ffffffffba110943>] __netif_receive_skb_one_core+0x123/0x140 Call dst_release() to free the dst memory when inet_csk_reqsk_queue_hash_add() return false in tcp_conn_request().

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add check for granularity in dml ceil/floor helpers [Why] Wrapper functions for dcn_bw_ceil2() and dcn_bw_floor2() should check for granularity is non zero to avoid assert and divide-by-zero error in dcn_bw_ functions. [How] Add check for granularity 0. (cherry picked from commit f6e09701c3eb2ccb8cb0518e0b67f1c69742a4ec)

In the Linux kernel, the following vulnerability has been resolved: misc: misc_minor_alloc to use ida for all dynamic/misc dynamic minors misc_minor_alloc was allocating id using ida for minor only in case of MISC_DYNAMIC_MINOR but misc_minor_free was always freeing ids using ida_free causing a mismatch and following warn: > > WARNING: CPU: 0 PID: 159 at lib/idr.c:525 ida_free+0x3e0/0x41f > > ida_free called for id=127 which is not allocated. > > <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< ... > > [<60941eb4>] ida_free+0x3e0/0x41f > > [<605ac993>] misc_minor_free+0x3e/0xbc > > [<605acb82>] misc_deregister+0x171/0x1b3 misc_minor_alloc is changed to allocate id from ida for all minors falling in the range of dynamic/ misc dynamic minors

In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: pltfrm: Dellocate HBA during ufshcd_pltfrm_remove() This will ensure that the scsi host is cleaned up properly using scsi_host_dev_release(). Otherwise, it may lead to memory leaks.

In the Linux kernel, the following vulnerability has been resolved: vmxnet3: Fix packet corruption in vmxnet3_xdp_xmit_frame Andrew and Nikolay reported connectivity issues with Cilium's service load-balancing in case of vmxnet3. If a BPF program for native XDP adds an encapsulation header such as IPIP and transmits the packet out the same interface, then in case of vmxnet3 a corrupted packet is being sent and subsequently dropped on the path. vmxnet3_xdp_xmit_frame() which is called e.g. via vmxnet3_run_xdp() through vmxnet3_xdp_xmit_back() calculates an incorrect DMA address: page = virt_to_page(xdpf->data); tbi->dma_addr = page_pool_get_dma_addr(page) + VMXNET3_XDP_HEADROOM; dma_sync_single_for_device(&adapter->pdev->dev, tbi->dma_addr, buf_size, DMA_TO_DEVICE); The above assumes a fixed offset (VMXNET3_XDP_HEADROOM), but the XDP BPF program could have moved xdp->data. While the passed buf_size is correct (xdpf->len), the dma_addr needs to have a dynamic offset which can be calculated as xdpf->data - (void *)xdpf, that is, xdp->data - xdp->data_hard_start.

