Next.js before 13.4.20-canary.13 lacks a cache-control header and thus empty prefetch responses may sometimes be cached by a CDN, causing a denial of service to all users requesting the same URL via that CDN.
The ms package before 0.7.1 for Node.js allows attackers to cause a denial of service (CPU consumption) via a long version string, aka a "regular expression denial of service (ReDoS)."
Next.js is a React Framework for the Web. Cersions on the 10.x, 11.x, 12.x, 13.x, and 14.x branches before version 14.2.7 contain a vulnerability in the image optimization feature which allows for a potential Denial of Service (DoS) condition which could lead to excessive CPU consumption. Neither the `next.config.js` file that is configured with `images.unoptimized` set to `true` or `images.loader` set to a non-default value nor the Next.js application that is hosted on Vercel are affected. This issue was fully patched in Next.js `14.2.7`. As a workaround, ensure that the `next.config.js` file has either `images.unoptimized`, `images.loader` or `images.loaderFile` assigned.
Next.js is a React framework. Starting with version 12.0.0 and prior to version 12.0.9, vulnerable code could allow a bad actor to trigger a denial of service attack for anyone using i18n functionality. In order to be affected by this CVE, one must use next start or a custom server and the built-in i18n support. Deployments on Vercel, along with similar environments where invalid requests are filtered before reaching Next.js, are not affected. A patch has been released, `next@12.0.9`, that mitigates this issue. As a workaround, one may ensure `/${locale}/_next/` is blocked from reaching the Next.js instance until it becomes feasible to upgrade.
Next.js is a React framework for building full-stack web applications. Starting in version 10.0.0 and prior to version 16.1.7, the default Next.js image optimization disk cache (`/_next/image`) did not have a configurable upper bound, allowing unbounded cache growth. An attacker could generate many unique image-optimization variants and exhaust disk space, causing denial of service. This is fixed in version 16.1.7 by adding an LRU-backed disk cache with `images.maximumDiskCacheSize`, including eviction of least-recently-used entries when the limit is exceeded. Setting `maximumDiskCacheSize: 0` disables disk caching. If upgrading is not immediately possible, periodically clean `.next/cache/images` and/or reduce variant cardinality (e.g., tighten values for `images.localPatterns`, `images.remotePatterns`, and `images.qualities`).
Next.js is a React framework for building full-stack web applications. By sending a crafted HTTP request, it is possible to poison the cache of a non-dynamic server-side rendered route in the pages router (this does not affect the app router). When this crafted request is sent it could coerce Next.js to cache a route that is meant to not be cached and send a `Cache-Control: s-maxage=1, stale-while-revalidate` header which some upstream CDNs may cache as well. To be potentially affected all of the following must apply: 1. Next.js between 13.5.1 and 14.2.9, 2. Using pages router, & 3. Using non-dynamic server-side rendered routes e.g. `pages/dashboard.tsx` not `pages/blog/[slug].tsx`. This vulnerability was resolved in Next.js v13.5.7, v14.2.10, and later. We recommend upgrading regardless of whether you can reproduce the issue or not. There are no official or recommended workarounds for this issue, we recommend that users patch to a safe version.
Next.js is a React framework. In versions of Next.js prior to 12.0.5 or 11.1.3, invalid or malformed URLs could lead to a server crash. In order to be affected by this issue, the deployment must use Next.js versions above 11.1.0 and below 12.0.5, Node.js above 15.0.0, and next start or a custom server. Deployments on Vercel are not affected, along with similar environments where invalid requests are filtered before reaching Next.js. Versions 12.0.5 and 11.1.3 contain patches for this issue.
A vulnerability classified as problematic has been found in vercel hyper up to 3.4.1. This affects the function expand/braceExpand/ignoreMap of the file hyper/bin/rimraf-standalone.js. The manipulation leads to inefficient regular expression complexity. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.
