fs/btrfs/volumes.c in the Linux kernel before 5.1 allows a btrfs_verify_dev_extents NULL pointer dereference via a crafted btrfs image because fs_devices->devices is mishandled within find_device, aka CID-09ba3bc9dd15.

In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Fix NULL pointer derefernce in hns_roce_map_mr_sg() ib_map_mr_sg() allows ULPs to specify NULL as the sg_offset argument. The driver needs to check whether it is a NULL pointer before dereferencing it.

In the Linux kernel, the following vulnerability has been resolved: NFSD: Prevent NULL dereference in nfsd4_process_cb_update() @ses is initialized to NULL. If __nfsd4_find_backchannel() finds no available backchannel session, setup_callback_client() will try to dereference @ses and segfault.

relay_open in kernel/relay.c in the Linux kernel through 5.4.1 allows local users to cause a denial of service (such as relay blockage) by triggering a NULL alloc_percpu result.

In the Linux kernel, the following vulnerability has been resolved: phy: realtek: usb: fix NULL deref in rtk_usb2phy_probe In rtk_usb2phy_probe() devm_kzalloc() may return NULL but this returned value is not checked.

In the Linux kernel, the following vulnerability has been resolved: cpufreq: CPPC: Fix possible null-ptr-deref for cppc_get_cpu_cost() cpufreq_cpu_get_raw() may return NULL if the cpu is not in policy->cpus cpu mask and it will cause null pointer dereference, so check NULL for cppc_get_cpu_cost().

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: CT: Fix null-ptr-deref in add rule err flow In error flow of mlx5_tc_ct_entry_add_rule(), in case ct_rule_add() callback returns error, zone_rule->attr is used uninitiated. Fix it to use attr which has the needed pointer value. Kernel log: BUG: kernel NULL pointer dereference, address: 0000000000000110 RIP: 0010:mlx5_tc_ct_entry_add_rule+0x2b1/0x2f0 [mlx5_core] … Call Trace: <TASK> ? __die+0x20/0x70 ? page_fault_oops+0x150/0x3e0 ? exc_page_fault+0x74/0x140 ? asm_exc_page_fault+0x22/0x30 ? mlx5_tc_ct_entry_add_rule+0x2b1/0x2f0 [mlx5_core] ? mlx5_tc_ct_entry_add_rule+0x1d5/0x2f0 [mlx5_core] mlx5_tc_ct_block_flow_offload+0xc6a/0xf90 [mlx5_core] ? nf_flow_offload_tuple+0xd8/0x190 [nf_flow_table] nf_flow_offload_tuple+0xd8/0x190 [nf_flow_table] flow_offload_work_handler+0x142/0x320 [nf_flow_table] ? finish_task_switch.isra.0+0x15b/0x2b0 process_one_work+0x16c/0x320 worker_thread+0x28c/0x3a0 ? __pfx_worker_thread+0x10/0x10 kthread+0xb8/0xf0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2d/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK>

In the Linux kernel, the following vulnerability has been resolved: idpf: fix idpf_vc_core_init error path In an event where the platform running the device control plane is rebooted, reset is detected on the driver. It releases all the resources and waits for the reset to complete. Once the reset is done, it tries to build the resources back. At this time if the device control plane is not yet started, then the driver timeouts on the virtchnl message and retries to establish the mailbox again. In the retry flow, mailbox is deinitialized but the mailbox workqueue is still alive and polling for the mailbox message. This results in accessing the released control queue leading to null-ptr-deref. Fix it by unrolling the work queue cancellation and mailbox deinitialization in the reverse order which they got initialized.

In the Linux kernel, the following vulnerability has been resolved: drm/rockchip: vop: Fix a dereferenced before check warning The 'state' can't be NULL, we should check crtc_state. Fix warning: drivers/gpu/drm/rockchip/rockchip_drm_vop.c:1096 vop_plane_atomic_async_check() warn: variable dereferenced before check 'state' (see line 1077)

In the Linux kernel, the following vulnerability has been resolved: virtio_pci: Fix admin vq cleanup by using correct info pointer vp_modern_avq_cleanup() and vp_del_vqs() clean up admin vq resources by virtio_pci_vq_info pointer. The info pointer of admin vq is stored in vp_dev->admin_vq.info instead of vp_dev->vqs[]. Using the info pointer from vp_dev->vqs[] for admin vq causes a kernel NULL pointer dereference bug. In vp_modern_avq_cleanup() and vp_del_vqs(), get the info pointer from vp_dev->admin_vq.info for admin vq to clean up the resources. Also make info ptr as argument of vp_del_vq() to be symmetric with vp_setup_vq(). vp_reset calls vp_modern_avq_cleanup, and causes the Call Trace: ================================================================== BUG: kernel NULL pointer dereference, address:0000000000000000 ... CPU: 49 UID: 0 PID: 4439 Comm: modprobe Not tainted 6.11.0-rc5 #1 RIP: 0010:vp_reset+0x57/0x90 [virtio_pci] Call Trace: <TASK> ... ? vp_reset+0x57/0x90 [virtio_pci] ? vp_reset+0x38/0x90 [virtio_pci] virtio_reset_device+0x1d/0x30 remove_vq_common+0x1c/0x1a0 [virtio_net] virtnet_remove+0xa1/0xc0 [virtio_net] virtio_dev_remove+0x46/0xa0 ... virtio_pci_driver_exit+0x14/0x810 [virtio_pci] ==================================================================

In the Linux kernel, the following vulnerability has been resolved: mm: fix NULL pointer dereference in alloc_pages_bulk_noprof We triggered a NULL pointer dereference for ac.preferred_zoneref->zone in alloc_pages_bulk_noprof() when the task is migrated between cpusets. When cpuset is enabled, in prepare_alloc_pages(), ac->nodemask may be &current->mems_allowed. when first_zones_zonelist() is called to find preferred_zoneref, the ac->nodemask may be modified concurrently if the task is migrated between different cpusets. Assuming we have 2 NUMA Node, when traversing Node1 in ac->zonelist, the nodemask is 2, and when traversing Node2 in ac->zonelist, the nodemask is 1. As a result, the ac->preferred_zoneref points to NULL zone. In alloc_pages_bulk_noprof(), for_each_zone_zonelist_nodemask() finds a allowable zone and calls zonelist_node_idx(ac.preferred_zoneref), leading to NULL pointer dereference. __alloc_pages_noprof() fixes this issue by checking NULL pointer in commit ea57485af8f4 ("mm, page_alloc: fix check for NULL preferred_zone") and commit df76cee6bbeb ("mm, page_alloc: remove redundant checks from alloc fastpath"). To fix it, check NULL pointer for preferred_zoneref->zone.

