In the Linux kernel, the following vulnerability has been resolved: mm/damon/vaddr-test: fix memory leak in damon_do_test_apply_three_regions() When CONFIG_DAMON_VADDR_KUNIT_TEST=y and making CONFIG_DEBUG_KMEMLEAK=y and CONFIG_DEBUG_KMEMLEAK_AUTO_SCAN=y, the below memory leak is detected. Since commit 9f86d624292c ("mm/damon/vaddr-test: remove unnecessary variables"), the damon_destroy_ctx() is removed, but still call damon_new_target() and damon_new_region(), the damon_region which is allocated by kmem_cache_alloc() in damon_new_region() and the damon_target which is allocated by kmalloc in damon_new_target() are not freed. And the damon_region which is allocated in damon_new_region() in damon_set_regions() is also not freed. So use damon_destroy_target to free all the damon_regions and damon_target. unreferenced object 0xffff888107c9a940 (size 64): comm "kunit_try_catch", pid 1069, jiffies 4294670592 (age 732.761s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 06 00 00 00 6b 6b 6b 6b ............kkkk 60 c7 9c 07 81 88 ff ff f8 cb 9c 07 81 88 ff ff `............... backtrace: [<ffffffff817e0167>] kmalloc_trace+0x27/0xa0 [<ffffffff819c11cf>] damon_new_target+0x3f/0x1b0 [<ffffffff819c7d55>] damon_do_test_apply_three_regions.constprop.0+0x95/0x3e0 [<ffffffff819c82be>] damon_test_apply_three_regions1+0x21e/0x260 [<ffffffff829fce6a>] kunit_generic_run_threadfn_adapter+0x4a/0x90 [<ffffffff81237cf6>] kthread+0x2b6/0x380 [<ffffffff81097add>] ret_from_fork+0x2d/0x70 [<ffffffff81003791>] ret_from_fork_asm+0x11/0x20 unreferenced object 0xffff8881079cc740 (size 56): comm "kunit_try_catch", pid 1069, jiffies 4294670592 (age 732.761s) hex dump (first 32 bytes): 05 00 00 00 00 00 00 00 14 00 00 00 00 00 00 00 ................ 6b 6b 6b 6b 6b 6b 6b 6b 00 00 00 00 6b 6b 6b 6b kkkkkkkk....kkkk backtrace: [<ffffffff819bc492>] damon_new_region+0x22/0x1c0 [<ffffffff819c7d91>] damon_do_test_apply_three_regions.constprop.0+0xd1/0x3e0 [<ffffffff819c82be>] damon_test_apply_three_regions1+0x21e/0x260 [<ffffffff829fce6a>] kunit_generic_run_threadfn_adapter+0x4a/0x90 [<ffffffff81237cf6>] kthread+0x2b6/0x380 [<ffffffff81097add>] ret_from_fork+0x2d/0x70 [<ffffffff81003791>] ret_from_fork_asm+0x11/0x20 unreferenced object 0xffff888107c9ac40 (size 64): comm "kunit_try_catch", pid 1071, jiffies 4294670595 (age 732.843s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 06 00 00 00 6b 6b 6b 6b ............kkkk a0 cc 9c 07 81 88 ff ff 78 a1 76 07 81 88 ff ff ........x.v..... backtrace: [<ffffffff817e0167>] kmalloc_trace+0x27/0xa0 [<ffffffff819c11cf>] damon_new_target+0x3f/0x1b0 [<ffffffff819c7d55>] damon_do_test_apply_three_regions.constprop.0+0x95/0x3e0 [<ffffffff819c851e>] damon_test_apply_three_regions2+0x21e/0x260 [<ffffffff829fce6a>] kunit_generic_run_threadfn_adapter+0x4a/0x90 [<ffffffff81237cf6>] kthread+0x2b6/0x380 [<ffffffff81097add>] ret_from_fork+0x2d/0x70 [<ffffffff81003791>] ret_from_fork_asm+0x11/0x20 unreferenced object 0xffff8881079ccc80 (size 56): comm "kunit_try_catch", pid 1071, jiffies 4294670595 (age 732.843s) hex dump (first 32 bytes): 05 00 00 00 00 00 00 00 14 00 00 00 00 00 00 00 ................ 6b 6b 6b 6b 6b 6b 6b 6b 00 00 00 00 6b 6b 6b 6b kkkkkkkk....kkkk backtrace: [<ffffffff819bc492>] damon_new_region+0x22/0x1c0 [<ffffffff819c7d91>] damon_do_test_apply_three_regions.constprop.0+0xd1/0x3e0 [<ffffffff819c851e>] damon_test_apply_three_regions2+0x21e/0x260 [<ffffffff829fce6a>] kunit_generic_run_threadfn_adapter+0x4a/0x90 [<ffffffff81237cf6>] kthread+0x2b6/0x380 [<ffffffff81097add>] ret_from_fork+0x2d/0x70 [<ffff ---truncated---

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix memory leak in parse_lease_state() The previous patch that added bounds check for create lease context introduced a memory leak. When the bounds check fails, the function returns NULL without freeing the previously allocated lease_ctx_info structure. This patch fixes the issue by adding kfree(lreq) before returning NULL in both boundary check cases.

In the Linux kernel, the following vulnerability has been resolved: espintcp: fix skb leaks A few error paths are missing a kfree_skb.

