An issue has been discovered in GitLab CE/EE affecting all versions starting from 14.0 before 15.6.7, all versions starting from 15.7 before 15.7.6, all versions starting from 15.8 before 15.8.1. It was possible to trigger a DoS attack by uploading a malicious Helm chart.

In PHP 8.0.X before 8.0.28, 8.1.X before 8.1.16 and 8.2.X before 8.2.3, excessive number of parts in HTTP form upload can cause high resource consumption and excessive number of log entries. This can cause denial of service on the affected server by exhausting CPU resources or disk space.

When MELSOFT transmission port (UDP/IP) of Mitsubishi Electric MELSEC iQ-R series (all versions), MELSEC iQ-F series (all versions), MELSEC Q series (all versions), MELSEC L series (all versions), and MELSEC F series (all versions) receives massive amount of data via unspecified vectors, resource consumption occurs and the port does not process the data properly. As a result, it may fall into a denial-of-service (DoS) condition. The vendor states this vulnerability only affects Ethernet communication functions.

User-controlled operations could have allowed Denial of Service in M-Files Server before 23.4.12528.1 due to uncontrolled memory consumption for a scheduled job.

Dell EMC Isilon OneFS versions 8.2.2 and earlier contain a denial of service vulnerability. SmartConnect had an error condition that may be triggered to loop, using CPU and potentially preventing other SmartConnect DNS responses.

An issue was discovered in Iglu Server 0.13.0 and below. It involves sending very large payloads to a particular API endpoint of Iglu Server and can render it completely unresponsive. If the operation of Iglu Server is not restored, event processing in the pipeline would eventually halt.

In Eclipse Jetty, versions <=9.4.57, <=10.0.25, <=11.0.25, <=12.0.21, <=12.1.0.alpha2, an HTTP/2 client may trigger the server to send RST_STREAM frames, for example by sending frames that are malformed or that should not be sent in a particular stream state, therefore forcing the server to consume resources such as CPU and memory. For example, a client can open a stream and then send WINDOW_UPDATE frames with window size increment of 0, which is illegal. Per specification https://www.rfc-editor.org/rfc/rfc9113.html#name-window_update , the server should send a RST_STREAM frame. The client can now open another stream and send another bad WINDOW_UPDATE, therefore causing the server to consume more resources than necessary, as this case does not exceed the max number of concurrent streams, yet the client is able to create an enormous amount of streams in a short period of time. The attack can be performed with other conditions (for example, a DATA frame for a closed stream) that cause the server to send a RST_STREAM frame. Links: * https://github.com/jetty/jetty.project/security/advisories/GHSA-mmxm-8w33-wc4h

A vulnerability has been found in OmniSharp csharp-language-server-protocol up to 0.19.6 and classified as problematic. This vulnerability affects the function CreateSerializerSettings of the file src/JsonRpc/Serialization/SerializerBase.cs of the component JSON Serializer. The manipulation leads to resource consumption. Upgrading to version 0.19.7 is able to address this issue. The patch is identified as 7fd2219f194a9ef2a8901bb131c5fa12272305ce. It is recommended to upgrade the affected component. VDB-234238 is the identifier assigned to this vulnerability.

Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to 7.0.5 and 6.0.19, a small amount of HTTP/2 traffic can lead to Suricata using a large amount of memory. The issue has been addressed in Suricata 7.0.5 and 6.0.19. Workarounds include disabling the HTTP/2 parser and reducing `app-layer.protocols.http2.max-table-size` value (default is 65536).

IBM MQ Internet Pass-Thru 2.1 and 9.2 could allow a remote user to cause a denial of service by sending malformed MQ data requests which would consume all available resources. IBM X-Force ID: 188093.

A buffer overflow vulnerability has been discovered in Netis WF2880 v2.1.40207 in the FUN_00470c50 function of the cgitest.cgi file. Attackers can trigger this vulnerability by controlling the value of wl_mac_filter_set in the payload, which can cause the program to crash and lead to a Denial of Service (DoS) attack.