It was found that the fix addressing CVE-2025-55184 in React Server Components was incomplete and does not prevent a denial of service attack in a specific case. React Server Components versions 19.0.2, 19.1.3 and 19.2.2 are affected, allowing unsafe deserialization of payloads from HTTP requests to Server Function endpoints. This can cause an infinite loop that hangs the server process and may prevent future HTTP requests from being served.
A denial of service vulnerability exists in Next.js versions with Partial Prerendering (PPR) enabled when running in minimal mode. The PPR resume endpoint accepts unauthenticated POST requests with the `Next-Resume: 1` header and processes attacker-controlled postponed state data. Two closely related vulnerabilities allow an attacker to crash the server process through memory exhaustion: 1. **Unbounded request body buffering**: The server buffers the entire POST request body into memory using `Buffer.concat()` without enforcing any size limit, allowing arbitrarily large payloads to exhaust available memory. 2. **Unbounded decompression (zipbomb)**: The resume data cache is decompressed using `inflateSync()` without limiting the decompressed output size. A small compressed payload can expand to hundreds of megabytes or gigabytes, causing memory exhaustion. Both attack vectors result in a fatal V8 out-of-memory error (`FATAL ERROR: Reached heap limit Allocation failed - JavaScript heap out of memory`) causing the Node.js process to terminate. The zipbomb variant is particularly dangerous as it can bypass reverse proxy request size limits while still causing large memory allocation on the server. To be affected you must have an application running with `experimental.ppr: true` or `cacheComponents: true` configured along with the NEXT_PRIVATE_MINIMAL_MODE=1 environment variable. Strongly consider upgrading to 15.6.0-canary.61 or 16.1.5 to reduce risk and prevent availability issues in Next applications.
A denial of service vulnerability exists in self-hosted Next.js applications that have `remotePatterns` configured for the Image Optimizer. The image optimization endpoint (`/_next/image`) loads external images entirely into memory without enforcing a maximum size limit, allowing an attacker to cause out-of-memory conditions by requesting optimization of arbitrarily large images. This vulnerability requires that `remotePatterns` is configured to allow image optimization from external domains and that the attacker can serve or control a large image on an allowed domain. Strongly consider upgrading to 15.5.10 or 16.1.5 to reduce risk and prevent availability issues in Next applications.
Next.js is a React framework for building full-stack web applications. From versions 15.0.4-canary.51 to before 15.1.8, a cache poisoning bug leading to a Denial of Service (DoS) condition was found in Next.js. This issue does not impact customers hosted on Vercel. Under certain conditions, this issue may allow a HTTP 204 response to be cached for static pages, leading to the 204 response being served to all users attempting to access the page. This issue has been addressed in version 15.1.8.
A pre-authentication denial of service vulnerability exists in React Server Components versions 19.0.0, 19.0.1 19.1.0, 19.1.1, 19.1.2, 19.2.0 and 19.2.1, including the following packages: react-server-dom-parcel, react-server-dom-turbopack, and react-server-dom-webpack. The vulnerable code unsafely deserializes payloads from HTTP requests to Server Function endpoints, which can cause an infinite loop that hangs the server process and may prevent future HTTP requests from being served.
Next.js is a React framework. A Denial of Service (DoS) condition was identified in Next.js. Exploitation of the bug can trigger a crash, affecting the availability of the server. his vulnerability was resolved in Next.js 13.5 and later.
Next.js is a React framework for building full-stack web applications. Starting in version 13.0.0 and prior to versions 13.5.8, 14.2.21, and 15.1.2, Next.js is vulnerable to a Denial of Service (DoS) attack that allows attackers to construct requests that leaves requests to Server Actions hanging until the hosting provider cancels the function execution. This vulnerability can also be used as a Denial of Wallet (DoW) attack when deployed in providers billing by response times. (Note: Next.js server is idle during that time and only keeps the connection open. CPU and memory footprint are low during that time.). Deployments without any protection against long running Server Action invocations are especially vulnerable. Hosting providers like Vercel or Netlify set a default maximum duration on function execution to reduce the risk of excessive billing. This is the same issue as if the incoming HTTP request has an invalid `Content-Length` header or never closes. If the host has no other mitigations to those then this vulnerability is novel. This vulnerability affects only Next.js deployments using Server Actions. The issue was resolved in Next.js 13.5.8, 14.2.21, and 15.1.2. We recommend that users upgrade to a safe version. There are no official workarounds.
