Konica Minolta FTP Utility 1.0 contains a buffer overflow vulnerability in the LIST command that allows attackers to overwrite system registers. Attackers can send an oversized buffer of 1500 'A' characters to crash the FTP server and potentially execute unauthorized code.

Adobe Acrobat and Reader versions 2020.006.20034 and earlier, 2017.011.30158 and earlier, 2017.011.30158 and earlier, 2015.006.30510 and earlier, and 2015.006.30510 and earlier have a buffer overflow vulnerability. Successful exploitation could lead to arbitrary code execution .

u'Buffer Overflow in mic calculation for WPA due to copying data into buffer without validating the length of buffer' in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wired Infrastructure and Networking in APQ8098, IPQ5018, IPQ6018, IPQ8074, Kamorta, MSM8998, Nicobar, QCA6390, QCA8081, QCS404, QCS405, QCS605, Rennell, SA415M, Saipan, SC7180, SC8180X, SDA845, SDM630, SDM636, SDM660, SDM670, SDM710, SDM845, SDM850, SM6150, SM7150, SM8150, SM8250, SXR1130

Easy CD & DVD Cover Creator 4.13 contains a buffer overflow vulnerability in the serial number input field that allows attackers to crash the application. Attackers can generate a 6000-byte payload and paste it into the serial number field to trigger an application crash.

Konica Minolta FTP Utility 1.0 contains a buffer overflow vulnerability in the NLST command that allows attackers to overwrite system registers. Attackers can send an oversized buffer of 1500 'A' characters to crash the FTP server and potentially execute unauthorized code.

Possible buffer overflow while parsing mp4 clip with corrupted sample atoms due to improper validation of index in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables in APQ8009, APQ8017, APQ8053, APQ8096AU, APQ8098, Kamorta, MDM9206, MDM9207C, MDM9607, MSM8905, MSM8909W, MSM8917, MSM8920, MSM8937, MSM8940, MSM8953, MSM8996, MSM8996AU, MSM8998, Nicobar, QCA6574AU, QCM2150, QCS405, QCS605, QM215, Rennell, SA6155P, Saipan, SDA660, SDA845, SDM429, SDM429W, SDM439, SDM450, SDM630, SDM632, SDM636, SDM660, SDM670, SDM710, SDM845, SDX20, SM6150, SM7150, SM8150, SM8250, SXR1130, SXR2130

LanSend 3.2 contains a buffer overflow vulnerability in the Add Computers Wizard file import functionality that allows remote attackers to execute arbitrary code. Attackers can craft a malicious payload file to trigger a structured exception handler (SEH) overwrite and execute shellcode when importing computers from a file.

A vulnerability was found in TOTOLINK X15 1.0.0-B20230714.1105. It has been classified as critical. Affected is an unknown function of the file /boafrm/formMapDelDevice of the component HTTP POST Request Handler. The manipulation of the argument macstr leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

u'Remote code execution can happen by sending a carefully crafted POST query when Device configuration is accessed from a tethered client through webserver due to lack of array bound check.' in Snapdragon Auto, Snapdragon Compute, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables, Snapdragon Wired Infrastructure and Networking in APQ8009, APQ8017, APQ8053, APQ8096AU, APQ8098, IPQ4019, IPQ6018, IPQ8064, IPQ8074, MDM9150, MDM9206, MDM9207C, MDM9607, MDM9640, MDM9650, MSM8905, MSM8909W, MSM8953, MSM8996AU, QCA6574AU, QCS405, QCS610, QRB5165, SC8180X, SDA660, SDA845, SDM429, SDM429W, SDM630, SDM632, SDM636, SDM660, SDM845, SDX20, SDX24, SDX55, SM8250

Open Robotics Robotic Operating System 2 (ROS2) and Nav2 humble versions were discovered to contain a buffer overflow via the nav2_amcl process. This vulnerability is triggered via sending a crafted .yaml file.

