In the Linux kernel, the following vulnerability has been resolved: bpf: Prevent bpf program recursion for raw tracepoint probes We got report from sysbot [1] about warnings that were caused by bpf program attached to contention_begin raw tracepoint triggering the same tracepoint by using bpf_trace_printk helper that takes trace_printk_lock lock. Call Trace: <TASK> ? trace_event_raw_event_bpf_trace_printk+0x5f/0x90 bpf_trace_printk+0x2b/0xe0 bpf_prog_a9aec6167c091eef_prog+0x1f/0x24 bpf_trace_run2+0x26/0x90 native_queued_spin_lock_slowpath+0x1c6/0x2b0 _raw_spin_lock_irqsave+0x44/0x50 bpf_trace_printk+0x3f/0xe0 bpf_prog_a9aec6167c091eef_prog+0x1f/0x24 bpf_trace_run2+0x26/0x90 native_queued_spin_lock_slowpath+0x1c6/0x2b0 _raw_spin_lock_irqsave+0x44/0x50 bpf_trace_printk+0x3f/0xe0 bpf_prog_a9aec6167c091eef_prog+0x1f/0x24 bpf_trace_run2+0x26/0x90 native_queued_spin_lock_slowpath+0x1c6/0x2b0 _raw_spin_lock_irqsave+0x44/0x50 bpf_trace_printk+0x3f/0xe0 bpf_prog_a9aec6167c091eef_prog+0x1f/0x24 bpf_trace_run2+0x26/0x90 native_queued_spin_lock_slowpath+0x1c6/0x2b0 _raw_spin_lock_irqsave+0x44/0x50 __unfreeze_partials+0x5b/0x160 ... The can be reproduced by attaching bpf program as raw tracepoint on contention_begin tracepoint. The bpf prog calls bpf_trace_printk helper. Then by running perf bench the spin lock code is forced to take slow path and call contention_begin tracepoint. Fixing this by skipping execution of the bpf program if it's already running, Using bpf prog 'active' field, which is being currently used by trampoline programs for the same reason. Moving bpf_prog_inc_misses_counter to syscall.c because trampoline.c is compiled in just for CONFIG_BPF_JIT option. [1] https://lore.kernel.org/bpf/YxhFe3EwqchC%2FfYf@krava/T/#t

In the Linux kernel, the following vulnerability has been resolved: 9p: trans_fd/p9_conn_cancel: drop client lock earlier syzbot reported a double-lock here and we no longer need this lock after requests have been moved off to local list: just drop the lock earlier.

In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Avoid CPU lockups due fifo occupancy check loop Driver waits indefinitely for the fifo occupancy to go below a threshold as soon as the pacing interrupt is received. This can cause soft lockup on one of the processors, if the rate of DB is very high. Add a loop count for FPGA and exit the __wait_for_fifo_occupancy_below_th if the loop is taking more time. Pacing will be continuing until the occupancy is below the threshold. This is ensured by the checks in bnxt_re_pacing_timer_exp and further scheduling the work for pacing based on the fifo occupancy.

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix anon_dev leak in create_subvol() When btrfs_qgroup_inherit(), btrfs_alloc_tree_block, or btrfs_insert_root() fail in create_subvol(), we return without freeing anon_dev. Reorganize the error handling in create_subvol() to fix this.

In the Linux kernel, the following vulnerability has been resolved: bootmem: remove the vmemmap pages from kmemleak in put_page_bootmem The vmemmap pages is marked by kmemleak when allocated from memblock. Remove it from kmemleak when freeing the page. Otherwise, when we reuse the page, kmemleak may report such an error and then stop working. kmemleak: Cannot insert 0xffff98fb6eab3d40 into the object search tree (overlaps existing) kmemleak: Kernel memory leak detector disabled kmemleak: Object 0xffff98fb6be00000 (size 335544320): kmemleak: comm "swapper", pid 0, jiffies 4294892296 kmemleak: min_count = 0 kmemleak: count = 0 kmemleak: flags = 0x1 kmemleak: checksum = 0 kmemleak: backtrace:

In the Linux kernel, the following vulnerability has been resolved: net: dsa: Fix possible memory leaks in dsa_loop_init() kmemleak reported memory leaks in dsa_loop_init(): kmemleak: 12 new suspected memory leaks unreferenced object 0xffff8880138ce000 (size 2048): comm "modprobe", pid 390, jiffies 4295040478 (age 238.976s) backtrace: [<000000006a94f1d5>] kmalloc_trace+0x26/0x60 [<00000000a9c44622>] phy_device_create+0x5d/0x970 [<00000000d0ee2afc>] get_phy_device+0xf3/0x2b0 [<00000000dca0c71f>] __fixed_phy_register.part.0+0x92/0x4e0 [<000000008a834798>] fixed_phy_register+0x84/0xb0 [<0000000055223fcb>] dsa_loop_init+0xa9/0x116 [dsa_loop] ... There are two reasons for memleak in dsa_loop_init(). First, fixed_phy_register() create and register phy_device: fixed_phy_register() get_phy_device() phy_device_create() # freed by phy_device_free() phy_device_register() # freed by phy_device_remove() But fixed_phy_unregister() only calls phy_device_remove(). So the memory allocated in phy_device_create() is leaked. Second, when mdio_driver_register() fail in dsa_loop_init(), it just returns and there is no cleanup for phydevs. Fix the problems by catching the error of mdio_driver_register() in dsa_loop_init(), then calling both fixed_phy_unregister() and phy_device_free() to release phydevs. Also add a function for phydevs cleanup to avoid duplacate.

In the Linux kernel, the following vulnerability has been resolved: drm/msm/dp: fix bridge lifetime Device-managed resources allocated post component bind must be tied to the lifetime of the aggregate DRM device or they will not necessarily be released when binding of the aggregate device is deferred. This can lead resource leaks or failure to bind the aggregate device when binding is later retried and a second attempt to allocate the resources is made. For the DP bridges, previously allocated bridges will leak on probe deferral. Fix this by amending the DP parser interface and tying the lifetime of the bridge device to the DRM device rather than DP platform device. Patchwork: https://patchwork.freedesktop.org/patch/502667/

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Use 64 bit variable to avoid 32 bit overflow For example, in the expression: vbo = 2 * vbo + skip

In the Linux kernel, the following vulnerability has been resolved: drm/meson: Fix refcount leak in meson_encoder_hdmi_init of_find_device_by_node() takes reference, we should use put_device() to release it when not need anymore. Add missing put_device() in error path to avoid refcount leak.

In the Linux kernel, the following vulnerability has been resolved: drm/vkms: Fix memory leak in vkms_init() A memory leak was reported after the vkms module install failed. unreferenced object 0xffff88810bc28520 (size 16): comm "modprobe", pid 9662, jiffies 4298009455 (age 42.590s) hex dump (first 16 bytes): 01 01 00 64 81 88 ff ff 00 00 dc 0a 81 88 ff ff ...d............ backtrace: [<00000000e7561ff8>] kmalloc_trace+0x27/0x60 [<000000000b1954a0>] 0xffffffffc45200a9 [<00000000abbf1da0>] do_one_initcall+0xd0/0x4f0 [<000000001505ee87>] do_init_module+0x1a4/0x680 [<00000000958079ad>] load_module+0x6249/0x7110 [<00000000117e4696>] __do_sys_finit_module+0x140/0x200 [<00000000f74b12d2>] do_syscall_64+0x35/0x80 [<000000008fc6fcde>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 The reason is that the vkms_init() returns without checking the return value of vkms_create(), and if the vkms_create() failed, the config allocated at the beginning of vkms_init() is leaked. vkms_init() config = kmalloc(...) # config allocated ... return vkms_create() # vkms_create failed and config is leaked Fix this problem by checking return value of vkms_create() and free the config if error happened.

In the Linux kernel, the following vulnerability has been resolved: fbdev: efifb: Register sysfs groups through driver core The driver core can register and cleanup sysfs groups already. Make use of that functionality to simplify the error handling and cleanup. Also avoid a UAF race during unregistering where the sysctl attributes were usable after the info struct was freed.

In the Linux kernel, the following vulnerability has been resolved: memstick/ms_block: Fix a memory leak 'erased_blocks_bitmap' is never freed. As it is allocated at the same time as 'used_blocks_bitmap', it is likely that it should be freed also at the same time. Add the corresponding bitmap_free() in msb_data_clear().

In the Linux kernel, the following vulnerability has been resolved: cifs: Fix memory leak when using fscache If we hit the 'index == next_cached' case, we leak a refcount on the struct page. Fix this by using readahead_folio() which takes care of the refcount for you.

In the Linux kernel, the following vulnerability has been resolved: cpufreq: CPPC: Add u64 casts to avoid overflowing The fields of the _CPC object are unsigned 32-bits values. To avoid overflows while using _CPC's values, add 'u64' casts.

