In the Linux kernel, the following vulnerability has been resolved: genirq/ipi: Fix NULL pointer deref in irq_data_get_affinity_mask() If ipi_send_{mask|single}() is called with an invalid interrupt number, all the local variables there will be NULL. ipi_send_verify() which is invoked from these functions does verify its 'data' parameter, resulting in a kernel oops in irq_data_get_affinity_mask() as the passed NULL pointer gets dereferenced. Add a missing NULL pointer check in ipi_send_verify()... Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool.

In the Linux kernel, the following vulnerability has been resolved: RDMA/cma: Allow UD qp_type to join multicast only As for multicast: - The SIDR is the only mode that makes sense; - Besides PS_UDP, other port spaces like PS_IB is also allowed, as it is UD compatible. In this case qkey also needs to be set [1]. This patch allows only UD qp_type to join multicast, and set qkey to default if it's not set, to fix an uninit-value error: the ib->rec.qkey field is accessed without being initialized. ===================================================== BUG: KMSAN: uninit-value in cma_set_qkey drivers/infiniband/core/cma.c:510 [inline] BUG: KMSAN: uninit-value in cma_make_mc_event+0xb73/0xe00 drivers/infiniband/core/cma.c:4570 cma_set_qkey drivers/infiniband/core/cma.c:510 [inline] cma_make_mc_event+0xb73/0xe00 drivers/infiniband/core/cma.c:4570 cma_iboe_join_multicast drivers/infiniband/core/cma.c:4782 [inline] rdma_join_multicast+0x2b83/0x30a0 drivers/infiniband/core/cma.c:4814 ucma_process_join+0xa76/0xf60 drivers/infiniband/core/ucma.c:1479 ucma_join_multicast+0x1e3/0x250 drivers/infiniband/core/ucma.c:1546 ucma_write+0x639/0x6d0 drivers/infiniband/core/ucma.c:1732 vfs_write+0x8ce/0x2030 fs/read_write.c:588 ksys_write+0x28c/0x520 fs/read_write.c:643 __do_sys_write fs/read_write.c:655 [inline] __se_sys_write fs/read_write.c:652 [inline] __ia32_sys_write+0xdb/0x120 fs/read_write.c:652 do_syscall_32_irqs_on arch/x86/entry/common.c:114 [inline] __do_fast_syscall_32+0x96/0xf0 arch/x86/entry/common.c:180 do_fast_syscall_32+0x34/0x70 arch/x86/entry/common.c:205 do_SYSENTER_32+0x1b/0x20 arch/x86/entry/common.c:248 entry_SYSENTER_compat_after_hwframe+0x4d/0x5c Local variable ib.i created at: cma_iboe_join_multicast drivers/infiniband/core/cma.c:4737 [inline] rdma_join_multicast+0x586/0x30a0 drivers/infiniband/core/cma.c:4814 ucma_process_join+0xa76/0xf60 drivers/infiniband/core/ucma.c:1479 CPU: 0 PID: 29874 Comm: syz-executor.3 Not tainted 5.16.0-rc3-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 ===================================================== [1] https://lore.kernel.org/linux-rdma/20220117183832.GD84788@nvidia.com/

In the Linux kernel, the following vulnerability has been resolved: erofs: Fix detection of atomic context Current check for atomic context is not sufficient as z_erofs_decompressqueue_endio can be called under rcu lock from blk_mq_flush_plug_list(). See the stacktrace [1] In such case we should hand off the decompression work for async processing rather than trying to do sync decompression in current context. Patch fixes the detection by checking for rcu_read_lock_any_held() and while at it use more appropriate !in_task() check than in_atomic(). Background: Historically erofs would always schedule a kworker for decompression which would incur the scheduling cost regardless of the context. But z_erofs_decompressqueue_endio() may not always be in atomic context and we could actually benefit from doing the decompression in z_erofs_decompressqueue_endio() if we are in thread context, for example when running with dm-verity. This optimization was later added in patch [2] which has shown improvement in performance benchmarks. ============================================== [1] Problem stacktrace [name:core&]BUG: sleeping function called from invalid context at kernel/locking/mutex.c:291 [name:core&]in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 1615, name: CpuMonitorServi [name:core&]preempt_count: 0, expected: 0 [name:core&]RCU nest depth: 1, expected: 0 CPU: 7 PID: 1615 Comm: CpuMonitorServi Tainted: G S W OE 6.1.25-android14-5-maybe-dirty-mainline #1 Hardware name: MT6897 (DT) Call trace: dump_backtrace+0x108/0x15c show_stack+0x20/0x30 dump_stack_lvl+0x6c/0x8c dump_stack+0x20/0x48 __might_resched+0x1fc/0x308 __might_sleep+0x50/0x88 mutex_lock+0x2c/0x110 z_erofs_decompress_queue+0x11c/0xc10 z_erofs_decompress_kickoff+0x110/0x1a4 z_erofs_decompressqueue_endio+0x154/0x180 bio_endio+0x1b0/0x1d8 __dm_io_complete+0x22c/0x280 clone_endio+0xe4/0x280 bio_endio+0x1b0/0x1d8 blk_update_request+0x138/0x3a4 blk_mq_plug_issue_direct+0xd4/0x19c blk_mq_flush_plug_list+0x2b0/0x354 __blk_flush_plug+0x110/0x160 blk_finish_plug+0x30/0x4c read_pages+0x2fc/0x370 page_cache_ra_unbounded+0xa4/0x23c page_cache_ra_order+0x290/0x320 do_sync_mmap_readahead+0x108/0x2c0 filemap_fault+0x19c/0x52c __do_fault+0xc4/0x114 handle_mm_fault+0x5b4/0x1168 do_page_fault+0x338/0x4b4 do_translation_fault+0x40/0x60 do_mem_abort+0x60/0xc8 el0_da+0x4c/0xe0 el0t_64_sync_handler+0xd4/0xfc el0t_64_sync+0x1a0/0x1a4 [2] Link: https://lore.kernel.org/all/20210317035448.13921-1-huangjianan@oppo.com/

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: xsk: Fix crash on regular rq reactivation When the regular rq is reactivated after the XSK socket is closed it could be reading stale cqes which eventually corrupts the rq. This leads to no more traffic being received on the regular rq and a crash on the next close or deactivation of the rq. Kal Cuttler Conely reported this issue as a crash on the release path when the xdpsock sample program is stopped (killed) and restarted in sequence while traffic is running. This patch flushes all cqes when during the rq flush. The cqe flushing is done in the reset state of the rq. mlx5e_rq_to_ready code is moved into the flush function to allow for this.

In the Linux kernel, the following vulnerability has been resolved: drm/xe: Fix missing runtime PM reference in ccs_mode_store ccs_mode_store() calls xe_gt_reset() which internally invokes xe_pm_runtime_get_noresume(). That function requires the caller to already hold an outer runtime PM reference and warns if none is held: [46.891177] xe 0000:03:00.0: [drm] Missing outer runtime PM protection [46.891178] WARNING: drivers/gpu/drm/xe/xe_pm.c:885 at xe_pm_runtime_get_noresume+0x8b/0xc0 Fix this by protecting xe_gt_reset() with the scope-based guard(xe_pm_runtime)(xe), which is the preferred form when the reference lifetime matches a single scope. v2: - Use scope-based guard(xe_pm_runtime)(xe) (Shuicheng) - Update commit message accordingly (cherry picked from commit 7937ea733f79b3f25e802a0c8360bf7423856f36)