Fileszie Check vulnerabilities allow a malicious user to bypass size limits or overload to the product. Affected products: ABB ASPECT - Enterprise v3.08.02; NEXUS Series v3.08.02; MATRIX Series v3.08.02
A vulnerability in the file descriptor handling of Cisco TelePresence Video Communication Server (VCS) Expressway could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to exhaustion of file descriptors while processing a high volume of traffic. An attacker could exploit this vulnerability by establishing a high number of concurrent TCP connections to the vulnerable system. An exploit could allow the attacker to cause a restart in a specific process, resulting in a temporary interruption of service. Cisco Bug IDs: CSCvh77056, CSCvh77058, CSCvh95264.
A vulnerability, which was classified as problematic, has been found in Tongda OA 2017 up to 11.7. This issue affects some unknown processing of the file /inc/package_static_resources.php. The manipulation leads to resource consumption. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.
A vulnerability in the egress packet processing functionality of the Cisco StarOS operating system for Cisco Aggregation Services Router (ASR) 5700 Series devices and Virtualized Packet Core (VPC) System Software could allow an unauthenticated, remote attacker to cause an interface on the device to cease forwarding packets. The device may need to be manually reloaded to clear this Interface Forwarding Denial of Service condition. The vulnerability is due to the failure to properly check that the length of a packet to transmit does not exceed the maximum supported length of the network interface card (NIC). An attacker could exploit this vulnerability by sending a crafted IP packet or a series of crafted IP fragments through an interface on the targeted device. A successful exploit could allow the attacker to cause the network interface to cease forwarding packets. This vulnerability could be triggered by either IPv4 or IPv6 network traffic. This vulnerability affects the following Cisco products when they are running the StarOS operating system and a virtual interface card is installed on the device: Aggregation Services Router (ASR) 5700 Series, Virtualized Packet Core-Distributed Instance (VPC-DI) System Software, Virtualized Packet Core-Single Instance (VPC-SI) System Software. Cisco Bug IDs: CSCvf32385.
Centova Cast 3.2.12 contains a denial of service vulnerability that allows attackers to overwhelm the system by repeatedly calling the database export API endpoint. Attackers can trigger 100% CPU load by sending multiple concurrent requests to the /api.php endpoint with crafted parameters.
When BIG-IP SSL Orchestrator is enabled, undisclosed traffic can cause the Traffic Management Microkernel (TMM) to terminate. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.
A flaw was discovered in Undertow in versions before Undertow 2.1.1.Final where certain requests to the "Expect: 100-continue" header may cause an out of memory error. This flaw may potentially lead to a denial of service.
A vulnerability was found in Keycloak before 11.0.1 where DoS attack is possible by sending twenty requests simultaneously to the specified keycloak server, all with a Content-Length header value that exceeds the actual byte count of the request body.
NVIDIA NeMo framework for Ubuntu contains a vulnerability in tools/asr_webapp where an attacker may cause an allocation of resources without limits or throttling. A successful exploit of this vulnerability may lead to a server-side denial of service.
A malicious client can send many DNS messages over TCP, potentially causing the server to become unstable while the attack is in progress. The server may recover after the attack ceases. Use of ACLs will not mitigate the attack. This issue affects BIND 9 versions 9.18.1 through 9.18.27, 9.19.0 through 9.19.24, and 9.18.11-S1 through 9.18.27-S1.
encoded_id-rails versions before 1.0.0.beta2 are affected by an uncontrolled resource consumption vulnerability. A remote and unauthenticated attacker might cause a denial of service condition by sending an HTTP request with an extremely long "id" parameter.