Improper input validation in GROWI versions prior to v4.2.3 (v4.2 Series), GROWI versions prior to v4.1.12 (v4.1 Series), and GROWI v3 series and earlier GROWI versions prior to v4.2.3 (v4.2 Series), GROWI versions prior to v4.1.12 (v4.1 Series), and GROWI v3 series and earlier allows remote attackers to cause a denial of service via unspecified vectors.

Remote prevention of access to cellular service with no user interaction (for example, crashing the cellular radio service with a malformed packet)

In Eclipse Jetty version 9.3.x and 9.4.x, the server is vulnerable to Denial of Service conditions if a remote client sends either large SETTINGs frames container containing many settings, or many small SETTINGs frames. The vulnerability is due to the additional CPU and memory allocations required to handle changed settings.

An issue in Yonganda YAD-LOJ V3.0.561 allows a remote attacker to cause a denial of service via a crafted packet.

A lack of rate limiting in the "Login Section, Forgot Email" feature of PHPJabbers Hotel Booking System v4.0 allows attackers to send an excessive amount of reset requests for a legitimate user, leading to a possible Denial of Service (DoS) via a large amount of generated e-mail messages.

Control de Ciber, in its 1.650 version, is affected by a Denial of Service condition through the version function. Sending a malicious request could cause the server to check if an unrecognized component is up to date, causing a memory failure error that shuts down the process.

vLLM is an inference and serving engine for large language models (LLMs). From 0.1.0 to before 0.10.1.1, a Denial of Service (DoS) vulnerability can be triggered by sending a single HTTP GET request with an extremely large header to an HTTP endpoint. This results in server memory exhaustion, potentially leading to a crash or unresponsiveness. The attack does not require authentication, making it exploitable by any remote user. This vulnerability is fixed in 0.10.1.1.

A vulnerability was found in zstd v1.4.10, where an attacker can supply empty string as an argument to the command line tool to cause buffer overrun.

In the Linux kernel, the following vulnerability has been resolved: net: bridge: vlan: fix memory leak in __allowed_ingress When using per-vlan state, if vlan snooping and stats are disabled, untagged or priority-tagged ingress frame will go to check pvid state. If the port state is forwarding and the pvid state is not learning/forwarding, untagged or priority-tagged frame will be dropped but skb memory is not freed. Should free skb when __allowed_ingress returns false.

Uncontrolled resource consumption in certain Zoom Workplace Clients may allow an unauthenticated user to conduct a denial of service via network access.

Node.js: All versions prior to Node.js 6.15.0, 8.14.0, 10.14.0 and 11.3.0: Slowloris HTTP Denial of Service: An attacker can cause a Denial of Service (DoS) by sending headers very slowly keeping HTTP or HTTPS connections and associated resources alive for a long period of time.

Denial of Service in GitHub repository usememos/memos prior to 0.9.1.

The secure OS module has configuration defects. Successful exploitation of this vulnerability may affect availability.

On versions 15.0.0-15.0.1.1, 14.0.0-14.1.2.2, 13.1.0-13.1.3.1, 12.1.0-12.1.5, and 11.5.2-11.6.5.1, the BIG-IP ASM system may consume excessive resources when processing certain types of HTTP responses from the origin web server. This vulnerability is only known to affect resource-constrained systems in which the security policy is configured with response-side features, such as Data Guard or response-side learning.

A vulnerability has been identified in SCALANCE X204RNA (HSR) (All versions < V3.2.7), SCALANCE X204RNA (PRP) (All versions < V3.2.7), SCALANCE X204RNA EEC (HSR) (All versions < V3.2.7), SCALANCE X204RNA EEC (PRP) (All versions < V3.2.7), SCALANCE X204RNA EEC (PRP/HSR) (All versions < V3.2.7). Specially crafted PROFINET DCP packets could cause a denial of service condition of affected products.

Uncontrolled resource consumption in Windows Netlogon allows an unauthorized attacker to deny service over a network.

