In the Linux kernel, the following vulnerability has been resolved: calipso: Fix null-ptr-deref in calipso_req_{set,del}attr(). syzkaller reported a null-ptr-deref in sock_omalloc() while allocating a CALIPSO option. [0] The NULL is of struct sock, which was fetched by sk_to_full_sk() in calipso_req_setattr(). Since commit a1a5344ddbe8 ("tcp: avoid two atomic ops for syncookies"), reqsk->rsk_listener could be NULL when SYN Cookie is returned to its client, as hinted by the leading SYN Cookie log. Here are 3 options to fix the bug: 1) Return 0 in calipso_req_setattr() 2) Return an error in calipso_req_setattr() 3) Alaways set rsk_listener 1) is no go as it bypasses LSM, but 2) effectively disables SYN Cookie for CALIPSO. 3) is also no go as there have been many efforts to reduce atomic ops and make TCP robust against DDoS. See also commit 3b24d854cb35 ("tcp/dccp: do not touch listener sk_refcnt under synflood"). As of the blamed commit, SYN Cookie already did not need refcounting, and no one has stumbled on the bug for 9 years, so no CALIPSO user will care about SYN Cookie. Let's return an error in calipso_req_setattr() and calipso_req_delattr() in the SYN Cookie case. This can be reproduced by [1] on Fedora and now connect() of nc times out. [0]: TCP: request_sock_TCPv6: Possible SYN flooding on port [::]:20002. Sending cookies. Oops: general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037] CPU: 3 UID: 0 PID: 12262 Comm: syz.1.2611 Not tainted 6.14.0 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 RIP: 0010:read_pnet include/net/net_namespace.h:406 [inline] RIP: 0010:sock_net include/net/sock.h:655 [inline] RIP: 0010:sock_kmalloc+0x35/0x170 net/core/sock.c:2806 Code: 89 d5 41 54 55 89 f5 53 48 89 fb e8 25 e3 c6 fd e8 f0 91 e3 00 48 8d 7b 30 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 26 01 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b RSP: 0018:ffff88811af89038 EFLAGS: 00010216 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffff888105266400 RDX: 0000000000000006 RSI: ffff88800c890000 RDI: 0000000000000030 RBP: 0000000000000050 R08: 0000000000000000 R09: ffff88810526640e R10: ffffed1020a4cc81 R11: ffff88810526640f R12: 0000000000000000 R13: 0000000000000820 R14: ffff888105266400 R15: 0000000000000050 FS: 00007f0653a07640(0000) GS:ffff88811af80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f863ba096f4 CR3: 00000000163c0005 CR4: 0000000000770ef0 PKRU: 80000000 Call Trace: <IRQ> ipv6_renew_options+0x279/0x950 net/ipv6/exthdrs.c:1288 calipso_req_setattr+0x181/0x340 net/ipv6/calipso.c:1204 calipso_req_setattr+0x56/0x80 net/netlabel/netlabel_calipso.c:597 netlbl_req_setattr+0x18a/0x440 net/netlabel/netlabel_kapi.c:1249 selinux_netlbl_inet_conn_request+0x1fb/0x320 security/selinux/netlabel.c:342 selinux_inet_conn_request+0x1eb/0x2c0 security/selinux/hooks.c:5551 security_inet_conn_request+0x50/0xa0 security/security.c:4945 tcp_v6_route_req+0x22c/0x550 net/ipv6/tcp_ipv6.c:825 tcp_conn_request+0xec8/0x2b70 net/ipv4/tcp_input.c:7275 tcp_v6_conn_request+0x1e3/0x440 net/ipv6/tcp_ipv6.c:1328 tcp_rcv_state_process+0xafa/0x52b0 net/ipv4/tcp_input.c:6781 tcp_v6_do_rcv+0x8a6/0x1a40 net/ipv6/tcp_ipv6.c:1667 tcp_v6_rcv+0x505e/0x5b50 net/ipv6/tcp_ipv6.c:1904 ip6_protocol_deliver_rcu+0x17c/0x1da0 net/ipv6/ip6_input.c:436 ip6_input_finish+0x103/0x180 net/ipv6/ip6_input.c:480 NF_HOOK include/linux/netfilter.h:314 [inline] NF_HOOK include/linux/netfilter.h:308 [inline] ip6_input+0x13c/0x6b0 net/ipv6/ip6_input.c:491 dst_input include/net/dst.h:469 [inline] ip6_rcv_finish net/ipv6/ip6_input.c:79 [inline] ip6_rcv_finish+0xb6/0x490 net/ipv6/ip6_input.c:69 NF_HOOK include/linux/netfilter.h:314 [inline] NF_HOOK include/linux/netf ---truncated---

In the Linux kernel, the following vulnerability has been resolved: nvmet-tcp: don't restore null sk_state_change queue->state_change is set as part of nvmet_tcp_set_queue_sock(), but if the TCP connection isn't established when nvmet_tcp_set_queue_sock() is called then queue->state_change isn't set and sock->sk->sk_state_change isn't replaced. As such we don't need to restore sock->sk->sk_state_change if queue->state_change is NULL. This avoids NULL pointer dereferences such as this: [ 286.462026][ C0] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 286.462814][ C0] #PF: supervisor instruction fetch in kernel mode [ 286.463796][ C0] #PF: error_code(0x0010) - not-present page [ 286.464392][ C0] PGD 8000000140620067 P4D 8000000140620067 PUD 114201067 PMD 0 [ 286.465086][ C0] Oops: Oops: 0010 [#1] SMP KASAN PTI [ 286.465559][ C0] CPU: 0 UID: 0 PID: 1628 Comm: nvme Not tainted 6.15.0-rc2+ #11 PREEMPT(voluntary) [ 286.466393][ C0] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014 [ 286.467147][ C0] RIP: 0010:0x0 [ 286.467420][ C0] Code: Unable to access opcode bytes at 0xffffffffffffffd6. [ 286.467977][ C0] RSP: 0018:ffff8883ae008580 EFLAGS: 00010246 [ 286.468425][ C0] RAX: 0000000000000000 RBX: ffff88813fd34100 RCX: ffffffffa386cc43 [ 286.469019][ C0] RDX: 1ffff11027fa68b6 RSI: 0000000000000008 RDI: ffff88813fd34100 [ 286.469545][ C0] RBP: ffff88813fd34160 R08: 0000000000000000 R09: ffffed1027fa682c [ 286.470072][ C0] R10: ffff88813fd34167 R11: 0000000000000000 R12: ffff88813fd344c3 [ 286.470585][ C0] R13: ffff88813fd34112 R14: ffff88813fd34aec R15: ffff888132cdd268 [ 286.471070][ C0] FS: 00007fe3c04c7d80(0000) GS:ffff88840743f000(0000) knlGS:0000000000000000 [ 286.471644][ C0] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 286.472543][ C0] CR2: ffffffffffffffd6 CR3: 000000012daca000 CR4: 00000000000006f0 [ 286.473500][ C0] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 286.474467][ C0] DR3: 0000000000000000 DR6: 00000000ffff07f0 DR7: 0000000000000400 [ 286.475453][ C0] Call Trace: [ 286.476102][ C0] <IRQ> [ 286.476719][ C0] tcp_fin+0x2bb/0x440 [ 286.477429][ C0] tcp_data_queue+0x190f/0x4e60 [ 286.478174][ C0] ? __build_skb_around+0x234/0x330 [ 286.478940][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.479659][ C0] ? __pfx_tcp_data_queue+0x10/0x10 [ 286.480431][ C0] ? tcp_try_undo_loss+0x640/0x6c0 [ 286.481196][ C0] ? seqcount_lockdep_reader_access.constprop.0+0x82/0x90 [ 286.482046][ C0] ? kvm_clock_get_cycles+0x14/0x30 [ 286.482769][ C0] ? ktime_get+0x66/0x150 [ 286.483433][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.484146][ C0] tcp_rcv_established+0x6e4/0x2050 [ 286.484857][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.485523][ C0] ? ipv4_dst_check+0x160/0x2b0 [ 286.486203][ C0] ? __pfx_tcp_rcv_established+0x10/0x10 [ 286.486917][ C0] ? lock_release+0x217/0x2c0 [ 286.487595][ C0] tcp_v4_do_rcv+0x4d6/0x9b0 [ 286.488279][ C0] tcp_v4_rcv+0x2af8/0x3e30 [ 286.488904][ C0] ? raw_local_deliver+0x51b/0xad0 [ 286.489551][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.490198][ C0] ? __pfx_tcp_v4_rcv+0x10/0x10 [ 286.490813][ C0] ? __pfx_raw_local_deliver+0x10/0x10 [ 286.491487][ C0] ? __pfx_nf_confirm+0x10/0x10 [nf_conntrack] [ 286.492275][ C0] ? rcu_is_watching+0x11/0xb0 [ 286.492900][ C0] ip_protocol_deliver_rcu+0x8f/0x370 [ 286.493579][ C0] ip_local_deliver_finish+0x297/0x420 [ 286.494268][ C0] ip_local_deliver+0x168/0x430 [ 286.494867][ C0] ? __pfx_ip_local_deliver+0x10/0x10 [ 286.495498][ C0] ? __pfx_ip_local_deliver_finish+0x10/0x10 [ 286.496204][ C0] ? ip_rcv_finish_core+0x19a/0x1f20 [ 286.496806][ C0] ? lock_release+0x217/0x2c0 [ 286.497414][ C0] ip_rcv+0x455/0x6e0 [ 286.497945][ C0] ? __pfx_ip_rcv+0x10/0x10 [ ---truncated---

In the Linux kernel, the following vulnerability has been resolved: irqchip/qcom-mpm: Prevent crash when trying to handle non-wake GPIOs On Qualcomm chipsets not all GPIOs are wakeup capable. Those GPIOs do not have a corresponding MPM pin and should not be handled inside the MPM driver. The IRQ domain hierarchy is always applied, so it's required to explicitly disconnect the hierarchy for those. The pinctrl-msm driver marks these with GPIO_NO_WAKE_IRQ. qcom-pdc has a check for this, but irq-qcom-mpm is currently missing the check. This is causing crashes when setting up interrupts for non-wake GPIOs: root@rb1:~# gpiomon -c gpiochip1 10 irq: IRQ159: trimming hierarchy from :soc@0:interrupt-controller@f200000-1 Unable to handle kernel paging request at virtual address ffff8000a1dc3820 Hardware name: Qualcomm Technologies, Inc. Robotics RB1 (DT) pc : mpm_set_type+0x80/0xcc lr : mpm_set_type+0x5c/0xcc Call trace: mpm_set_type+0x80/0xcc (P) qcom_mpm_set_type+0x64/0x158 irq_chip_set_type_parent+0x20/0x38 msm_gpio_irq_set_type+0x50/0x530 __irq_set_trigger+0x60/0x184 __setup_irq+0x304/0x6bc request_threaded_irq+0xc8/0x19c edge_detector_setup+0x260/0x364 linereq_create+0x420/0x5a8 gpio_ioctl+0x2d4/0x6c0 Fix this by copying the check for GPIO_NO_WAKE_IRQ from qcom-pdc.c, so that MPM is removed entirely from the hierarchy for non-wake GPIOs.

In the Linux kernel, the following vulnerability has been resolved: tracing: Fix oob write in trace_seq_to_buffer() syzbot reported this bug: ================================================================== BUG: KASAN: slab-out-of-bounds in trace_seq_to_buffer kernel/trace/trace.c:1830 [inline] BUG: KASAN: slab-out-of-bounds in tracing_splice_read_pipe+0x6be/0xdd0 kernel/trace/trace.c:6822 Write of size 4507 at addr ffff888032b6b000 by task syz.2.320/7260 CPU: 1 UID: 0 PID: 7260 Comm: syz.2.320 Not tainted 6.15.0-rc1-syzkaller-00301-g3bde70a2c827 #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:408 [inline] print_report+0xc3/0x670 mm/kasan/report.c:521 kasan_report+0xe0/0x110 mm/kasan/report.c:634 check_region_inline mm/kasan/generic.c:183 [inline] kasan_check_range+0xef/0x1a0 mm/kasan/generic.c:189 __asan_memcpy+0x3c/0x60 mm/kasan/shadow.c:106 trace_seq_to_buffer kernel/trace/trace.c:1830 [inline] tracing_splice_read_pipe+0x6be/0xdd0 kernel/trace/trace.c:6822 .... ================================================================== It has been reported that trace_seq_to_buffer() tries to copy more data than PAGE_SIZE to buf. Therefore, to prevent this, we should use the smaller of trace_seq_used(&iter->seq) and PAGE_SIZE as an argument.