In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: avoid corrupting page->mapping in hugetlb_mcopy_atomic_pte In MCOPY_ATOMIC_CONTINUE case with a non-shared VMA, pages in the page cache are installed in the ptes. But hugepage_add_new_anon_rmap is called for them mistakenly because they're not vm_shared. This will corrupt the page->mapping used by page cache code.

In the Linux kernel, the following vulnerability has been resolved: watchdog: rzg2l_wdt: Fix 32bit overflow issue The value of timer_cycle_us can be 0 due to 32bit overflow. For eg:- If we assign the counter value "0xfff" for computing maxval. This patch fixes this issue by appending ULL to 1024, so that it is promoted to 64bit. This patch also fixes the warning message, 'watchdog: Invalid min and max timeout values, resetting to 0!'.

In the Linux kernel, the following vulnerability has been resolved: ceph: remove the incorrect Fw reference check when dirtying pages When doing the direct-io reads it will also try to mark pages dirty, but for the read path it won't hold the Fw caps and there is case will it get the Fw reference.

In the Linux kernel, the following vulnerability has been resolved: nfc: fdp: Fix potential memory leak in fdp_nci_send() fdp_nci_send() will call fdp_nci_i2c_write that will not free skb in the function. As a result, when fdp_nci_i2c_write() finished, the skb will memleak. fdp_nci_send() should free skb after fdp_nci_i2c_write() finished.

In the Linux kernel, the following vulnerability has been resolved: static_call: Handle module init failure correctly in static_call_del_module() Module insertion invokes static_call_add_module() to initialize the static calls in a module. static_call_add_module() invokes __static_call_init(), which allocates a struct static_call_mod to either encapsulate the built-in static call sites of the associated key into it so further modules can be added or to append the module to the module chain. If that allocation fails the function returns with an error code and the module core invokes static_call_del_module() to clean up eventually added static_call_mod entries. This works correctly, when all keys used by the module were converted over to a module chain before the failure. If not then static_call_del_module() causes a #GP as it blindly assumes that key::mods points to a valid struct static_call_mod. The problem is that key::mods is not a individual struct member of struct static_call_key, it's part of a union to save space: union { /* bit 0: 0 = mods, 1 = sites */ unsigned long type; struct static_call_mod *mods; struct static_call_site *sites; }; key::sites is a pointer to the list of built-in usage sites of the static call. The type of the pointer is differentiated by bit 0. A mods pointer has the bit clear, the sites pointer has the bit set. As static_call_del_module() blidly assumes that the pointer is a valid static_call_mod type, it fails to check for this failure case and dereferences the pointer to the list of built-in call sites, which is obviously bogus. Cure it by checking whether the key has a sites or a mods pointer. If it's a sites pointer then the key is not to be touched. As the sites are walked in the same order as in __static_call_init() the site walk can be terminated because all subsequent sites have not been touched by the init code due to the error exit. If it was converted before the allocation fail, then the inner loop which searches for a module match will find nothing. A fail in the second allocation in __static_call_init() is harmless and does not require special treatment. The first allocation succeeded and converted the key to a module chain. That first entry has mod::mod == NULL and mod::next == NULL, so the inner loop of static_call_del_module() will neither find a module match nor a module chain. The next site in the walk was either already converted, but can't match the module, or it will exit the outer loop because it has a static_call_site pointer and not a static_call_mod pointer.

In the Linux kernel, the following vulnerability has been resolved: Input: i8042 - fix leaking of platform device on module removal Avoid resetting the module-wide i8042_platform_device pointer in i8042_probe() or i8042_remove(), so that the device can be properly destroyed by i8042_exit() on module unload.

In the Linux kernel, the following vulnerability has been resolved: Input: iforce - invert valid length check when fetching device IDs syzbot is reporting uninitialized value at iforce_init_device() [1], for commit 6ac0aec6b0a6 ("Input: iforce - allow callers supply data buffer when fetching device IDs") is checking that valid length is shorter than bytes to read. Since iforce_get_id_packet() stores valid length when returning 0, the caller needs to check that valid length is longer than or equals to bytes to read.

In the Linux kernel, the following vulnerability has been resolved: eth: sungem: remove .ndo_poll_controller to avoid deadlocks Erhard reports netpoll warnings from sungem: netpoll_send_skb_on_dev(): eth0 enabled interrupts in poll (gem_start_xmit+0x0/0x398) WARNING: CPU: 1 PID: 1 at net/core/netpoll.c:370 netpoll_send_skb+0x1fc/0x20c gem_poll_controller() disables interrupts, which may sleep. We can't sleep in netpoll, it has interrupts disabled completely. Strangely, gem_poll_controller() doesn't even poll the completions, and instead acts as if an interrupt has fired so it just schedules NAPI and exits. None of this has been necessary for years, since netpoll invokes NAPI directly.

