In the Linux kernel, the following vulnerability has been resolved: tracing: Fix overflow in get_free_elt() "tracing_map->next_elt" in get_free_elt() is at risk of overflowing. Once it overflows, new elements can still be inserted into the tracing_map even though the maximum number of elements (`max_elts`) has been reached. Continuing to insert elements after the overflow could result in the tracing_map containing "tracing_map->max_size" elements, leaving no empty entries. If any attempt is made to insert an element into a full tracing_map using `__tracing_map_insert()`, it will cause an infinite loop with preemption disabled, leading to a CPU hang problem. Fix this by preventing any further increments to "tracing_map->next_elt" once it reaches "tracing_map->max_elt".

Integer overflow in some Intel(R) Aptio* V UEFI Firmware Integrator Tools may allow an authenticated user to potentially enable denial of service via local access.

Redis is an in-memory database that persists on disk. Authenticated users can issue a `HRANDFIELD` or `ZRANDMEMBER` command with specially crafted arguments to trigger a denial-of-service by crashing Redis with an assertion failure. This problem affects Redis versions 6.2 or newer up to but not including 6.2.9 as well as versions 7.0 up to but not including 7.0.8. Users are advised to upgrade. There are no known workarounds for this vulnerability.

Integer overflow in some Intel(R) Server Board BMC firmware before version 2.90 may allow a privileged user to enable denial of service via local access.

In the Linux kernel, the following vulnerability has been resolved: media: atomisp: prevent integer overflow in sh_css_set_black_frame() The "height" and "width" values come from the user so the "height * width" multiplication can overflow.

In the Linux kernel, the following vulnerability has been resolved: bpf: fix potential 32-bit overflow when accessing ARRAY map element If BPF array map is bigger than 4GB, element pointer calculation can overflow because both index and elem_size are u32. Fix this everywhere by forcing 64-bit multiplication. Extract this formula into separate small helper and use it consistently in various places. Speculative-preventing formula utilizing index_mask trick is left as is, but explicit u64 casts are added in both places.

In the Linux kernel, the following vulnerability has been resolved: NFSD: prevent integer overflow on 32 bit systems On a 32 bit system, the "len * sizeof(*p)" operation can have an integer overflow.

In the Linux kernel, the following vulnerability has been resolved: RDMA/hfi1: Fix potential integer multiplication overflow errors When multiplying of different types, an overflow is possible even when storing the result in a larger type. This is because the conversion is done after the multiplication. So arithmetic overflow and thus in incorrect value is possible. Correct an instance of this in the inter packet delay calculation. Fix by ensuring one of the operands is u64 which will promote the other to u64 as well ensuring no overflow.

In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Fix list protocols enumeration in the base protocol While enumerating protocols implemented by the SCMI platform using BASE_DISCOVER_LIST_PROTOCOLS, the number of returned protocols is currently validated in an improper way since the check employs a sum between unsigned integers that could overflow and cause the check itself to be silently bypassed if the returned value 'loop_num_ret' is big enough. Fix the validation avoiding the addition.

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: validate BOOT sectors_per_clusters When the NTFS BOOT sectors_per_clusters field is > 0x80, it represents a shift value. Make sure that the shift value is not too large before using it (NTFS max cluster size is 2MB). Return -EVINVAL if it too large. This prevents negative shift values and shift values that are larger than the field size. Prevents this UBSAN error: UBSAN: shift-out-of-bounds in ../fs/ntfs3/super.c:673:16 shift exponent -192 is negative

In the Linux kernel, the following vulnerability has been resolved: watchdog: rzg2l_wdt: Fix 32bit overflow issue The value of timer_cycle_us can be 0 due to 32bit overflow. For eg:- If we assign the counter value "0xfff" for computing maxval. This patch fixes this issue by appending ULL to 1024, so that it is promoted to 64bit. This patch also fixes the warning message, 'watchdog: Invalid min and max timeout values, resetting to 0!'.

In the Linux kernel, the following vulnerability has been resolved: ima: Fix a potential integer overflow in ima_appraise_measurement When the ima-modsig is enabled, the rc passed to evm_verifyxattr() may be negative, which may cause the integer overflow problem.