In the Linux kernel, the following vulnerability has been resolved: riscv: save the SR_SUM status over switches When threads/tasks are switched we need to ensure the old execution's SR_SUM state is saved and the new thread has the old SR_SUM state restored. The issue was seen under heavy load especially with the syz-stress tool running, with crashes as follows in schedule_tail: Unable to handle kernel access to user memory without uaccess routines at virtual address 000000002749f0d0 Oops [#1] Modules linked in: CPU: 1 PID: 4875 Comm: syz-executor.0 Not tainted 5.12.0-rc2-syzkaller-00467-g0d7588ab9ef9 #0 Hardware name: riscv-virtio,qemu (DT) epc : schedule_tail+0x72/0xb2 kernel/sched/core.c:4264 ra : task_pid_vnr include/linux/sched.h:1421 [inline] ra : schedule_tail+0x70/0xb2 kernel/sched/core.c:4264 epc : ffffffe00008c8b0 ra : ffffffe00008c8ae sp : ffffffe025d17ec0 gp : ffffffe005d25378 tp : ffffffe00f0d0000 t0 : 0000000000000000 t1 : 0000000000000001 t2 : 00000000000f4240 s0 : ffffffe025d17ee0 s1 : 000000002749f0d0 a0 : 000000000000002a a1 : 0000000000000003 a2 : 1ffffffc0cfac500 a3 : ffffffe0000c80cc a4 : 5ae9db91c19bbe00 a5 : 0000000000000000 a6 : 0000000000f00000 a7 : ffffffe000082eba s2 : 0000000000040000 s3 : ffffffe00eef96c0 s4 : ffffffe022c77fe0 s5 : 0000000000004000 s6 : ffffffe067d74e00 s7 : ffffffe067d74850 s8 : ffffffe067d73e18 s9 : ffffffe067d74e00 s10: ffffffe00eef96e8 s11: 000000ae6cdf8368 t3 : 5ae9db91c19bbe00 t4 : ffffffc4043cafb2 t5 : ffffffc4043cafba t6 : 0000000000040000 status: 0000000000000120 badaddr: 000000002749f0d0 cause: 000000000000000f Call Trace: [<ffffffe00008c8b0>] schedule_tail+0x72/0xb2 kernel/sched/core.c:4264 [<ffffffe000005570>] ret_from_exception+0x0/0x14 Dumping ftrace buffer: (ftrace buffer empty) ---[ end trace b5f8f9231dc87dda ]--- The issue comes from the put_user() in schedule_tail (kernel/sched/core.c) doing the following: asmlinkage __visible void schedule_tail(struct task_struct *prev) { ... if (current->set_child_tid) put_user(task_pid_vnr(current), current->set_child_tid); ... } the put_user() macro causes the code sequence to come out as follows: 1: __enable_user_access() 2: reg = task_pid_vnr(current); 3: *current->set_child_tid = reg; 4: __disable_user_access() The problem is that we may have a sleeping function as argument which could clear SR_SUM causing the panic above. This was fixed by evaluating the argument of the put_user() macro outside the user-enabled section in commit 285a76bb2cf5 ("riscv: evaluate put_user() arg before enabling user access")" In order for riscv to take advantage of unsafe_get/put_XXX() macros and to avoid the same issue we had with put_user() and sleeping functions we must ensure code flow can go through switch_to() from within a region of code with SR_SUM enabled and come back with SR_SUM still enabled. This patch addresses the problem allowing future work to enable full use of unsafe_get/put_XXX() macros without needing to take a CSR bit flip cost on every access. Make switch_to() save and restore SR_SUM.

In the Linux kernel, the following vulnerability has been resolved: sched/eevdf: Fix se->slice being set to U64_MAX and resulting crash There is a code path in dequeue_entities() that can set the slice of a sched_entity to U64_MAX, which sometimes results in a crash. The offending case is when dequeue_entities() is called to dequeue a delayed group entity, and then the entity's parent's dequeue is delayed. In that case: 1. In the if (entity_is_task(se)) else block at the beginning of dequeue_entities(), slice is set to cfs_rq_min_slice(group_cfs_rq(se)). If the entity was delayed, then it has no queued tasks, so cfs_rq_min_slice() returns U64_MAX. 2. The first for_each_sched_entity() loop dequeues the entity. 3. If the entity was its parent's only child, then the next iteration tries to dequeue the parent. 4. If the parent's dequeue needs to be delayed, then it breaks from the first for_each_sched_entity() loop _without updating slice_. 5. The second for_each_sched_entity() loop sets the parent's ->slice to the saved slice, which is still U64_MAX. This throws off subsequent calculations with potentially catastrophic results. A manifestation we saw in production was: 6. In update_entity_lag(), se->slice is used to calculate limit, which ends up as a huge negative number. 7. limit is used in se->vlag = clamp(vlag, -limit, limit). Because limit is negative, vlag > limit, so se->vlag is set to the same huge negative number. 8. In place_entity(), se->vlag is scaled, which overflows and results in another huge (positive or negative) number. 9. The adjusted lag is subtracted from se->vruntime, which increases or decreases se->vruntime by a huge number. 10. pick_eevdf() calls entity_eligible()/vruntime_eligible(), which incorrectly returns false because the vruntime is so far from the other vruntimes on the queue, causing the (vruntime - cfs_rq->min_vruntime) * load calulation to overflow. 11. Nothing appears to be eligible, so pick_eevdf() returns NULL. 12. pick_next_entity() tries to dereference the return value of pick_eevdf() and crashes. Dumping the cfs_rq states from the core dumps with drgn showed tell-tale huge vruntime ranges and bogus vlag values, and I also traced se->slice being set to U64_MAX on live systems (which was usually "benign" since the rest of the runqueue needed to be in a particular state to crash). Fix it in dequeue_entities() by always setting slice from the first non-empty cfs_rq.

In the Linux kernel, the following vulnerability has been resolved: net: libwx: handle page_pool_dev_alloc_pages error page_pool_dev_alloc_pages could return NULL. There was a WARN_ON(!page) but it would still proceed to use the NULL pointer and then crash. This is similar to commit 001ba0902046 ("net: fec: handle page_pool_dev_alloc_pages error"). This is found by our static analysis tool KNighter.

In the Linux kernel, the following vulnerability has been resolved: io_uring: fix use-after-free of sq->thread in __io_uring_show_fdinfo() syzbot reports: BUG: KASAN: slab-use-after-free in getrusage+0x1109/0x1a60 Read of size 8 at addr ffff88810de2d2c8 by task a.out/304 CPU: 0 UID: 0 PID: 304 Comm: a.out Not tainted 6.16.0-rc1 #1 PREEMPT(voluntary) Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x53/0x70 print_report+0xd0/0x670 ? __pfx__raw_spin_lock_irqsave+0x10/0x10 ? getrusage+0x1109/0x1a60 kasan_report+0xce/0x100 ? getrusage+0x1109/0x1a60 getrusage+0x1109/0x1a60 ? __pfx_getrusage+0x10/0x10 __io_uring_show_fdinfo+0x9fe/0x1790 ? ksys_read+0xf7/0x1c0 ? do_syscall_64+0xa4/0x260 ? vsnprintf+0x591/0x1100 ? __pfx___io_uring_show_fdinfo+0x10/0x10 ? __pfx_vsnprintf+0x10/0x10 ? mutex_trylock+0xcf/0x130 ? __pfx_mutex_trylock+0x10/0x10 ? __pfx_show_fd_locks+0x10/0x10 ? io_uring_show_fdinfo+0x57/0x80 io_uring_show_fdinfo+0x57/0x80 seq_show+0x38c/0x690 seq_read_iter+0x3f7/0x1180 ? inode_set_ctime_current+0x160/0x4b0 seq_read+0x271/0x3e0 ? __pfx_seq_read+0x10/0x10 ? __pfx__raw_spin_lock+0x10/0x10 ? __mark_inode_dirty+0x402/0x810 ? selinux_file_permission+0x368/0x500 ? file_update_time+0x10f/0x160 vfs_read+0x177/0xa40 ? __pfx___handle_mm_fault+0x10/0x10 ? __pfx_vfs_read+0x10/0x10 ? mutex_lock+0x81/0xe0 ? __pfx_mutex_lock+0x10/0x10 ? fdget_pos+0x24d/0x4b0 ksys_read+0xf7/0x1c0 ? __pfx_ksys_read+0x10/0x10 ? do_user_addr_fault+0x43b/0x9c0 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f0f74170fc9 Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 8 RSP: 002b:00007fffece049e8 EFLAGS: 00000206 ORIG_RAX: 0000000000000000 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f0f74170fc9 RDX: 0000000000001000 RSI: 00007fffece049f0 RDI: 0000000000000004 RBP: 00007fffece05ad0 R08: 0000000000000000 R09: 00007fffece04d90 R10: 0000000000000000 R11: 0000000000000206 R12: 00005651720a1100 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK> Allocated by task 298: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_slab_alloc+0x6e/0x70 kmem_cache_alloc_node_noprof+0xe8/0x330 copy_process+0x376/0x5e00 create_io_thread+0xab/0xf0 io_sq_offload_create+0x9ed/0xf20 io_uring_setup+0x12b0/0x1cc0 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 22: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x37/0x50 kmem_cache_free+0xc4/0x360 rcu_core+0x5ff/0x19f0 handle_softirqs+0x18c/0x530 run_ksoftirqd+0x20/0x30 smpboot_thread_fn+0x287/0x6c0 kthread+0x30d/0x630 ret_from_fork+0xef/0x1a0 ret_from_fork_asm+0x1a/0x30 Last potentially related work creation: kasan_save_stack+0x33/0x60 kasan_record_aux_stack+0x8c/0xa0 __call_rcu_common.constprop.0+0x68/0x940 __schedule+0xff2/0x2930 __cond_resched+0x4c/0x80 mutex_lock+0x5c/0xe0 io_uring_del_tctx_node+0xe1/0x2b0 io_uring_clean_tctx+0xb7/0x160 io_uring_cancel_generic+0x34e/0x760 do_exit+0x240/0x2350 do_group_exit+0xab/0x220 __x64_sys_exit_group+0x39/0x40 x64_sys_call+0x1243/0x1840 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x77/0x7f The buggy address belongs to the object at ffff88810de2cb00 which belongs to the cache task_struct of size 3712 The buggy address is located 1992 bytes inside of freed 3712-byte region [ffff88810de2cb00, ffff88810de2d980) which is caused by the task_struct pointed to by sq->thread being released while it is being used in the function __io_uring_show_fdinfo(). Holding ctx->uring_lock does not prevent ehre relase or exit of sq->thread. Fix this by assigning and looking up ->thread under RCU, and grabbing a reference to the task_struct. This e ---truncated---

