zzzcms zzzphp before 2.0.4 allows remote attackers to execute arbitrary OS commands by placing them in the keys parameter of a ?location=search URI, as demonstrated by an OS command within an "if" "end if" block.

elFinder is an open-source file manager for web, written in JavaScript using jQuery UI. Several vulnerabilities affect elFinder 2.1.58. These vulnerabilities can allow an attacker to execute arbitrary code and commands on the server hosting the elFinder PHP connector, even with minimal configuration. The issues were patched in version 2.1.59. As a workaround, ensure the connector is not exposed without authentication.

OS command injection vulnerability in Init function in QSAN XEVO allows remote attackers to execute arbitrary commands without permissions. The referred vulnerability has been solved with the updated version of QSAN XEVO v2.1.0.

Command injection vulnerability in QSAN XEVO, SANOS allows remote unauthenticated attackers to execute arbitrary commands. Suggest contacting with QSAN and refer to recommendations in QSAN Document.

A vulnerability exists in RaspAP 2.6 to 2.6.5 in the "iface" GET parameter in /ajax/networking/get_netcfg.php, when the "iface" parameter value contains special characters such as ";" which enables an unauthenticated attacker to execute arbitrary OS commands.

QSAN SANOS factory reset function does not filter special parameters. Remote attackers can use this vulnerability to inject and execute arbitrary commands without permissions. The referred vulnerability has been solved with the updated version of QSAN SANOS v2.1.0.

OS command injection vulnerability in Array function in QSAN XEVO allows remote unauthenticated attackers to execute arbitrary commands via status parameter. The referred vulnerability has been solved with the updated version of QSAN XEVO v2.1.0.

A command injection vulnerability exists in the D-Link DIR-882 Router firmware DIR882A1_FW102B02 within the `prog.cgi` and `rc` binaries. The `sub_432F60` function in `prog.cgi` stores user-supplied `SetSysLogSettings/IPAddress` values in NVRAM via `nvram_safe_set("SysLogRemote_IPAddress", ...)`. These values are later retrieved in the `sub_448DCC` function of `rc` using `nvram_safe_get` and concatenated into a shell command executed via `twsystem()` without any sanitization. An unauthenticated remote attacker can exploit this vulnerability to execute arbitrary commands on the device through specially crafted HTTP requests to the router's web interface.

An issue was discovered in SaltStack Salt before 3002.5. Sending crafted web requests to the Salt API can result in salt.utils.thin.gen_thin() command injection because of different handling of single versus double quotes. This is related to salt/utils/thin.py.

Akuvox C315 115.116.2613 allows remote command Injection via the cfgd_server service. The attack vector is sending a payload to port 189 (default root 0.0.0.0).

The async-git package before 1.13.2 for Node.js allows OS Command Injection via shell metacharacters, as demonstrated by git.reset and git.tag.

The api/ZRFirmware/set_time_zone interface in China Mobile An Lianbao WF-1 router 1.0.1 allows remote attackers to execute arbitrary commands via shell metacharacters in the zonename parameter.

The api/ZRIGMP/set_IGMP_PROXY interface in China Mobile An Lianbao WF-1 router 1.0.1 allows remote attackers to execute arbitrary commands via shell metacharacters in the IGMP_PROXY_WAN_CONNECT parameter.

The api/zrDm/set_ZRElink interface in China Mobile An Lianbao WF-1 router 1.0.1 allows remote attackers to execute arbitrary commands via shell metacharacters in the bssaddr, abiaddr, devtoken, devid, elinksync, or elink_proc_enable parameter.

A vulnerability, which was classified as critical, has been found in Zend.To up to 6.10-6 Beta. This issue affects the function exec of the file NSSDropoff.php. The manipulation of the argument file_1 leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 6.10-7 is able to address this issue. It is recommended to upgrade the affected component. This affects a rather old version of the software. The vendor recommends updating to the latest release. Additional countermeasures have been added in 6.15-8.

The api/ZRAndlink/set_ZRAndlink interface in China Mobile An Lianbao WF-1 router 1.0.1 allows remote attackers to execute arbitrary commands via shell metacharacters in the iandlink_proc_enable parameter.