In the Linux kernel, the following vulnerability has been resolved: ACPI: APEI: Fix integer overflow in ghes_estatus_pool_init() Change num_ghes from int to unsigned int, preventing an overflow and causing subsequent vmalloc() to fail. The overflow happens in ghes_estatus_pool_init() when calculating len during execution of the statement below as both multiplication operands here are signed int: len += (num_ghes * GHES_ESOURCE_PREALLOC_MAX_SIZE); The following call trace is observed because of this bug: [ 9.317108] swapper/0: vmalloc error: size 18446744071562596352, exceeds total pages, mode:0xcc0(GFP_KERNEL), nodemask=(null),cpuset=/,mems_allowed=0-1 [ 9.317131] Call Trace: [ 9.317134] <TASK> [ 9.317137] dump_stack_lvl+0x49/0x5f [ 9.317145] dump_stack+0x10/0x12 [ 9.317146] warn_alloc.cold+0x7b/0xdf [ 9.317150] ? __device_attach+0x16a/0x1b0 [ 9.317155] __vmalloc_node_range+0x702/0x740 [ 9.317160] ? device_add+0x17f/0x920 [ 9.317164] ? dev_set_name+0x53/0x70 [ 9.317166] ? platform_device_add+0xf9/0x240 [ 9.317168] __vmalloc_node+0x49/0x50 [ 9.317170] ? ghes_estatus_pool_init+0x43/0xa0 [ 9.317176] vmalloc+0x21/0x30 [ 9.317177] ghes_estatus_pool_init+0x43/0xa0 [ 9.317179] acpi_hest_init+0x129/0x19c [ 9.317185] acpi_init+0x434/0x4a4 [ 9.317188] ? acpi_sleep_proc_init+0x2a/0x2a [ 9.317190] do_one_initcall+0x48/0x200 [ 9.317195] kernel_init_freeable+0x221/0x284 [ 9.317200] ? rest_init+0xe0/0xe0 [ 9.317204] kernel_init+0x1a/0x130 [ 9.317205] ret_from_fork+0x22/0x30 [ 9.317208] </TASK> [ rjw: Subject and changelog edits ]

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix qgroup reserve overflow the qgroup limit We use extent_changeset->bytes_changed in qgroup_reserve_data() to record how many bytes we set for EXTENT_QGROUP_RESERVED state. Currently the bytes_changed is set as "unsigned int", and it will overflow if we try to fallocate a range larger than 4GiB. The result is we reserve less bytes and eventually break the qgroup limit. Unlike regular buffered/direct write, which we use one changeset for each ordered extent, which can never be larger than 256M. For fallocate, we use one changeset for the whole range, thus it no longer respects the 256M per extent limit, and caused the problem. The following example test script reproduces the problem: $ cat qgroup-overflow.sh #!/bin/bash DEV=/dev/sdj MNT=/mnt/sdj mkfs.btrfs -f $DEV mount $DEV $MNT # Set qgroup limit to 2GiB. btrfs quota enable $MNT btrfs qgroup limit 2G $MNT # Try to fallocate a 3GiB file. This should fail. echo echo "Try to fallocate a 3GiB file..." fallocate -l 3G $MNT/3G.file # Try to fallocate a 5GiB file. echo echo "Try to fallocate a 5GiB file..." fallocate -l 5G $MNT/5G.file # See we break the qgroup limit. echo sync btrfs qgroup show -r $MNT umount $MNT When running the test: $ ./qgroup-overflow.sh (...) Try to fallocate a 3GiB file... fallocate: fallocate failed: Disk quota exceeded Try to fallocate a 5GiB file... qgroupid         rfer         excl     max_rfer --------         ----         ----     -------- 0/5           5.00GiB      5.00GiB      2.00GiB Since we have no control of how bytes_changed is used, it's better to set it to u64.

In the Linux kernel, the following vulnerability has been resolved: eeprom: ee1004: limit i2c reads to I2C_SMBUS_BLOCK_MAX Commit effa453168a7 ("i2c: i801: Don't silently correct invalid transfer size") revealed that ee1004_eeprom_read() did not properly limit how many bytes to read at once. In particular, i2c_smbus_read_i2c_block_data_or_emulated() takes the length to read as an u8. If count == 256 after taking into account the offset and page boundary, the cast to u8 overflows. And this is common when user space tries to read the entire EEPROM at once. To fix it, limit each read to I2C_SMBUS_BLOCK_MAX (32) bytes, already the maximum length i2c_smbus_read_i2c_block_data_or_emulated() allows.

In wlan driver, there is a possible missing params check. This could lead to local denial of service in wlan services.