In the Linux kernel, the following vulnerability has been resolved: mtd: rawnand: brcmnand: fix PM resume warning Fixed warning on PM resume as shown below caused due to uninitialized struct nand_operation that checks chip select field : WARN_ON(op->cs >= nanddev_ntargets(&chip->base) [ 14.588522] ------------[ cut here ]------------ [ 14.588529] WARNING: CPU: 0 PID: 1392 at drivers/mtd/nand/raw/internals.h:139 nand_reset_op+0x1e0/0x1f8 [ 14.588553] Modules linked in: bdc udc_core [ 14.588579] CPU: 0 UID: 0 PID: 1392 Comm: rtcwake Tainted: G W 6.14.0-rc4-g5394eea10651 #16 [ 14.588590] Tainted: [W]=WARN [ 14.588593] Hardware name: Broadcom STB (Flattened Device Tree) [ 14.588598] Call trace: [ 14.588604] dump_backtrace from show_stack+0x18/0x1c [ 14.588622] r7:00000009 r6:0000008b r5:60000153 r4:c0fa558c [ 14.588625] show_stack from dump_stack_lvl+0x70/0x7c [ 14.588639] dump_stack_lvl from dump_stack+0x18/0x1c [ 14.588653] r5:c08d40b0 r4:c1003cb0 [ 14.588656] dump_stack from __warn+0x84/0xe4 [ 14.588668] __warn from warn_slowpath_fmt+0x18c/0x194 [ 14.588678] r7:c08d40b0 r6:c1003cb0 r5:00000000 r4:00000000 [ 14.588681] warn_slowpath_fmt from nand_reset_op+0x1e0/0x1f8 [ 14.588695] r8:70c40dff r7:89705f41 r6:36b4a597 r5:c26c9444 r4:c26b0048 [ 14.588697] nand_reset_op from brcmnand_resume+0x13c/0x150 [ 14.588714] r9:00000000 r8:00000000 r7:c24f8010 r6:c228a3f8 r5:c26c94bc r4:c26b0040 [ 14.588717] brcmnand_resume from platform_pm_resume+0x34/0x54 [ 14.588735] r5:00000010 r4:c0840a50 [ 14.588738] platform_pm_resume from dpm_run_callback+0x5c/0x14c [ 14.588757] dpm_run_callback from device_resume+0xc0/0x324 [ 14.588776] r9:c24f8054 r8:c24f80a0 r7:00000000 r6:00000000 r5:00000010 r4:c24f8010 [ 14.588779] device_resume from dpm_resume+0x130/0x160 [ 14.588799] r9:c22539e4 r8:00000010 r7:c22bebb0 r6:c24f8010 r5:c22539dc r4:c22539b0 [ 14.588802] dpm_resume from dpm_resume_end+0x14/0x20 [ 14.588822] r10:c2204e40 r9:00000000 r8:c228a3fc r7:00000000 r6:00000003 r5:c228a414 [ 14.588826] r4:00000010 [ 14.588828] dpm_resume_end from suspend_devices_and_enter+0x274/0x6f8 [ 14.588848] r5:c228a414 r4:00000000 [ 14.588851] suspend_devices_and_enter from pm_suspend+0x228/0x2bc [ 14.588868] r10:c3502910 r9:c3501f40 r8:00000004 r7:c228a438 r6:c0f95e18 r5:00000000 [ 14.588871] r4:00000003 [ 14.588874] pm_suspend from state_store+0x74/0xd0 [ 14.588889] r7:c228a438 r6:c0f934c8 r5:00000003 r4:00000003 [ 14.588892] state_store from kobj_attr_store+0x1c/0x28 [ 14.588913] r9:00000000 r8:00000000 r7:f09f9f08 r6:00000004 r5:c3502900 r4:c0283250 [ 14.588916] kobj_attr_store from sysfs_kf_write+0x40/0x4c [ 14.588936] r5:c3502900 r4:c0d92a48 [ 14.588939] sysfs_kf_write from kernfs_fop_write_iter+0x104/0x1f0 [ 14.588956] r5:c3502900 r4:c3501f40 [ 14.588960] kernfs_fop_write_iter from vfs_write+0x250/0x420 [ 14.588980] r10:c0e14b48 r9:00000000 r8:c25f5780 r7:00443398 r6:f09f9f68 r5:c34f7f00 [ 14.588983] r4:c042a88c [ 14.588987] vfs_write from ksys_write+0x74/0xe4 [ 14.589005] r10:00000004 r9:c25f5780 r8:c02002fA0 r7:00000000 r6:00000000 r5:c34f7f00 [ 14.589008] r4:c34f7f00 [ 14.589011] ksys_write from sys_write+0x10/0x14 [ 14.589029] r7:00000004 r6:004421c0 r5:00443398 r4:00000004 [ 14.589032] sys_write from ret_fast_syscall+0x0/0x5c [ 14.589044] Exception stack(0xf09f9fa8 to 0xf09f9ff0) [ 14.589050] 9fa0: 00000004 00443398 00000004 00443398 00000004 00000001 [ 14.589056] 9fc0: 00000004 00443398 004421c0 00000004 b6ecbd58 00000008 bebfbc38 0043eb78 [ 14.589062] 9fe0: 00440eb0 bebfbaf8 b6de18a0 b6e579e8 [ 14.589065] ---[ end trace 0000000000000000 ]--- The fix uses the higher level nand_reset(chip, chipnr); where chipnr = 0, when doing PM resume operation in compliance with the controller support for single die nand chip. Switching from nand_reset_op() to nan ---truncated---

In the Linux kernel, the following vulnerability has been resolved: remoteproc: core: Clear table_sz when rproc_shutdown There is case as below could trigger kernel dump: Use U-Boot to start remote processor(rproc) with resource table published to a fixed address by rproc. After Kernel boots up, stop the rproc, load a new firmware which doesn't have resource table ,and start rproc. When starting rproc with a firmware not have resource table, `memcpy(loaded_table, rproc->cached_table, rproc->table_sz)` will trigger dump, because rproc->cache_table is set to NULL during the last stop operation, but rproc->table_sz is still valid. This issue is found on i.MX8MP and i.MX9. Dump as below: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=000000010af63000 [0000000000000000] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP Modules linked in: CPU: 2 UID: 0 PID: 1060 Comm: sh Not tainted 6.14.0-rc7-next-20250317-dirty #38 Hardware name: NXP i.MX8MPlus EVK board (DT) pstate: a0000005 (NzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __pi_memcpy_generic+0x110/0x22c lr : rproc_start+0x88/0x1e0 Call trace: __pi_memcpy_generic+0x110/0x22c (P) rproc_boot+0x198/0x57c state_store+0x40/0x104 dev_attr_store+0x18/0x2c sysfs_kf_write+0x7c/0x94 kernfs_fop_write_iter+0x120/0x1cc vfs_write+0x240/0x378 ksys_write+0x70/0x108 __arm64_sys_write+0x1c/0x28 invoke_syscall+0x48/0x10c el0_svc_common.constprop.0+0xc0/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x30/0xcc el0t_64_sync_handler+0x10c/0x138 el0t_64_sync+0x198/0x19c Clear rproc->table_sz to address the issue.

In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Avoid using sk_socket after free when sending The sk->sk_socket is not locked or referenced in backlog thread, and during the call to skb_send_sock(), there is a race condition with the release of sk_socket. All types of sockets(tcp/udp/unix/vsock) will be affected. Race conditions: ''' CPU0 CPU1 backlog::skb_send_sock sendmsg_unlocked sock_sendmsg sock_sendmsg_nosec close(fd): ... ops->release() -> sock_map_close() sk_socket->ops = NULL free(socket) sock->ops->sendmsg ^ panic here ''' The ref of psock become 0 after sock_map_close() executed. ''' void sock_map_close() { ... if (likely(psock)) { ... // !! here we remove psock and the ref of psock become 0 sock_map_remove_links(sk, psock) psock = sk_psock_get(sk); if (unlikely(!psock)) goto no_psock; <=== Control jumps here via goto ... cancel_delayed_work_sync(&psock->work); <=== not executed sk_psock_put(sk, psock); ... } ''' Based on the fact that we already wait for the workqueue to finish in sock_map_close() if psock is held, we simply increase the psock reference count to avoid race conditions. With this patch, if the backlog thread is running, sock_map_close() will wait for the backlog thread to complete and cancel all pending work. If no backlog running, any pending work that hasn't started by then will fail when invoked by sk_psock_get(), as the psock reference count have been zeroed, and sk_psock_drop() will cancel all jobs via cancel_delayed_work_sync(). In summary, we require synchronization to coordinate the backlog thread and close() thread. The panic I catched: ''' Workqueue: events sk_psock_backlog RIP: 0010:sock_sendmsg+0x21d/0x440 RAX: 0000000000000000 RBX: ffffc9000521fad8 RCX: 0000000000000001 ... Call Trace: <TASK> ? die_addr+0x40/0xa0 ? exc_general_protection+0x14c/0x230 ? asm_exc_general_protection+0x26/0x30 ? sock_sendmsg+0x21d/0x440 ? sock_sendmsg+0x3e0/0x440 ? __pfx_sock_sendmsg+0x10/0x10 __skb_send_sock+0x543/0xb70 sk_psock_backlog+0x247/0xb80 ... '''

In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Do not trigger WARN_ON() due to a commit_overrun When reading a memory mapped buffer the reader page is just swapped out with the last page written in the write buffer. If the reader page is the same as the commit buffer (the buffer that is currently being written to) it was assumed that it should never have missed events. If it does, it triggers a WARN_ON_ONCE(). But there just happens to be one scenario where this can legitimately happen. That is on a commit_overrun. A commit overrun is when an interrupt preempts an event being written to the buffer and then the interrupt adds so many new events that it fills and wraps the buffer back to the commit. Any new events would then be dropped and be reported as "missed_events". In this case, the next page to read is the commit buffer and after the swap of the reader page, the reader page will be the commit buffer, but this time there will be missed events and this triggers the following warning: ------------[ cut here ]------------ WARNING: CPU: 2 PID: 1127 at kernel/trace/ring_buffer.c:7357 ring_buffer_map_get_reader+0x49a/0x780 Modules linked in: kvm_intel kvm irqbypass CPU: 2 UID: 0 PID: 1127 Comm: trace-cmd Not tainted 6.15.0-rc7-test-00004-g478bc2824b45-dirty #564 PREEMPT Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:ring_buffer_map_get_reader+0x49a/0x780 Code: 00 00 00 48 89 fe 48 c1 ee 03 80 3c 2e 00 0f 85 ec 01 00 00 4d 3b a6 a8 00 00 00 0f 85 8a fd ff ff 48 85 c0 0f 84 55 fe ff ff <0f> 0b e9 4e fe ff ff be 08 00 00 00 4c 89 54 24 58 48 89 54 24 50 RSP: 0018:ffff888121787dc0 EFLAGS: 00010002 RAX: 00000000000006a2 RBX: ffff888100062800 RCX: ffffffff8190cb49 RDX: ffff888126934c00 RSI: 1ffff11020200a15 RDI: ffff8881010050a8 RBP: dffffc0000000000 R08: 0000000000000000 R09: ffffed1024d26982 R10: ffff888126934c17 R11: ffff8881010050a8 R12: ffff888126934c00 R13: ffff8881010050b8 R14: ffff888101005000 R15: ffff888126930008 FS: 00007f95c8cd7540(0000) GS:ffff8882b576e000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f95c8de4dc0 CR3: 0000000128452002 CR4: 0000000000172ef0 Call Trace: <TASK> ? __pfx_ring_buffer_map_get_reader+0x10/0x10 tracing_buffers_ioctl+0x283/0x370 __x64_sys_ioctl+0x134/0x190 do_syscall_64+0x79/0x1c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f95c8de48db Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 10 00 00 00 48 89 44 24 08 48 8d 44 24 20 48 89 44 24 10 b8 10 00 00 00 0f 05 <89> c2 3d 00 f0 ff ff 77 1c 48 8b 44 24 18 64 48 2b 04 25 28 00 00 RSP: 002b:00007ffe037ba110 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007ffe037bb2b0 RCX: 00007f95c8de48db RDX: 0000000000000000 RSI: 0000000000005220 RDI: 0000000000000006 RBP: 00007ffe037ba180 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffe037bb6f8 R14: 00007f95c9065000 R15: 00005575c7492c90 </TASK> irq event stamp: 5080 hardirqs last enabled at (5079): [<ffffffff83e0adb0>] _raw_spin_unlock_irqrestore+0x50/0x70 hardirqs last disabled at (5080): [<ffffffff83e0aa83>] _raw_spin_lock_irqsave+0x63/0x70 softirqs last enabled at (4182): [<ffffffff81516122>] handle_softirqs+0x552/0x710 softirqs last disabled at (4159): [<ffffffff815163f7>] __irq_exit_rcu+0x107/0x210 ---[ end trace 0000000000000000 ]--- The above was triggered by running on a kernel with both lockdep and KASAN as well as kmemleak enabled and executing the following command: # perf record -o perf-test.dat -a -- trace-cmd record --nosplice -e all -p function hackbench 50 With perf interjecting a lot of interrupts and trace-cmd enabling all events as well as function tracing, with lockdep, KASAN and kmemleak enabled, it could cause an interrupt preempting an event being written to add enough event ---truncated---

In the Linux kernel, the following vulnerability has been resolved: HID: wacom: fix crash in wacom_aes_battery_handler() Commit fd2a9b29dc9c ("HID: wacom: Remove AES power_supply after extended inactivity") introduced wacom_aes_battery_handler() which is scheduled as a delayed work (aes_battery_work). In wacom_remove(), aes_battery_work is not canceled. Consequently, if the device is removed while aes_battery_work is still pending, then hard crashes or "Oops: general protection fault..." are experienced when wacom_aes_battery_handler() is finally called. E.g., this happens with built-in USB devices after resume from hibernate when aes_battery_work was still pending at the time of hibernation. So, take care to cancel aes_battery_work in wacom_remove().