In the Linux kernel, the following vulnerability has been resolved: clk: clk-apple-nco: Add NULL check in applnco_probe Add NULL check in applnco_probe, to handle kernel NULL pointer dereference error.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix null check for pipe_ctx->plane_state in hwss_setup_dpp This commit addresses a null pointer dereference issue in hwss_setup_dpp(). The issue could occur when pipe_ctx->plane_state is null. The fix adds a check to ensure `pipe_ctx->plane_state` is not null before accessing. This prevents a null pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: Add exception protection processing for vd in axi_chan_handle_err function Since there is no protection for vd, a kernel panic will be triggered here in exceptional cases. You can refer to the processing of axi_chan_block_xfer_complete function The triggered kernel panic is as follows: [ 67.848444] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000060 [ 67.848447] Mem abort info: [ 67.848449] ESR = 0x96000004 [ 67.848451] EC = 0x25: DABT (current EL), IL = 32 bits [ 67.848454] SET = 0, FnV = 0 [ 67.848456] EA = 0, S1PTW = 0 [ 67.848458] Data abort info: [ 67.848460] ISV = 0, ISS = 0x00000004 [ 67.848462] CM = 0, WnR = 0 [ 67.848465] user pgtable: 4k pages, 48-bit VAs, pgdp=00000800c4c0b000 [ 67.848468] [0000000000000060] pgd=0000000000000000, p4d=0000000000000000 [ 67.848472] Internal error: Oops: 96000004 [#1] SMP [ 67.848475] Modules linked in: dmatest [ 67.848479] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.100-emu_x2rc+ #11 [ 67.848483] pstate: 62000085 (nZCv daIf -PAN -UAO +TCO BTYPE=--) [ 67.848487] pc : axi_chan_handle_err+0xc4/0x230 [ 67.848491] lr : axi_chan_handle_err+0x30/0x230 [ 67.848493] sp : ffff0803fe55ae50 [ 67.848495] x29: ffff0803fe55ae50 x28: ffff800011212200 [ 67.848500] x27: ffff0800c42c0080 x26: ffff0800c097c080 [ 67.848504] x25: ffff800010d33880 x24: ffff80001139d850 [ 67.848508] x23: ffff0800c097c168 x22: 0000000000000000 [ 67.848512] x21: 0000000000000080 x20: 0000000000002000 [ 67.848517] x19: ffff0800c097c080 x18: 0000000000000000 [ 67.848521] x17: 0000000000000000 x16: 0000000000000000 [ 67.848525] x15: 0000000000000000 x14: 0000000000000000 [ 67.848529] x13: 0000000000000000 x12: 0000000000000040 [ 67.848533] x11: ffff0800c0400248 x10: ffff0800c040024a [ 67.848538] x9 : ffff800010576cd4 x8 : ffff0800c0400270 [ 67.848542] x7 : 0000000000000000 x6 : ffff0800c04003e0 [ 67.848546] x5 : ffff0800c0400248 x4 : ffff0800c4294480 [ 67.848550] x3 : dead000000000100 x2 : dead000000000122 [ 67.848555] x1 : 0000000000000100 x0 : ffff0800c097c168 [ 67.848559] Call trace: [ 67.848562] axi_chan_handle_err+0xc4/0x230 [ 67.848566] dw_axi_dma_interrupt+0xf4/0x590 [ 67.848569] __handle_irq_event_percpu+0x60/0x220 [ 67.848573] handle_irq_event+0x64/0x120 [ 67.848576] handle_fasteoi_irq+0xc4/0x220 [ 67.848580] __handle_domain_irq+0x80/0xe0 [ 67.848583] gic_handle_irq+0xc0/0x138 [ 67.848585] el1_irq+0xc8/0x180 [ 67.848588] arch_cpu_idle+0x14/0x2c [ 67.848591] default_idle_call+0x40/0x16c [ 67.848594] do_idle+0x1f0/0x250 [ 67.848597] cpu_startup_entry+0x2c/0x60 [ 67.848600] rest_init+0xc0/0xcc [ 67.848603] arch_call_rest_init+0x14/0x1c [ 67.848606] start_kernel+0x4cc/0x500 [ 67.848610] Code: eb0002ff 9a9f12d6 f2fbd5a2 f2fbd5a3 (a94602c1) [ 67.848613] ---[ end trace 585a97036f88203a ]---

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btmtk: adjust the position to init iso data anchor MediaTek iso data anchor init should be moved to where MediaTek claims iso data interface. If there is an unexpected BT usb disconnect during setup flow, it will cause a NULL pointer crash issue when releasing iso anchor since the anchor wasn't been init yet. Adjust the position to do iso data anchor init. [ 17.137991] pc : usb_kill_anchored_urbs+0x60/0x168 [ 17.137998] lr : usb_kill_anchored_urbs+0x44/0x168 [ 17.137999] sp : ffffffc0890cb5f0 [ 17.138000] x29: ffffffc0890cb5f0 x28: ffffff80bb6c2e80 [ 17.144081] gpio gpiochip0: registered chardev handle for 1 lines [ 17.148421] x27: 0000000000000000 [ 17.148422] x26: ffffffd301ff4298 x25: 0000000000000003 x24: 00000000000000f0 [ 17.148424] x23: 0000000000000000 x22: 00000000ffffffff x21: 0000000000000001 [ 17.148425] x20: ffffffffffffffd8 x19: ffffff80c0f25560 x18: 0000000000000000 [ 17.148427] x17: ffffffd33864e408 x16: ffffffd33808f7c8 x15: 0000000000200000 [ 17.232789] x14: e0cd73cf80ffffff x13: 50f2137c0a0338c9 x12: 0000000000000001 [ 17.239912] x11: 0000000080150011 x10: 0000000000000002 x9 : 0000000000000001 [ 17.247035] x8 : 0000000000000000 x7 : 0000000000008080 x6 : 8080000000000000 [ 17.254158] x5 : ffffffd33808ebc0 x4 : fffffffe033dcf20 x3 : 0000000080150011 [ 17.261281] x2 : ffffff8087a91400 x1 : 0000000000000000 x0 : ffffff80c0f25588 [ 17.268404] Call trace: [ 17.270841] usb_kill_anchored_urbs+0x60/0x168 [ 17.275274] btusb_mtk_release_iso_intf+0x2c/0xd8 [btusb (HASH:5afe 6)] [ 17.284226] btusb_mtk_disconnect+0x14/0x28 [btusb (HASH:5afe 6)] [ 17.292652] btusb_disconnect+0x70/0x140 [btusb (HASH:5afe 6)] [ 17.300818] usb_unbind_interface+0xc4/0x240 [ 17.305079] device_release_driver_internal+0x18c/0x258 [ 17.310296] device_release_driver+0x1c/0x30 [ 17.314557] bus_remove_device+0x140/0x160 [ 17.318643] device_del+0x1c0/0x330 [ 17.322121] usb_disable_device+0x80/0x180 [ 17.326207] usb_disconnect+0xec/0x300 [ 17.329948] hub_quiesce+0x80/0xd0 [ 17.333339] hub_disconnect+0x44/0x190 [ 17.337078] usb_unbind_interface+0xc4/0x240 [ 17.341337] device_release_driver_internal+0x18c/0x258 [ 17.346551] device_release_driver+0x1c/0x30 [ 17.350810] usb_driver_release_interface+0x70/0x88 [ 17.355677] proc_ioctl+0x13c/0x228 [ 17.359157] proc_ioctl_default+0x50/0x80 [ 17.363155] usbdev_ioctl+0x830/0xd08 [ 17.366808] __arm64_sys_ioctl+0x94/0xd0 [ 17.370723] invoke_syscall+0x6c/0xf8 [ 17.374377] el0_svc_common+0x84/0xe0 [ 17.378030] do_el0_svc+0x20/0x30 [ 17.381334] el0_svc+0x34/0x60 [ 17.384382] el0t_64_sync_handler+0x88/0xf0 [ 17.388554] el0t_64_sync+0x180/0x188 [ 17.392208] Code: f9400677 f100a2f4 54fffea0 d503201f (b8350288) [ 17.398289] ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: prevent NULL pointer dereference if ATIF is not supported acpi_evaluate_object() may return AE_NOT_FOUND (failure), which would result in dereferencing buffer.pointer (obj) while being NULL. Although this case may be unrealistic for the current code, it is still better to protect against possible bugs. Bail out also when status is AE_NOT_FOUND. This fixes 1 FORWARD_NULL issue reported by Coverity Report: CID 1600951: Null pointer dereferences (FORWARD_NULL) (cherry picked from commit 91c9e221fe2553edf2db71627d8453f083de87a1)

In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: Add sanity NULL check for the default mmap fault handler A driver might allow the mmap access before initializing its runtime->dma_area properly. Add a proper NULL check before passing to virt_to_page() for avoiding a panic.

In the Linux kernel, the following vulnerability has been resolved: iommu/s390: Implement blocking domain This fixes a crash when surprise hot-unplugging a PCI device. This crash happens because during hot-unplug __iommu_group_set_domain_nofail() attaching the default domain fails when the platform no longer recognizes the device as it has already been removed and we end up with a NULL domain pointer and UAF. This is exactly the case referred to in the second comment in __iommu_device_set_domain() and just as stated there if we can instead attach the blocking domain the UAF is prevented as this can handle the already removed device. Implement the blocking domain to use this handling. With this change, the crash is fixed but we still hit a warning attempting to change DMA ownership on a blocked device.

In the Linux kernel, the following vulnerability has been resolved: drm/mediatek: Fix potential NULL dereference in mtk_crtc_destroy() In mtk_crtc_create(), if the call to mbox_request_channel() fails then we set the "mtk_crtc->cmdq_client.chan" pointer to NULL. In that situation, we do not call cmdq_pkt_create(). During the cleanup, we need to check if the "mtk_crtc->cmdq_client.chan" is NULL first before calling cmdq_pkt_destroy(). Calling cmdq_pkt_destroy() is unnecessary if we didn't call cmdq_pkt_create() and it will result in a NULL pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: drm/i915/hdcp: Add encoder check in hdcp2_get_capability Add encoder check in intel_hdcp2_get_capability to avoid null pointer error.