In wlan driver, there is a possible missing bounds check. This could lead to local denial of service in wlan services.

TensorFlow is an end-to-end open source platform for machine learning. In affected versions an attacker can cause a denial of service in `boosted_trees_create_quantile_stream_resource` by using negative arguments. The [implementation](https://github.com/tensorflow/tensorflow/blob/84d053187cb80d975ef2b9684d4b61981bca0c41/tensorflow/core/kernels/boosted_trees/quantile_ops.cc#L96) does not validate that `num_streams` only contains non-negative numbers. In turn, [this results in using this value to allocate memory](https://github.com/tensorflow/tensorflow/blob/84d053187cb80d975ef2b9684d4b61981bca0c41/tensorflow/core/kernels/boosted_trees/quantiles/quantile_stream_resource.h#L31-L40). However, `reserve` receives an unsigned integer so there is an implicit conversion from a negative value to a large positive unsigned. This results in a crash from the standard library. We have patched the issue in GitHub commit 8a84f7a2b5a2b27ecf88d25bad9ac777cd2f7992. The fix will be included in TensorFlow 2.6.0. We will also cherrypick this commit on TensorFlow 2.5.1, TensorFlow 2.4.3, and TensorFlow 2.3.4, as these are also affected and still in supported range.

In wlan driver, there is a possible missing bounds check, This could lead to local denial of service in wlan services.

In wlan driver, there is a possible missing params check. This could lead to local denial of service in wlan services.

NVIDIA GPU Display Driver for Linux contains a vulnerability in the kernel mode layer handler, where an integer truncation can lead to an out-of-bounds read, which may lead to denial of service.

In sensor driver, there is a possible out of bounds write due to a missing bounds check. This could lead to local denial of service in kernel.

In wlan driver, there is a possible missing params check. This could lead to local denial of service in wlan services.

Integer overflow in the VGA module in QEMU allows local guest OS users to cause a denial of service (out-of-bounds read and QEMU process crash) by editing VGA registers in VBE mode.

In Artifex Ghostscript through 10.05.1, ocr_begin_page in devices/gdevpdfocr.c has an integer overflow that leads to a heap-based buffer overflow in ocr_line8.

Redis is an in-memory database that persists on disk. Authenticated users issuing specially crafted `SRANDMEMBER`, `ZRANDMEMBER`, and `HRANDFIELD` commands can trigger an integer overflow, resulting in a runtime assertion and termination of the Redis server process. This problem affects all Redis versions. Patches were released in Redis version(s) 6.0.18, 6.2.11 and 7.0.9.

TensorFlow is an open source platform for machine learning. Prior to versions 2.9.0, 2.8.1, 2.7.2, and 2.6.4, the implementation of `tf.raw_ops.SpaceToBatchND` (in all backends such as XLA and handwritten kernels) is vulnerable to an integer overflow: The result of this integer overflow is used to allocate the output tensor, hence we get a denial of service via a `CHECK`-failure (assertion failure), as in TFSA-2021-198. Versions 2.9.0, 2.8.1, 2.7.2, and 2.6.4 contain a patch for this issue.

Vulnerability of insufficient data length verification in the partition module. Impact: Successful exploitation of this vulnerability may affect availability.

In the Linux kernel, the following vulnerability has been resolved: net_sched: sch_sfq: reject invalid perturb period Gerrard Tai reported that SFQ perturb_period has no range check yet, and this can be used to trigger a race condition fixed in a separate patch. We want to make sure ctl->perturb_period * HZ will not overflow and is positive. tc qd add dev lo root sfq perturb -10 # negative value : error Error: sch_sfq: invalid perturb period. tc qd add dev lo root sfq perturb 1000000000 # too big : error Error: sch_sfq: invalid perturb period. tc qd add dev lo root sfq perturb 2000000 # acceptable value tc -s -d qd sh dev lo qdisc sfq 8005: root refcnt 2 limit 127p quantum 64Kb depth 127 flows 128 divisor 1024 perturb 2000000sec Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0