In the Linux kernel, the following vulnerability has been resolved: ext2/dax: Fix ext2_setsize when len is page aligned PAGE_ALIGN(x) macro gives the next highest value which is multiple of pagesize. But if x is already page aligned then it simply returns x. So, if x passed is 0 in dax_zero_range() function, that means the length gets passed as 0 to ->iomap_begin(). In ext2 it then calls ext2_get_blocks -> max_blocks as 0 and hits bug_on here in ext2_get_blocks(). BUG_ON(maxblocks == 0); Instead we should be calling dax_truncate_page() here which takes care of it. i.e. it only calls dax_zero_range if the offset is not page/block aligned. This can be easily triggered with following on fsdax mounted pmem device. dd if=/dev/zero of=file count=1 bs=512 truncate -s 0 file [79.525838] EXT2-fs (pmem0): DAX enabled. Warning: EXPERIMENTAL, use at your own risk [79.529376] ext2 filesystem being mounted at /mnt1/test supports timestamps until 2038 (0x7fffffff) [93.793207] ------------[ cut here ]------------ [93.795102] kernel BUG at fs/ext2/inode.c:637! [93.796904] invalid opcode: 0000 [#1] PREEMPT SMP PTI [93.798659] CPU: 0 PID: 1192 Comm: truncate Not tainted 6.3.0-rc2-xfstests-00056-g131086faa369 #139 [93.806459] RIP: 0010:ext2_get_blocks.constprop.0+0x524/0x610 <...> [93.835298] Call Trace: [93.836253] <TASK> [93.837103] ? lock_acquire+0xf8/0x110 [93.838479] ? d_lookup+0x69/0xd0 [93.839779] ext2_iomap_begin+0xa7/0x1c0 [93.841154] iomap_iter+0xc7/0x150 [93.842425] dax_zero_range+0x6e/0xa0 [93.843813] ext2_setsize+0x176/0x1b0 [93.845164] ext2_setattr+0x151/0x200 [93.846467] notify_change+0x341/0x4e0 [93.847805] ? lock_acquire+0xf8/0x110 [93.849143] ? do_truncate+0x74/0xe0 [93.850452] ? do_truncate+0x84/0xe0 [93.851739] do_truncate+0x84/0xe0 [93.852974] do_sys_ftruncate+0x2b4/0x2f0 [93.854404] do_syscall_64+0x3f/0x90 [93.855789] entry_SYSCALL_64_after_hwframe+0x72/0xdc

In the Linux kernel, the following vulnerability has been resolved: scsi: hisi_sas: Grab sas_dev lock when traversing the members of sas_dev.list When freeing slots in function slot_complete_v3_hw(), it is possible that sas_dev.list is being traversed elsewhere, and it may trigger a NULL pointer exception, such as follows: ==>cq thread ==>scsi_eh_6 ==>scsi_error_handler() ==>sas_eh_handle_sas_errors() ==>sas_scsi_find_task() ==>lldd_abort_task() ==>slot_complete_v3_hw() ==>hisi_sas_abort_task() ==>hisi_sas_slot_task_free() ==>dereg_device_v3_hw() ==>list_del_init() ==>list_for_each_entry_safe() [ 7165.434918] sas: Enter sas_scsi_recover_host busy: 32 failed: 32 [ 7165.434926] sas: trying to find task 0x00000000769b5ba5 [ 7165.434927] sas: sas_scsi_find_task: aborting task 0x00000000769b5ba5 [ 7165.434940] hisi_sas_v3_hw 0000:b4:02.0: slot complete: task(00000000769b5ba5) aborted [ 7165.434964] hisi_sas_v3_hw 0000:b4:02.0: slot complete: task(00000000c9f7aa07) ignored [ 7165.434965] hisi_sas_v3_hw 0000:b4:02.0: slot complete: task(00000000e2a1cf01) ignored [ 7165.434968] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 7165.434972] hisi_sas_v3_hw 0000:b4:02.0: slot complete: task(0000000022d52d93) ignored [ 7165.434975] hisi_sas_v3_hw 0000:b4:02.0: slot complete: task(0000000066a7516c) ignored [ 7165.434976] Mem abort info: [ 7165.434982] ESR = 0x96000004 [ 7165.434991] Exception class = DABT (current EL), IL = 32 bits [ 7165.434992] SET = 0, FnV = 0 [ 7165.434993] EA = 0, S1PTW = 0 [ 7165.434994] Data abort info: [ 7165.434994] ISV = 0, ISS = 0x00000004 [ 7165.434995] CM = 0, WnR = 0 [ 7165.434997] user pgtable: 4k pages, 48-bit VAs, pgdp = 00000000f29543f2 [ 7165.434998] [0000000000000000] pgd=0000000000000000 [ 7165.435003] Internal error: Oops: 96000004 [#1] SMP [ 7165.439863] Process scsi_eh_6 (pid: 4109, stack limit = 0x00000000c43818d5) [ 7165.468862] pstate: 00c00009 (nzcv daif +PAN +UAO) [ 7165.473637] pc : dereg_device_v3_hw+0x68/0xa8 [hisi_sas_v3_hw] [ 7165.479443] lr : dereg_device_v3_hw+0x2c/0xa8 [hisi_sas_v3_hw] [ 7165.485247] sp : ffff00001d623bc0 [ 7165.488546] x29: ffff00001d623bc0 x28: ffffa027d03b9508 [ 7165.493835] x27: ffff80278ed50af0 x26: ffffa027dd31e0a8 [ 7165.499123] x25: ffffa027d9b27f88 x24: ffffa027d9b209f8 [ 7165.504411] x23: ffffa027c45b0d60 x22: ffff80278ec07c00 [ 7165.509700] x21: 0000000000000008 x20: ffffa027d9b209f8 [ 7165.514988] x19: ffffa027d9b27f88 x18: ffffffffffffffff [ 7165.520276] x17: 0000000000000000 x16: 0000000000000000 [ 7165.525564] x15: ffff0000091d9708 x14: ffff0000093b7dc8 [ 7165.530852] x13: ffff0000093b7a23 x12: 6e7265746e692067 [ 7165.536140] x11: 0000000000000000 x10: 0000000000000bb0 [ 7165.541429] x9 : ffff00001d6238f0 x8 : ffffa027d877af00 [ 7165.546718] x7 : ffffa027d6329600 x6 : ffff7e809f58ca00 [ 7165.552006] x5 : 0000000000001f8a x4 : 000000000000088e [ 7165.557295] x3 : ffffa027d9b27fa8 x2 : 0000000000000000 [ 7165.562583] x1 : 0000000000000000 x0 : 000000003000188e [ 7165.567872] Call trace: [ 7165.570309] dereg_device_v3_hw+0x68/0xa8 [hisi_sas_v3_hw] [ 7165.575775] hisi_sas_abort_task+0x248/0x358 [hisi_sas_main] [ 7165.581415] sas_eh_handle_sas_errors+0x258/0x8e0 [libsas] [ 7165.586876] sas_scsi_recover_host+0x134/0x458 [libsas] [ 7165.592082] scsi_error_handler+0xb4/0x488 [ 7165.596163] kthread+0x134/0x138 [ 7165.599380] ret_from_fork+0x10/0x18 [ 7165.602940] Code: d5033e9f b9000040 aa0103e2 eb03003f (f9400021) [ 7165.609004] kernel fault(0x1) notification starting on CPU 75 [ 7165.700728] ---[ end trace fc042cbbea224efc ]--- [ 7165.705326] Kernel panic - not syncing: Fatal exception To fix the issue, grab sas_dev lock when traversing the members of sas_dev.list in dereg_device_v3_hw() and hisi_sas_release_tasks() to avoid concurrency of adding and deleting member. When ---truncated---

In the Linux kernel, the following vulnerability has been resolved: xfrm: Zero padding when dumping algos and encap When copying data to user-space we should ensure that only valid data is copied over. Padding in structures may be filled with random (possibly sensitve) data and should never be given directly to user-space. This patch fixes the copying of xfrm algorithms and the encap template in xfrm_user so that padding is zeroed.

In the Linux kernel, the following vulnerability has been resolved: x86/resctrl: Clear staged_config[] before and after it is used As a temporary storage, staged_config[] in rdt_domain should be cleared before and after it is used. The stale value in staged_config[] could cause an MSR access error. Here is a reproducer on a system with 16 usable CLOSIDs for a 15-way L3 Cache (MBA should be disabled if the number of CLOSIDs for MB is less than 16.) : mount -t resctrl resctrl -o cdp /sys/fs/resctrl mkdir /sys/fs/resctrl/p{1..7} umount /sys/fs/resctrl/ mount -t resctrl resctrl /sys/fs/resctrl mkdir /sys/fs/resctrl/p{1..8} An error occurs when creating resource group named p8: unchecked MSR access error: WRMSR to 0xca0 (tried to write 0x00000000000007ff) at rIP: 0xffffffff82249142 (cat_wrmsr+0x32/0x60) Call Trace: <IRQ> __flush_smp_call_function_queue+0x11d/0x170 __sysvec_call_function+0x24/0xd0 sysvec_call_function+0x89/0xc0 </IRQ> <TASK> asm_sysvec_call_function+0x16/0x20 When creating a new resource control group, hardware will be configured by the following process: rdtgroup_mkdir() rdtgroup_mkdir_ctrl_mon() rdtgroup_init_alloc() resctrl_arch_update_domains() resctrl_arch_update_domains() iterates and updates all resctrl_conf_type whose have_new_ctrl is true. Since staged_config[] holds the same values as when CDP was enabled, it will continue to update the CDP_CODE and CDP_DATA configurations. When group p8 is created, get_config_index() called in resctrl_arch_update_domains() will return 16 and 17 as the CLOSIDs for CDP_CODE and CDP_DATA, which will be translated to an invalid register - 0xca0 in this scenario. Fix it by clearing staged_config[] before and after it is used. [reinette: re-order commit tags]

