In the Linux kernel, the following vulnerability has been resolved: bpf: Fix too early release of tcx_entry Pedro Pinto and later independently also Hyunwoo Kim and Wongi Lee reported an issue that the tcx_entry can be released too early leading to a use after free (UAF) when an active old-style ingress or clsact qdisc with a shared tc block is later replaced by another ingress or clsact instance. Essentially, the sequence to trigger the UAF (one example) can be as follows: 1. A network namespace is created 2. An ingress qdisc is created. This allocates a tcx_entry, and &tcx_entry->miniq is stored in the qdisc's miniqp->p_miniq. At the same time, a tcf block with index 1 is created. 3. chain0 is attached to the tcf block. chain0 must be connected to the block linked to the ingress qdisc to later reach the function tcf_chain0_head_change_cb_del() which triggers the UAF. 4. Create and graft a clsact qdisc. This causes the ingress qdisc created in step 1 to be removed, thus freeing the previously linked tcx_entry: rtnetlink_rcv_msg() => tc_modify_qdisc() => qdisc_create() => clsact_init() [a] => qdisc_graft() => qdisc_destroy() => __qdisc_destroy() => ingress_destroy() [b] => tcx_entry_free() => kfree_rcu() // tcx_entry freed 5. Finally, the network namespace is closed. This registers the cleanup_net worker, and during the process of releasing the remaining clsact qdisc, it accesses the tcx_entry that was already freed in step 4, causing the UAF to occur: cleanup_net() => ops_exit_list() => default_device_exit_batch() => unregister_netdevice_many() => unregister_netdevice_many_notify() => dev_shutdown() => qdisc_put() => clsact_destroy() [c] => tcf_block_put_ext() => tcf_chain0_head_change_cb_del() => tcf_chain_head_change_item() => clsact_chain_head_change() => mini_qdisc_pair_swap() // UAF There are also other variants, the gist is to add an ingress (or clsact) qdisc with a specific shared block, then to replace that qdisc, waiting for the tcx_entry kfree_rcu() to be executed and subsequently accessing the current active qdisc's miniq one way or another. The correct fix is to turn the miniq_active boolean into a counter. What can be observed, at step 2 above, the counter transitions from 0->1, at step [a] from 1->2 (in order for the miniq object to remain active during the replacement), then in [b] from 2->1 and finally [c] 1->0 with the eventual release. The reference counter in general ranges from [0,2] and it does not need to be atomic since all access to the counter is protected by the rtnl mutex. With this in place, there is no longer a UAF happening and the tcx_entry is freed at the correct time.

In the Linux kernel, the following vulnerability has been resolved: erofs: handle overlapped pclusters out of crafted images properly syzbot reported a task hang issue due to a deadlock case where it is waiting for the folio lock of a cached folio that will be used for cache I/Os. After looking into the crafted fuzzed image, I found it's formed with several overlapped big pclusters as below: Ext: logical offset | length : physical offset | length 0: 0.. 16384 | 16384 : 151552.. 167936 | 16384 1: 16384.. 32768 | 16384 : 155648.. 172032 | 16384 2: 32768.. 49152 | 16384 : 537223168.. 537239552 | 16384 ... Here, extent 0/1 are physically overlapped although it's entirely _impossible_ for normal filesystem images generated by mkfs. First, managed folios containing compressed data will be marked as up-to-date and then unlocked immediately (unlike in-place folios) when compressed I/Os are complete. If physical blocks are not submitted in the incremental order, there should be separate BIOs to avoid dependency issues. However, the current code mis-arranges z_erofs_fill_bio_vec() and BIO submission which causes unexpected BIO waits. Second, managed folios will be connected to their own pclusters for efficient inter-queries. However, this is somewhat hard to implement easily if overlapped big pclusters exist. Again, these only appear in fuzzed images so let's simply fall back to temporary short-lived pages for correctness. Additionally, it justifies that referenced managed folios cannot be truncated for now and reverts part of commit 2080ca1ed3e4 ("erofs: tidy up `struct z_erofs_bvec`") for simplicity although it shouldn't be any difference.

In the Linux kernel before 5.16.3, drivers/scsi/ufs/ufs-mediatek.c misinterprets the regulator_get return value (expects it to be NULL in the error case, whereas it is actually an error pointer).

In the Linux kernel, the following vulnerability has been resolved: drm/xe: Use reserved copy engine for user binds on faulting devices User binds map to engines with can fault, faults depend on user binds completion, thus we can deadlock. Avoid this by using reserved copy engine for user binds on faulting devices. While we are here, normalize bind queue creation with a helper. v2: - Pass in extensions to bind queue creation (CI) v3: - s/resevered/reserved (Lucas) - Fix NULL hwe check (Jonathan)

In the Linux kernel, the following vulnerability has been resolved: cachestat: do not flush stats in recency check syzbot detects that cachestat() is flushing stats, which can sleep, in its RCU read section (see [1]). This is done in the workingset_test_recent() step (which checks if the folio's eviction is recent). Move the stat flushing step to before the RCU read section of cachestat, and skip stat flushing during the recency check. [1]: https://lore.kernel.org/cgroups/000000000000f71227061bdf97e0@google.com/

In the Linux kernel, the following vulnerability has been resolved: KEYS: prevent NULL pointer dereference in find_asymmetric_key() In find_asymmetric_key(), if all NULLs are passed in the id_{0,1,2} arguments, the kernel will first emit WARN but then have an oops because id_2 gets dereferenced anyway. Add the missing id_2 check and move WARN_ON() to the final else branch to avoid duplicate NULL checks. Found by Linux Verification Center (linuxtesting.org) with Svace static analysis tool.

