In the Linux kernel, the following vulnerability has been resolved: ice: fix Rx page leak on multi-buffer frames The ice_put_rx_mbuf() function handles calling ice_put_rx_buf() for each buffer in the current frame. This function was introduced as part of handling multi-buffer XDP support in the ice driver. It works by iterating over the buffers from first_desc up to 1 plus the total number of fragments in the frame, cached from before the XDP program was executed. If the hardware posts a descriptor with a size of 0, the logic used in ice_put_rx_mbuf() breaks. Such descriptors get skipped and don't get added as fragments in ice_add_xdp_frag. Since the buffer isn't counted as a fragment, we do not iterate over it in ice_put_rx_mbuf(), and thus we don't call ice_put_rx_buf(). Because we don't call ice_put_rx_buf(), we don't attempt to re-use the page or free it. This leaves a stale page in the ring, as we don't increment next_to_alloc. The ice_reuse_rx_page() assumes that the next_to_alloc has been incremented properly, and that it always points to a buffer with a NULL page. Since this function doesn't check, it will happily recycle a page over the top of the next_to_alloc buffer, losing track of the old page. Note that this leak only occurs for multi-buffer frames. The ice_put_rx_mbuf() function always handles at least one buffer, so a single-buffer frame will always get handled correctly. It is not clear precisely why the hardware hands us descriptors with a size of 0 sometimes, but it happens somewhat regularly with "jumbo frames" used by 9K MTU. To fix ice_put_rx_mbuf(), we need to make sure to call ice_put_rx_buf() on all buffers between first_desc and next_to_clean. Borrow the logic of a similar function in i40e used for this same purpose. Use the same logic also in ice_get_pgcnts(). Instead of iterating over just the number of fragments, use a loop which iterates until the current index reaches to the next_to_clean element just past the current frame. Unlike i40e, the ice_put_rx_mbuf() function does call ice_put_rx_buf() on the last buffer of the frame indicating the end of packet. For non-linear (multi-buffer) frames, we need to take care when adjusting the pagecnt_bias. An XDP program might release fragments from the tail of the frame, in which case that fragment page is already released. Only update the pagecnt_bias for the first descriptor and fragments still remaining post-XDP program. Take care to only access the shared info for fragmented buffers, as this avoids a significant cache miss. The xdp_xmit value only needs to be updated if an XDP program is run, and only once per packet. Drop the xdp_xmit pointer argument from ice_put_rx_mbuf(). Instead, set xdp_xmit in the ice_clean_rx_irq() function directly. This avoids needing to pass the argument and avoids an extra bit-wise OR for each buffer in the frame. Move the increment of the ntc local variable to ensure its updated *before* all calls to ice_get_pgcnts() or ice_put_rx_mbuf(), as the loop logic requires the index of the element just after the current frame. Now that we use an index pointer in the ring to identify the packet, we no longer need to track or cache the number of fragments in the rx_ring.

In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Fix memory leak in tb_handle_dp_bandwidth_request() The memory allocated in tb_queue_dp_bandwidth_request() needs to be released once the request is handled to avoid leaking it.

go7007_snd_init in drivers/media/usb/go7007/snd-go7007.c in the Linux kernel before 5.6 does not call snd_card_free for a failure path, which causes a memory leak, aka CID-9453264ef586.

In the Linux kernel, the following vulnerability has been resolved: mm/kmemleak: avoid soft lockup in __kmemleak_do_cleanup() A soft lockup warning was observed on a relative small system x86-64 system with 16 GB of memory when running a debug kernel with kmemleak enabled. watchdog: BUG: soft lockup - CPU#8 stuck for 33s! [kworker/8:1:134] The test system was running a workload with hot unplug happening in parallel. Then kemleak decided to disable itself due to its inability to allocate more kmemleak objects. The debug kernel has its CONFIG_DEBUG_KMEMLEAK_MEM_POOL_SIZE set to 40,000. The soft lockup happened in kmemleak_do_cleanup() when the existing kmemleak objects were being removed and deleted one-by-one in a loop via a workqueue. In this particular case, there are at least 40,000 objects that need to be processed and given the slowness of a debug kernel and the fact that a raw_spinlock has to be acquired and released in __delete_object(), it could take a while to properly handle all these objects. As kmemleak has been disabled in this case, the object removal and deletion process can be further optimized as locking isn't really needed. However, it is probably not worth the effort to optimize for such an edge case that should rarely happen. So the simple solution is to call cond_resched() at periodic interval in the iteration loop to avoid soft lockup.

