A memory leak in the gs_can_open() function in drivers/net/can/usb/gs_usb.c in the Linux kernel before 5.3.11 allows attackers to cause a denial of service (memory consumption) by triggering usb_submit_urb() failures, aka CID-fb5be6a7b486.

xmlParseBalancedChunkMemoryRecover in parser.c in libxml2 before 2.9.10 has a memory leak related to newDoc->oldNs.

A memory leak in the rpmsg_eptdev_write_iter() function in drivers/rpmsg/rpmsg_char.c in the Linux kernel through 5.3.11 allows attackers to cause a denial of service (memory consumption) by triggering copy_from_iter_full() failures, aka CID-bbe692e349e2.

HuffmanTree_makeFromFrequencies in lodepng.c in LodePNG through 2019-09-28, as used in WinPR in FreeRDP and other products, has a memory leak because a supplied realloc pointer (i.e., the first argument to realloc) is also used for a realloc return value.

A memory leak in the sof_dfsentry_write() function in sound/soc/sof/debug.c in the Linux kernel through 5.3.9 allows attackers to cause a denial of service (memory consumption), aka CID-c0a333d842ef.

libfreerdp/codec/region.c in FreeRDP through 1.1.x and 2.x through 2.0.0-rc4 has memory leaks because a supplied realloc pointer (i.e., the first argument to realloc) is also used for a realloc return value.

Two memory leaks in the sja1105_static_config_upload() function in drivers/net/dsa/sja1105/sja1105_spi.c in the Linux kernel before 5.3.5 allow attackers to cause a denial of service (memory consumption) by triggering static_config_buf_prepare_for_upload() or sja1105_inhibit_tx() failures, aka CID-68501df92d11.

A memory leak in the komeda_wb_connector_add() function in drivers/gpu/drm/arm/display/komeda/komeda_wb_connector.c in the Linux kernel before 5.3.8 allows attackers to cause a denial of service (memory consumption) by triggering drm_writeback_connector_init() failures, aka CID-a0ecd6fdbf5d.

A memory leak in the dwc3_pci_probe() function in drivers/usb/dwc3/dwc3-pci.c in the Linux kernel through 5.3.9 allows attackers to cause a denial of service (memory consumption) by triggering platform_device_add_properties() failures, aka CID-9bbfceea12a8.

GPAC version 2.3-DEV-rev602-ged8424300-master in MP4Box contains a memory leak in NewSFDouble scenegraph/vrml_tools.c:300. This vulnerability may lead to a denial of service.

An issue was discovered in the Linux kernel before 5.0.1. There is a memory leak in register_queue_kobjects() in net/core/net-sysfs.c, which will cause denial of service.

In the Linux kernel before 5.0.3, a memory leak exits in hsr_dev_finalize() in net/hsr/hsr_device.c if hsr_add_port fails to add a port, which may cause denial of service, aka CID-6caabe7f197d.

Denial of Service issue in FFmpeg 4.2 due to resource management errors via fftools/cmdutils.c.

A memory leak flaw was found in Golang in the RSA encrypting/decrypting code, which might lead to a resource exhaustion vulnerability using attacker-controlled inputs​. The memory leak happens in github.com/golang-fips/openssl/openssl/rsa.go#L113. The objects leaked are pkey​ and ctx​. That function uses named return parameters to free pkey​ and ctx​ if there is an error initializing the context or setting the different properties. All return statements related to error cases follow the "return nil, nil, fail(...)" pattern, meaning that pkey​ and ctx​ will be nil inside the deferred function that should free them.

<p>A denial of service vulnerability exists in Microsoft Outlook software when the software fails to properly handle objects in memory. An attacker who successfully exploited the vulnerability could cause a remote denial of service against a system.</p> <p>Exploitation of the vulnerability requires that a specially crafted email be sent to a vulnerable Outlook server.</p> <p>The security update addresses the vulnerability by correcting how Microsoft Outlook handles objects in memory.</p>

Huawei NIP6800 versions V500R001C30, V500R001C60SPC500, and V500R005C00; Secospace USG6600 and USG9500 versions V500R001C30SPC200, V500R001C30SPC600, V500R001C60SPC500, and V500R005C00 have a memory leak vulnerability. The software does not sufficiently track and release allocated memory while parse certain message, the attacker sends the message continuously that could consume remaining memory. Successful exploit could cause memory exhaust.

In BIG-IP versions 17.0.x before 17.0.0.1, 16.1.x before 16.1.3.1, 15.1.x before 15.1.6.1, 14.1.x before 14.1.5.1, and 13.1.x before 13.1.5.1, when a SIP profile is configured on a virtual server, undisclosed messages can cause an increase in memory resource utilization.