In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Fix receive ring space parameters when XDP is active The MTU setting at the time an XDP multi-buffer is attached determines whether the aggregation ring will be used and the rx_skb_func handler. This is done in bnxt_set_rx_skb_mode(). If the MTU is later changed, the aggregation ring setting may need to be changed and it may become out-of-sync with the settings initially done in bnxt_set_rx_skb_mode(). This may result in random memory corruption and crashes as the HW may DMA data larger than the allocated buffer size, such as: BUG: kernel NULL pointer dereference, address: 00000000000003c0 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 17 PID: 0 Comm: swapper/17 Kdump: loaded Tainted: G S OE 6.1.0-226bf9805506 #1 Hardware name: Wiwynn Delta Lake PVT BZA.02601.0150/Delta Lake-Class1, BIOS F0E_3A12 08/26/2021 RIP: 0010:bnxt_rx_pkt+0xe97/0x1ae0 [bnxt_en] Code: 8b 95 70 ff ff ff 4c 8b 9d 48 ff ff ff 66 41 89 87 b4 00 00 00 e9 0b f7 ff ff 0f b7 43 0a 49 8b 95 a8 04 00 00 25 ff 0f 00 00 <0f> b7 14 42 48 c1 e2 06 49 03 95 a0 04 00 00 0f b6 42 33f RSP: 0018:ffffa19f40cc0d18 EFLAGS: 00010202 RAX: 00000000000001e0 RBX: ffff8e2c805c6100 RCX: 00000000000007ff RDX: 0000000000000000 RSI: ffff8e2c271ab990 RDI: ffff8e2c84f12380 RBP: ffffa19f40cc0e48 R08: 000000000001000d R09: 974ea2fcddfa4cbf R10: 0000000000000000 R11: ffffa19f40cc0ff8 R12: ffff8e2c94b58980 R13: ffff8e2c952d6600 R14: 0000000000000016 R15: ffff8e2c271ab990 FS: 0000000000000000(0000) GS:ffff8e3b3f840000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000003c0 CR3: 0000000e8580a004 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <IRQ> __bnxt_poll_work+0x1c2/0x3e0 [bnxt_en] To address the issue, we now call bnxt_set_rx_skb_mode() within bnxt_change_mtu() to properly set the AGG rings configuration and update rx_skb_func based on the new MTU value. Additionally, BNXT_FLAG_NO_AGG_RINGS is cleared at the beginning of bnxt_set_rx_skb_mode() to make sure it gets set or cleared based on the current MTU.

In the Linux kernel, the following vulnerability has been resolved: vme: Fix error not catched in fake_init() In fake_init(), __root_device_register() is possible to fail but it's ignored, which can cause unregistering vme_root fail when exit. general protection fault, probably for non-canonical address 0xdffffc000000008c KASAN: null-ptr-deref in range [0x0000000000000460-0x0000000000000467] RIP: 0010:root_device_unregister+0x26/0x60 Call Trace: <TASK> __x64_sys_delete_module+0x34f/0x540 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd Return error when __root_device_register() fails.

In the Linux kernel, the following vulnerability has been resolved: SUNRPC: Fix null pointer dereference in svc_rqst_free() When alloc_pages_node() returns null in svc_rqst_alloc(), the null rq_scratch_page pointer will be dereferenced when calling put_page() in svc_rqst_free(). Fix it by adding a null check. Addresses-Coverity: ("Dereference after null check")

In the Linux kernel, the following vulnerability has been resolved: f2fs: ensure node page reads complete before f2fs_put_super() finishes Xfstests generic/335, generic/336 sometimes crash with the following message: F2FS-fs (dm-0): detect filesystem reference count leak during umount, type: 9, count: 1 ------------[ cut here ]------------ kernel BUG at fs/f2fs/super.c:1939! Oops: invalid opcode: 0000 [#1] SMP NOPTI CPU: 1 UID: 0 PID: 609351 Comm: umount Tainted: G W 6.17.0-rc5-xfstests-g9dd1835ecda5 #1 PREEMPT(none) Tainted: [W]=WARN Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:f2fs_put_super+0x3b3/0x3c0 Call Trace: <TASK> generic_shutdown_super+0x7e/0x190 kill_block_super+0x1a/0x40 kill_f2fs_super+0x9d/0x190 deactivate_locked_super+0x30/0xb0 cleanup_mnt+0xba/0x150 task_work_run+0x5c/0xa0 exit_to_user_mode_loop+0xb7/0xc0 do_syscall_64+0x1ae/0x1c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> ---[ end trace 0000000000000000 ]--- It appears that sometimes it is possible that f2fs_put_super() is called before all node page reads are completed. Adding a call to f2fs_wait_on_all_pages() for F2FS_RD_NODE fixes the problem.

In the Linux kernel, the following vulnerability has been resolved: net: bridge: fix vlan tunnel dst null pointer dereference This patch fixes a tunnel_dst null pointer dereference due to lockless access in the tunnel egress path. When deleting a vlan tunnel the tunnel_dst pointer is set to NULL without waiting a grace period (i.e. while it's still usable) and packets egressing are dereferencing it without checking. Use READ/WRITE_ONCE to annotate the lockless use of tunnel_id, use RCU for accessing tunnel_dst and make sure it is read only once and checked in the egress path. The dst is already properly RCU protected so we don't need to do anything fancy than to make sure tunnel_id and tunnel_dst are read only once and checked in the egress path.

In the Linux kernel, the following vulnerability has been resolved: pnode: terminate at peers of source The propagate_mnt() function handles mount propagation when creating mounts and propagates the source mount tree @source_mnt to all applicable nodes of the destination propagation mount tree headed by @dest_mnt. Unfortunately it contains a bug where it fails to terminate at peers of @source_mnt when looking up copies of the source mount that become masters for copies of the source mount tree mounted on top of slaves in the destination propagation tree causing a NULL dereference. Once the mechanics of the bug are understood it's easy to trigger. Because of unprivileged user namespaces it is available to unprivileged users. While fixing this bug we've gotten confused multiple times due to unclear terminology or missing concepts. So let's start this with some clarifications: * The terms "master" or "peer" denote a shared mount. A shared mount belongs to a peer group. * A peer group is a set of shared mounts that propagate to each other. They are identified by a peer group id. The peer group id is available in @shared_mnt->mnt_group_id. Shared mounts within the same peer group have the same peer group id. The peers in a peer group can be reached via @shared_mnt->mnt_share. * The terms "slave mount" or "dependent mount" denote a mount that receives propagation from a peer in a peer group. IOW, shared mounts may have slave mounts and slave mounts have shared mounts as their master. Slave mounts of a given peer in a peer group are listed on that peers slave list available at @shared_mnt->mnt_slave_list. * The term "master mount" denotes a mount in a peer group. IOW, it denotes a shared mount or a peer mount in a peer group. The term "master mount" - or "master" for short - is mostly used when talking in the context of slave mounts that receive propagation from a master mount. A master mount of a slave identifies the closest peer group a slave mount receives propagation from. The master mount of a slave can be identified via @slave_mount->mnt_master. Different slaves may point to different masters in the same peer group. * Multiple peers in a peer group can have non-empty ->mnt_slave_lists. Non-empty ->mnt_slave_lists of peers don't intersect. Consequently, to ensure all slave mounts of a peer group are visited the ->mnt_slave_lists of all peers in a peer group have to be walked. * Slave mounts point to a peer in the closest peer group they receive propagation from via @slave_mnt->mnt_master (see above). Together with these peers they form a propagation group (see below). The closest peer group can thus be identified through the peer group id @slave_mnt->mnt_master->mnt_group_id of the peer/master that a slave mount receives propagation from. * A shared-slave mount is a slave mount to a peer group pg1 while also a peer in another peer group pg2. IOW, a peer group may receive propagation from another peer group. If a peer group pg1 is a slave to another peer group pg2 then all peers in peer group pg1 point to the same peer in peer group pg2 via ->mnt_master. IOW, all peers in peer group pg1 appear on the same ->mnt_slave_list. IOW, they cannot be slaves to different peer groups. * A pure slave mount is a slave mount that is a slave to a peer group but is not a peer in another peer group. * A propagation group denotes the set of mounts consisting of a single peer group pg1 and all slave mounts and shared-slave mounts that point to a peer in that peer group via ->mnt_master. IOW, all slave mounts such that @slave_mnt->mnt_master->mnt_group_id is equal to @shared_mnt->mnt_group_id. The concept of a propagation group makes it easier to talk about a single propagation level in a propagation tree. For example, in propagate_mnt() the immediate peers of @dest_mnt and all slaves of @dest_mnt's peer group form a propagation group pr ---truncated---