In the Linux kernel, the following vulnerability has been resolved: USB: Gadget: core: Help prevent panic during UVC unconfigure Avichal Rakesh reported a kernel panic that occurred when the UVC gadget driver was removed from a gadget's configuration. The panic involves a somewhat complicated interaction between the kernel driver and a userspace component (as described in the Link tag below), but the analysis did make one thing clear: The Gadget core should accomodate gadget drivers calling usb_gadget_deactivate() as part of their unbind procedure. Currently this doesn't work. gadget_unbind_driver() calls driver->unbind() while holding the udc->connect_lock mutex, and usb_gadget_deactivate() attempts to acquire that mutex, which will result in a deadlock. The simple fix is for gadget_unbind_driver() to release the mutex when invoking the ->unbind() callback. There is no particular reason for it to be holding the mutex at that time, and the mutex isn't held while the ->bind() callback is invoked. So we'll drop the mutex before performing the unbind callback and reacquire it afterward. We'll also add a couple of comments to usb_gadget_activate() and usb_gadget_deactivate(). Because they run in process context they must not be called from a gadget driver's ->disconnect() callback, which (according to the kerneldoc for struct usb_gadget_driver in include/linux/usb/gadget.h) may run in interrupt context. This may help prevent similar bugs from arising in the future.

In the Linux kernel, the following vulnerability has been resolved: blk-cgroup: Reinit blkg_iostat_set after clearing in blkcg_reset_stats() When blkg_alloc() is called to allocate a blkcg_gq structure with the associated blkg_iostat_set's, there are 2 fields within blkg_iostat_set that requires proper initialization - blkg & sync. The former field was introduced by commit 3b8cc6298724 ("blk-cgroup: Optimize blkcg_rstat_flush()") while the later one was introduced by commit f73316482977 ("blk-cgroup: reimplement basic IO stats using cgroup rstat"). Unfortunately those fields in the blkg_iostat_set's are not properly re-initialized when they are cleared in v1's blkcg_reset_stats(). This can lead to a kernel panic due to NULL pointer access of the blkg pointer. The missing initialization of sync is less problematic and can be a problem in a debug kernel due to missing lockdep initialization. Fix these problems by re-initializing them after memory clearing.

In the Linux kernel, the following vulnerability has been resolved: remoteproc: imx_dsp_rproc: Add custom memory copy implementation for i.MX DSP Cores The IRAM is part of the HiFi DSP. According to hardware specification only 32-bits write are allowed otherwise we get a Kernel panic. Therefore add a custom memory copy and memset functions to deal with the above restriction.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: drop gfx_v11_0_cp_ecc_error_irq_funcs The gfx.cp_ecc_error_irq is retired in gfx11. In gfx_v11_0_hw_fini still use amdgpu_irq_put to disable this interrupt, which caused the call trace in this function. [ 102.873958] Call Trace: [ 102.873959] <TASK> [ 102.873961] gfx_v11_0_hw_fini+0x23/0x1e0 [amdgpu] [ 102.874019] gfx_v11_0_suspend+0xe/0x20 [amdgpu] [ 102.874072] amdgpu_device_ip_suspend_phase2+0x240/0x460 [amdgpu] [ 102.874122] amdgpu_device_ip_suspend+0x3d/0x80 [amdgpu] [ 102.874172] amdgpu_device_pre_asic_reset+0xd9/0x490 [amdgpu] [ 102.874223] amdgpu_device_gpu_recover.cold+0x548/0xce6 [amdgpu] [ 102.874321] amdgpu_debugfs_reset_work+0x4c/0x70 [amdgpu] [ 102.874375] process_one_work+0x21f/0x3f0 [ 102.874377] worker_thread+0x200/0x3e0 [ 102.874378] ? process_one_work+0x3f0/0x3f0 [ 102.874379] kthread+0xfd/0x130 [ 102.874380] ? kthread_complete_and_exit+0x20/0x20 [ 102.874381] ret_from_fork+0x22/0x30 v2: - Handle umc and gfx ras cases in separated patch - Retired the gfx_v11_0_cp_ecc_error_irq_funcs in gfx11 v3: - Improve the subject and code comments - Add judgment on gfx11 in the function of amdgpu_gfx_ras_late_init v4: - Drop the define of CP_ME1_PIPE_INST_ADDR_INTERVAL and SET_ECC_ME_PIPE_STATE which using in gfx_v11_0_set_cp_ecc_error_state - Check cp_ecc_error_irq.funcs rather than ip version for a more sustainable life v5: - Simplify judgment conditions

In the Linux kernel, the following vulnerability has been resolved: ubi: ubi_wl_put_peb: Fix infinite loop when wear-leveling work failed Following process will trigger an infinite loop in ubi_wl_put_peb(): ubifs_bgt ubi_bgt ubifs_leb_unmap ubi_leb_unmap ubi_eba_unmap_leb ubi_wl_put_peb wear_leveling_worker e1 = rb_entry(rb_first(&ubi->used) e2 = get_peb_for_wl(ubi) ubi_io_read_vid_hdr // return err (flash fault) out_error: ubi->move_from = ubi->move_to = NULL wl_entry_destroy(ubi, e1) ubi->lookuptbl[e->pnum] = NULL retry: e = ubi->lookuptbl[pnum]; // return NULL if (e == ubi->move_from) { // NULL == NULL gets true goto retry; // infinite loop !!! $ top PID USER PR NI VIRT RES SHR S %CPU %MEM COMMAND 7676 root 20 0 0 0 0 R 100.0 0.0 ubifs_bgt0_0 Fix it by: 1) Letting ubi_wl_put_peb() returns directly if wearl leveling entry has been removed from 'ubi->lookuptbl'. 2) Using 'ubi->wl_lock' protecting wl entry deletion to preventing an use-after-free problem for wl entry in ubi_wl_put_peb(). Fetch a reproducer in [Link].

In the Linux kernel, the following vulnerability has been resolved: btrfs: don't check PageError in __extent_writepage __extent_writepage currenly sets PageError whenever any error happens, and the also checks for PageError to decide if to call error handling. This leads to very unclear responsibility for cleaning up on errors. In the VM and generic writeback helpers the basic idea is that once I/O is fired off all error handling responsibility is delegated to the end I/O handler. But if that end I/O handler sets the PageError bit, and the submitter checks it, the bit could in some cases leak into the submission context for fast enough I/O. Fix this by simply not checking PageError and just using the local ret variable to check for submission errors. This also fundamentally solves the long problem documented in a comment in __extent_writepage by never leaking the error bit into the submission context.

