In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix use-after-free in ath12k_dp_cc_cleanup() During ath12k module removal, in ath12k_core_deinit(), ath12k_mac_destroy() un-registers ah->hw from mac80211 and frees the ah->hw as well as all the ar's in it. After this ath12k_core_soc_destroy()-> ath12k_dp_free()-> ath12k_dp_cc_cleanup() tries to access one of the freed ar's from pending skb. This is because during mac destroy, driver failed to flush few data packets, which were accessed later in ath12k_dp_cc_cleanup() and freed, but using ar from the packet led to this use-after-free. BUG: KASAN: use-after-free in ath12k_dp_cc_cleanup.part.0+0x5e2/0xd40 [ath12k] Write of size 4 at addr ffff888150bd3514 by task modprobe/8926 CPU: 0 UID: 0 PID: 8926 Comm: modprobe Not tainted 6.11.0-rc2-wt-ath+ #1746 Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS HNKBLi70.86A.0067.2021.0528.1339 05/28/2021 Call Trace: <TASK> dump_stack_lvl+0x7d/0xe0 print_address_description.constprop.0+0x33/0x3a0 print_report+0xb5/0x260 ? kasan_addr_to_slab+0x24/0x80 kasan_report+0xd8/0x110 ? ath12k_dp_cc_cleanup.part.0+0x5e2/0xd40 [ath12k] ? ath12k_dp_cc_cleanup.part.0+0x5e2/0xd40 [ath12k] kasan_check_range+0xf3/0x1a0 __kasan_check_write+0x14/0x20 ath12k_dp_cc_cleanup.part.0+0x5e2/0xd40 [ath12k] ath12k_dp_free+0x178/0x420 [ath12k] ath12k_core_stop+0x176/0x200 [ath12k] ath12k_core_deinit+0x13f/0x210 [ath12k] ath12k_pci_remove+0xad/0x1c0 [ath12k] pci_device_remove+0x9b/0x1b0 device_remove+0xbf/0x150 device_release_driver_internal+0x3c3/0x580 ? __kasan_check_read+0x11/0x20 driver_detach+0xc4/0x190 bus_remove_driver+0x130/0x2a0 driver_unregister+0x68/0x90 pci_unregister_driver+0x24/0x240 ? find_module_all+0x13e/0x1e0 ath12k_pci_exit+0x10/0x20 [ath12k] __do_sys_delete_module+0x32c/0x580 ? module_flags+0x2f0/0x2f0 ? kmem_cache_free+0xf0/0x410 ? __fput+0x56f/0xab0 ? __fput+0x56f/0xab0 ? debug_smp_processor_id+0x17/0x20 __x64_sys_delete_module+0x4f/0x70 x64_sys_call+0x522/0x9f0 do_syscall_64+0x64/0x130 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f8182c6ac8b Commit 24de1b7b231c ("wifi: ath12k: fix flush failure in recovery scenarios") added the change to decrement the pending packets count in case of recovery which make sense as ah->hw as well all ar's in it are intact during recovery, but during core deinit there is no use in decrementing packets count or waking up the empty waitq as the module is going to be removed also ar's from pending skb's can't be used and the packets should just be released back. To fix this, avoid accessing ar from skb->cb when driver is being unregistered. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00214-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

In the Linux kernel, the following vulnerability has been resolved: hfsplus: don't query the device logical block size multiple times Devices block sizes may change. One of these cases is a loop device by using ioctl LOOP_SET_BLOCK_SIZE. While this may cause other issues like IO being rejected, in the case of hfsplus, it will allocate a block by using that size and potentially write out-of-bounds when hfsplus_read_wrapper calls hfsplus_submit_bio and the latter function reads a different io_size. Using a new min_io_size initally set to sb_min_blocksize works for the purposes of the original fix, since it will be set to the max between HFSPLUS_SECTOR_SIZE and the first seen logical block size. We still use the max between HFSPLUS_SECTOR_SIZE and min_io_size in case the latter is not initialized. Tested by mounting an hfsplus filesystem with loop block sizes 512, 1024 and 4096. The produced KASAN report before the fix looks like this: [ 419.944641] ================================================================== [ 419.945655] BUG: KASAN: slab-use-after-free in hfsplus_read_wrapper+0x659/0xa0a [ 419.946703] Read of size 2 at addr ffff88800721fc00 by task repro/10678 [ 419.947612] [ 419.947846] CPU: 0 UID: 0 PID: 10678 Comm: repro Not tainted 6.12.0-rc5-00008-gdf56e0f2f3ca #84 [ 419.949007] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 [ 419.950035] Call Trace: [ 419.950384] <TASK> [ 419.950676] dump_stack_lvl+0x57/0x78 [ 419.951212] ? hfsplus_read_wrapper+0x659/0xa0a [ 419.951830] print_report+0x14c/0x49e [ 419.952361] ? __virt_addr_valid+0x267/0x278 [ 419.952979] ? kmem_cache_debug_flags+0xc/0x1d [ 419.953561] ? hfsplus_read_wrapper+0x659/0xa0a [ 419.954231] kasan_report+0x89/0xb0 [ 419.954748] ? hfsplus_read_wrapper+0x659/0xa0a [ 419.955367] hfsplus_read_wrapper+0x659/0xa0a [ 419.955948] ? __pfx_hfsplus_read_wrapper+0x10/0x10 [ 419.956618] ? do_raw_spin_unlock+0x59/0x1a9 [ 419.957214] ? _raw_spin_unlock+0x1a/0x2e [ 419.957772] hfsplus_fill_super+0x348/0x1590 [ 419.958355] ? hlock_class+0x4c/0x109 [ 419.958867] ? __pfx_hfsplus_fill_super+0x10/0x10 [ 419.959499] ? __pfx_string+0x10/0x10 [ 419.960006] ? lock_acquire+0x3e2/0x454 [ 419.960532] ? bdev_name.constprop.0+0xce/0x243 [ 419.961129] ? __pfx_bdev_name.constprop.0+0x10/0x10 [ 419.961799] ? pointer+0x3f0/0x62f [ 419.962277] ? __pfx_pointer+0x10/0x10 [ 419.962761] ? vsnprintf+0x6c4/0xfba [ 419.963178] ? __pfx_vsnprintf+0x10/0x10 [ 419.963621] ? setup_bdev_super+0x376/0x3b3 [ 419.964029] ? snprintf+0x9d/0xd2 [ 419.964344] ? __pfx_snprintf+0x10/0x10 [ 419.964675] ? lock_acquired+0x45c/0x5e9 [ 419.965016] ? set_blocksize+0x139/0x1c1 [ 419.965381] ? sb_set_blocksize+0x6d/0xae [ 419.965742] ? __pfx_hfsplus_fill_super+0x10/0x10 [ 419.966179] mount_bdev+0x12f/0x1bf [ 419.966512] ? __pfx_mount_bdev+0x10/0x10 [ 419.966886] ? vfs_parse_fs_string+0xce/0x111 [ 419.967293] ? __pfx_vfs_parse_fs_string+0x10/0x10 [ 419.967702] ? __pfx_hfsplus_mount+0x10/0x10 [ 419.968073] legacy_get_tree+0x104/0x178 [ 419.968414] vfs_get_tree+0x86/0x296 [ 419.968751] path_mount+0xba3/0xd0b [ 419.969157] ? __pfx_path_mount+0x10/0x10 [ 419.969594] ? kmem_cache_free+0x1e2/0x260 [ 419.970311] do_mount+0x99/0xe0 [ 419.970630] ? __pfx_do_mount+0x10/0x10 [ 419.971008] __do_sys_mount+0x199/0x1c9 [ 419.971397] do_syscall_64+0xd0/0x135 [ 419.971761] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 419.972233] RIP: 0033:0x7c3cb812972e [ 419.972564] Code: 48 8b 0d f5 46 0d 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d c2 46 0d 00 f7 d8 64 89 01 48 [ 419.974371] RSP: 002b:00007ffe30632548 EFLAGS: 00000286 ORIG_RAX: 00000000000000a5 [ 419.975048] RAX: ffffffffffffffda RBX: 00007ffe306328d8 RCX: 00007c3cb812972e [ 419.975701] RDX: 0000000020000000 RSI: 0000000020000c80 RDI: ---truncated---

In the Linux kernel, the following vulnerability has been resolved: tcp_bpf: Fix the sk_mem_uncharge logic in tcp_bpf_sendmsg The current sk memory accounting logic in __SK_REDIRECT is pre-uncharging tosend bytes, which is either msg->sg.size or a smaller value apply_bytes. Potential problems with this strategy are as follows: - If the actual sent bytes are smaller than tosend, we need to charge some bytes back, as in line 487, which is okay but seems not clean. - When tosend is set to apply_bytes, as in line 417, and (ret < 0), we may miss uncharging (msg->sg.size - apply_bytes) bytes. [...] 415 tosend = msg->sg.size; 416 if (psock->apply_bytes && psock->apply_bytes < tosend) 417 tosend = psock->apply_bytes; [...] 443 sk_msg_return(sk, msg, tosend); 444 release_sock(sk); 446 origsize = msg->sg.size; 447 ret = tcp_bpf_sendmsg_redir(sk_redir, redir_ingress, 448 msg, tosend, flags); 449 sent = origsize - msg->sg.size; [...] 454 lock_sock(sk); 455 if (unlikely(ret < 0)) { 456 int free = sk_msg_free_nocharge(sk, msg); 458 if (!cork) 459 *copied -= free; 460 } [...] 487 if (eval == __SK_REDIRECT) 488 sk_mem_charge(sk, tosend - sent); [...] When running the selftest test_txmsg_redir_wait_sndmem with txmsg_apply, the following warning will be reported: ------------[ cut here ]------------ WARNING: CPU: 6 PID: 57 at net/ipv4/af_inet.c:156 inet_sock_destruct+0x190/0x1a0 Modules linked in: CPU: 6 UID: 0 PID: 57 Comm: kworker/6:0 Not tainted 6.12.0-rc1.bm.1-amd64+ #43 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 Workqueue: events sk_psock_destroy RIP: 0010:inet_sock_destruct+0x190/0x1a0 RSP: 0018:ffffad0a8021fe08 EFLAGS: 00010206 RAX: 0000000000000011 RBX: ffff9aab4475b900 RCX: ffff9aab481a0800 RDX: 0000000000000303 RSI: 0000000000000011 RDI: ffff9aab4475b900 RBP: ffff9aab4475b990 R08: 0000000000000000 R09: ffff9aab40050ec0 R10: 0000000000000000 R11: ffff9aae6fdb1d01 R12: ffff9aab49c60400 R13: ffff9aab49c60598 R14: ffff9aab49c60598 R15: dead000000000100 FS: 0000000000000000(0000) GS:ffff9aae6fd80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffec7e47bd8 CR3: 00000001a1a1c004 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ? __warn+0x89/0x130 ? inet_sock_destruct+0x190/0x1a0 ? report_bug+0xfc/0x1e0 ? handle_bug+0x5c/0xa0 ? exc_invalid_op+0x17/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? inet_sock_destruct+0x190/0x1a0 __sk_destruct+0x25/0x220 sk_psock_destroy+0x2b2/0x310 process_scheduled_works+0xa3/0x3e0 worker_thread+0x117/0x240 ? __pfx_worker_thread+0x10/0x10 kthread+0xcf/0x100 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x31/0x40 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> ---[ end trace 0000000000000000 ]--- In __SK_REDIRECT, a more concise way is delaying the uncharging after sent bytes are finalized, and uncharge this value. When (ret < 0), we shall invoke sk_msg_free. Same thing happens in case __SK_DROP, when tosend is set to apply_bytes, we may miss uncharging (msg->sg.size - apply_bytes) bytes. The same warning will be reported in selftest. [...] 468 case __SK_DROP: 469 default: 470 sk_msg_free_partial(sk, msg, tosend); 471 sk_msg_apply_bytes(psock, tosend); 472 *copied -= (tosend + delta); 473 return -EACCES; [...] So instead of sk_msg_free_partial we can do sk_msg_free here.