In the Linux kernel, the following vulnerability has been resolved: platform/x86: dell-wmi-sysman: Avoid buffer overflow in current_password_store() If the 'buf' array received from the user contains an empty string, the 'length' variable will be zero. Accessing the 'buf' array element with index 'length - 1' will result in a buffer overflow. Add a check for an empty string. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: jfs: Prevent copying of nlink with value 0 from disk inode syzbot report a deadlock in diFree. [1] When calling "ioctl$LOOP_SET_STATUS64", the offset value passed in is 4, which does not match the mounted loop device, causing the mapping of the mounted loop device to be invalidated. When creating the directory and creating the inode of iag in diReadSpecial(), read the page of fixed disk inode (AIT) in raw mode in read_metapage(), the metapage data it returns is corrupted, which causes the nlink value of 0 to be assigned to the iag inode when executing copy_from_dinode(), which ultimately causes a deadlock when entering diFree(). To avoid this, first check the nlink value of dinode before setting iag inode. [1] WARNING: possible recursive locking detected 6.12.0-rc7-syzkaller-00212-g4a5df3796467 #0 Not tainted -------------------------------------------- syz-executor301/5309 is trying to acquire lock: ffff888044548920 (&(imap->im_aglock[index])){+.+.}-{3:3}, at: diFree+0x37c/0x2fb0 fs/jfs/jfs_imap.c:889 but task is already holding lock: ffff888044548920 (&(imap->im_aglock[index])){+.+.}-{3:3}, at: diAlloc+0x1b6/0x1630 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(imap->im_aglock[index])); lock(&(imap->im_aglock[index])); *** DEADLOCK *** May be due to missing lock nesting notation 5 locks held by syz-executor301/5309: #0: ffff8880422a4420 (sb_writers#9){.+.+}-{0:0}, at: mnt_want_write+0x3f/0x90 fs/namespace.c:515 #1: ffff88804755b390 (&type->i_mutex_dir_key#6/1){+.+.}-{3:3}, at: inode_lock_nested include/linux/fs.h:850 [inline] #1: ffff88804755b390 (&type->i_mutex_dir_key#6/1){+.+.}-{3:3}, at: filename_create+0x260/0x540 fs/namei.c:4026 #2: ffff888044548920 (&(imap->im_aglock[index])){+.+.}-{3:3}, at: diAlloc+0x1b6/0x1630 #3: ffff888044548890 (&imap->im_freelock){+.+.}-{3:3}, at: diNewIAG fs/jfs/jfs_imap.c:2460 [inline] #3: ffff888044548890 (&imap->im_freelock){+.+.}-{3:3}, at: diAllocExt fs/jfs/jfs_imap.c:1905 [inline] #3: ffff888044548890 (&imap->im_freelock){+.+.}-{3:3}, at: diAllocAG+0x4b7/0x1e50 fs/jfs/jfs_imap.c:1669 #4: ffff88804755a618 (&jfs_ip->rdwrlock/1){++++}-{3:3}, at: diNewIAG fs/jfs/jfs_imap.c:2477 [inline] #4: ffff88804755a618 (&jfs_ip->rdwrlock/1){++++}-{3:3}, at: diAllocExt fs/jfs/jfs_imap.c:1905 [inline] #4: ffff88804755a618 (&jfs_ip->rdwrlock/1){++++}-{3:3}, at: diAllocAG+0x869/0x1e50 fs/jfs/jfs_imap.c:1669 stack backtrace: CPU: 0 UID: 0 PID: 5309 Comm: syz-executor301 Not tainted 6.12.0-rc7-syzkaller-00212-g4a5df3796467 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_deadlock_bug+0x483/0x620 kernel/locking/lockdep.c:3037 check_deadlock kernel/locking/lockdep.c:3089 [inline] validate_chain+0x15e2/0x5920 kernel/locking/lockdep.c:3891 __lock_acquire+0x1384/0x2050 kernel/locking/lockdep.c:5202 lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5825 __mutex_lock_common kernel/locking/mutex.c:608 [inline] __mutex_lock+0x136/0xd70 kernel/locking/mutex.c:752 diFree+0x37c/0x2fb0 fs/jfs/jfs_imap.c:889 jfs_evict_inode+0x32d/0x440 fs/jfs/inode.c:156 evict+0x4e8/0x9b0 fs/inode.c:725 diFreeSpecial fs/jfs/jfs_imap.c:552 [inline] duplicateIXtree+0x3c6/0x550 fs/jfs/jfs_imap.c:3022 diNewIAG fs/jfs/jfs_imap.c:2597 [inline] diAllocExt fs/jfs/jfs_imap.c:1905 [inline] diAllocAG+0x17dc/0x1e50 fs/jfs/jfs_imap.c:1669 diAlloc+0x1d2/0x1630 fs/jfs/jfs_imap.c:1590 ialloc+0x8f/0x900 fs/jfs/jfs_inode.c:56 jfs_mkdir+0x1c5/0xba0 fs/jfs/namei.c:225 vfs_mkdir+0x2f9/0x4f0 fs/namei.c:4257 do_mkdirat+0x264/0x3a0 fs/namei.c:4280 __do_sys_mkdirat fs/namei.c:4295 [inline] __se_sys_mkdirat fs/namei.c:4293 [inline] __x64_sys_mkdirat+0x87/0xa0 fs/namei.c:4293 do_syscall_x64 arch/x86/en ---truncated---

In the Linux kernel, the following vulnerability has been resolved: jfs: Fix uninit-value access of imap allocated in the diMount() function syzbot reports that hex_dump_to_buffer is using uninit-value: ===================================================== BUG: KMSAN: uninit-value in hex_dump_to_buffer+0x888/0x1100 lib/hexdump.c:171 hex_dump_to_buffer+0x888/0x1100 lib/hexdump.c:171 print_hex_dump+0x13d/0x3e0 lib/hexdump.c:276 diFree+0x5ba/0x4350 fs/jfs/jfs_imap.c:876 jfs_evict_inode+0x510/0x550 fs/jfs/inode.c:156 evict+0x723/0xd10 fs/inode.c:796 iput_final fs/inode.c:1946 [inline] iput+0x97b/0xdb0 fs/inode.c:1972 txUpdateMap+0xf3e/0x1150 fs/jfs/jfs_txnmgr.c:2367 txLazyCommit fs/jfs/jfs_txnmgr.c:2664 [inline] jfs_lazycommit+0x627/0x11d0 fs/jfs/jfs_txnmgr.c:2733 kthread+0x6b9/0xef0 kernel/kthread.c:464 ret_from_fork+0x6d/0x90 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 Uninit was created at: slab_post_alloc_hook mm/slub.c:4121 [inline] slab_alloc_node mm/slub.c:4164 [inline] __kmalloc_cache_noprof+0x8e3/0xdf0 mm/slub.c:4320 kmalloc_noprof include/linux/slab.h:901 [inline] diMount+0x61/0x7f0 fs/jfs/jfs_imap.c:105 jfs_mount+0xa8e/0x11d0 fs/jfs/jfs_mount.c:176 jfs_fill_super+0xa47/0x17c0 fs/jfs/super.c:523 get_tree_bdev_flags+0x6ec/0x910 fs/super.c:1636 get_tree_bdev+0x37/0x50 fs/super.c:1659 jfs_get_tree+0x34/0x40 fs/jfs/super.c:635 vfs_get_tree+0xb1/0x5a0 fs/super.c:1814 do_new_mount+0x71f/0x15e0 fs/namespace.c:3560 path_mount+0x742/0x1f10 fs/namespace.c:3887 do_mount fs/namespace.c:3900 [inline] __do_sys_mount fs/namespace.c:4111 [inline] __se_sys_mount+0x71f/0x800 fs/namespace.c:4088 __x64_sys_mount+0xe4/0x150 fs/namespace.c:4088 x64_sys_call+0x39bf/0x3c30 arch/x86/include/generated/asm/syscalls_64.h:166 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f ===================================================== The reason is that imap is not properly initialized after memory allocation. It will cause the snprintf() function to write uninitialized data into linebuf within hex_dump_to_buffer(). Fix this by using kzalloc instead of kmalloc to clear its content at the beginning in diMount().

In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: prime: fix ttm_bo_delayed_delete oops Fix an oops in ttm_bo_delayed_delete which results from dererencing a dangling pointer: Oops: general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6b7b: 0000 [#1] PREEMPT SMP CPU: 4 UID: 0 PID: 1082 Comm: kworker/u65:2 Not tainted 6.14.0-rc4-00267-g505460b44513-dirty #216 Hardware name: LENOVO 82N6/LNVNB161216, BIOS GKCN65WW 01/16/2024 Workqueue: ttm ttm_bo_delayed_delete [ttm] RIP: 0010:dma_resv_iter_first_unlocked+0x55/0x290 Code: 31 f6 48 c7 c7 00 2b fa aa e8 97 bd 52 ff e8 a2 c1 53 00 5a 85 c0 74 48 e9 88 01 00 00 4c 89 63 20 4d 85 e4 0f 84 30 01 00 00 <41> 8b 44 24 10 c6 43 2c 01 48 89 df 89 43 28 e8 97 fd ff ff 4c 8b RSP: 0018:ffffbf9383473d60 EFLAGS: 00010202 RAX: 0000000000000001 RBX: ffffbf9383473d88 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffbf9383473d78 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 6b6b6b6b6b6b6b6b R13: ffffa003bbf78580 R14: ffffa003a6728040 R15: 00000000000383cc FS: 0000000000000000(0000) GS:ffffa00991c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000758348024dd0 CR3: 000000012c259000 CR4: 0000000000f50ef0 PKRU: 55555554 Call Trace: <TASK> ? __die_body.cold+0x19/0x26 ? die_addr+0x3d/0x70 ? exc_general_protection+0x159/0x460 ? asm_exc_general_protection+0x27/0x30 ? dma_resv_iter_first_unlocked+0x55/0x290 dma_resv_wait_timeout+0x56/0x100 ttm_bo_delayed_delete+0x69/0xb0 [ttm] process_one_work+0x217/0x5c0 worker_thread+0x1c8/0x3d0 ? apply_wqattrs_cleanup.part.0+0xc0/0xc0 kthread+0x10b/0x240 ? kthreads_online_cpu+0x140/0x140 ret_from_fork+0x40/0x70 ? kthreads_online_cpu+0x140/0x140 ret_from_fork_asm+0x11/0x20 </TASK> The cause of this is: - drm_prime_gem_destroy calls dma_buf_put(dma_buf) which releases the reference to the shared dma_buf. The reference count is 0, so the dma_buf is destroyed, which in turn decrements the corresponding amdgpu_bo reference count to 0, and the amdgpu_bo is destroyed - calling drm_gem_object_release then dma_resv_fini (which destroys the reservation object), then finally freeing the amdgpu_bo. - nouveau_bo obj->bo.base.resv is now a dangling pointer to the memory formerly allocated to the amdgpu_bo. - nouveau_gem_object_del calls ttm_bo_put(&nvbo->bo) which calls ttm_bo_release, which schedules ttm_bo_delayed_delete. - ttm_bo_delayed_delete runs and dereferences the dangling resv pointer, resulting in a general protection fault. Fix this by moving the drm_prime_gem_destroy call from nouveau_gem_object_del to nouveau_bo_del_ttm. This ensures that it will be run after ttm_bo_delayed_delete.