A vulnerability in the multicast traceroute version 2 (Mtrace2) feature of Cisco IOS XR Software could allow an unauthenticated, remote attacker to exhaust the UDP packet memory of an affected device. This vulnerability exists because the Mtrace2 code does not properly handle packet memory. An attacker could exploit this vulnerability by sending crafted packets to an affected device. A successful exploit could allow the attacker to exhaust the incoming UDP packet memory. The affected device would not be able to process higher-level UDP-based protocols packets, possibly causing a denial of service (DoS) condition. Note: This vulnerability can be exploited using IPv4 or IPv6.

Bareos is open source software for backup, archiving, and recovery of data for operating systems. When Bareos Director >= 18.2 but prior to 21.1.0, 20.0.6, and 19.2.12 is built and configured for PAM authentication, a failed PAM authentication will leak a small amount of memory. An attacker that is able to use the PAM Console (i.e. by knowing the shared secret or via the WebUI) can flood the Director with failing login attempts which will eventually lead to an out-of-memory condition in which the Director will not work anymore. Bareos Director versions 21.1.0, 20.0.6 and 19.2.12 contain a Bugfix for this problem. Users who are unable to upgrade may disable PAM authentication as a workaround.

In the Linux kernel, the following vulnerability has been resolved: can: m_can: m_can_read_fifo: fix memory leak in error branch In m_can_read_fifo(), if the second call to m_can_fifo_read() fails, the function jump to the out_fail label and returns without calling m_can_receive_skb(). This means that the skb previously allocated by alloc_can_skb() is not freed. In other terms, this is a memory leak. This patch adds a goto label to destroy the skb if an error occurs. Issue was found with GCC -fanalyzer, please follow the link below for details.

CODESYS Control runtime system before 3.5.16.10 allows Uncontrolled Memory Allocation.

A Missing Release of Memory after Effective Lifetime vulnerability in the Application Quality of Experience (appqoe) subsystem of the PFE of Juniper Networks Junos OS on SRX Series allows an unauthenticated network based attacker to cause a Denial of Service (DoS). Upon receiving specific traffic a memory leak will occur. Sustained processing of such specific traffic will eventually lead to an out of memory condition that prevents all services from continuing to function, and requires a manual restart to recover. A device is only vulnerable when advance(d) policy based routing (APBR) is configured and AppQoE (sla rule) is not configured for these APBR rules. This issue affects Juniper Networks Junos OS on SRX Series: 20.3 versions prior to 20.3R3-S2; 20.4 versions prior to 20.4R3-S2; 21.1 versions prior to 21.1R3; 21.2 versions prior to 21.2R2-S1, 21.2R3; 21.3 versions prior to 21.3R1-S2, 21.3R2. This issue does not affect Juniper Networks Junos OS versions prior to 20.3R1.

A vulnerability in the processing of inbound IPv6 packets in Juniper Networks Junos OS on QFX5000 Series and EX4600 switches may cause the memory to not be freed, leading to a packet DMA memory leak, and eventual Denial of Service (DoS) condition. Once the condition occurs, further packet processing will be impacted, creating a sustained Denial of Service (DoS) condition. The following error logs may be observed using the "show heap" command and the device may eventually run out of memory if such packets are received continuously. Jan 12 12:00:00 device-name fpc0 (buf alloc) failed allocating packet buffer Jan 12 12:00:01 device-name fpc0 (buf alloc) failed allocating packet buffer user@device-name> request pfe execute target fpc0 timeout 30 command "show heap" ID Base Total(b) Free(b) Used(b) % Name -- ---------- ----------- ----------- ----------- --- ----------- 0 246fc1a8 536870488 353653752 183216736 34 Kernel 1 91800000 16777216 12069680 4707536 28 DMA 2 92800000 75497472 69997640 5499832 7 PKT DMA DESC 3 106fc000 335544320 221425960 114118360 34 Bcm_sdk 4 97000000 176160768 200 176160568 99 Packet DMA <<<<<<<<<<<<<< 5 903fffe0 20971504 20971504 0 0 Blob This issue affects Juniper Networks Junos OS on QFX5000 Series, EX4600: 18.3R3 versions prior to 18.3R3-S6; 18.4 versions prior to 18.4R2-S9, 18.4R3-S9; 19.1 versions prior to 19.1R2-S3, 19.1R3-S7; 19.2 versions prior to 19.2R1-S8, 19.2R3-S3; 19.3 versions prior to 19.3R2-S7, 19.3R3-S4; 19.4 versions prior to 19.4R2-S5, 19.4R3-S6; 20.1 versions prior to 20.1R3-S1; 20.2 versions prior to 20.2R3-S2; 20.3 versions prior to 20.3R3-S1; 20.4 versions prior to 20.4R3; 21.1 versions prior to 21.1R2-S1, 21.1R3; 21.2 versions prior to 21.2R1-S1, 21.2R2. This issue does not affect Juniper Networks Junos OS: Any versions prior to 17.4R3; 18.1 versions prior to 18.1R3-S6; 18.2 versions prior to 18.2R3; 18.3 versions prior to 18.3R3; 18.4 versions prior to 18.4R2; 19.1 versions prior to 19.1R2.