In the Linux kernel, the following vulnerability has been resolved: batman-adv: bypass empty buckets in batadv_purge_orig_ref() Many syzbot reports are pointing to soft lockups in batadv_purge_orig_ref() [1] Root cause is unknown, but we can avoid spending too much time there and perhaps get more interesting reports. [1] watchdog: BUG: soft lockup - CPU#0 stuck for 27s! [kworker/u4:6:621] Modules linked in: irq event stamp: 6182794 hardirqs last enabled at (6182793): [<ffff8000801dae10>] __local_bh_enable_ip+0x224/0x44c kernel/softirq.c:386 hardirqs last disabled at (6182794): [<ffff80008ad66a78>] __el1_irq arch/arm64/kernel/entry-common.c:533 [inline] hardirqs last disabled at (6182794): [<ffff80008ad66a78>] el1_interrupt+0x24/0x68 arch/arm64/kernel/entry-common.c:551 softirqs last enabled at (6182792): [<ffff80008aab71c4>] spin_unlock_bh include/linux/spinlock.h:396 [inline] softirqs last enabled at (6182792): [<ffff80008aab71c4>] batadv_purge_orig_ref+0x114c/0x1228 net/batman-adv/originator.c:1287 softirqs last disabled at (6182790): [<ffff80008aab61dc>] spin_lock_bh include/linux/spinlock.h:356 [inline] softirqs last disabled at (6182790): [<ffff80008aab61dc>] batadv_purge_orig_ref+0x164/0x1228 net/batman-adv/originator.c:1271 CPU: 0 PID: 621 Comm: kworker/u4:6 Not tainted 6.8.0-rc7-syzkaller-g707081b61156 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/29/2024 Workqueue: bat_events batadv_purge_orig pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : should_resched arch/arm64/include/asm/preempt.h:79 [inline] pc : __local_bh_enable_ip+0x228/0x44c kernel/softirq.c:388 lr : __local_bh_enable_ip+0x224/0x44c kernel/softirq.c:386 sp : ffff800099007970 x29: ffff800099007980 x28: 1fffe00018fce1bd x27: dfff800000000000 x26: ffff0000d2620008 x25: ffff0000c7e70de8 x24: 0000000000000001 x23: 1fffe00018e57781 x22: dfff800000000000 x21: ffff80008aab71c4 x20: ffff0001b40136c0 x19: ffff0000c72bbc08 x18: 1fffe0001a817bb0 x17: ffff800125414000 x16: ffff80008032116c x15: 0000000000000001 x14: 1fffe0001ee9d610 x13: 0000000000000000 x12: 0000000000000003 x11: 0000000000000000 x10: 0000000000ff0100 x9 : 0000000000000000 x8 : 00000000005e5789 x7 : ffff80008aab61dc x6 : 0000000000000000 x5 : 0000000000000000 x4 : 0000000000000001 x3 : 0000000000000000 x2 : 0000000000000006 x1 : 0000000000000080 x0 : ffff800125414000 Call trace: __daif_local_irq_enable arch/arm64/include/asm/irqflags.h:27 [inline] arch_local_irq_enable arch/arm64/include/asm/irqflags.h:49 [inline] __local_bh_enable_ip+0x228/0x44c kernel/softirq.c:386 __raw_spin_unlock_bh include/linux/spinlock_api_smp.h:167 [inline] _raw_spin_unlock_bh+0x3c/0x4c kernel/locking/spinlock.c:210 spin_unlock_bh include/linux/spinlock.h:396 [inline] batadv_purge_orig_ref+0x114c/0x1228 net/batman-adv/originator.c:1287 batadv_purge_orig+0x20/0x70 net/batman-adv/originator.c:1300 process_one_work+0x694/0x1204 kernel/workqueue.c:2633 process_scheduled_works kernel/workqueue.c:2706 [inline] worker_thread+0x938/0xef4 kernel/workqueue.c:2787 kthread+0x288/0x310 kernel/kthread.c:388 ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:860 Sending NMI from CPU 0 to CPUs 1: NMI backtrace for cpu 1 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.8.0-rc7-syzkaller-g707081b61156 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/29/2024 pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : arch_local_irq_enable+0x8/0xc arch/arm64/include/asm/irqflags.h:51 lr : default_idle_call+0xf8/0x128 kernel/sched/idle.c:103 sp : ffff800093a17d30 x29: ffff800093a17d30 x28: dfff800000000000 x27: 1ffff00012742fb4 x26: ffff80008ec9d000 x25: 0000000000000000 x24: 0000000000000002 x23: 1ffff00011d93a74 x22: ffff80008ec9d3a0 x21: 0000000000000000 x20: ffff0000c19dbc00 x19: ffff8000802d0fd8 x18: 1fffe00036804396 x17: ffff80008ec9d000 x16: ffff8000802d089c x15: 0000000000000001 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: block, bfq: fix possible UAF for bfqq->bic with merge chain 1) initial state, three tasks: Process 1 Process 2 Process 3 (BIC1) (BIC2) (BIC3) | Λ | Λ | Λ | | | | | | V | V | V | bfqq1 bfqq2 bfqq3 process ref: 1 1 1 2) bfqq1 merged to bfqq2: Process 1 Process 2 Process 3 (BIC1) (BIC2) (BIC3) | | | Λ \--------------\| | | V V | bfqq1--------->bfqq2 bfqq3 process ref: 0 2 1 3) bfqq2 merged to bfqq3: Process 1 Process 2 Process 3 (BIC1) (BIC2) (BIC3) here -> Λ | | \--------------\ \-------------\| V V bfqq1--------->bfqq2---------->bfqq3 process ref: 0 1 3 In this case, IO from Process 1 will get bfqq2 from BIC1 first, and then get bfqq3 through merge chain, and finially handle IO by bfqq3. Howerver, current code will think bfqq2 is owned by BIC1, like initial state, and set bfqq2->bic to BIC1. bfq_insert_request -> by Process 1 bfqq = bfq_init_rq(rq) bfqq = bfq_get_bfqq_handle_split bfqq = bic_to_bfqq -> get bfqq2 from BIC1 bfqq->ref++ rq->elv.priv[0] = bic rq->elv.priv[1] = bfqq if (bfqq_process_refs(bfqq) == 1) bfqq->bic = bic -> record BIC1 to bfqq2 __bfq_insert_request new_bfqq = bfq_setup_cooperator -> get bfqq3 from bfqq2->new_bfqq bfqq_request_freed(bfqq) new_bfqq->ref++ rq->elv.priv[1] = new_bfqq -> handle IO by bfqq3 Fix the problem by checking bfqq is from merge chain fist. And this might fix a following problem reported by our syzkaller(unreproducible): ================================================================== BUG: KASAN: slab-use-after-free in bfq_do_early_stable_merge block/bfq-iosched.c:5692 [inline] BUG: KASAN: slab-use-after-free in bfq_do_or_sched_stable_merge block/bfq-iosched.c:5805 [inline] BUG: KASAN: slab-use-after-free in bfq_get_queue+0x25b0/0x2610 block/bfq-iosched.c:5889 Write of size 1 at addr ffff888123839eb8 by task kworker/0:1H/18595 CPU: 0 PID: 18595 Comm: kworker/0:1H Tainted: G L 6.6.0-07439-gba2303cacfda #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 Workqueue: kblockd blk_mq_requeue_work Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x91/0xf0 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:364 [inline] print_report+0x10d/0x610 mm/kasan/report.c:475 kasan_report+0x8e/0xc0 mm/kasan/report.c:588 bfq_do_early_stable_merge block/bfq-iosched.c:5692 [inline] bfq_do_or_sched_stable_merge block/bfq-iosched.c:5805 [inline] bfq_get_queue+0x25b0/0x2610 block/bfq-iosched.c:5889 bfq_get_bfqq_handle_split+0x169/0x5d0 block/bfq-iosched.c:6757 bfq_init_rq block/bfq-iosched.c:6876 [inline] bfq_insert_request block/bfq-iosched.c:6254 [inline] bfq_insert_requests+0x1112/0x5cf0 block/bfq-iosched.c:6304 blk_mq_insert_request+0x290/0x8d0 block/blk-mq.c:2593 blk_mq_requeue_work+0x6bc/0xa70 block/blk-mq.c:1502 process_one_work kernel/workqueue.c:2627 [inline] process_scheduled_works+0x432/0x13f0 kernel/workqueue.c:2700 worker_thread+0x6f2/0x1160 kernel/workqueue.c:2781 kthread+0x33c/0x440 kernel/kthread.c:388 ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:305 </TASK> Allocated by task 20776: kasan_save_stack+0x20/0x40 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 __kasan_slab_alloc+0x87/0x90 mm/kasan/common.c:328 kasan_slab_alloc include/linux/kasan.h:188 [inline] slab_post_alloc_hook mm/slab.h:763 [inline] slab_alloc_node mm/slub.c:3458 [inline] kmem_cache_alloc_node+0x1a4/0x6f0 mm/slub.c:3503 ioc_create_icq block/blk-ioc.c:370 [inline] ---truncated---

In the Linux kernel, the following vulnerability has been resolved: stackdepot: fix stack_depot_save_flags() in NMI context Per documentation, stack_depot_save_flags() was meant to be usable from NMI context if STACK_DEPOT_FLAG_CAN_ALLOC is unset. However, it still would try to take the pool_lock in an attempt to save a stack trace in the current pool (if space is available). This could result in deadlock if an NMI is handled while pool_lock is already held. To avoid deadlock, only try to take the lock in NMI context and give up if unsuccessful. The documentation is fixed to clearly convey this.

In the Linux kernel, the following vulnerability has been resolved: tcp: check skb is non-NULL in tcp_rto_delta_us() We have some machines running stock Ubuntu 20.04.6 which is their 5.4.0-174-generic kernel that are running ceph and recently hit a null ptr dereference in tcp_rearm_rto(). Initially hitting it from the TLP path, but then later we also saw it getting hit from the RACK case as well. Here are examples of the oops messages we saw in each of those cases: Jul 26 15:05:02 rx [11061395.780353] BUG: kernel NULL pointer dereference, address: 0000000000000020 Jul 26 15:05:02 rx [11061395.787572] #PF: supervisor read access in kernel mode Jul 26 15:05:02 rx [11061395.792971] #PF: error_code(0x0000) - not-present page Jul 26 15:05:02 rx [11061395.798362] PGD 0 P4D 0 Jul 26 15:05:02 rx [11061395.801164] Oops: 0000 [#1] SMP NOPTI Jul 26 15:05:02 rx [11061395.805091] CPU: 0 PID: 9180 Comm: msgr-worker-1 Tainted: G W 5.4.0-174-generic #193-Ubuntu Jul 26 15:05:02 rx [11061395.814996] Hardware name: Supermicro SMC 2x26 os-gen8 64C NVME-Y 256G/H12SSW-NTR, BIOS 2.5.V1.2U.NVMe.UEFI 05/09/2023 Jul 26 15:05:02 rx [11061395.825952] RIP: 0010:tcp_rearm_rto+0xe4/0x160 Jul 26 15:05:02 rx [11061395.830656] Code: 87 ca 04 00 00 00 5b 41 5c 41 5d 5d c3 c3 49 8b bc 24 40 06 00 00 eb 8d 48 bb cf f7 53 e3 a5 9b c4 20 4c 89 ef e8 0c fe 0e 00 <48> 8b 78 20 48 c1 ef 03 48 89 f8 41 8b bc 24 80 04 00 00 48 f7 e3 Jul 26 15:05:02 rx [11061395.849665] RSP: 0018:ffffb75d40003e08 EFLAGS: 00010246 Jul 26 15:05:02 rx [11061395.855149] RAX: 0000000000000000 RBX: 20c49ba5e353f7cf RCX: 0000000000000000 Jul 26 15:05:02 rx [11061395.862542] RDX: 0000000062177c30 RSI: 000000000000231c RDI: ffff9874ad283a60 Jul 26 15:05:02 rx [11061395.869933] RBP: ffffb75d40003e20 R08: 0000000000000000 R09: ffff987605e20aa8 Jul 26 15:05:02 rx [11061395.877318] R10: ffffb75d40003f00 R11: ffffb75d4460f740 R12: ffff9874ad283900 Jul 26 15:05:02 rx [11061395.884710] R13: ffff9874ad283a60 R14: ffff9874ad283980 R15: ffff9874ad283d30 Jul 26 15:05:02 rx [11061395.892095] FS: 00007f1ef4a2e700(0000) GS:ffff987605e00000(0000) knlGS:0000000000000000 Jul 26 15:05:02 rx [11061395.900438] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Jul 26 15:05:02 rx [11061395.906435] CR2: 0000000000000020 CR3: 0000003e450ba003 CR4: 0000000000760ef0 Jul 26 15:05:02 rx [11061395.913822] PKRU: 55555554 Jul 26 15:05:02 rx [11061395.916786] Call Trace: Jul 26 15:05:02 rx [11061395.919488] Jul 26 15:05:02 rx [11061395.921765] ? show_regs.cold+0x1a/0x1f Jul 26 15:05:02 rx [11061395.925859] ? __die+0x90/0xd9 Jul 26 15:05:02 rx [11061395.929169] ? no_context+0x196/0x380 Jul 26 15:05:02 rx [11061395.933088] ? ip6_protocol_deliver_rcu+0x4e0/0x4e0 Jul 26 15:05:02 rx [11061395.938216] ? ip6_sublist_rcv_finish+0x3d/0x50 Jul 26 15:05:02 rx [11061395.943000] ? __bad_area_nosemaphore+0x50/0x1a0 Jul 26 15:05:02 rx [11061395.947873] ? bad_area_nosemaphore+0x16/0x20 Jul 26 15:05:02 rx [11061395.952486] ? do_user_addr_fault+0x267/0x450 Jul 26 15:05:02 rx [11061395.957104] ? ipv6_list_rcv+0x112/0x140 Jul 26 15:05:02 rx [11061395.961279] ? __do_page_fault+0x58/0x90 Jul 26 15:05:02 rx [11061395.965458] ? do_page_fault+0x2c/0xe0 Jul 26 15:05:02 rx [11061395.969465] ? page_fault+0x34/0x40 Jul 26 15:05:02 rx [11061395.973217] ? tcp_rearm_rto+0xe4/0x160 Jul 26 15:05:02 rx [11061395.977313] ? tcp_rearm_rto+0xe4/0x160 Jul 26 15:05:02 rx [11061395.981408] tcp_send_loss_probe+0x10b/0x220 Jul 26 15:05:02 rx [11061395.985937] tcp_write_timer_handler+0x1b4/0x240 Jul 26 15:05:02 rx [11061395.990809] tcp_write_timer+0x9e/0xe0 Jul 26 15:05:02 rx [11061395.994814] ? tcp_write_timer_handler+0x240/0x240 Jul 26 15:05:02 rx [11061395.999866] call_timer_fn+0x32/0x130 Jul 26 15:05:02 rx [11061396.003782] __run_timers.part.0+0x180/0x280 Jul 26 15:05:02 rx [11061396.008309] ? recalibrate_cpu_khz+0x10/0x10 Jul 26 15:05:02 rx [11061396.012841] ? native_x2apic_icr_write+0x30/0x30 Jul 26 15:05:02 rx [11061396.017718] ? lapic_next_even ---truncated---

In the Linux kernel before 5.17.2, drivers/soc/qcom/qcom_aoss.c does not release an of_find_device_by_node reference after use, e.g., with put_device.