In the Linux kernel, the following vulnerability has been resolved: net: fix udp gso skb_segment after pull from frag_list Commit a1e40ac5b5e9 ("net: gso: fix udp gso fraglist segmentation after pull from frag_list") detected invalid geometry in frag_list skbs and redirects them from skb_segment_list to more robust skb_segment. But some packets with modified geometry can also hit bugs in that code. We don't know how many such cases exist. Addressing each one by one also requires touching the complex skb_segment code, which risks introducing bugs for other types of skbs. Instead, linearize all these packets that fail the basic invariants on gso fraglist skbs. That is more robust. If only part of the fraglist payload is pulled into head_skb, it will always cause exception when splitting skbs by skb_segment. For detailed call stack information, see below. Valid SKB_GSO_FRAGLIST skbs - consist of two or more segments - the head_skb holds the protocol headers plus first gso_size - one or more frag_list skbs hold exactly one segment - all but the last must be gso_size Optional datapath hooks such as NAT and BPF (bpf_skb_pull_data) can modify fraglist skbs, breaking these invariants. In extreme cases they pull one part of data into skb linear. For UDP, this causes three payloads with lengths of (11,11,10) bytes were pulled tail to become (12,10,10) bytes. The skbs no longer meets the above SKB_GSO_FRAGLIST conditions because payload was pulled into head_skb, it needs to be linearized before pass to regular skb_segment. skb_segment+0xcd0/0xd14 __udp_gso_segment+0x334/0x5f4 udp4_ufo_fragment+0x118/0x15c inet_gso_segment+0x164/0x338 skb_mac_gso_segment+0xc4/0x13c __skb_gso_segment+0xc4/0x124 validate_xmit_skb+0x9c/0x2c0 validate_xmit_skb_list+0x4c/0x80 sch_direct_xmit+0x70/0x404 __dev_queue_xmit+0x64c/0xe5c neigh_resolve_output+0x178/0x1c4 ip_finish_output2+0x37c/0x47c __ip_finish_output+0x194/0x240 ip_finish_output+0x20/0xf4 ip_output+0x100/0x1a0 NF_HOOK+0xc4/0x16c ip_forward+0x314/0x32c ip_rcv+0x90/0x118 __netif_receive_skb+0x74/0x124 process_backlog+0xe8/0x1a4 __napi_poll+0x5c/0x1f8 net_rx_action+0x154/0x314 handle_softirqs+0x154/0x4b8 [118.376811] [C201134] rxq0_pus: [name:bug&]kernel BUG at net/core/skbuff.c:4278! [118.376829] [C201134] rxq0_pus: [name:traps&]Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP [118.470774] [C201134] rxq0_pus: [name:mrdump&]Kernel Offset: 0x178cc00000 from 0xffffffc008000000 [118.470810] [C201134] rxq0_pus: [name:mrdump&]PHYS_OFFSET: 0x40000000 [118.470827] [C201134] rxq0_pus: [name:mrdump&]pstate: 60400005 (nZCv daif +PAN -UAO) [118.470848] [C201134] rxq0_pus: [name:mrdump&]pc : [0xffffffd79598aefc] skb_segment+0xcd0/0xd14 [118.470900] [C201134] rxq0_pus: [name:mrdump&]lr : [0xffffffd79598a5e8] skb_segment+0x3bc/0xd14 [118.470928] [C201134] rxq0_pus: [name:mrdump&]sp : ffffffc008013770

In the Linux kernel, the following vulnerability has been resolved: crypto: sun8i-ce-cipher - fix error handling in sun8i_ce_cipher_prepare() Fix two DMA cleanup issues on the error path in sun8i_ce_cipher_prepare(): 1] If dma_map_sg() fails for areq->dst, the device driver would try to free DMA memory it has not allocated in the first place. To fix this, on the "theend_sgs" error path, call dma unmap only if the corresponding dma map was successful. 2] If the dma_map_single() call for the IV fails, the device driver would try to free an invalid DMA memory address on the "theend_iv" path: ------------[ cut here ]------------ DMA-API: sun8i-ce 1904000.crypto: device driver tries to free an invalid DMA memory address WARNING: CPU: 2 PID: 69 at kernel/dma/debug.c:968 check_unmap+0x123c/0x1b90 Modules linked in: skcipher_example(O+) CPU: 2 UID: 0 PID: 69 Comm: 1904000.crypto- Tainted: G O 6.15.0-rc3+ #24 PREEMPT Tainted: [O]=OOT_MODULE Hardware name: OrangePi Zero2 (DT) pc : check_unmap+0x123c/0x1b90 lr : check_unmap+0x123c/0x1b90 ... Call trace: check_unmap+0x123c/0x1b90 (P) debug_dma_unmap_page+0xac/0xc0 dma_unmap_page_attrs+0x1f4/0x5fc sun8i_ce_cipher_do_one+0x1bd4/0x1f40 crypto_pump_work+0x334/0x6e0 kthread_worker_fn+0x21c/0x438 kthread+0x374/0x664 ret_from_fork+0x10/0x20 ---[ end trace 0000000000000000 ]--- To fix this, check for !dma_mapping_error() before calling dma_unmap_single() on the "theend_iv" path.

In the Linux kernel, the following vulnerability has been resolved: soc: brcmstb: pm-arm: Fix refcount leak and __iomem leak bugs In brcmstb_pm_probe(), there are two kinds of leak bugs: (1) we need to add of_node_put() when for_each__matching_node() breaks (2) we need to add iounmap() for each iomap in fail path

In the Linux kernel, the following vulnerability has been resolved: atm: atmtcp: Free invalid length skb in atmtcp_c_send(). syzbot reported the splat below. [0] vcc_sendmsg() copies data passed from userspace to skb and passes it to vcc->dev->ops->send(). atmtcp_c_send() accesses skb->data as struct atmtcp_hdr after checking if skb->len is 0, but it's not enough. Also, when skb->len == 0, skb and sk (vcc) were leaked because dev_kfree_skb() is not called and sk_wmem_alloc adjustment is missing to revert atm_account_tx() in vcc_sendmsg(), which is expected to be done in atm_pop_raw(). Let's properly free skb with an invalid length in atmtcp_c_send(). [0]: BUG: KMSAN: uninit-value in atmtcp_c_send+0x255/0xed0 drivers/atm/atmtcp.c:294 atmtcp_c_send+0x255/0xed0 drivers/atm/atmtcp.c:294 vcc_sendmsg+0xd7c/0xff0 net/atm/common.c:644 sock_sendmsg_nosec net/socket.c:712 [inline] __sock_sendmsg+0x330/0x3d0 net/socket.c:727 ____sys_sendmsg+0x7e0/0xd80 net/socket.c:2566 ___sys_sendmsg+0x271/0x3b0 net/socket.c:2620 __sys_sendmsg net/socket.c:2652 [inline] __do_sys_sendmsg net/socket.c:2657 [inline] __se_sys_sendmsg net/socket.c:2655 [inline] __x64_sys_sendmsg+0x211/0x3e0 net/socket.c:2655 x64_sys_call+0x32fb/0x3db0 arch/x86/include/generated/asm/syscalls_64.h:47 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xd9/0x210 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was created at: slab_post_alloc_hook mm/slub.c:4154 [inline] slab_alloc_node mm/slub.c:4197 [inline] kmem_cache_alloc_node_noprof+0x818/0xf00 mm/slub.c:4249 kmalloc_reserve+0x13c/0x4b0 net/core/skbuff.c:579 __alloc_skb+0x347/0x7d0 net/core/skbuff.c:670 alloc_skb include/linux/skbuff.h:1336 [inline] vcc_sendmsg+0xb40/0xff0 net/atm/common.c:628 sock_sendmsg_nosec net/socket.c:712 [inline] __sock_sendmsg+0x330/0x3d0 net/socket.c:727 ____sys_sendmsg+0x7e0/0xd80 net/socket.c:2566 ___sys_sendmsg+0x271/0x3b0 net/socket.c:2620 __sys_sendmsg net/socket.c:2652 [inline] __do_sys_sendmsg net/socket.c:2657 [inline] __se_sys_sendmsg net/socket.c:2655 [inline] __x64_sys_sendmsg+0x211/0x3e0 net/socket.c:2655 x64_sys_call+0x32fb/0x3db0 arch/x86/include/generated/asm/syscalls_64.h:47 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xd9/0x210 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f CPU: 1 UID: 0 PID: 5798 Comm: syz-executor192 Not tainted 6.16.0-rc1-syzkaller-00010-g2c4a1f3fe03e #0 PREEMPT(undef) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025