In the Linux kernel, the following vulnerability has been resolved: arm64: bpf: Only mitigate cBPF programs loaded by unprivileged users Support for eBPF programs loaded by unprivileged users is typically disabled. This means only cBPF programs need to be mitigated for BHB. In addition, only mitigate cBPF programs that were loaded by an unprivileged user. Privileged users can also load the same program via eBPF, making the mitigation pointless.

In the Linux kernel, the following vulnerability has been resolved: tcp_bpf: Call sk_msg_free() when tcp_bpf_send_verdict() fails to allocate psock->cork. syzbot reported the splat below. [0] The repro does the following: 1. Load a sk_msg prog that calls bpf_msg_cork_bytes(msg, cork_bytes) 2. Attach the prog to a SOCKMAP 3. Add a socket to the SOCKMAP 4. Activate fault injection 5. Send data less than cork_bytes At 5., the data is carried over to the next sendmsg() as it is smaller than the cork_bytes specified by bpf_msg_cork_bytes(). Then, tcp_bpf_send_verdict() tries to allocate psock->cork to hold the data, but this fails silently due to fault injection + __GFP_NOWARN. If the allocation fails, we need to revert the sk->sk_forward_alloc change done by sk_msg_alloc(). Let's call sk_msg_free() when tcp_bpf_send_verdict fails to allocate psock->cork. The "*copied" also needs to be updated such that a proper error can be returned to the caller, sendmsg. It fails to allocate psock->cork. Nothing has been corked so far, so this patch simply sets "*copied" to 0. [0]: WARNING: net/ipv4/af_inet.c:156 at inet_sock_destruct+0x623/0x730 net/ipv4/af_inet.c:156, CPU#1: syz-executor/5983 Modules linked in: CPU: 1 UID: 0 PID: 5983 Comm: syz-executor Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/12/2025 RIP: 0010:inet_sock_destruct+0x623/0x730 net/ipv4/af_inet.c:156 Code: 0f 0b 90 e9 62 fe ff ff e8 7a db b5 f7 90 0f 0b 90 e9 95 fe ff ff e8 6c db b5 f7 90 0f 0b 90 e9 bb fe ff ff e8 5e db b5 f7 90 <0f> 0b 90 e9 e1 fe ff ff 89 f9 80 e1 07 80 c1 03 38 c1 0f 8c 9f fc RSP: 0018:ffffc90000a08b48 EFLAGS: 00010246 RAX: ffffffff8a09d0b2 RBX: dffffc0000000000 RCX: ffff888024a23c80 RDX: 0000000000000100 RSI: 0000000000000fff RDI: 0000000000000000 RBP: 0000000000000fff R08: ffff88807e07c627 R09: 1ffff1100fc0f8c4 R10: dffffc0000000000 R11: ffffed100fc0f8c5 R12: ffff88807e07c380 R13: dffffc0000000000 R14: ffff88807e07c60c R15: 1ffff1100fc0f872 FS: 00005555604c4500(0000) GS:ffff888125af1000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005555604df5c8 CR3: 0000000032b06000 CR4: 00000000003526f0 Call Trace: <IRQ> __sk_destruct+0x86/0x660 net/core/sock.c:2339 rcu_do_batch kernel/rcu/tree.c:2605 [inline] rcu_core+0xca8/0x1770 kernel/rcu/tree.c:2861 handle_softirqs+0x286/0x870 kernel/softirq.c:579 __do_softirq kernel/softirq.c:613 [inline] invoke_softirq kernel/softirq.c:453 [inline] __irq_exit_rcu+0xca/0x1f0 kernel/softirq.c:680 irq_exit_rcu+0x9/0x30 kernel/softirq.c:696 instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1052 [inline] sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1052 </IRQ>

IBM QRadar 7.3.0 to 7.3.3 Patch 2 could allow a local user to gain escalated privileges due to weak file permissions. IBM X-ForceID: 175846.

IBM DB2 for Linux, UNIX and Windows (includes DB2 Connect Server) 9.7, 10.1, 10.5, 11.1, and 11.5 could allow local attacker to cause a denial of service inside the "DB2 Management Service".

In the Linux kernel, the following vulnerability has been resolved: io_uring/futex: ensure io_futex_wait() cleans up properly on failure The io_futex_data is allocated upfront and assigned to the io_kiocb async_data field, but the request isn't marked with REQ_F_ASYNC_DATA at that point. Those two should always go together, as the flag tells io_uring whether the field is valid or not. Additionally, on failure cleanup, the futex handler frees the data but does not clear ->async_data. Clear the data and the flag in the error path as well. Thanks to Trend Micro Zero Day Initiative and particularly ReDress for reporting this.

In the Linux kernel, the following vulnerability has been resolved: EDAC/skx_common: Fix general protection fault After loading i10nm_edac (which automatically loads skx_edac_common), if unload only i10nm_edac, then reload it and perform error injection testing, a general protection fault may occur: mce: [Hardware Error]: Machine check events logged Oops: general protection fault ... ... Workqueue: events mce_gen_pool_process RIP: 0010:string+0x53/0xe0 ... Call Trace: <TASK> ? die_addr+0x37/0x90 ? exc_general_protection+0x1e7/0x3f0 ? asm_exc_general_protection+0x26/0x30 ? string+0x53/0xe0 vsnprintf+0x23e/0x4c0 snprintf+0x4d/0x70 skx_adxl_decode+0x16a/0x330 [skx_edac_common] skx_mce_check_error.part.0+0xf8/0x220 [skx_edac_common] skx_mce_check_error+0x17/0x20 [skx_edac_common] ... The issue arose was because the variable 'adxl_component_count' (inside skx_edac_common), which counts the ADXL components, was not reset. During the reloading of i10nm_edac, the count was incremented by the actual number of ADXL components again, resulting in a count that was double the real number of ADXL components. This led to an out-of-bounds reference to the ADXL component array, causing the general protection fault above. Fix this issue by resetting the 'adxl_component_count' in adxl_put(), which is called during the unloading of {skx,i10nm}_edac.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: fix double free in 'hci_discovery_filter_clear()' Function 'hci_discovery_filter_clear()' frees 'uuids' array and then sets it to NULL. There is a tiny chance of the following race: 'hci_cmd_sync_work()' 'update_passive_scan_sync()' 'hci_update_passive_scan_sync()' 'hci_discovery_filter_clear()' kfree(uuids); <-------------------------preempted--------------------------------> 'start_service_discovery()' 'hci_discovery_filter_clear()' kfree(uuids); // DOUBLE FREE <-------------------------preempted--------------------------------> uuids = NULL; To fix it let's add locking around 'kfree()' call and NULL pointer assignment. Otherwise the following backtrace fires: [ ] ------------[ cut here ]------------ [ ] kernel BUG at mm/slub.c:547! [ ] Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP [ ] CPU: 3 UID: 0 PID: 246 Comm: bluetoothd Tainted: G O 6.12.19-kernel #1 [ ] Tainted: [O]=OOT_MODULE [ ] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ ] pc : __slab_free+0xf8/0x348 [ ] lr : __slab_free+0x48/0x348 ... [ ] Call trace: [ ] __slab_free+0xf8/0x348 [ ] kfree+0x164/0x27c [ ] start_service_discovery+0x1d0/0x2c0 [ ] hci_sock_sendmsg+0x518/0x924 [ ] __sock_sendmsg+0x54/0x60 [ ] sock_write_iter+0x98/0xf8 [ ] do_iter_readv_writev+0xe4/0x1c8 [ ] vfs_writev+0x128/0x2b0 [ ] do_writev+0xfc/0x118 [ ] __arm64_sys_writev+0x20/0x2c [ ] invoke_syscall+0x68/0xf0 [ ] el0_svc_common.constprop.0+0x40/0xe0 [ ] do_el0_svc+0x1c/0x28 [ ] el0_svc+0x30/0xd0 [ ] el0t_64_sync_handler+0x100/0x12c [ ] el0t_64_sync+0x194/0x198 [ ] Code: 8b0002e6 eb17031f 54fffbe1 d503201f (d4210000) [ ] ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: cpufreq: Init completion before kobject_init_and_add() In cpufreq_policy_alloc(), it will call uninitialed completion in cpufreq_sysfs_release() when kobject_init_and_add() fails. And that will cause a crash such as the following page fault in complete: BUG: unable to handle page fault for address: fffffffffffffff8 [..] RIP: 0010:complete+0x98/0x1f0 [..] Call Trace: kobject_put+0x1be/0x4c0 cpufreq_online.cold+0xee/0x1fd cpufreq_add_dev+0x183/0x1e0 subsys_interface_register+0x3f5/0x4e0 cpufreq_register_driver+0x3b7/0x670 acpi_cpufreq_init+0x56c/0x1000 [acpi_cpufreq] do_one_initcall+0x13d/0x780 do_init_module+0x1c3/0x630 load_module+0x6e67/0x73b0 __do_sys_finit_module+0x181/0x240 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd

In the Linux kernel, the following vulnerability has been resolved: media: ti: j721e-csi2rx: fix list_del corruption If ti_csi2rx_start_dma() fails in ti_csi2rx_dma_callback(), the buffer is marked done with VB2_BUF_STATE_ERROR but is not removed from the DMA queue. This causes the same buffer to be retried in the next iteration, resulting in a double list_del() and eventual list corruption. Fix this by removing the buffer from the queue before calling vb2_buffer_done() on error. This resolves a crash due to list_del corruption: [ 37.811243] j721e-csi2rx 30102000.ticsi2rx: Failed to queue the next buffer for DMA [ 37.832187] slab kmalloc-2k start ffff00000255b000 pointer offset 1064 size 2048 [ 37.839761] list_del corruption. next->prev should be ffff00000255bc28, but was ffff00000255d428. (next=ffff00000255b428) [ 37.850799] ------------[ cut here ]------------ [ 37.855424] kernel BUG at lib/list_debug.c:65! [ 37.859876] Internal error: Oops - BUG: 00000000f2000800 [#1] SMP [ 37.866061] Modules linked in: i2c_dev usb_f_rndis u_ether libcomposite dwc3 udc_core usb_common aes_ce_blk aes_ce_cipher ghash_ce gf128mul sha1_ce cpufreq_dt dwc3_am62 phy_gmii_sel sa2ul [ 37.882830] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.16.0-rc3+ #28 VOLUNTARY [ 37.890851] Hardware name: Bosch STLA-GSRV2-B0 (DT) [ 37.895737] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 37.902703] pc : __list_del_entry_valid_or_report+0xdc/0x114 [ 37.908390] lr : __list_del_entry_valid_or_report+0xdc/0x114 [ 37.914059] sp : ffff800080003db0 [ 37.917375] x29: ffff800080003db0 x28: 0000000000000007 x27: ffff800080e50000 [ 37.924521] x26: 0000000000000000 x25: ffff0000016abb50 x24: dead000000000122 [ 37.931666] x23: ffff0000016abb78 x22: ffff0000016ab080 x21: ffff800080003de0 [ 37.938810] x20: ffff00000255bc00 x19: ffff00000255b800 x18: 000000000000000a [ 37.945956] x17: 20747562202c3832 x16: 6362353532303030 x15: 0720072007200720 [ 37.953101] x14: 0720072007200720 x13: 0720072007200720 x12: 00000000ffffffea [ 37.960248] x11: ffff800080003b18 x10: 00000000ffffefff x9 : ffff800080f5b568 [ 37.967396] x8 : ffff800080f5b5c0 x7 : 0000000000017fe8 x6 : c0000000ffffefff [ 37.974542] x5 : ffff00000fea6688 x4 : 0000000000000000 x3 : 0000000000000000 [ 37.981686] x2 : 0000000000000000 x1 : ffff800080ef2b40 x0 : 000000000000006d [ 37.988832] Call trace: [ 37.991281] __list_del_entry_valid_or_report+0xdc/0x114 (P) [ 37.996959] ti_csi2rx_dma_callback+0x84/0x1c4 [ 38.001419] udma_vchan_complete+0x1e0/0x344 [ 38.005705] tasklet_action_common+0x118/0x310 [ 38.010163] tasklet_action+0x30/0x3c [ 38.013832] handle_softirqs+0x10c/0x2e0 [ 38.017761] __do_softirq+0x14/0x20 [ 38.021256] ____do_softirq+0x10/0x20 [ 38.024931] call_on_irq_stack+0x24/0x60 [ 38.028873] do_softirq_own_stack+0x1c/0x40 [ 38.033064] __irq_exit_rcu+0x130/0x15c [ 38.036909] irq_exit_rcu+0x10/0x20 [ 38.040403] el1_interrupt+0x38/0x60 [ 38.043987] el1h_64_irq_handler+0x18/0x24 [ 38.048091] el1h_64_irq+0x6c/0x70 [ 38.051501] default_idle_call+0x34/0xe0 (P) [ 38.055783] do_idle+0x1f8/0x250 [ 38.059021] cpu_startup_entry+0x34/0x3c [ 38.062951] rest_init+0xb4/0xc0 [ 38.066186] console_on_rootfs+0x0/0x6c [ 38.070031] __primary_switched+0x88/0x90 [ 38.074059] Code: b00037e0 91378000 f9400462 97e9bf49 (d4210000) [ 38.080168] ---[ end trace 0000000000000000 ]--- [ 38.084795] Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt [ 38.092197] SMP: stopping secondary CPUs [ 38.096139] Kernel Offset: disabled [ 38.099631] CPU features: 0x0000,00002000,02000801,0400420b [ 38.105202] Memory Limit: none [ 38.108260] ---[ end Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt ]---