In the Linux kernel, the following vulnerability has been resolved: remoteproc: core: Fix ida_free call while not allocated In the rproc_alloc() function, on error, put_device(&rproc->dev) is called, leading to the call of the rproc_type_release() function. An error can occurs before ida_alloc is called. In such case in rproc_type_release(), the condition (rproc->index >= 0) is true as rproc->index has been initialized to 0. ida_free() is called reporting a warning: [ 4.181906] WARNING: CPU: 1 PID: 24 at lib/idr.c:525 ida_free+0x100/0x164 [ 4.186378] stm32-display-dsi 5a000000.dsi: Fixed dependency cycle(s) with /soc/dsi@5a000000/panel@0 [ 4.188854] ida_free called for id=0 which is not allocated. [ 4.198256] mipi-dsi 5a000000.dsi.0: Fixed dependency cycle(s) with /soc/dsi@5a000000 [ 4.203556] Modules linked in: panel_orisetech_otm8009a dw_mipi_dsi_stm(+) gpu_sched dw_mipi_dsi stm32_rproc stm32_crc32 stm32_ipcc(+) optee(+) [ 4.224307] CPU: 1 UID: 0 PID: 24 Comm: kworker/u10:0 Not tainted 6.12.0 #442 [ 4.231481] Hardware name: STM32 (Device Tree Support) [ 4.236627] Workqueue: events_unbound deferred_probe_work_func [ 4.242504] Call trace: [ 4.242522] unwind_backtrace from show_stack+0x10/0x14 [ 4.250218] show_stack from dump_stack_lvl+0x50/0x64 [ 4.255274] dump_stack_lvl from __warn+0x80/0x12c [ 4.260134] __warn from warn_slowpath_fmt+0x114/0x188 [ 4.265199] warn_slowpath_fmt from ida_free+0x100/0x164 [ 4.270565] ida_free from rproc_type_release+0x38/0x60 [ 4.275832] rproc_type_release from device_release+0x30/0xa0 [ 4.281601] device_release from kobject_put+0xc4/0x294 [ 4.286762] kobject_put from rproc_alloc.part.0+0x208/0x28c [ 4.292430] rproc_alloc.part.0 from devm_rproc_alloc+0x80/0xc4 [ 4.298393] devm_rproc_alloc from stm32_rproc_probe+0xd0/0x844 [stm32_rproc] [ 4.305575] stm32_rproc_probe [stm32_rproc] from platform_probe+0x5c/0xbc Calling ida_alloc earlier in rproc_alloc ensures that the rproc->index is properly set.

In the Linux kernel, the following vulnerability has been resolved: net: restrict SO_REUSEPORT to inet sockets After blamed commit, crypto sockets could accidentally be destroyed from RCU call back, as spotted by zyzbot [1]. Trying to acquire a mutex in RCU callback is not allowed. Restrict SO_REUSEPORT socket option to inet sockets. v1 of this patch supported TCP, UDP and SCTP sockets, but fcnal-test.sh test needed RAW and ICMP support. [1] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:562 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 24, name: ksoftirqd/1 preempt_count: 100, expected: 0 RCU nest depth: 0, expected: 0 1 lock held by ksoftirqd/1/24: #0: ffffffff8e937ba0 (rcu_callback){....}-{0:0}, at: rcu_lock_acquire include/linux/rcupdate.h:337 [inline] #0: ffffffff8e937ba0 (rcu_callback){....}-{0:0}, at: rcu_do_batch kernel/rcu/tree.c:2561 [inline] #0: ffffffff8e937ba0 (rcu_callback){....}-{0:0}, at: rcu_core+0xa37/0x17a0 kernel/rcu/tree.c:2823 Preemption disabled at: [<ffffffff8161c8c8>] softirq_handle_begin kernel/softirq.c:402 [inline] [<ffffffff8161c8c8>] handle_softirqs+0x128/0x9b0 kernel/softirq.c:537 CPU: 1 UID: 0 PID: 24 Comm: ksoftirqd/1 Not tainted 6.13.0-rc3-syzkaller-00174-ga024e377efed #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 __might_resched+0x5d4/0x780 kernel/sched/core.c:8758 __mutex_lock_common kernel/locking/mutex.c:562 [inline] __mutex_lock+0x131/0xee0 kernel/locking/mutex.c:735 crypto_put_default_null_skcipher+0x18/0x70 crypto/crypto_null.c:179 aead_release+0x3d/0x50 crypto/algif_aead.c:489 alg_do_release crypto/af_alg.c:118 [inline] alg_sock_destruct+0x86/0xc0 crypto/af_alg.c:502 __sk_destruct+0x58/0x5f0 net/core/sock.c:2260 rcu_do_batch kernel/rcu/tree.c:2567 [inline] rcu_core+0xaaa/0x17a0 kernel/rcu/tree.c:2823 handle_softirqs+0x2d4/0x9b0 kernel/softirq.c:561 run_ksoftirqd+0xca/0x130 kernel/softirq.c:950 smpboot_thread_fn+0x544/0xa30 kernel/smpboot.c:164 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK>