In the Linux kernel, the following vulnerability has been resolved: sched/core: Fix use-after-free bug in dup_user_cpus_ptr() Since commit 07ec77a1d4e8 ("sched: Allow task CPU affinity to be restricted on asymmetric systems"), the setting and clearing of user_cpus_ptr are done under pi_lock for arm64 architecture. However, dup_user_cpus_ptr() accesses user_cpus_ptr without any lock protection. Since sched_setaffinity() can be invoked from another process, the process being modified may be undergoing fork() at the same time. When racing with the clearing of user_cpus_ptr in __set_cpus_allowed_ptr_locked(), it can lead to user-after-free and possibly double-free in arm64 kernel. Commit 8f9ea86fdf99 ("sched: Always preserve the user requested cpumask") fixes this problem as user_cpus_ptr, once set, will never be cleared in a task's lifetime. However, this bug was re-introduced in commit 851a723e45d1 ("sched: Always clear user_cpus_ptr in do_set_cpus_allowed()") which allows the clearing of user_cpus_ptr in do_set_cpus_allowed(). This time, it will affect all arches. Fix this bug by always clearing the user_cpus_ptr of the newly cloned/forked task before the copying process starts and check the user_cpus_ptr state of the source task under pi_lock. Note to stable, this patch won't be applicable to stable releases. Just copy the new dup_user_cpus_ptr() function over.

In the Linux kernel, the following vulnerability has been resolved: ovl: Filter invalid inodes with missing lookup function Add a check to the ovl_dentry_weird() function to prevent the processing of directory inodes that lack the lookup function. This is important because such inodes can cause errors in overlayfs when passed to the lowerstack.

In the Linux kernel, the following vulnerability has been resolved: PCI: endpoint: Fix PCI domain ID release in pci_epc_destroy() pci_epc_destroy() invokes pci_bus_release_domain_nr() to release the PCI domain ID, but there are two issues: - 'epc->dev' is passed to pci_bus_release_domain_nr() which was already freed by device_unregister(), leading to a use-after-free issue. - Domain ID corresponds to the EPC device parent, so passing 'epc->dev' is also wrong. Fix these issues by passing 'epc->dev.parent' to pci_bus_release_domain_nr() and also do it before device_unregister(). [mani: reworded subject and description]

In the Linux kernel, the following vulnerability has been resolved: af_packet: avoid erroring out after sock_init_data() in packet_create() After sock_init_data() the allocated sk object is attached to the provided sock object. On error, packet_create() frees the sk object leaving the dangling pointer in the sock object on return. Some other code may try to use this pointer and cause use-after-free.

In the Linux kernel, the following vulnerability has been resolved: drm: zynqmp_kms: Unplug DRM device before removal Prevent userspace accesses to the DRM device from causing use-after-frees by unplugging the device before we remove it. This causes any further userspace accesses to result in an error without further calls into this driver's internals.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: avoid leaving dangling sk pointer in rfcomm_sock_alloc() bt_sock_alloc() attaches allocated sk object to the provided sock object. If rfcomm_dlc_alloc() fails, we release the sk object, but leave the dangling pointer in the sock object, which may cause use-after-free. Fix this by swapping calls to bt_sock_alloc() and rfcomm_dlc_alloc().

In the Linux kernel, the following vulnerability has been resolved: EDAC/igen6: Avoid segmentation fault on module unload The segmentation fault happens because: During modprobe: 1. In igen6_probe(), igen6_pvt will be allocated with kzalloc() 2. In igen6_register_mci(), mci->pvt_info will point to &igen6_pvt->imc[mc] During rmmod: 1. In mci_release() in edac_mc.c, it will kfree(mci->pvt_info) 2. In igen6_remove(), it will kfree(igen6_pvt); Fix this issue by setting mci->pvt_info to NULL to avoid the double kfree.

In the Linux kernel, the following vulnerability has been resolved: binder: fix node UAF in binder_add_freeze_work() In binder_add_freeze_work() we iterate over the proc->nodes with the proc->inner_lock held. However, this lock is temporarily dropped in order to acquire the node->lock first (lock nesting order). This can race with binder_node_release() and trigger a use-after-free: ================================================================== BUG: KASAN: slab-use-after-free in _raw_spin_lock+0xe4/0x19c Write of size 4 at addr ffff53c04c29dd04 by task freeze/640 CPU: 5 UID: 0 PID: 640 Comm: freeze Not tainted 6.11.0-07343-ga727812a8d45 #17 Hardware name: linux,dummy-virt (DT) Call trace: _raw_spin_lock+0xe4/0x19c binder_add_freeze_work+0x148/0x478 binder_ioctl+0x1e70/0x25ac __arm64_sys_ioctl+0x124/0x190 Allocated by task 637: __kmalloc_cache_noprof+0x12c/0x27c binder_new_node+0x50/0x700 binder_transaction+0x35ac/0x6f74 binder_thread_write+0xfb8/0x42a0 binder_ioctl+0x18f0/0x25ac __arm64_sys_ioctl+0x124/0x190 Freed by task 637: kfree+0xf0/0x330 binder_thread_read+0x1e88/0x3a68 binder_ioctl+0x16d8/0x25ac __arm64_sys_ioctl+0x124/0x190 ================================================================== Fix the race by taking a temporary reference on the node before releasing the proc->inner lock. This ensures the node remains alive while in use.

In the Linux kernel, the following vulnerability has been resolved: mtd: rawnand: fix double free in atmel_pmecc_create_user() The "user" pointer was converted from being allocated with kzalloc() to being allocated by devm_kzalloc(). Calling kfree(user) will lead to a double free.

In the Linux kernel, the following vulnerability has been resolved: brd: defer automatic disk creation until module initialization succeeds My colleague Wupeng found the following problems during fault injection: BUG: unable to handle page fault for address: fffffbfff809d073 PGD 6e648067 P4D 123ec8067 PUD 123ec4067 PMD 100e38067 PTE 0 Oops: Oops: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 5 UID: 0 PID: 755 Comm: modprobe Not tainted 6.12.0-rc3+ #17 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014 RIP: 0010:__asan_load8+0x4c/0xa0 ... Call Trace: <TASK> blkdev_put_whole+0x41/0x70 bdev_release+0x1a3/0x250 blkdev_release+0x11/0x20 __fput+0x1d7/0x4a0 task_work_run+0xfc/0x180 syscall_exit_to_user_mode+0x1de/0x1f0 do_syscall_64+0x6b/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e loop_init() is calling loop_add() after __register_blkdev() succeeds and is ignoring disk_add() failure from loop_add(), for loop_add() failure is not fatal and successfully created disks are already visible to bdev_open(). brd_init() is currently calling brd_alloc() before __register_blkdev() succeeds and is releasing successfully created disks when brd_init() returns an error. This can cause UAF for the latter two case: case 1: T1: modprobe brd brd_init brd_alloc(0) // success add_disk disk_scan_partitions bdev_file_open_by_dev // alloc file fput // won't free until back to userspace brd_alloc(1) // failed since mem alloc error inject // error path for modprobe will release code segment // back to userspace __fput blkdev_release bdev_release blkdev_put_whole bdev->bd_disk->fops->release // fops is freed now, UAF! case 2: T1: T2: modprobe brd brd_init brd_alloc(0) // success open(/dev/ram0) brd_alloc(1) // fail // error path for modprobe close(/dev/ram0) ... /* UAF! */ bdev->bd_disk->fops->release Fix this problem by following what loop_init() does. Besides, reintroduce brd_devices_mutex to help serialize modifications to brd_list.

In the Linux kernel, the following vulnerability has been resolved: blk-cgroup: Fix UAF in blkcg_unpin_online() blkcg_unpin_online() walks up the blkcg hierarchy putting the online pin. To walk up, it uses blkcg_parent(blkcg) but it was calling that after blkcg_destroy_blkgs(blkcg) which could free the blkcg, leading to the following UAF: ================================================================== BUG: KASAN: slab-use-after-free in blkcg_unpin_online+0x15a/0x270 Read of size 8 at addr ffff8881057678c0 by task kworker/9:1/117 CPU: 9 UID: 0 PID: 117 Comm: kworker/9:1 Not tainted 6.13.0-rc1-work-00182-gb8f52214c61a-dirty #48 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS unknown 02/02/2022 Workqueue: cgwb_release cgwb_release_workfn Call Trace: <TASK> dump_stack_lvl+0x27/0x80 print_report+0x151/0x710 kasan_report+0xc0/0x100 blkcg_unpin_online+0x15a/0x270 cgwb_release_workfn+0x194/0x480 process_scheduled_works+0x71b/0xe20 worker_thread+0x82a/0xbd0 kthread+0x242/0x2c0 ret_from_fork+0x33/0x70 ret_from_fork_asm+0x1a/0x30 </TASK> ... Freed by task 1944: kasan_save_track+0x2b/0x70 kasan_save_free_info+0x3c/0x50 __kasan_slab_free+0x33/0x50 kfree+0x10c/0x330 css_free_rwork_fn+0xe6/0xb30 process_scheduled_works+0x71b/0xe20 worker_thread+0x82a/0xbd0 kthread+0x242/0x2c0 ret_from_fork+0x33/0x70 ret_from_fork_asm+0x1a/0x30 Note that the UAF is not easy to trigger as the free path is indirected behind a couple RCU grace periods and a work item execution. I could only trigger it with artifical msleep() injected in blkcg_unpin_online(). Fix it by reading the parent pointer before destroying the blkcg's blkg's.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix out-of-bounds access in 'dcn21_link_encoder_create' An issue was identified in the dcn21_link_encoder_create function where an out-of-bounds access could occur when the hpd_source index was used to reference the link_enc_hpd_regs array. This array has a fixed size and the index was not being checked against the array's bounds before accessing it. This fix adds a conditional check to ensure that the hpd_source index is within the valid range of the link_enc_hpd_regs array. If the index is out of bounds, the function now returns NULL to prevent undefined behavior. References: [ 65.920507] ------------[ cut here ]------------ [ 65.920510] UBSAN: array-index-out-of-bounds in drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn21/dcn21_resource.c:1312:29 [ 65.920519] index 7 is out of range for type 'dcn10_link_enc_hpd_registers [5]' [ 65.920523] CPU: 3 PID: 1178 Comm: modprobe Tainted: G OE 6.8.0-cleanershaderfeatureresetasdntipmi200nv2132 #13 [ 65.920525] Hardware name: AMD Majolica-RN/Majolica-RN, BIOS WMJ0429N_Weekly_20_04_2 04/29/2020 [ 65.920527] Call Trace: [ 65.920529] <TASK> [ 65.920532] dump_stack_lvl+0x48/0x70 [ 65.920541] dump_stack+0x10/0x20 [ 65.920543] __ubsan_handle_out_of_bounds+0xa2/0xe0 [ 65.920549] dcn21_link_encoder_create+0xd9/0x140 [amdgpu] [ 65.921009] link_create+0x6d3/0xed0 [amdgpu] [ 65.921355] create_links+0x18a/0x4e0 [amdgpu] [ 65.921679] dc_create+0x360/0x720 [amdgpu] [ 65.921999] ? dmi_matches+0xa0/0x220 [ 65.922004] amdgpu_dm_init+0x2b6/0x2c90 [amdgpu] [ 65.922342] ? console_unlock+0x77/0x120 [ 65.922348] ? dev_printk_emit+0x86/0xb0 [ 65.922354] dm_hw_init+0x15/0x40 [amdgpu] [ 65.922686] amdgpu_device_init+0x26a8/0x33a0 [amdgpu] [ 65.922921] amdgpu_driver_load_kms+0x1b/0xa0 [amdgpu] [ 65.923087] amdgpu_pci_probe+0x1b7/0x630 [amdgpu] [ 65.923087] local_pci_probe+0x4b/0xb0 [ 65.923087] pci_device_probe+0xc8/0x280 [ 65.923087] really_probe+0x187/0x300 [ 65.923087] __driver_probe_device+0x85/0x130 [ 65.923087] driver_probe_device+0x24/0x110 [ 65.923087] __driver_attach+0xac/0x1d0 [ 65.923087] ? __pfx___driver_attach+0x10/0x10 [ 65.923087] bus_for_each_dev+0x7d/0xd0 [ 65.923087] driver_attach+0x1e/0x30 [ 65.923087] bus_add_driver+0xf2/0x200 [ 65.923087] driver_register+0x64/0x130 [ 65.923087] ? __pfx_amdgpu_init+0x10/0x10 [amdgpu] [ 65.923087] __pci_register_driver+0x61/0x70 [ 65.923087] amdgpu_init+0x7d/0xff0 [amdgpu] [ 65.923087] do_one_initcall+0x49/0x310 [ 65.923087] ? kmalloc_trace+0x136/0x360 [ 65.923087] do_init_module+0x6a/0x270 [ 65.923087] load_module+0x1fce/0x23a0 [ 65.923087] init_module_from_file+0x9c/0xe0 [ 65.923087] ? init_module_from_file+0x9c/0xe0 [ 65.923087] idempotent_init_module+0x179/0x230 [ 65.923087] __x64_sys_finit_module+0x5d/0xa0 [ 65.923087] do_syscall_64+0x76/0x120 [ 65.923087] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 65.923087] RIP: 0033:0x7f2d80f1e88d [ 65.923087] Code: 5b 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 73 b5 0f 00 f7 d8 64 89 01 48 [ 65.923087] RSP: 002b:00007ffc7bc1aa78 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 65.923087] RAX: ffffffffffffffda RBX: 0000564c9c1db130 RCX: 00007f2d80f1e88d [ 65.923087] RDX: 0000000000000000 RSI: 0000564c9c1e5480 RDI: 000000000000000f [ 65.923087] RBP: 0000000000040000 R08: 0000000000000000 R09: 0000000000000002 [ 65.923087] R10: 000000000000000f R11: 0000000000000246 R12: 0000564c9c1e5480 [ 65.923087] R13: 0000564c9c1db260 R14: 0000000000000000 R15: 0000564c9c1e54b0 [ 65.923087] </TASK> [ 65.923927] ---[ end trace ]---