In the Linux kernel, the following vulnerability has been resolved: net/smc: fix deadlock triggered by cancel_delayed_work_syn() The following LOCKDEP was detected: Workqueue: events smc_lgr_free_work [smc] WARNING: possible circular locking dependency detected 6.1.0-20221027.rc2.git8.56bc5b569087.300.fc36.s390x+debug #1 Not tainted ------------------------------------------------------ kworker/3:0/176251 is trying to acquire lock: 00000000f1467148 ((wq_completion)smc_tx_wq-00000000#2){+.+.}-{0:0}, at: __flush_workqueue+0x7a/0x4f0 but task is already holding lock: 0000037fffe97dc8 ((work_completion)(&(&lgr->free_work)->work)){+.+.}-{0:0}, at: process_one_work+0x232/0x730 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #4 ((work_completion)(&(&lgr->free_work)->work)){+.+.}-{0:0}: __lock_acquire+0x58e/0xbd8 lock_acquire.part.0+0xe2/0x248 lock_acquire+0xac/0x1c8 __flush_work+0x76/0xf0 __cancel_work_timer+0x170/0x220 __smc_lgr_terminate.part.0+0x34/0x1c0 [smc] smc_connect_rdma+0x15e/0x418 [smc] __smc_connect+0x234/0x480 [smc] smc_connect+0x1d6/0x230 [smc] __sys_connect+0x90/0xc0 __do_sys_socketcall+0x186/0x370 __do_syscall+0x1da/0x208 system_call+0x82/0xb0 -> #3 (smc_client_lgr_pending){+.+.}-{3:3}: __lock_acquire+0x58e/0xbd8 lock_acquire.part.0+0xe2/0x248 lock_acquire+0xac/0x1c8 __mutex_lock+0x96/0x8e8 mutex_lock_nested+0x32/0x40 smc_connect_rdma+0xa4/0x418 [smc] __smc_connect+0x234/0x480 [smc] smc_connect+0x1d6/0x230 [smc] __sys_connect+0x90/0xc0 __do_sys_socketcall+0x186/0x370 __do_syscall+0x1da/0x208 system_call+0x82/0xb0 -> #2 (sk_lock-AF_SMC){+.+.}-{0:0}: __lock_acquire+0x58e/0xbd8 lock_acquire.part.0+0xe2/0x248 lock_acquire+0xac/0x1c8 lock_sock_nested+0x46/0xa8 smc_tx_work+0x34/0x50 [smc] process_one_work+0x30c/0x730 worker_thread+0x62/0x420 kthread+0x138/0x150 __ret_from_fork+0x3c/0x58 ret_from_fork+0xa/0x40 -> #1 ((work_completion)(&(&smc->conn.tx_work)->work)){+.+.}-{0:0}: __lock_acquire+0x58e/0xbd8 lock_acquire.part.0+0xe2/0x248 lock_acquire+0xac/0x1c8 process_one_work+0x2bc/0x730 worker_thread+0x62/0x420 kthread+0x138/0x150 __ret_from_fork+0x3c/0x58 ret_from_fork+0xa/0x40 -> #0 ((wq_completion)smc_tx_wq-00000000#2){+.+.}-{0:0}: check_prev_add+0xd8/0xe88 validate_chain+0x70c/0xb20 __lock_acquire+0x58e/0xbd8 lock_acquire.part.0+0xe2/0x248 lock_acquire+0xac/0x1c8 __flush_workqueue+0xaa/0x4f0 drain_workqueue+0xaa/0x158 destroy_workqueue+0x44/0x2d8 smc_lgr_free+0x9e/0xf8 [smc] process_one_work+0x30c/0x730 worker_thread+0x62/0x420 kthread+0x138/0x150 __ret_from_fork+0x3c/0x58 ret_from_fork+0xa/0x40 other info that might help us debug this: Chain exists of: (wq_completion)smc_tx_wq-00000000#2 --> smc_client_lgr_pending --> (work_completion)(&(&lgr->free_work)->work) Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock((work_completion)(&(&lgr->free_work)->work)); lock(smc_client_lgr_pending); lock((work_completion) (&(&lgr->free_work)->work)); lock((wq_completion)smc_tx_wq-00000000#2); *** DEADLOCK *** 2 locks held by kworker/3:0/176251: #0: 0000000080183548 ((wq_completion)events){+.+.}-{0:0}, at: process_one_work+0x232/0x730 #1: 0000037fffe97dc8 ((work_completion) (&(&lgr->free_work)->work)){+.+.}-{0:0}, at: process_one_work+0x232/0x730 stack backtr ---truncated---

In the Linux kernel, the following vulnerability has been resolved: btrfs: set_page_extent_mapped after read_folio in btrfs_cont_expand While trying to get the subpage blocksize tests running, I hit the following panic on generic/476 assertion failed: PagePrivate(page) && page->private, in fs/btrfs/subpage.c:229 kernel BUG at fs/btrfs/subpage.c:229! Internal error: Oops - BUG: 00000000f2000800 [#1] SMP CPU: 1 PID: 1453 Comm: fsstress Not tainted 6.4.0-rc7+ #12 Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20230301gitf80f052277c8-26.fc38 03/01/2023 pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) pc : btrfs_subpage_assert+0xbc/0xf0 lr : btrfs_subpage_assert+0xbc/0xf0 Call trace: btrfs_subpage_assert+0xbc/0xf0 btrfs_subpage_clear_checked+0x38/0xc0 btrfs_page_clear_checked+0x48/0x98 btrfs_truncate_block+0x5d0/0x6a8 btrfs_cont_expand+0x5c/0x528 btrfs_write_check.isra.0+0xf8/0x150 btrfs_buffered_write+0xb4/0x760 btrfs_do_write_iter+0x2f8/0x4b0 btrfs_file_write_iter+0x1c/0x30 do_iter_readv_writev+0xc8/0x158 do_iter_write+0x9c/0x210 vfs_iter_write+0x24/0x40 iter_file_splice_write+0x224/0x390 direct_splice_actor+0x38/0x68 splice_direct_to_actor+0x12c/0x260 do_splice_direct+0x90/0xe8 generic_copy_file_range+0x50/0x90 vfs_copy_file_range+0x29c/0x470 __arm64_sys_copy_file_range+0xcc/0x498 invoke_syscall.constprop.0+0x80/0xd8 do_el0_svc+0x6c/0x168 el0_svc+0x50/0x1b0 el0t_64_sync_handler+0x114/0x120 el0t_64_sync+0x194/0x198 This happens because during btrfs_cont_expand we'll get a page, set it as mapped, and if it's not Uptodate we'll read it. However between the read and re-locking the page we could have called release_folio() on the page, but left the page in the file mapping. release_folio() can clear the page private, and thus further down we blow up when we go to modify the subpage bits. Fix this by putting the set_page_extent_mapped() after the read. This is safe because read_folio() will call set_page_extent_mapped() before it does the read, and then if we clear page private but leave it on the mapping we're completely safe re-setting set_page_extent_mapped(). With this patch I can now run generic/476 without panicing.

In the Linux kernel, the following vulnerability has been resolved: drm/client: Fix memory leak in drm_client_modeset_probe When a new mode is set to modeset->mode, the previous mode should be freed. This fixes the following kmemleak report: drm_mode_duplicate+0x45/0x220 [drm] drm_client_modeset_probe+0x944/0xf50 [drm] __drm_fb_helper_initial_config_and_unlock+0xb4/0x2c0 [drm_kms_helper] drm_fbdev_client_hotplug+0x2bc/0x4d0 [drm_kms_helper] drm_client_register+0x169/0x240 [drm] ast_pci_probe+0x142/0x190 [ast] local_pci_probe+0xdc/0x180 work_for_cpu_fn+0x4e/0xa0 process_one_work+0x8b7/0x1540 worker_thread+0x70a/0xed0 kthread+0x29f/0x340 ret_from_fork+0x1f/0x30

In the Linux kernel, the following vulnerability has been resolved: scsi: mpi3mr: Fix expander node leak in mpi3mr_remove() Add a missing resource clean up in .remove.

In the Linux kernel, the following vulnerability has been resolved: tracing: Free error logs of tracing instances When a tracing instance is removed, the error messages that hold errors that occurred in the instance needs to be freed. The following reports a memory leak: # cd /sys/kernel/tracing # mkdir instances/foo # echo 'hist:keys=x' > instances/foo/events/sched/sched_switch/trigger # cat instances/foo/error_log [ 117.404795] hist:sched:sched_switch: error: Couldn't find field Command: hist:keys=x ^ # rmdir instances/foo Then check for memory leaks: # echo scan > /sys/kernel/debug/kmemleak # cat /sys/kernel/debug/kmemleak unreferenced object 0xffff88810d8ec700 (size 192): comm "bash", pid 869, jiffies 4294950577 (age 215.752s) hex dump (first 32 bytes): 60 dd 68 61 81 88 ff ff 60 dd 68 61 81 88 ff ff `.ha....`.ha.... a0 30 8c 83 ff ff ff ff 26 00 0a 00 00 00 00 00 .0......&....... backtrace: [<00000000dae26536>] kmalloc_trace+0x2a/0xa0 [<00000000b2938940>] tracing_log_err+0x277/0x2e0 [<000000004a0e1b07>] parse_atom+0x966/0xb40 [<0000000023b24337>] parse_expr+0x5f3/0xdb0 [<00000000594ad074>] event_hist_trigger_parse+0x27f8/0x3560 [<00000000293a9645>] trigger_process_regex+0x135/0x1a0 [<000000005c22b4f2>] event_trigger_write+0x87/0xf0 [<000000002cadc509>] vfs_write+0x162/0x670 [<0000000059c3b9be>] ksys_write+0xca/0x170 [<00000000f1cddc00>] do_syscall_64+0x3e/0xc0 [<00000000868ac68c>] entry_SYSCALL_64_after_hwframe+0x72/0xdc unreferenced object 0xffff888170c35a00 (size 32): comm "bash", pid 869, jiffies 4294950577 (age 215.752s) hex dump (first 32 bytes): 0a 20 20 43 6f 6d 6d 61 6e 64 3a 20 68 69 73 74 . Command: hist 3a 6b 65 79 73 3d 78 0a 00 00 00 00 00 00 00 00 :keys=x......... backtrace: [<000000006a747de5>] __kmalloc+0x4d/0x160 [<000000000039df5f>] tracing_log_err+0x29b/0x2e0 [<000000004a0e1b07>] parse_atom+0x966/0xb40 [<0000000023b24337>] parse_expr+0x5f3/0xdb0 [<00000000594ad074>] event_hist_trigger_parse+0x27f8/0x3560 [<00000000293a9645>] trigger_process_regex+0x135/0x1a0 [<000000005c22b4f2>] event_trigger_write+0x87/0xf0 [<000000002cadc509>] vfs_write+0x162/0x670 [<0000000059c3b9be>] ksys_write+0xca/0x170 [<00000000f1cddc00>] do_syscall_64+0x3e/0xc0 [<00000000868ac68c>] entry_SYSCALL_64_after_hwframe+0x72/0xdc The problem is that the error log needs to be freed when the instance is removed.