ESI plugin does not have the limit for maximum inclusion depth, and that allows excessive memory consumption if malicious instructions are inserted. Users can use a new setting for the plugin (--max-inclusion-depth) to limit it. This issue affects Apache Traffic Server: from 10.0.0 through 10.0.5, from 9.0.0 through 9.2.10. Users are recommended to upgrade to version 9.2.11 or 10.0.6, which fixes the issue.

A lack of rate limiting in pjActionAJaxSend in Time Slots Booking Calendar 4.0 allows attackers to cause resource exhaustion.

CXF supports (via JwtRequestCodeFilter) passing OAuth 2 parameters via a JWT token as opposed to query parameters (see: The OAuth 2.0 Authorization Framework: JWT Secured Authorization Request (JAR)). Instead of sending a JWT token as a "request" parameter, the spec also supports specifying a URI from which to retrieve a JWT token from via the "request_uri" parameter. CXF was not validating the "request_uri" parameter (apart from ensuring it uses "https) and was making a REST request to the parameter in the request to retrieve a token. This means that CXF was vulnerable to DDos attacks on the authorization server, as specified in section 10.4.1 of the spec. This issue affects Apache CXF versions prior to 3.4.3; Apache CXF versions prior to 3.3.10.

The ProfileSDK has defects introduced in the design process. Successful exploitation of this vulnerability may affect system availability.

An issue was discovered in Samsung Mobile Processor, Wearable Processor, and Modem Exynos 2100, 1280, 2200, 1330, 1380, 1480, 9110, Modem 5123. Mishandling of an 5G NRMM packet leads to a Denial of Service.

Bitcoin SV before 0.1.1 allows uncontrolled resource consumption when receiving messages with invalid checksums.

Pexip Infinity before 18 allows remote Denial of Service (XML parsing).

aaugustin websockets version 4 contains a CWE-409: Improper Handling of Highly Compressed Data (Data Amplification) vulnerability in Servers and clients, unless configured with compression=None that can result in Denial of Service by memory exhaustion. This attack appear to be exploitable via Sending a specially crafted frame on an established connection. This vulnerability appears to have been fixed in 5.

Pexip Infinity before 18 allows Remote Denial of Service (TLS handshakes in RTMP).

Bitcoin SV before 0.1.1 allows uncontrolled resource consumption when deserializing transactions.

Bitcoin SV before 0.1.1 allows uncontrolled resource consumption when receiving sendheaders messages.

Marked is an open-source markdown parser and compiler (npm package "marked"). In marked from version 1.1.1 and before version 2.0.0, there is a Regular expression Denial of Service vulnerability. This vulnerability can affect anyone who runs user generated code through marked. This vulnerability is fixed in version 2.0.0.

In onHeaderDecoded of LocalImageResolver.java, there is a possible persistent denial of service due to resource exhaustion. This could lead to remote denial of service with no additional execution privileges needed. User interaction is not needed for exploitation.