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free in durable v2 replay of active file handles parse_durable_handle_context() unconditionally assigns dh_info->fp->conn to the current connection when handling a DURABLE_REQ_V2 context with SMB2_FLAGS_REPLAY_OPERATION. ksmbd_lookup_fd_cguid() does not filter by fp->conn, so it returns file handles that are already actively connected. The unconditional overwrite replaces fp->conn, and when the overwriting connection is subsequently freed, __ksmbd_close_fd() dereferences the stale fp->conn via spin_lock(&fp->conn->llist_lock), causing a use-after-free. KASAN report: [ 7.349357] ================================================================== [ 7.349607] BUG: KASAN: slab-use-after-free in _raw_spin_lock+0x75/0xe0 [ 7.349811] Write of size 4 at addr ffff8881056ac18c by task kworker/1:2/108 [ 7.350010] [ 7.350064] CPU: 1 UID: 0 PID: 108 Comm: kworker/1:2 Not tainted 7.0.0-rc3+ #58 PREEMPTLAZY [ 7.350068] Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 7.350070] Workqueue: ksmbd-io handle_ksmbd_work [ 7.350083] Call Trace: [ 7.350087] <TASK> [ 7.350087] dump_stack_lvl+0x64/0x80 [ 7.350094] print_report+0xce/0x660 [ 7.350100] ? __pfx__raw_spin_lock_irqsave+0x10/0x10 [ 7.350101] ? __pfx___mod_timer+0x10/0x10 [ 7.350106] ? _raw_spin_lock+0x75/0xe0 [ 7.350108] kasan_report+0xce/0x100 [ 7.350109] ? _raw_spin_lock+0x75/0xe0 [ 7.350114] kasan_check_range+0x105/0x1b0 [ 7.350116] _raw_spin_lock+0x75/0xe0 [ 7.350118] ? __pfx__raw_spin_lock+0x10/0x10 [ 7.350119] ? __call_rcu_common.constprop.0+0x25e/0x780 [ 7.350125] ? close_id_del_oplock+0x2cc/0x4e0 [ 7.350128] __ksmbd_close_fd+0x27f/0xaf0 [ 7.350131] ksmbd_close_fd+0x135/0x1b0 [ 7.350133] smb2_close+0xb19/0x15b0 [ 7.350142] ? __pfx_smb2_close+0x10/0x10 [ 7.350143] ? xas_load+0x18/0x270 [ 7.350146] ? _raw_spin_lock+0x84/0xe0 [ 7.350148] ? __pfx__raw_spin_lock+0x10/0x10 [ 7.350150] ? _raw_spin_unlock+0xe/0x30 [ 7.350151] ? ksmbd_smb2_check_message+0xeb2/0x24c0 [ 7.350153] ? ksmbd_tree_conn_lookup+0xcd/0xf0 [ 7.350154] handle_ksmbd_work+0x40f/0x1080 [ 7.350156] process_one_work+0x5fa/0xef0 [ 7.350162] ? assign_work+0x122/0x3e0 [ 7.350163] worker_thread+0x54b/0xf70 [ 7.350165] ? __pfx_worker_thread+0x10/0x10 [ 7.350166] kthread+0x346/0x470 [ 7.350170] ? recalc_sigpending+0x19b/0x230 [ 7.350176] ? __pfx_kthread+0x10/0x10 [ 7.350178] ret_from_fork+0x4fb/0x6c0 [ 7.350183] ? __pfx_ret_from_fork+0x10/0x10 [ 7.350185] ? __switch_to+0x36c/0xbe0 [ 7.350188] ? __pfx_kthread+0x10/0x10 [ 7.350190] ret_from_fork_asm+0x1a/0x30 [ 7.350197] </TASK> [ 7.350197] [ 7.355160] Allocated by task 123: [ 7.355261] kasan_save_stack+0x33/0x60 [ 7.355373] kasan_save_track+0x14/0x30 [ 7.355484] __kasan_kmalloc+0x8f/0xa0 [ 7.355593] ksmbd_conn_alloc+0x44/0x6d0 [ 7.355711] ksmbd_kthread_fn+0x243/0xd70 [ 7.355839] kthread+0x346/0x470 [ 7.355942] ret_from_fork+0x4fb/0x6c0 [ 7.356051] ret_from_fork_asm+0x1a/0x30 [ 7.356164] [ 7.356214] Freed by task 134: [ 7.356305] kasan_save_stack+0x33/0x60 [ 7.356416] kasan_save_track+0x14/0x30 [ 7.356527] kasan_save_free_info+0x3b/0x60 [ 7.356646] __kasan_slab_free+0x43/0x70 [ 7.356761] kfree+0x1ca/0x430 [ 7.356862] ksmbd_tcp_disconnect+0x59/0xe0 [ 7.356993] ksmbd_conn_handler_loop+0x77e/0xd40 [ 7.357138] kthread+0x346/0x470 [ 7.357240] ret_from_fork+0x4fb/0x6c0 [ 7.357350] ret_from_fork_asm+0x1a/0x30 [ 7.357463] [ 7.357513] The buggy address belongs to the object at ffff8881056ac000 [ 7.357513] which belongs to the cache kmalloc-1k of size 1024 [ 7.357857] The buggy address is located 396 bytes inside of [ 7.357857] freed 1024-byte region ---truncated---

In the Linux kernel, the following vulnerability has been resolved: scsi: sg: Fix slab-use-after-free read in sg_release() Fix a use-after-free bug in sg_release(), detected by syzbot with KASAN: BUG: KASAN: slab-use-after-free in lock_release+0x151/0xa30 kernel/locking/lockdep.c:5838 __mutex_unlock_slowpath+0xe2/0x750 kernel/locking/mutex.c:912 sg_release+0x1f4/0x2e0 drivers/scsi/sg.c:407 In sg_release(), the function kref_put(&sfp->f_ref, sg_remove_sfp) is called before releasing the open_rel_lock mutex. The kref_put() call may decrement the reference count of sfp to zero, triggering its cleanup through sg_remove_sfp(). This cleanup includes scheduling deferred work via sg_remove_sfp_usercontext(), which ultimately frees sfp. After kref_put(), sg_release() continues to unlock open_rel_lock and may reference sfp or sdp. If sfp has already been freed, this results in a slab-use-after-free error. Move the kref_put(&sfp->f_ref, sg_remove_sfp) call after unlocking the open_rel_lock mutex. This ensures: - No references to sfp or sdp occur after the reference count is decremented. - Cleanup functions such as sg_remove_sfp() and sg_remove_sfp_usercontext() can safely execute without impacting the mutex handling in sg_release(). The fix has been tested and validated by syzbot. This patch closes the bug reported at the following syzkaller link and ensures proper sequencing of resource cleanup and mutex operations, eliminating the risk of use-after-free errors in sg_release().

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: use ieee80211_purge_tx_queue() to purge TX skb When removing kernel modules by: rmmod rtw88_8723cs rtw88_8703b rtw88_8723x rtw88_sdio rtw88_core Driver uses skb_queue_purge() to purge TX skb, but not report tx status causing "Have pending ack frames!" warning. Use ieee80211_purge_tx_queue() to correct this. Since ieee80211_purge_tx_queue() doesn't take locks, to prevent racing between TX work and purge TX queue, flush and destroy TX work in advance. wlan0: deauthenticating from aa:f5:fd:60:4c:a8 by local choice (Reason: 3=DEAUTH_LEAVING) ------------[ cut here ]------------ Have pending ack frames! WARNING: CPU: 3 PID: 9232 at net/mac80211/main.c:1691 ieee80211_free_ack_frame+0x5c/0x90 [mac80211] CPU: 3 PID: 9232 Comm: rmmod Tainted: G C 6.10.1-200.fc40.aarch64 #1 Hardware name: pine64 Pine64 PinePhone Braveheart (1.1)/Pine64 PinePhone Braveheart (1.1), BIOS 2024.01 01/01/2024 pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : ieee80211_free_ack_frame+0x5c/0x90 [mac80211] lr : ieee80211_free_ack_frame+0x5c/0x90 [mac80211] sp : ffff80008c1b37b0 x29: ffff80008c1b37b0 x28: ffff000003be8000 x27: 0000000000000000 x26: 0000000000000000 x25: ffff000003dc14b8 x24: ffff80008c1b37d0 x23: ffff000000ff9f80 x22: 0000000000000000 x21: 000000007fffffff x20: ffff80007c7e93d8 x19: ffff00006e66f400 x18: 0000000000000000 x17: ffff7ffffd2b3000 x16: ffff800083fc0000 x15: 0000000000000000 x14: 0000000000000000 x13: 2173656d61726620 x12: 6b636120676e6964 x11: 0000000000000000 x10: 000000000000005d x9 : ffff8000802af2b0 x8 : ffff80008c1b3430 x7 : 0000000000000001 x6 : 0000000000000001 x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000003be8000 Call trace: ieee80211_free_ack_frame+0x5c/0x90 [mac80211] idr_for_each+0x74/0x110 ieee80211_free_hw+0x44/0xe8 [mac80211] rtw_sdio_remove+0x9c/0xc0 [rtw88_sdio] sdio_bus_remove+0x44/0x180 device_remove+0x54/0x90 device_release_driver_internal+0x1d4/0x238 driver_detach+0x54/0xc0 bus_remove_driver+0x78/0x108 driver_unregister+0x38/0x78 sdio_unregister_driver+0x2c/0x40 rtw_8723cs_driver_exit+0x18/0x1000 [rtw88_8723cs] __do_sys_delete_module.isra.0+0x190/0x338 __arm64_sys_delete_module+0x1c/0x30 invoke_syscall+0x74/0x100 el0_svc_common.constprop.0+0x48/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x3c/0x158 el0t_64_sync_handler+0x120/0x138 el0t_64_sync+0x194/0x198 ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: s390/pci: Fix potential double remove of hotplug slot In commit 6ee600bfbe0f ("s390/pci: remove hotplug slot when releasing the device") the zpci_exit_slot() was moved from zpci_device_reserved() to zpci_release_device() with the intention of keeping the hotplug slot around until the device is actually removed. Now zpci_release_device() is only called once all references are dropped. Since the zPCI subsystem only drops its reference once the device is in the reserved state it follows that zpci_release_device() must only deal with devices in the reserved state. Despite that it contains code to tear down from both configured and standby state. For the standby case this already includes the removal of the hotplug slot so would cause a double removal if a device was ever removed in either configured or standby state. Instead of causing a potential double removal in a case that should never happen explicitly WARN_ON() if a device in non-reserved state is released and get rid of the dead code cases.