In the Linux kernel, the following vulnerability has been resolved: ext4: fix i_disksize exceeding i_size problem in paritally written case It is possible for i_disksize can exceed i_size, triggering a warning. generic_perform_write copied = iov_iter_copy_from_user_atomic(len) // copied < len ext4_da_write_end | ext4_update_i_disksize | new_i_size = pos + copied; | WRITE_ONCE(EXT4_I(inode)->i_disksize, newsize) // update i_disksize | generic_write_end | copied = block_write_end(copied, len) // copied = 0 | if (unlikely(copied < len)) | if (!PageUptodate(page)) | copied = 0; | if (pos + copied > inode->i_size) // return false if (unlikely(copied == 0)) goto again; if (unlikely(iov_iter_fault_in_readable(i, bytes))) { status = -EFAULT; break; } We get i_disksize greater than i_size here, which could trigger WARNING check 'i_size_read(inode) < EXT4_I(inode)->i_disksize' while doing dio: ext4_dio_write_iter iomap_dio_rw __iomap_dio_rw // return err, length is not aligned to 512 ext4_handle_inode_extension WARN_ON_ONCE(i_size_read(inode) < EXT4_I(inode)->i_disksize) // Oops WARNING: CPU: 2 PID: 2609 at fs/ext4/file.c:319 CPU: 2 PID: 2609 Comm: aa Not tainted 6.3.0-rc2 RIP: 0010:ext4_file_write_iter+0xbc7 Call Trace: vfs_write+0x3b1 ksys_write+0x77 do_syscall_64+0x39 Fix it by updating 'copied' value before updating i_disksize just like ext4_write_inline_data_end() does. A reproducer can be found in the buganizer link below.

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix deadlock when aborting transaction during relocation with scrub Before relocating a block group we pause scrub, then do the relocation and then unpause scrub. The relocation process requires starting and committing a transaction, and if we have a failure in the critical section of the transaction commit path (transaction state >= TRANS_STATE_COMMIT_START), we will deadlock if there is a paused scrub. That results in stack traces like the following: [42.479] BTRFS info (device sdc): relocating block group 53876686848 flags metadata|raid6 [42.936] BTRFS warning (device sdc): Skipping commit of aborted transaction. [42.936] ------------[ cut here ]------------ [42.936] BTRFS: Transaction aborted (error -28) [42.936] WARNING: CPU: 11 PID: 346822 at fs/btrfs/transaction.c:1977 btrfs_commit_transaction+0xcc8/0xeb0 [btrfs] [42.936] Modules linked in: dm_flakey dm_mod loop btrfs (...) [42.936] CPU: 11 PID: 346822 Comm: btrfs Tainted: G W 6.3.0-rc2-btrfs-next-127+ #1 [42.936] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [42.936] RIP: 0010:btrfs_commit_transaction+0xcc8/0xeb0 [btrfs] [42.936] Code: ff ff 45 8b (...) [42.936] RSP: 0018:ffffb58649633b48 EFLAGS: 00010282 [42.936] RAX: 0000000000000000 RBX: ffff8be6ef4d5bd8 RCX: 0000000000000000 [42.936] RDX: 0000000000000002 RSI: ffffffffb35e7782 RDI: 00000000ffffffff [42.936] RBP: ffff8be6ef4d5c98 R08: 0000000000000000 R09: ffffb586496339e8 [42.936] R10: 0000000000000001 R11: 0000000000000001 R12: ffff8be6d38c7c00 [42.936] R13: 00000000ffffffe4 R14: ffff8be6c268c000 R15: ffff8be6ef4d5cf0 [42.936] FS: 00007f381a82b340(0000) GS:ffff8beddfcc0000(0000) knlGS:0000000000000000 [42.936] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [42.936] CR2: 00007f1e35fb7638 CR3: 0000000117680006 CR4: 0000000000370ee0 [42.936] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [42.936] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [42.936] Call Trace: [42.936] <TASK> [42.936] ? start_transaction+0xcb/0x610 [btrfs] [42.936] prepare_to_relocate+0x111/0x1a0 [btrfs] [42.936] relocate_block_group+0x57/0x5d0 [btrfs] [42.936] ? btrfs_wait_nocow_writers+0x25/0xb0 [btrfs] [42.936] btrfs_relocate_block_group+0x248/0x3c0 [btrfs] [42.936] ? __pfx_autoremove_wake_function+0x10/0x10 [42.936] btrfs_relocate_chunk+0x3b/0x150 [btrfs] [42.936] btrfs_balance+0x8ff/0x11d0 [btrfs] [42.936] ? __kmem_cache_alloc_node+0x14a/0x410 [42.936] btrfs_ioctl+0x2334/0x32c0 [btrfs] [42.937] ? mod_objcg_state+0xd2/0x360 [42.937] ? refill_obj_stock+0xb0/0x160 [42.937] ? seq_release+0x25/0x30 [42.937] ? __rseq_handle_notify_resume+0x3b5/0x4b0 [42.937] ? percpu_counter_add_batch+0x2e/0xa0 [42.937] ? __x64_sys_ioctl+0x88/0xc0 [42.937] __x64_sys_ioctl+0x88/0xc0 [42.937] do_syscall_64+0x38/0x90 [42.937] entry_SYSCALL_64_after_hwframe+0x72/0xdc [42.937] RIP: 0033:0x7f381a6ffe9b [42.937] Code: 00 48 89 44 24 (...) [42.937] RSP: 002b:00007ffd45ecf060 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [42.937] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f381a6ffe9b [42.937] RDX: 00007ffd45ecf150 RSI: 00000000c4009420 RDI: 0000000000000003 [42.937] RBP: 0000000000000003 R08: 0000000000000013 R09: 0000000000000000 [42.937] R10: 00007f381a60c878 R11: 0000000000000246 R12: 00007ffd45ed0423 [42.937] R13: 00007ffd45ecf150 R14: 0000000000000000 R15: 00007ffd45ecf148 [42.937] </TASK> [42.937] ---[ end trace 0000000000000000 ]--- [42.937] BTRFS: error (device sdc: state A) in cleanup_transaction:1977: errno=-28 No space left [59.196] INFO: task btrfs:346772 blocked for more than 120 seconds. [59.196] Tainted: G W 6.3.0-rc2-btrfs-next-127+ #1 [59.196] "echo 0 > /proc/sys/kernel/hung_ ---truncated---

In the Linux kernel, the following vulnerability has been resolved: blk-mq: fix NULL dereference on q->elevator in blk_mq_elv_switch_none After grabbing q->sysfs_lock, q->elevator may become NULL because of elevator switch. Fix the NULL dereference on q->elevator by checking it with lock.

In the Linux kernel, the following vulnerability has been resolved: accel/habanalabs: fix mem leak in capture user mappings This commit fixes a memory leak caused when clearing the user_mappings info when a new context is opened immediately after user_mapping is captured and a hard reset is performed.