A vulnerability has been identified in SIPROTEC 5 6MD84 (CP300) (All versions < V9.50), SIPROTEC 5 6MD85 (CP200) (All versions), SIPROTEC 5 6MD85 (CP300) (All versions < V9.50), SIPROTEC 5 6MD86 (CP200) (All versions), SIPROTEC 5 6MD86 (CP300) (All versions < V9.50), SIPROTEC 5 6MD89 (CP300) (All versions < V9.64), SIPROTEC 5 6MU85 (CP300) (All versions < V9.50), SIPROTEC 5 7KE85 (CP200) (All versions), SIPROTEC 5 7KE85 (CP300) (All versions < V9.64), SIPROTEC 5 7SA82 (CP100) (All versions < V8.90), SIPROTEC 5 7SA82 (CP150) (All versions < V9.50), SIPROTEC 5 7SA84 (CP200) (All versions), SIPROTEC 5 7SA86 (CP200) (All versions), SIPROTEC 5 7SA86 (CP300) (All versions < V9.50), SIPROTEC 5 7SA87 (CP200) (All versions), SIPROTEC 5 7SA87 (CP300) (All versions < V9.50), SIPROTEC 5 7SD82 (CP100) (All versions < V8.90), SIPROTEC 5 7SD82 (CP150) (All versions < V9.50), SIPROTEC 5 7SD84 (CP200) (All versions), SIPROTEC 5 7SD86 (CP200) (All versions), SIPROTEC 5 7SD86 (CP300) (All versions < V9.50), SIPROTEC 5 7SD87 (CP200) (All versions), SIPROTEC 5 7SD87 (CP300) (All versions < V9.50), SIPROTEC 5 7SJ81 (CP100) (All versions < V8.89), SIPROTEC 5 7SJ81 (CP150) (All versions < V9.50), SIPROTEC 5 7SJ82 (CP100) (All versions < V8.89), SIPROTEC 5 7SJ82 (CP150) (All versions < V9.50), SIPROTEC 5 7SJ85 (CP200) (All versions), SIPROTEC 5 7SJ85 (CP300) (All versions < V9.50), SIPROTEC 5 7SJ86 (CP200) (All versions), SIPROTEC 5 7SJ86 (CP300) (All versions < V9.50), SIPROTEC 5 7SK82 (CP100) (All versions < V8.89), SIPROTEC 5 7SK82 (CP150) (All versions < V9.50), SIPROTEC 5 7SK85 (CP200) (All versions), SIPROTEC 5 7SK85 (CP300) (All versions < V9.50), SIPROTEC 5 7SL82 (CP100) (All versions < V8.90), SIPROTEC 5 7SL82 (CP150) (All versions < V9.50), SIPROTEC 5 7SL86 (CP200) (All versions), SIPROTEC 5 7SL86 (CP300) (All versions < V9.50), SIPROTEC 5 7SL87 (CP200) (All versions), SIPROTEC 5 7SL87 (CP300) (All versions < V9.50), SIPROTEC 5 7SS85 (CP200) (All versions), SIPROTEC 5 7SS85 (CP300) (All versions < V9.50), SIPROTEC 5 7ST85 (CP200) (All versions), SIPROTEC 5 7ST85 (CP300) (All versions < V9.64), SIPROTEC 5 7ST86 (CP300) (All versions < V9.64), SIPROTEC 5 7SX82 (CP150) (All versions < V9.50), SIPROTEC 5 7SX85 (CP300) (All versions < V9.50), SIPROTEC 5 7UM85 (CP300) (All versions < V9.50), SIPROTEC 5 7UT82 (CP100) (All versions < V8.90), SIPROTEC 5 7UT82 (CP150) (All versions < V9.50), SIPROTEC 5 7UT85 (CP200) (All versions), SIPROTEC 5 7UT85 (CP300) (All versions < V9.50), SIPROTEC 5 7UT86 (CP200) (All versions), SIPROTEC 5 7UT86 (CP300) (All versions < V9.50), SIPROTEC 5 7UT87 (CP200) (All versions), SIPROTEC 5 7UT87 (CP300) (All versions < V9.50), SIPROTEC 5 7VE85 (CP300) (All versions < V9.50), SIPROTEC 5 7VK87 (CP200) (All versions), SIPROTEC 5 7VK87 (CP300) (All versions < V9.50), SIPROTEC 5 7VU85 (CP300) (All versions < V9.50), SIPROTEC 5 Communication Module ETH-BA-2EL (Rev.1) (All versions installed on CP200 devices), SIPROTEC 5 Communication Module ETH-BA-2EL (Rev.1) (All versions < V9.50 installed on CP150 and CP300 devices), SIPROTEC 5 Communication Module ETH-BA-2EL (Rev.1) (All versions < V8.89 installed on CP100 devices), SIPROTEC 5 Communication Module ETH-BB-2FO (Rev. 1) (All versions installed on CP200 devices), SIPROTEC 5 Communication Module ETH-BB-2FO (Rev. 1) (All versions < V9.50 installed on CP150 and CP300 devices), SIPROTEC 5 Communication Module ETH-BB-2FO (Rev. 1) (All versions < V8.89 installed on CP100 devices), SIPROTEC 5 Communication Module ETH-BD-2FO (All versions < V9.50), SIPROTEC 5 Compact 7SX800 (CP050) (All versions < V9.50). Affected devices do not properly restrict secure client-initiated renegotiations within the SSL and TLS protocols. This could allow an attacker to create a denial of service condition on the ports 443/tcp and 4443/tcp for the duration of the attack.