The api/ZRIGMP/set_MLD_PROXY interface in China Mobile An Lianbao WF-1 router 1.0.1 allows remote attackers to execute arbitrary commands via shell metacharacters in the MLD_PROXY_WAN_CONNECT parameter.

The gnuplot package prior to version 0.1.0 for Node.js allows code execution via shell metacharacters in Gnuplot commands.

Zoho ManageEngine ADSelfService Plus through 6101 is vulnerable to unauthenticated Remote Code Execution while changing the password.

A command injection vulnerability has been reported to affect QNAP NAS running legacy versions of QTS. If exploited, this vulnerability allows attackers to execute arbitrary commands in a compromised application. This issue affects: QNAP Systems Inc. QTS versions prior to 4.3.6.1663 Build 20210504; versions prior to 4.3.3.1624 Build 20210416. This issue does not affect: QNAP Systems Inc. QTS 4.5.3. QNAP Systems Inc. QuTS hero h4.5.3. QNAP Systems Inc. QuTScloud c4.5.5.

LUCY Security Awareness Software through 4.7.x allows unauthenticated remote code execution because the Migration Tool (in the Support section) allows upload of .php files within a system.tar.gz file. The .php file becomes accessible with a public/system/static URI.

Zoho ManageEngine Desktop Central before build 10.0.683 allows unauthenticated command injection due to improper handling of an input command in on-demand operations.

Genexis PLATINUM 4410 2.1 P4410-V2-1.28 devices allow remote attackers to execute arbitrary code via shell metacharacters to sys_config_valid.xgi, as demonstrated by the sys_config_valid.xgi?exeshell=%60telnetd%20%26%60 URI.

Discord-Recon is a bot for the Discord chat service. Versions of Discord-Recon 0.0.3 and prior contain a vulnerability in which a remote attacker is able to overwrite any file on the system with the command results. This can result in remote code execution when the user overwrite important files on the system. As a workaround, bot maintainers can edit their `setting.py` file then add `<` and `>` into the `RCE` variable inside of it to fix the issue without an update. The vulnerability is patched in version 0.0.4.

The _httpsrequest function in Snoopy allows remote attackers to execute arbitrary commands. NOTE: this issue exists dues to an incomplete fix for CVE-2008-4796.

UI-Dialog 1.09 and earlier allows remote attackers to execute arbitrary commands.

EPrints 3.4.2 allows remote attackers to execute OS commands via crafted LaTeX input to a cgi/cal?year= URI.

The samba-client package before 4.0.0 for Node.js allows command injection because of the use of process.exec.

A vulnerability, which was classified as critical, was found in D-Link DIR-816 1.10CNB05. Affected is the function setipsec_config of the file /goform/setipsec_config. The manipulation of the argument localIP/remoteIP leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

Mesa Labs AmegaView version 3.0 is vulnerable to a command injection, which may allow an attacker to remotely execute arbitrary code.

An OS command injection was found in SecuwaySSL, when special characters injection on execute command with runCommand arguments.

A command injection vulnerability exists in apply.cgi on the ASUS RP-AC52 access point, firmware version 1.0.1.1s and possibly earlier, web interface specifically in the action_script parameter. The action_script parameter specifies a script to be executed if the action_mode parameter does not contain a valid state. If the input provided by action_script does not match one of the hard coded options, then it will be executed as the argument of either a system() or an eval() call allowing arbitrary commands to be executed.

A vulnerability exists in the SaveConfigFile function of the RACompare Service, which may allow for OS command injection. This vulnerability may allow a remote, unauthenticated attacker to execute arbitrary commands in Rockwell Automation FactoryTalk AssetCentre v10.00 and earlier.

An issue was discovered in D-Link DIR-816 DIR-816A2_FWv1.10CNB05_R1B011D88210 The HTTP request parameter is used in the handler function of /goform/form2userconfig.cgi route, which can construct the user name string to delete the user function. This can lead to command injection through shell metacharacters.