In the Linux kernel, the following vulnerability has been resolved: powerpc/fadump: Move fadump_cma_init to setup_arch() after initmem_init() During early init CMA_MIN_ALIGNMENT_BYTES can be PAGE_SIZE, since pageblock_order is still zero and it gets initialized later during initmem_init() e.g. setup_arch() -> initmem_init() -> sparse_init() -> set_pageblock_order() One such use case where this causes issue is - early_setup() -> early_init_devtree() -> fadump_reserve_mem() -> fadump_cma_init() This causes CMA memory alignment check to be bypassed in cma_init_reserved_mem(). Then later cma_activate_area() can hit a VM_BUG_ON_PAGE(pfn & ((1 << order) - 1)) if the reserved memory area was not pageblock_order aligned. Fix it by moving the fadump_cma_init() after initmem_init(), where other such cma reservations also gets called. <stack trace> ============== page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x10010 flags: 0x13ffff800000000(node=1|zone=0|lastcpupid=0x7ffff) CMA raw: 013ffff800000000 5deadbeef0000100 5deadbeef0000122 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: VM_BUG_ON_PAGE(pfn & ((1 << order) - 1)) ------------[ cut here ]------------ kernel BUG at mm/page_alloc.c:778! Call Trace: __free_one_page+0x57c/0x7b0 (unreliable) free_pcppages_bulk+0x1a8/0x2c8 free_unref_page_commit+0x3d4/0x4e4 free_unref_page+0x458/0x6d0 init_cma_reserved_pageblock+0x114/0x198 cma_init_reserved_areas+0x270/0x3e0 do_one_initcall+0x80/0x2f8 kernel_init_freeable+0x33c/0x530 kernel_init+0x34/0x26c ret_from_kernel_user_thread+0x14/0x1c

In the Linux kernel, the following vulnerability has been resolved: fbdev: sh7760fb: Fix a possible memory leak in sh7760fb_alloc_mem() When information such as info->screen_base is not ready, calling sh7760fb_free_mem() does not release memory correctly. Call dma_free_coherent() instead.

In the Linux kernel, the following vulnerability has been resolved: ASoC: q6afe-clocks: fix reprobing of the driver Q6afe-clocks driver can get reprobed. For example if the APR services are restarted after the firmware crash. However currently Q6afe-clocks driver will oops because hw.init will get cleared during first _probe call. Rewrite the driver to fill the clock data at runtime rather than using big static array of clocks.

In the Linux kernel, the following vulnerability has been resolved: ocfs2: handle a symlink read error correctly Patch series "Convert ocfs2 to use folios". Mark did a conversion of ocfs2 to use folios and sent it to me as a giant patch for review ;-) So I've redone it as individual patches, and credited Mark for the patches where his code is substantially the same. It's not a bad way to do it; his patch had some bugs and my patches had some bugs. Hopefully all our bugs were different from each other. And hopefully Mark likes all the changes I made to his code! This patch (of 23): If we can't read the buffer, be sure to unlock the page before returning.

In the Linux kernel, the following vulnerability has been resolved: gpio: graniterapids: Fix vGPIO driver crash Move setting irq_chip.name from probe() function to the initialization of "irq_chip" struct in order to fix vGPIO driver crash during bootup. Crash was caused by unauthorized modification of irq_chip.name field where irq_chip struct was initialized as const. This behavior is a consequence of suboptimal implementation of gpio_irq_chip_set_chip(), which should be changed to avoid casting away const qualifier. Crash log: BUG: unable to handle page fault for address: ffffffffc0ba81c0 /#PF: supervisor write access in kernel mode /#PF: error_code(0x0003) - permissions violation CPU: 33 UID: 0 PID: 1075 Comm: systemd-udevd Not tainted 6.12.0-rc6-00077-g2e1b3cc9d7f7 #1 Hardware name: Intel Corporation Kaseyville RP/Kaseyville RP, BIOS KVLDCRB1.PGS.0026.D73.2410081258 10/08/2024 RIP: 0010:gnr_gpio_probe+0x171/0x220 [gpio_graniterapids]

In the Linux kernel, the following vulnerability has been resolved: scsi: qedf: Fix a possible memory leak in qedf_alloc_and_init_sb() Hook "qed_ops->common->sb_init = qed_sb_init" does not release the DMA memory sb_virt when it fails. Add dma_free_coherent() to free it. This is the same way as qedr_alloc_mem_sb() and qede_alloc_mem_sb().