In the Linux kernel, the following vulnerability has been resolved: media: pvrusb2: fix URB leak in pvr2_send_request_ex When pvr2_send_request_ex() submits a write URB successfully but fails to submit the read URB (e.g. returns -ENOMEM), it returns immediately without waiting for the write URB to complete. Since the driver reuses the same URB structure, a subsequent call to pvr2_send_request_ex() attempts to submit the still-active write URB, triggering a 'URB submitted while active' warning in usb_submit_urb(). Fix this by ensuring the write URB is unlinked and waited upon if the read URB submission fails.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: Fix memory leak due to multiple rx_stats allocation rx_stats for each arsta is allocated when adding a station. arsta->rx_stats will be freed when a station is removed. Redundant allocations are occurring when the same station is added multiple times. This causes ath12k_mac_station_add() to be called multiple times, and rx_stats is allocated each time. As a result there is memory leaks. Prevent multiple allocations of rx_stats when ath12k_mac_station_add() is called repeatedly by checking if rx_stats is already allocated before allocating again. Allocate arsta->rx_stats if arsta->rx_stats is NULL respectively. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: fix leaks when hci_cmd_sync_queue_once fails When hci_cmd_sync_queue_once() returns with error, the destroy callback will not be called. Fix leaking references / memory on these failures.

In the Linux kernel, the following vulnerability has been resolved: drm/nouveau/nvif: Fix potential memory leak in nvif_vmm_ctor(). When the nvif_vmm_type is invalid, we will return error directly without freeing the args in nvif_vmm_ctor(), which leading a memory leak. Fix it by setting the ret -EINVAL and goto done.

In the Linux kernel, the following vulnerability has been resolved: gfs2: fiemap page fault fix In gfs2_fiemap(), we are calling iomap_fiemap() while holding the inode glock. This can lead to recursive glock taking if the fiemap buffer is memory mapped to the same inode and accessing it triggers a page fault. Fix by disabling page faults for iomap_fiemap() and faulting in the buffer by hand if necessary. Fixes xfstest generic/742.

In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix memory leak on failure path cfg80211_inform_bss_frame() may return NULL on failure. In that case, the allocated buffer 'buf' is not freed and the function returns early, leading to potential memory leak. Fix this by ensuring that 'buf' is freed on both success and failure paths.

In the Linux kernel, the following vulnerability has been resolved: media: radio-keene: fix memory leak in error path Fix a memory leak in usb_keene_probe(). The v4l2 control handler is initialized and controls are added, but if v4l2_device_register() or video_register_device() fails afterward, the handler was never freed, leaking memory. Add v4l2_ctrl_handler_free() call in the err_v4l2 error path to ensure the control handler is properly freed for all error paths after it is initialized.

In the Linux kernel, the following vulnerability has been resolved: net: qrtr: replace qrtr_tx_flow radix_tree with xarray to fix memory leak __radix_tree_create() allocates and links intermediate nodes into the tree one by one. If a subsequent allocation fails, the already-linked nodes remain in the tree with no corresponding leaf entry. These orphaned internal nodes are never reclaimed because radix_tree_for_each_slot() only visits slots containing leaf values. The radix_tree API is deprecated in favor of xarray. As suggested by Matthew Wilcox, migrate qrtr_tx_flow from radix_tree to xarray instead of fixing the radix_tree itself [1]. xarray properly handles cleanup of internal nodes — xa_destroy() frees all internal xarray nodes when the qrtr_node is released, preventing the leak. [1] https://lore.kernel.org/all/20260225071623.41275-1-jiayuan.chen@linux.dev/T/

In the Linux kernel, the following vulnerability has been resolved: drm/atmel-hlcdc: fix memory leak from the atomic_destroy_state callback After several commits, the slab memory increases. Some drm_crtc_commit objects are not freed. The atomic_destroy_state callback only put the framebuffer. Use the __drm_atomic_helper_plane_destroy_state() function to put all the objects that are no longer needed. It has been seen after hours of usage of a graphics application or using kmemleak: unreferenced object 0xc63a6580 (size 64): comm "egt_basic", pid 171, jiffies 4294940784 hex dump (first 32 bytes): 40 50 34 c5 01 00 00 00 ff ff ff ff 8c 65 3a c6 @P4..........e:. 8c 65 3a c6 ff ff ff ff 98 65 3a c6 98 65 3a c6 .e:......e:..e:. backtrace (crc c25aa925): kmemleak_alloc+0x34/0x3c __kmalloc_cache_noprof+0x150/0x1a4 drm_atomic_helper_setup_commit+0x1e8/0x7bc drm_atomic_helper_commit+0x3c/0x15c drm_atomic_commit+0xc0/0xf4 drm_atomic_helper_set_config+0x84/0xb8 drm_mode_setcrtc+0x32c/0x810 drm_ioctl+0x20c/0x488 sys_ioctl+0x14c/0xc20 ret_fast_syscall+0x0/0x54

In the Linux kernel, the following vulnerability has been resolved: drm/msm: Fix a fence leak in submit error path In error paths, we could unref the submit without calling drm_sched_entity_push_job(), so msm_job_free() will never get called. Since drm_sched_job_cleanup() will NULL out the s_fence, we can use that to detect this case. Patchwork: https://patchwork.freedesktop.org/patch/653584/