In the Linux kernel, the following vulnerability has been resolved: x86: fix clear_user_rep_good() exception handling annotation This code no longer exists in mainline, because it was removed in commit d2c95f9d6802 ("x86: don't use REP_GOOD or ERMS for user memory clearing") upstream. However, rather than backport the full range of x86 memory clearing and copying cleanups, fix the exception table annotation placement for the final 'rep movsb' in clear_user_rep_good(): rather than pointing at the actual instruction that did the user space access, it pointed to the register move just before it. That made sense from a code flow standpoint, but not from an actual usage standpoint: it means that if user access takes an exception, the exception handler won't actually find the instruction in the exception tables. As a result, rather than fixing it up and returning -EFAULT, it would then turn it into a kernel oops report instead, something like: BUG: unable to handle page fault for address: 0000000020081000 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page ... RIP: 0010:clear_user_rep_good+0x1c/0x30 arch/x86/lib/clear_page_64.S:147 ... Call Trace: __clear_user arch/x86/include/asm/uaccess_64.h:103 [inline] clear_user arch/x86/include/asm/uaccess_64.h:124 [inline] iov_iter_zero+0x709/0x1290 lib/iov_iter.c:800 iomap_dio_hole_iter fs/iomap/direct-io.c:389 [inline] iomap_dio_iter fs/iomap/direct-io.c:440 [inline] __iomap_dio_rw+0xe3d/0x1cd0 fs/iomap/direct-io.c:601 iomap_dio_rw+0x40/0xa0 fs/iomap/direct-io.c:689 ext4_dio_read_iter fs/ext4/file.c:94 [inline] ext4_file_read_iter+0x4be/0x690 fs/ext4/file.c:145 call_read_iter include/linux/fs.h:2183 [inline] do_iter_readv_writev+0x2e0/0x3b0 fs/read_write.c:733 do_iter_read+0x2f2/0x750 fs/read_write.c:796 vfs_readv+0xe5/0x150 fs/read_write.c:916 do_preadv+0x1b6/0x270 fs/read_write.c:1008 __do_sys_preadv2 fs/read_write.c:1070 [inline] __se_sys_preadv2 fs/read_write.c:1061 [inline] __x64_sys_preadv2+0xef/0x150 fs/read_write.c:1061 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd which then looks like a filesystem bug rather than the incorrect exception annotation that it is. [ The alternative to this one-liner fix is to take the upstream series that cleans this all up: 68674f94ffc9 ("x86: don't use REP_GOOD or ERMS for small memory copies") 20f3337d350c ("x86: don't use REP_GOOD or ERMS for small memory clearing") adfcf4231b8c ("x86: don't use REP_GOOD or ERMS for user memory copies") * d2c95f9d6802 ("x86: don't use REP_GOOD or ERMS for user memory clearing") 3639a535587d ("x86: move stac/clac from user copy routines into callers") 577e6a7fd50d ("x86: inline the 'rep movs' in user copies for the FSRM case") 8c9b6a88b7e2 ("x86: improve on the non-rep 'clear_user' function") 427fda2c8a49 ("x86: improve on the non-rep 'copy_user' function") * e046fe5a36a9 ("x86: set FSRS automatically on AMD CPUs that have FSRM") e1f2750edc4a ("x86: remove 'zerorest' argument from __copy_user_nocache()") 034ff37d3407 ("x86: rewrite '__copy_user_nocache' function") with either the whole series or at a minimum the two marked commits being needed to fix this issue ]

In the Linux kernel, the following vulnerability has been resolved: iommufd/selftest: Catch overflow of uptr and length syzkaller hits a WARN_ON when trying to have a uptr close to UINTPTR_MAX: WARNING: CPU: 1 PID: 393 at drivers/iommu/iommufd/selftest.c:403 iommufd_test+0xb19/0x16f0 Modules linked in: CPU: 1 PID: 393 Comm: repro Not tainted 6.2.0-c9c3395d5e3d #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:iommufd_test+0xb19/0x16f0 Code: 94 c4 31 ff 44 89 e6 e8 a5 54 17 ff 45 84 e4 0f 85 bb 0b 00 00 41 be fb ff ff ff e8 31 53 17 ff e9 a0 f7 ff ff e8 27 53 17 ff <0f> 0b 41 be 8 RSP: 0018:ffffc90000eabdc0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff8214c487 RDX: 0000000000000000 RSI: ffff88800f5c8000 RDI: 0000000000000002 RBP: ffffc90000eabe48 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: 00000000cd2b0000 R13: 00000000cd2af000 R14: 0000000000000000 R15: ffffc90000eabe68 FS: 00007f94d76d5740(0000) GS:ffff88807dd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000043 CR3: 0000000006880006 CR4: 0000000000770ee0 PKRU: 55555554 Call Trace: <TASK> ? write_comp_data+0x2f/0x90 iommufd_fops_ioctl+0x1ef/0x310 __x64_sys_ioctl+0x10e/0x160 ? __pfx_iommufd_fops_ioctl+0x10/0x10 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc Check that the user memory range doesn't overflow.

In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Avoid order-5 memory allocation for TPA data The driver needs to keep track of all the possible concurrent TPA (GRO/LRO) completions on the aggregation ring. On P5 chips, the maximum number of concurrent TPA is 256 and the amount of memory we allocate is order-5 on systems using 4K pages. Memory allocation failure has been reported: NetworkManager: page allocation failure: order:5, mode:0x40dc0(GFP_KERNEL|__GFP_COMP|__GFP_ZERO), nodemask=(null),cpuset=/,mems_allowed=0-1 CPU: 15 PID: 2995 Comm: NetworkManager Kdump: loaded Not tainted 5.10.156 #1 Hardware name: Dell Inc. PowerEdge R660/0M1CC5, BIOS 0.2.25 08/12/2022 Call Trace: dump_stack+0x57/0x6e warn_alloc.cold.120+0x7b/0xdd ? _cond_resched+0x15/0x30 ? __alloc_pages_direct_compact+0x15f/0x170 __alloc_pages_slowpath.constprop.108+0xc58/0xc70 __alloc_pages_nodemask+0x2d0/0x300 kmalloc_order+0x24/0xe0 kmalloc_order_trace+0x19/0x80 bnxt_alloc_mem+0x1150/0x15c0 [bnxt_en] ? bnxt_get_func_stat_ctxs+0x13/0x60 [bnxt_en] __bnxt_open_nic+0x12e/0x780 [bnxt_en] bnxt_open+0x10b/0x240 [bnxt_en] __dev_open+0xe9/0x180 __dev_change_flags+0x1af/0x220 dev_change_flags+0x21/0x60 do_setlink+0x35c/0x1100 Instead of allocating this big chunk of memory and dividing it up for the concurrent TPA instances, allocate each small chunk separately for each TPA instance. This will reduce it to order-0 allocations.

In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix unsafe drain work queue code If create_qp does not fully succeed it is possible for qp cleanup code to attempt to drain the send or recv work queues before the queues have been created causing a seg fault. This patch checks to see if the queues exist before attempting to drain them.

In the Linux kernel, the following vulnerability has been resolved: nilfs2: do not write dirty data after degenerating to read-only According to syzbot's report, mark_buffer_dirty() called from nilfs_segctor_do_construct() outputs a warning with some patterns after nilfs2 detects metadata corruption and degrades to read-only mode. After such read-only degeneration, page cache data may be cleared through nilfs_clear_dirty_page() which may also clear the uptodate flag for their buffer heads. However, even after the degeneration, log writes are still performed by unmount processing etc., which causes mark_buffer_dirty() to be called for buffer heads without the "uptodate" flag and causes the warning. Since any writes should not be done to a read-only file system in the first place, this fixes the warning in mark_buffer_dirty() by letting nilfs_segctor_do_construct() abort early if in read-only mode. This also changes the retry check of nilfs_segctor_write_out() to avoid unnecessary log write retries if it detects -EROFS that nilfs_segctor_do_construct() returned.