In the Linux kernel before 6.0.3, drivers/gpu/drm/virtio/virtgpu_object.c misinterprets the drm_gem_shmem_get_sg_table return value (expects it to be NULL in the error case, whereas it is actually an error pointer).

In the Linux kernel, the following vulnerability has been resolved: llc: do not use skb_get() before dev_queue_xmit() syzbot is able to crash hosts [1], using llc and devices not supporting IFF_TX_SKB_SHARING. In this case, e1000 driver calls eth_skb_pad(), while the skb is shared. Simply replace skb_get() by skb_clone() in net/llc/llc_s_ac.c Note that e1000 driver might have an issue with pktgen, because it does not clear IFF_TX_SKB_SHARING, this is an orthogonal change. We need to audit other skb_get() uses in net/llc. [1] kernel BUG at net/core/skbuff.c:2178 ! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 0 UID: 0 PID: 16371 Comm: syz.2.2764 Not tainted 6.14.0-rc4-syzkaller-00052-gac9c34d1e45a #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:pskb_expand_head+0x6ce/0x1240 net/core/skbuff.c:2178 Call Trace: <TASK> __skb_pad+0x18a/0x610 net/core/skbuff.c:2466 __skb_put_padto include/linux/skbuff.h:3843 [inline] skb_put_padto include/linux/skbuff.h:3862 [inline] eth_skb_pad include/linux/etherdevice.h:656 [inline] e1000_xmit_frame+0x2d99/0x5800 drivers/net/ethernet/intel/e1000/e1000_main.c:3128 __netdev_start_xmit include/linux/netdevice.h:5151 [inline] netdev_start_xmit include/linux/netdevice.h:5160 [inline] xmit_one net/core/dev.c:3806 [inline] dev_hard_start_xmit+0x9a/0x7b0 net/core/dev.c:3822 sch_direct_xmit+0x1ae/0xc30 net/sched/sch_generic.c:343 __dev_xmit_skb net/core/dev.c:4045 [inline] __dev_queue_xmit+0x13d4/0x43e0 net/core/dev.c:4621 dev_queue_xmit include/linux/netdevice.h:3313 [inline] llc_sap_action_send_test_c+0x268/0x320 net/llc/llc_s_ac.c:144 llc_exec_sap_trans_actions net/llc/llc_sap.c:153 [inline] llc_sap_next_state net/llc/llc_sap.c:182 [inline] llc_sap_state_process+0x239/0x510 net/llc/llc_sap.c:209 llc_ui_sendmsg+0xd0d/0x14e0 net/llc/af_llc.c:993 sock_sendmsg_nosec net/socket.c:718 [inline]

An issue was discovered in the Linux kernel through 6.1-rc8. dpu_crtc_atomic_check in drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c lacks check of the return value of kzalloc() and will cause the NULL Pointer Dereference.

In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Drop WARNs that assert a triple fault never "escapes" from L2 Remove WARNs that sanity check that KVM never lets a triple fault for L2 escape and incorrectly end up in L1. In normal operation, the sanity check is perfectly valid, but it incorrectly assumes that it's impossible for userspace to induce KVM_REQ_TRIPLE_FAULT without bouncing through KVM_RUN (which guarantees kvm_check_nested_state() will see and handle the triple fault). The WARN can currently be triggered if userspace injects a machine check while L2 is active and CR4.MCE=0. And a future fix to allow save/restore of KVM_REQ_TRIPLE_FAULT, e.g. so that a synthesized triple fault isn't lost on migration, will make it trivially easy for userspace to trigger the WARN. Clearing KVM_REQ_TRIPLE_FAULT when forcibly leaving guest mode is tempting, but wrong, especially if/when the request is saved/restored, e.g. if userspace restores events (including a triple fault) and then restores nested state (which may forcibly leave guest mode). Ignoring the fact that KVM doesn't currently provide the necessary APIs, it's userspace's responsibility to manage pending events during save/restore. ------------[ cut here ]------------ WARNING: CPU: 7 PID: 1399 at arch/x86/kvm/vmx/nested.c:4522 nested_vmx_vmexit+0x7fe/0xd90 [kvm_intel] Modules linked in: kvm_intel kvm irqbypass CPU: 7 PID: 1399 Comm: state_test Not tainted 5.17.0-rc3+ #808 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:nested_vmx_vmexit+0x7fe/0xd90 [kvm_intel] Call Trace: <TASK> vmx_leave_nested+0x30/0x40 [kvm_intel] vmx_set_nested_state+0xca/0x3e0 [kvm_intel] kvm_arch_vcpu_ioctl+0xf49/0x13e0 [kvm] kvm_vcpu_ioctl+0x4b9/0x660 [kvm] __x64_sys_ioctl+0x83/0xb0 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae </TASK> ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: mm/memory-failure: fix handling of dissolved but not taken off from buddy pages When I did memory failure tests recently, below panic occurs: page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x8cee00 flags: 0x6fffe0000000000(node=1|zone=2|lastcpupid=0x7fff) raw: 06fffe0000000000 dead000000000100 dead000000000122 0000000000000000 raw: 0000000000000000 0000000000000009 00000000ffffffff 0000000000000000 page dumped because: VM_BUG_ON_PAGE(!PageBuddy(page)) ------------[ cut here ]------------ kernel BUG at include/linux/page-flags.h:1009! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI RIP: 0010:__del_page_from_free_list+0x151/0x180 RSP: 0018:ffffa49c90437998 EFLAGS: 00000046 RAX: 0000000000000035 RBX: 0000000000000009 RCX: ffff8dd8dfd1c9c8 RDX: 0000000000000000 RSI: 0000000000000027 RDI: ffff8dd8dfd1c9c0 RBP: ffffd901233b8000 R08: ffffffffab5511f8 R09: 0000000000008c69 R10: 0000000000003c15 R11: ffffffffab5511f8 R12: ffff8dd8fffc0c80 R13: 0000000000000001 R14: ffff8dd8fffc0c80 R15: 0000000000000009 FS: 00007ff916304740(0000) GS:ffff8dd8dfd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055eae50124c8 CR3: 00000008479e0000 CR4: 00000000000006f0 Call Trace: <TASK> __rmqueue_pcplist+0x23b/0x520 get_page_from_freelist+0x26b/0xe40 __alloc_pages_noprof+0x113/0x1120 __folio_alloc_noprof+0x11/0xb0 alloc_buddy_hugetlb_folio.isra.0+0x5a/0x130 __alloc_fresh_hugetlb_folio+0xe7/0x140 alloc_pool_huge_folio+0x68/0x100 set_max_huge_pages+0x13d/0x340 hugetlb_sysctl_handler_common+0xe8/0x110 proc_sys_call_handler+0x194/0x280 vfs_write+0x387/0x550 ksys_write+0x64/0xe0 do_syscall_64+0xc2/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7ff916114887 RSP: 002b:00007ffec8a2fd78 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 000055eae500e350 RCX: 00007ff916114887 RDX: 0000000000000004 RSI: 000055eae500e390 RDI: 0000000000000003 RBP: 000055eae50104c0 R08: 0000000000000000 R09: 000055eae50104c0 R10: 0000000000000077 R11: 0000000000000246 R12: 0000000000000004 R13: 0000000000000004 R14: 00007ff916216b80 R15: 00007ff916216a00 </TASK> Modules linked in: mce_inject hwpoison_inject ---[ end trace 0000000000000000 ]--- And before the panic, there had an warning about bad page state: BUG: Bad page state in process page-types pfn:8cee00 page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x8cee00 flags: 0x6fffe0000000000(node=1|zone=2|lastcpupid=0x7fff) page_type: 0xffffff7f(buddy) raw: 06fffe0000000000 ffffd901241c0008 ffffd901240f8008 0000000000000000 raw: 0000000000000000 0000000000000009 00000000ffffff7f 0000000000000000 page dumped because: nonzero mapcount Modules linked in: mce_inject hwpoison_inject CPU: 8 PID: 154211 Comm: page-types Not tainted 6.9.0-rc4-00499-g5544ec3178e2-dirty #22 Call Trace: <TASK> dump_stack_lvl+0x83/0xa0 bad_page+0x63/0xf0 free_unref_page+0x36e/0x5c0 unpoison_memory+0x50b/0x630 simple_attr_write_xsigned.constprop.0.isra.0+0xb3/0x110 debugfs_attr_write+0x42/0x60 full_proxy_write+0x5b/0x80 vfs_write+0xcd/0x550 ksys_write+0x64/0xe0 do_syscall_64+0xc2/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f189a514887 RSP: 002b:00007ffdcd899718 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f189a514887 RDX: 0000000000000009 RSI: 00007ffdcd899730 RDI: 0000000000000003 RBP: 00007ffdcd8997a0 R08: 0000000000000000 R09: 00007ffdcd8994b2 R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffdcda199a8 R13: 0000000000404af1 R14: 000000000040ad78 R15: 00007f189a7a5040 </TASK> The root cause should be the below race: memory_failure try_memory_failure_hugetlb me_huge_page __page_handle_poison dissolve_free_hugetlb_folio drain_all_pages -- Buddy page can be isolated e.g. for compaction. take_page_off_buddy -- Failed as page is not in the ---truncated---