In the Linux kernel, the following vulnerability has been resolved: regulator: of: Fix refcount leak bug in of_get_regulation_constraints() We should call the of_node_put() for the reference returned by of_get_child_by_name() which has increased the refcount.

In the Linux kernel, the following vulnerability has been resolved: ipv6: sr: fix memleak in seg6_hmac_init_algo seg6_hmac_init_algo returns without cleaning up the previous allocations if one fails, so it's going to leak all that memory and the crypto tfms. Update seg6_hmac_exit to only free the memory when allocated, so we can reuse the code directly.

In the Linux kernel, the following vulnerability has been resolved: ax25: Fix reference count leak issue of net_device There is a reference count leak issue of the object "net_device" in ax25_dev_device_down(). When the ax25 device is shutting down, the ax25_dev_device_down() drops the reference count of net_device one or zero times depending on if we goto unlock_put or not, which will cause memory leak. In order to solve the above issue, decrease the reference count of net_device after dev->ax25_ptr is set to null.

In the Linux kernel, the following vulnerability has been resolved: f2fs: multidev: fix to recognize valid zero block address As reported by Yi Zhang in mailing list [1], kernel warning was catched during zbd/010 test as below: ./check zbd/010 zbd/010 (test gap zone support with F2FS) [failed] runtime ... 3.752s something found in dmesg: [ 4378.146781] run blktests zbd/010 at 2024-02-18 11:31:13 [ 4378.192349] null_blk: module loaded [ 4378.209860] null_blk: disk nullb0 created [ 4378.413285] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 4378.422334] scsi host15: scsi_debug: version 0191 [20210520] dev_size_mb=1024, opts=0x0, submit_queues=1, statistics=0 [ 4378.434922] scsi 15:0:0:0: Direct-Access-ZBC Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 4378.443343] scsi 15:0:0:0: Power-on or device reset occurred [ 4378.449371] sd 15:0:0:0: Attached scsi generic sg5 type 20 [ 4378.449418] sd 15:0:0:0: [sdf] Host-managed zoned block device ... (See '/mnt/tests/gitlab.com/api/v4/projects/19168116/repository/archive.zip/storage/blktests/blk/blktests/results/nodev/zbd/010.dmesg' WARNING: CPU: 22 PID: 44011 at fs/iomap/iter.c:51 CPU: 22 PID: 44011 Comm: fio Not tainted 6.8.0-rc3+ #1 RIP: 0010:iomap_iter+0x32b/0x350 Call Trace: <TASK> __iomap_dio_rw+0x1df/0x830 f2fs_file_read_iter+0x156/0x3d0 [f2fs] aio_read+0x138/0x210 io_submit_one+0x188/0x8c0 __x64_sys_io_submit+0x8c/0x1a0 do_syscall_64+0x86/0x170 entry_SYSCALL_64_after_hwframe+0x6e/0x76 Shinichiro Kawasaki helps to analyse this issue and proposes a potential fixing patch in [2]. Quoted from reply of Shinichiro Kawasaki: "I confirmed that the trigger commit is dbf8e63f48af as Yi reported. I took a look in the commit, but it looks fine to me. So I thought the cause is not in the commit diff. I found the WARN is printed when the f2fs is set up with multiple devices, and read requests are mapped to the very first block of the second device in the direct read path. In this case, f2fs_map_blocks() and f2fs_map_blocks_cached() modify map->m_pblk as the physical block address from each block device. It becomes zero when it is mapped to the first block of the device. However, f2fs_iomap_begin() assumes that map->m_pblk is the physical block address of the whole f2fs, across the all block devices. It compares map->m_pblk against NULL_ADDR == 0, then go into the unexpected branch and sets the invalid iomap->length. The WARN catches the invalid iomap->length. This WARN is printed even for non-zoned block devices, by following steps. - Create two (non-zoned) null_blk devices memory backed with 128MB size each: nullb0 and nullb1. # mkfs.f2fs /dev/nullb0 -c /dev/nullb1 # mount -t f2fs /dev/nullb0 "${mount_dir}" # dd if=/dev/zero of="${mount_dir}/test.dat" bs=1M count=192 # dd if="${mount_dir}/test.dat" of=/dev/null bs=1M count=192 iflag=direct ..." So, the root cause of this issue is: when multi-devices feature is on, f2fs_map_blocks() may return zero blkaddr in non-primary device, which is a verified valid block address, however, f2fs_iomap_begin() treats it as an invalid block address, and then it triggers the warning in iomap framework code. Finally, as discussed, we decide to use a more simple and direct way that checking (map.m_flags & F2FS_MAP_MAPPED) condition instead of (map.m_pblk != NULL_ADDR) to fix this issue. Thanks a lot for the effort of Yi Zhang and Shinichiro Kawasaki on this issue. [1] https://lore.kernel.org/linux-f2fs-devel/CAHj4cs-kfojYC9i0G73PRkYzcxCTex=-vugRFeP40g_URGvnfQ@mail.gmail.com/ [2] https://lore.kernel.org/linux-f2fs-devel/gngdj77k4picagsfdtiaa7gpgnup6fsgwzsltx6milmhegmjff@iax2n4wvrqye/