In the Linux kernel, the following vulnerability has been resolved: fs/jfs: Prevent integer overflow in AG size calculation The JFS filesystem calculates allocation group (AG) size using 1 << l2agsize in dbExtendFS(). When l2agsize exceeds 31 (possible with >2TB aggregates on 32-bit systems), this 32-bit shift operation causes undefined behavior and improper AG sizing. On 32-bit architectures: - Left-shifting 1 by 32+ bits results in 0 due to integer overflow - This creates invalid AG sizes (0 or garbage values) in sbi->bmap->db_agsize - Subsequent block allocations would reference invalid AG structures - Could lead to: - Filesystem corruption during extend operations - Kernel crashes due to invalid memory accesses - Security vulnerabilities via malformed on-disk structures Fix by casting to s64 before shifting: bmp->db_agsize = (s64)1 << l2agsize; This ensures 64-bit arithmetic even on 32-bit architectures. The cast matches the data type of db_agsize (s64) and follows similar patterns in JFS block calculation code. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: crypto: ecdsa - Harden against integer overflows in DIV_ROUND_UP() Herbert notes that DIV_ROUND_UP() may overflow unnecessarily if an ecdsa implementation's ->key_size() callback returns an unusually large value. Herbert instead suggests (for a division by 8): X / 8 + !!(X & 7) Based on this formula, introduce a generic DIV_ROUND_UP_POW2() macro and use it in lieu of DIV_ROUND_UP() for ->key_size() return values. Additionally, use the macro in ecc_digits_from_bytes(), whose "nbytes" parameter is a ->key_size() return value in some instances, or a user-specified ASN.1 length in the case of ecdsa_get_signature_rs().

In the Linux kernel, the following vulnerability has been resolved: Squashfs: fix handling and sanity checking of xattr_ids count A Sysbot [1] corrupted filesystem exposes two flaws in the handling and sanity checking of the xattr_ids count in the filesystem. Both of these flaws cause computation overflow due to incorrect typing. In the corrupted filesystem the xattr_ids value is 4294967071, which stored in a signed variable becomes the negative number -225. Flaw 1 (64-bit systems only): The signed integer xattr_ids variable causes sign extension. This causes variable overflow in the SQUASHFS_XATTR_*(A) macros. The variable is first multiplied by sizeof(struct squashfs_xattr_id) where the type of the sizeof operator is "unsigned long". On a 64-bit system this is 64-bits in size, and causes the negative number to be sign extended and widened to 64-bits and then become unsigned. This produces the very large number 18446744073709548016 or 2^64 - 3600. This number when rounded up by SQUASHFS_METADATA_SIZE - 1 (8191 bytes) and divided by SQUASHFS_METADATA_SIZE overflows and produces a length of 0 (stored in len). Flaw 2 (32-bit systems only): On a 32-bit system the integer variable is not widened by the unsigned long type of the sizeof operator (32-bits), and the signedness of the variable has no effect due it always being treated as unsigned. The above corrupted xattr_ids value of 4294967071, when multiplied overflows and produces the number 4294963696 or 2^32 - 3400. This number when rounded up by SQUASHFS_METADATA_SIZE - 1 (8191 bytes) and divided by SQUASHFS_METADATA_SIZE overflows again and produces a length of 0. The effect of the 0 length computation: In conjunction with the corrupted xattr_ids field, the filesystem also has a corrupted xattr_table_start value, where it matches the end of filesystem value of 850. This causes the following sanity check code to fail because the incorrectly computed len of 0 matches the incorrect size of the table reported by the superblock (0 bytes). len = SQUASHFS_XATTR_BLOCK_BYTES(*xattr_ids); indexes = SQUASHFS_XATTR_BLOCKS(*xattr_ids); /* * The computed size of the index table (len bytes) should exactly * match the table start and end points */ start = table_start + sizeof(*id_table); end = msblk->bytes_used; if (len != (end - start)) return ERR_PTR(-EINVAL); Changing the xattr_ids variable to be "usigned int" fixes the flaw on a 64-bit system. This relies on the fact the computation is widened by the unsigned long type of the sizeof operator. Casting the variable to u64 in the above macro fixes this flaw on a 32-bit system. It also means 64-bit systems do not implicitly rely on the type of the sizeof operator to widen the computation. [1] https://lore.kernel.org/lkml/000000000000cd44f005f1a0f17f@google.com/

In the Linux kernel, the following vulnerability has been resolved: gpio: gpio-xilinx: Fix integer overflow Current implementation is not able to configure more than 32 pins due to incorrect data type. So type casting with unsigned long to avoid it.