In the Linux kernel, the following vulnerability has been resolved: scsi: core: Remove the /proc/scsi/${proc_name} directory earlier Remove the /proc/scsi/${proc_name} directory earlier to fix a race condition between unloading and reloading kernel modules. This fixes a bug introduced in 2009 by commit 77c019768f06 ("[SCSI] fix /proc memory leak in the SCSI core"). Fix the following kernel warning: proc_dir_entry 'scsi/scsi_debug' already registered WARNING: CPU: 19 PID: 27986 at fs/proc/generic.c:376 proc_register+0x27d/0x2e0 Call Trace: proc_mkdir+0xb5/0xe0 scsi_proc_hostdir_add+0xb5/0x170 scsi_host_alloc+0x683/0x6c0 sdebug_driver_probe+0x6b/0x2d0 [scsi_debug] really_probe+0x159/0x540 __driver_probe_device+0xdc/0x230 driver_probe_device+0x4f/0x120 __device_attach_driver+0xef/0x180 bus_for_each_drv+0xe5/0x130 __device_attach+0x127/0x290 device_initial_probe+0x17/0x20 bus_probe_device+0x110/0x130 device_add+0x673/0xc80 device_register+0x1e/0x30 sdebug_add_host_helper+0x1a7/0x3b0 [scsi_debug] scsi_debug_init+0x64f/0x1000 [scsi_debug] do_one_initcall+0xd7/0x470 do_init_module+0xe7/0x330 load_module+0x122a/0x12c0 __do_sys_finit_module+0x124/0x1a0 __x64_sys_finit_module+0x46/0x50 do_syscall_64+0x38/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0

In the Linux kernel, the following vulnerability has been resolved: clk: Fix memory leak in devm_clk_notifier_register() devm_clk_notifier_register() allocates a devres resource for clk notifier but didn't register that to the device, so the notifier didn't get unregistered on device detach and the allocated resource was leaked. Fix the issue by registering the resource through devres_add(). This issue was found with kmemleak on a Chromebook.

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7915: fix memory leak in mt7915_mcu_exit Always purge mcu skb queues in mt7915_mcu_exit routine even if mt7915_firmware_state fails.

In the Linux kernel, the following vulnerability has been resolved: video: screen_info: Relocate framebuffers behind PCI bridges Apply PCI host-bridge window offsets to screen_info framebuffers. Fixes invalid access to I/O memory. Resources behind a PCI host bridge can be relocated by a certain offset in the kernel's CPU address range used for I/O. The framebuffer memory range stored in screen_info refers to the CPU addresses as seen during boot (where the offset is 0). During boot up, firmware may assign a different memory offset to the PCI host bridge and thereby relocating the framebuffer address of the PCI graphics device as seen by the kernel. The information in screen_info must be updated as well. The helper pcibios_bus_to_resource() performs the relocation of the screen_info's framebuffer resource (given in PCI bus addresses). The result matches the I/O-memory resource of the PCI graphics device (given in CPU addresses). As before, we store away the information necessary to later update the information in screen_info itself. Commit 78aa89d1dfba ("firmware/sysfb: Update screen_info for relocated EFI framebuffers") added the code for updating screen_info. It is based on similar functionality that pre-existed in efifb. Efifb uses a pointer to the PCI resource, while the newer code does a memcpy of the region. Hence efifb sees any updates to the PCI resource and avoids the issue. v3: - Only use struct pci_bus_region for PCI bus addresses (Bjorn) - Clarify address semantics in commit messages and comments (Bjorn) v2: - Fixed tags (Takashi, Ivan) - Updated information on efifb

In the Linux kernel, the following vulnerability has been resolved: USB: gadget: pxa27x_udc: fix memory leak with using debugfs_lookup() When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: DR, fix memory leak in mlx5dr_cmd_create_reformat_ctx when mlx5_cmd_exec failed in mlx5dr_cmd_create_reformat_ctx, the memory pointed by 'in' is not released, which will cause memory leak. Move memory release after mlx5_cmd_exec.

In the Linux kernel, the following vulnerability has been resolved: media: mdp3: Fix resource leaks in of_find_device_by_node Use put_device to release the object get through of_find_device_by_node, avoiding resource leaks.