A vulnerability affecting HPE Networking Instant On Access Points has been identified where a device processing a specially crafted packet could enter a non-responsive state, in some cases requiring a hard reset to re-establish services. A malicious actor could leverage this vulnerability to conduct a Denial-of-Service attack on a target network.
HashiCorp Vault and Vault Enterprise 1.12.0 and newer are vulnerable to a denial of service through memory exhaustion of the host when handling large unauthenticated and authenticated HTTP requests from a client. Vault will attempt to map the request to memory, resulting in the exhaustion of available memory on the host, which may cause Vault to crash. Fixed in Vault 1.15.4, 1.14.8, 1.13.12.
A denial of service vulnerability was identified in GitLab CE/EE, affecting all versions from 15.11 prior to 16.6.7, 16.7 prior to 16.7.5 and 16.8 prior to 16.8.2 which allows an attacker to spike the GitLab instance resource usage resulting in service degradation.
To keep its cache database efficient, `named` running as a recursive resolver occasionally attempts to clean up the database. It uses several methods, including some that are asynchronous: a small chunk of memory pointing to the cache element that can be cleaned up is first allocated and then queued for later processing. It was discovered that if the resolver is continuously processing query patterns triggering this type of cache-database maintenance, `named` may not be able to handle the cleanup events in a timely manner. This in turn enables the list of queued cleanup events to grow infinitely large over time, allowing the configured `max-cache-size` limit to be significantly exceeded. This issue affects BIND 9 versions 9.16.0 through 9.16.45 and 9.16.8-S1 through 9.16.45-S1.
A flaw was found in CRI-O that involves an experimental annotation leading to a container being unconfined. This may allow a pod to specify and get any amount of memory/cpu, circumventing the kubernetes scheduler and potentially resulting in a denial of service in the node.
IBM 4769 Developers Toolkit 7.0.0 through 7.5.52 could allow a remote attacker to cause a denial of service in the Hardware Security Module (HSM) due to improper memory allocation of an excessive size.
IBM Db2 for Linux, UNIX and Windows (includes Db2 Connect Server) 11.5.0 - 11.5.9 and 12.1.0 - 12.1.3 is vulnerable to a denial of service as a trap may occur when selecting from certain types of tables.
Mattermost versions 10.4.x <= 10.4.2, 10.5.x <= 10.5.0, 9.11.x <= 9.11.10 fail to validate the uniqueness and quantity of task actions within the UpdateRunTaskActions GraphQL operation, which allows an attacker to create task items containing an excessive number of actions triggered by specific posts, overloading the server and leading to a denial-of-service (DoS) condition.
A vulnerability in ollama/ollama <=0.3.14 allows a malicious user to create a customized GGUF model file, upload it to the Ollama server, and create it. This can cause the server to allocate unlimited memory, leading to a Denial of Service (DoS) attack.
XMedia Recode 3.4.8.6 contains a denial of service vulnerability that allows attackers to crash the application by loading a specially crafted .m3u playlist file. Attackers can create a malicious .m3u file with an oversized buffer to trigger an application crash when the file is opened.
When a BIG-IP HTTP/2 httprouter profile is configured on a virtual server, undisclosed responses can cause an increase in memory resource utilization. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.
Some HTTP/2 implementations are vulnerable to window size manipulation and stream prioritization manipulation, potentially leading to a denial of service. The attacker requests a large amount of data from a specified resource over multiple streams. They manipulate window size and stream priority to force the server to queue the data in 1-byte chunks. Depending on how efficiently this data is queued, this can consume excess CPU, memory, or both.