In the Linux kernel, the following vulnerability has been resolved: ARM: 9170/1: fix panic when kasan and kprobe are enabled arm32 uses software to simulate the instruction replaced by kprobe. some instructions may be simulated by constructing assembly functions. therefore, before executing instruction simulation, it is necessary to construct assembly function execution environment in C language through binding registers. after kasan is enabled, the register binding relationship will be destroyed, resulting in instruction simulation errors and causing kernel panic. the kprobe emulate instruction function is distributed in three files: actions-common.c actions-arm.c actions-thumb.c, so disable KASAN when compiling these files. for example, use kprobe insert on cap_capable+20 after kasan enabled, the cap_capable assembly code is as follows: <cap_capable>: e92d47f0 push {r4, r5, r6, r7, r8, r9, sl, lr} e1a05000 mov r5, r0 e280006c add r0, r0, #108 ; 0x6c e1a04001 mov r4, r1 e1a06002 mov r6, r2 e59fa090 ldr sl, [pc, #144] ; ebfc7bf8 bl c03aa4b4 <__asan_load4> e595706c ldr r7, [r5, #108] ; 0x6c e2859014 add r9, r5, #20 ...... The emulate_ldr assembly code after enabling kasan is as follows: c06f1384 <emulate_ldr>: e92d47f0 push {r4, r5, r6, r7, r8, r9, sl, lr} e282803c add r8, r2, #60 ; 0x3c e1a05000 mov r5, r0 e7e37855 ubfx r7, r5, #16, #4 e1a00008 mov r0, r8 e1a09001 mov r9, r1 e1a04002 mov r4, r2 ebf35462 bl c03c6530 <__asan_load4> e357000f cmp r7, #15 e7e36655 ubfx r6, r5, #12, #4 e205a00f and sl, r5, #15 0a000001 beq c06f13bc <emulate_ldr+0x38> e0840107 add r0, r4, r7, lsl #2 ebf3545c bl c03c6530 <__asan_load4> e084010a add r0, r4, sl, lsl #2 ebf3545a bl c03c6530 <__asan_load4> e2890010 add r0, r9, #16 ebf35458 bl c03c6530 <__asan_load4> e5990010 ldr r0, [r9, #16] e12fff30 blx r0 e356000f cm r6, #15 1a000014 bne c06f1430 <emulate_ldr+0xac> e1a06000 mov r6, r0 e2840040 add r0, r4, #64 ; 0x40 ...... when running in emulate_ldr to simulate the ldr instruction, panic occurred, and the log is as follows: Unable to handle kernel NULL pointer dereference at virtual address 00000090 pgd = ecb46400 [00000090] *pgd=2e0fa003, *pmd=00000000 Internal error: Oops: 206 [#1] SMP ARM PC is at cap_capable+0x14/0xb0 LR is at emulate_ldr+0x50/0xc0 psr: 600d0293 sp : ecd63af8 ip : 00000004 fp : c0a7c30c r10: 00000000 r9 : c30897f4 r8 : ecd63cd4 r7 : 0000000f r6 : 0000000a r5 : e59fa090 r4 : ecd63c98 r3 : c06ae294 r2 : 00000000 r1 : b7611300 r0 : bf4ec008 Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user Control: 32c5387d Table: 2d546400 DAC: 55555555 Process bash (pid: 1643, stack limit = 0xecd60190) (cap_capable) from (kprobe_handler+0x218/0x340) (kprobe_handler) from (kprobe_trap_handler+0x24/0x48) (kprobe_trap_handler) from (do_undefinstr+0x13c/0x364) (do_undefinstr) from (__und_svc_finish+0x0/0x30) (__und_svc_finish) from (cap_capable+0x18/0xb0) (cap_capable) from (cap_vm_enough_memory+0x38/0x48) (cap_vm_enough_memory) from (security_vm_enough_memory_mm+0x48/0x6c) (security_vm_enough_memory_mm) from (copy_process.constprop.5+0x16b4/0x25c8) (copy_process.constprop.5) from (_do_fork+0xe8/0x55c) (_do_fork) from (SyS_clone+0x1c/0x24) (SyS_clone) from (__sys_trace_return+0x0/0x10) Code: 0050a0e1 6c0080e2 0140a0e1 0260a0e1 (f801f0e7)

In the Linux kernel, the following vulnerability has been resolved: drm/i915: Fix crash in auto_retire The retire logic uses the 2 lower bits of the pointer to the retire function to store flags. However, the auto_retire function is not guaranteed to be aligned to a multiple of 4, which causes crashes as we jump to the wrong address, for example like this: 2021-04-24T18:03:53.804300Z WARNING kernel: [ 516.876901] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI 2021-04-24T18:03:53.804310Z WARNING kernel: [ 516.876906] CPU: 7 PID: 146 Comm: kworker/u16:6 Tainted: G U 5.4.105-13595-g3cd84167b2df #1 2021-04-24T18:03:53.804311Z WARNING kernel: [ 516.876907] Hardware name: Google Volteer2/Volteer2, BIOS Google_Volteer2.13672.76.0 02/22/2021 2021-04-24T18:03:53.804312Z WARNING kernel: [ 516.876911] Workqueue: events_unbound active_work 2021-04-24T18:03:53.804313Z WARNING kernel: [ 516.876914] RIP: 0010:auto_retire+0x1/0x20 2021-04-24T18:03:53.804314Z WARNING kernel: [ 516.876916] Code: e8 01 f2 ff ff eb 02 31 db 48 89 d8 5b 5d c3 0f 1f 44 00 00 55 48 89 e5 f0 ff 87 c8 00 00 00 0f 88 ab 47 4a 00 31 c0 5d c3 0f <1f> 44 00 00 55 48 89 e5 f0 ff 8f c8 00 00 00 0f 88 9a 47 4a 00 74 2021-04-24T18:03:53.804319Z WARNING kernel: [ 516.876918] RSP: 0018:ffff9b4d809fbe38 EFLAGS: 00010286 2021-04-24T18:03:53.804320Z WARNING kernel: [ 516.876919] RAX: 0000000000000007 RBX: ffff927915079600 RCX: 0000000000000007 2021-04-24T18:03:53.804320Z WARNING kernel: [ 516.876921] RDX: ffff9b4d809fbe40 RSI: 0000000000000286 RDI: ffff927915079600 2021-04-24T18:03:53.804321Z WARNING kernel: [ 516.876922] RBP: ffff9b4d809fbe68 R08: 8080808080808080 R09: fefefefefefefeff 2021-04-24T18:03:53.804321Z WARNING kernel: [ 516.876924] R10: 0000000000000010 R11: ffffffff92e44bd8 R12: ffff9279150796a0 2021-04-24T18:03:53.804322Z WARNING kernel: [ 516.876925] R13: ffff92791c368180 R14: ffff927915079640 R15: 000000001c867605 2021-04-24T18:03:53.804323Z WARNING kernel: [ 516.876926] FS: 0000000000000000(0000) GS:ffff92791ffc0000(0000) knlGS:0000000000000000 2021-04-24T18:03:53.804323Z WARNING kernel: [ 516.876928] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 2021-04-24T18:03:53.804324Z WARNING kernel: [ 516.876929] CR2: 0000239514955000 CR3: 00000007f82da001 CR4: 0000000000760ee0 2021-04-24T18:03:53.804325Z WARNING kernel: [ 516.876930] PKRU: 55555554 2021-04-24T18:03:53.804325Z WARNING kernel: [ 516.876931] Call Trace: 2021-04-24T18:03:53.804326Z WARNING kernel: [ 516.876935] __active_retire+0x77/0xcf 2021-04-24T18:03:53.804326Z WARNING kernel: [ 516.876939] process_one_work+0x1da/0x394 2021-04-24T18:03:53.804327Z WARNING kernel: [ 516.876941] worker_thread+0x216/0x375 2021-04-24T18:03:53.804327Z WARNING kernel: [ 516.876944] kthread+0x147/0x156 2021-04-24T18:03:53.804335Z WARNING kernel: [ 516.876946] ? pr_cont_work+0x58/0x58 2021-04-24T18:03:53.804335Z WARNING kernel: [ 516.876948] ? kthread_blkcg+0x2e/0x2e 2021-04-24T18:03:53.804336Z WARNING kernel: [ 516.876950] ret_from_fork+0x1f/0x40 2021-04-24T18:03:53.804336Z WARNING kernel: [ 516.876952] Modules linked in: cdc_mbim cdc_ncm cdc_wdm xt_cgroup rfcomm cmac algif_hash algif_skcipher af_alg xt_MASQUERADE uinput snd_soc_rt5682_sdw snd_soc_rt5682 snd_soc_max98373_sdw snd_soc_max98373 snd_soc_rl6231 regmap_sdw snd_soc_sof_sdw snd_soc_hdac_hdmi snd_soc_dmic snd_hda_codec_hdmi snd_sof_pci snd_sof_intel_hda_common intel_ipu6_psys snd_sof_xtensa_dsp soundwire_intel soundwire_generic_allocation soundwire_cadence snd_sof_intel_hda snd_sof snd_soc_hdac_hda snd_soc_acpi_intel_match snd_soc_acpi snd_hda_ext_core soundwire_bus snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hwdep snd_hda_core intel_ipu6_isys videobuf2_dma_contig videobuf2_v4l2 videobuf2_common videobuf2_memops mei_hdcp intel_ipu6 ov2740 ov8856 at24 sx9310 dw9768 v4l2_fwnode cros_ec_typec intel_pmc_mux roles acpi_als typec fuse iio_trig_sysfs cros_ec_light_prox cros_ec_lid_angle cros_ec_sensors cros ---truncated---