In the Linux kernel, the following vulnerability has been resolved: kunit: string-stream: Fix a UAF bug in kunit_init_suite() In kunit_debugfs_create_suite(), if alloc_string_stream() fails in the kunit_suite_for_each_test_case() loop, the "suite->log = stream" has assigned before, and the error path only free the suite->log's stream memory but not set it to NULL, so the later string_stream_clear() of suite->log in kunit_init_suite() will cause below UAF bug. Set stream pointer to NULL after free to fix it. Unable to handle kernel paging request at virtual address 006440150000030d Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [006440150000030d] address between user and kernel address ranges Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: iio_test_gts industrialio_gts_helper cfg80211 rfkill ipv6 [last unloaded: iio_test_gts] CPU: 5 UID: 0 PID: 6253 Comm: modprobe Tainted: G B W N 6.12.0-rc4+ #458 Tainted: [B]=BAD_PAGE, [W]=WARN, [N]=TEST Hardware name: linux,dummy-virt (DT) pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : string_stream_clear+0x54/0x1ac lr : string_stream_clear+0x1a8/0x1ac sp : ffffffc080b47410 x29: ffffffc080b47410 x28: 006440550000030d x27: ffffff80c96b5e98 x26: ffffff80c96b5e80 x25: ffffffe461b3f6c0 x24: 0000000000000003 x23: ffffff80c96b5e88 x22: 1ffffff019cdf4fc x21: dfffffc000000000 x20: ffffff80ce6fa7e0 x19: 032202a80000186d x18: 0000000000001840 x17: 0000000000000000 x16: 0000000000000000 x15: ffffffe45c355cb4 x14: ffffffe45c35589c x13: ffffffe45c03da78 x12: ffffffb810168e75 x11: 1ffffff810168e74 x10: ffffffb810168e74 x9 : dfffffc000000000 x8 : 0000000000000004 x7 : 0000000000000003 x6 : 0000000000000001 x5 : ffffffc080b473a0 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 0000000000000001 x1 : ffffffe462fbf620 x0 : dfffffc000000000 Call trace: string_stream_clear+0x54/0x1ac __kunit_test_suites_init+0x108/0x1d8 kunit_exec_run_tests+0xb8/0x100 kunit_module_notify+0x400/0x55c notifier_call_chain+0xfc/0x3b4 blocking_notifier_call_chain+0x68/0x9c do_init_module+0x24c/0x5c8 load_module+0x4acc/0x4e90 init_module_from_file+0xd4/0x128 idempotent_init_module+0x2d4/0x57c __arm64_sys_finit_module+0xac/0x100 invoke_syscall+0x6c/0x258 el0_svc_common.constprop.0+0x160/0x22c do_el0_svc+0x44/0x5c el0_svc+0x48/0xb8 el0t_64_sync_handler+0x13c/0x158 el0t_64_sync+0x190/0x194 Code: f9400753 d2dff800 f2fbffe0 d343fe7c (38e06b80) ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Oops: Fatal exception

In the Linux kernel, the following vulnerability has been resolved: net: defer final 'struct net' free in netns dismantle Ilya reported a slab-use-after-free in dst_destroy [1] Issue is in xfrm6_net_init() and xfrm4_net_init() : They copy xfrm[46]_dst_ops_template into net->xfrm.xfrm[46]_dst_ops. But net structure might be freed before all the dst callbacks are called. So when dst_destroy() calls later : if (dst->ops->destroy) dst->ops->destroy(dst); dst->ops points to the old net->xfrm.xfrm[46]_dst_ops, which has been freed. See a relevant issue fixed in : ac888d58869b ("net: do not delay dst_entries_add() in dst_release()") A fix is to queue the 'struct net' to be freed after one another cleanup_net() round (and existing rcu_barrier()) [1] BUG: KASAN: slab-use-after-free in dst_destroy (net/core/dst.c:112) Read of size 8 at addr ffff8882137ccab0 by task swapper/37/0 Dec 03 05:46:18 kernel: CPU: 37 UID: 0 PID: 0 Comm: swapper/37 Kdump: loaded Not tainted 6.12.0 #67 Hardware name: Red Hat KVM/RHEL, BIOS 1.16.1-1.el9 04/01/2014 Call Trace: <IRQ> dump_stack_lvl (lib/dump_stack.c:124) print_address_description.constprop.0 (mm/kasan/report.c:378) ? dst_destroy (net/core/dst.c:112) print_report (mm/kasan/report.c:489) ? dst_destroy (net/core/dst.c:112) ? kasan_addr_to_slab (mm/kasan/common.c:37) kasan_report (mm/kasan/report.c:603) ? dst_destroy (net/core/dst.c:112) ? rcu_do_batch (kernel/rcu/tree.c:2567) dst_destroy (net/core/dst.c:112) rcu_do_batch (kernel/rcu/tree.c:2567) ? __pfx_rcu_do_batch (kernel/rcu/tree.c:2491) ? lockdep_hardirqs_on_prepare (kernel/locking/lockdep.c:4339 kernel/locking/lockdep.c:4406) rcu_core (kernel/rcu/tree.c:2825) handle_softirqs (kernel/softirq.c:554) __irq_exit_rcu (kernel/softirq.c:589 kernel/softirq.c:428 kernel/softirq.c:637) irq_exit_rcu (kernel/softirq.c:651) sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1049 arch/x86/kernel/apic/apic.c:1049) </IRQ> <TASK> asm_sysvec_apic_timer_interrupt (./arch/x86/include/asm/idtentry.h:702) RIP: 0010:default_idle (./arch/x86/include/asm/irqflags.h:37 ./arch/x86/include/asm/irqflags.h:92 arch/x86/kernel/process.c:743) Code: 00 4d 29 c8 4c 01 c7 4c 29 c2 e9 6e ff ff ff 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 66 90 0f 00 2d c7 c9 27 00 fb f4 <fa> c3 cc cc cc cc 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 90 RSP: 0018:ffff888100d2fe00 EFLAGS: 00000246 RAX: 00000000001870ed RBX: 1ffff110201a5fc2 RCX: ffffffffb61a3e46 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffffb3d4d123 RBP: 0000000000000000 R08: 0000000000000001 R09: ffffed11c7e1835d R10: ffff888e3f0c1aeb R11: 0000000000000000 R12: 0000000000000000 R13: ffff888100d20000 R14: dffffc0000000000 R15: 0000000000000000 ? ct_kernel_exit.constprop.0 (kernel/context_tracking.c:148) ? cpuidle_idle_call (kernel/sched/idle.c:186) default_idle_call (./include/linux/cpuidle.h:143 kernel/sched/idle.c:118) cpuidle_idle_call (kernel/sched/idle.c:186) ? __pfx_cpuidle_idle_call (kernel/sched/idle.c:168) ? lock_release (kernel/locking/lockdep.c:467 kernel/locking/lockdep.c:5848) ? lockdep_hardirqs_on_prepare (kernel/locking/lockdep.c:4347 kernel/locking/lockdep.c:4406) ? tsc_verify_tsc_adjust (arch/x86/kernel/tsc_sync.c:59) do_idle (kernel/sched/idle.c:326) cpu_startup_entry (kernel/sched/idle.c:423 (discriminator 1)) start_secondary (arch/x86/kernel/smpboot.c:202 arch/x86/kernel/smpboot.c:282) ? __pfx_start_secondary (arch/x86/kernel/smpboot.c:232) ? soft_restart_cpu (arch/x86/kernel/head_64.S:452) common_startup_64 (arch/x86/kernel/head_64.S:414) </TASK> Dec 03 05:46:18 kernel: Allocated by task 12184: kasan_save_stack (mm/kasan/common.c:48) kasan_save_track (./arch/x86/include/asm/current.h:49 mm/kasan/common.c:60 mm/kasan/common.c:69) __kasan_slab_alloc (mm/kasan/common.c:319 mm/kasan/common.c:345) kmem_cache_alloc_noprof (mm/slub.c:4085 mm/slub.c:4134 mm/slub.c:4141) copy_net_ns (net/core/net_namespace.c:421 net/core/net_namespace.c:480) create_new_namespaces ---truncated---

In the Linux kernel, the following vulnerability has been resolved: tipc: Fix use-after-free of kernel socket in cleanup_bearer(). syzkaller reported a use-after-free of UDP kernel socket in cleanup_bearer() without repro. [0][1] When bearer_disable() calls tipc_udp_disable(), cleanup of the UDP kernel socket is deferred by work calling cleanup_bearer(). tipc_exit_net() waits for such works to finish by checking tipc_net(net)->wq_count. However, the work decrements the count too early before releasing the kernel socket, unblocking cleanup_net() and resulting in use-after-free. Let's move the decrement after releasing the socket in cleanup_bearer(). [0]: ref_tracker: net notrefcnt@000000009b3d1faf has 1/1 users at sk_alloc+0x438/0x608 inet_create+0x4c8/0xcb0 __sock_create+0x350/0x6b8 sock_create_kern+0x58/0x78 udp_sock_create4+0x68/0x398 udp_sock_create+0x88/0xc8 tipc_udp_enable+0x5e8/0x848 __tipc_nl_bearer_enable+0x84c/0xed8 tipc_nl_bearer_enable+0x38/0x60 genl_family_rcv_msg_doit+0x170/0x248 genl_rcv_msg+0x400/0x5b0 netlink_rcv_skb+0x1dc/0x398 genl_rcv+0x44/0x68 netlink_unicast+0x678/0x8b0 netlink_sendmsg+0x5e4/0x898 ____sys_sendmsg+0x500/0x830 [1]: BUG: KMSAN: use-after-free in udp_hashslot include/net/udp.h:85 [inline] BUG: KMSAN: use-after-free in udp_lib_unhash+0x3b8/0x930 net/ipv4/udp.c:1979 udp_hashslot include/net/udp.h:85 [inline] udp_lib_unhash+0x3b8/0x930 net/ipv4/udp.c:1979 sk_common_release+0xaf/0x3f0 net/core/sock.c:3820 inet_release+0x1e0/0x260 net/ipv4/af_inet.c:437 inet6_release+0x6f/0xd0 net/ipv6/af_inet6.c:489 __sock_release net/socket.c:658 [inline] sock_release+0xa0/0x210 net/socket.c:686 cleanup_bearer+0x42d/0x4c0 net/tipc/udp_media.c:819 process_one_work kernel/workqueue.c:3229 [inline] process_scheduled_works+0xcaf/0x1c90 kernel/workqueue.c:3310 worker_thread+0xf6c/0x1510 kernel/workqueue.c:3391 kthread+0x531/0x6b0 kernel/kthread.c:389 ret_from_fork+0x60/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:244 Uninit was created at: slab_free_hook mm/slub.c:2269 [inline] slab_free mm/slub.c:4580 [inline] kmem_cache_free+0x207/0xc40 mm/slub.c:4682 net_free net/core/net_namespace.c:454 [inline] cleanup_net+0x16f2/0x19d0 net/core/net_namespace.c:647 process_one_work kernel/workqueue.c:3229 [inline] process_scheduled_works+0xcaf/0x1c90 kernel/workqueue.c:3310 worker_thread+0xf6c/0x1510 kernel/workqueue.c:3391 kthread+0x531/0x6b0 kernel/kthread.c:389 ret_from_fork+0x60/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:244 CPU: 0 UID: 0 PID: 54 Comm: kworker/0:2 Not tainted 6.12.0-rc1-00131-gf66ebf37d69c #7 91723d6f74857f70725e1583cba3cf4adc716cfa Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 Workqueue: events cleanup_bearer

Integer Overflow or Wraparound vulnerability in io_uring of Linux Kernel allows local attacker to cause memory corruption and escalate privileges to root. This issue affects: Linux Kernel versions prior to 5.4.189; version 5.4.24 and later versions.

In the Linux kernel, the following vulnerability has been resolved: 9p/xen: fix release of IRQ Kernel logs indicate an IRQ was double-freed. Pass correct device ID during IRQ release. [Dominique: remove confusing variable reset to 0]

In the Linux kernel, the following vulnerability has been resolved: jfs: fix array-index-out-of-bounds in jfs_readdir The stbl might contain some invalid values. Added a check to return error code in that case.