An Improper Release of Memory Before Removing Last Reference vulnerability in the Session Initiation Protocol (SIP) Application Layer Gateway (ALG) of Juniper Networks Junos OS allows unauthenticated network-based attacker to cause a partial Denial of Service (DoS). On all MX and SRX platforms, if the SIP ALG is enabled, receipt of a specific SIP packet will create a stale SIP entry. Sustained receipt of such packets will cause the SIP call table to eventually fill up and cause a DoS for all SIP traffic. The SIP call usage can be monitored by "show security alg sip calls". To be affected the SIP ALG needs to be enabled, either implicitly / by default or by way of configuration. Please verify on SRX with: user@host> show security alg status | match sip SIP : Enabled Please verify on MX whether the following is configured: [ services ... rule <rule-name> (term <term-name>) from/match application/application-set <name> ] where either a. name = junos-sip or an application or application-set refers to SIP: b. [ applications application <name> application-protocol sip ] or c. [ applications application-set <name> application junos-sip ] This issue affects Juniper Networks Junos OS on SRX Series and MX Series: 20.4 versions prior to 20.4R3-S2; 21.1 versions prior to 21.1R3-S2; 21.2 versions prior to 21.2R2-S2; 21.2 versions prior to 21.2R3; 21.3 versions prior to 21.3R2; 21.4 versions prior to 21.4R2. This issue does not affect Juniper Networks Junos OS versions prior to 20.4R1. Juniper SIRT is not aware of any malicious exploitation of this vulnerability.

Potential memory leak in modem during the processing of NSA RRC Reconfiguration with invalid Radio Bearer Config in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Mobile

A potential memory leak issue was discovered in SDL2 in GLES_CreateTexture() function in SDL_render_gles.c. The vulnerability allows an attacker to cause a denial of service attack. The vulnerability affects SDL2 v2.0.4 and above. SDL-1.x are not affected.

An h2c direct connection to Apache Tomcat 10.0.0-M1 to 10.0.0-M6, 9.0.0.M5 to 9.0.36 and 8.5.1 to 8.5.56 did not release the HTTP/1.1 processor after the upgrade to HTTP/2. If a sufficient number of such requests were made, an OutOfMemoryException could occur leading to a denial of service.

A flaw was found in JBoss-client. The vulnerability occurs due to a memory leak on the JBoss client-side, when using UserTransaction repeatedly and leads to information leakage vulnerability.

Memory leak in icmp6 implementation in Linux Kernel 5.13+ allows a remote attacker to DoS a host by making it go out-of-memory via icmp6 packets of type 130 or 131. We recommend upgrading past commit 2d3916f3189172d5c69d33065c3c21119fe539fc.

A Missing Release of Memory after Effective Lifetime vulnerability in the Anti-Virus processing of Juniper Networks Junos OS on SRX Series allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS). On all SRX platforms with Anti-Virus enabled, if a server sends specific content in the HTTP body of a response to a client request, these packets are queued by Anti-Virus processing in Juniper Buffers (jbufs) which are never released. When these jbufs are exhausted, the device stops forwarding all transit traffic. A jbuf memory leak can be noticed from the following logs: (<node>.)<fpc> Warning: jbuf pool id <#> utilization level (<current level>%) is above <threshold>%! To recover from this issue, the affected device needs to be manually rebooted to free the leaked jbufs. This issue affects Junos OS on SRX Series:  * all versions before 21.2R3-S9, * 21.4 versions before 21.4R3-S10, * 22.2 versions before 22.2R3-S6, * 22.4 versions before 22.4R3-S6, * 23.2 versions before 23.2R2-S3, * 23.4 versions before 23.4R2-S3, * 24.2 versions before 24.2R2.

In the Linux kernel, the following vulnerability has been resolved: nvmet: fix memory leak in nvmet_alloc_ctrl() When creating ctrl in nvmet_alloc_ctrl(), if the cntlid_min is larger than cntlid_max of the subsystem, and jumps to the "out_free_changed_ns_list" label, but the ctrl->sqs lack of be freed. Fix this by jumping to the "out_free_sqs" label.