In the Linux kernel, the following vulnerability has been resolved: ubifs: Fix to add refcount once page is set private MM defined the rule [1] very clearly that once page was set with PG_private flag, we should increment the refcount in that page, also main flows like pageout(), migrate_page() will assume there is one additional page reference count if page_has_private() returns true. Otherwise, we may get a BUG in page migration: page:0000000080d05b9d refcount:-1 mapcount:0 mapping:000000005f4d82a8 index:0xe2 pfn:0x14c12 aops:ubifs_file_address_operations [ubifs] ino:8f1 dentry name:"f30e" flags: 0x1fffff80002405(locked|uptodate|owner_priv_1|private|node=0| zone=1|lastcpupid=0x1fffff) page dumped because: VM_BUG_ON_PAGE(page_count(page) != 0) ------------[ cut here ]------------ kernel BUG at include/linux/page_ref.h:184! invalid opcode: 0000 [#1] SMP CPU: 3 PID: 38 Comm: kcompactd0 Not tainted 5.15.0-rc5 RIP: 0010:migrate_page_move_mapping+0xac3/0xe70 Call Trace: ubifs_migrate_page+0x22/0xc0 [ubifs] move_to_new_page+0xb4/0x600 migrate_pages+0x1523/0x1cc0 compact_zone+0x8c5/0x14b0 kcompactd+0x2bc/0x560 kthread+0x18c/0x1e0 ret_from_fork+0x1f/0x30 Before the time, we should make clean a concept, what does refcount means in page gotten from grab_cache_page_write_begin(). There are 2 situations: Situation 1: refcount is 3, page is created by __page_cache_alloc. TYPE_A - the write process is using this page TYPE_B - page is assigned to one certain mapping by calling __add_to_page_cache_locked() TYPE_C - page is added into pagevec list corresponding current cpu by calling lru_cache_add() Situation 2: refcount is 2, page is gotten from the mapping's tree TYPE_B - page has been assigned to one certain mapping TYPE_A - the write process is using this page (by calling page_cache_get_speculative()) Filesystem releases one refcount by calling put_page() in xxx_write_end(), the released refcount corresponds to TYPE_A (write task is using it). If there are any processes using a page, page migration process will skip the page by judging whether expected_page_refs() equals to page refcount. The BUG is caused by following process: PA(cpu 0) kcompactd(cpu 1) compact_zone ubifs_write_begin page_a = grab_cache_page_write_begin add_to_page_cache_lru lru_cache_add pagevec_add // put page into cpu 0's pagevec (refcnf = 3, for page creation process) ubifs_write_end SetPagePrivate(page_a) // doesn't increase page count ! unlock_page(page_a) put_page(page_a) // refcnt = 2 [...] PB(cpu 0) filemap_read filemap_get_pages add_to_page_cache_lru lru_cache_add __pagevec_lru_add // traverse all pages in cpu 0's pagevec __pagevec_lru_add_fn SetPageLRU(page_a) isolate_migratepages isolate_migratepages_block get_page_unless_zero(page_a) // refcnt = 3 list_add(page_a, from_list) migrate_pages(from_list) __unmap_and_move move_to_new_page ubifs_migrate_page(page_a) migrate_page_move_mapping expected_page_refs get 3 (migration[1] + mapping[1] + private[1]) release_pages put_page_testzero(page_a) // refcnt = 3 page_ref_freeze // refcnt = 0 page_ref_dec_and_test(0 - 1 = -1) page_ref_unfreeze VM_BUG_ON_PAGE(-1 != 0, page) UBIFS doesn't increase the page refcount after setting private flag, which leads to page migration task believes the page is not used by any other processes, so the page is migrated. This causes concurrent accessing on page refcount between put_page() called by other process(eg. read process calls lru_cache_add) and page_ref_unfreeze() called by mi ---truncated---

In the Linux kernel, the following vulnerability has been resolved: drm/meson: fix shutdown crash when component not probed When main component is not probed, by example when the dw-hdmi module is not loaded yet or in probe defer, the following crash appears on shutdown: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000038 ... pc : meson_drv_shutdown+0x24/0x50 lr : platform_drv_shutdown+0x20/0x30 ... Call trace: meson_drv_shutdown+0x24/0x50 platform_drv_shutdown+0x20/0x30 device_shutdown+0x158/0x360 kernel_restart_prepare+0x38/0x48 kernel_restart+0x18/0x68 __do_sys_reboot+0x224/0x250 __arm64_sys_reboot+0x24/0x30 ... Simply check if the priv struct has been allocated before using it.

In the Linux kernel, the following vulnerability has been resolved: block: don't call rq_qos_ops->done_bio if the bio isn't tracked rq_qos framework is only applied on request based driver, so: 1) rq_qos_done_bio() needn't to be called for bio based driver 2) rq_qos_done_bio() needn't to be called for bio which isn't tracked, such as bios ended from error handling code. Especially in bio_endio(): 1) request queue is referred via bio->bi_bdev->bd_disk->queue, which may be gone since request queue refcount may not be held in above two cases 2) q->rq_qos may be freed in blk_cleanup_queue() when calling into __rq_qos_done_bio() Fix the potential kernel panic by not calling rq_qos_ops->done_bio if the bio isn't tracked. This way is safe because both ioc_rqos_done_bio() and blkcg_iolatency_done_bio() are nop if the bio isn't tracked.

In the Linux kernel before 6.2, mm/memory-tiers.c misinterprets the alloc_memory_type return value (expects it to be NULL in the error case, whereas it is actually an error pointer). NOTE: this is disputed by third parties because there are no realistic cases in which a user can cause the alloc_memory_type error case to be reached.

In the Linux kernel, the following vulnerability has been resolved: crypto: sun8i-ss - Fix memory leak of pad It appears there are several failure return paths that don't seem to be free'ing pad. Fix these. Addresses-Coverity: ("Resource leak")

In the Linux kernel, the following vulnerability has been resolved: misc: alcor_pci: fix null-ptr-deref when there is no PCI bridge There is an issue with the ASPM(optional) capability checking function. A device might be attached to root complex directly, in this case, bus->self(bridge) will be NULL, thus priv->parent_pdev is NULL. Since alcor_pci_init_check_aspm(priv->parent_pdev) checks the PCI link's ASPM capability and populate parent_cap_off, which will be used later by alcor_pci_aspm_ctrl() to dynamically turn on/off device, what we can do here is to avoid checking the capability if we are on the root complex. This will make pdev_cap_off 0 and alcor_pci_aspm_ctrl() will simply return when bring called, effectively disable ASPM for the device. [ 1.246492] BUG: kernel NULL pointer dereference, address: 00000000000000c0 [ 1.248731] RIP: 0010:pci_read_config_byte+0x5/0x40 [ 1.253998] Call Trace: [ 1.254131] ? alcor_pci_find_cap_offset.isra.0+0x3a/0x100 [alcor_pci] [ 1.254476] alcor_pci_probe+0x169/0x2d5 [alcor_pci]

In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: Fix a deadlock in the error handler The following deadlock has been observed on a test setup: - All tags allocated - The SCSI error handler calls ufshcd_eh_host_reset_handler() - ufshcd_eh_host_reset_handler() queues work that calls ufshcd_err_handler() - ufshcd_err_handler() locks up as follows: Workqueue: ufs_eh_wq_0 ufshcd_err_handler.cfi_jt Call trace: __switch_to+0x298/0x5d8 __schedule+0x6cc/0xa94 schedule+0x12c/0x298 blk_mq_get_tag+0x210/0x480 __blk_mq_alloc_request+0x1c8/0x284 blk_get_request+0x74/0x134 ufshcd_exec_dev_cmd+0x68/0x640 ufshcd_verify_dev_init+0x68/0x35c ufshcd_probe_hba+0x12c/0x1cb8 ufshcd_host_reset_and_restore+0x88/0x254 ufshcd_reset_and_restore+0xd0/0x354 ufshcd_err_handler+0x408/0xc58 process_one_work+0x24c/0x66c worker_thread+0x3e8/0xa4c kthread+0x150/0x1b4 ret_from_fork+0x10/0x30 Fix this lockup by making ufshcd_exec_dev_cmd() allocate a reserved request.

In the Linux kernel, the following vulnerability has been resolved: powerpc/64s: Fix unrecoverable MCE calling async handler from NMI The machine check handler is not considered NMI on 64s. The early handler is the true NMI handler, and then it schedules the machine_check_exception handler to run when interrupts are enabled. This works fine except the case of an unrecoverable MCE, where the true NMI is taken when MSR[RI] is clear, it can not recover, so it calls machine_check_exception directly so something might be done about it. Calling an async handler from NMI context can result in irq state and other things getting corrupted. This can also trigger the BUG at arch/powerpc/include/asm/interrupt.h:168 BUG_ON(!arch_irq_disabled_regs(regs) && !(regs->msr & MSR_EE)); Fix this by making an _async version of the handler which is called in the normal case, and a NMI version that is called for unrecoverable interrupts.