In the Linux kernel, the following vulnerability has been resolved: s390/dasd: Fix potential memleak in dasd_eckd_init() `dasd_reserve_req` is allocated before `dasd_vol_info_req`, and it also needs to be freed before the error returns, just like the other cases in this function.

In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: don't leak memory if dev_set_name() fails When dev_set_name() fails, zcdn_create() doesn't free the newly allocated resources. Do it.

In the Linux kernel, the following vulnerability has been resolved: ACPICA: fix acpi parse and parseext cache leaks ACPICA commit 8829e70e1360c81e7a5a901b5d4f48330e021ea5 I'm Seunghun Han, and I work for National Security Research Institute of South Korea. I have been doing a research on ACPI and found an ACPI cache leak in ACPI early abort cases. Boot log of ACPI cache leak is as follows: [ 0.352414] ACPI: Added _OSI(Module Device) [ 0.353182] ACPI: Added _OSI(Processor Device) [ 0.353182] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.353182] ACPI: Added _OSI(Processor Aggregator Device) [ 0.356028] ACPI: Unable to start the ACPI Interpreter [ 0.356799] ACPI Error: Could not remove SCI handler (20170303/evmisc-281) [ 0.360215] kmem_cache_destroy Acpi-State: Slab cache still has objects [ 0.360648] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 4.12.0-rc4-next-20170608+ #10 [ 0.361273] Hardware name: innotek gmb_h virtual_box/virtual_box, BIOS virtual_box 12/01/2006 [ 0.361873] Call Trace: [ 0.362243] ? dump_stack+0x5c/0x81 [ 0.362591] ? kmem_cache_destroy+0x1aa/0x1c0 [ 0.362944] ? acpi_sleep_proc_init+0x27/0x27 [ 0.363296] ? acpi_os_delete_cache+0xa/0x10 [ 0.363646] ? acpi_ut_delete_caches+0x6d/0x7b [ 0.364000] ? acpi_terminate+0xa/0x14 [ 0.364000] ? acpi_init+0x2af/0x34f [ 0.364000] ? __class_create+0x4c/0x80 [ 0.364000] ? video_setup+0x7f/0x7f [ 0.364000] ? acpi_sleep_proc_init+0x27/0x27 [ 0.364000] ? do_one_initcall+0x4e/0x1a0 [ 0.364000] ? kernel_init_freeable+0x189/0x20a [ 0.364000] ? rest_init+0xc0/0xc0 [ 0.364000] ? kernel_init+0xa/0x100 [ 0.364000] ? ret_from_fork+0x25/0x30 I analyzed this memory leak in detail. I found that “Acpi-State” cache and “Acpi-Parse” cache were merged because the size of cache objects was same slab cache size. I finally found “Acpi-Parse” cache and “Acpi-parse_ext” cache were leaked using SLAB_NEVER_MERGE flag in kmem_cache_create() function. Real ACPI cache leak point is as follows: [ 0.360101] ACPI: Added _OSI(Module Device) [ 0.360101] ACPI: Added _OSI(Processor Device) [ 0.360101] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.361043] ACPI: Added _OSI(Processor Aggregator Device) [ 0.364016] ACPI: Unable to start the ACPI Interpreter [ 0.365061] ACPI Error: Could not remove SCI handler (20170303/evmisc-281) [ 0.368174] kmem_cache_destroy Acpi-Parse: Slab cache still has objects [ 0.369332] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 4.12.0-rc4-next-20170608+ #8 [ 0.371256] Hardware name: innotek gmb_h virtual_box/virtual_box, BIOS virtual_box 12/01/2006 [ 0.372000] Call Trace: [ 0.372000] ? dump_stack+0x5c/0x81 [ 0.372000] ? kmem_cache_destroy+0x1aa/0x1c0 [ 0.372000] ? acpi_sleep_proc_init+0x27/0x27 [ 0.372000] ? acpi_os_delete_cache+0xa/0x10 [ 0.372000] ? acpi_ut_delete_caches+0x56/0x7b [ 0.372000] ? acpi_terminate+0xa/0x14 [ 0.372000] ? acpi_init+0x2af/0x34f [ 0.372000] ? __class_create+0x4c/0x80 [ 0.372000] ? video_setup+0x7f/0x7f [ 0.372000] ? acpi_sleep_proc_init+0x27/0x27 [ 0.372000] ? do_one_initcall+0x4e/0x1a0 [ 0.372000] ? kernel_init_freeable+0x189/0x20a [ 0.372000] ? rest_init+0xc0/0xc0 [ 0.372000] ? kernel_init+0xa/0x100 [ 0.372000] ? ret_from_fork+0x25/0x30 [ 0.388039] kmem_cache_destroy Acpi-parse_ext: Slab cache still has objects [ 0.389063] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 4.12.0-rc4-next-20170608+ #8 [ 0.390557] Hardware name: innotek gmb_h virtual_box/virtual_box, BIOS virtual_box 12/01/2006 [ 0.392000] Call Trace: [ 0.392000] ? dump_stack+0x5c/0x81 [ 0.392000] ? kmem_cache_destroy+0x1aa/0x1c0 [ 0.392000] ? acpi_sleep_proc_init+0x27/0x27 [ 0.392000] ? acpi_os_delete_cache+0xa/0x10 [ 0.392000] ? acpi_ut_delete_caches+0x6d/0x7b [ 0.392000] ? acpi_terminate+0xa/0x14 [ 0.392000] ? acpi_init+0x2af/0x3 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: io_uring/poll: don't reissue in case of poll race on multishot request A previous commit fixed a poll race that can occur, but it's only applicable for multishot requests. For a multishot request, we can safely ignore a spurious wakeup, as we never leave the waitqueue to begin with. A blunt reissue of a multishot armed request can cause us to leak a buffer, if they are ring provided. While this seems like a bug in itself, it's not really defined behavior to reissue a multishot request directly. It's less efficient to do so as well, and not required to rearm anything like it is for singleshot poll requests.