In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Fix NULL pointer problem in free_mr_init() Lock grab occurs in a concurrent scenario, resulting in stepping on a NULL pointer. It should be init mutex_init() first before use the lock. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Call trace: __mutex_lock.constprop.0+0xd0/0x5c0 __mutex_lock_slowpath+0x1c/0x2c mutex_lock+0x44/0x50 free_mr_send_cmd_to_hw+0x7c/0x1c0 [hns_roce_hw_v2] hns_roce_v2_dereg_mr+0x30/0x40 [hns_roce_hw_v2] hns_roce_dereg_mr+0x4c/0x130 [hns_roce_hw_v2] ib_dereg_mr_user+0x54/0x124 uverbs_free_mr+0x24/0x30 destroy_hw_idr_uobject+0x38/0x74 uverbs_destroy_uobject+0x48/0x1c4 uobj_destroy+0x74/0xcc ib_uverbs_cmd_verbs+0x368/0xbb0 ib_uverbs_ioctl+0xec/0x1a4 __arm64_sys_ioctl+0xb4/0x100 invoke_syscall+0x50/0x120 el0_svc_common.constprop.0+0x58/0x190 do_el0_svc+0x30/0x90 el0_svc+0x2c/0xb4 el0t_64_sync_handler+0x1a4/0x1b0 el0t_64_sync+0x19c/0x1a0

In the Linux kernel, the following vulnerability has been resolved: SUNRPC: Fix null-ptr-deref when xps sysfs alloc failed There is a null-ptr-deref when xps sysfs alloc failed: BUG: KASAN: null-ptr-deref in sysfs_do_create_link_sd+0x40/0xd0 Read of size 8 at addr 0000000000000030 by task gssproxy/457 CPU: 5 PID: 457 Comm: gssproxy Not tainted 6.0.0-09040-g02357b27ee03 #9 Call Trace: <TASK> dump_stack_lvl+0x34/0x44 kasan_report+0xa3/0x120 sysfs_do_create_link_sd+0x40/0xd0 rpc_sysfs_client_setup+0x161/0x1b0 rpc_new_client+0x3fc/0x6e0 rpc_create_xprt+0x71/0x220 rpc_create+0x1d4/0x350 gssp_rpc_create+0xc3/0x160 set_gssp_clnt+0xbc/0x140 write_gssp+0x116/0x1a0 proc_reg_write+0xd6/0x130 vfs_write+0x177/0x690 ksys_write+0xb9/0x150 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 When the xprt_switch sysfs alloc failed, should not add xprt and switch sysfs to it, otherwise, maybe null-ptr-deref; also initialize the 'xps_sysfs' to NULL to avoid oops when destroy it.

In the Linux kernel, the following vulnerability has been resolved: udf: Fix NULL pointer dereference in udf_symlink function In function udf_symlink, epos.bh is assigned with the value returned by udf_tgetblk. The function udf_tgetblk is defined in udf/misc.c and returns the value of sb_getblk function that could be NULL. Then, epos.bh is used without any check, causing a possible NULL pointer dereference when sb_getblk fails. This fix adds a check to validate the value of epos.bh.

In the Linux kernel, the following vulnerability has been resolved: ASoC: core: Fix Null-point-dereference in fmt_single_name() Check the return value of devm_kstrdup() in case of Null-point-dereference.

In the Linux kernel, the following vulnerability has been resolved: usb: fix various gadgets null ptr deref on 10gbps cabling. This avoids a null pointer dereference in f_{ecm,eem,hid,loopback,printer,rndis,serial,sourcesink,subset,tcm} by simply reusing the 5gbps config for 10gbps.

In the Linux kernel, the following vulnerability has been resolved: nbd: Fix NULL pointer in flush_workqueue Open /dev/nbdX first, the config_refs will be 1 and the pointers in nbd_device are still null. Disconnect /dev/nbdX, then reference a null recv_workq. The protection by config_refs in nbd_genl_disconnect is useless. [ 656.366194] BUG: kernel NULL pointer dereference, address: 0000000000000020 [ 656.368943] #PF: supervisor write access in kernel mode [ 656.369844] #PF: error_code(0x0002) - not-present page [ 656.370717] PGD 10cc87067 P4D 10cc87067 PUD 1074b4067 PMD 0 [ 656.371693] Oops: 0002 [#1] SMP [ 656.372242] CPU: 5 PID: 7977 Comm: nbd-client Not tainted 5.11.0-rc5-00040-g76c057c84d28 #1 [ 656.373661] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-ppc64le-16.ppc.fedoraproject.org-3.fc31 04/01/2014 [ 656.375904] RIP: 0010:mutex_lock+0x29/0x60 [ 656.376627] Code: 00 0f 1f 44 00 00 55 48 89 fd 48 83 05 6f d7 fe 08 01 e8 7a c3 ff ff 48 83 05 6a d7 fe 08 01 31 c0 65 48 8b 14 25 00 6d 01 00 <f0> 48 0f b1 55 d [ 656.378934] RSP: 0018:ffffc900005eb9b0 EFLAGS: 00010246 [ 656.379350] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 656.379915] RDX: ffff888104cf2600 RSI: ffffffffaae8f452 RDI: 0000000000000020 [ 656.380473] RBP: 0000000000000020 R08: 0000000000000000 R09: ffff88813bd6b318 [ 656.381039] R10: 00000000000000c7 R11: fefefefefefefeff R12: ffff888102710b40 [ 656.381599] R13: ffffc900005eb9e0 R14: ffffffffb2930680 R15: ffff88810770ef00 [ 656.382166] FS: 00007fdf117ebb40(0000) GS:ffff88813bd40000(0000) knlGS:0000000000000000 [ 656.382806] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 656.383261] CR2: 0000000000000020 CR3: 0000000100c84000 CR4: 00000000000006e0 [ 656.383819] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 656.384370] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 656.384927] Call Trace: [ 656.385111] flush_workqueue+0x92/0x6c0 [ 656.385395] nbd_disconnect_and_put+0x81/0xd0 [ 656.385716] nbd_genl_disconnect+0x125/0x2a0 [ 656.386034] genl_family_rcv_msg_doit.isra.0+0x102/0x1b0 [ 656.386422] genl_rcv_msg+0xfc/0x2b0 [ 656.386685] ? nbd_ioctl+0x490/0x490 [ 656.386954] ? genl_family_rcv_msg_doit.isra.0+0x1b0/0x1b0 [ 656.387354] netlink_rcv_skb+0x62/0x180 [ 656.387638] genl_rcv+0x34/0x60 [ 656.387874] netlink_unicast+0x26d/0x590 [ 656.388162] netlink_sendmsg+0x398/0x6c0 [ 656.388451] ? netlink_rcv_skb+0x180/0x180 [ 656.388750] ____sys_sendmsg+0x1da/0x320 [ 656.389038] ? ____sys_recvmsg+0x130/0x220 [ 656.389334] ___sys_sendmsg+0x8e/0xf0 [ 656.389605] ? ___sys_recvmsg+0xa2/0xf0 [ 656.389889] ? handle_mm_fault+0x1671/0x21d0 [ 656.390201] __sys_sendmsg+0x6d/0xe0 [ 656.390464] __x64_sys_sendmsg+0x23/0x30 [ 656.390751] do_syscall_64+0x45/0x70 [ 656.391017] entry_SYSCALL_64_after_hwframe+0x44/0xa9 To fix it, just add if (nbd->recv_workq) to nbd_disconnect_and_put().