In the Linux kernel, the following vulnerability has been resolved: skbuff: skb_segment, Call zero copy functions before using skbuff frags Commit bf5c25d60861 ("skbuff: in skb_segment, call zerocopy functions once per nskb") added the call to zero copy functions in skb_segment(). The change introduced a bug in skb_segment() because skb_orphan_frags() may possibly change the number of fragments or allocate new fragments altogether leaving nrfrags and frag to point to the old values. This can cause a panic with stacktrace like the one below. [ 193.894380] BUG: kernel NULL pointer dereference, address: 00000000000000bc [ 193.895273] CPU: 13 PID: 18164 Comm: vh-net-17428 Kdump: loaded Tainted: G O 5.15.123+ #26 [ 193.903919] RIP: 0010:skb_segment+0xb0e/0x12f0 [ 194.021892] Call Trace: [ 194.027422] <TASK> [ 194.072861] tcp_gso_segment+0x107/0x540 [ 194.082031] inet_gso_segment+0x15c/0x3d0 [ 194.090783] skb_mac_gso_segment+0x9f/0x110 [ 194.095016] __skb_gso_segment+0xc1/0x190 [ 194.103131] netem_enqueue+0x290/0xb10 [sch_netem] [ 194.107071] dev_qdisc_enqueue+0x16/0x70 [ 194.110884] __dev_queue_xmit+0x63b/0xb30 [ 194.121670] bond_start_xmit+0x159/0x380 [bonding] [ 194.128506] dev_hard_start_xmit+0xc3/0x1e0 [ 194.131787] __dev_queue_xmit+0x8a0/0xb30 [ 194.138225] macvlan_start_xmit+0x4f/0x100 [macvlan] [ 194.141477] dev_hard_start_xmit+0xc3/0x1e0 [ 194.144622] sch_direct_xmit+0xe3/0x280 [ 194.147748] __dev_queue_xmit+0x54a/0xb30 [ 194.154131] tap_get_user+0x2a8/0x9c0 [tap] [ 194.157358] tap_sendmsg+0x52/0x8e0 [tap] [ 194.167049] handle_tx_zerocopy+0x14e/0x4c0 [vhost_net] [ 194.173631] handle_tx+0xcd/0xe0 [vhost_net] [ 194.176959] vhost_worker+0x76/0xb0 [vhost] [ 194.183667] kthread+0x118/0x140 [ 194.190358] ret_from_fork+0x1f/0x30 [ 194.193670] </TASK> In this case calling skb_orphan_frags() updated nr_frags leaving nrfrags local variable in skb_segment() stale. This resulted in the code hitting i >= nrfrags prematurely and trying to move to next frag_skb using list_skb pointer, which was NULL, and caused kernel panic. Move the call to zero copy functions before using frags and nr_frags.

In the Linux kernel, the following vulnerability has been resolved: soc: aspeed: socinfo: Add kfree for kstrdup Add kfree() in the later error handling in order to avoid memory leak.

In the Linux kernel, the following vulnerability has been resolved: arm64: acpi: Fix possible memory leak of ffh_ctxt Allocated 'ffh_ctxt' memory leak is possible if the SMCCC version and conduit checks fail and -EOPNOTSUPP is returned without freeing the allocated memory. Fix the same by moving the allocation after the SMCCC version and conduit checks.

In the Linux kernel, the following vulnerability has been resolved: PCI: hv: Fix a crash in hv_pci_restore_msi_msg() during hibernation When a Linux VM with an assigned PCI device runs on Hyper-V, if the PCI device driver is not loaded yet (i.e. MSI-X/MSI is not enabled on the device yet), doing a VM hibernation triggers a panic in hv_pci_restore_msi_msg() -> msi_lock_descs(&pdev->dev), because pdev->dev.msi.data is still NULL. Avoid the panic by checking if MSI-X/MSI is enabled.

In the Linux kernel, the following vulnerability has been resolved: x86/platform/uv: Use alternate source for socket to node data The UV code attempts to build a set of tables to allow it to do bidirectional socket<=>node lookups. But when nr_cpus is set to a smaller number than actually present, the cpu_to_node() mapping information for unused CPUs is not available to build_socket_tables(). This results in skipping some nodes or sockets when creating the tables and leaving some -1's for later code to trip. over, causing oopses. The problem is that the socket<=>node lookups are created by doing a loop over all CPUs, then looking up the CPU's APICID and socket. But if a CPU is not present, there is no way to start this lookup. Instead of looping over all CPUs, take CPUs out of the equation entirely. Loop over all APICIDs which are mapped to a valid NUMA node. Then just extract the socket-id from the APICID. This avoid tripping over disabled CPUs.

In the Linux kernel, the following vulnerability has been resolved: media: platform: mediatek: vpu: fix NULL ptr dereference If pdev is NULL, then it is still dereferenced. This fixes this smatch warning: drivers/media/platform/mediatek/vpu/mtk_vpu.c:570 vpu_load_firmware() warn: address of NULL pointer 'pdev'

In the Linux kernel, the following vulnerability has been resolved: hwmon: (pmbus_core) Fix NULL pointer dereference Pass i2c_client to _pmbus_is_enabled to drop the assumption that a regulator device is passed in. This will fix the issue of a NULL pointer dereference when called from _pmbus_get_flags.

In the Linux kernel, the following vulnerability has been resolved: drivers/perf: hisi: Don't migrate perf to the CPU going to teardown The driver needs to migrate the perf context if the current using CPU going to teardown. By the time calling the cpuhp::teardown() callback the cpu_online_mask() hasn't updated yet and still includes the CPU going to teardown. In current driver's implementation we may migrate the context to the teardown CPU and leads to the below calltrace: ... [ 368.104662][ T932] task:cpuhp/0 state:D stack: 0 pid: 15 ppid: 2 flags:0x00000008 [ 368.113699][ T932] Call trace: [ 368.116834][ T932] __switch_to+0x7c/0xbc [ 368.120924][ T932] __schedule+0x338/0x6f0 [ 368.125098][ T932] schedule+0x50/0xe0 [ 368.128926][ T932] schedule_preempt_disabled+0x18/0x24 [ 368.134229][ T932] __mutex_lock.constprop.0+0x1d4/0x5dc [ 368.139617][ T932] __mutex_lock_slowpath+0x1c/0x30 [ 368.144573][ T932] mutex_lock+0x50/0x60 [ 368.148579][ T932] perf_pmu_migrate_context+0x84/0x2b0 [ 368.153884][ T932] hisi_pcie_pmu_offline_cpu+0x90/0xe0 [hisi_pcie_pmu] [ 368.160579][ T932] cpuhp_invoke_callback+0x2a0/0x650 [ 368.165707][ T932] cpuhp_thread_fun+0xe4/0x190 [ 368.170316][ T932] smpboot_thread_fn+0x15c/0x1a0 [ 368.175099][ T932] kthread+0x108/0x13c [ 368.179012][ T932] ret_from_fork+0x10/0x18 ... Use function cpumask_any_but() to find one correct active cpu to fixes this issue.

In the Linux kernel, the following vulnerability has been resolved: io_uring: wait interruptibly for request completions on exit WHen the ring exits, cleanup is done and the final cancelation and waiting on completions is done by io_ring_exit_work. That function is invoked by kworker, which doesn't take any signals. Because of that, it doesn't really matter if we wait for completions in TASK_INTERRUPTIBLE or TASK_UNINTERRUPTIBLE state. However, it does matter to the hung task detection checker! Normally we expect cancelations and completions to happen rather quickly. Some test cases, however, will exit the ring and park the owning task stopped (eg via SIGSTOP). If the owning task needs to run task_work to complete requests, then io_ring_exit_work won't make any progress until the task is runnable again. Hence io_ring_exit_work can trigger the hung task detection, which is particularly problematic if panic-on-hung-task is enabled. As the ring exit doesn't take signals to begin with, have it wait interruptibly rather than uninterruptibly. io_uring has a separate stuck-exit warning that triggers independently anyway, so we're not really missing anything by making this switch.

In the Linux kernel, the following vulnerability has been resolved: tracing: Drain deferred trigger frees if kthread creation fails Boot-time trigger registration can fail before the trigger-data cleanup kthread exists. Deferring those frees until late init is fine, but the post-boot fallback must still drain the deferred list if kthread creation never succeeds. Otherwise, boot-deferred nodes can accumulate on trigger_data_free_list, later frees fall back to synchronously freeing only the current object, and the older queued entries are leaked forever. To trigger this, add the following to the kernel command line: trace_event=sched_switch trace_trigger=sched_switch.traceon,sched_switch.traceon The second traceon trigger will fail and be freed. This triggers a NULL pointer dereference and crashes the kernel. Keep the deferred boot-time behavior, but when kthread creation fails, drain the whole queued list synchronously. Do the same in the late-init drain path so queued entries are not stranded there either.