In the Linux kernel, the following vulnerability has been resolved: ext2: Add more validity checks for inode counts Add checks verifying number of inodes stored in the superblock matches the number computed from number of inodes per group. Also verify we have at least one block worth of inodes per group. This prevents crashes on corrupted filesystems.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: eir: Fix using strlen with hdev->{dev_name,short_name} Both dev_name and short_name are not guaranteed to be NULL terminated so this instead use strnlen and then attempt to determine if the resulting string needs to be truncated or not.

In the Linux kernel, the following vulnerability has been resolved: i2c: imx: fix reference leak when pm_runtime_get_sync fails In i2c_imx_xfer() and i2c_imx_remove(), the pm reference count is not expected to be incremented on return. However, pm_runtime_get_sync will increment pm reference count even failed. Forgetting to putting operation will result in a reference leak here. Replace it with pm_runtime_resume_and_get to keep usage counter balanced.

In the Linux kernel, the following vulnerability has been resolved: vsock: Update rx_bytes on read_skb() Make sure virtio_transport_inc_rx_pkt() and virtio_transport_dec_rx_pkt() calls are balanced (i.e. virtio_vsock_sock::rx_bytes doesn't lie) after vsock_transport::read_skb(). While here, also inform the peer that we've freed up space and it has more credit. Failing to update rx_bytes after packet is dequeued leads to a warning on SOCK_STREAM recv(): [ 233.396654] rx_queue is empty, but rx_bytes is non-zero [ 233.396702] WARNING: CPU: 11 PID: 40601 at net/vmw_vsock/virtio_transport_common.c:589

In the Linux kernel, the following vulnerability has been resolved: ext4: fix delayed allocation bug in ext4_clu_mapped for bigalloc + inline When converting files with inline data to extents, delayed allocations made on a file system created with both the bigalloc and inline options can result in invalid extent status cache content, incorrect reserved cluster counts, kernel memory leaks, and potential kernel panics. With bigalloc, the code that determines whether a block must be delayed allocated searches the extent tree to see if that block maps to a previously allocated cluster. If not, the block is delayed allocated, and otherwise, it isn't. However, if the inline option is also used, and if the file containing the block is marked as able to store data inline, there isn't a valid extent tree associated with the file. The current code in ext4_clu_mapped() calls ext4_find_extent() to search the non-existent tree for a previously allocated cluster anyway, which typically finds nothing, as desired. However, a side effect of the search can be to cache invalid content from the non-existent tree (garbage) in the extent status tree, including bogus entries in the pending reservation tree. To fix this, avoid searching the extent tree when allocating blocks for bigalloc + inline files that are being converted from inline to extent mapped.