In the Linux kernel, the following vulnerability has been resolved: ACPICA: fix acpi operand cache leak in dswstate.c ACPICA commit 987a3b5cf7175916e2a4b6ea5b8e70f830dfe732 I found an ACPI cache leak in ACPI early termination and boot continuing case. When early termination occurs due to malicious ACPI table, Linux kernel terminates ACPI function and continues to boot process. While kernel terminates ACPI function, kmem_cache_destroy() reports Acpi-Operand cache leak. Boot log of ACPI operand cache leak is as follows: >[ 0.585957] ACPI: Added _OSI(Module Device) >[ 0.587218] ACPI: Added _OSI(Processor Device) >[ 0.588530] ACPI: Added _OSI(3.0 _SCP Extensions) >[ 0.589790] ACPI: Added _OSI(Processor Aggregator Device) >[ 0.591534] ACPI Error: Illegal I/O port address/length above 64K: C806E00000004002/0x2 (20170303/hwvalid-155) >[ 0.594351] ACPI Exception: AE_LIMIT, Unable to initialize fixed events (20170303/evevent-88) >[ 0.597858] ACPI: Unable to start the ACPI Interpreter >[ 0.599162] ACPI Error: Could not remove SCI handler (20170303/evmisc-281) >[ 0.601836] kmem_cache_destroy Acpi-Operand: Slab cache still has objects >[ 0.603556] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.12.0-rc5 #26 >[ 0.605159] Hardware name: innotek gmb_h virtual_box/virtual_box, BIOS virtual_box 12/01/2006 >[ 0.609177] Call Trace: >[ 0.610063] ? dump_stack+0x5c/0x81 >[ 0.611118] ? kmem_cache_destroy+0x1aa/0x1c0 >[ 0.612632] ? acpi_sleep_proc_init+0x27/0x27 >[ 0.613906] ? acpi_os_delete_cache+0xa/0x10 >[ 0.617986] ? acpi_ut_delete_caches+0x3f/0x7b >[ 0.619293] ? acpi_terminate+0xa/0x14 >[ 0.620394] ? acpi_init+0x2af/0x34f >[ 0.621616] ? __class_create+0x4c/0x80 >[ 0.623412] ? video_setup+0x7f/0x7f >[ 0.624585] ? acpi_sleep_proc_init+0x27/0x27 >[ 0.625861] ? do_one_initcall+0x4e/0x1a0 >[ 0.627513] ? kernel_init_freeable+0x19e/0x21f >[ 0.628972] ? rest_init+0x80/0x80 >[ 0.630043] ? kernel_init+0xa/0x100 >[ 0.631084] ? ret_from_fork+0x25/0x30 >[ 0.633343] vgaarb: loaded >[ 0.635036] EDAC MC: Ver: 3.0.0 >[ 0.638601] PCI: Probing PCI hardware >[ 0.639833] PCI host bridge to bus 0000:00 >[ 0.641031] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] > ... Continue to boot and log is omitted ... I analyzed this memory leak in detail and found acpi_ds_obj_stack_pop_and_ delete() function miscalculated the top of the stack. acpi_ds_obj_stack_push() function uses walk_state->operand_index for start position of the top, but acpi_ds_obj_stack_pop_and_delete() function considers index 0 for it. Therefore, this causes acpi operand memory leak. This cache leak causes a security threat because an old kernel (<= 4.9) shows memory locations of kernel functions in stack dump. Some malicious users could use this information to neutralize kernel ASLR. I made a patch to fix ACPI operand cache leak.

In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: Intel: hda: Use devm_kstrdup() to avoid memleak. sof_pdata->tplg_filename can have address allocated by kstrdup() and can be overwritten. Memory leak was detected with kmemleak: unreferenced object 0xffff88812391ff60 (size 16): comm "kworker/4:1", pid 161, jiffies 4294802931 hex dump (first 16 bytes): 73 6f 66 2d 68 64 61 2d 67 65 6e 65 72 69 63 00 sof-hda-generic. backtrace (crc 4bf1675c): __kmalloc_node_track_caller_noprof+0x49c/0x6b0 kstrdup+0x46/0xc0 hda_machine_select.cold+0x1de/0x12cf [snd_sof_intel_hda_generic] sof_init_environment+0x16f/0xb50 [snd_sof] sof_probe_continue+0x45/0x7c0 [snd_sof] sof_probe_work+0x1e/0x40 [snd_sof] process_one_work+0x894/0x14b0 worker_thread+0x5e5/0xfb0 kthread+0x39d/0x760 ret_from_fork+0x31/0x70 ret_from_fork_asm+0x1a/0x30

In the Linux kernel, the following vulnerability has been resolved: efivarfs: Fix memory leak of efivarfs_fs_info in fs_context error paths When processing mount options, efivarfs allocates efivarfs_fs_info (sfi) early in fs_context initialization. However, sfi is associated with the superblock and typically freed when the superblock is destroyed. If the fs_context is released (final put) before fill_super is called—such as on error paths or during reconfiguration—the sfi structure would leak, as ownership never transfers to the superblock. Implement the .free callback in efivarfs_context_ops to ensure any allocated sfi is properly freed if the fs_context is torn down before fill_super, preventing this memory leak.

In the Linux kernel, the following vulnerability has been resolved: remoteproc: core: Cleanup acquired resources when rproc_handle_resources() fails in rproc_attach() When rproc->state = RPROC_DETACHED and rproc_attach() is used to attach to the remote processor, if rproc_handle_resources() returns a failure, the resources allocated by imx_rproc_prepare() should be released, otherwise the following memory leak will occur. Since almost the same thing is done in imx_rproc_prepare() and rproc_resource_cleanup(), Function rproc_resource_cleanup() is able to deal with empty lists so it is better to fix the "goto" statements in rproc_attach(). replace the "unprepare_device" goto statement with "clean_up_resources" and get rid of the "unprepare_device" label. unreferenced object 0xffff0000861c5d00 (size 128): comm "kworker/u12:3", pid 59, jiffies 4294893509 (age 149.220s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 02 88 00 00 00 00 00 00 10 00 00 00 00 00 ............ backtrace: [<00000000f949fe18>] slab_post_alloc_hook+0x98/0x37c [<00000000adbfb3e7>] __kmem_cache_alloc_node+0x138/0x2e0 [<00000000521c0345>] kmalloc_trace+0x40/0x158 [<000000004e330a49>] rproc_mem_entry_init+0x60/0xf8 [<000000002815755e>] imx_rproc_prepare+0xe0/0x180 [<0000000003f61b4e>] rproc_boot+0x2ec/0x528 [<00000000e7e994ac>] rproc_add+0x124/0x17c [<0000000048594076>] imx_rproc_probe+0x4ec/0x5d4 [<00000000efc298a1>] platform_probe+0x68/0xd8 [<00000000110be6fe>] really_probe+0x110/0x27c [<00000000e245c0ae>] __driver_probe_device+0x78/0x12c [<00000000f61f6f5e>] driver_probe_device+0x3c/0x118 [<00000000a7874938>] __device_attach_driver+0xb8/0xf8 [<0000000065319e69>] bus_for_each_drv+0x84/0xe4 [<00000000db3eb243>] __device_attach+0xfc/0x18c [<0000000072e4e1a4>] device_initial_probe+0x14/0x20

In the Linux kernel, the following vulnerability has been resolved: net: ethernet: ti: am65-cpsw-nuss: Fix skb size by accounting for skb_shared_info While transitioning from netdev_alloc_ip_align() to build_skb(), memory for the "skb_shared_info" member of an "skb" was not allocated. Fix this by allocating "PAGE_SIZE" as the skb length, accounting for the packet length, headroom and tailroom, thereby including the required memory space for skb_shared_info.