In the Linux kernel, the following vulnerability has been resolved: drm/i915: Fix memory leaks in i915 selftests This patch fixes memory leaks on error escapes in function fake_get_pages (cherry picked from commit 8bfbdadce85c4c51689da10f39c805a7106d4567)

In the Linux kernel, the following vulnerability has been resolved: USB: dwc3: fix memory leak with using debugfs_lookup() When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once. Note, the root dentry for the debugfs directory for the device needs to be saved so we don't have to keep looking it up, which required a bit more refactoring to properly create and remove it when needed.

In the Linux kernel, the following vulnerability has been resolved: cassini: Fix a memory leak in the error handling path of cas_init_one() cas_saturn_firmware_init() allocates some memory using vmalloc(). This memory is freed in the .remove() function but not it the error handling path of the probe. Add the missing vfree() to avoid a memory leak, should an error occur.

In the Linux kernel, the following vulnerability has been resolved: USB: ULPI: fix memory leak with using debugfs_lookup() When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: fix memory leak in mlx5e_fs_tt_redirect_any_create The memory pointed to by the fs->any pointer is not freed in the error path of mlx5e_fs_tt_redirect_any_create, which can lead to a memory leak. Fix by freeing the memory in the error path, thereby making the error path identical to mlx5e_fs_tt_redirect_any_destroy().

In the Linux kernel, the following vulnerability has been resolved: driver core: fix resource leak in device_add() When calling kobject_add() failed in device_add(), it will call cleanup_glue_dir() to free resource. But in kobject_add(), dev->kobj.parent has been set to NULL. This will cause resource leak. The process is as follows: device_add() get_device_parent() class_dir_create_and_add() kobject_add() //kobject_get() ... dev->kobj.parent = kobj; ... kobject_add() //failed, but set dev->kobj.parent = NULL ... glue_dir = get_glue_dir(dev) //glue_dir = NULL, and goto //"Error" label ... cleanup_glue_dir() //becaues glue_dir is NULL, not call //kobject_put() The preceding problem may cause insmod mac80211_hwsim.ko to failed. sysfs: cannot create duplicate filename '/devices/virtual/mac80211_hwsim' Call Trace: <TASK> dump_stack_lvl+0x8e/0xd1 sysfs_warn_dup.cold+0x1c/0x29 sysfs_create_dir_ns+0x224/0x280 kobject_add_internal+0x2aa/0x880 kobject_add+0x135/0x1a0 get_device_parent+0x3d7/0x590 device_add+0x2aa/0x1cb0 device_create_groups_vargs+0x1eb/0x260 device_create+0xdc/0x110 mac80211_hwsim_new_radio+0x31e/0x4790 [mac80211_hwsim] init_mac80211_hwsim+0x48d/0x1000 [mac80211_hwsim] do_one_initcall+0x10f/0x630 do_init_module+0x19f/0x5e0 load_module+0x64b7/0x6eb0 __do_sys_finit_module+0x140/0x200 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 </TASK> kobject_add_internal failed for mac80211_hwsim with -EEXIST, don't try to register things with the same name in the same directory.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_conn: Fix memory leaks When hci_cmd_sync_queue() failed in hci_le_terminate_big() or hci_le_big_terminate(), the memory pointed by variable d is not freed, which will cause memory leak. Add release process to error path.