In the Linux kernel, the following vulnerability has been resolved: net: bridge: mcast: wait for previous gc cycles when removing port syzbot hit a use-after-free[1] which is caused because the bridge doesn't make sure that all previous garbage has been collected when removing a port. What happens is: CPU 1 CPU 2 start gc cycle remove port acquire gc lock first wait for lock call br_multicasg_gc() directly acquire lock now but free port the port can be freed while grp timers still running Make sure all previous gc cycles have finished by using flush_work before freeing the port. [1] BUG: KASAN: slab-use-after-free in br_multicast_port_group_expired+0x4c0/0x550 net/bridge/br_multicast.c:861 Read of size 8 at addr ffff888071d6d000 by task syz.5.1232/9699 CPU: 1 PID: 9699 Comm: syz.5.1232 Not tainted 6.10.0-rc5-syzkaller-00021-g24ca36a562d6 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/07/2024 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:114 print_address_description mm/kasan/report.c:377 [inline] print_report+0xc3/0x620 mm/kasan/report.c:488 kasan_report+0xd9/0x110 mm/kasan/report.c:601 br_multicast_port_group_expired+0x4c0/0x550 net/bridge/br_multicast.c:861 call_timer_fn+0x1a3/0x610 kernel/time/timer.c:1792 expire_timers kernel/time/timer.c:1843 [inline] __run_timers+0x74b/0xaf0 kernel/time/timer.c:2417 __run_timer_base kernel/time/timer.c:2428 [inline] __run_timer_base kernel/time/timer.c:2421 [inline] run_timer_base+0x111/0x190 kernel/time/timer.c:2437

In the Linux kernel, the following vulnerability has been resolved: drm/xe/reg_sr: Remove register pool That pool implementation doesn't really work: if the krealloc happens to move the memory and return another address, the entries in the xarray become invalid, leading to use-after-free later: BUG: KASAN: slab-use-after-free in xe_reg_sr_apply_mmio+0x570/0x760 [xe] Read of size 4 at addr ffff8881244b2590 by task modprobe/2753 Allocated by task 2753: kasan_save_stack+0x39/0x70 kasan_save_track+0x14/0x40 kasan_save_alloc_info+0x37/0x60 __kasan_kmalloc+0xc3/0xd0 __kmalloc_node_track_caller_noprof+0x200/0x6d0 krealloc_noprof+0x229/0x380 Simplify the code to fix the bug. A better pooling strategy may be added back later if needed. (cherry picked from commit e5283bd4dfecbd3335f43b62a68e24dae23f59e4)

In the Linux kernel, the following vulnerability has been resolved: net: af_can: do not leave a dangling sk pointer in can_create() On error can_create() frees the allocated sk object, but sock_init_data() has already attached it to the provided sock object. This will leave a dangling sk pointer in the sock object and may cause use-after-free later.

In the Linux kernel, the following vulnerability has been resolved: nfs/localio: must clear res.replen in nfs_local_read_done Otherwise memory corruption can occur due to NFSv3 LOCALIO reads leaving garbage in res.replen: - nfs3_read_done() copies that into server->read_hdrsize; from there nfs3_proc_read_setup() copies it to args.replen in new requests. - nfs3_xdr_enc_read3args() passes that to rpc_prepare_reply_pages() which includes it in hdrsize for xdr_init_pages, so that rq_rcv_buf contains a ridiculous len. - This is copied to rq_private_buf and xs_read_stream_request() eventually passes the kvec to sock_recvmsg() which receives incoming data into entirely the wrong place. This is easily reproduced with NFSv3 LOCALIO that is servicing reads when it is made to pivot back to using normal RPC. This switch back to using normal NFSv3 with RPC can occur for a few reasons but this issue was exposed with a test that stops and then restarts the NFSv3 server while LOCALIO is performing heavy read IO.

In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix potential out-of-bounds memory access in nilfs_find_entry() Syzbot reported that when searching for records in a directory where the inode's i_size is corrupted and has a large value, memory access outside the folio/page range may occur, or a use-after-free bug may be detected if KASAN is enabled. This is because nilfs_last_byte(), which is called by nilfs_find_entry() and others to calculate the number of valid bytes of directory data in a page from i_size and the page index, loses the upper 32 bits of the 64-bit size information due to an inappropriate type of local variable to which the i_size value is assigned. This caused a large byte offset value due to underflow in the end address calculation in the calling nilfs_find_entry(), resulting in memory access that exceeds the folio/page size. Fix this issue by changing the type of the local variable causing the bit loss from "unsigned int" to "u64". The return value of nilfs_last_byte() is also of type "unsigned int", but it is truncated so as not to exceed PAGE_SIZE and no bit loss occurs, so no change is required.

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix use-after-free in btrfs_encoded_read_endio() Shinichiro reported the following use-after free that sometimes is happening in our CI system when running fstests' btrfs/284 on a TCMU runner device: BUG: KASAN: slab-use-after-free in lock_release+0x708/0x780 Read of size 8 at addr ffff888106a83f18 by task kworker/u80:6/219 CPU: 8 UID: 0 PID: 219 Comm: kworker/u80:6 Not tainted 6.12.0-rc6-kts+ #15 Hardware name: Supermicro Super Server/X11SPi-TF, BIOS 3.3 02/21/2020 Workqueue: btrfs-endio btrfs_end_bio_work [btrfs] Call Trace: <TASK> dump_stack_lvl+0x6e/0xa0 ? lock_release+0x708/0x780 print_report+0x174/0x505 ? lock_release+0x708/0x780 ? __virt_addr_valid+0x224/0x410 ? lock_release+0x708/0x780 kasan_report+0xda/0x1b0 ? lock_release+0x708/0x780 ? __wake_up+0x44/0x60 lock_release+0x708/0x780 ? __pfx_lock_release+0x10/0x10 ? __pfx_do_raw_spin_lock+0x10/0x10 ? lock_is_held_type+0x9a/0x110 _raw_spin_unlock_irqrestore+0x1f/0x60 __wake_up+0x44/0x60 btrfs_encoded_read_endio+0x14b/0x190 [btrfs] btrfs_check_read_bio+0x8d9/0x1360 [btrfs] ? lock_release+0x1b0/0x780 ? trace_lock_acquire+0x12f/0x1a0 ? __pfx_btrfs_check_read_bio+0x10/0x10 [btrfs] ? process_one_work+0x7e3/0x1460 ? lock_acquire+0x31/0xc0 ? process_one_work+0x7e3/0x1460 process_one_work+0x85c/0x1460 ? __pfx_process_one_work+0x10/0x10 ? assign_work+0x16c/0x240 worker_thread+0x5e6/0xfc0 ? __pfx_worker_thread+0x10/0x10 kthread+0x2c3/0x3a0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x31/0x70 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 3661: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 btrfs_encoded_read_regular_fill_pages+0x16c/0x6d0 [btrfs] send_extent_data+0xf0f/0x24a0 [btrfs] process_extent+0x48a/0x1830 [btrfs] changed_cb+0x178b/0x2ea0 [btrfs] btrfs_ioctl_send+0x3bf9/0x5c20 [btrfs] _btrfs_ioctl_send+0x117/0x330 [btrfs] btrfs_ioctl+0x184a/0x60a0 [btrfs] __x64_sys_ioctl+0x12e/0x1a0 do_syscall_64+0x95/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e Freed by task 3661: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x70 __kasan_slab_free+0x4f/0x70 kfree+0x143/0x490 btrfs_encoded_read_regular_fill_pages+0x531/0x6d0 [btrfs] send_extent_data+0xf0f/0x24a0 [btrfs] process_extent+0x48a/0x1830 [btrfs] changed_cb+0x178b/0x2ea0 [btrfs] btrfs_ioctl_send+0x3bf9/0x5c20 [btrfs] _btrfs_ioctl_send+0x117/0x330 [btrfs] btrfs_ioctl+0x184a/0x60a0 [btrfs] __x64_sys_ioctl+0x12e/0x1a0 do_syscall_64+0x95/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e The buggy address belongs to the object at ffff888106a83f00 which belongs to the cache kmalloc-rnd-07-96 of size 96 The buggy address is located 24 bytes inside of freed 96-byte region [ffff888106a83f00, ffff888106a83f60) The buggy address belongs to the physical page: page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888106a83800 pfn:0x106a83 flags: 0x17ffffc0000000(node=0|zone=2|lastcpupid=0x1fffff) page_type: f5(slab) raw: 0017ffffc0000000 ffff888100053680 ffffea0004917200 0000000000000004 raw: ffff888106a83800 0000000080200019 00000001f5000000 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888106a83e00: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc ffff888106a83e80: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc >ffff888106a83f00: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc ^ ffff888106a83f80: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc ffff888106a84000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ================================================================== Further analyzing the trace and ---truncated---

In the Linux kernel, the following vulnerability has been resolved: bpf: fix OOB devmap writes when deleting elements Jordy reported issue against XSKMAP which also applies to DEVMAP - the index used for accessing map entry, due to being a signed integer, causes the OOB writes. Fix is simple as changing the type from int to u32, however, when compared to XSKMAP case, one more thing needs to be addressed. When map is released from system via dev_map_free(), we iterate through all of the entries and an iterator variable is also an int, which implies OOB accesses. Again, change it to be u32. Example splat below: [ 160.724676] BUG: unable to handle page fault for address: ffffc8fc2c001000 [ 160.731662] #PF: supervisor read access in kernel mode [ 160.736876] #PF: error_code(0x0000) - not-present page [ 160.742095] PGD 0 P4D 0 [ 160.744678] Oops: Oops: 0000 [#1] PREEMPT SMP [ 160.749106] CPU: 1 UID: 0 PID: 520 Comm: kworker/u145:12 Not tainted 6.12.0-rc1+ #487 [ 160.757050] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 [ 160.767642] Workqueue: events_unbound bpf_map_free_deferred [ 160.773308] RIP: 0010:dev_map_free+0x77/0x170 [ 160.777735] Code: 00 e8 fd 91 ed ff e8 b8 73 ed ff 41 83 7d 18 19 74 6e 41 8b 45 24 49 8b bd f8 00 00 00 31 db 85 c0 74 48 48 63 c3 48 8d 04 c7 <48> 8b 28 48 85 ed 74 30 48 8b 7d 18 48 85 ff 74 05 e8 b3 52 fa ff [ 160.796777] RSP: 0018:ffffc9000ee1fe38 EFLAGS: 00010202 [ 160.802086] RAX: ffffc8fc2c001000 RBX: 0000000080000000 RCX: 0000000000000024 [ 160.809331] RDX: 0000000000000000 RSI: 0000000000000024 RDI: ffffc9002c001000 [ 160.816576] RBP: 0000000000000000 R08: 0000000000000023 R09: 0000000000000001 [ 160.823823] R10: 0000000000000001 R11: 00000000000ee6b2 R12: dead000000000122 [ 160.831066] R13: ffff88810c928e00 R14: ffff8881002df405 R15: 0000000000000000 [ 160.838310] FS: 0000000000000000(0000) GS:ffff8897e0c40000(0000) knlGS:0000000000000000 [ 160.846528] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 160.852357] CR2: ffffc8fc2c001000 CR3: 0000000005c32006 CR4: 00000000007726f0 [ 160.859604] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 160.866847] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 160.874092] PKRU: 55555554 [ 160.876847] Call Trace: [ 160.879338] <TASK> [ 160.881477] ? __die+0x20/0x60 [ 160.884586] ? page_fault_oops+0x15a/0x450 [ 160.888746] ? search_extable+0x22/0x30 [ 160.892647] ? search_bpf_extables+0x5f/0x80 [ 160.896988] ? exc_page_fault+0xa9/0x140 [ 160.900973] ? asm_exc_page_fault+0x22/0x30 [ 160.905232] ? dev_map_free+0x77/0x170 [ 160.909043] ? dev_map_free+0x58/0x170 [ 160.912857] bpf_map_free_deferred+0x51/0x90 [ 160.917196] process_one_work+0x142/0x370 [ 160.921272] worker_thread+0x29e/0x3b0 [ 160.925082] ? rescuer_thread+0x4b0/0x4b0 [ 160.929157] kthread+0xd4/0x110 [ 160.932355] ? kthread_park+0x80/0x80 [ 160.936079] ret_from_fork+0x2d/0x50 [ 160.943396] ? kthread_park+0x80/0x80 [ 160.950803] ret_from_fork_asm+0x11/0x20 [ 160.958482] </TASK>