A flaw was found in Undertow. When an AJP request is sent that exceeds the max-header-size attribute in ajp-listener, JBoss EAP is marked in an error state by mod_cluster in httpd, causing JBoss EAP to close the TCP connection without returning an AJP response. This happens because mod_proxy_cluster marks the JBoss EAP instance as an error worker when the TCP connection is closed from the backend after sending the AJP request without receiving an AJP response, and stops forwarding. This issue could allow a malicious user could to repeatedly send requests that exceed the max-header-size, causing a Denial of Service (DoS).
In OpenDDS through 3.27, there is a segmentation fault for a DataWriter with a large value of resource_limits.max_samples. NOTE: the vendor's position is that the product is not designed to handle a max_samples value that is too large for the amount of memory on the system.
DNN (formerly DotNetNuke) is an open-source web content management platform (CMS) in the Microsoft ecosystem. Possible denial of service with specially crafted information in the public registration form. This vulnerability is fixed in 9.13.8.
The Apollo Router Core is a configurable, high-performance graph router written in Rust to run a federated supergraph that uses Apollo Federation 2. A vulnerability in Apollo Router's usage of Apollo Compiler allowed queries with deeply nested and reused named fragments to be prohibitively expensive to validate. This could lead to excessive resource consumption and denial of service. Apollo Router's usage of Apollo Compiler has been updated so that validation logic processes each named fragment only once, preventing redundant traversal. This has been remediated in apollo-router versions 1.61.2 and 2.1.1.
In Connect2id Nimbus JOSE+JWT before 9.37.2, an attacker can cause a denial of service (resource consumption) via a large JWE p2c header value (aka iteration count) for the PasswordBasedDecrypter (PBKDF2) component.
IBM InfoSphere Information Server 11.7.0.0 through 11.7.1.6 could allow a remote attacker to cause a denial of service due to insufficient validation of incoming request resources.
A flaw was found in libsoup. The SoupWebsocketConnection may accept a large WebSocket message, which may cause libsoup to allocate memory and lead to a denial of service (DoS).
Bitcoin Core before 24.0.1 allows remote attackers to cause a denial of service (daemon crash) via a flood of low-difficulty header chains (aka a "Chain Width Expansion" attack) because a node does not first verify that a presented chain has enough work before committing to store it.
apollo-compiler is a query-based compiler for the GraphQL query language. Prior to 1.27.0, a vulnerability in Apollo Compiler allowed queries with deeply nested and reused named fragments to be prohibitively expensive to validate. Named fragments were being processed once per fragment spread in some cases during query validation, leading to exponential resource usage when deeply nested and reused fragments were involved. This could lead to excessive resource consumption and denial of service in applications. This vulnerability is fixed in 1.27.0.
The Apollo Router Core is a configurable, high-performance graph router written in Rust to run a federated supergraph that uses Apollo Federation 2. Prior to 1.61.2 and 2.1.1, a vulnerability in Apollo Router allowed queries with deeply nested and reused named fragments to be prohibitively expensive to query plan, specifically during named fragment expansion. Named fragments were being expanded once per fragment spread during query planning, leading to exponential resource usage when deeply nested and reused fragments were involved. This could lead to excessive resource consumption and denial of service. This has been remediated in apollo-router versions 1.61.2 and 2.1.1.
A vulnerability has been found in WEKA INTEREST Security Scanner up to 1.8 and classified as problematic. This vulnerability affects unknown code of the component Portscan. The manipulation with an unknown input leads to denial of service. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer
Apollo Gateway provides utilities for combining multiple GraphQL microservices into a single GraphQL endpoint. Prior to 2.10.1, a vulnerability in Apollo Gateway allowed queries with deeply nested and reused named fragments to be prohibitively expensive to query plan, specifically during named fragment expansion. Named fragments were being expanded once per fragment spread during query planning, leading to exponential resource usage when deeply nested and reused fragments were involved. This could lead to excessive resource consumption and denial of service. This has been remediated in @apollo/gateway version 2.10.1.