Discourse is an open-source discussion platform. Prior to version 3.4.4 of the `stable` branch, version 3.5.0.beta5 of the `beta` branch, and version 3.5.0.beta6-dev of the `tests-passed` branch, sending a malicious URL in a PM to a bot user can cause a reduced the availability of a Discourse instance. This issue is patched in version 3.4.4 of the `stable` branch, version 3.5.0.beta5 of the `beta` branch, and version 3.5.0.beta6-dev of the `tests-passed` branch. No known workarounds are available.

A vulnerability in Apache IoTDB. This issue affects Apache IoTDB: from 1.3.3 through 1.3.4, from 2.0.1-beta through 2.0.4. Users are recommended to upgrade to version 2.0.5, which fixes the issue.

Certain HP ENVY, OfficeJet, and DeskJet printers may be vulnerable to a Denial of Service attack.

Uncontrolled resource consumption vulnerability in Cybozu Remote Service 4.0.0 to 4.0.3 allows a remote authenticated attacker to consume huge storage space, which may result in a denial-of-service (DoS) condition.

There is a denial of service vulnerability in the Content-Disposition parsingcomponent of Rack fixed in 2.0.9.2, 2.1.4.2, 2.2.4.1, 3.0.0.1. This could allow an attacker to craft an input that can cause Content-Disposition header parsing in Rackto take an unexpected amount of time, possibly resulting in a denial ofservice attack vector. This header is used typically used in multipartparsing. Any applications that parse multipart posts using Rack (virtuallyall Rails applications) are impacted.

IBM Security Verify Access OIDC Provider could allow a remote user to cause a denial of service due to uncontrolled resource consumption. IBM X-Force ID: 238921.

Apache IoTDB version 0.12.2 to 0.12.6, 0.13.0 to 0.13.2 are vulnerable to a Denial of Service attack when accepting untrusted patterns for REGEXP queries with Java 8. Users should upgrade to 0.13.3 which addresses this issue or use a later version of Java to avoid it.

On Juniper Networks SRX Series devices with link aggregation (lag) configured, executing any operation that fetches Aggregated Ethernet (AE) interface statistics, including but not limited to SNMP GET requests, causes a slow kernel memory leak. If all the available memory is consumed, the traffic will be impacted and a reboot might be required. The following log can be seen if this issue happens. /kernel: rt_pfe_veto: Memory over consumed. Op 1 err 12, rtsm_id 0:-1, msg type 72 /kernel: rt_pfe_veto: free kmem_map memory = (20770816) curproc = kmd An administrator can use the following CLI command to monitor the status of memory consumption (ifstat bucket): user@device > show system virtual-memory no-forwarding | match ifstat Type InUse MemUse HighUse Limit Requests Limit Limit Size(s) ifstat 2588977 162708K - 19633958 <<<< user@device > show system virtual-memory no-forwarding | match ifstat Type InUse MemUse HighUse Limit Requests Limit Limit Size(s) ifstat 3021629 189749K - 22914415 <<<< This issue affects Juniper Networks Junos OS on SRX Series: 17.1 versions 17.1R3 and above prior to 17.3R3-S11; 17.4 versions prior to 17.4R3-S5; 18.2 versions prior to 18.2R3-S7, 18.2R3-S8; 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R2-S7, 18.4R3-S6; 19.1 versions prior to 19.1R3-S4; 19.2 versions prior to 19.2R1-S6; 19.3 versions prior to 19.3R3-S1; 19.4 versions prior to 19.4R3-S1; 20.1 versions prior to 20.1R2, 20.1R3; 20.2 versions prior to 20.2R2-S2, 20.2R3; 20.3 versions prior to 20.3R1-S2, 20.3R2. This issue does not affect Juniper Networks Junos OS prior to 17.1R3.

There is a code-related vulnerability in the GoldenDB database product. Attackers can access system tables to disrupt the normal operation of business SQL.