10-Strike Bandwidth Monitor 3.9 contains a buffer overflow vulnerability that allows attackers to bypass SafeSEH, ASLR, and DEP protections through carefully crafted input. Attackers can exploit the vulnerability by sending a malicious payload to the application's registration key input, enabling remote code execution and launching arbitrary system commands.

StreamRipper32 version 2.6 contains a buffer overflow vulnerability in the Station/Song Section that allows attackers to overwrite memory by manipulating the SongPattern input. Attackers can craft a malicious payload exceeding 256 bytes to potentially execute arbitrary code and compromise the application.

Possible out of bound access while processing assoc response from host due to improper length check before copying into buffer in Snapdragon Auto, Snapdragon Compute, Snapdragon Consumer Electronics Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables in APQ8009, APQ8017, APQ8053, APQ8096AU, MDM9206, MDM9207C, MDM9607, MDM9640, MDM9650, MSM8905, MSM8909W, MSM8917, MSM8920, MSM8937, MSM8940, MSM8953, MSM8996AU, Nicobar, QCA6174A, QCA6574AU, QCA9377, QCA9379, QCM2150, QCN7605, QCS405, QCS605, QM215, SA6155P, Saipan, SC8180X, SDA845, SDM429, SDM429W, SDM439, SDM450, SDM630, SDM632, SDM636, SDM660, SDM845, SDX20, SDX55, SM6150, SM7150, SM8150, SM8250, SXR2130

BearShare Lite 5.2.5 contains a buffer overflow vulnerability in the Advanced Search keywords input that allows attackers to execute arbitrary code. Attackers can craft a specially designed payload to overwrite the EIP register and execute shellcode by pasting malicious content into the search keywords field.

Remote Desktop Audit 2.3.0.157 contains a buffer overflow vulnerability that allows attackers to execute arbitrary code during the Add Computers Wizard file import process. Attackers can craft a malicious payload file to trigger a structured exception handler (SEH) bypass and execute shellcode when importing computer lists.

u'Possible buffer overflow while updating output buffer for IMEI and Gateway Address due to lack of check of input validation for parameters received from server' in Snapdragon Auto, Snapdragon Compute, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile in Agatti, Kamorta, Nicobar, QCM6125, QCS610, Rennell, SA415M, Saipan, SC7180, SC8180X, SDX24, SDX55, SM6150, SM7150, SM8150, SM8250, SXR2130

CloudMe 1.11.2 contains a buffer overflow vulnerability that allows remote attackers to execute arbitrary code through crafted network packets. Attackers can exploit the vulnerability by sending a specially crafted payload to the CloudMe service running on port 8888, enabling remote code execution.

Open Robotics Robotic Operating System 2 (ROS2) and Nav2 humble versions were discovered to contain a buffer overflow via the nav2_amcl process. This vulnerability is triggered via sending a crafted .yaml file.