A memory leak vulnerability was found in Privoxy when handling errors.

A flaw was found in JSS, where it did not properly free up all memory. Over time, the wasted memory builds up in the server memory, saturating the server’s RAM. This flaw allows an attacker to force the invocation of an out-of-memory process, causing a denial of service.

FreeSWITCH is a Software Defined Telecom Stack enabling the digital transformation from proprietary telecom switches to a software implementation that runs on any commodity hardware. FreeSWITCH prior to version 1.10.7 is susceptible to Denial of Service via SIP flooding. When flooding FreeSWITCH with SIP messages, it was observed that after a number of seconds the process was killed by the operating system due to memory exhaustion. By abusing this vulnerability, an attacker is able to crash any FreeSWITCH instance by flooding it with SIP messages, leading to Denial of Service. The attack does not require authentication and can be carried out over UDP, TCP or TLS. This issue was patched in version 1.10.7.

Multiple Cisco products are affected by a vulnerability in the way the Snort detection engine processes ICMP traffic that could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper memory resource management while the Snort detection engine is processing ICMP packets. An attacker could exploit this vulnerability by sending a series of ICMP packets through an affected device. A successful exploit could allow the attacker to exhaust resources on the affected device, causing the device to reload.

Live555 through 1.08 has a memory leak in AC3AudioStreamParser for AC3 files.

A vulnerability has been identified in SIMATIC Drive Controller family (All versions >= V2.9.2 < V2.9.4), SIMATIC ET 200SP Open Controller CPU 1515SP PC2 (incl. SIPLUS variants) (All versions >= V21.9 < V21.9.4), SIMATIC S7-1200 CPU family (incl. SIPLUS variants) (All versions >= V4.5.0 < V4.5.2), SIMATIC S7-1500 CPU family (incl. related ET200 CPUs and SIPLUS variants) (All versions >= V2.9.2 < V2.9.4), SIMATIC S7-1500 Software Controller (All versions >= V21.9 < V21.9.4), SIMATIC S7-PLCSIM Advanced (All versions >= V4.0 < V4.0 SP1), SIPLUS TIM 1531 IRC (All versions < V2.3.6), TIM 1531 IRC (All versions < V2.3.6). An unauthenticated attacker could cause a denial-of-service condition in a PLC when sending specially prepared packets over port 102/tcp. A restart of the affected device is needed to restore normal operations.

There is a Memory leak vulnerability with the codec detection module in Huawei Smartphone.Successful exploitation of this vulnerability may cause the device to restart due to memory exhaustion.

There is a Memory leaks vulnerability in Huawei Smartphone.Successful exploitation of this vulnerability may affect service availability.

A flaw was found in Undertow. A buffer leak on the incoming WebSocket PONG message may lead to memory exhaustion. This flaw allows an attacker to cause a denial of service. The highest threat from this vulnerability is availability.

In Eclipse Mosquitto up to version 2.0.18a, an attacker can achieve memory leaking, segmentation fault or heap-use-after-free by sending specific sequences of "CONNECT", "DISCONNECT", "SUBSCRIBE", "UNSUBSCRIBE" and "PUBLISH" packets.

On affected platforms running Arista EOS with BGP Link State configured, BGP peer flap can cause the BGP agent to leak memory. This may result in BGP routing processing being terminated and route flapping.

In Mosquitto before 2.0.16, a memory leak occurs when clients send v5 CONNECT packets with a will message that contains invalid property types.

A memory leak in the component CConsole::Chain of Teeworlds v0.7.5 allows attackers to cause a Denial of Service (DoS) via opening a crafted file.

OpenSIPS, a Session Initiation Protocol (SIP) server implementation, has a memory leak starting in the 2.3 branch and priot to versions 3.1.8 and 3.2.5. The memory leak was detected in the function `parse_mi_request` while performing coverage-guided fuzzing. This issue can be reproduced by sending multiple requests of the form `{"jsonrpc": "2.0","method": "log_le`. This malformed message was tested against an instance of OpenSIPS via FIFO transport layer and was found to increase the memory consumption over time. To abuse this memory leak, attackers need to reach the management interface (MI) which typically should only be exposed on trusted interfaces. In cases where the MI is exposed to the internet without authentication, abuse of this issue will lead to memory exhaustion which may affect the underlying system’s availability. No authentication is typically required to reproduce this issue. On the other hand, memory leaks may occur in other areas of OpenSIPS where the cJSON library is used for parsing JSON objects. The issue has been fixed in versions 3.1.8 and 3.2.5.