Vasion Print (formerly PrinterLogic) Virtual Appliance Host versions prior to 1.0.735 and Application versions prior to 20.0.1330 (macOS/Linux client deployments) contain a vulnerability in the local inter-process communication (IPC) mechanism. The software stores IPC request and response files inside /opt/PrinterInstallerClient/tmp with world-readable and world-writable permissions. Any local user can craft malicious request files that are processed by privileged daemons, leading to unauthorized actions being executed in other user sessions. This breaks user session isolation, potentially allowing local attackers to hijack sessions, perform unintended actions in the context of other users, and impact system integrity and availability. This vulnerability has been identified by the vendor as: V-2022-004 — Client Inter-process Security.

Vasion Print (formerly PrinterLogic) Virtual Appliance Host versions prior to 1.0.735 and Application prior to 20.0.1330 (macOS/Linux client deployments) contain a vulnerability in the local logging mechanism. Authentication session tokens, including PHPSESSID, XSRF-TOKEN, and laravel_session, are stored in cleartext within world-readable log files. Any local user with access to the machine can extract these session tokens and use them to authenticate remotely to the SaaS environment, bypassing normal login credentials, potentially leading to unauthorized system access and exposure of sensitive information. This vulnerability has been identified by the vendor as: V-2022-008 — Secrets Leaked in Logs.

In the Linux kernel, the following vulnerability has been resolved: virtio-net: ensure the received length does not exceed allocated size In xdp_linearize_page, when reading the following buffers from the ring, we forget to check the received length with the true allocate size. This can lead to an out-of-bound read. This commit adds that missing check.

In the Linux kernel, the following vulnerability has been resolved: mm/damon/ops-common: ignore migration request to invalid nodes damon_migrate_pages() tries migration even if the target node is invalid. If users mistakenly make such invalid requests via DAMOS_MIGRATE_{HOT,COLD} action, the below kernel BUG can happen. [ 7831.883495] BUG: unable to handle page fault for address: 0000000000001f48 [ 7831.884160] #PF: supervisor read access in kernel mode [ 7831.884681] #PF: error_code(0x0000) - not-present page [ 7831.885203] PGD 0 P4D 0 [ 7831.885468] Oops: Oops: 0000 [#1] SMP PTI [ 7831.885852] CPU: 31 UID: 0 PID: 94202 Comm: kdamond.0 Not tainted 6.16.0-rc5-mm-new-damon+ #93 PREEMPT(voluntary) [ 7831.886913] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-4.el9 04/01/2014 [ 7831.887777] RIP: 0010:__alloc_frozen_pages_noprof (include/linux/mmzone.h:1724 include/linux/mmzone.h:1750 mm/page_alloc.c:4936 mm/page_alloc.c:5137) [...] [ 7831.895953] Call Trace: [ 7831.896195] <TASK> [ 7831.896397] __folio_alloc_noprof (mm/page_alloc.c:5183 mm/page_alloc.c:5192) [ 7831.896787] migrate_pages_batch (mm/migrate.c:1189 mm/migrate.c:1851) [ 7831.897228] ? __pfx_alloc_migration_target (mm/migrate.c:2137) [ 7831.897735] migrate_pages (mm/migrate.c:2078) [ 7831.898141] ? __pfx_alloc_migration_target (mm/migrate.c:2137) [ 7831.898664] damon_migrate_folio_list (mm/damon/ops-common.c:321 mm/damon/ops-common.c:354) [ 7831.899140] damon_migrate_pages (mm/damon/ops-common.c:405) [...] Add a target node validity check in damon_migrate_pages(). The validity check is stolen from that of do_pages_move(), which is being used for the move_pages() system call.

In the Linux kernel, the following vulnerability has been resolved: fs/binfmt_elf: Fix memory leak in load_elf_binary() There is a memory leak reported by kmemleak: unreferenced object 0xffff88817104ef80 (size 224): comm "xfs_admin", pid 47165, jiffies 4298708825 (age 1333.476s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 60 a8 b3 00 81 88 ff ff a8 10 5a 00 81 88 ff ff `.........Z..... backtrace: [<ffffffff819171e1>] __alloc_file+0x21/0x250 [<ffffffff81918061>] alloc_empty_file+0x41/0xf0 [<ffffffff81948cda>] path_openat+0xea/0x3d30 [<ffffffff8194ec89>] do_filp_open+0x1b9/0x290 [<ffffffff8192660e>] do_open_execat+0xce/0x5b0 [<ffffffff81926b17>] open_exec+0x27/0x50 [<ffffffff81a69250>] load_elf_binary+0x510/0x3ed0 [<ffffffff81927759>] bprm_execve+0x599/0x1240 [<ffffffff8192a997>] do_execveat_common.isra.0+0x4c7/0x680 [<ffffffff8192b078>] __x64_sys_execve+0x88/0xb0 [<ffffffff83bbf0a5>] do_syscall_64+0x35/0x80 If "interp_elf_ex" fails to allocate memory in load_elf_binary(), the program will take the "out_free_ph" error handing path, resulting in "interpreter" file resource is not released. Fix it by adding an error handing path "out_free_file", which will release the file resource when "interp_elf_ex" failed to allocate memory.

In the Linux kernel, the following vulnerability has been resolved: mm/damon/sysfs: fix use-after-free in state_show() state_show() reads kdamond->damon_ctx without holding damon_sysfs_lock. This allows a use-after-free race: CPU 0 CPU 1 ----- ----- state_show() damon_sysfs_turn_damon_on() ctx = kdamond->damon_ctx; mutex_lock(&damon_sysfs_lock); damon_destroy_ctx(kdamond->damon_ctx); kdamond->damon_ctx = NULL; mutex_unlock(&damon_sysfs_lock); damon_is_running(ctx); /* ctx is freed */ mutex_lock(&ctx->kdamond_lock); /* UAF */ (The race can also occur with damon_sysfs_kdamonds_rm_dirs() and damon_sysfs_kdamond_release(), which free or replace the context under damon_sysfs_lock.) Fix by taking damon_sysfs_lock before dereferencing the context, mirroring the locking used in pid_show(). The bug has existed since state_show() first accessed kdamond->damon_ctx.

In the Linux kernel, the following vulnerability has been resolved: efivarfs: Fix memory leak of efivarfs_fs_info in fs_context error paths When processing mount options, efivarfs allocates efivarfs_fs_info (sfi) early in fs_context initialization. However, sfi is associated with the superblock and typically freed when the superblock is destroyed. If the fs_context is released (final put) before fill_super is called—such as on error paths or during reconfiguration—the sfi structure would leak, as ownership never transfers to the superblock. Implement the .free callback in efivarfs_context_ops to ensure any allocated sfi is properly freed if the fs_context is torn down before fill_super, preventing this memory leak.

In the Linux kernel, the following vulnerability has been resolved: dm thin: fix use-after-free crash in dm_sm_register_threshold_callback Fault inject on pool metadata device reports: BUG: KASAN: use-after-free in dm_pool_register_metadata_threshold+0x40/0x80 Read of size 8 at addr ffff8881b9d50068 by task dmsetup/950 CPU: 7 PID: 950 Comm: dmsetup Tainted: G W 5.19.0-rc6 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x34/0x44 print_address_description.constprop.0.cold+0xeb/0x3f4 kasan_report.cold+0xe6/0x147 dm_pool_register_metadata_threshold+0x40/0x80 pool_ctr+0xa0a/0x1150 dm_table_add_target+0x2c8/0x640 table_load+0x1fd/0x430 ctl_ioctl+0x2c4/0x5a0 dm_ctl_ioctl+0xa/0x10 __x64_sys_ioctl+0xb3/0xd0 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 This can be easily reproduced using: echo offline > /sys/block/sda/device/state dd if=/dev/zero of=/dev/mapper/thin bs=4k count=10 dmsetup load pool --table "0 20971520 thin-pool /dev/sda /dev/sdb 128 0 0" If a metadata commit fails, the transaction will be aborted and the metadata space maps will be destroyed. If a DM table reload then happens for this failed thin-pool, a use-after-free will occur in dm_sm_register_threshold_callback (called from dm_pool_register_metadata_threshold). Fix this by in dm_pool_register_metadata_threshold() by returning the -EINVAL error if the thin-pool is in fail mode. Also fail pool_ctr() with a new error message: "Error registering metadata threshold".

In the Linux kernel, the following vulnerability has been resolved: sock: redo the psock vs ULP protection check Commit 8a59f9d1e3d4 ("sock: Introduce sk->sk_prot->psock_update_sk_prot()") has moved the inet_csk_has_ulp(sk) check from sk_psock_init() to the new tcp_bpf_update_proto() function. I'm guessing that this was done to allow creating psocks for non-inet sockets. Unfortunately the destruction path for psock includes the ULP unwind, so we need to fail the sk_psock_init() itself. Otherwise if ULP is already present we'll notice that later, and call tcp_update_ulp() with the sk_proto of the ULP itself, which will most likely result in the ULP looping its callbacks.

In the Linux kernel, the following vulnerability has been resolved: arm64: compat: Do not treat syscall number as ESR_ELx for a bad syscall If a compat process tries to execute an unknown system call above the __ARM_NR_COMPAT_END number, the kernel sends a SIGILL signal to the offending process. Information about the error is printed to dmesg in compat_arm_syscall() -> arm64_notify_die() -> arm64_force_sig_fault() -> arm64_show_signal(). arm64_show_signal() interprets a non-zero value for current->thread.fault_code as an exception syndrome and displays the message associated with the ESR_ELx.EC field (bits 31:26). current->thread.fault_code is set in compat_arm_syscall() -> arm64_notify_die() with the bad syscall number instead of a valid ESR_ELx value. This means that the ESR_ELx.EC field has the value that the user set for the syscall number and the kernel can end up printing bogus exception messages*. For example, for the syscall number 0x68000000, which evaluates to ESR_ELx.EC value of 0x1A (ESR_ELx_EC_FPAC) the kernel prints this error: [ 18.349161] syscall[300]: unhandled exception: ERET/ERETAA/ERETAB, ESR 0x68000000, Oops - bad compat syscall(2) in syscall[10000+50000] [ 18.350639] CPU: 2 PID: 300 Comm: syscall Not tainted 5.18.0-rc1 #79 [ 18.351249] Hardware name: Pine64 RockPro64 v2.0 (DT) [..] which is misleading, as the bad compat syscall has nothing to do with pointer authentication. Stop arm64_show_signal() from printing exception syndrome information by having compat_arm_syscall() set the ESR_ELx value to 0, as it has no meaning for an invalid system call number. The example above now becomes: [ 19.935275] syscall[301]: unhandled exception: Oops - bad compat syscall(2) in syscall[10000+50000] [ 19.936124] CPU: 1 PID: 301 Comm: syscall Not tainted 5.18.0-rc1-00005-g7e08006d4102 #80 [ 19.936894] Hardware name: Pine64 RockPro64 v2.0 (DT) [..] which although shows less information because the syscall number, wrongfully advertised as the ESR value, is missing, it is better than showing plainly wrong information. The syscall number can be easily obtained with strace. *A 32-bit value above or equal to 0x8000_0000 is interpreted as a negative integer in compat_arm_syscal() and the condition scno < __ARM_NR_COMPAT_END evaluates to true; the syscall will exit to userspace in this case with the ENOSYS error code instead of arm64_notify_die() being called.