In the Linux kernel, the following vulnerability has been resolved: can: dev: can_set_termination(): allow sleeping GPIOs In commit 6e86a1543c37 ("can: dev: provide optional GPIO based termination support") GPIO based termination support was added. For no particular reason that patch uses gpiod_set_value() to set the GPIO. This leads to the following warning, if the systems uses a sleeping GPIO, i.e. behind an I2C port expander: | WARNING: CPU: 0 PID: 379 at /drivers/gpio/gpiolib.c:3496 gpiod_set_value+0x50/0x6c | CPU: 0 UID: 0 PID: 379 Comm: ip Not tainted 6.11.0-20241016-1 #1 823affae360cc91126e4d316d7a614a8bf86236c Replace gpiod_set_value() by gpiod_set_value_cansleep() to allow the use of sleeping GPIOs.

In the Linux kernel, the following vulnerability has been resolved: slab: Fix too strict alignment check in create_cache() On m68k, where the minimum alignment of unsigned long is 2 bytes: Kernel panic - not syncing: __kmem_cache_create_args: Failed to create slab 'io_kiocb'. Error -22 CPU: 0 UID: 0 PID: 1 Comm: swapper Not tainted 6.12.0-atari-03776-g7eaa1f99261a #1783 Stack from 0102fe5c: 0102fe5c 00514a2b 00514a2b ffffff00 00000001 0051f5ed 00425e78 00514a2b 0041eb74 ffffffea 00000310 0051f5ed ffffffea ffffffea 00601f60 00000044 0102ff20 000e7a68 0051ab8e 004383b8 0051f5ed ffffffea 000000b8 00000007 01020c00 00000000 000e77f0 0041e5f0 005f67c0 0051f5ed 000000b6 0102fef4 00000310 0102fef4 00000000 00000016 005f676c 0060a34c 00000010 00000004 00000038 0000009a 01000000 000000b8 005f668e 0102e000 00001372 0102ff88 Call Trace: [<00425e78>] dump_stack+0xc/0x10 [<0041eb74>] panic+0xd8/0x26c [<000e7a68>] __kmem_cache_create_args+0x278/0x2e8 [<000e77f0>] __kmem_cache_create_args+0x0/0x2e8 [<0041e5f0>] memset+0x0/0x8c [<005f67c0>] io_uring_init+0x54/0xd2 The minimal alignment of an integral type may differ from its size, hence is not safe to assume that an arbitrary freeptr_t (which is basically an unsigned long) is always aligned to 4 or 8 bytes. As nothing seems to require the additional alignment, it is safe to fix this by relaxing the check to the actual minimum alignment of freeptr_t.

In the Linux kernel, the following vulnerability has been resolved: bpf: fix recursive lock when verdict program return SK_PASS When the stream_verdict program returns SK_PASS, it places the received skb into its own receive queue, but a recursive lock eventually occurs, leading to an operating system deadlock. This issue has been present since v6.9. ''' sk_psock_strp_data_ready write_lock_bh(&sk->sk_callback_lock) strp_data_ready strp_read_sock read_sock -> tcp_read_sock strp_recv cb.rcv_msg -> sk_psock_strp_read # now stream_verdict return SK_PASS without peer sock assign __SK_PASS = sk_psock_map_verd(SK_PASS, NULL) sk_psock_verdict_apply sk_psock_skb_ingress_self sk_psock_skb_ingress_enqueue sk_psock_data_ready read_lock_bh(&sk->sk_callback_lock) <= dead lock ''' This topic has been discussed before, but it has not been fixed. Previous discussion: https://lore.kernel.org/all/6684a5864ec86_403d20898@john.notmuch

NVIDIA GPU Display Driver for Windows and Linux contains a vulnerability in the kernel mode layer handler, where an unprivileged user can cause improper restriction of operations within the bounds of a memory buffer cause an out-of-bounds read, which may lead to denial of service.