In the Linux kernel, the following vulnerability has been resolved: net/9p: fix uninit-value in p9_client_rpc() Syzbot with the help of KMSAN reported the following error: BUG: KMSAN: uninit-value in trace_9p_client_res include/trace/events/9p.h:146 [inline] BUG: KMSAN: uninit-value in p9_client_rpc+0x1314/0x1340 net/9p/client.c:754 trace_9p_client_res include/trace/events/9p.h:146 [inline] p9_client_rpc+0x1314/0x1340 net/9p/client.c:754 p9_client_create+0x1551/0x1ff0 net/9p/client.c:1031 v9fs_session_init+0x1b9/0x28e0 fs/9p/v9fs.c:410 v9fs_mount+0xe2/0x12b0 fs/9p/vfs_super.c:122 legacy_get_tree+0x114/0x290 fs/fs_context.c:662 vfs_get_tree+0xa7/0x570 fs/super.c:1797 do_new_mount+0x71f/0x15e0 fs/namespace.c:3352 path_mount+0x742/0x1f20 fs/namespace.c:3679 do_mount fs/namespace.c:3692 [inline] __do_sys_mount fs/namespace.c:3898 [inline] __se_sys_mount+0x725/0x810 fs/namespace.c:3875 __x64_sys_mount+0xe4/0x150 fs/namespace.c:3875 do_syscall_64+0xd5/0x1f0 entry_SYSCALL_64_after_hwframe+0x6d/0x75 Uninit was created at: __alloc_pages+0x9d6/0xe70 mm/page_alloc.c:4598 __alloc_pages_node include/linux/gfp.h:238 [inline] alloc_pages_node include/linux/gfp.h:261 [inline] alloc_slab_page mm/slub.c:2175 [inline] allocate_slab mm/slub.c:2338 [inline] new_slab+0x2de/0x1400 mm/slub.c:2391 ___slab_alloc+0x1184/0x33d0 mm/slub.c:3525 __slab_alloc mm/slub.c:3610 [inline] __slab_alloc_node mm/slub.c:3663 [inline] slab_alloc_node mm/slub.c:3835 [inline] kmem_cache_alloc+0x6d3/0xbe0 mm/slub.c:3852 p9_tag_alloc net/9p/client.c:278 [inline] p9_client_prepare_req+0x20a/0x1770 net/9p/client.c:641 p9_client_rpc+0x27e/0x1340 net/9p/client.c:688 p9_client_create+0x1551/0x1ff0 net/9p/client.c:1031 v9fs_session_init+0x1b9/0x28e0 fs/9p/v9fs.c:410 v9fs_mount+0xe2/0x12b0 fs/9p/vfs_super.c:122 legacy_get_tree+0x114/0x290 fs/fs_context.c:662 vfs_get_tree+0xa7/0x570 fs/super.c:1797 do_new_mount+0x71f/0x15e0 fs/namespace.c:3352 path_mount+0x742/0x1f20 fs/namespace.c:3679 do_mount fs/namespace.c:3692 [inline] __do_sys_mount fs/namespace.c:3898 [inline] __se_sys_mount+0x725/0x810 fs/namespace.c:3875 __x64_sys_mount+0xe4/0x150 fs/namespace.c:3875 do_syscall_64+0xd5/0x1f0 entry_SYSCALL_64_after_hwframe+0x6d/0x75 If p9_check_errors() fails early in p9_client_rpc(), req->rc.tag will not be properly initialized. However, trace_9p_client_res() ends up trying to print it out anyway before p9_client_rpc() finishes. Fix this issue by assigning default values to p9_fcall fields such as 'tag' and (just in case KMSAN unearths something new) 'id' during the tag allocation stage.

In the Linux kernel, the following vulnerability has been resolved: drm/meson: encoder_cvbs: Fix refcount leak in meson_encoder_cvbs_init of_graph_get_remote_node() returns remote device nodepointer with refcount incremented, we should use of_node_put() on it when done. Add missing of_node_put() to avoid refcount leak.

An issue was discovered in the Linux kernel before 5.8. lib/nlattr.c allows attackers to cause a denial of service (unbounded recursion) via a nested Netlink policy with a back reference.

In the Linux kernel, the following vulnerability has been resolved: qlcnic: prevent ->dcb use-after-free on qlcnic_dcb_enable() failure adapter->dcb would get silently freed inside qlcnic_dcb_enable() in case qlcnic_dcb_attach() would return an error, which always happens under OOM conditions. This would lead to use-after-free because both of the existing callers invoke qlcnic_dcb_get_info() on the obtained pointer, which is potentially freed at that point. Propagate errors from qlcnic_dcb_enable(), and instead free the dcb pointer at callsite using qlcnic_dcb_free(). This also removes the now unused qlcnic_clear_dcb_ops() helper, which was a simple wrapper around kfree() also causing memory leaks for partially initialized dcb. Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool.

In the Linux kernel, the following vulnerability has been resolved: clk: socfpga: Fix memory leak in socfpga_gate_init() Free @socfpga_clk and @ops on the error path to avoid memory leak issue.

In the Linux kernel, the following vulnerability has been resolved: media: meson: vdec: fix possible refcount leak in vdec_probe() v4l2_device_unregister need to be called to put the refcount got by v4l2_device_register when vdec_probe fails or vdec_remove is called.

In the Linux kernel, the following vulnerability has been resolved: iio: light: cm3605: Fix an error handling path in cm3605_probe() The commit in Fixes also introduced a new error handling path which should goto the existing error handling path. Otherwise some resources leak.