In the Linux kernel, the following vulnerability has been resolved: mt76: mt7921: fix kernel crash at mt7921_pci_remove The crash log shown it is possible that mt7921_irq_handler is called while devm_free_irq is being handled so mt76_free_device need to be postponed until devm_free_irq is completed to solve the crash we free the mt76 device too early. [ 9299.339655] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 9299.339705] #PF: supervisor read access in kernel mode [ 9299.339735] #PF: error_code(0x0000) - not-present page [ 9299.339768] PGD 0 P4D 0 [ 9299.339786] Oops: 0000 [#1] SMP PTI [ 9299.339812] CPU: 1 PID: 1624 Comm: prepare-suspend Not tainted 5.15.14-1.fc32.qubes.x86_64 #1 [ 9299.339863] Hardware name: Xen HVM domU, BIOS 4.14.3 01/20/2022 [ 9299.339901] RIP: 0010:mt7921_irq_handler+0x1e/0x70 [mt7921e] [ 9299.340048] RSP: 0018:ffffa81b80c27cb0 EFLAGS: 00010082 [ 9299.340081] RAX: 0000000000000000 RBX: ffff98a4cb752020 RCX: ffffffffa96211c5 [ 9299.340123] RDX: 0000000000000000 RSI: 00000000000d4204 RDI: ffff98a4cb752020 [ 9299.340165] RBP: ffff98a4c28a62a4 R08: ffff98a4c37a96c0 R09: 0000000080150011 [ 9299.340207] R10: 0000000040000000 R11: 0000000000000000 R12: ffff98a4c4eaa080 [ 9299.340249] R13: ffff98a4c28a6360 R14: ffff98a4cb752020 R15: ffff98a4c28a6228 [ 9299.340297] FS: 00007260840d3740(0000) GS:ffff98a4ef700000(0000) knlGS:0000000000000000 [ 9299.340345] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 9299.340383] CR2: 0000000000000008 CR3: 0000000004c56001 CR4: 0000000000770ee0 [ 9299.340432] PKRU: 55555554 [ 9299.340449] Call Trace: [ 9299.340467] <TASK> [ 9299.340485] __free_irq+0x221/0x350 [ 9299.340527] free_irq+0x30/0x70 [ 9299.340553] devm_free_irq+0x55/0x80 [ 9299.340579] mt7921_pci_remove+0x2f/0x40 [mt7921e] [ 9299.340616] pci_device_remove+0x3b/0xa0 [ 9299.340651] __device_release_driver+0x17a/0x240 [ 9299.340686] device_driver_detach+0x3c/0xa0 [ 9299.340714] unbind_store+0x113/0x130 [ 9299.340740] kernfs_fop_write_iter+0x124/0x1b0 [ 9299.340775] new_sync_write+0x15c/0x1f0 [ 9299.340806] vfs_write+0x1d2/0x270 [ 9299.340831] ksys_write+0x67/0xe0 [ 9299.340857] do_syscall_64+0x3b/0x90 [ 9299.340887] entry_SYSCALL_64_after_hwframe+0x44/0xae

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix NULL pointer dereference in amdgpu_gmc_filter_faults_remove On APUs such as Raven and Renoir (GC 9.1.0, 9.2.2, 9.3.0), the ih1 and ih2 interrupt ring buffers are not initialized. This is by design, as these secondary IH rings are only available on discrete GPUs. See vega10_ih_sw_init() which explicitly skips ih1/ih2 initialization when AMD_IS_APU is set. However, amdgpu_gmc_filter_faults_remove() unconditionally uses ih1 to get the timestamp of the last interrupt entry. When retry faults are enabled on APUs (noretry=0), this function is called from the SVM page fault recovery path, resulting in a NULL pointer dereference when amdgpu_ih_decode_iv_ts_helper() attempts to access ih->ring[]. The crash manifests as: BUG: kernel NULL pointer dereference, address: 0000000000000004 RIP: 0010:amdgpu_ih_decode_iv_ts_helper+0x22/0x40 [amdgpu] Call Trace: amdgpu_gmc_filter_faults_remove+0x60/0x130 [amdgpu] svm_range_restore_pages+0xae5/0x11c0 [amdgpu] amdgpu_vm_handle_fault+0xc8/0x340 [amdgpu] gmc_v9_0_process_interrupt+0x191/0x220 [amdgpu] amdgpu_irq_dispatch+0xed/0x2c0 [amdgpu] amdgpu_ih_process+0x84/0x100 [amdgpu] This issue was exposed by commit 1446226d32a4 ("drm/amdgpu: Remove GC HW IP 9.3.0 from noretry=1") which changed the default for Renoir APU from noretry=1 to noretry=0, enabling retry fault handling and thus exercising the buggy code path. Fix this by adding a check for ih1.ring_size before attempting to use it. Also restore the soft_ih support from commit dd299441654f ("drm/amdgpu: Rework retry fault removal"). This is needed if the hardware doesn't support secondary HW IH rings. v2: additional updates (Alex) (cherry picked from commit 6ce8d536c80aa1f059e82184f0d1994436b1d526)

In the Linux kernel, the following vulnerability has been resolved: KVM: Don't clobber irqfd routing type when deassigning irqfd When deassigning a KVM_IRQFD, don't clobber the irqfd's copy of the IRQ's routing entry as doing so breaks kvm_arch_irq_bypass_del_producer() on x86 and arm64, which explicitly look for KVM_IRQ_ROUTING_MSI. Instead, to handle a concurrent routing update, verify that the irqfd is still active before consuming the routing information. As evidenced by the x86 and arm64 bugs, and another bug in kvm_arch_update_irqfd_routing() (see below), clobbering the entry type without notifying arch code is surprising and error prone. As a bonus, checking that the irqfd is active provides a convenient location for documenting _why_ KVM must not consume the routing entry for an irqfd that is in the process of being deassigned: once the irqfd is deleted from the list (which happens *before* the eventfd is detached), it will no longer receive updates via kvm_irq_routing_update(), and so KVM could deliver an event using stale routing information (relative to KVM_SET_GSI_ROUTING returning to userspace). As an even better bonus, explicitly checking for the irqfd being active fixes a similar bug to the one the clobbering is trying to prevent: if an irqfd is deactivated, and then its routing is changed, kvm_irq_routing_update() won't invoke kvm_arch_update_irqfd_routing() (because the irqfd isn't in the list). And so if the irqfd is in bypass mode, IRQs will continue to be posted using the old routing information. As for kvm_arch_irq_bypass_del_producer(), clobbering the routing type results in KVM incorrectly keeping the IRQ in bypass mode, which is especially problematic on AMD as KVM tracks IRQs that are being posted to a vCPU in a list whose lifetime is tied to the irqfd. Without the help of KASAN to detect use-after-free, the most common sympton on AMD is a NULL pointer deref in amd_iommu_update_ga() due to the memory for irqfd structure being re-allocated and zeroed, resulting in irqfd->irq_bypass_data being NULL when read by avic_update_iommu_vcpu_affinity(): BUG: kernel NULL pointer dereference, address: 0000000000000018 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 40cf2b9067 P4D 40cf2b9067 PUD 408362a067 PMD 0 Oops: Oops: 0000 [#1] SMP CPU: 6 UID: 0 PID: 40383 Comm: vfio_irq_test Tainted: G U W O 6.19.0-smp--5dddc257e6b2-irqfd #31 NONE Tainted: [U]=USER, [W]=WARN, [O]=OOT_MODULE Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 34.78.2-0 09/05/2025 RIP: 0010:amd_iommu_update_ga+0x19/0xe0 Call Trace: <TASK> avic_update_iommu_vcpu_affinity+0x3d/0x90 [kvm_amd] __avic_vcpu_load+0xf4/0x130 [kvm_amd] kvm_arch_vcpu_load+0x89/0x210 [kvm] vcpu_load+0x30/0x40 [kvm] kvm_arch_vcpu_ioctl_run+0x45/0x620 [kvm] kvm_vcpu_ioctl+0x571/0x6a0 [kvm] __se_sys_ioctl+0x6d/0xb0 do_syscall_64+0x6f/0x9d0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x46893b </TASK> ---[ end trace 0000000000000000 ]--- If AVIC is inhibited when the irfd is deassigned, the bug will manifest as list corruption, e.g. on the next irqfd assignment. list_add corruption. next->prev should be prev (ffff8d474d5cd588), but was 0000000000000000. (next=ffff8d8658f86530). ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:31! Oops: invalid opcode: 0000 [#1] SMP CPU: 128 UID: 0 PID: 80818 Comm: vfio_irq_test Tainted: G U W O 6.19.0-smp--f19dc4d680ba-irqfd #28 NONE Tainted: [U]=USER, [W]=WARN, [O]=OOT_MODULE Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 34.78.2-0 09/05/2025 RIP: 0010:__list_add_valid_or_report+0x97/0xc0 Call Trace: <TASK> avic_pi_update_irte+0x28e/0x2b0 [kvm_amd] kvm_pi_update_irte+0xbf/0x190 [kvm] kvm_arch_irq_bypass_add_producer+0x72/0x90 [kvm] irq_bypass_register_consumer+0xcd/0x170 [irqbypa ---truncated---