In the Linux kernel, the following vulnerability has been resolved: video: screen_info: Relocate framebuffers behind PCI bridges Apply PCI host-bridge window offsets to screen_info framebuffers. Fixes invalid access to I/O memory. Resources behind a PCI host bridge can be relocated by a certain offset in the kernel's CPU address range used for I/O. The framebuffer memory range stored in screen_info refers to the CPU addresses as seen during boot (where the offset is 0). During boot up, firmware may assign a different memory offset to the PCI host bridge and thereby relocating the framebuffer address of the PCI graphics device as seen by the kernel. The information in screen_info must be updated as well. The helper pcibios_bus_to_resource() performs the relocation of the screen_info's framebuffer resource (given in PCI bus addresses). The result matches the I/O-memory resource of the PCI graphics device (given in CPU addresses). As before, we store away the information necessary to later update the information in screen_info itself. Commit 78aa89d1dfba ("firmware/sysfb: Update screen_info for relocated EFI framebuffers") added the code for updating screen_info. It is based on similar functionality that pre-existed in efifb. Efifb uses a pointer to the PCI resource, while the newer code does a memcpy of the region. Hence efifb sees any updates to the PCI resource and avoids the issue. v3: - Only use struct pci_bus_region for PCI bus addresses (Bjorn) - Clarify address semantics in commit messages and comments (Bjorn) v2: - Fixed tags (Takashi, Ivan) - Updated information on efifb

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Remove skb secpath if xfrm state is not found Hardware returns a unique identifier for a decrypted packet's xfrm state, this state is looked up in an xarray. However, the state might have been freed by the time of this lookup. Currently, if the state is not found, only a counter is incremented. The secpath (sp) extension on the skb is not removed, resulting in sp->len becoming 0. Subsequently, functions like __xfrm_policy_check() attempt to access fields such as xfrm_input_state(skb)->xso.type (which dereferences sp->xvec[sp->len - 1]) without first validating sp->len. This leads to a crash when dereferencing an invalid state pointer. This patch prevents the crash by explicitly removing the secpath extension from the skb if the xfrm state is not found after hardware decryption. This ensures downstream functions do not operate on a zero-length secpath. BUG: unable to handle page fault for address: ffffffff000002c8 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 282e067 P4D 282e067 PUD 0 Oops: Oops: 0000 [#1] SMP CPU: 12 UID: 0 PID: 0 Comm: swapper/12 Not tainted 6.15.0-rc7_for_upstream_min_debug_2025_05_27_22_44 #1 NONE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:__xfrm_policy_check+0x61a/0xa30 Code: b6 77 7f 83 e6 02 74 14 4d 8b af d8 00 00 00 41 0f b6 45 05 c1 e0 03 48 98 49 01 c5 41 8b 45 00 83 e8 01 48 98 49 8b 44 c5 10 <0f> b6 80 c8 02 00 00 83 e0 0c 3c 04 0f 84 0c 02 00 00 31 ff 80 fa RSP: 0018:ffff88885fb04918 EFLAGS: 00010297 RAX: ffffffff00000000 RBX: 0000000000000002 RCX: 0000000000000000 RDX: 0000000000000002 RSI: 0000000000000002 RDI: 0000000000000000 RBP: ffffffff8311af80 R08: 0000000000000020 R09: 00000000c2eda353 R10: ffff88812be2bbc8 R11: 000000001faab533 R12: ffff88885fb049c8 R13: ffff88812be2bbc8 R14: 0000000000000000 R15: ffff88811896ae00 FS: 0000000000000000(0000) GS:ffff8888dca82000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffff000002c8 CR3: 0000000243050002 CR4: 0000000000372eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> ? try_to_wake_up+0x108/0x4c0 ? udp4_lib_lookup2+0xbe/0x150 ? udp_lib_lport_inuse+0x100/0x100 ? __udp4_lib_lookup+0x2b0/0x410 __xfrm_policy_check2.constprop.0+0x11e/0x130 udp_queue_rcv_one_skb+0x1d/0x530 udp_unicast_rcv_skb+0x76/0x90 __udp4_lib_rcv+0xa64/0xe90 ip_protocol_deliver_rcu+0x20/0x130 ip_local_deliver_finish+0x75/0xa0 ip_local_deliver+0xc1/0xd0 ? ip_protocol_deliver_rcu+0x130/0x130 ip_sublist_rcv+0x1f9/0x240 ? ip_rcv_finish_core+0x430/0x430 ip_list_rcv+0xfc/0x130 __netif_receive_skb_list_core+0x181/0x1e0 netif_receive_skb_list_internal+0x200/0x360 ? mlx5e_build_rx_skb+0x1bc/0xda0 [mlx5_core] gro_receive_skb+0xfd/0x210 mlx5e_handle_rx_cqe_mpwrq+0x141/0x280 [mlx5_core] mlx5e_poll_rx_cq+0xcc/0x8e0 [mlx5_core] ? mlx5e_handle_rx_dim+0x91/0xd0 [mlx5_core] mlx5e_napi_poll+0x114/0xab0 [mlx5_core] __napi_poll+0x25/0x170 net_rx_action+0x32d/0x3a0 ? mlx5_eq_comp_int+0x8d/0x280 [mlx5_core] ? notifier_call_chain+0x33/0xa0 handle_softirqs+0xda/0x250 irq_exit_rcu+0x6d/0xc0 common_interrupt+0x81/0xa0 </IRQ>

In the Linux kernel, the following vulnerability has been resolved: net: ngbe: fix memory leak in ngbe_probe() error path When ngbe_sw_init() is called, memory is allocated for wx->rss_key in wx_init_rss_key(). However, in ngbe_probe() function, the subsequent error paths after ngbe_sw_init() don't free the rss_key. Fix that by freeing it in error path along with wx->mac_table. Also change the label to which execution jumps when ngbe_sw_init() fails, because otherwise, it could lead to a double free for rss_key, when the mac_table allocation fails in wx_sw_init().

In the Linux kernel, the following vulnerability has been resolved: tipc: fix memory leak in tipc_link_xmit In case the backlog transmit queue for system-importance messages is overloaded, tipc_link_xmit() returns -ENOBUFS but the skb list is not purged. This leads to memory leak and failure when a skb is allocated. This commit fixes this issue by purging the skb list before tipc_link_xmit() returns.