In the Linux kernel, the following vulnerability has been resolved: drivers: serial: jsm: fix some leaks in probe This error path needs to unwind instead of just returning directly.

In the Linux kernel, the following vulnerability has been resolved: dpaa2-eth: retrieve the virtual address before dma_unmap The TSO header was DMA unmapped before the virtual address was retrieved and then used to free the buffer. This meant that we were actually removing the DMA map and then trying to search for it to help in retrieving the virtual address. This lead to a invalid virtual address being used in the kfree call. Fix this by calling dpaa2_iova_to_virt() prior to the dma_unmap call. [ 487.231819] Unable to handle kernel paging request at virtual address fffffd9807000008 (...) [ 487.354061] Hardware name: SolidRun LX2160A Honeycomb (DT) [ 487.359535] pstate: a0400005 (NzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 487.366485] pc : kfree+0xac/0x304 [ 487.369799] lr : kfree+0x204/0x304 [ 487.373191] sp : ffff80000c4eb120 [ 487.376493] x29: ffff80000c4eb120 x28: ffff662240c46400 x27: 0000000000000001 [ 487.383621] x26: 0000000000000001 x25: ffff662246da0cc0 x24: ffff66224af78000 [ 487.390748] x23: ffffad184f4ce008 x22: ffffad1850185000 x21: ffffad1838d13cec [ 487.397874] x20: ffff6601c0000000 x19: fffffd9807000000 x18: 0000000000000000 [ 487.405000] x17: ffffb910cdc49000 x16: ffffad184d7d9080 x15: 0000000000004000 [ 487.412126] x14: 0000000000000008 x13: 000000000000ffff x12: 0000000000000000 [ 487.419252] x11: 0000000000000004 x10: 0000000000000001 x9 : ffffad184d7d927c [ 487.426379] x8 : 0000000000000000 x7 : 0000000ffffffd1d x6 : ffff662240a94900 [ 487.433505] x5 : 0000000000000003 x4 : 0000000000000009 x3 : ffffad184f4ce008 [ 487.440632] x2 : ffff662243eec000 x1 : 0000000100000100 x0 : fffffc0000000000 [ 487.447758] Call trace: [ 487.450194] kfree+0xac/0x304 [ 487.453151] dpaa2_eth_free_tx_fd.isra.0+0x33c/0x3e0 [fsl_dpaa2_eth] [ 487.459507] dpaa2_eth_tx_conf+0x100/0x2e0 [fsl_dpaa2_eth] [ 487.464989] dpaa2_eth_poll+0xdc/0x380 [fsl_dpaa2_eth]

In the Linux kernel, the following vulnerability has been resolved: erofs: fix missing xas_retry() in fscache mode The xarray iteration only holds the RCU read lock and thus may encounter XA_RETRY_ENTRY if there's process modifying the xarray concurrently. This will cause oops when referring to the invalid entry. Fix this by adding the missing xas_retry(), which will make the iteration wind back to the root node if XA_RETRY_ENTRY is encountered.