In the Linux kernel, the following vulnerability has been resolved: ceph: fix NULL pointer dereference in ceph_mds_auth_match() The CephFS kernel client has regression starting from 6.18-rc1. We have issue in ceph_mds_auth_match() if fs_name == NULL: const char fs_name = mdsc->fsc->mount_options->mds_namespace; ... if (auth->match.fs_name && strcmp(auth->match.fs_name, fs_name)) { / fsname mismatch, try next one */ return 0; } Patrick Donnelly suggested that: In summary, we should definitely start decoding `fs_name` from the MDSMap and do strict authorizations checks against it. Note that the `-o mds_namespace=foo` should only be used for selecting the file system to mount and nothing else. It's possible no mds_namespace is specified but the kernel will mount the only file system that exists which may have name "foo". This patch reworks ceph_mdsmap_decode() and namespace_equals() with the goal of supporting the suggested concept. Now struct ceph_mdsmap contains m_fs_name field that receives copy of extracted FS name by ceph_extract_encoded_string(). For the case of "old" CephFS file systems, it is used "cephfs" name. [ idryomov: replace redundant %*pE with %s in ceph_mdsmap_decode(), get rid of a series of strlen() calls in ceph_namespace_match(), drop changes to namespace_equals() body to avoid treating empty mds_namespace as equal, drop changes to ceph_mdsc_handle_fsmap() as namespace_equals() isn't an equivalent substitution there ]

In the Linux kernel, the following vulnerability has been resolved: can: dev: can_get_echo_skb(): prevent call to kfree_skb() in hard IRQ context If a driver calls can_get_echo_skb() during a hardware IRQ (which is often, but not always, the case), the 'WARN_ON(in_irq)' in net/core/skbuff.c#skb_release_head_state() might be triggered, under network congestion circumstances, together with the potential risk of a NULL pointer dereference. The root cause of this issue is the call to kfree_skb() instead of dev_kfree_skb_irq() in net/core/dev.c#enqueue_to_backlog(). This patch prevents the skb to be freed within the call to netif_rx() by incrementing its reference count with skb_get(). The skb is finally freed by one of the in-irq-context safe functions: dev_consume_skb_any() or dev_kfree_skb_any(). The "any" version is used because some drivers might call can_get_echo_skb() in a normal context. The reason for this issue to occur is that initially, in the core network stack, loopback skb were not supposed to be received in hardware IRQ context. The CAN stack is an exeption. This bug was previously reported back in 2017 in [1] but the proposed patch never got accepted. While [1] directly modifies net/core/dev.c, we try to propose here a smoother modification local to CAN network stack (the assumption behind is that only CAN devices are affected by this issue). [1] http://lore.kernel.org/r/57a3ffb6-3309-3ad5-5a34-e93c3fe3614d@cetitec.com

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Lag, fix failure to cancel delayed bond work Commit 0d4e8ed139d8 ("net/mlx5: Lag, avoid lockdep warnings") accidentally removed a call to cancel delayed bond work thus it may cause queued delay to expire and fall on an already destroyed work queue. Fix by restoring the call cancel_delayed_work_sync() before destroying the workqueue. This prevents call trace such as this: [ 329.230417] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 329.231444] #PF: supervisor write access in kernel mode [ 329.232233] #PF: error_code(0x0002) - not-present page [ 329.233007] PGD 0 P4D 0 [ 329.233476] Oops: 0002 [#1] SMP [ 329.234012] CPU: 5 PID: 145 Comm: kworker/u20:4 Tainted: G OE 6.0.0-rc5_mlnx #1 [ 329.235282] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 329.236868] Workqueue: mlx5_cmd_0000:08:00.1 cmd_work_handler [mlx5_core] [ 329.237886] RIP: 0010:_raw_spin_lock+0xc/0x20 [ 329.238585] Code: f0 0f b1 17 75 02 f3 c3 89 c6 e9 6f 3c 5f ff 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 0f 1f 44 00 00 31 c0 ba 01 00 00 00 <f0> 0f b1 17 75 02 f3 c3 89 c6 e9 45 3c 5f ff 0f 1f 44 00 00 0f 1f [ 329.241156] RSP: 0018:ffffc900001b0e98 EFLAGS: 00010046 [ 329.241940] RAX: 0000000000000000 RBX: ffffffff82374ae0 RCX: 0000000000000000 [ 329.242954] RDX: 0000000000000001 RSI: 0000000000000014 RDI: 0000000000000000 [ 329.243974] RBP: ffff888106ccf000 R08: ffff8881004000c8 R09: ffff888100400000 [ 329.244990] R10: 0000000000000000 R11: ffffffff826669f8 R12: 0000000000002000 [ 329.246009] R13: 0000000000000005 R14: ffff888100aa7ce0 R15: ffff88852ca80000 [ 329.247030] FS: 0000000000000000(0000) GS:ffff88852ca80000(0000) knlGS:0000000000000000 [ 329.248260] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 329.249111] CR2: 0000000000000000 CR3: 000000016d675001 CR4: 0000000000770ee0 [ 329.250133] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 329.251152] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 329.252176] PKRU: 55555554

In the Linux kernel, the following vulnerability has been resolved: drm/ttm: Fix dummy res NULL ptr deref bug Check the bo->resource value before accessing the resource mem_type. v2: Fix commit description unwrapped warning <log snip> [ 40.191227][ T184] general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] SMP KASAN PTI [ 40.192995][ T184] KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] [ 40.194411][ T184] CPU: 1 PID: 184 Comm: systemd-udevd Not tainted 5.19.0-rc4-00721-gb297c22b7070 #1 [ 40.196063][ T184] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-debian-1.16.0-4 04/01/2014 [ 40.199605][ T184] RIP: 0010:ttm_bo_validate+0x1b3/0x240 [ttm] [ 40.200754][ T184] Code: e8 72 c5 ff ff 83 f8 b8 74 d4 85 c0 75 54 49 8b 9e 58 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 8d 7b 10 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 04 3c 03 7e 44 8b 53 10 31 c0 85 d2 0f 85 58 [ 40.203685][ T184] RSP: 0018:ffffc900006df0c8 EFLAGS: 00010202 [ 40.204630][ T184] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 1ffff1102f4bb71b [ 40.205864][ T184] RDX: 0000000000000002 RSI: ffffc900006df208 RDI: 0000000000000010 [ 40.207102][ T184] RBP: 1ffff920000dbe1a R08: ffffc900006df208 R09: 0000000000000000 [ 40.208394][ T184] R10: ffff88817a5f0000 R11: 0000000000000001 R12: ffffc900006df110 [ 40.209692][ T184] R13: ffffc900006df0f0 R14: ffff88817a5db800 R15: ffffc900006df208 [ 40.210862][ T184] FS: 00007f6b1d16e8c0(0000) GS:ffff88839d700000(0000) knlGS:0000000000000000 [ 40.212250][ T184] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 40.213275][ T184] CR2: 000055a1001d4ff0 CR3: 00000001700f4000 CR4: 00000000000006e0 [ 40.214469][ T184] Call Trace: [ 40.214974][ T184] <TASK> [ 40.215438][ T184] ? ttm_bo_bounce_temp_buffer+0x140/0x140 [ttm] [ 40.216572][ T184] ? mutex_spin_on_owner+0x240/0x240 [ 40.217456][ T184] ? drm_vma_offset_add+0xaa/0x100 [drm] [ 40.218457][ T184] ttm_bo_init_reserved+0x3d6/0x540 [ttm] [ 40.219410][ T184] ? shmem_get_inode+0x744/0x980 [ 40.220231][ T184] ttm_bo_init_validate+0xb1/0x200 [ttm] [ 40.221172][ T184] ? bo_driver_evict_flags+0x340/0x340 [drm_vram_helper] [ 40.222530][ T184] ? ttm_bo_init_reserved+0x540/0x540 [ttm] [ 40.223643][ T184] ? __do_sys_finit_module+0x11a/0x1c0 [ 40.224654][ T184] ? __shmem_file_setup+0x102/0x280 [ 40.234764][ T184] drm_gem_vram_create+0x305/0x480 [drm_vram_helper] [ 40.235766][ T184] ? bo_driver_evict_flags+0x340/0x340 [drm_vram_helper] [ 40.236846][ T184] ? __kasan_slab_free+0x108/0x180 [ 40.237650][ T184] drm_gem_vram_fill_create_dumb+0x134/0x340 [drm_vram_helper] [ 40.238864][ T184] ? local_pci_probe+0xdf/0x180 [ 40.239674][ T184] ? drmm_vram_helper_init+0x400/0x400 [drm_vram_helper] [ 40.240826][ T184] drm_client_framebuffer_create+0x19c/0x400 [drm] [ 40.241955][ T184] ? drm_client_buffer_delete+0x200/0x200 [drm] [ 40.243001][ T184] ? drm_client_pick_crtcs+0x554/0xb80 [drm] [ 40.244030][ T184] drm_fb_helper_generic_probe+0x23f/0x940 [drm_kms_helper] [ 40.245226][ T184] ? __cond_resched+0x1c/0xc0 [ 40.245987][ T184] ? drm_fb_helper_memory_range_to_clip+0x180/0x180 [drm_kms_helper] [ 40.247316][ T184] ? mutex_unlock+0x80/0x100 [ 40.248005][ T184] ? __mutex_unlock_slowpath+0x2c0/0x2c0 [ 40.249083][ T184] drm_fb_helper_single_fb_probe+0x907/0xf00 [drm_kms_helper] [ 40.250314][ T184] ? drm_fb_helper_check_var+0x1180/0x1180 [drm_kms_helper] [ 40.251540][ T184] ? __cond_resched+0x1c/0xc0 [ 40.252321][ T184] ? mutex_lock+0x9f/0x100 [ 40.253062][ T184] __drm_fb_helper_initial_config_and_unlock+0xb9/0x2c0 [drm_kms_helper] [ 40.254394][ T184] drm_fbdev_client_hotplug+0x56f/0x840 [drm_kms_helper] [ 40.255477][ T184] drm_fbdev_generic_setup+0x165/0x3c0 [drm_kms_helper] [ 40.256607][ T184] bochs_pci_probe+0x6b7/0x900 [bochs] [ ---truncated---