In the Linux kernel, the following vulnerability has been resolved: virtio-net: free xsk_buffs on error in virtnet_xsk_pool_enable() The selftests added to our CI by Bui Quang Minh recently reveals that there is a mem leak on the error path of virtnet_xsk_pool_enable(): unreferenced object 0xffff88800a68a000 (size 2048): comm "xdp_helper", pid 318, jiffies 4294692778 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc 0): __kvmalloc_node_noprof+0x402/0x570 virtnet_xsk_pool_enable+0x293/0x6a0 (drivers/net/virtio_net.c:5882) xp_assign_dev+0x369/0x670 (net/xdp/xsk_buff_pool.c:226) xsk_bind+0x6a5/0x1ae0 __sys_bind+0x15e/0x230 __x64_sys_bind+0x72/0xb0 do_syscall_64+0xc1/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f

In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix memory leak in ath12k_pci_remove() Kmemleak reported this error: unreferenced object 0xffff1c165cec3060 (size 32): comm "insmod", pid 560, jiffies 4296964570 (age 235.596s) backtrace: [<000000005434db68>] __kmem_cache_alloc_node+0x1f4/0x2c0 [<000000001203b155>] kmalloc_trace+0x40/0x88 [<0000000028adc9c8>] _request_firmware+0xb8/0x608 [<00000000cad1aef7>] firmware_request_nowarn+0x50/0x80 [<000000005011a682>] local_pci_probe+0x48/0xd0 [<00000000077cd295>] pci_device_probe+0xb4/0x200 [<0000000087184c94>] really_probe+0x150/0x2c0 The firmware memory was allocated in ath12k_pci_probe(), but not freed in ath12k_pci_remove() in case ATH12K_FLAG_QMI_FAIL bit is set. So call ath12k_fw_unmap() to free the memory. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.2.0-02280-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: csa unmap use uninterruptible lock After process exit to unmap csa and free GPU vm, if signal is accepted and then waiting to take vm lock is interrupted and return, it causes memory leaking and below warning backtrace. Change to use uninterruptible wait lock fix the issue. WARNING: CPU: 69 PID: 167800 at amd/amdgpu/amdgpu_kms.c:1525 amdgpu_driver_postclose_kms+0x294/0x2a0 [amdgpu] Call Trace: <TASK> drm_file_free.part.0+0x1da/0x230 [drm] drm_close_helper.isra.0+0x65/0x70 [drm] drm_release+0x6a/0x120 [drm] amdgpu_drm_release+0x51/0x60 [amdgpu] __fput+0x9f/0x280 ____fput+0xe/0x20 task_work_run+0x67/0xa0 do_exit+0x217/0x3c0 do_group_exit+0x3b/0xb0 get_signal+0x14a/0x8d0 arch_do_signal_or_restart+0xde/0x100 exit_to_user_mode_loop+0xc1/0x1a0 exit_to_user_mode_prepare+0xf4/0x100 syscall_exit_to_user_mode+0x17/0x40 do_syscall_64+0x69/0xc0 (cherry picked from commit 7dbbfb3c171a6f63b01165958629c9c26abf38ab)

In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: wcd937x: fix a potential memory leak in wcd937x_soc_codec_probe() When snd_soc_dapm_new_controls() or snd_soc_dapm_add_routes() fails, wcd937x_soc_codec_probe() returns without releasing 'wcd937x->clsh_info', which is allocated by wcd_clsh_ctrl_alloc. Add wcd_clsh_ctrl_free() to prevent potential memory leak.

In the Linux kernel, the following vulnerability has been resolved: qibfs: fix _another_ leak failure to allocate inode => leaked dentry... this one had been there since the initial merge; to be fair, if we are that far OOM, the odds of failing at that particular allocation are low...

In the Linux kernel, the following vulnerability has been resolved: net: phy: mscc: Fix memory leak when using one step timestamping Fix memory leak when running one-step timestamping. When running one-step sync timestamping, the HW is configured to insert the TX time into the frame, so there is no reason to keep the skb anymore. As in this case the HW will never generate an interrupt to say that the frame was timestamped, then the frame will never released. Fix this by freeing the frame in case of one-step timestamping.

In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Add job to pending list if the reset was skipped When a CL/CSD job times out, we check if the GPU has made any progress since the last timeout. If so, instead of resetting the hardware, we skip the reset and let the timer get rearmed. This gives long-running jobs a chance to complete. However, when `timedout_job()` is called, the job in question is removed from the pending list, which means it won't be automatically freed through `free_job()`. Consequently, when we skip the reset and keep the job running, the job won't be freed when it finally completes. This situation leads to a memory leak, as exposed in [1] and [2]. Similarly to commit 704d3d60fec4 ("drm/etnaviv: don't block scheduler when GPU is still active"), this patch ensures the job is put back on the pending list when extending the timeout.

In the Linux kernel, the following vulnerability has been resolved: cxgb4: fix memory leak in cxgb4_init_ethtool_filters() error path In the for loop used to allocate the loc_array and bmap for each port, a memory leak is possible when the allocation for loc_array succeeds, but the allocation for bmap fails. This is because when the control flow goes to the label free_eth_finfo, only the allocations starting from (i-1)th iteration are freed. Fix that by freeing the loc_array in the bmap allocation error path.

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix the inode leak in btrfs_iget() [BUG] There is a bug report that a syzbot reproducer can lead to the following busy inode at unmount time: BTRFS info (device loop1): last unmount of filesystem 1680000e-3c1e-4c46-84b6-56bd3909af50 VFS: Busy inodes after unmount of loop1 (btrfs) ------------[ cut here ]------------ kernel BUG at fs/super.c:650! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI CPU: 0 UID: 0 PID: 48168 Comm: syz-executor Not tainted 6.15.0-rc2-00471-g119009db2674 #2 PREEMPT(full) Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:generic_shutdown_super+0x2e9/0x390 fs/super.c:650 Call Trace: <TASK> kill_anon_super+0x3a/0x60 fs/super.c:1237 btrfs_kill_super+0x3b/0x50 fs/btrfs/super.c:2099 deactivate_locked_super+0xbe/0x1a0 fs/super.c:473 deactivate_super fs/super.c:506 [inline] deactivate_super+0xe2/0x100 fs/super.c:502 cleanup_mnt+0x21f/0x440 fs/namespace.c:1435 task_work_run+0x14d/0x240 kernel/task_work.c:227 resume_user_mode_work include/linux/resume_user_mode.h:50 [inline] exit_to_user_mode_loop kernel/entry/common.c:114 [inline] exit_to_user_mode_prepare include/linux/entry-common.h:329 [inline] __syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline] syscall_exit_to_user_mode+0x269/0x290 kernel/entry/common.c:218 do_syscall_64+0xd4/0x250 arch/x86/entry/syscall_64.c:100 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> [CAUSE] When btrfs_alloc_path() failed, btrfs_iget() directly returned without releasing the inode already allocated by btrfs_iget_locked(). This results the above busy inode and trigger the kernel BUG. [FIX] Fix it by calling iget_failed() if btrfs_alloc_path() failed. If we hit error inside btrfs_read_locked_inode(), it will properly call iget_failed(), so nothing to worry about. Although the iget_failed() cleanup inside btrfs_read_locked_inode() is a break of the normal error handling scheme, let's fix the obvious bug and backport first, then rework the error handling later.

In the Linux kernel, the following vulnerability has been resolved: block: fix resource leak in blk_register_queue() error path When registering a queue fails after blk_mq_sysfs_register() is successful but the function later encounters an error, we need to clean up the blk_mq_sysfs resources. Add the missing blk_mq_sysfs_unregister() call in the error path to properly clean up these resources and prevent a memory leak.