In the Linux kernel, the following vulnerability has been resolved: jbd2: check 'jh->b_transaction' before removing it from checkpoint Following process will corrupt ext4 image: Step 1: jbd2_journal_commit_transaction __jbd2_journal_insert_checkpoint(jh, commit_transaction) // Put jh into trans1->t_checkpoint_list journal->j_checkpoint_transactions = commit_transaction // Put trans1 into journal->j_checkpoint_transactions Step 2: do_get_write_access test_clear_buffer_dirty(bh) // clear buffer dirty，set jbd dirty __jbd2_journal_file_buffer(jh, transaction) // jh belongs to trans2 Step 3: drop_cache journal_shrink_one_cp_list jbd2_journal_try_remove_checkpoint if (!trylock_buffer(bh)) // lock bh, true if (buffer_dirty(bh)) // buffer is not dirty __jbd2_journal_remove_checkpoint(jh) // remove jh from trans1->t_checkpoint_list Step 4: jbd2_log_do_checkpoint trans1 = journal->j_checkpoint_transactions // jh is not in trans1->t_checkpoint_list jbd2_cleanup_journal_tail(journal) // trans1 is done Step 5: Power cut, trans2 is not committed, jh is lost in next mounting. Fix it by checking 'jh->b_transaction' before remove it from checkpoint.

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix warning in cifs_smb3_do_mount() This fixes the following warning reported by kernel test robot fs/smb/client/cifsfs.c:982 cifs_smb3_do_mount() warn: possible memory leak of 'cifs_sb'

In the Linux kernel, the following vulnerability has been resolved: team: prevent adding a device which is already a team device lower Prevent adding a device which is already a team device lower, e.g. adding veth0 if vlan1 was already added and veth0 is a lower of vlan1. This is not useful in practice and can lead to recursive locking: $ ip link add veth0 type veth peer name veth1 $ ip link set veth0 up $ ip link set veth1 up $ ip link add link veth0 name veth0.1 type vlan protocol 802.1Q id 1 $ ip link add team0 type team $ ip link set veth0.1 down $ ip link set veth0.1 master team0 team0: Port device veth0.1 added $ ip link set veth0 down $ ip link set veth0 master team0 ============================================ WARNING: possible recursive locking detected 6.13.0-rc2-virtme-00441-ga14a429069bb #46 Not tainted -------------------------------------------- ip/7684 is trying to acquire lock: ffff888016848e00 (team->team_lock_key){+.+.}-{4:4}, at: team_device_event (drivers/net/team/team_core.c:2928 drivers/net/team/team_core.c:2951 drivers/net/team/team_core.c:2973) but task is already holding lock: ffff888016848e00 (team->team_lock_key){+.+.}-{4:4}, at: team_add_slave (drivers/net/team/team_core.c:1147 drivers/net/team/team_core.c:1977) other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(team->team_lock_key); lock(team->team_lock_key); *** DEADLOCK *** May be due to missing lock nesting notation 2 locks held by ip/7684: stack backtrace: CPU: 3 UID: 0 PID: 7684 Comm: ip Not tainted 6.13.0-rc2-virtme-00441-ga14a429069bb #46 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:122) print_deadlock_bug.cold (kernel/locking/lockdep.c:3040) __lock_acquire (kernel/locking/lockdep.c:3893 kernel/locking/lockdep.c:5226) ? netlink_broadcast_filtered (net/netlink/af_netlink.c:1548) lock_acquire.part.0 (kernel/locking/lockdep.c:467 kernel/locking/lockdep.c:5851) ? team_device_event (drivers/net/team/team_core.c:2928 drivers/net/team/team_core.c:2951 drivers/net/team/team_core.c:2973) ? trace_lock_acquire (./include/trace/events/lock.h:24 (discriminator 2)) ? team_device_event (drivers/net/team/team_core.c:2928 drivers/net/team/team_core.c:2951 drivers/net/team/team_core.c:2973) ? lock_acquire (kernel/locking/lockdep.c:5822) ? team_device_event (drivers/net/team/team_core.c:2928 drivers/net/team/team_core.c:2951 drivers/net/team/team_core.c:2973) __mutex_lock (kernel/locking/mutex.c:587 kernel/locking/mutex.c:735) ? team_device_event (drivers/net/team/team_core.c:2928 drivers/net/team/team_core.c:2951 drivers/net/team/team_core.c:2973) ? team_device_event (drivers/net/team/team_core.c:2928 drivers/net/team/team_core.c:2951 drivers/net/team/team_core.c:2973) ? fib_sync_up (net/ipv4/fib_semantics.c:2167) ? team_device_event (drivers/net/team/team_core.c:2928 drivers/net/team/team_core.c:2951 drivers/net/team/team_core.c:2973) team_device_event (drivers/net/team/team_core.c:2928 drivers/net/team/team_core.c:2951 drivers/net/team/team_core.c:2973) notifier_call_chain (kernel/notifier.c:85) call_netdevice_notifiers_info (net/core/dev.c:1996) __dev_notify_flags (net/core/dev.c:8993) ? __dev_change_flags (net/core/dev.c:8975) dev_change_flags (net/core/dev.c:9027) vlan_device_event (net/8021q/vlan.c:85 net/8021q/vlan.c:470) ? br_device_event (net/bridge/br.c:143) notifier_call_chain (kernel/notifier.c:85) call_netdevice_notifiers_info (net/core/dev.c:1996) dev_open (net/core/dev.c:1519 net/core/dev.c:1505) team_add_slave (drivers/net/team/team_core.c:1219 drivers/net/team/team_core.c:1977) ? __pfx_team_add_slave (drivers/net/team/team_core.c:1972) do_set_master (net/core/rtnetlink.c:2917) do_setlink.isra.0 (net/core/rtnetlink.c:3117)

In the Linux kernel, the following vulnerability has been resolved: usb: ucsi_acpi: Increase the command completion timeout Commit 130a96d698d7 ("usb: typec: ucsi: acpi: Increase command completion timeout value") increased the timeout from 5 seconds to 60 seconds due to issues related to alternate mode discovery. After the alternate mode discovery switch to polled mode the timeout was reduced, but instead of being set back to 5 seconds it was reduced to 1 second. This is causing problems when using a Lenovo ThinkPad X1 yoga gen7 connected over Type-C to a LG 27UL850-W (charging DP over Type-C). When the monitor is already connected at boot the following error is logged: "PPM init failed (-110)", /sys/class/typec is empty and on unplugging the NULL pointer deref fixed earlier in this series happens. When the monitor is connected after boot the following error is logged instead: "GET_CONNECTOR_STATUS failed (-110)". Setting the timeout back to 5 seconds fixes both cases.

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: pcie: fix NULL pointer dereference in iwl_pcie_irq_rx_msix_handler() rxq can be NULL only when trans_pcie->rxq is NULL and entry->entry is zero. For the case when entry->entry is not equal to 0, rxq won't be NULL even if trans_pcie->rxq is NULL. Modify checker to check for trans_pcie->rxq.

In the Linux kernel, the following vulnerability has been resolved: ACPI: processor: Check for null return of devm_kzalloc() in fch_misc_setup() devm_kzalloc() may fail, clk_data->name might be NULL and will cause a NULL pointer dereference later. [ rjw: Subject and changelog edits ]

In the Linux kernel, the following vulnerability has been resolved: wifi: iwl3945: Add missing check for create_singlethread_workqueue Add the check for the return value of the create_singlethread_workqueue in order to avoid NULL pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: RDMA/cxgb4: Fix potential null-ptr-deref in pass_establish() If get_ep_from_tid() fails to lookup non-NULL value for ep, ep is dereferenced later regardless of whether it is empty. This patch adds a simple sanity check to fix the issue. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: nfsd: call op_release, even when op_func returns an error For ops with "trivial" replies, nfsd4_encode_operation will shortcut most of the encoding work and skip to just marshalling up the status. One of the things it skips is calling op_release. This could cause a memory leak in the layoutget codepath if there is an error at an inopportune time. Have the compound processing engine always call op_release, even when op_func sets an error in op->status. With this change, we also need nfsd4_block_get_device_info_scsi to set the gd_device pointer to NULL on error to avoid a double free.

In the Linux kernel, the following vulnerability has been resolved: USB: gadget: gr_udc: fix memory leak with using debugfs_lookup() When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.

In the Linux kernel, the following vulnerability has been resolved: firmware: stratix10-svc: Fix a potential resource leak in svc_create_memory_pool() svc_create_memory_pool() is only called from stratix10_svc_drv_probe(). Most of resources in the probe are managed, but not this memremap() call. There is also no memunmap() call in the file. So switch to devm_memremap() to avoid a resource leak.