In the Linux kernel, the following vulnerability has been resolved: wifi: wilc1000: add missing unregister_netdev() in wilc_netdev_ifc_init() Fault injection test reports this issue: kernel BUG at net/core/dev.c:10731! invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI Call Trace: <TASK> wilc_netdev_ifc_init+0x19f/0x220 [wilc1000 884bf126e9e98af6a708f266a8dffd53f99e4bf5] wilc_cfg80211_init+0x30c/0x380 [wilc1000 884bf126e9e98af6a708f266a8dffd53f99e4bf5] wilc_bus_probe+0xad/0x2b0 [wilc1000_spi 1520a7539b6589cc6cde2ae826a523a33f8bacff] spi_probe+0xe4/0x140 really_probe+0x17e/0x3f0 __driver_probe_device+0xe3/0x170 driver_probe_device+0x49/0x120 The root case here is alloc_ordered_workqueue() fails, but cfg80211_unregister_netdevice() or unregister_netdev() not be called in error handling path. To fix add unregister_netdev goto lable to add the unregister operation in error handling path.

In the Linux kernel, the following vulnerability has been resolved: ipv6: prevent NULL dereference in ip6_output() According to syzbot, there is a chance that ip6_dst_idev() returns NULL in ip6_output(). Most places in IPv6 stack deal with a NULL idev just fine, but not here. syzbot reported: general protection fault, probably for non-canonical address 0xdffffc00000000bc: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x00000000000005e0-0x00000000000005e7] CPU: 0 PID: 9775 Comm: syz-executor.4 Not tainted 6.9.0-rc5-syzkaller-00157-g6a30653b604a #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 RIP: 0010:ip6_output+0x231/0x3f0 net/ipv6/ip6_output.c:237 Code: 3c 1e 00 49 89 df 74 08 4c 89 ef e8 19 58 db f7 48 8b 44 24 20 49 89 45 00 49 89 c5 48 8d 9d e0 05 00 00 48 89 d8 48 c1 e8 03 <42> 0f b6 04 38 84 c0 4c 8b 74 24 28 0f 85 61 01 00 00 8b 1b 31 ff RSP: 0018:ffffc9000927f0d8 EFLAGS: 00010202 RAX: 00000000000000bc RBX: 00000000000005e0 RCX: 0000000000040000 RDX: ffffc900131f9000 RSI: 0000000000004f47 RDI: 0000000000004f48 RBP: 0000000000000000 R08: ffffffff8a1f0b9a R09: 1ffffffff1f51fad R10: dffffc0000000000 R11: fffffbfff1f51fae R12: ffff8880293ec8c0 R13: ffff88805d7fc000 R14: 1ffff1100527d91a R15: dffffc0000000000 FS: 00007f135c6856c0(0000) GS:ffff8880b9400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000080 CR3: 0000000064096000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> NF_HOOK include/linux/netfilter.h:314 [inline] ip6_xmit+0xefe/0x17f0 net/ipv6/ip6_output.c:358 sctp_v6_xmit+0x9f2/0x13f0 net/sctp/ipv6.c:248 sctp_packet_transmit+0x26ad/0x2ca0 net/sctp/output.c:653 sctp_packet_singleton+0x22c/0x320 net/sctp/outqueue.c:783 sctp_outq_flush_ctrl net/sctp/outqueue.c:914 [inline] sctp_outq_flush+0x6d5/0x3e20 net/sctp/outqueue.c:1212 sctp_side_effects net/sctp/sm_sideeffect.c:1198 [inline] sctp_do_sm+0x59cc/0x60c0 net/sctp/sm_sideeffect.c:1169 sctp_primitive_ASSOCIATE+0x95/0xc0 net/sctp/primitive.c:73 __sctp_connect+0x9cd/0xe30 net/sctp/socket.c:1234 sctp_connect net/sctp/socket.c:4819 [inline] sctp_inet_connect+0x149/0x1f0 net/sctp/socket.c:4834 __sys_connect_file net/socket.c:2048 [inline] __sys_connect+0x2df/0x310 net/socket.c:2065 __do_sys_connect net/socket.c:2075 [inline] __se_sys_connect net/socket.c:2072 [inline] __x64_sys_connect+0x7a/0x90 net/socket.c:2072 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f

In the Linux kernel, the following vulnerability has been resolved: phy: qcom: qmp-usbc: fix NULL-deref on runtime suspend Commit 413db06c05e7 ("phy: qcom-qmp-usb: clean up probe initialisation") removed most users of the platform device driver data from the qcom-qmp-usb driver, but mistakenly also removed the initialisation despite the data still being used in the runtime PM callbacks. This bug was later reproduced when the driver was copied to create the qmp-usbc driver. Restore the driver data initialisation at probe to avoid a NULL-pointer dereference on runtime suspend. Apparently no one uses runtime PM, which currently needs to be enabled manually through sysfs, with these drivers.

In the Linux kernel, the following vulnerability has been resolved: phy: qcom: qmp-usb: fix NULL-deref on runtime suspend Commit 413db06c05e7 ("phy: qcom-qmp-usb: clean up probe initialisation") removed most users of the platform device driver data, but mistakenly also removed the initialisation despite the data still being used in the runtime PM callbacks. Restore the driver data initialisation at probe to avoid a NULL-pointer dereference on runtime suspend. Apparently no one uses runtime PM, which currently needs to be enabled manually through sysfs, with this driver.