In the Linux kernel, the following vulnerability has been resolved: x86/fpu: KVM: Set the base guest FPU uABI size to sizeof(struct kvm_xsave) Set the starting uABI size of KVM's guest FPU to 'struct kvm_xsave', i.e. to KVM's historical uABI size. When saving FPU state for usersapce, KVM (well, now the FPU) sets the FP+SSE bits in the XSAVE header even if the host doesn't support XSAVE. Setting the XSAVE header allows the VM to be migrated to a host that does support XSAVE without the new host having to handle FPU state that may or may not be compatible with XSAVE. Setting the uABI size to the host's default size results in out-of-bounds writes (setting the FP+SSE bits) and data corruption (that is thankfully caught by KASAN) when running on hosts without XSAVE, e.g. on Core2 CPUs. WARN if the default size is larger than KVM's historical uABI size; all features that can push the FPU size beyond the historical size must be opt-in. ================================================================== BUG: KASAN: slab-out-of-bounds in fpu_copy_uabi_to_guest_fpstate+0x86/0x130 Read of size 8 at addr ffff888011e33a00 by task qemu-build/681 CPU: 1 PID: 681 Comm: qemu-build Not tainted 5.18.0-rc5-KASAN-amd64 #1 Hardware name: /DG35EC, BIOS ECG3510M.86A.0118.2010.0113.1426 01/13/2010 Call Trace: <TASK> dump_stack_lvl+0x34/0x45 print_report.cold+0x45/0x575 kasan_report+0x9b/0xd0 fpu_copy_uabi_to_guest_fpstate+0x86/0x130 kvm_arch_vcpu_ioctl+0x72a/0x1c50 [kvm] kvm_vcpu_ioctl+0x47f/0x7b0 [kvm] __x64_sys_ioctl+0x5de/0xc90 do_syscall_64+0x31/0x50 entry_SYSCALL_64_after_hwframe+0x44/0xae </TASK> Allocated by task 0: (stack is not available) The buggy address belongs to the object at ffff888011e33800 which belongs to the cache kmalloc-512 of size 512 The buggy address is located 0 bytes to the right of 512-byte region [ffff888011e33800, ffff888011e33a00) The buggy address belongs to the physical page: page:0000000089cd4adb refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x11e30 head:0000000089cd4adb order:2 compound_mapcount:0 compound_pincount:0 flags: 0x4000000000010200(slab|head|zone=1) raw: 4000000000010200 dead000000000100 dead000000000122 ffff888001041c80 raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888011e33900: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff888011e33980: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff888011e33a00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff888011e33a80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff888011e33b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ================================================================== Disabling lock debugging due to kernel taint

In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix locking in rxrpc's sendmsg Fix three bugs in the rxrpc's sendmsg implementation: (1) rxrpc_new_client_call() should release the socket lock when returning an error from rxrpc_get_call_slot(). (2) rxrpc_wait_for_tx_window_intr() will return without the call mutex held in the event that we're interrupted by a signal whilst waiting for tx space on the socket or relocking the call mutex afterwards. Fix this by: (a) moving the unlock/lock of the call mutex up to rxrpc_send_data() such that the lock is not held around all of rxrpc_wait_for_tx_window*() and (b) indicating to higher callers whether we're return with the lock dropped. Note that this means recvmsg() will not block on this call whilst we're waiting. (3) After dropping and regaining the call mutex, rxrpc_send_data() needs to go and recheck the state of the tx_pending buffer and the tx_total_len check in case we raced with another sendmsg() on the same call. Thinking on this some more, it might make sense to have different locks for sendmsg() and recvmsg(). There's probably no need to make recvmsg() wait for sendmsg(). It does mean that recvmsg() can return MSG_EOR indicating that a call is dead before a sendmsg() to that call returns - but that can currently happen anyway. Without fix (2), something like the following can be induced: WARNING: bad unlock balance detected! 5.16.0-rc6-syzkaller #0 Not tainted ------------------------------------- syz-executor011/3597 is trying to release lock (&call->user_mutex) at: [<ffffffff885163a3>] rxrpc_do_sendmsg+0xc13/0x1350 net/rxrpc/sendmsg.c:748 but there are no more locks to release! other info that might help us debug this: no locks held by syz-executor011/3597. ... Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_unlock_imbalance_bug include/trace/events/lock.h:58 [inline] __lock_release kernel/locking/lockdep.c:5306 [inline] lock_release.cold+0x49/0x4e kernel/locking/lockdep.c:5657 __mutex_unlock_slowpath+0x99/0x5e0 kernel/locking/mutex.c:900 rxrpc_do_sendmsg+0xc13/0x1350 net/rxrpc/sendmsg.c:748 rxrpc_sendmsg+0x420/0x630 net/rxrpc/af_rxrpc.c:561 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:724 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2409 ___sys_sendmsg+0xf3/0x170 net/socket.c:2463 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2492 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae [Thanks to Hawkins Jiawei and Khalid Masum for their attempts to fix this]

In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate command request size In commit 2b9b8f3b68ed ("ksmbd: validate command payload size"), except for SMB2_OPLOCK_BREAK_HE command, the request size of other commands is not checked, it's not expected. Fix it by add check for request size of other commands.