In the Linux kernel, the following vulnerability has been resolved: Input: appletouch - initialize work before device registration Syzbot has reported warning in __flush_work(). This warning is caused by work->func == NULL, which means missing work initialization. This may happen, since input_dev->close() calls cancel_work_sync(&dev->work), but dev->work initalization happens _after_ input_register_device() call. So this patch moves dev->work initialization before registering input device

In the Linux kernel, the following vulnerability has been resolved: mac80211: limit injected vht mcs/nss in ieee80211_parse_tx_radiotap Limit max values for vht mcs and nss in ieee80211_parse_tx_radiotap routine in order to fix the following warning reported by syzbot: WARNING: CPU: 0 PID: 10717 at include/net/mac80211.h:989 ieee80211_rate_set_vht include/net/mac80211.h:989 [inline] WARNING: CPU: 0 PID: 10717 at include/net/mac80211.h:989 ieee80211_parse_tx_radiotap+0x101e/0x12d0 net/mac80211/tx.c:2244 Modules linked in: CPU: 0 PID: 10717 Comm: syz-executor.5 Not tainted 5.14.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:ieee80211_rate_set_vht include/net/mac80211.h:989 [inline] RIP: 0010:ieee80211_parse_tx_radiotap+0x101e/0x12d0 net/mac80211/tx.c:2244 RSP: 0018:ffffc9000186f3e8 EFLAGS: 00010216 RAX: 0000000000000618 RBX: ffff88804ef76500 RCX: ffffc900143a5000 RDX: 0000000000040000 RSI: ffffffff888f478e RDI: 0000000000000003 RBP: 00000000ffffffff R08: 0000000000000000 R09: 0000000000000100 R10: ffffffff888f46f9 R11: 0000000000000000 R12: 00000000fffffff8 R13: ffff88804ef7653c R14: 0000000000000001 R15: 0000000000000004 FS: 00007fbf5718f700(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b2de23000 CR3: 000000006a671000 CR4: 00000000001506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000600 Call Trace: ieee80211_monitor_select_queue+0xa6/0x250 net/mac80211/iface.c:740 netdev_core_pick_tx+0x169/0x2e0 net/core/dev.c:4089 __dev_queue_xmit+0x6f9/0x3710 net/core/dev.c:4165 __bpf_tx_skb net/core/filter.c:2114 [inline] __bpf_redirect_no_mac net/core/filter.c:2139 [inline] __bpf_redirect+0x5ba/0xd20 net/core/filter.c:2162 ____bpf_clone_redirect net/core/filter.c:2429 [inline] bpf_clone_redirect+0x2ae/0x420 net/core/filter.c:2401 bpf_prog_eeb6f53a69e5c6a2+0x59/0x234 bpf_dispatcher_nop_func include/linux/bpf.h:717 [inline] __bpf_prog_run include/linux/filter.h:624 [inline] bpf_prog_run include/linux/filter.h:631 [inline] bpf_test_run+0x381/0xa30 net/bpf/test_run.c:119 bpf_prog_test_run_skb+0xb84/0x1ee0 net/bpf/test_run.c:663 bpf_prog_test_run kernel/bpf/syscall.c:3307 [inline] __sys_bpf+0x2137/0x5df0 kernel/bpf/syscall.c:4605 __do_sys_bpf kernel/bpf/syscall.c:4691 [inline] __se_sys_bpf kernel/bpf/syscall.c:4689 [inline] __x64_sys_bpf+0x75/0xb0 kernel/bpf/syscall.c:4689 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x4665f9

In the Linux kernel, the following vulnerability has been resolved: drm/amd/amdgpu: fix potential memleak In function amdgpu_get_xgmi_hive, when kobject_init_and_add failed There is a potential memleak if not call kobject_put.

In the Linux kernel, the following vulnerability has been resolved: iio: core: fix ioctl handlers removal Currently ioctl handlers are removed twice. For the first time during iio_device_unregister() then later on inside iio_device_unregister_eventset() and iio_buffers_free_sysfs_and_mask(). Double free leads to kernel panic. Fix this by not touching ioctl handlers list directly but rather letting code responsible for registration call the matching cleanup routine itself.

In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: oss: Fix negative period/buffer sizes The period size calculation in OSS layer may receive a negative value as an error, but the code there assumes only the positive values and handle them with size_t. Due to that, a too big value may be passed to the lower layers. This patch changes the code to handle with ssize_t and adds the proper error checks appropriately.

In the Linux kernel, the following vulnerability has been resolved: ASoC: core: Fix Null-point-dereference in fmt_single_name() Check the return value of devm_kstrdup() in case of Null-point-dereference.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix null deref accessing lag dev It could be the lag dev is null so stop processing the event. In bond_enslave() the active/backup slave being set before setting the upper dev so first event is without an upper dev. After setting the upper dev with bond_master_upper_dev_link() there is a second event and in that event we have an upper dev.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Update error handler for UCTX and UMEM In the fast unload flow, the device state is set to internal error, which indicates that the driver started the destroy process. In this case, when a destroy command is being executed, it should return MLX5_CMD_STAT_OK. Fix MLX5_CMD_OP_DESTROY_UCTX and MLX5_CMD_OP_DESTROY_UMEM to return OK instead of EIO. This fixes a call trace in the umem release process - [ 2633.536695] Call Trace: [ 2633.537518] ib_uverbs_remove_one+0xc3/0x140 [ib_uverbs] [ 2633.538596] remove_client_context+0x8b/0xd0 [ib_core] [ 2633.539641] disable_device+0x8c/0x130 [ib_core] [ 2633.540615] __ib_unregister_device+0x35/0xa0 [ib_core] [ 2633.541640] ib_unregister_device+0x21/0x30 [ib_core] [ 2633.542663] __mlx5_ib_remove+0x38/0x90 [mlx5_ib] [ 2633.543640] auxiliary_bus_remove+0x1e/0x30 [auxiliary] [ 2633.544661] device_release_driver_internal+0x103/0x1f0 [ 2633.545679] bus_remove_device+0xf7/0x170 [ 2633.546640] device_del+0x181/0x410 [ 2633.547606] mlx5_rescan_drivers_locked.part.10+0x63/0x160 [mlx5_core] [ 2633.548777] mlx5_unregister_device+0x27/0x40 [mlx5_core] [ 2633.549841] mlx5_uninit_one+0x21/0xc0 [mlx5_core] [ 2633.550864] remove_one+0x69/0xe0 [mlx5_core] [ 2633.551819] pci_device_remove+0x3b/0xc0 [ 2633.552731] device_release_driver_internal+0x103/0x1f0 [ 2633.553746] unbind_store+0xf6/0x130 [ 2633.554657] kernfs_fop_write+0x116/0x190 [ 2633.555567] vfs_write+0xa5/0x1a0 [ 2633.556407] ksys_write+0x4f/0xb0 [ 2633.557233] do_syscall_64+0x5b/0x1a0 [ 2633.558071] entry_SYSCALL_64_after_hwframe+0x65/0xca [ 2633.559018] RIP: 0033:0x7f9977132648 [ 2633.559821] Code: 89 02 48 c7 c0 ff ff ff ff eb b3 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 55 6f 2d 00 8b 00 85 c0 75 17 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 41 54 49 89 d4 55 [ 2633.562332] RSP: 002b:00007fffb1a83888 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 2633.563472] RAX: ffffffffffffffda RBX: 000000000000000c RCX: 00007f9977132648 [ 2633.564541] RDX: 000000000000000c RSI: 000055b90546e230 RDI: 0000000000000001 [ 2633.565596] RBP: 000055b90546e230 R08: 00007f9977406860 R09: 00007f9977a54740 [ 2633.566653] R10: 0000000000000000 R11: 0000000000000246 R12: 00007f99774056e0 [ 2633.567692] R13: 000000000000000c R14: 00007f9977400880 R15: 000000000000000c [ 2633.568725] ---[ end trace 10b4fe52945e544d ]---

In the Linux kernel, the following vulnerability has been resolved: blk-mq: cancel blk-mq dispatch work in both blk_cleanup_queue and disk_release() For avoiding to slow down queue destroy, we don't call blk_mq_quiesce_queue() in blk_cleanup_queue(), instead of delaying to cancel dispatch work in blk_release_queue(). However, this way has caused kernel oops[1], reported by Changhui. The log shows that scsi_device can be freed before running blk_release_queue(), which is expected too since scsi_device is released after the scsi disk is closed and the scsi_device is removed. Fixes the issue by canceling blk-mq dispatch work in both blk_cleanup_queue() and disk_release(): 1) when disk_release() is run, the disk has been closed, and any sync dispatch activities have been done, so canceling dispatch work is enough to quiesce filesystem I/O dispatch activity. 2) in blk_cleanup_queue(), we only focus on passthrough request, and passthrough request is always explicitly allocated & freed by its caller, so once queue is frozen, all sync dispatch activity for passthrough request has been done, then it is enough to just cancel dispatch work for avoiding any dispatch activity. [1] kernel panic log [12622.769416] BUG: kernel NULL pointer dereference, address: 0000000000000300 [12622.777186] #PF: supervisor read access in kernel mode [12622.782918] #PF: error_code(0x0000) - not-present page [12622.788649] PGD 0 P4D 0 [12622.791474] Oops: 0000 [#1] PREEMPT SMP PTI [12622.796138] CPU: 10 PID: 744 Comm: kworker/10:1H Kdump: loaded Not tainted 5.15.0+ #1 [12622.804877] Hardware name: Dell Inc. PowerEdge R730/0H21J3, BIOS 1.5.4 10/002/2015 [12622.813321] Workqueue: kblockd blk_mq_run_work_fn [12622.818572] RIP: 0010:sbitmap_get+0x75/0x190 [12622.823336] Code: 85 80 00 00 00 41 8b 57 08 85 d2 0f 84 b1 00 00 00 45 31 e4 48 63 cd 48 8d 1c 49 48 c1 e3 06 49 03 5f 10 4c 8d 6b 40 83 f0 01 <48> 8b 33 44 89 f2 4c 89 ef 0f b6 c8 e8 fa f3 ff ff 83 f8 ff 75 58 [12622.844290] RSP: 0018:ffffb00a446dbd40 EFLAGS: 00010202 [12622.850120] RAX: 0000000000000001 RBX: 0000000000000300 RCX: 0000000000000004 [12622.858082] RDX: 0000000000000006 RSI: 0000000000000082 RDI: ffffa0b7a2dfe030 [12622.866042] RBP: 0000000000000004 R08: 0000000000000001 R09: ffffa0b742721334 [12622.874003] R10: 0000000000000008 R11: 0000000000000008 R12: 0000000000000000 [12622.881964] R13: 0000000000000340 R14: 0000000000000000 R15: ffffa0b7a2dfe030 [12622.889926] FS: 0000000000000000(0000) GS:ffffa0baafb40000(0000) knlGS:0000000000000000 [12622.898956] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [12622.905367] CR2: 0000000000000300 CR3: 0000000641210001 CR4: 00000000001706e0 [12622.913328] Call Trace: [12622.916055] <TASK> [12622.918394] scsi_mq_get_budget+0x1a/0x110 [12622.922969] __blk_mq_do_dispatch_sched+0x1d4/0x320 [12622.928404] ? pick_next_task_fair+0x39/0x390 [12622.933268] __blk_mq_sched_dispatch_requests+0xf4/0x140 [12622.939194] blk_mq_sched_dispatch_requests+0x30/0x60 [12622.944829] __blk_mq_run_hw_queue+0x30/0xa0 [12622.949593] process_one_work+0x1e8/0x3c0 [12622.954059] worker_thread+0x50/0x3b0 [12622.958144] ? rescuer_thread+0x370/0x370 [12622.962616] kthread+0x158/0x180 [12622.966218] ? set_kthread_struct+0x40/0x40 [12622.970884] ret_from_fork+0x22/0x30 [12622.974875] </TASK> [12622.977309] Modules linked in: scsi_debug rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs sunrpc dm_multipath intel_rapl_msr intel_rapl_common dell_wmi_descriptor sb_edac rfkill video x86_pkg_temp_thermal intel_powerclamp dcdbas coretemp kvm_intel kvm mgag200 irqbypass i2c_algo_bit rapl drm_kms_helper ipmi_ssif intel_cstate intel_uncore syscopyarea sysfillrect sysimgblt fb_sys_fops pcspkr cec mei_me lpc_ich mei ipmi_si ipmi_devintf ipmi_msghandler acpi_power_meter drm fuse xfs libcrc32c sr_mod cdrom sd_mod t10_pi sg ixgbe ahci libahci crct10dif_pclmul crc32_pclmul crc32c_intel libata megaraid_sas ghash_clmulni_intel tg3 wdat_w ---truncated---