Certain NETGEAR devices are affected by a buffer overflow by an unauthenticated attacker. This affects CBR40 before 2.5.0.10, D6220 before 1.0.0.60, D6400 before 1.0.0.94, D7000v2 before 1.0.0.62, D8500 before 1.0.3.50, DC112A before 1.0.0.48, DGN2200v4 before 1.0.0.114, EAX20 before 1.0.0.36, EAX80 before 1.0.1.62, EX3700 before 1.0.0.84, EX3800 before 1.0.0.84, EX3920 before 1.0.0.84, EX6000 before 1.0.0.44, EX6100 before 1.0.2.28, EX6120 before 1.0.0.54, EX6130 before 1.0.0.36, EX6150 before 1.0.0.46, EX6200 before 1.0.3.94, EX6920 before 1.0.0.54, EX7000 before 1.0.1.90, EX7500 before 1.0.0.68, MK62 before 1.0.5.102, MR60 before 1.0.5.102, MS60 before 1.0.5.102, R6250 before 1.0.4.42, R6300v2 before 1.0.4.42, R6400 before 1.0.1.62, R6400v2 before 1.0.4.98, R6700v3 before 1.0.4.98, R6700 before 1.0.2.16, R6900P before 1.3.2.124, R6900 before 1.0.2.16, R7000 before 1.0.11.106, R7000P before 1.3.2.124, R7100LG before 1.0.0.56, R7850 before 1.0.5.60, R7900 before 1.0.4.26, R7900P before 1.4.1.62, R7960P before 1.4.1.62, R8000 before 1.0.4.58, R8000P before 1.4.1.62, R8300 before 1.0.2.134, R8500 before 1.0.2.134, RAX15 before 1.0.1.64, RAX20 before 1.0.1.64, RAX200 before 1.0.2.102, RAX45 before 1.0.2.32, RAX50 before 1.0.2.32, RAX75 before 1.0.3.102, RAX80 before 1.0.3.102, RBK752 before 3.2.16.6, RBR750 before 3.2.16.6, RBS750 before 3.2.16.6, RBK842 before 3.2.16.6, RBR840 before 3.2.16.6, RBS840 before 3.2.16.6, RBK852 before 3.2.16.6, RBR850 before 3.2.16.6, RBS850 before 3.2.16.6, RBS40V-200 before 1.0.0.46, RBW30 before 2.5.0.4, RS400 before 1.5.0.48, WN2500RPv2 before 1.0.1.56, WN3500RP before 1.0.0.28, WNDR3400v3 before 1.0.1.32, WNR1000v3 before 1.0.2.78, WNR2000v2 before 1.2.0.12, WNR3500Lv2 before 1.2.0.62, and XR300 before 1.0.3.50.

uev (aka libuev) before 2.4.1 has a buffer overflow in epoll_wait if maxevents is a large number.

A buffer overflow vulnerability in the URL parser of the zhttpd web server in Zyxel VMG8825-T50K firmware versions prior to V5.50(ABOM.5)C0 could allow an unauthenticated attacker to cause denial-of-service (DoS) conditions and potentially execute arbitrary code by sending a specially crafted HTTP request.

An issue was discovered in MBed OS 6.16.0. When parsing hci reports, the hci parsing software dynamically determines the length of a list of reports by reading a byte from an input stream. It then fetches the length of the first report, uses it to calculate the beginning of the second report, etc. In doing this, it tracks the largest report so it can later allocate a buffer that fits every individual report (but only one at a time). It does not, however, validate that these addresses are all contained within the buffer passed to hciEvtProcessLeExtAdvReport. It is then possible, though unlikely, that the buffer designated to hold the reports is allocated in such a way that one of these out-of-bounds length fields is contained within the new buffer. When the (n-1)th report is copied, it overwrites the length field of the nth report. This now corrupted length field is then used for a memcpy into the new buffer, which may lead to a buffer overflow.

An issue was discovered in the arr crate through 2020-08-25 for Rust. There is a buffer overflow in Index and IndexMut.

Possible buffer overflow while copying the frame to local buffer due to lack of check of length before copying in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer Electronics Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon IoT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables, Snapdragon Wired Infrastructure and Networking in APQ8009, APQ8017, APQ8053, APQ8076, APQ8096, APQ8096AU, APQ8098, IPQ6018, IPQ8074, MDM9206, MDM9207C, MDM9607, MDM9640, MDM9650, MSM8905, MSM8909, MSM8909W, MSM8917, MSM8920, MSM8937, MSM8940, MSM8953, MSM8996AU, MSM8998, Nicobar, QCA6174A, QCA6574AU, QCA6584AU, QCA9377, QCA9379, QCA9886, QCM2150, QCS405, QCS605, QM215, Rennell, SC7180, SC8180X, SDM429, SDM429W, SDM439, SDM450, SDM630, SDM632, SDM636, SDM660, SDM670, SDM710, SDM845, SDX20, SDX24, SM6150, SM7150, SM8150, SXR1130

Certain NETGEAR devices are affected by a buffer overflow by an unauthenticated attacker. This affects RAX40 before 1.0.2.60, RAX35 before 1.0.2.60, R6400v2 before 1.0.4.122, R6700v3 before 1.0.4.122, R6900P before 1.3.3.152, R7000P before 1.3.3.152, R7000 before 1.0.11.136, R7960P before 1.4.4.94, and R8000P before 1.4.4.94.