In the Linux kernel, the following vulnerability has been resolved: drm/dp_mst: Fix MST sideband message body length check Fix the MST sideband message body length check, which must be at least 1 byte accounting for the message body CRC (aka message data CRC) at the end of the message. This fixes a case where an MST branch device returns a header with a correct header CRC (indicating a correctly received body length), with the body length being incorrectly set to 0. This will later lead to a memory corruption in drm_dp_sideband_append_payload() and the following errors in dmesg: UBSAN: array-index-out-of-bounds in drivers/gpu/drm/display/drm_dp_mst_topology.c:786:25 index -1 is out of range for type 'u8 [48]' Call Trace: drm_dp_sideband_append_payload+0x33d/0x350 [drm_display_helper] drm_dp_get_one_sb_msg+0x3ce/0x5f0 [drm_display_helper] drm_dp_mst_hpd_irq_handle_event+0xc8/0x1580 [drm_display_helper] memcpy: detected field-spanning write (size 18446744073709551615) of single field "&msg->msg[msg->curlen]" at drivers/gpu/drm/display/drm_dp_mst_topology.c:791 (size 256) Call Trace: drm_dp_sideband_append_payload+0x324/0x350 [drm_display_helper] drm_dp_get_one_sb_msg+0x3ce/0x5f0 [drm_display_helper] drm_dp_mst_hpd_irq_handle_event+0xc8/0x1580 [drm_display_helper]

In the Linux kernel, the following vulnerability has been resolved: can: hi311x: hi3110_can_ist(): fix potential use-after-free The commit a22bd630cfff ("can: hi311x: do not report txerr and rxerr during bus-off") removed the reporting of rxerr and txerr even in case of correct operation (i. e. not bus-off). The error count information added to the CAN frame after netif_rx() is a potential use after free, since there is no guarantee that the skb is in the same state. It might be freed or reused. Fix the issue by postponing the netif_rx() call in case of txerr and rxerr reporting.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Adding array index check to prevent memory corruption [Why & How] Array indices out of bound caused memory corruption. Adding checks to ensure that array index stays in bound.

In the Linux kernel, the following vulnerability has been resolved: binder: fix freeze UAF in binder_release_work() When a binder reference is cleaned up, any freeze work queued in the associated process should also be removed. Otherwise, the reference is freed while its ref->freeze.work is still queued in proc->work leading to a use-after-free issue as shown by the following KASAN report: ================================================================== BUG: KASAN: slab-use-after-free in binder_release_work+0x398/0x3d0 Read of size 8 at addr ffff31600ee91488 by task kworker/5:1/211 CPU: 5 UID: 0 PID: 211 Comm: kworker/5:1 Not tainted 6.11.0-rc7-00382-gfc6c92196396 #22 Hardware name: linux,dummy-virt (DT) Workqueue: events binder_deferred_func Call trace: binder_release_work+0x398/0x3d0 binder_deferred_func+0xb60/0x109c process_one_work+0x51c/0xbd4 worker_thread+0x608/0xee8 Allocated by task 703: __kmalloc_cache_noprof+0x130/0x280 binder_thread_write+0xdb4/0x42a0 binder_ioctl+0x18f0/0x25ac __arm64_sys_ioctl+0x124/0x190 invoke_syscall+0x6c/0x254 Freed by task 211: kfree+0xc4/0x230 binder_deferred_func+0xae8/0x109c process_one_work+0x51c/0xbd4 worker_thread+0x608/0xee8 ================================================================== This commit fixes the issue by ensuring any queued freeze work is removed when cleaning up a binder reference.

In the Linux kernel, the following vulnerability has been resolved: bonding: fix use-after-free due to enslave fail after slave array update Fix a use-after-free which happens due to enslave failure after the new slave has been added to the array. Since the new slave can be used for Tx immediately, we can use it after it has been freed by the enslave error cleanup path which frees the allocated slave memory. Slave update array is supposed to be called last when further enslave failures are not expected. Move it after xdp setup to avoid any problems. It is very easy to reproduce the problem with a simple xdp_pass prog: ip l add bond1 type bond mode balance-xor ip l set bond1 up ip l set dev bond1 xdp object xdp_pass.o sec xdp_pass ip l add dumdum type dummy Then run in parallel: while :; do ip l set dumdum master bond1 1>/dev/null 2>&1; done; mausezahn bond1 -a own -b rand -A rand -B 1.1.1.1 -c 0 -t tcp "dp=1-1023, flags=syn" The crash happens almost immediately: [ 605.602850] Oops: general protection fault, probably for non-canonical address 0xe0e6fc2460000137: 0000 [#1] SMP KASAN NOPTI [ 605.602916] KASAN: maybe wild-memory-access in range [0x07380123000009b8-0x07380123000009bf] [ 605.602946] CPU: 0 UID: 0 PID: 2445 Comm: mausezahn Kdump: loaded Tainted: G B 6.19.0-rc6+ #21 PREEMPT(voluntary) [ 605.602979] Tainted: [B]=BAD_PAGE [ 605.602998] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 605.603032] RIP: 0010:netdev_core_pick_tx+0xcd/0x210 [ 605.603063] Code: 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 3e 01 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b 6b 08 49 8d 7d 30 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 25 01 00 00 49 8b 45 30 4c 89 e2 48 89 ee 48 89 [ 605.603111] RSP: 0018:ffff88817b9af348 EFLAGS: 00010213 [ 605.603145] RAX: dffffc0000000000 RBX: ffff88817d28b420 RCX: 0000000000000000 [ 605.603172] RDX: 00e7002460000137 RSI: 0000000000000008 RDI: 07380123000009be [ 605.603199] RBP: ffff88817b541a00 R08: 0000000000000001 R09: fffffbfff3ed8c0c [ 605.603226] R10: ffffffff9f6c6067 R11: 0000000000000001 R12: 0000000000000000 [ 605.603253] R13: 073801230000098e R14: ffff88817d28b448 R15: ffff88817b541a84 [ 605.603286] FS: 00007f6570ef67c0(0000) GS:ffff888221dfa000(0000) knlGS:0000000000000000 [ 605.603319] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 605.603343] CR2: 00007f65712fae40 CR3: 000000011371b000 CR4: 0000000000350ef0 [ 605.603373] Call Trace: [ 605.603392] <TASK> [ 605.603410] __dev_queue_xmit+0x448/0x32a0 [ 605.603434] ? __pfx_vprintk_emit+0x10/0x10 [ 605.603461] ? __pfx_vprintk_emit+0x10/0x10 [ 605.603484] ? __pfx___dev_queue_xmit+0x10/0x10 [ 605.603507] ? bond_start_xmit+0xbfb/0xc20 [bonding] [ 605.603546] ? _printk+0xcb/0x100 [ 605.603566] ? __pfx__printk+0x10/0x10 [ 605.603589] ? bond_start_xmit+0xbfb/0xc20 [bonding] [ 605.603627] ? add_taint+0x5e/0x70 [ 605.603648] ? add_taint+0x2a/0x70 [ 605.603670] ? end_report.cold+0x51/0x75 [ 605.603693] ? bond_start_xmit+0xbfb/0xc20 [bonding] [ 605.603731] bond_start_xmit+0x623/0xc20 [bonding]

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix use-after-free when COWing tree bock and tracing is enabled When a COWing a tree block, at btrfs_cow_block(), and we have the tracepoint trace_btrfs_cow_block() enabled and preemption is also enabled (CONFIG_PREEMPT=y), we can trigger a use-after-free in the COWed extent buffer while inside the tracepoint code. This is because in some paths that call btrfs_cow_block(), such as btrfs_search_slot(), we are holding the last reference on the extent buffer @buf so btrfs_force_cow_block() drops the last reference on the @buf extent buffer when it calls free_extent_buffer_stale(buf), which schedules the release of the extent buffer with RCU. This means that if we are on a kernel with preemption, the current task may be preempted before calling trace_btrfs_cow_block() and the extent buffer already released by the time trace_btrfs_cow_block() is called, resulting in a use-after-free. Fix this by moving the trace_btrfs_cow_block() from btrfs_cow_block() to btrfs_force_cow_block() before the COWed extent buffer is freed. This also has a side effect of invoking the tracepoint in the tree defrag code, at defrag.c:btrfs_realloc_node(), since btrfs_force_cow_block() is called there, but this is fine and it was actually missing there.

In the Linux kernel, the following vulnerability has been resolved: powerpc/pseries/vas: Add close() callback in vas_vm_ops struct The mapping VMA address is saved in VAS window struct when the paste address is mapped. This VMA address is used during migration to unmap the paste address if the window is active. The paste address mapping will be removed when the window is closed or with the munmap(). But the VMA address in the VAS window is not updated with munmap() which is causing invalid access during migration. The KASAN report shows: [16386.254991] BUG: KASAN: slab-use-after-free in reconfig_close_windows+0x1a0/0x4e8 [16386.255043] Read of size 8 at addr c00000014a819670 by task drmgr/696928 [16386.255096] CPU: 29 UID: 0 PID: 696928 Comm: drmgr Kdump: loaded Tainted: G B 6.11.0-rc5-nxgzip #2 [16386.255128] Tainted: [B]=BAD_PAGE [16386.255148] Hardware name: IBM,9080-HEX Power11 (architected) 0x820200 0xf000007 of:IBM,FW1110.00 (NH1110_016) hv:phyp pSeries [16386.255181] Call Trace: [16386.255202] [c00000016b297660] [c0000000018ad0ac] dump_stack_lvl+0x84/0xe8 (unreliable) [16386.255246] [c00000016b297690] [c0000000006e8a90] print_report+0x19c/0x764 [16386.255285] [c00000016b297760] [c0000000006e9490] kasan_report+0x128/0x1f8 [16386.255309] [c00000016b297880] [c0000000006eb5c8] __asan_load8+0xac/0xe0 [16386.255326] [c00000016b2978a0] [c00000000013f898] reconfig_close_windows+0x1a0/0x4e8 [16386.255343] [c00000016b297990] [c000000000140e58] vas_migration_handler+0x3a4/0x3fc [16386.255368] [c00000016b297a90] [c000000000128848] pseries_migrate_partition+0x4c/0x4c4 ... [16386.256136] Allocated by task 696554 on cpu 31 at 16377.277618s: [16386.256149] kasan_save_stack+0x34/0x68 [16386.256163] kasan_save_track+0x34/0x80 [16386.256175] kasan_save_alloc_info+0x58/0x74 [16386.256196] __kasan_slab_alloc+0xb8/0xdc [16386.256209] kmem_cache_alloc_noprof+0x200/0x3d0 [16386.256225] vm_area_alloc+0x44/0x150 [16386.256245] mmap_region+0x214/0x10c4 [16386.256265] do_mmap+0x5fc/0x750 [16386.256277] vm_mmap_pgoff+0x14c/0x24c [16386.256292] ksys_mmap_pgoff+0x20c/0x348 [16386.256303] sys_mmap+0xd0/0x160 ... [16386.256350] Freed by task 0 on cpu 31 at 16386.204848s: [16386.256363] kasan_save_stack+0x34/0x68 [16386.256374] kasan_save_track+0x34/0x80 [16386.256384] kasan_save_free_info+0x64/0x10c [16386.256396] __kasan_slab_free+0x120/0x204 [16386.256415] kmem_cache_free+0x128/0x450 [16386.256428] vm_area_free_rcu_cb+0xa8/0xd8 [16386.256441] rcu_do_batch+0x2c8/0xcf0 [16386.256458] rcu_core+0x378/0x3c4 [16386.256473] handle_softirqs+0x20c/0x60c [16386.256495] do_softirq_own_stack+0x6c/0x88 [16386.256509] do_softirq_own_stack+0x58/0x88 [16386.256521] __irq_exit_rcu+0x1a4/0x20c [16386.256533] irq_exit+0x20/0x38 [16386.256544] interrupt_async_exit_prepare.constprop.0+0x18/0x2c ... [16386.256717] Last potentially related work creation: [16386.256729] kasan_save_stack+0x34/0x68 [16386.256741] __kasan_record_aux_stack+0xcc/0x12c [16386.256753] __call_rcu_common.constprop.0+0x94/0xd04 [16386.256766] vm_area_free+0x28/0x3c [16386.256778] remove_vma+0xf4/0x114 [16386.256797] do_vmi_align_munmap.constprop.0+0x684/0x870 [16386.256811] __vm_munmap+0xe0/0x1f8 [16386.256821] sys_munmap+0x54/0x6c [16386.256830] system_call_exception+0x1a0/0x4a0 [16386.256841] system_call_vectored_common+0x15c/0x2ec [16386.256868] The buggy address belongs to the object at c00000014a819670 which belongs to the cache vm_area_struct of size 168 [16386.256887] The buggy address is located 0 bytes inside of freed 168-byte region [c00000014a819670, c00000014a819718) [16386.256915] The buggy address belongs to the physical page: [16386.256928] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x14a81 [16386.256950] memcg:c0000000ba430001 [16386.256961] anon flags: 0x43ffff800000000(node=4|zone=0|lastcpupid=0x7ffff) [16386.256975] page_type: 0xfdffffff(slab) [16386 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix use after free on unload System crash is observed with stack trace warning of use after free. There are 2 signals to tell dpc_thread to terminate (UNLOADING flag and kthread_stop). On setting the UNLOADING flag when dpc_thread happens to run at the time and sees the flag, this causes dpc_thread to exit and clean up itself. When kthread_stop is called for final cleanup, this causes use after free. Remove UNLOADING signal to terminate dpc_thread. Use the kthread_stop as the main signal to exit dpc_thread. [596663.812935] kernel BUG at mm/slub.c:294! [596663.812950] invalid opcode: 0000 [#1] SMP PTI [596663.812957] CPU: 13 PID: 1475935 Comm: rmmod Kdump: loaded Tainted: G IOE --------- - - 4.18.0-240.el8.x86_64 #1 [596663.812960] Hardware name: HP ProLiant DL380p Gen8, BIOS P70 08/20/2012 [596663.812974] RIP: 0010:__slab_free+0x17d/0x360 ... [596663.813008] Call Trace: [596663.813022] ? __dentry_kill+0x121/0x170 [596663.813030] ? _cond_resched+0x15/0x30 [596663.813034] ? _cond_resched+0x15/0x30 [596663.813039] ? wait_for_completion+0x35/0x190 [596663.813048] ? try_to_wake_up+0x63/0x540 [596663.813055] free_task+0x5a/0x60 [596663.813061] kthread_stop+0xf3/0x100 [596663.813103] qla2x00_remove_one+0x284/0x440 [qla2xxx]