In the Linux kernel, the following vulnerability has been resolved: usb: chipidea: ci_hdrc_imx: Also search for 'phys' phandle When passing 'phys' in the devicetree to describe the USB PHY phandle (which is the recommended way according to Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt) the following NULL pointer dereference is observed on i.MX7 and i.MX8MM: [ 1.489344] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000098 [ 1.498170] Mem abort info: [ 1.500966] ESR = 0x96000044 [ 1.504030] EC = 0x25: DABT (current EL), IL = 32 bits [ 1.509356] SET = 0, FnV = 0 [ 1.512416] EA = 0, S1PTW = 0 [ 1.515569] FSC = 0x04: level 0 translation fault [ 1.520458] Data abort info: [ 1.523349] ISV = 0, ISS = 0x00000044 [ 1.527196] CM = 0, WnR = 1 [ 1.530176] [0000000000000098] user address but active_mm is swapper [ 1.536544] Internal error: Oops: 96000044 [#1] PREEMPT SMP [ 1.542125] Modules linked in: [ 1.545190] CPU: 3 PID: 7 Comm: kworker/u8:0 Not tainted 5.14.0-dirty #3 [ 1.551901] Hardware name: Kontron i.MX8MM N801X S (DT) [ 1.557133] Workqueue: events_unbound deferred_probe_work_func [ 1.562984] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO BTYPE=--) [ 1.568998] pc : imx7d_charger_detection+0x3f0/0x510 [ 1.573973] lr : imx7d_charger_detection+0x22c/0x510 This happens because the charger functions check for the phy presence inside the imx_usbmisc_data structure (data->usb_phy), but the chipidea core populates the usb_phy passed via 'phys' inside 'struct ci_hdrc' (ci->usb_phy) instead. This causes the NULL pointer dereference inside imx7d_charger_detection(). Fix it by also searching for 'phys' in case 'fsl,usbphy' is not found. Tested on a imx7s-warp board.

In the Linux kernel, the following vulnerability has been resolved: bpf, s390: Fix potential memory leak about jit_data Make sure to free jit_data through kfree() in the error path.

In the Linux kernel, the following vulnerability has been resolved: memory: fsl_ifc: fix leak of IO mapping on probe failure On probe error the driver should unmap the IO memory. Smatch reports: drivers/memory/fsl_ifc.c:298 fsl_ifc_ctrl_probe() warn: 'fsl_ifc_ctrl_dev->gregs' not released on lines: 298.

In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: oss: Limit the period size to 16MB Set the practical limit to the period size (the fragment shift in OSS) instead of a full 31bit; a too large value could lead to the exhaust of memory as we allocate temporary buffers of the period size, too. As of this patch, we set to 16MB limit, which should cover all use cases.

In the Linux kernel, the following vulnerability has been resolved: net_sched: fix NULL deref in fifo_set_limit() syzbot reported another NULL deref in fifo_set_limit() [1] I could repro the issue with : unshare -n tc qd add dev lo root handle 1:0 tbf limit 200000 burst 70000 rate 100Mbit tc qd replace dev lo parent 1:0 pfifo_fast tc qd change dev lo root handle 1:0 tbf limit 300000 burst 70000 rate 100Mbit pfifo_fast does not have a change() operation. Make fifo_set_limit() more robust about this. [1] BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 1cf99067 P4D 1cf99067 PUD 7ca49067 PMD 0 Oops: 0010 [#1] PREEMPT SMP KASAN CPU: 1 PID: 14443 Comm: syz-executor959 Not tainted 5.15.0-rc3-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:0x0 Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6. RSP: 0018:ffffc9000e2f7310 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: ffffffff8d6ecc00 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff888024c27910 RDI: ffff888071e34000 RBP: ffff888071e34000 R08: 0000000000000001 R09: ffffffff8fcfb947 R10: 0000000000000001 R11: 0000000000000000 R12: ffff888024c27910 R13: ffff888071e34018 R14: 0000000000000000 R15: ffff88801ef74800 FS: 00007f321d897700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 00000000722c3000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: fifo_set_limit net/sched/sch_fifo.c:242 [inline] fifo_set_limit+0x198/0x210 net/sched/sch_fifo.c:227 tbf_change+0x6ec/0x16d0 net/sched/sch_tbf.c:418 qdisc_change net/sched/sch_api.c:1332 [inline] tc_modify_qdisc+0xd9a/0x1a60 net/sched/sch_api.c:1634 rtnetlink_rcv_msg+0x413/0xb80 net/core/rtnetlink.c:5572 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2504 netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline] netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1340 netlink_sendmsg+0x86d/0xdb0 net/netlink/af_netlink.c:1929 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:724 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2409 ___sys_sendmsg+0xf3/0x170 net/socket.c:2463 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2492 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae

In the Linux kernel, the following vulnerability has been resolved: mptcp: never allow the PM to close a listener subflow Currently, when deleting an endpoint the netlink PM treverses all the local MPTCP sockets, regardless of their status. If an MPTCP listener socket is bound to the IP matching the delete endpoint, the listener TCP socket will be closed. That is unexpected, the PM should only affect data subflows. Additionally, syzbot was able to trigger a NULL ptr dereference due to the above: general protection fault, probably for non-canonical address 0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f] CPU: 1 PID: 6550 Comm: syz-executor122 Not tainted 5.16.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__lock_acquire+0xd7d/0x54a0 kernel/locking/lockdep.c:4897 Code: 0f 0e 41 be 01 00 00 00 0f 86 c8 00 00 00 89 05 69 cc 0f 0e e9 bd 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 da 48 c1 ea 03 <80> 3c 02 00 0f 85 f3 2f 00 00 48 81 3b 20 75 17 8f 0f 84 52 f3 ff RSP: 0018:ffffc90001f2f818 EFLAGS: 00010016 RAX: dffffc0000000000 RBX: 0000000000000018 RCX: 0000000000000000 RDX: 0000000000000003 RSI: 0000000000000000 RDI: 0000000000000001 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000000 R11: 000000000000000a R12: 0000000000000000 R13: ffff88801b98d700 R14: 0000000000000000 R15: 0000000000000001 FS: 00007f177cd3d700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f177cd1b268 CR3: 000000001dd55000 CR4: 0000000000350ee0 Call Trace: <TASK> lock_acquire kernel/locking/lockdep.c:5637 [inline] lock_acquire+0x1ab/0x510 kernel/locking/lockdep.c:5602 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x39/0x50 kernel/locking/spinlock.c:162 finish_wait+0xc0/0x270 kernel/sched/wait.c:400 inet_csk_wait_for_connect net/ipv4/inet_connection_sock.c:464 [inline] inet_csk_accept+0x7de/0x9d0 net/ipv4/inet_connection_sock.c:497 mptcp_accept+0xe5/0x500 net/mptcp/protocol.c:2865 inet_accept+0xe4/0x7b0 net/ipv4/af_inet.c:739 mptcp_stream_accept+0x2e7/0x10e0 net/mptcp/protocol.c:3345 do_accept+0x382/0x510 net/socket.c:1773 __sys_accept4_file+0x7e/0xe0 net/socket.c:1816 __sys_accept4+0xb0/0x100 net/socket.c:1846 __do_sys_accept net/socket.c:1864 [inline] __se_sys_accept net/socket.c:1861 [inline] __x64_sys_accept+0x71/0xb0 net/socket.c:1861 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f177cd8b8e9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 b1 14 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f177cd3d308 EFLAGS: 00000246 ORIG_RAX: 000000000000002b RAX: ffffffffffffffda RBX: 00007f177ce13408 RCX: 00007f177cd8b8e9 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003 RBP: 00007f177ce13400 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f177ce1340c R13: 00007f177cde1004 R14: 6d705f706374706d R15: 0000000000022000 </TASK> Fix the issue explicitly skipping MPTCP socket in TCP_LISTEN status.