In the Linux kernel, the following vulnerability has been resolved: net: lan743x: Fix memleak issue when GSO enabled Always map the `skb` to the LS descriptor. Previously skb was mapped to EXT descriptor when the number of fragments is zero with GSO enabled. Mapping the skb to EXT descriptor prevents it from being freed, leading to a memory leak

In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Balance device refcount when destroying devices Using device_find_child() to lookup the proper SCMI device to destroy causes an unbalance in device refcount, since device_find_child() calls an implicit get_device(): this, in turns, inhibits the call of the provided release methods upon devices destruction. As a consequence, one of the structures that is not freed properly upon destruction is the internal struct device_private dev->p populated by the drivers subsystem core. KMemleak detects this situation since loading/unloding some SCMI driver causes related devices to be created/destroyed without calling any device_release method. unreferenced object 0xffff00000f583800 (size 512): comm "insmod", pid 227, jiffies 4294912190 hex dump (first 32 bytes): 00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00 .....N.......... ff ff ff ff ff ff ff ff 60 36 1d 8a 00 80 ff ff ........`6...... backtrace (crc 114e2eed): kmemleak_alloc+0xbc/0xd8 __kmalloc_cache_noprof+0x2dc/0x398 device_add+0x954/0x12d0 device_register+0x28/0x40 __scmi_device_create.part.0+0x1bc/0x380 scmi_device_create+0x2d0/0x390 scmi_create_protocol_devices+0x74/0xf8 scmi_device_request_notifier+0x1f8/0x2a8 notifier_call_chain+0x110/0x3b0 blocking_notifier_call_chain+0x70/0xb0 scmi_driver_register+0x350/0x7f0 0xffff80000a3b3038 do_one_initcall+0x12c/0x730 do_init_module+0x1dc/0x640 load_module+0x4b20/0x5b70 init_module_from_file+0xec/0x158 $ ./scripts/faddr2line ./vmlinux device_add+0x954/0x12d0 device_add+0x954/0x12d0: kmalloc_noprof at include/linux/slab.h:901 (inlined by) kzalloc_noprof at include/linux/slab.h:1037 (inlined by) device_private_init at drivers/base/core.c:3510 (inlined by) device_add at drivers/base/core.c:3561 Balance device refcount by issuing a put_device() on devices found via device_find_child().

In the Linux kernel, the following vulnerability has been resolved: net: phy: leds: fix memory leak A network restart test on a router led to an out-of-memory condition, which was traced to a memory leak in the PHY LED trigger code. The root cause is misuse of the devm API. The registration function (phy_led_triggers_register) is called from phy_attach_direct, not phy_probe, and the unregister function (phy_led_triggers_unregister) is called from phy_detach, not phy_remove. This means the register and unregister functions can be called multiple times for the same PHY device, but devm-allocated memory is not freed until the driver is unbound. This also prevents kmemleak from detecting the leak, as the devm API internally stores the allocated pointer. Fix this by replacing devm_kzalloc/devm_kcalloc with standard kzalloc/kcalloc, and add the corresponding kfree calls in the unregister path.

In the Linux kernel, the following vulnerability has been resolved: staging: r8188eu: fix a memory leak in rtw_wx_read32() Free "ptmp" before returning -EINVAL.

In the Linux kernel, the following vulnerability has been resolved: wifi: wl1251: fix memory leak in wl1251_tx_work The skb dequeued from tx_queue is lost when wl1251_ps_elp_wakeup fails with a -ETIMEDOUT error. Fix that by queueing the skb back to tx_queue.

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix kmemleak warning for percpu hashmap Vlad Poenaru reported the following kmemleak issue: unreferenced object 0x606fd7c44ac8 (size 32): backtrace (crc 0): pcpu_alloc_noprof+0x730/0xeb0 bpf_map_alloc_percpu+0x69/0xc0 prealloc_init+0x9d/0x1b0 htab_map_alloc+0x363/0x510 map_create+0x215/0x3a0 __sys_bpf+0x16b/0x3e0 __x64_sys_bpf+0x18/0x20 do_syscall_64+0x7b/0x150 entry_SYSCALL_64_after_hwframe+0x4b/0x53 Further investigation shows the reason is due to not 8-byte aligned store of percpu pointer in htab_elem_set_ptr(): *(void __percpu **)(l->key + key_size) = pptr; Note that the whole htab_elem alignment is 8 (for x86_64). If the key_size is 4, that means pptr is stored in a location which is 4 byte aligned but not 8 byte aligned. In mm/kmemleak.c, scan_block() scans the memory based on 8 byte stride, so it won't detect above pptr, hence reporting the memory leak. In htab_map_alloc(), we already have htab->elem_size = sizeof(struct htab_elem) + round_up(htab->map.key_size, 8); if (percpu) htab->elem_size += sizeof(void *); else htab->elem_size += round_up(htab->map.value_size, 8); So storing pptr with 8-byte alignment won't cause any problem and can fix kmemleak too. The issue can be reproduced with bpf selftest as well: 1. Enable CONFIG_DEBUG_KMEMLEAK config 2. Add a getchar() before skel destroy in test_hash_map() in prog_tests/for_each.c. The purpose is to keep map available so kmemleak can be detected. 3. run './test_progs -t for_each/hash_map &' and a kmemleak should be reported.

In the Linux kernel, the following vulnerability has been resolved: samples/landlock: Fix path_list memory leak Clang static analysis reports this error sandboxer.c:134:8: warning: Potential leak of memory pointed to by 'path_list' ret = 0; ^ path_list is allocated in parse_path() but never freed.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: Avoid memory leak while enabling statistics Driver uses monitor destination rings for extended statistics mode and standalone monitor mode. In extended statistics mode, TLVs are parsed from the buffer received from the monitor destination ring and assigned to the ppdu_info structure to update per-packet statistics. In standalone monitor mode, along with per-packet statistics, the packet data (payload) is captured, and the driver updates per MSDU to mac80211. When the AP interface is enabled, only extended statistics mode is activated. As part of enabling monitor rings for collecting statistics, the driver subscribes to HAL_RX_MPDU_START TLV in the filter configuration. This TLV is received from the monitor destination ring, and kzalloc for the mon_mpdu object occurs, which is not freed, leading to a memory leak. The kzalloc for the mon_mpdu object is only required while enabling the standalone monitor interface. This causes a memory leak while enabling extended statistics mode in the driver. Fix this memory leak by removing the kzalloc for the mon_mpdu object in the HAL_RX_MPDU_START TLV handling. Additionally, remove the standalone monitor mode handlings in the HAL_MON_BUF_ADDR and HAL_RX_MSDU_END TLVs. These TLV tags will be handled properly when enabling standalone monitor mode in the future. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