In the Linux kernel, the following vulnerability has been resolved: usb: renesas: Fix refcount leak bug In usbhs_rza1_hardware_init(), of_find_node_by_name() will return a node pointer with refcount incremented. We should use of_node_put() when it is not used anymore.

In the Linux kernel, the following vulnerability has been resolved: ARM: hisi: Add missing of_node_put after of_find_compatible_node of_find_compatible_node will increment the refcount of the returned device_node. Calling of_node_put() to avoid the refcount leak

An issue was discovered in the Linux kernel before 5.9. arch/x86/kvm/svm/sev.c allows attackers to cause a denial of service (soft lockup) by triggering destruction of a large SEV VM (which requires unregistering many encrypted regions), aka CID-7be74942f184.

In the Linux kernel, the following vulnerability has been resolved: i2c: xiic: fix reference leak when pm_runtime_get_sync fails The PM reference count is not expected to be incremented on return in xiic_xfer and xiic_i2c_remove. However, pm_runtime_get_sync will increment the PM reference count even failed. Forgetting to putting operation will result in a reference leak here. Replace it with pm_runtime_resume_and_get to keep usage counter balanced.

In the Linux kernel, the following vulnerability has been resolved: net: wwan: mhi: fix memory leak in mhi_mbim_dellink MHI driver registers network device without setting the needs_free_netdev flag, and does NOT call free_netdev() when unregisters network device, which causes a memory leak. This patch sets needs_free_netdev to true when registers network device, which makes netdev subsystem call free_netdev() automatically after unregister_netdevice().

In the Linux kernel, the following vulnerability has been resolved: ARM: meson: Fix refcount leak in meson_smp_prepare_cpus of_find_compatible_node() returns a node pointer with refcount incremented, we should use of_node_put() on it when done. Add missing of_node_put() to avoid refcount leak.

In the Linux kernel, the following vulnerability has been resolved: media: rga: fix possible memory leak in rga_probe rga->m2m_dev needs to be freed when rga_probe fails.

In the Linux kernel, the following vulnerability has been resolved: ASoC: fsl: Fix refcount leak in imx_sgtl5000_probe of_find_i2c_device_by_node() takes a reference, In error paths, we should call put_device() to drop the reference to aviod refount leak.

In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Fix the sk->sk_forward_alloc warning of sk_stream_kill_queues When running `test_sockmap` selftests, the following warning appears: WARNING: CPU: 2 PID: 197 at net/core/stream.c:205 sk_stream_kill_queues+0xd3/0xf0 Call Trace: <TASK> inet_csk_destroy_sock+0x55/0x110 tcp_rcv_state_process+0xd28/0x1380 ? tcp_v4_do_rcv+0x77/0x2c0 tcp_v4_do_rcv+0x77/0x2c0 __release_sock+0x106/0x130 __tcp_close+0x1a7/0x4e0 tcp_close+0x20/0x70 inet_release+0x3c/0x80 __sock_release+0x3a/0xb0 sock_close+0x14/0x20 __fput+0xa3/0x260 task_work_run+0x59/0xb0 exit_to_user_mode_prepare+0x1b3/0x1c0 syscall_exit_to_user_mode+0x19/0x50 do_syscall_64+0x48/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae The root case is in commit 84472b436e76 ("bpf, sockmap: Fix more uncharged while msg has more_data"), where I used msg->sg.size to replace the tosend, causing breakage: if (msg->apply_bytes && msg->apply_bytes < tosend) tosend = psock->apply_bytes;

In the Linux kernel, the following vulnerability has been resolved: drm/i915/bios: fix a memory leak in generate_lfp_data_ptrs When (size != 0 || ptrs->lvds_ entries != 3), the program tries to free() the ptrs. However, the ptrs is not created by calling kzmalloc(), but is obtained by pointer offset operation. This may lead to memory leaks or undefined behavior. Fix this by replacing the arguments of kfree() with ptrs_block. (cherry picked from commit 7674cd0b7d28b952151c3df26bbfa7e07eb2b4ec)