In the Linux kernel, the following vulnerability has been resolved: samples/bpf: Fix fout leak in hbm's run_bpf_prog Fix fout being fopen'ed but then not subsequently fclose'd. In the affected branch, fout is otherwise going out of scope.

In the Linux kernel, the following vulnerability has been resolved: USB: sl811: fix memory leak with using debugfs_lookup() When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.

In the Linux kernel, the following vulnerability has been resolved: gpu: host1x: Fix memory leak of device names The device names allocated by dev_set_name() need be freed before module unloading, but they can not be freed because the kobject's refcount which was set in device_initialize() has not be decreased to 0. As comment of device_add() says, if it fails, use only put_device() drop the refcount, then the name will be freed in kobejct_cleanup(). device_del() and put_device() can be replaced with device_unregister(), so call it to unregister the added successfully devices, and just call put_device() to the not added device. Add a release() function to device to avoid null release() function WARNING in device_release(), it's empty, because the context devices are freed together in host1x_memory_context_list_free().

mwifiex_tm_cmd in drivers/net/wireless/marvell/mwifiex/cfg80211.c in the Linux kernel before 5.1.6 has some error-handling cases that did not free allocated hostcmd memory, aka CID-003b686ace82. This will cause a memory leak and denial of service.

In the Linux kernel, the following vulnerability has been resolved: drivers: base: component: fix memory leak with using debugfs_lookup() When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.

In the Linux kernel, the following vulnerability has been resolved: recordmcount: Fix memory leaks in the uwrite function Common realloc mistake: 'file_append' nulled but not freed upon failure

In the Linux kernel, the following vulnerability has been resolved: objtool: Fix memory leak in create_static_call_sections() strdup() allocates memory for key_name. We need to release the memory in the following error paths. Add free() to avoid memory leak.

In the Linux kernel, the following vulnerability has been resolved: nvme-core: fix dev_pm_qos memleak Call dev_pm_qos_hide_latency_tolerance() in the error unwind patch to avoid following kmemleak:- blktests (master) # kmemleak-clear; ./check nvme/044; blktests (master) # kmemleak-scan ; kmemleak-show nvme/044 (Test bi-directional authentication) [passed] runtime 2.111s ... 2.124s unreferenced object 0xffff888110c46240 (size 96): comm "nvme", pid 33461, jiffies 4345365353 (age 75.586s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<0000000069ac2cec>] kmalloc_trace+0x25/0x90 [<000000006acc66d5>] dev_pm_qos_update_user_latency_tolerance+0x6f/0x100 [<00000000cc376ea7>] nvme_init_ctrl+0x38e/0x410 [nvme_core] [<000000007df61b4b>] 0xffffffffc05e88b3 [<00000000d152b985>] 0xffffffffc05744cb [<00000000f04a4041>] vfs_write+0xc5/0x3c0 [<00000000f9491baf>] ksys_write+0x5f/0xe0 [<000000001c46513d>] do_syscall_64+0x3b/0x90 [<00000000ecf348fe>] entry_SYSCALL_64_after_hwframe+0x72/0xdc

In the Linux kernel, the following vulnerability has been resolved: scsi: scsi_dh_alua: Fix memleak for 'qdata' in alua_activate() If alua_rtpg_queue() failed from alua_activate(), then 'qdata' is not freed, which will cause following memleak: unreferenced object 0xffff88810b2c6980 (size 32): comm "kworker/u16:2", pid 635322, jiffies 4355801099 (age 1216426.076s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 40 39 24 c1 ff ff ff ff 00 f8 ea 0a 81 88 ff ff @9$............. backtrace: [<0000000098f3a26d>] alua_activate+0xb0/0x320 [<000000003b529641>] scsi_dh_activate+0xb2/0x140 [<000000007b296db3>] activate_path_work+0xc6/0xe0 [dm_multipath] [<000000007adc9ace>] process_one_work+0x3c5/0x730 [<00000000c457a985>] worker_thread+0x93/0x650 [<00000000cb80e628>] kthread+0x1ba/0x210 [<00000000a1e61077>] ret_from_fork+0x22/0x30 Fix the problem by freeing 'qdata' in error path.