The Nintendo NetworkBuffer class, as used in Animal Crossing: New Horizons before 2.0.6 and other products, allows remote attackers to execute arbitrary code via a large UDP packet that causes a buffer overflow, aka ENLBufferPwn. The victim must join a game session with the attacker. Other affected products include Mario Kart 7 before 1.2, Mario Kart 8, Mario Kart 8 Deluxe before 2.1.0, ARMS before 5.4.1, Splatoon, Splatoon 2 before 5.5.1, Splatoon 3 before late 2022, Super Mario Maker 2 before 3.0.2, and Nintendo Switch Sports before late 2022.

TOTOLINK A3700R V9.1.2u.6165_20211012 was discovered to contain a stack overflow via ssid5g in the function setWizardCfg.

TOTOLINK A3700R V9.1.2u.6165_20211012 was discovered to contain a stack overflow via ssid in the function setWiFiBasicCfg

Buffer Overflow Vulnerability in D-Link DIR-825 v1.33.0.44ebdd4-embedded and below allows attacker to execute arbitrary code via the GetConfig method to the /CPE endpoint.

Certain NETGEAR devices are affected by a buffer overflow by an unauthenticated attacker. This affects AC2100 before 1.2.0.72, AC2400 before 1.2.0.72, AC2600 before 1.2.0.72, CBK40 before 2.5.0.10, CBR40 before 2.5.0.10, D7800 before 1.0.1.58, EAX20 before 1.0.0.36, EAX80 before 1.0.1.62, EX7500 before 1.0.0.68, MK62 before 1.0.5.102, MR60 before 1.0.5.102, MS60 before 1.0.5.102, R6120 before 1.0.0.70, R6220 before 1.1.0.100, R6230 before 1.1.0.100, R6260 before 1.1.0.76, R6330 before 1.1.0.76, R6350 before 1.1.0.76, R6400 before 1.0.1.62, R6400v2 before 1.0.4.98, R6700 before 1.0.2.16, R6700v2 before 1.2.0.72, R6700v3 before 1.0.4.98, R6800 before 1.2.0.72, R6850 before 1.1.0.76, R6900P before 1.3.2.124, R6900 before 1.0.2.16, R6900v2 before 1.2.0.72, R7000 before 1.0.11.106, R7000P before 1.3.2.124, R7200 before 1.2.0.72, R7350 before 1.2.0.72, R7400 before 1.2.0.72, R7450 before 1.2.0.72, R7800 before 1.0.2.74, R7850 before 1.0.5.60, R7900 before 1.0.4.26, R7900P before 1.4.1.62, R7960P before 1.4.1.62, R8000 before 1.0.4.58, R8000P before 1.4.1.62, R8900 before 1.0.5.24, R9000 before 1.0.5.24, RAX120 before 1.0.1.136, RAX15 before 1.0.1.64, RAX20 before 1.0.1.64, RAX200 before 1.0.2.102, RAX45 before 1.0.2.64, RAX50 before 1.0.2.64, RAX75 before 1.0.3.102, RAX80 before 1.0.3.102, RBK12 before 2.6.1.44, RBR10 before 2.6.1.44, RBS10 before 2.6.1.44, RBK20 before 2.6.1.38, RBR20 before 2.6.1.36, RBS20 before 2.6.1.38, RBK40 before 2.6.1.38, RBR40 before 2.6.1.36, RBS40 before 2.6.1.38, RBK50 before 2.6.1.40, RBR50 before 2.6.1.40, RBS50 before 2.6.1.40, RBK752 before 3.2.16.6, RBR750 before 3.2.16.6, RBS750 before 3.2.16.6, RBK752 before 3.2.16.6, RBR750 before 3.2.16.6, RBS750 before 3.2.16.6, RBK842 before 3.2.16.6, RBR840 before 3.2.16.6, RBS840 before 3.2.16.6, RBK852 before 3.2.16.6, RBR850 before 3.2.16.6, RBS850 before 3.2.16.6, RS400 before 1.5.0.48, XR300 before 1.0.3.50, XR450 before 2.3.2.66, XR500 before 2.3.2.66, and XR700 before 1.0.1.34.