In the Linux kernel, the following vulnerability has been resolved: drm/imagination: fix firmware memory leaks Free the memory used to hold the results of firmware image processing when the module is unloaded. Fix the related issue of the same memory being leaked if processing of the firmware image fails during module load. Ensure all firmware GEM objects are destroyed if firmware image processing fails. Fixes memory leaks on powervr module unload detected by Kmemleak: unreferenced object 0xffff000042e20000 (size 94208): comm "modprobe", pid 470, jiffies 4295277154 hex dump (first 32 bytes): 02 ae 7f ed bf 45 84 00 3c 5b 1f ed 9f 45 45 05 .....E..<[...EE. d5 4f 5d 14 6c 00 3d 23 30 d0 3a 4a 66 0e 48 c8 .O].l.=#0.:Jf.H. backtrace (crc dd329dec): kmemleak_alloc+0x30/0x40 ___kmalloc_large_node+0x140/0x188 __kmalloc_large_node_noprof+0x2c/0x13c __kmalloc_noprof+0x48/0x4c0 pvr_fw_init+0xaa4/0x1f50 [powervr] unreferenced object 0xffff000042d20000 (size 20480): comm "modprobe", pid 470, jiffies 4295277154 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 09 00 00 00 0b 00 00 00 ................ 00 00 00 00 00 00 00 00 07 00 00 00 08 00 00 00 ................ backtrace (crc 395b02e3): kmemleak_alloc+0x30/0x40 ___kmalloc_large_node+0x140/0x188 __kmalloc_large_node_noprof+0x2c/0x13c __kmalloc_noprof+0x48/0x4c0 pvr_fw_init+0xb0c/0x1f50 [powervr]

In the Linux kernel, the following vulnerability has been resolved: net_sched: sch_sfq: fix a potential crash on gso_skb handling SFQ has an assumption of always being able to queue at least one packet. However, after the blamed commit, sch->q.len can be inflated by packets in sch->gso_skb, and an enqueue() on an empty SFQ qdisc can be followed by an immediate drop. Fix sfq_drop() to properly clear q->tail in this situation. ip netns add lb ip link add dev to-lb type veth peer name in-lb netns lb ethtool -K to-lb tso off # force qdisc to requeue gso_skb ip netns exec lb ethtool -K in-lb gro on # enable NAPI ip link set dev to-lb up ip -netns lb link set dev in-lb up ip addr add dev to-lb 192.168.20.1/24 ip -netns lb addr add dev in-lb 192.168.20.2/24 tc qdisc replace dev to-lb root sfq limit 100 ip netns exec lb netserver netperf -H 192.168.20.2 -l 100 & netperf -H 192.168.20.2 -l 100 & netperf -H 192.168.20.2 -l 100 & netperf -H 192.168.20.2 -l 100 &

In the Linux kernel, the following vulnerability has been resolved: media: ir_toy: free before error exiting Fix leak in error path.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: clean up hook list when offload flags check fails splice back the hook list so nft_chain_release_hook() has a chance to release the hooks. BUG: memory leak unreferenced object 0xffff88810180b100 (size 96): comm "syz-executor133", pid 3619, jiffies 4294945714 (age 12.690s) hex dump (first 32 bytes): 28 64 23 02 81 88 ff ff 28 64 23 02 81 88 ff ff (d#.....(d#..... 90 a8 aa 83 ff ff ff ff 00 00 b5 0f 81 88 ff ff ................ backtrace: [<ffffffff83a8c59b>] kmalloc include/linux/slab.h:600 [inline] [<ffffffff83a8c59b>] nft_netdev_hook_alloc+0x3b/0xc0 net/netfilter/nf_tables_api.c:1901 [<ffffffff83a9239a>] nft_chain_parse_netdev net/netfilter/nf_tables_api.c:1998 [inline] [<ffffffff83a9239a>] nft_chain_parse_hook+0x33a/0x530 net/netfilter/nf_tables_api.c:2073 [<ffffffff83a9b14b>] nf_tables_addchain.constprop.0+0x10b/0x950 net/netfilter/nf_tables_api.c:2218 [<ffffffff83a9c41b>] nf_tables_newchain+0xa8b/0xc60 net/netfilter/nf_tables_api.c:2593 [<ffffffff83a3d6a6>] nfnetlink_rcv_batch+0xa46/0xd20 net/netfilter/nfnetlink.c:517 [<ffffffff83a3db79>] nfnetlink_rcv_skb_batch net/netfilter/nfnetlink.c:638 [inline] [<ffffffff83a3db79>] nfnetlink_rcv+0x1f9/0x220 net/netfilter/nfnetlink.c:656 [<ffffffff83a13b17>] netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] [<ffffffff83a13b17>] netlink_unicast+0x397/0x4c0 net/netlink/af_netlink.c:1345 [<ffffffff83a13fd6>] netlink_sendmsg+0x396/0x710 net/netlink/af_netlink.c:1921 [<ffffffff83865ab6>] sock_sendmsg_nosec net/socket.c:714 [inline] [<ffffffff83865ab6>] sock_sendmsg+0x56/0x80 net/socket.c:734 [<ffffffff8386601c>] ____sys_sendmsg+0x36c/0x390 net/socket.c:2482 [<ffffffff8386a918>] ___sys_sendmsg+0xa8/0x110 net/socket.c:2536 [<ffffffff8386aaa8>] __sys_sendmsg+0x88/0x100 net/socket.c:2565 [<ffffffff845e5955>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<ffffffff845e5955>] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 [<ffffffff84800087>] entry_SYSCALL_64_after_hwframe+0x63/0xcd

In the Linux kernel, the following vulnerability has been resolved: net/smc: fix connection leak There's a potential leak issue under following execution sequence : smc_release smc_connect_work if (sk->sk_state == SMC_INIT) send_clc_confirim tcp_abort(); ... sk.sk_state = SMC_ACTIVE smc_close_active switch(sk->sk_state) { ... case SMC_ACTIVE: smc_close_final() // then wait peer closed Unfortunately, tcp_abort() may discard CLC CONFIRM messages that are still in the tcp send buffer, in which case our connection token cannot be delivered to the server side, which means that we cannot get a passive close message at all. Therefore, it is impossible for the to be disconnected at all. This patch tries a very simple way to avoid this issue, once the state has changed to SMC_ACTIVE after tcp_abort(), we can actively abort the smc connection, considering that the state is SMC_INIT before tcp_abort(), abandoning the complete disconnection process should not cause too much problem. In fact, this problem may exist as long as the CLC CONFIRM message is not received by the server. Whether a timer should be added after smc_close_final() needs to be discussed in the future. But even so, this patch provides a faster release for connection in above case, it should also be valuable.

In the Linux kernel, the following vulnerability has been resolved: KVM: PPC: Fix kvm_arch_vcpu_ioctl vcpu_load leak vcpu_put is not called if the user copy fails. This can result in preempt notifier corruption and crashes, among other issues.