In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_pipapo: split gc into unlink and reclaim phase Yiming Qian reports Use-after-free in the pipapo set type: Under a large number of expired elements, commit-time GC can run for a very long time in a non-preemptible context, triggering soft lockup warnings and RCU stall reports (local denial of service). We must split GC in an unlink and a reclaim phase. We cannot queue elements for freeing until pointers have been swapped. Expired elements are still exposed to both the packet path and userspace dumpers via the live copy of the data structure. call_rcu() does not protect us: dump operations or element lookups starting after call_rcu has fired can still observe the free'd element, unless the commit phase has made enough progress to swap the clone and live pointers before any new reader has picked up the old version. This a similar approach as done recently for the rbtree backend in commit 35f83a75529a ("netfilter: nft_set_rbtree: don't gc elements on insert").

In the Linux kernel, the following vulnerability has been resolved: KVM: PPC: Book3S HV: Prevent UAF in kvm_spapr_tce_attach_iommu_group() Al reported a possible use-after-free (UAF) in kvm_spapr_tce_attach_iommu_group(). It looks up `stt` from tablefd, but then continues to use it after doing fdput() on the returned fd. After the fdput() the tablefd is free to be closed by another thread. The close calls kvm_spapr_tce_release() and then release_spapr_tce_table() (via call_rcu()) which frees `stt`. Although there are calls to rcu_read_lock() in kvm_spapr_tce_attach_iommu_group() they are not sufficient to prevent the UAF, because `stt` is used outside the locked regions. With an artifcial delay after the fdput() and a userspace program which triggers the race, KASAN detects the UAF: BUG: KASAN: slab-use-after-free in kvm_spapr_tce_attach_iommu_group+0x298/0x720 [kvm] Read of size 4 at addr c000200027552c30 by task kvm-vfio/2505 CPU: 54 PID: 2505 Comm: kvm-vfio Not tainted 6.10.0-rc3-next-20240612-dirty #1 Hardware name: 8335-GTH POWER9 0x4e1202 opal:skiboot-v6.5.3-35-g1851b2a06 PowerNV Call Trace: dump_stack_lvl+0xb4/0x108 (unreliable) print_report+0x2b4/0x6ec kasan_report+0x118/0x2b0 __asan_load4+0xb8/0xd0 kvm_spapr_tce_attach_iommu_group+0x298/0x720 [kvm] kvm_vfio_set_attr+0x524/0xac0 [kvm] kvm_device_ioctl+0x144/0x240 [kvm] sys_ioctl+0x62c/0x1810 system_call_exception+0x190/0x440 system_call_vectored_common+0x15c/0x2ec ... Freed by task 0: ... kfree+0xec/0x3e0 release_spapr_tce_table+0xd4/0x11c [kvm] rcu_core+0x568/0x16a0 handle_softirqs+0x23c/0x920 do_softirq_own_stack+0x6c/0x90 do_softirq_own_stack+0x58/0x90 __irq_exit_rcu+0x218/0x2d0 irq_exit+0x30/0x80 arch_local_irq_restore+0x128/0x230 arch_local_irq_enable+0x1c/0x30 cpuidle_enter_state+0x134/0x5cc cpuidle_enter+0x6c/0xb0 call_cpuidle+0x7c/0x100 do_idle+0x394/0x410 cpu_startup_entry+0x60/0x70 start_secondary+0x3fc/0x410 start_secondary_prolog+0x10/0x14 Fix it by delaying the fdput() until `stt` is no longer in use, which is effectively the entire function. To keep the patch minimal add a call to fdput() at each of the existing return paths. Future work can convert the function to goto or __cleanup style cleanup. With the fix in place the test case no longer triggers the UAF.

In the Linux kernel, the following vulnerability has been resolved: NFS: Fix potential buffer overflowin nfs_sysfs_link_rpc_client() name is char[64] where the size of clnt->cl_program->name remains unknown. Invoking strcat() directly will also lead to potential buffer overflow. Change them to strscpy() and strncat() to fix potential issues.

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix a use-after-free when hitting errors inside btrfs_submit_chunk() [BUG] There is an internal report that KASAN is reporting use-after-free, with the following backtrace: BUG: KASAN: slab-use-after-free in btrfs_check_read_bio+0xa68/0xb70 [btrfs] Read of size 4 at addr ffff8881117cec28 by task kworker/u16:2/45 CPU: 1 UID: 0 PID: 45 Comm: kworker/u16:2 Not tainted 6.11.0-rc2-next-20240805-default+ #76 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014 Workqueue: btrfs-endio btrfs_end_bio_work [btrfs] Call Trace: dump_stack_lvl+0x61/0x80 print_address_description.constprop.0+0x5e/0x2f0 print_report+0x118/0x216 kasan_report+0x11d/0x1f0 btrfs_check_read_bio+0xa68/0xb70 [btrfs] process_one_work+0xce0/0x12a0 worker_thread+0x717/0x1250 kthread+0x2e3/0x3c0 ret_from_fork+0x2d/0x70 ret_from_fork_asm+0x11/0x20 Allocated by task 20917: kasan_save_stack+0x37/0x60 kasan_save_track+0x10/0x30 __kasan_slab_alloc+0x7d/0x80 kmem_cache_alloc_noprof+0x16e/0x3e0 mempool_alloc_noprof+0x12e/0x310 bio_alloc_bioset+0x3f0/0x7a0 btrfs_bio_alloc+0x2e/0x50 [btrfs] submit_extent_page+0x4d1/0xdb0 [btrfs] btrfs_do_readpage+0x8b4/0x12a0 [btrfs] btrfs_readahead+0x29a/0x430 [btrfs] read_pages+0x1a7/0xc60 page_cache_ra_unbounded+0x2ad/0x560 filemap_get_pages+0x629/0xa20 filemap_read+0x335/0xbf0 vfs_read+0x790/0xcb0 ksys_read+0xfd/0x1d0 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 Freed by task 20917: kasan_save_stack+0x37/0x60 kasan_save_track+0x10/0x30 kasan_save_free_info+0x37/0x50 __kasan_slab_free+0x4b/0x60 kmem_cache_free+0x214/0x5d0 bio_free+0xed/0x180 end_bbio_data_read+0x1cc/0x580 [btrfs] btrfs_submit_chunk+0x98d/0x1880 [btrfs] btrfs_submit_bio+0x33/0x70 [btrfs] submit_one_bio+0xd4/0x130 [btrfs] submit_extent_page+0x3ea/0xdb0 [btrfs] btrfs_do_readpage+0x8b4/0x12a0 [btrfs] btrfs_readahead+0x29a/0x430 [btrfs] read_pages+0x1a7/0xc60 page_cache_ra_unbounded+0x2ad/0x560 filemap_get_pages+0x629/0xa20 filemap_read+0x335/0xbf0 vfs_read+0x790/0xcb0 ksys_read+0xfd/0x1d0 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 [CAUSE] Although I cannot reproduce the error, the report itself is good enough to pin down the cause. The call trace is the regular endio workqueue context, but the free-by-task trace is showing that during btrfs_submit_chunk() we already hit a critical error, and is calling btrfs_bio_end_io() to error out. And the original endio function called bio_put() to free the whole bio. This means a double freeing thus causing use-after-free, e.g.: 1. Enter btrfs_submit_bio() with a read bio The read bio length is 128K, crossing two 64K stripes. 2. The first run of btrfs_submit_chunk() 2.1 Call btrfs_map_block(), which returns 64K 2.2 Call btrfs_split_bio() Now there are two bios, one referring to the first 64K, the other referring to the second 64K. 2.3 The first half is submitted. 3. The second run of btrfs_submit_chunk() 3.1 Call btrfs_map_block(), which by somehow failed Now we call btrfs_bio_end_io() to handle the error 3.2 btrfs_bio_end_io() calls the original endio function Which is end_bbio_data_read(), and it calls bio_put() for the original bio. Now the original bio is freed. 4. The submitted first 64K bio finished Now we call into btrfs_check_read_bio() and tries to advance the bio iter. But since the original bio (thus its iter) is already freed, we trigger the above use-after free. And even if the memory is not poisoned/corrupted, we will later call the original endio function, causing a double freeing. [FIX] Instead of calling btrfs_bio_end_io(), call btrfs_orig_bbio_end_io(), which has the extra check on split bios and do the pr ---truncated---