In the Linux kernel, the following vulnerability has been resolved: ipv4: check for NULL idev in ip_route_use_hint() syzbot was able to trigger a NULL deref in fib_validate_source() in an old tree [1]. It appears the bug exists in latest trees. All calls to __in_dev_get_rcu() must be checked for a NULL result. [1] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 2 PID: 3257 Comm: syz-executor.3 Not tainted 5.10.0-syzkaller #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:fib_validate_source+0xbf/0x15a0 net/ipv4/fib_frontend.c:425 Code: 18 f2 f2 f2 f2 42 c7 44 20 23 f3 f3 f3 f3 48 89 44 24 78 42 c6 44 20 27 f3 e8 5d 88 48 fc 4c 89 e8 48 c1 e8 03 48 89 44 24 18 <42> 80 3c 20 00 74 08 4c 89 ef e8 d2 15 98 fc 48 89 5c 24 10 41 bf RSP: 0018:ffffc900015fee40 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff88800f7a4000 RCX: ffff88800f4f90c0 RDX: 0000000000000000 RSI: 0000000004001eac RDI: ffff8880160c64c0 RBP: ffffc900015ff060 R08: 0000000000000000 R09: ffff88800f7a4000 R10: 0000000000000002 R11: ffff88800f4f90c0 R12: dffffc0000000000 R13: 0000000000000000 R14: 0000000000000000 R15: ffff88800f7a4000 FS: 00007f938acfe6c0(0000) GS:ffff888058c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f938acddd58 CR3: 000000001248e000 CR4: 0000000000352ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ip_route_use_hint+0x410/0x9b0 net/ipv4/route.c:2231 ip_rcv_finish_core+0x2c4/0x1a30 net/ipv4/ip_input.c:327 ip_list_rcv_finish net/ipv4/ip_input.c:612 [inline] ip_sublist_rcv+0x3ed/0xe50 net/ipv4/ip_input.c:638 ip_list_rcv+0x422/0x470 net/ipv4/ip_input.c:673 __netif_receive_skb_list_ptype net/core/dev.c:5572 [inline] __netif_receive_skb_list_core+0x6b1/0x890 net/core/dev.c:5620 __netif_receive_skb_list net/core/dev.c:5672 [inline] netif_receive_skb_list_internal+0x9f9/0xdc0 net/core/dev.c:5764 netif_receive_skb_list+0x55/0x3e0 net/core/dev.c:5816 xdp_recv_frames net/bpf/test_run.c:257 [inline] xdp_test_run_batch net/bpf/test_run.c:335 [inline] bpf_test_run_xdp_live+0x1818/0x1d00 net/bpf/test_run.c:363 bpf_prog_test_run_xdp+0x81f/0x1170 net/bpf/test_run.c:1376 bpf_prog_test_run+0x349/0x3c0 kernel/bpf/syscall.c:3736 __sys_bpf+0x45c/0x710 kernel/bpf/syscall.c:5115 __do_sys_bpf kernel/bpf/syscall.c:5201 [inline] __se_sys_bpf kernel/bpf/syscall.c:5199 [inline] __x64_sys_bpf+0x7c/0x90 kernel/bpf/syscall.c:5199

In the Linux kernel, the following vulnerability has been resolved: net: enetc: allocate vf_state during PF probes In the previous implementation, vf_state is allocated memory only when VF is enabled. However, net_device_ops::ndo_set_vf_mac() may be called before VF is enabled to configure the MAC address of VF. If this is the case, enetc_pf_set_vf_mac() will access vf_state, resulting in access to a null pointer. The simplified error log is as follows. root@ls1028ardb:~# ip link set eno0 vf 1 mac 00:0c:e7:66:77:89 [ 173.543315] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004 [ 173.637254] pc : enetc_pf_set_vf_mac+0x3c/0x80 Message from sy [ 173.641973] lr : do_setlink+0x4a8/0xec8 [ 173.732292] Call trace: [ 173.734740] enetc_pf_set_vf_mac+0x3c/0x80 [ 173.738847] __rtnl_newlink+0x530/0x89c [ 173.742692] rtnl_newlink+0x50/0x7c [ 173.746189] rtnetlink_rcv_msg+0x128/0x390 [ 173.750298] netlink_rcv_skb+0x60/0x130 [ 173.754145] rtnetlink_rcv+0x18/0x24 [ 173.757731] netlink_unicast+0x318/0x380 [ 173.761665] netlink_sendmsg+0x17c/0x3c8

In the Linux kernel, the following vulnerability has been resolved: KEYS: trusted: dcp: fix NULL dereference in AEAD crypto operation When sealing or unsealing a key blob we currently do not wait for the AEAD cipher operation to finish and simply return after submitting the request. If there is some load on the system we can exit before the cipher operation is done and the buffer we read from/write to is already removed from the stack. This will e.g. result in NULL pointer dereference errors in the DCP driver during blob creation. Fix this by waiting for the AEAD cipher operation to finish before resuming the seal and unseal calls.

In the Linux kernel, the following vulnerability has been resolved: ASoC: stm32: spdifrx: fix dma channel release in stm32_spdifrx_remove In case of error when requesting ctrl_chan DMA channel, ctrl_chan is not null. So the release of the dma channel leads to the following issue: [ 4.879000] st,stm32-spdifrx 500d0000.audio-controller: dma_request_slave_channel error -19 [ 4.888975] Unable to handle kernel NULL pointer dereference at virtual address 000000000000003d [...] [ 5.096577] Call trace: [ 5.099099] dma_release_channel+0x24/0x100 [ 5.103235] stm32_spdifrx_remove+0x24/0x60 [snd_soc_stm32_spdifrx] [ 5.109494] stm32_spdifrx_probe+0x320/0x4c4 [snd_soc_stm32_spdifrx] To avoid this issue, release channel only if the pointer is valid.

In the Linux kernel, the following vulnerability has been resolved: phy: qcom: qmp-usb-legacy: fix NULL-deref on runtime suspend Commit 413db06c05e7 ("phy: qcom-qmp-usb: clean up probe initialisation") removed most users of the platform device driver data from the qcom-qmp-usb driver, but mistakenly also removed the initialisation despite the data still being used in the runtime PM callbacks. This bug was later reproduced when the driver was copied to create the qmp-usb-legacy driver. Restore the driver data initialisation at probe to avoid a NULL-pointer dereference on runtime suspend. Apparently no one uses runtime PM, which currently needs to be enabled manually through sysfs, with these drivers.

In the Linux kernel, the following vulnerability has been resolved: sched/numa: Fix the potential null pointer dereference in task_numa_work() When running stress-ng-vm-segv test, we found a null pointer dereference error in task_numa_work(). Here is the backtrace: [323676.066985] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020 ...... [323676.067108] CPU: 35 PID: 2694524 Comm: stress-ng-vm-se ...... [323676.067113] pstate: 23401009 (nzCv daif +PAN -UAO +TCO +DIT +SSBS BTYPE=--) [323676.067115] pc : vma_migratable+0x1c/0xd0 [323676.067122] lr : task_numa_work+0x1ec/0x4e0 [323676.067127] sp : ffff8000ada73d20 [323676.067128] x29: ffff8000ada73d20 x28: 0000000000000000 x27: 000000003e89f010 [323676.067130] x26: 0000000000080000 x25: ffff800081b5c0d8 x24: ffff800081b27000 [323676.067133] x23: 0000000000010000 x22: 0000000104d18cc0 x21: ffff0009f7158000 [323676.067135] x20: 0000000000000000 x19: 0000000000000000 x18: ffff8000ada73db8 [323676.067138] x17: 0001400000000000 x16: ffff800080df40b0 x15: 0000000000000035 [323676.067140] x14: ffff8000ada73cc8 x13: 1fffe0017cc72001 x12: ffff8000ada73cc8 [323676.067142] x11: ffff80008001160c x10: ffff000be639000c x9 : ffff8000800f4ba4 [323676.067145] x8 : ffff000810375000 x7 : ffff8000ada73974 x6 : 0000000000000001 [323676.067147] x5 : 0068000b33e26707 x4 : 0000000000000001 x3 : ffff0009f7158000 [323676.067149] x2 : 0000000000000041 x1 : 0000000000004400 x0 : 0000000000000000 [323676.067152] Call trace: [323676.067153] vma_migratable+0x1c/0xd0 [323676.067155] task_numa_work+0x1ec/0x4e0 [323676.067157] task_work_run+0x78/0xd8 [323676.067161] do_notify_resume+0x1ec/0x290 [323676.067163] el0_svc+0x150/0x160 [323676.067167] el0t_64_sync_handler+0xf8/0x128 [323676.067170] el0t_64_sync+0x17c/0x180 [323676.067173] Code: d2888001 910003fd f9000bf3 aa0003f3 (f9401000) [323676.067177] SMP: stopping secondary CPUs [323676.070184] Starting crashdump kernel... stress-ng-vm-segv in stress-ng is used to stress test the SIGSEGV error handling function of the system, which tries to cause a SIGSEGV error on return from unmapping the whole address space of the child process. Normally this program will not cause kernel crashes. But before the munmap system call returns to user mode, a potential task_numa_work() for numa balancing could be added and executed. In this scenario, since the child process has no vma after munmap, the vma_next() in task_numa_work() will return a null pointer even if the vma iterator restarts from 0. Recheck the vma pointer before dereferencing it in task_numa_work().

In the Linux kernel, the following vulnerability has been resolved: iio: light: veml6030: fix IIO device retrieval from embedded device The dev pointer that is received as an argument in the in_illuminance_period_available_show function references the device embedded in the IIO device, not in the i2c client. dev_to_iio_dev() must be used to accessthe right data. The current implementation leads to a segmentation fault on every attempt to read the attribute because indio_dev gets a NULL assignment. This bug has been present since the first appearance of the driver, apparently since the last version (V6) before getting applied. A constant attribute was used until then, and the last modifications might have not been tested again.