In the Linux kernel, the following vulnerability has been resolved: Revert "wifi: mac80211: fix memory leak in ieee80211_if_add()" This reverts commit 13e5afd3d773c6fc6ca2b89027befaaaa1ea7293. ieee80211_if_free() is already called from free_netdev(ndev) because ndev->priv_destructor == ieee80211_if_free syzbot reported: general protection fault, probably for non-canonical address 0xdffffc0000000004: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000020-0x0000000000000027] CPU: 0 PID: 10041 Comm: syz-executor.0 Not tainted 6.2.0-rc2-syzkaller-00388-g55b98837e37d #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 RIP: 0010:pcpu_get_page_chunk mm/percpu.c:262 [inline] RIP: 0010:pcpu_chunk_addr_search mm/percpu.c:1619 [inline] RIP: 0010:free_percpu mm/percpu.c:2271 [inline] RIP: 0010:free_percpu+0x186/0x10f0 mm/percpu.c:2254 Code: 80 3c 02 00 0f 85 f5 0e 00 00 48 8b 3b 48 01 ef e8 cf b3 0b 00 48 ba 00 00 00 00 00 fc ff df 48 8d 78 20 48 89 f9 48 c1 e9 03 <80> 3c 11 00 0f 85 3b 0e 00 00 48 8b 58 20 48 b8 00 00 00 00 00 fc RSP: 0018:ffffc90004ba7068 EFLAGS: 00010002 RAX: 0000000000000000 RBX: ffff88823ffe2b80 RCX: 0000000000000004 RDX: dffffc0000000000 RSI: ffffffff81c1f4e7 RDI: 0000000000000020 RBP: ffffe8fffe8fc220 R08: 0000000000000005 R09: 0000000000000000 R10: 0000000000000000 R11: 1ffffffff2179ab2 R12: ffff8880b983d000 R13: 0000000000000003 R14: 0000607f450fc220 R15: ffff88823ffe2988 FS: 00007fcb349de700(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b32220000 CR3: 000000004914f000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> netdev_run_todo+0x6bf/0x1100 net/core/dev.c:10352 ieee80211_register_hw+0x2663/0x4040 net/mac80211/main.c:1411 mac80211_hwsim_new_radio+0x2537/0x4d80 drivers/net/wireless/mac80211_hwsim.c:4583 hwsim_new_radio_nl+0xa09/0x10f0 drivers/net/wireless/mac80211_hwsim.c:5176 genl_family_rcv_msg_doit.isra.0+0x1e6/0x2d0 net/netlink/genetlink.c:968 genl_family_rcv_msg net/netlink/genetlink.c:1048 [inline] genl_rcv_msg+0x4ff/0x7e0 net/netlink/genetlink.c:1065 netlink_rcv_skb+0x165/0x440 net/netlink/af_netlink.c:2564 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1076 netlink_unicast_kernel net/netlink/af_netlink.c:1330 [inline] netlink_unicast+0x547/0x7f0 net/netlink/af_netlink.c:1356 netlink_sendmsg+0x91b/0xe10 net/netlink/af_netlink.c:1932 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0xd3/0x120 net/socket.c:734 ____sys_sendmsg+0x712/0x8c0 net/socket.c:2476 ___sys_sendmsg+0x110/0x1b0 net/socket.c:2530 __sys_sendmsg+0xf7/0x1c0 net/socket.c:2559 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd

In the Linux kernel, the following vulnerability has been resolved: kernel/irq/irqdomain.c: fix memory leak with using debugfs_lookup() When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.

In the Linux kernel, the following vulnerability has been resolved: netfilter: x_tables: fix percpu counter block leak on error path when creating new netns Here is the stack where we allocate percpu counter block: +-< __alloc_percpu +-< xt_percpu_counter_alloc +-< find_check_entry # {arp,ip,ip6}_tables.c +-< translate_table And it can be leaked on this code path: +-> ip6t_register_table +-> translate_table # allocates percpu counter block +-> xt_register_table # fails there is no freeing of the counter block on xt_register_table fail. Note: xt_percpu_counter_free should be called to free it like we do in do_replace through cleanup_entry helper (or in __ip6t_unregister_table). Probability of hitting this error path is low AFAICS (xt_register_table can only return ENOMEM here, as it is not replacing anything, as we are creating new netns, and it is hard to imagine that all previous allocations succeeded and after that one in xt_register_table failed). But it's worth fixing even the rare leak.