In the Linux kernel, the following vulnerability has been resolved: bnx2x: Fix multiple UBSAN array-index-out-of-bounds Fix UBSAN warnings that occur when using a system with 32 physical cpu cores or more, or when the user defines a number of Ethernet queues greater than or equal to FP_SB_MAX_E1x using the num_queues module parameter. Currently there is a read/write out of bounds that occurs on the array "struct stats_query_entry query" present inside the "bnx2x_fw_stats_req" struct in "drivers/net/ethernet/broadcom/bnx2x/bnx2x.h". Looking at the definition of the "struct stats_query_entry query" array: struct stats_query_entry query[FP_SB_MAX_E1x+ BNX2X_FIRST_QUEUE_QUERY_IDX]; FP_SB_MAX_E1x is defined as the maximum number of fast path interrupts and has a value of 16, while BNX2X_FIRST_QUEUE_QUERY_IDX has a value of 3 meaning the array has a total size of 19. Since accesses to "struct stats_query_entry query" are offset-ted by BNX2X_FIRST_QUEUE_QUERY_IDX, that means that the total number of Ethernet queues should not exceed FP_SB_MAX_E1x (16). However one of these queues is reserved for FCOE and thus the number of Ethernet queues should be set to [FP_SB_MAX_E1x -1] (15) if FCOE is enabled or [FP_SB_MAX_E1x] (16) if it is not. This is also described in a comment in the source code in drivers/net/ethernet/broadcom/bnx2x/bnx2x.h just above the Macro definition of FP_SB_MAX_E1x. Below is the part of this explanation that it important for this patch /* * The total number of L2 queues, MSIX vectors and HW contexts (CIDs) is * control by the number of fast-path status blocks supported by the * device (HW/FW). Each fast-path status block (FP-SB) aka non-default * status block represents an independent interrupts context that can * serve a regular L2 networking queue. However special L2 queues such * as the FCoE queue do not require a FP-SB and other components like * the CNIC may consume FP-SB reducing the number of possible L2 queues * * If the maximum number of FP-SB available is X then: * a. If CNIC is supported it consumes 1 FP-SB thus the max number of * regular L2 queues is Y=X-1 * b. In MF mode the actual number of L2 queues is Y= (X-1/MF_factor) * c. If the FCoE L2 queue is supported the actual number of L2 queues * is Y+1 * d. The number of irqs (MSIX vectors) is either Y+1 (one extra for * slow-path interrupts) or Y+2 if CNIC is supported (one additional * FP interrupt context for the CNIC). * e. The number of HW context (CID count) is always X or X+1 if FCoE * L2 queue is supported. The cid for the FCoE L2 queue is always X. */ However this driver also supports NICs that use the E2 controller which can handle more queues due to having more FP-SB represented by FP_SB_MAX_E2. Looking at the commits when the E2 support was added, it was originally using the E1x parameters: commit f2e0899f0f27 ("bnx2x: Add 57712 support"). Back then FP_SB_MAX_E2 was set to 16 the same as E1x. However the driver was later updated to take full advantage of the E2 instead of having it be limited to the capabilities of the E1x. But as far as we can tell, the array "stats_query_entry query" was still limited to using the FP-SB available to the E1x cards as part of an oversignt when the driver was updated to take full advantage of the E2, and now with the driver being aware of the greater queue size supported by E2 NICs, it causes the UBSAN warnings seen in the stack traces below. This patch increases the size of the "stats_query_entry query" array by replacing FP_SB_MAX_E1x with FP_SB_MAX_E2 to be large enough to handle both types of NICs. Stack traces: UBSAN: array-index-out-of-bounds in drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c:1529:11 index 20 is out of range for type 'stats_query_entry [19]' CPU: 12 PID: 858 Comm: systemd-network Not tainted 6.9.0-060900rc7-generic #202405052133 Hardware name: HP ProLiant DL360 Gen9/ProLiant DL360 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: net: macb: fix use-after-free access to PTP clock PTP clock is registered on every opening of the interface and destroyed on every closing. However it may be accessed via get_ts_info ethtool call which is possible while the interface is just present in the kernel. BUG: KASAN: use-after-free in ptp_clock_index+0x47/0x50 drivers/ptp/ptp_clock.c:426 Read of size 4 at addr ffff8880194345cc by task syz.0.6/948 CPU: 1 PID: 948 Comm: syz.0.6 Not tainted 6.1.164+ #109 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.1-0-g3208b098f51a-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x8d/0xba lib/dump_stack.c:106 print_address_description mm/kasan/report.c:316 [inline] print_report+0x17f/0x496 mm/kasan/report.c:420 kasan_report+0xd9/0x180 mm/kasan/report.c:524 ptp_clock_index+0x47/0x50 drivers/ptp/ptp_clock.c:426 gem_get_ts_info+0x138/0x1e0 drivers/net/ethernet/cadence/macb_main.c:3349 macb_get_ts_info+0x68/0xb0 drivers/net/ethernet/cadence/macb_main.c:3371 __ethtool_get_ts_info+0x17c/0x260 net/ethtool/common.c:558 ethtool_get_ts_info net/ethtool/ioctl.c:2367 [inline] __dev_ethtool net/ethtool/ioctl.c:3017 [inline] dev_ethtool+0x2b05/0x6290 net/ethtool/ioctl.c:3095 dev_ioctl+0x637/0x1070 net/core/dev_ioctl.c:510 sock_do_ioctl+0x20d/0x2c0 net/socket.c:1215 sock_ioctl+0x577/0x6d0 net/socket.c:1320 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl fs/ioctl.c:856 [inline] __x64_sys_ioctl+0x18c/0x210 fs/ioctl.c:856 do_syscall_x64 arch/x86/entry/common.c:46 [inline] do_syscall_64+0x35/0x80 arch/x86/entry/common.c:76 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 </TASK> Allocated by task 457: kmalloc include/linux/slab.h:563 [inline] kzalloc include/linux/slab.h:699 [inline] ptp_clock_register+0x144/0x10e0 drivers/ptp/ptp_clock.c:235 gem_ptp_init+0x46f/0x930 drivers/net/ethernet/cadence/macb_ptp.c:375 macb_open+0x901/0xd10 drivers/net/ethernet/cadence/macb_main.c:2920 __dev_open+0x2ce/0x500 net/core/dev.c:1501 __dev_change_flags+0x56a/0x740 net/core/dev.c:8651 dev_change_flags+0x92/0x170 net/core/dev.c:8722 do_setlink+0xaf8/0x3a80 net/core/rtnetlink.c:2833 __rtnl_newlink+0xbf4/0x1940 net/core/rtnetlink.c:3608 rtnl_newlink+0x63/0xa0 net/core/rtnetlink.c:3655 rtnetlink_rcv_msg+0x3c6/0xed0 net/core/rtnetlink.c:6150 netlink_rcv_skb+0x15d/0x430 net/netlink/af_netlink.c:2511 netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline] netlink_unicast+0x6d7/0xa30 net/netlink/af_netlink.c:1344 netlink_sendmsg+0x97e/0xeb0 net/netlink/af_netlink.c:1872 sock_sendmsg_nosec net/socket.c:718 [inline] __sock_sendmsg+0x14b/0x180 net/socket.c:730 __sys_sendto+0x320/0x3b0 net/socket.c:2152 __do_sys_sendto net/socket.c:2164 [inline] __se_sys_sendto net/socket.c:2160 [inline] __x64_sys_sendto+0xdc/0x1b0 net/socket.c:2160 do_syscall_x64 arch/x86/entry/common.c:46 [inline] do_syscall_64+0x35/0x80 arch/x86/entry/common.c:76 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Freed by task 938: kasan_slab_free include/linux/kasan.h:177 [inline] slab_free_hook mm/slub.c:1729 [inline] slab_free_freelist_hook mm/slub.c:1755 [inline] slab_free mm/slub.c:3687 [inline] __kmem_cache_free+0xbc/0x320 mm/slub.c:3700 device_release+0xa0/0x240 drivers/base/core.c:2507 kobject_cleanup lib/kobject.c:681 [inline] kobject_release lib/kobject.c:712 [inline] kref_put include/linux/kref.h:65 [inline] kobject_put+0x1cd/0x350 lib/kobject.c:729 put_device+0x1b/0x30 drivers/base/core.c:3805 ptp_clock_unregister+0x171/0x270 drivers/ptp/ptp_clock.c:391 gem_ptp_remove+0x4e/0x1f0 drivers/net/ethernet/cadence/macb_ptp.c:404 macb_close+0x1c8/0x270 drivers/net/ethernet/cadence/macb_main.c:2966 __dev_close_many+0x1b9/0x310 net/core/dev.c:1585 __dev_close net/core/dev.c:1597 [inline] __dev_change_flags+0x2bb/0x740 net/core/dev.c:8649 dev_change_fl ---truncated---

In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: bsg: Set bsg_queue to NULL after removal Currently, this does not cause any issues, but I believe it is necessary to set bsg_queue to NULL after removing it to prevent potential use-after-free (UAF) access.

In the Linux kernel, the following vulnerability has been resolved: media: s5p-jpeg: prevent buffer overflows The current logic allows word to be less than 2. If this happens, there will be buffer overflows, as reported by smatch. Add extra checks to prevent it. While here, remove an unused word = 0 assignment.

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix use-after-free of signing key Customers have reported use-after-free in @ses->auth_key.response with SMB2.1 + sign mounts which occurs due to following race: task A task B cifs_mount() dfs_mount_share() get_session() cifs_mount_get_session() cifs_send_recv() cifs_get_smb_ses() compound_send_recv() cifs_setup_session() smb2_setup_request() kfree_sensitive() smb2_calc_signature() crypto_shash_setkey() *UAF* Fix this by ensuring that we have a valid @ses->auth_key.response by checking whether @ses->ses_status is SES_GOOD or SES_EXITING with @ses->ses_lock held. After commit 24a9799aa8ef ("smb: client: fix UAF in smb2_reconnect_server()"), we made sure to call ->logoff() only when @ses was known to be good (e.g. valid ->auth_key.response), so it's safe to access signing key when @ses->ses_status == SES_EXITING.

In the Linux kernel, the following vulnerability has been resolved: smb: prevent use-after-free due to open_cached_dir error paths If open_cached_dir() encounters an error parsing the lease from the server, the error handling may race with receiving a lease break, resulting in open_cached_dir() freeing the cfid while the queued work is pending. Update open_cached_dir() to drop refs rather than directly freeing the cfid. Have cached_dir_lease_break(), cfids_laundromat_worker(), and invalidate_all_cached_dirs() clear has_lease immediately while still holding cfids->cfid_list_lock, and then use this to also simplify the reference counting in cfids_laundromat_worker() and invalidate_all_cached_dirs(). Fixes this KASAN splat (which manually injects an error and lease break in open_cached_dir()): ================================================================== BUG: KASAN: slab-use-after-free in smb2_cached_lease_break+0x27/0xb0 Read of size 8 at addr ffff88811cc24c10 by task kworker/3:1/65 CPU: 3 UID: 0 PID: 65 Comm: kworker/3:1 Not tainted 6.12.0-rc6-g255cf264e6e5-dirty #87 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020 Workqueue: cifsiod smb2_cached_lease_break Call Trace: <TASK> dump_stack_lvl+0x77/0xb0 print_report+0xce/0x660 kasan_report+0xd3/0x110 smb2_cached_lease_break+0x27/0xb0 process_one_work+0x50a/0xc50 worker_thread+0x2ba/0x530 kthread+0x17c/0x1c0 ret_from_fork+0x34/0x60 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 2464: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 open_cached_dir+0xa7d/0x1fb0 smb2_query_path_info+0x43c/0x6e0 cifs_get_fattr+0x346/0xf10 cifs_get_inode_info+0x157/0x210 cifs_revalidate_dentry_attr+0x2d1/0x460 cifs_getattr+0x173/0x470 vfs_statx_path+0x10f/0x160 vfs_statx+0xe9/0x150 vfs_fstatat+0x5e/0xc0 __do_sys_newfstatat+0x91/0xf0 do_syscall_64+0x95/0x1a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e Freed by task 2464: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x51/0x70 kfree+0x174/0x520 open_cached_dir+0x97f/0x1fb0 smb2_query_path_info+0x43c/0x6e0 cifs_get_fattr+0x346/0xf10 cifs_get_inode_info+0x157/0x210 cifs_revalidate_dentry_attr+0x2d1/0x460 cifs_getattr+0x173/0x470 vfs_statx_path+0x10f/0x160 vfs_statx+0xe9/0x150 vfs_fstatat+0x5e/0xc0 __do_sys_newfstatat+0x91/0xf0 do_syscall_64+0x95/0x1a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e Last potentially related work creation: kasan_save_stack+0x33/0x60 __kasan_record_aux_stack+0xad/0xc0 insert_work+0x32/0x100 __queue_work+0x5c9/0x870 queue_work_on+0x82/0x90 open_cached_dir+0x1369/0x1fb0 smb2_query_path_info+0x43c/0x6e0 cifs_get_fattr+0x346/0xf10 cifs_get_inode_info+0x157/0x210 cifs_revalidate_dentry_attr+0x2d1/0x460 cifs_getattr+0x173/0x470 vfs_statx_path+0x10f/0x160 vfs_statx+0xe9/0x150 vfs_fstatat+0x5e/0xc0 __do_sys_newfstatat+0x91/0xf0 do_syscall_64+0x95/0x1a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e The buggy address belongs to the object at ffff88811cc24c00 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 16 bytes inside of freed 1024-byte region [ffff88811cc24c00, ffff88811cc25000)