IP-COM M50 V15.11.0.33(10768) was discovered to contain a buffer overflow via the picName parameter in the formDelWewifiPic function.

IP-COM M50 V15.11.0.33(10768) was discovered to contain a buffer overflow via the gotoUrl parameter in the formPortalAuth function.

IP-COM M50 V15.11.0.33(10768) was discovered to contain multiple buffer overflows via the ip, mac, and remark parameters in the formIPMacBindModify function.

webfsd 1.21 is vulnerable to a Buffer Overflow via a crafted request. This is due to the filename variable

IP-COM M50 V15.11.0.33(10768) was discovered to contain a buffer overflow via the indexSet parameter in the formIPMacBindDel function.

IP-COM M50 V15.11.0.33(10768) was discovered to contain a buffer overflow via the hostname parameter in the formSetNetCheckTools function.

IP-COM M50 V15.11.0.33(10768) was discovered to contain a buffer overflow via the indexSet parameter in the formQOSRuleDel function.

IP-COM M50 V15.11.0.33(10768) was discovered to contain multiple buffer overflows via the pLanPortRange and pWanPortRange parameters in the formSetPortMapping function.

ASUS RT-AX86U router firmware below version under 9.0.0.4_386 has a buffer overflow in the blocking_request.cgi function of the httpd module that can cause code execution when an attacker constructs malicious data.

A LoadLibraryEX vulnerability in Trend Micro Apex Central could allow an unauthenticated remote attacker to load an attacker-controlled DLL into a key executable, leading to execution of attacker-supplied code under the context of SYSTEM on affected installations.

IP-COM M50 V15.11.0.33(10768) was discovered to contain a buffer overflow via the rules parameter in the formAddDnsForward function.

IP-COM M50 V15.11.0.33(10768) was discovered to contain multiple buffer overflows via the pEnable, pLevel, and pModule parameters in the formSetDebugCfg function.

IP-COM M50 V15.11.0.33(10768) was discovered to contain a buffer overflow via the sPortMapIndex parameter in the formDelPortMapping function.

IP-COM M50 V15.11.0.33(10768) was discovered to contain a buffer overflow via the rules parameter in the formAddDnsHijack function.

A buffer overflow vulnerability exists in the login.cgi Goto_chidx() functionality of Wavlink AC3000 M33A8.V5030.210505. A specially crafted HTTP request can lead to stack-based buffer overflow. An attacker can make an unauthenticated HTTP request to trigger this vulnerability.

TOTOLINK A950RG V4.1.2cu.5204_B20210112 contains a buffer overflow vulnerability in the setUrlFilterRules interface of /lib/cste_modules/firewall.so. The vulnerability occurs because the `url` parameter is not properly validated for length, allowing remote attackers to trigger a buffer overflow, potentially leading to arbitrary code execution or denial of service.

A buffer overflow vulnerability exists in TOTOLINK A950RG V4.1.2cu.5204_B20210112. The issue resides in the setRadvdCfg interface of the /lib/cste_modules/ipv6.so module. The function fails to properly validate the length of the user-controlled radvdinterfacename parameter, allowing remote attackers to trigger a stack buffer overflow.

Capstone is a disassembly framework. In versions 6.0.0-Alpha5 and prior, an unchecked vsnprintf return in SStream_concat lets a malicious cs_opt_mem.vsnprintf drive SStream’s index negative or past the end, leading to a stack buffer underflow/overflow when the next write occurs. Commit 2c7797182a1618be12017d7d41e0b6581d5d529e fixes the issue.