In the Linux kernel, the following vulnerability has been resolved: driver core: location: Free struct acpi_pld_info *pld before return false struct acpi_pld_info *pld should be freed before the return of allocation failure, to prevent memory leak, add the ACPI_FREE() to fix it.

In the Linux kernel before 5.1, there is a memory leak in __feat_register_sp() in net/dccp/feat.c, which may cause denial of service, aka CID-1d3ff0950e2b.

A memory leak in the nl80211_get_ftm_responder_stats() function in net/wireless/nl80211.c in the Linux kernel through 5.3.11 allows attackers to cause a denial of service (memory consumption) by triggering nl80211hdr_put() failures, aka CID-1399c59fa929. NOTE: third parties dispute the relevance of this because it occurs on a code path where a successful allocation has already occurred

In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Fix memory leak in margining Memory for the usb4->margining needs to be relased for the upstream port of the router as well, even though the debugfs directory gets released with the router device removal. Fix this.

A memory leak in the sof_set_get_large_ctrl_data() function in sound/soc/sof/ipc.c in the Linux kernel through 5.3.9 allows attackers to cause a denial of service (memory consumption) by triggering sof_get_ctrl_copy_params() failures, aka CID-45c1380358b1.

In the Linux kernel, the following vulnerability has been resolved: cifs: fix mid leak during reconnection after timeout threshold When the number of responses with status of STATUS_IO_TIMEOUT exceeds a specified threshold (NUM_STATUS_IO_TIMEOUT), we reconnect the connection. But we do not return the mid, or the credits returned for the mid, or reduce the number of in-flight requests. This bug could result in the server->in_flight count to go bad, and also cause a leak in the mids. This change moves the check to a few lines below where the response is decrypted, even of the response is read from the transform header. This way, the code for returning the mids can be reused. Also, the cifs_reconnect was reconnecting just the transport connection before. In case of multi-channel, this may not be what we want to do after several timeouts. Changed that to reconnect the session and the tree too. Also renamed NUM_STATUS_IO_TIMEOUT to a more appropriate name MAX_STATUS_IO_TIMEOUT.

In the Linux kernel, the following vulnerability has been resolved: USB: fotg210: fix memory leak with using debugfs_lookup() When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.

In the Linux kernel, the following vulnerability has been resolved: trace/blktrace: fix memory leak with using debugfs_lookup() When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.

In the Linux kernel, the following vulnerability has been resolved: accel/qaic: Fix slicing memory leak The temporary buffer storing slicing configuration data from user is only freed on error. This is a memory leak. Free the buffer unconditionally.

In the Linux kernel, the following vulnerability has been resolved: USB: gadget: lpc32xx_udc: fix memory leak with using debugfs_lookup() When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.

In the Linux kernel, the following vulnerability has been resolved: USB: gadget: bcm63xx_udc: fix memory leak with using debugfs_lookup() When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.

In the Linux kernel, the following vulnerability has been resolved: caif: fix memory leak in cfctrl_linkup_request() When linktype is unknown or kzalloc failed in cfctrl_linkup_request(), pkt is not released. Add release process to error path.

In the Linux kernel, the following vulnerability has been resolved: tty: pcn_uart: fix memory leak with using debugfs_lookup() When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.

In the Linux kernel, the following vulnerability has been resolved: media: hi846: Fix memleak in hi846_init_controls() hi846_init_controls doesn't clean the allocated ctrl_hdlr in case there is a failure, which causes memleak. Add v4l2_ctrl_handler_free to free the resource properly.

In the Linux kernel, the following vulnerability has been resolved: SUNRPC: Fix a server shutdown leak Fix a race where kthread_stop() may prevent the threadfn from ever getting called. If that happens the svc_rqst will not be cleaned up.

In the Linux kernel, the following vulnerability has been resolved: net: usb: smsc75xx: Limit packet length to skb->len Packet length retrieved from skb data may be larger than the actual socket buffer length (up to 9026 bytes). In such case the cloned skb passed up the network stack will leak kernel memory contents.