In the Linux kernel, the following vulnerability has been resolved: clk: qcom: ipq8074: dont disable gcc_sleep_clk_src Once the usb sleep clocks are disabled, clock framework is trying to disable the sleep clock source also. However, it seems that it cannot be disabled and trying to do so produces: [ 245.436390] ------------[ cut here ]------------ [ 245.441233] gcc_sleep_clk_src status stuck at 'on' [ 245.441254] WARNING: CPU: 2 PID: 223 at clk_branch_wait+0x130/0x140 [ 245.450435] Modules linked in: xhci_plat_hcd xhci_hcd dwc3 dwc3_qcom leds_gpio [ 245.456601] CPU: 2 PID: 223 Comm: sh Not tainted 5.18.0-rc4 #215 [ 245.463889] Hardware name: Xiaomi AX9000 (DT) [ 245.470050] pstate: 204000c5 (nzCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 245.474307] pc : clk_branch_wait+0x130/0x140 [ 245.481073] lr : clk_branch_wait+0x130/0x140 [ 245.485588] sp : ffffffc009f2bad0 [ 245.489838] x29: ffffffc009f2bad0 x28: ffffff8003e6c800 x27: 0000000000000000 [ 245.493057] x26: 0000000000000000 x25: 0000000000000000 x24: ffffff800226ef20 [ 245.500175] x23: ffffffc0089ff550 x22: 0000000000000000 x21: ffffffc008476ad0 [ 245.507294] x20: 0000000000000000 x19: ffffffc00965ac70 x18: fffffffffffc51a7 [ 245.514413] x17: 68702e3030303837 x16: 3a6d726f6674616c x15: ffffffc089f2b777 [ 245.521531] x14: ffffffc0095c9d18 x13: 0000000000000129 x12: 0000000000000129 [ 245.528649] x11: 00000000ffffffea x10: ffffffc009621d18 x9 : 0000000000000001 [ 245.535767] x8 : 0000000000000001 x7 : 0000000000017fe8 x6 : 0000000000000001 [ 245.542885] x5 : ffffff803fdca6d8 x4 : 0000000000000000 x3 : 0000000000000027 [ 245.550002] x2 : 0000000000000027 x1 : 0000000000000023 x0 : 0000000000000026 [ 245.557122] Call trace: [ 245.564229] clk_branch_wait+0x130/0x140 [ 245.566490] clk_branch2_disable+0x2c/0x40 [ 245.570656] clk_core_disable+0x60/0xb0 [ 245.574561] clk_core_disable+0x68/0xb0 [ 245.578293] clk_disable+0x30/0x50 [ 245.582113] dwc3_qcom_remove+0x60/0xc0 [dwc3_qcom] [ 245.585588] platform_remove+0x28/0x60 [ 245.590361] device_remove+0x4c/0x80 [ 245.594179] device_release_driver_internal+0x1dc/0x230 [ 245.597914] device_driver_detach+0x18/0x30 [ 245.602861] unbind_store+0xec/0x110 [ 245.607027] drv_attr_store+0x24/0x40 [ 245.610847] sysfs_kf_write+0x44/0x60 [ 245.614405] kernfs_fop_write_iter+0x128/0x1c0 [ 245.618052] new_sync_write+0xc0/0x130 [ 245.622391] vfs_write+0x1d4/0x2a0 [ 245.626123] ksys_write+0x58/0xe0 [ 245.629508] __arm64_sys_write+0x1c/0x30 [ 245.632895] invoke_syscall.constprop.0+0x5c/0x110 [ 245.636890] do_el0_svc+0xa0/0x150 [ 245.641488] el0_svc+0x18/0x60 [ 245.644872] el0t_64_sync_handler+0xa4/0x130 [ 245.647914] el0t_64_sync+0x174/0x178 [ 245.652340] ---[ end trace 0000000000000000 ]--- So, add CLK_IS_CRITICAL flag to the clock so that the kernel won't try to disable the sleep clock.

In the Linux kernel, the following vulnerability has been resolved: iio: trigger: sysfs: fix possible memory leak in iio_sysfs_trig_init() dev_set_name() allocates memory for name, it need be freed when device_add() fails, call put_device() to give up the reference that hold in device_initialize(), so that it can be freed in kobject_cleanup() when the refcount hit to 0. Fault injection test can trigger this: unreferenced object 0xffff8e8340a7b4c0 (size 32): comm "modprobe", pid 243, jiffies 4294678145 (age 48.845s) hex dump (first 32 bytes): 69 69 6f 5f 73 79 73 66 73 5f 74 72 69 67 67 65 iio_sysfs_trigge 72 00 a7 40 83 8e ff ff 00 86 13 c4 f6 ee ff ff r..@............ backtrace: [<0000000074999de8>] __kmem_cache_alloc_node+0x1e9/0x360 [<00000000497fd30b>] __kmalloc_node_track_caller+0x44/0x1a0 [<000000003636c520>] kstrdup+0x2d/0x60 [<0000000032f84da2>] kobject_set_name_vargs+0x1e/0x90 [<0000000092efe493>] dev_set_name+0x4e/0x70