In the Linux kernel, the following vulnerability has been resolved: cifs: Fix integer overflow while processing closetimeo mount option User-provided mount parameter closetimeo of type u32 is intended to have an upper limit, but before it is validated, the value is converted from seconds to jiffies which can lead to an integer overflow. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: xsk: fix an integer overflow in xp_create_and_assign_umem() Since the i and pool->chunk_size variables are of type 'u32', their product can wrap around and then be cast to 'u64'. This can lead to two different XDP buffers pointing to the same memory area. Found by InfoTeCS on behalf of Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix possible int overflows in nilfs_fiemap() Since nilfs_bmap_lookup_contig() in nilfs_fiemap() calculates its result by being prepared to go through potentially maxblocks == INT_MAX blocks, the value in n may experience an overflow caused by left shift of blkbits. While it is extremely unlikely to occur, play it safe and cast right hand expression to wider type to mitigate the issue. Found by Linux Verification Center (linuxtesting.org) with static analysis tool SVACE.

In the Linux kernel, the following vulnerability has been resolved: udp: Fix multiple wraparounds of sk->sk_rmem_alloc. __udp_enqueue_schedule_skb() has the following condition: if (atomic_read(&sk->sk_rmem_alloc) > sk->sk_rcvbuf) goto drop; sk->sk_rcvbuf is initialised by net.core.rmem_default and later can be configured by SO_RCVBUF, which is limited by net.core.rmem_max, or SO_RCVBUFFORCE. If we set INT_MAX to sk->sk_rcvbuf, the condition is always false as sk->sk_rmem_alloc is also signed int. Then, the size of the incoming skb is added to sk->sk_rmem_alloc unconditionally. This results in integer overflow (possibly multiple times) on sk->sk_rmem_alloc and allows a single socket to have skb up to net.core.udp_mem[1]. For example, if we set a large value to udp_mem[1] and INT_MAX to sk->sk_rcvbuf and flood packets to the socket, we can see multiple overflows: # cat /proc/net/sockstat | grep UDP: UDP: inuse 3 mem 7956736 <-- (7956736 << 12) bytes > INT_MAX * 15 ^- PAGE_SHIFT # ss -uam State Recv-Q ... UNCONN -1757018048 ... <-- flipping the sign repeatedly skmem:(r2537949248,rb2147483646,t0,tb212992,f1984,w0,o0,bl0,d0) Previously, we had a boundary check for INT_MAX, which was removed by commit 6a1f12dd85a8 ("udp: relax atomic operation on sk->sk_rmem_alloc"). A complete fix would be to revert it and cap the right operand by INT_MAX: rmem = atomic_add_return(size, &sk->sk_rmem_alloc); if (rmem > min(size + (unsigned int)sk->sk_rcvbuf, INT_MAX)) goto uncharge_drop; but we do not want to add the expensive atomic_add_return() back just for the corner case. Casting rmem to unsigned int prevents multiple wraparounds, but we still allow a single wraparound. # cat /proc/net/sockstat | grep UDP: UDP: inuse 3 mem 524288 <-- (INT_MAX + 1) >> 12 # ss -uam State Recv-Q ... UNCONN -2147482816 ... <-- INT_MAX + 831 bytes skmem:(r2147484480,rb2147483646,t0,tb212992,f3264,w0,o0,bl0,d14468947) So, let's define rmem and rcvbuf as unsigned int and check skb->truesize only when rcvbuf is large enough to lower the overflow possibility. Note that we still have a small chance to see overflow if multiple skbs to the same socket are processed on different core at the same time and each size does not exceed the limit but the total size does. Note also that we must ignore skb->truesize for a small buffer as explained in commit 363dc73acacb ("udp: be less conservative with sock rmem accounting").