An issue was discovered in Cloud Foundry Foundation Cloud Foundry release versions prior to v245 and cf-mysql-release versions prior to v31. A command injection vulnerability was discovered in a common script used by many Cloud Foundry components. A malicious user may exploit numerous vectors to execute arbitrary commands on servers running Cloud Foundry.

A vulnerability has been found in D-Link DIR-816 1.10CNB05 and classified as critical. Affected by this vulnerability is the function qosClassifier of the file /goform/qosClassifier. The manipulation of the argument dip_address/sip_address leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A command injection vulnerability in Nokogiri v1.10.3 and earlier allows commands to be executed in a subprocess via Ruby's `Kernel.open` method. Processes are vulnerable only if the undocumented method `Nokogiri::CSS::Tokenizer#load_file` is being called with unsafe user input as the filename. This vulnerability appears in code generated by the Rexical gem versions v1.0.6 and earlier. Rexical is used by Nokogiri to generate lexical scanner code for parsing CSS queries. The underlying vulnerability was addressed in Rexical v1.0.7 and Nokogiri upgraded to this version of Rexical in Nokogiri v1.10.4.

The web interface in git (gitweb) 1.5.x before 1.5.5 allows remote attackers to execute arbitrary commands via shell metacharacters related to git_search.

An attacker can use the format parameter to inject arbitrary commands in the npm package morgan < 1.9.1.

Nagios XI Switch Wizard before version 2.5.7 is vulnerable to remote code execution through improper neutralisation of special elements used in an OS Command (OS Command injection).

Shopware is an open source eCommerce platform. Versions prior to 6.4.3.1 contain a command injection vulnerability in mail agent settings. Version 6.4.3.1 contains a patch. As workarounds for older versions of 6.1, 6.2, and 6.3, corresponding security measures are also available via a plugin.

A command injection vulnerability was discovered in the HNAP1 protocol in D-Link DIR-823G devices with firmware V1.0.2B05. An attacker is able to execute arbitrary web scripts via shell metacharacters in the Captcha field to Login.

Advantech WebAccess/SCADA, Versions 8.3.5 and prior. Multiple command injection vulnerabilities, caused by a lack of proper validation of user-supplied data, may allow remote code execution.

In ProLink PRC2402M V1.0.18 and older, the set_sys_cmd function in the adm.cgi binary, accessible with a page parameter value of sysCMD contains a trivial command injection where the value of the command parameter is passed directly to system.

A command injection vulnerability has been reported to affect QTS and QuTS hero. If exploited, this vulnerability allows attackers to execute arbitrary commands in a compromised application. We have already fixed this vulnerability in the following versions: QTS 4.5.2.1566 Build 20210202 and later QTS 4.5.1.1495 Build 20201123 and later QTS 4.3.6.1620 Build 20210322 and later QTS 4.3.4.1632 Build 20210324 and later QTS 4.3.3.1624 Build 20210416 and later QTS 4.2.6 Build 20210327 and later QuTS hero h4.5.1.1491 build 20201119 and later

webdist CGI program (webdist.cgi) in SGI IRIX allows remote attackers to execute arbitrary commands via shell metacharacters in the distloc parameter.

RSA Netwitness Platform versions prior to 11.2.1.1 and RSA Security Analytics versions prior to 10.6.6.1 are vulnerable to a Command Injection vulnerability due to missing input validation in the product. A remote unauthenticated malicious user could exploit this vulnerability to execute arbitrary commands on the server.

A command injection have been found in YouPHPTube Encoder. A successful attack could allow an attacker to compromise the server. Exploitable unauthenticated command injections exist in YouPHPTube Encoder 2.3 a plugin for providing encoder functionality in YouPHPTube. The parameter base64Url in /objects/getImageMP4.php is vulnerable to a command injection attack.

A command injection have been found in YouPHPTube Encoder. A successful attack could allow an attacker to compromise the server. Exploitable unauthenticated command injections exist in YouPHPTube Encoder 2.3 a plugin for providing encoder functionality in YouPHPTube. The parameter base64Url in /objects/getSpiritsFromVideo.php is vulnerable to a command injection attack.

Sierra Wireless GX 440 devices with ALEOS firmware 4.3.2 allow Embedded_Ace_Set_Task.cgi command injection.