In the Linux kernel, the following vulnerability has been resolved: drm/meson: reorder driver deinit sequence to fix use-after-free bug Unloading the driver triggers the following KASAN warning: [ +0.006275] ============================================================= [ +0.000029] BUG: KASAN: use-after-free in __list_del_entry_valid+0xe0/0x1a0 [ +0.000026] Read of size 8 at addr ffff000020c395e0 by task rmmod/2695 [ +0.000019] CPU: 5 PID: 2695 Comm: rmmod Tainted: G C O 5.19.0-rc6-lrmbkasan+ #1 [ +0.000013] Hardware name: Hardkernel ODROID-N2Plus (DT) [ +0.000008] Call trace: [ +0.000007] dump_backtrace+0x1ec/0x280 [ +0.000013] show_stack+0x24/0x80 [ +0.000008] dump_stack_lvl+0x98/0xd4 [ +0.000011] print_address_description.constprop.0+0x80/0x520 [ +0.000011] print_report+0x128/0x260 [ +0.000007] kasan_report+0xb8/0xfc [ +0.000008] __asan_report_load8_noabort+0x3c/0x50 [ +0.000010] __list_del_entry_valid+0xe0/0x1a0 [ +0.000009] drm_atomic_private_obj_fini+0x30/0x200 [drm] [ +0.000172] drm_bridge_detach+0x94/0x260 [drm] [ +0.000145] drm_encoder_cleanup+0xa4/0x290 [drm] [ +0.000144] drm_mode_config_cleanup+0x118/0x740 [drm] [ +0.000143] drm_mode_config_init_release+0x1c/0x2c [drm] [ +0.000144] drm_managed_release+0x170/0x414 [drm] [ +0.000142] drm_dev_put.part.0+0xc0/0x124 [drm] [ +0.000143] drm_dev_put+0x20/0x30 [drm] [ +0.000142] meson_drv_unbind+0x1d8/0x2ac [meson_drm] [ +0.000028] take_down_aggregate_device+0xb0/0x160 [ +0.000016] component_del+0x18c/0x360 [ +0.000009] meson_dw_hdmi_remove+0x28/0x40 [meson_dw_hdmi] [ +0.000015] platform_remove+0x64/0xb0 [ +0.000009] device_remove+0xb8/0x154 [ +0.000009] device_release_driver_internal+0x398/0x5b0 [ +0.000009] driver_detach+0xac/0x1b0 [ +0.000009] bus_remove_driver+0x158/0x29c [ +0.000009] driver_unregister+0x70/0xb0 [ +0.000008] platform_driver_unregister+0x20/0x2c [ +0.000008] meson_dw_hdmi_platform_driver_exit+0x1c/0x30 [meson_dw_hdmi] [ +0.000012] __do_sys_delete_module+0x288/0x400 [ +0.000011] __arm64_sys_delete_module+0x5c/0x80 [ +0.000009] invoke_syscall+0x74/0x260 [ +0.000009] el0_svc_common.constprop.0+0xcc/0x260 [ +0.000009] do_el0_svc+0x50/0x70 [ +0.000007] el0_svc+0x68/0x1a0 [ +0.000012] el0t_64_sync_handler+0x11c/0x150 [ +0.000008] el0t_64_sync+0x18c/0x190 [ +0.000018] Allocated by task 0: [ +0.000007] (stack is not available) [ +0.000011] Freed by task 2695: [ +0.000008] kasan_save_stack+0x2c/0x5c [ +0.000011] kasan_set_track+0x2c/0x40 [ +0.000008] kasan_set_free_info+0x28/0x50 [ +0.000009] ____kasan_slab_free+0x128/0x1d4 [ +0.000008] __kasan_slab_free+0x18/0x24 [ +0.000007] slab_free_freelist_hook+0x108/0x230 [ +0.000011] kfree+0x110/0x35c [ +0.000008] release_nodes+0xf0/0x16c [ +0.000009] devres_release_group+0x180/0x270 [ +0.000008] component_unbind+0x128/0x1e0 [ +0.000010] component_unbind_all+0x1b8/0x264 [ +0.000009] meson_drv_unbind+0x1a0/0x2ac [meson_drm] [ +0.000025] take_down_aggregate_device+0xb0/0x160 [ +0.000009] component_del+0x18c/0x360 [ +0.000009] meson_dw_hdmi_remove+0x28/0x40 [meson_dw_hdmi] [ +0.000012] platform_remove+0x64/0xb0 [ +0.000008] device_remove+0xb8/0x154 [ +0.000009] device_release_driver_internal+0x398/0x5b0 [ +0.000009] driver_detach+0xac/0x1b0 [ +0.000009] bus_remove_driver+0x158/0x29c [ +0.000008] driver_unregister+0x70/0xb0 [ +0.000008] platform_driver_unregister+0x20/0x2c [ +0.000008] meson_dw_hdmi_platform_driver_exit+0x1c/0x30 [meson_dw_hdmi] [ +0.000011] __do_sys_delete_module+0x288/0x400 [ +0.000010] __arm64_sys_delete_module+0x5c/0x80 [ +0.000008] invoke_syscall+0x74/0x260 [ +0.000008] el0_svc_common.constprop.0+0xcc/0x260 [ +0.000008] do_el0_svc+0x50/0x70 [ +0.000007] el0_svc+0x68/0x1a0 [ +0.000009] el0t_64_sync_handler+0x11c/0x150 [ +0.000009] el0t_64_sync+0x18c/0x190 [ +0.000014] The buggy address belongs to the object at ffff000020c39000 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix deadlock between concurrent dio writes when low on free data space When reserving data space for a direct IO write we can end up deadlocking if we have multiple tasks attempting a write to the same file range, there are multiple extents covered by that file range, we are low on available space for data and the writes don't expand the inode's i_size. The deadlock can happen like this: 1) We have a file with an i_size of 1M, at offset 0 it has an extent with a size of 128K and at offset 128K it has another extent also with a size of 128K; 2) Task A does a direct IO write against file range [0, 256K), and because the write is within the i_size boundary, it takes the inode's lock (VFS level) in shared mode; 3) Task A locks the file range [0, 256K) at btrfs_dio_iomap_begin(), and then gets the extent map for the extent covering the range [0, 128K). At btrfs_get_blocks_direct_write(), it creates an ordered extent for that file range ([0, 128K)); 4) Before returning from btrfs_dio_iomap_begin(), it unlocks the file range [0, 256K); 5) Task A executes btrfs_dio_iomap_begin() again, this time for the file range [128K, 256K), and locks the file range [128K, 256K); 6) Task B starts a direct IO write against file range [0, 256K) as well. It also locks the inode in shared mode, as it's within the i_size limit, and then tries to lock file range [0, 256K). It is able to lock the subrange [0, 128K) but then blocks waiting for the range [128K, 256K), as it is currently locked by task A; 7) Task A enters btrfs_get_blocks_direct_write() and tries to reserve data space. Because we are low on available free space, it triggers the async data reclaim task, and waits for it to reserve data space; 8) The async reclaim task decides to wait for all existing ordered extents to complete (through btrfs_wait_ordered_roots()). It finds the ordered extent previously created by task A for the file range [0, 128K) and waits for it to complete; 9) The ordered extent for the file range [0, 128K) can not complete because it blocks at btrfs_finish_ordered_io() when trying to lock the file range [0, 128K). This results in a deadlock, because: - task B is holding the file range [0, 128K) locked, waiting for the range [128K, 256K) to be unlocked by task A; - task A is holding the file range [128K, 256K) locked and it's waiting for the async data reclaim task to satisfy its space reservation request; - the async data reclaim task is waiting for ordered extent [0, 128K) to complete, but the ordered extent can not complete because the file range [0, 128K) is currently locked by task B, which is waiting on task A to unlock file range [128K, 256K) and task A waiting on the async data reclaim task. This results in a deadlock between 4 task: task A, task B, the async data reclaim task and the task doing ordered extent completion (a work queue task). This type of deadlock can sporadically be triggered by the test case generic/300 from fstests, and results in a stack trace like the following: [12084.033689] INFO: task kworker/u16:7:123749 blocked for more than 241 seconds. [12084.034877] Not tainted 5.18.0-rc2-btrfs-next-115 #1 [12084.035562] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [12084.036548] task:kworker/u16:7 state:D stack: 0 pid:123749 ppid: 2 flags:0x00004000 [12084.036554] Workqueue: btrfs-flush_delalloc btrfs_work_helper [btrfs] [12084.036599] Call Trace: [12084.036601] <TASK> [12084.036606] __schedule+0x3cb/0xed0 [12084.036616] schedule+0x4e/0xb0 [12084.036620] btrfs_start_ordered_extent+0x109/0x1c0 [btrfs] [12084.036651] ? prepare_to_wait_exclusive+0xc0/0xc0 [12084.036659] btrfs_run_ordered_extent_work+0x1a/0x30 [btrfs] [12084.036688] btrfs_work_helper+0xf8/0x400 [btrfs] [12084.0367 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: media: pvrusb2: fix memory leak in pvr_probe The error handling code in pvr2_hdw_create forgets to unregister the v4l2 device. When pvr2_hdw_create returns back to pvr2_context_create, it calls pvr2_context_destroy to destroy context, but mp->hdw is NULL, which leads to that pvr2_hdw_destroy directly returns. Fix this by adding v4l2_device_unregister to decrease the refcount of usb interface.

In the Linux kernel, the following vulnerability has been resolved: sfc: fix kernel panic when creating VF When creating VFs a kernel panic can happen when calling to efx_ef10_try_update_nic_stats_vf. When releasing a DMA coherent buffer, sometimes, I don't know in what specific circumstances, it has to unmap memory with vunmap. It is disallowed to do that in IRQ context or with BH disabled. Otherwise, we hit this line in vunmap, causing the crash: BUG_ON(in_interrupt()); This patch reenables BH to release the buffer. Log messages when the bug is hit: kernel BUG at mm/vmalloc.c:2727! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 6 PID: 1462 Comm: NetworkManager Kdump: loaded Tainted: G I --------- --- 5.14.0-119.el9.x86_64 #1 Hardware name: Dell Inc. PowerEdge R740/06WXJT, BIOS 2.8.2 08/27/2020 RIP: 0010:vunmap+0x2e/0x30 ...skip... Call Trace: __iommu_dma_free+0x96/0x100 efx_nic_free_buffer+0x2b/0x40 [sfc] efx_ef10_try_update_nic_stats_vf+0x14a/0x1c0 [sfc] efx_ef10_update_stats_vf+0x18/0x40 [sfc] efx_start_all+0x15e/0x1d0 [sfc] efx_net_open+0x5a/0xe0 [sfc] __dev_open+0xe7/0x1a0 __dev_change_flags+0x1d7/0x240 dev_change_flags+0x21/0x60 ...skip...