In the Linux kernel, the following vulnerability has been resolved: HID: magicmouse: fix NULL-deref on disconnect Commit 9d7b18668956 ("HID: magicmouse: add support for Apple Magic Trackpad 2") added a sanity check for an Apple trackpad but returned success instead of -ENODEV when the check failed. This means that the remove callback will dereference the never-initialised driver data pointer when the driver is later unbound (e.g. on USB disconnect).

In the Linux kernel, the following vulnerability has been resolved: powerpc/mm: Fix lockup on kernel exec fault The powerpc kernel is not prepared to handle exec faults from kernel. Especially, the function is_exec_fault() will return 'false' when an exec fault is taken by kernel, because the check is based on reading current->thread.regs->trap which contains the trap from user. For instance, when provoking a LKDTM EXEC_USERSPACE test, current->thread.regs->trap is set to SYSCALL trap (0xc00), and the fault taken by the kernel is not seen as an exec fault by set_access_flags_filter(). Commit d7df2443cd5f ("powerpc/mm: Fix spurious segfaults on radix with autonuma") made it clear and handled it properly. But later on commit d3ca587404b3 ("powerpc/mm: Fix reporting of kernel execute faults") removed that handling, introducing test based on error_code. And here is the problem, because on the 603 all upper bits of SRR1 get cleared when the TLB instruction miss handler bails out to ISI. Until commit cbd7e6ca0210 ("powerpc/fault: Avoid heavy search_exception_tables() verification"), an exec fault from kernel at a userspace address was indirectly caught by the lack of entry for that address in the exception tables. But after that commit the kernel mainly relies on KUAP or on core mm handling to catch wrong user accesses. Here the access is not wrong, so mm handles it. It is a minor fault because PAGE_EXEC is not set, set_access_flags_filter() should set PAGE_EXEC and voila. But as is_exec_fault() returns false as explained in the beginning, set_access_flags_filter() bails out without setting PAGE_EXEC flag, which leads to a forever minor exec fault. As the kernel is not prepared to handle such exec faults, the thing to do is to fire in bad_kernel_fault() for any exec fault taken by the kernel, as it was prior to commit d3ca587404b3.

In the Linux kernel, the following vulnerability has been resolved: btrfs: free exchange changeset on failures Fstests runs on my VMs have show several kmemleak reports like the following. unreferenced object 0xffff88811ae59080 (size 64): comm "xfs_io", pid 12124, jiffies 4294987392 (age 6.368s) hex dump (first 32 bytes): 00 c0 1c 00 00 00 00 00 ff cf 1c 00 00 00 00 00 ................ 90 97 e5 1a 81 88 ff ff 90 97 e5 1a 81 88 ff ff ................ backtrace: [<00000000ac0176d2>] ulist_add_merge+0x60/0x150 [btrfs] [<0000000076e9f312>] set_state_bits+0x86/0xc0 [btrfs] [<0000000014fe73d6>] set_extent_bit+0x270/0x690 [btrfs] [<000000004f675208>] set_record_extent_bits+0x19/0x20 [btrfs] [<00000000b96137b1>] qgroup_reserve_data+0x274/0x310 [btrfs] [<0000000057e9dcbb>] btrfs_check_data_free_space+0x5c/0xa0 [btrfs] [<0000000019c4511d>] btrfs_delalloc_reserve_space+0x1b/0xa0 [btrfs] [<000000006d37e007>] btrfs_dio_iomap_begin+0x415/0x970 [btrfs] [<00000000fb8a74b8>] iomap_iter+0x161/0x1e0 [<0000000071dff6ff>] __iomap_dio_rw+0x1df/0x700 [<000000002567ba53>] iomap_dio_rw+0x5/0x20 [<0000000072e555f8>] btrfs_file_write_iter+0x290/0x530 [btrfs] [<000000005eb3d845>] new_sync_write+0x106/0x180 [<000000003fb505bf>] vfs_write+0x24d/0x2f0 [<000000009bb57d37>] __x64_sys_pwrite64+0x69/0xa0 [<000000003eba3fdf>] do_syscall_64+0x43/0x90 In case brtfs_qgroup_reserve_data() or btrfs_delalloc_reserve_metadata() fail the allocated extent_changeset will not be freed. So in btrfs_check_data_free_space() and btrfs_delalloc_reserve_space() free the allocated extent_changeset to get rid of the allocated memory. The issue currently only happens in the direct IO write path, but only after 65b3c08606e5 ("btrfs: fix ENOSPC failure when attempting direct IO write into NOCOW range"), and also at defrag_one_locked_target(). Every other place is always calling extent_changeset_free() even if its call to btrfs_delalloc_reserve_space() or btrfs_check_data_free_space() has failed.

In the Linux kernel, the following vulnerability has been resolved: comedi: Fix memory leak in compat_insnlist() `compat_insnlist()` handles the 32-bit version of the `COMEDI_INSNLIST` ioctl (whenwhen `CONFIG_COMPAT` is enabled). It allocates memory to temporarily hold an array of `struct comedi_insn` converted from the 32-bit version in user space. This memory is only being freed if there is a fault while filling the array, otherwise it is leaked. Add a call to `kfree()` to fix the leak.

In the Linux kernel, the following vulnerability has been resolved: powerpc/64: Fix the definition of the fixmap area At the time being, the fixmap area is defined at the top of the address space or just below KASAN. This definition is not valid for PPC64. For PPC64, use the top of the I/O space. Because of circular dependencies, it is not possible to include asm/fixmap.h in asm/book3s/64/pgtable.h , so define a fixed size AREA at the top of the I/O space for fixmap and ensure during build that the size is big enough.

In the Linux kernel, the following vulnerability has been resolved: ipv6: fix memory leak in fib6_rule_suppress The kernel leaks memory when a `fib` rule is present in IPv6 nftables firewall rules and a suppress_prefix rule is present in the IPv6 routing rules (used by certain tools such as wg-quick). In such scenarios, every incoming packet will leak an allocation in `ip6_dst_cache` slab cache. After some hours of `bpftrace`-ing and source code reading, I tracked down the issue to ca7a03c41753 ("ipv6: do not free rt if FIB_LOOKUP_NOREF is set on suppress rule"). The problem with that change is that the generic `args->flags` always have `FIB_LOOKUP_NOREF` set[1][2] but the IPv6-specific flag `RT6_LOOKUP_F_DST_NOREF` might not be, leading to `fib6_rule_suppress` not decreasing the refcount when needed. How to reproduce: - Add the following nftables rule to a prerouting chain: meta nfproto ipv6 fib saddr . mark . iif oif missing drop This can be done with: sudo nft create table inet test sudo nft create chain inet test test_chain '{ type filter hook prerouting priority filter + 10; policy accept; }' sudo nft add rule inet test test_chain meta nfproto ipv6 fib saddr . mark . iif oif missing drop - Run: sudo ip -6 rule add table main suppress_prefixlength 0 - Watch `sudo slabtop -o | grep ip6_dst_cache` to see memory usage increase with every incoming ipv6 packet. This patch exposes the protocol-specific flags to the protocol specific `suppress` function, and check the protocol-specific `flags` argument for RT6_LOOKUP_F_DST_NOREF instead of the generic FIB_LOOKUP_NOREF when decreasing the refcount, like this. [1]: https://github.com/torvalds/linux/blob/ca7a03c4175366a92cee0ccc4fec0038c3266e26/net/ipv6/fib6_rules.c#L71 [2]: https://github.com/torvalds/linux/blob/ca7a03c4175366a92cee0ccc4fec0038c3266e26/net/ipv6/fib6_rules.c#L99

In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix data corruption by fallocate When fallocate punches holes out of inode size, if original isize is in the middle of last cluster, then the part from isize to the end of the cluster will be zeroed with buffer write, at that time isize is not yet updated to match the new size, if writeback is kicked in, it will invoke ocfs2_writepage()->block_write_full_page() where the pages out of inode size will be dropped. That will cause file corruption. Fix this by zero out eof blocks when extending the inode size. Running the following command with qemu-image 4.2.1 can get a corrupted coverted image file easily. qemu-img convert -p -t none -T none -f qcow2 $qcow_image \ -O qcow2 -o compat=1.1 $qcow_image.conv The usage of fallocate in qemu is like this, it first punches holes out of inode size, then extend the inode size. fallocate(11, FALLOC_FL_KEEP_SIZE|FALLOC_FL_PUNCH_HOLE, 2276196352, 65536) = 0 fallocate(11, 0, 2276196352, 65536) = 0 v1: https://www.spinics.net/lists/linux-fsdevel/msg193999.html v2: https://lore.kernel.org/linux-fsdevel/20210525093034.GB4112@quack2.suse.cz/T/

In the Linux kernel, the following vulnerability has been resolved: cfg80211: fix management registrations locking The management registrations locking was broken, the list was locked for each wdev, but cfg80211_mgmt_registrations_update() iterated it without holding all the correct spinlocks, causing list corruption. Rather than trying to fix it with fine-grained locking, just move the lock to the wiphy/rdev (still need the list on each wdev), we already need to hold the wdev lock to change it, so there's no contention on the lock in any case. This trivially fixes the bug since we hold one wdev's lock already, and now will hold the lock that protects all lists.

In the Linux kernel, the following vulnerability has been resolved: x86/mtrr: Check if fixed MTRRs exist before saving them MTRRs have an obsolete fixed variant for fine grained caching control of the 640K-1MB region that uses separate MSRs. This fixed variant has a separate capability bit in the MTRR capability MSR. So far all x86 CPUs which support MTRR have this separate bit set, so it went unnoticed that mtrr_save_state() does not check the capability bit before accessing the fixed MTRR MSRs. Though on a CPU that does not support the fixed MTRR capability this results in a #GP. The #GP itself is harmless because the RDMSR fault is handled gracefully, but results in a WARN_ON(). Add the missing capability check to prevent this.