In the Linux kernel, the following vulnerability has been resolved: HID: hidraw: fix memory leak in hidraw_release() Free the buffered reports before deleting the list entry. BUG: memory leak unreferenced object 0xffff88810e72f180 (size 32): comm "softirq", pid 0, jiffies 4294945143 (age 16.080s) hex dump (first 32 bytes): 64 f3 c6 6a d1 88 07 04 00 00 00 00 00 00 00 00 d..j............ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff814ac6c3>] kmemdup+0x23/0x50 mm/util.c:128 [<ffffffff8357c1d2>] kmemdup include/linux/fortify-string.h:440 [inline] [<ffffffff8357c1d2>] hidraw_report_event+0xa2/0x150 drivers/hid/hidraw.c:521 [<ffffffff8356ddad>] hid_report_raw_event+0x27d/0x740 drivers/hid/hid-core.c:1992 [<ffffffff8356e41e>] hid_input_report+0x1ae/0x270 drivers/hid/hid-core.c:2065 [<ffffffff835f0d3f>] hid_irq_in+0x1ff/0x250 drivers/hid/usbhid/hid-core.c:284 [<ffffffff82d3c7f9>] __usb_hcd_giveback_urb+0xf9/0x230 drivers/usb/core/hcd.c:1670 [<ffffffff82d3cc26>] usb_hcd_giveback_urb+0x1b6/0x1d0 drivers/usb/core/hcd.c:1747 [<ffffffff82ef1e14>] dummy_timer+0x8e4/0x14c0 drivers/usb/gadget/udc/dummy_hcd.c:1988 [<ffffffff812f50a8>] call_timer_fn+0x38/0x200 kernel/time/timer.c:1474 [<ffffffff812f5586>] expire_timers kernel/time/timer.c:1519 [inline] [<ffffffff812f5586>] __run_timers.part.0+0x316/0x430 kernel/time/timer.c:1790 [<ffffffff812f56e4>] __run_timers kernel/time/timer.c:1768 [inline] [<ffffffff812f56e4>] run_timer_softirq+0x44/0x90 kernel/time/timer.c:1803 [<ffffffff848000e6>] __do_softirq+0xe6/0x2ea kernel/softirq.c:571 [<ffffffff81246db0>] invoke_softirq kernel/softirq.c:445 [inline] [<ffffffff81246db0>] __irq_exit_rcu kernel/softirq.c:650 [inline] [<ffffffff81246db0>] irq_exit_rcu+0xc0/0x110 kernel/softirq.c:662 [<ffffffff84574f02>] sysvec_apic_timer_interrupt+0xa2/0xd0 arch/x86/kernel/apic/apic.c:1106 [<ffffffff84600c8b>] asm_sysvec_apic_timer_interrupt+0x1b/0x20 arch/x86/include/asm/idtentry.h:649 [<ffffffff8458a070>] native_safe_halt arch/x86/include/asm/irqflags.h:51 [inline] [<ffffffff8458a070>] arch_safe_halt arch/x86/include/asm/irqflags.h:89 [inline] [<ffffffff8458a070>] acpi_safe_halt drivers/acpi/processor_idle.c:111 [inline] [<ffffffff8458a070>] acpi_idle_do_entry+0xc0/0xd0 drivers/acpi/processor_idle.c:554

In the Linux kernel, the following vulnerability has been resolved: ARM: exynos: Fix refcount leak in exynos_map_pmu of_find_matching_node() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. of_node_put() checks null pointer.

In the Linux kernel, the following vulnerability has been resolved: soundwire: stream: fix memory leak in stream config error path When stream config is failed, master runtime will release all slave runtime in the slave_rt_list, but slave runtime is not added to the list at this time. This patch frees slave runtime in the config error path to fix the memory leak.