In the Linux kernel, the following vulnerability has been resolved: block: Fix possible memory leak for rq_wb on add_disk failure kmemleak reported memory leaks in device_add_disk(): kmemleak: 3 new suspected memory leaks unreferenced object 0xffff88800f420800 (size 512): comm "modprobe", pid 4275, jiffies 4295639067 (age 223.512s) hex dump (first 32 bytes): 04 00 00 00 08 00 00 00 01 00 00 00 00 00 00 00 ................ 00 e1 f5 05 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000d3662699>] kmalloc_trace+0x26/0x60 [<00000000edc7aadc>] wbt_init+0x50/0x6f0 [<0000000069601d16>] wbt_enable_default+0x157/0x1c0 [<0000000028fc393f>] blk_register_queue+0x2a4/0x420 [<000000007345a042>] device_add_disk+0x6fd/0xe40 [<0000000060e6aab0>] nbd_dev_add+0x828/0xbf0 [nbd] ... It is because the memory allocated in wbt_enable_default() is not released in device_add_disk() error path. Normally, these memory are freed in: del_gendisk() rq_qos_exit() rqos->ops->exit(rqos); wbt_exit() So rq_qos_exit() is called to free the rq_wb memory for wbt_init(). However in the error path of device_add_disk(), only blk_unregister_queue() is called and make rq_wb memory leaked. Add rq_qos_exit() to the error path to fix it.

In the Linux kernel, the following vulnerability has been resolved: bpf: Reject %p% format string in bprintf-like helpers static const char fmt[] = "%p%"; bpf_trace_printk(fmt, sizeof(fmt)); The above BPF program isn't rejected and causes a kernel warning at runtime: Please remove unsupported %\x00 in format string WARNING: CPU: 1 PID: 7244 at lib/vsprintf.c:2680 format_decode+0x49c/0x5d0 This happens because bpf_bprintf_prepare skips over the second %, detected as punctuation, while processing %p. This patch fixes it by not skipping over punctuation. %\x00 is then processed in the next iteration and rejected.

In the Linux kernel, the following vulnerability has been resolved: video: fbdev: s3fb: Check the size of screen before memset_io() In the function s3fb_set_par(), the value of 'screen_size' is calculated by the user input. If the user provides the improper value, the value of 'screen_size' may larger than 'info->screen_size', which may cause the following bug: [ 54.083733] BUG: unable to handle page fault for address: ffffc90003000000 [ 54.083742] #PF: supervisor write access in kernel mode [ 54.083744] #PF: error_code(0x0002) - not-present page [ 54.083760] RIP: 0010:memset_orig+0x33/0xb0 [ 54.083782] Call Trace: [ 54.083788] s3fb_set_par+0x1ec6/0x4040 [ 54.083806] fb_set_var+0x604/0xeb0 [ 54.083836] do_fb_ioctl+0x234/0x670 Fix the this by checking the value of 'screen_size' before memset_io().

In the Linux kernel, the following vulnerability has been resolved: lockd: set other missing fields when unlocking files vfs_lock_file() expects the struct file_lock to be fully initialised by the caller. Re-exported NFSv3 has been seen to Oops if the fl_file field is NULL.

In the Linux kernel, the following vulnerability has been resolved: mm/debug_vm_pgtable: clear page table entries at destroy_args() The mm/debug_vm_pagetable test allocates manually page table entries for the tests it runs, using also its manually allocated mm_struct. That in itself is ok, but when it exits, at destroy_args() it fails to clear those entries with the *_clear functions. The problem is that leaves stale entries. If another process allocates an mm_struct with a pgd at the same address, it may end up running into the stale entry. This is happening in practice on a debug kernel with CONFIG_DEBUG_VM_PGTABLE=y, for example this is the output with some extra debugging I added (it prints a warning trace if pgtables_bytes goes negative, in addition to the warning at check_mm() function): [ 2.539353] debug_vm_pgtable: [get_random_vaddr ]: random_vaddr is 0x7ea247140000 [ 2.539366] kmem_cache info [ 2.539374] kmem_cachep 0x000000002ce82385 - freelist 0x0000000000000000 - offset 0x508 [ 2.539447] debug_vm_pgtable: [init_args ]: args->mm is 0x000000002267cc9e (...) [ 2.552800] WARNING: CPU: 5 PID: 116 at include/linux/mm.h:2841 free_pud_range+0x8bc/0x8d0 [ 2.552816] Modules linked in: [ 2.552843] CPU: 5 UID: 0 PID: 116 Comm: modprobe Not tainted 6.12.0-105.debug_vm2.el10.ppc64le+debug #1 VOLUNTARY [ 2.552859] Hardware name: IBM,9009-41A POWER9 (architected) 0x4e0202 0xf000005 of:IBM,FW910.00 (VL910_062) hv:phyp pSeries [ 2.552872] NIP: c0000000007eef3c LR: c0000000007eef30 CTR: c0000000003d8c90 [ 2.552885] REGS: c0000000622e73b0 TRAP: 0700 Not tainted (6.12.0-105.debug_vm2.el10.ppc64le+debug) [ 2.552899] MSR: 800000000282b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 24002822 XER: 0000000a [ 2.552954] CFAR: c0000000008f03f0 IRQMASK: 0 [ 2.552954] GPR00: c0000000007eef30 c0000000622e7650 c000000002b1ac00 0000000000000001 [ 2.552954] GPR04: 0000000000000008 0000000000000000 c0000000007eef30 ffffffffffffffff [ 2.552954] GPR08: 00000000ffff00f5 0000000000000001 0000000000000048 0000000000004000 [ 2.552954] GPR12: 00000003fa440000 c000000017ffa300 c0000000051d9f80 ffffffffffffffdb [ 2.552954] GPR16: 0000000000000000 0000000000000008 000000000000000a 60000000000000e0 [ 2.552954] GPR20: 4080000000000000 c0000000113af038 00007fffcf130000 0000700000000000 [ 2.552954] GPR24: c000000062a6a000 0000000000000001 8000000062a68000 0000000000000001 [ 2.552954] GPR28: 000000000000000a c000000062ebc600 0000000000002000 c000000062ebc760 [ 2.553170] NIP [c0000000007eef3c] free_pud_range+0x8bc/0x8d0 [ 2.553185] LR [c0000000007eef30] free_pud_range+0x8b0/0x8d0 [ 2.553199] Call Trace: [ 2.553207] [c0000000622e7650] [c0000000007eef30] free_pud_range+0x8b0/0x8d0 (unreliable) [ 2.553229] [c0000000622e7750] [c0000000007f40b4] free_pgd_range+0x284/0x3b0 [ 2.553248] [c0000000622e7800] [c0000000007f4630] free_pgtables+0x450/0x570 [ 2.553274] [c0000000622e78e0] [c0000000008161c0] exit_mmap+0x250/0x650 [ 2.553292] [c0000000622e7a30] [c0000000001b95b8] __mmput+0x98/0x290 [ 2.558344] [c0000000622e7a80] [c0000000001d1018] exit_mm+0x118/0x1b0 [ 2.558361] [c0000000622e7ac0] [c0000000001d141c] do_exit+0x2ec/0x870 [ 2.558376] [c0000000622e7b60] [c0000000001d1ca8] do_group_exit+0x88/0x150 [ 2.558391] [c0000000622e7bb0] [c0000000001d1db8] sys_exit_group+0x48/0x50 [ 2.558407] [c0000000622e7be0] [c00000000003d810] system_call_exception+0x1e0/0x4c0 [ 2.558423] [c0000000622e7e50] [c00000000000d05c] system_call_vectored_common+0x15c/0x2ec (...) [ 2.558892] ---[ end trace 0000000000000000 ]--- [ 2.559022] BUG: Bad rss-counter state mm:000000002267cc9e type:MM_ANONPAGES val:1 [ 2.559037] BUG: non-zero pgtables_bytes on freeing mm: -6144 Here the modprobe process ended up with an allocated mm_struct from the mm_struct slab that was used before by the debug_vm_pgtable test. That is not a problem, since the mm_stru ---truncated---

In the Linux kernel, the following vulnerability has been resolved: Input: gpio-keys - fix a sleep while atomic with PREEMPT_RT When enabling PREEMPT_RT, the gpio_keys_irq_timer() callback runs in hard irq context, but the input_event() takes a spin_lock, which isn't allowed there as it is converted to a rt_spin_lock(). [ 4054.289999] BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48 [ 4054.290028] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/0 ... [ 4054.290195] __might_resched+0x13c/0x1f4 [ 4054.290209] rt_spin_lock+0x54/0x11c [ 4054.290219] input_event+0x48/0x80 [ 4054.290230] gpio_keys_irq_timer+0x4c/0x78 [ 4054.290243] __hrtimer_run_queues+0x1a4/0x438 [ 4054.290257] hrtimer_interrupt+0xe4/0x240 [ 4054.290269] arch_timer_handler_phys+0x2c/0x44 [ 4054.290283] handle_percpu_devid_irq+0x8c/0x14c [ 4054.290297] handle_irq_desc+0x40/0x58 [ 4054.290307] generic_handle_domain_irq+0x1c/0x28 [ 4054.290316] gic_handle_irq+0x44/0xcc Considering the gpio_keys_irq_isr() can run in any context, e.g. it can be threaded, it seems there's no point in requesting the timer isr to run in hard irq context. Relax the hrtimer not to use the hard context.

In the Linux kernel, the following vulnerability has been resolved: perf/core: Handle buffer mapping fail correctly in perf_mmap() After successful allocation of a buffer or a successful attachment to an existing buffer perf_mmap() tries to map the buffer read only into the page table. If that fails, the already set up page table entries are zapped, but the other perf specific side effects of that failure are not handled. The calling code just cleans up the VMA and does not invoke perf_mmap_close(). This leaks reference counts, corrupts user->vm accounting and also results in an unbalanced invocation of event::event_mapped(). Cure this by moving the event::event_mapped() invocation before the map_range() call so that on map_range() failure perf_mmap_close() can be invoked without causing an unbalanced event::event_unmapped() call. perf_mmap_close() undoes the reference counts and eventually frees buffers.

In the Linux kernel, the following vulnerability has been resolved: net: wwan: iosm: fix memory leak in ipc_pcie_read_bios_cfg ipc_pcie_read_bios_cfg() is using the acpi_evaluate_dsm() to obtain the wwan power state configuration from BIOS but is not freeing the acpi_object. The acpi_evaluate_dsm() returned acpi_object to be freed. Free the acpi_object after use.

In the Linux kernel, the following vulnerability has been resolved: landlock: Fix warning from KUnit tests get_id_range() expects a positive value as first argument but get_random_u8() can return 0. Fix this by clamping it. Validated by running the test in a for loop for 1000 times. Note that MAX() is wrong as it is only supposed to be used for constants, but max() is good here. [..] ok 9 test_range2_rand1 [..] ok 10 test_range2_rand2 [..] ok 11 test_range2_rand15 [..] ------------[ cut here ]------------ [..] WARNING: CPU: 6 PID: 104 at security/landlock/id.c:99 test_range2_rand16 (security/landlock/id.c:99 (discriminator 1) security/landlock/id.c:234 (discriminator 1)) [..] Modules linked in: [..] CPU: 6 UID: 0 PID: 104 Comm: kunit_try_catch Tainted: G N 6.16.0-rc1-dev-00001-g314a2f98b65f #1 PREEMPT(undef) [..] Tainted: [N]=TEST [..] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [..] RIP: 0010:test_range2_rand16 (security/landlock/id.c:99 (discriminator 1) security/landlock/id.c:234 (discriminator 1)) [..] Code: 49 c7 c0 10 70 30 82 4c 89 ff 48 c7 c6 a0 63 1e 83 49 c7 45 a0 e0 63 1e 83 e8 3f 95 17 00 e9 1f ff ff ff 0f 0b e9 df fd ff ff <0f> 0b ba 01 00 00 00 e9 68 fe ff ff 49 89 45 a8 49 8d 4d a0 45 31 [..] RSP: 0000:ffff888104eb7c78 EFLAGS: 00010246 [..] RAX: 0000000000000000 RBX: 000000000870822c RCX: 0000000000000000 ^^^^^^^^^^^^^^^^ [..] [..] Call Trace: [..] [..] ---[ end trace 0000000000000000 ]--- [..] ok 12 test_range2_rand16 [..] # landlock_id: pass:12 fail:0 skip:0 total:12 [..] # Totals: pass:12 fail:0 skip:0 total:12 [..] ok 1 landlock_id [mic: Minor cosmetic improvements]

IBM Spectrum Scale for IBM Elastic Storage Server 5.3.0 through 5.3.5 could allow an authenticated user to cause a denial of service during deployment or upgrade pertaining to xcat services. IBM X-Force ID: 179163.