In the Linux kernel, the following vulnerability has been resolved: cifs: Fix integer overflow while processing acdirmax mount option User-provided mount parameter acdirmax of type u32 is intended to have an upper limit, but before it is validated, the value is converted from seconds to jiffies which can lead to an integer overflow. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix page_size variable overflow Change all variables storing mlx5_umem_mkc_find_best_pgsz() result to unsigned long to support values larger than 31 and avoid overflow. For example: If we try to register 4GB of memory that is contiguous in physical memory, the driver will optimize the page_size and try to use an mkey with 4GB entity size. The 'unsigned int' page_size variable will overflow to '0' and we'll hit the WARN_ON() in alloc_cacheable_mr(). WARNING: CPU: 2 PID: 1203 at drivers/infiniband/hw/mlx5/mr.c:1124 alloc_cacheable_mr+0x22/0x580 [mlx5_ib] Modules linked in: mlx5_ib mlx5_core bonding ip6_gre ip6_tunnel tunnel6 ip_gre gre rdma_rxe rdma_ucm ib_uverbs ib_ipoib ib_umad rpcrdma ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_cm fuse ib_core [last unloaded: mlx5_core] CPU: 2 UID: 70878 PID: 1203 Comm: rdma_resource_l Tainted: G W 6.14.0-rc4-dirty #43 Tainted: [W]=WARN Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:alloc_cacheable_mr+0x22/0x580 [mlx5_ib] Code: 90 90 90 90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41 55 41 54 41 52 53 48 83 ec 30 f6 46 28 04 4c 8b 77 08 75 21 <0f> 0b 49 c7 c2 ea ff ff ff 48 8d 65 d0 4c 89 d0 5b 41 5a 41 5c 41 RSP: 0018:ffffc900006ffac8 EFLAGS: 00010246 RAX: 0000000004c0d0d0 RBX: ffff888217a22000 RCX: 0000000000100001 RDX: 00007fb7ac480000 RSI: ffff8882037b1240 RDI: ffff8882046f0600 RBP: ffffc900006ffb28 R08: 0000000000000001 R09: 0000000000000000 R10: 00000000000007e0 R11: ffffea0008011d40 R12: ffff8882037b1240 R13: ffff8882046f0600 R14: ffff888217a22000 R15: ffffc900006ffe00 FS: 00007fb7ed013340(0000) GS:ffff88885fd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fb7ed1d8000 CR3: 00000001fd8f6006 CR4: 0000000000772eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ? __warn+0x81/0x130 ? alloc_cacheable_mr+0x22/0x580 [mlx5_ib] ? report_bug+0xfc/0x1e0 ? handle_bug+0x55/0x90 ? exc_invalid_op+0x17/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? alloc_cacheable_mr+0x22/0x580 [mlx5_ib] create_real_mr+0x54/0x150 [mlx5_ib] ib_uverbs_reg_mr+0x17f/0x2a0 [ib_uverbs] ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0xca/0x140 [ib_uverbs] ib_uverbs_run_method+0x6d0/0x780 [ib_uverbs] ? __pfx_ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0x10/0x10 [ib_uverbs] ib_uverbs_cmd_verbs+0x19b/0x360 [ib_uverbs] ? walk_system_ram_range+0x79/0xd0 ? ___pte_offset_map+0x1b/0x110 ? __pte_offset_map_lock+0x80/0x100 ib_uverbs_ioctl+0xac/0x110 [ib_uverbs] __x64_sys_ioctl+0x94/0xb0 do_syscall_64+0x50/0x110 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7fb7ecf0737b Code: ff ff ff 85 c0 79 9b 49 c7 c4 ff ff ff ff 5b 5d 4c 89 e0 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 7d 2a 0f 00 f7 d8 64 89 01 48 RSP: 002b:00007ffdbe03ecc8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007ffdbe03edb8 RCX: 00007fb7ecf0737b RDX: 00007ffdbe03eda0 RSI: 00000000c0181b01 RDI: 0000000000000003 RBP: 00007ffdbe03ed80 R08: 00007fb7ecc84010 R09: 00007ffdbe03eed4 R10: 0000000000000009 R11: 0000000000000246 R12: 00007ffdbe03eed4 R13: 000000000000000c R14: 000000000000000c R15: 00007fb7ecc84150 </TASK>

In the Linux kernel, the following vulnerability has been resolved: ipv6: Fix signed integer overflow in __ip6_append_data Resurrect ubsan overflow checks and ubsan report this warning, fix it by change the variable [length] type to size_t. UBSAN: signed-integer-overflow in net/ipv6/ip6_output.c:1489:19 2147479552 + 8567 cannot be represented in type 'int' CPU: 0 PID: 253 Comm: err Not tainted 5.16.0+ #1 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0x214/0x230 show_stack+0x30/0x78 dump_stack_lvl+0xf8/0x118 dump_stack+0x18/0x30 ubsan_epilogue+0x18/0x60 handle_overflow+0xd0/0xf0 __ubsan_handle_add_overflow+0x34/0x44 __ip6_append_data.isra.48+0x1598/0x1688 ip6_append_data+0x128/0x260 udpv6_sendmsg+0x680/0xdd0 inet6_sendmsg+0x54/0x90 sock_sendmsg+0x70/0x88 ____sys_sendmsg+0xe8/0x368 ___sys_sendmsg+0x98/0xe0 __sys_sendmmsg+0xf4/0x3b8 __arm64_sys_sendmmsg+0x34/0x48 invoke_syscall+0x64/0x160 el0_svc_common.constprop.4+0x124/0x300 do_el0_svc+0x44/0xc8 el0_svc+0x3c/0x1e8 el0t_64_sync_handler+0x88/0xb0 el0t_64_sync+0x16c/0x170 Changes since v1: -Change the variable [length] type to unsigned, as Eric Dumazet suggested. Changes since v2: -Don't change exthdrlen type in ip6_make_skb, as Paolo Abeni suggested. Changes since v3: -Don't change ulen type in udpv6_sendmsg and l2tp_ip6_sendmsg, as Jakub Kicinski suggested.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix integer overflows on 32 bit systems On 32bit systems the addition operations in ipc_msg_alloc() can potentially overflow leading to memory corruption. Add bounds checking using KSMBD_IPC_MAX_PAYLOAD to avoid overflow.

In the Linux kernel, the following vulnerability has been resolved: cifs: Fix integer overflow while processing acregmax mount option User-provided mount parameter acregmax of type u32 is intended to have an upper limit, but before it is validated, the value is converted from seconds to jiffies which can lead to an integer overflow. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Prevent integer overflow in hdr_first_de() The "de_off" and "used" variables come from the disk so they both need to check. The problem is that on 32bit systems if they're both greater than UINT_MAX - 16 then the check does work as intended because of an integer overflow.

In the Linux kernel, the following vulnerability has been resolved: media: v4l2-dv-timings.c: fix too strict blanking sanity checks Sanity checks were added to verify the v4l2_bt_timings blanking fields in order to avoid integer overflows when userspace passes weird values. But that assumed that userspace would correctly fill in the front porch, backporch and sync values, but sometimes all you know is the total blanking, which is then assigned to just one of these fields. And that can fail with these checks. So instead set a maximum for the total horizontal and vertical blanking and check that each field remains below that. That is still sufficient to avoid integer overflows, but it also allows for more flexibility in how userspace fills in these fields.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_limit: reject configurations that cause integer overflow Reject bogus configs where internal token counter wraps around. This only occurs with very very large requests, such as 17gbyte/s. Its better to reject this rather than having incorrect ratelimit.

Vim is an improved version of the good old UNIX editor Vi. Heap-use-after-free in memory allocated in the function `ga_grow_inner` in in the file `src/alloc.c` at line 748, which is freed in the file `src/ex_docmd.c` in the function `do_cmdline` at line 1010 and then used again in `src/cmdhist.c` at line 759. When using the `:history` command, it's possible that the provided argument overflows the accepted value. Causing an Integer Overflow and potentially later an use-after-free. This vulnerability has been patched in version 9.0.2068.

The microweber application allows large characters to insert in the input field "fist & last name" which can allow attackers to cause a Denial of Service (DoS) via a crafted HTTP request. in microweber/microweber in GitHub repository microweber/microweber prior to 1.2.12.

in OpenHarmony v4.1.2 and prior versions allow a local attacker cause DOS through integer overflow.

TensorFlow is an end-to-end open source platform for machine learning. In affected versions the implementation of `tf.raw_ops.QuantizeAndDequantizeV4Grad` is vulnerable to an integer overflow issue caused by converting a signed integer value to an unsigned one and then allocating memory based on this value. The [implementation](https://github.com/tensorflow/tensorflow/blob/8d72537c6abf5a44103b57b9c2e22c14f5f49698/tensorflow/core/kernels/quantize_and_dequantize_op.cc#L126) uses the `axis` value as the size argument to `absl::InlinedVector` constructor. But, the constructor uses an unsigned type for the argument, so the implicit conversion transforms the negative value to a large integer. We have patched the issue in GitHub commit 96f364a1ca3009f98980021c4b32be5fdcca33a1. The fix will be included in TensorFlow 2.6.0. We will also cherrypick this commit on TensorFlow 2.5.1, and TensorFlow 2.4.3, as these are also affected and still in supported range.

A flaw was found in the sctp_make_strreset_req function in net/sctp/sm_make_chunk.c in the SCTP network protocol in the Linux kernel with a local user privilege access. In this flaw, an attempt to use more buffer than is allocated triggers a BUG_ON issue, leading to a denial of service (DOS).