An OS command injection vulnerability exists in the api.cgi cmd.mvpn.x509.write functionality of peplink Surf SOHO HW1 v6.3.5 (in QEMU). A specially crafted HTTP request can lead to command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.This vulnerability is specifically for the `system` call in the file `/web/MANGA/cgi-bin/api.cgi` for firmware version 6.3.5 at offset 0x4bddb8.
A vulnerability in the software upgrade process of Cisco TelePresence Collaboration Endpoint Software and Cisco RoomOS Software could allow an authenticated, remote attacker to modify the filesystem to cause a denial of service (DoS) or gain privileged access to the root filesystem. The vulnerability is due to insufficient input validation. An attacker with administrative privileges could exploit this vulnerability by sending requests with malformed parameters to the system using the console, Secure Shell (SSH), or web API. A successful exploit could allow the attacker to modify the device configuration or cause a DoS.
A vulnerability in the Call Home feature of Cisco NX-OS Software could allow an authenticated, remote attacker to inject arbitrary commands that could be executed with root privileges on the underlying operating system (OS). The vulnerability is due to insufficient input validation of specific Call Home configuration parameters when the software is configured for transport method HTTP. An attacker could exploit this vulnerability by modifying parameters within the Call Home configuration on an affected device. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the underlying OS.
SUNNET WMPro portal's file management function has a vulnerability of insufficient filtering for user input. A remote attacker with administrator privilege or a privileged account can exploit this vulnerability to inject and execute arbitrary system commands to perform arbitrary system operations or disrupt service.
An OS command injection vulnerability exists in the device network settings functionality of reolink RLC-410W v3.0.0.136_20121102. At [6] the dns_data->dns2 variable, that has the value of the dns2 parameter provided through the SetLocalLink API, is not validated properly. This would lead to an OS command injection.
An OS command injection vulnerability exists in the device network settings functionality of reolink RLC-410W v3.0.0.136_20121102. At [4] the dns_data->dns1 variable, that has the value of the dns1 parameter provided through the SetLocal API, is not validated properly. This would lead to an OS command injection.
A vulnerability, which was classified as critical, has been found in Ruijie RG-UAC up to 20240428. Affected by this issue is some unknown functionality of the file /view/HAconfig/baseConfig/commit.php. The manipulation of the argument peer_ip/local_ip leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-263108. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
IBM Security Verify Governance, Identity Manager 10.0 could allow a remote authenticated attacker to execute arbitrary commands on the system by sending a specially crafted request. IBM X-Force ID: 257873.
Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Series Routers and Cisco Small Business RV016, RV042, and RV082 Routers could allow an authenticated, remote attacker with administrative privileges to execute arbitrary commands on an affected device. The vulnerabilities exist because the web-based management interface does not properly validate user-supplied input to scripts. An attacker with administrative privileges that are sufficient to log in to the web-based management interface could exploit each vulnerability by sending malicious requests to an affected device. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the underlying operating system.
An issue was discovered in Nagios XI 5.8.5. In the Manage Dashlets section of the Admin panel, an administrator can upload ZIP files. A command injection (within the name of the first file in the archive) allows an attacker to execute system commands.
OpenMage LTS is an e-commerce platform. Prior to versions 19.4.22 and 20.0.19, Magento admin users with access to the customer media could execute code on the server. Versions 19.4.22 and 20.0.19 contain a patch for this issue.
Authenticated command injection vulnerabilities exist in the ArubaOS command line interface. Successful exploitation of these vulnerabilities result in the ability to execute arbitrary commands as a privileged user on the underlying operating system.
Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Series Routers and Cisco Small Business RV016, RV042, and RV082 Routers could allow an authenticated, remote attacker with administrative privileges to execute arbitrary commands on an affected device. The vulnerabilities exist because the web-based management interface does not properly validate user-supplied input to scripts. An attacker with administrative privileges that are sufficient to log in to the web-based management interface could exploit each vulnerability by sending malicious requests to an affected device. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the underlying operating system.
A vulnerability in the web-based management interface of certain Cisco Small Business RV Series Routers could allow an authenticated, remote attacker with administrative privileges to inject arbitrary commands into the underlying operating system and execute them using root-level privileges. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending malicious input to a specific field in the web-based management interface of an affected device. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system as a user with root-level privileges.
The GLPI Agent is a generic management agent. Prior to version 1.5, if glpi-agent is running remoteinventory task against an Unix platform with ssh command, an administrator user on the remote can manage to inject a command in a specific workflow the agent would run with the privileges it uses. In the case, the agent is running with administration privileges, a malicious user could gain high privileges on the computer glpi-agent is running on. A malicious user could also disclose all remote accesses the agent is configured with for remoteinventory task. This vulnerability has been patched in glpi-agent 1.5.
NEC Corporation Aterm WX1500HP Ver.1.4.2 and earlier and WX3600HP Ver.1.5.3 and earlier allows a attacker to execute arbitrary OS commands via the network.
TN-4900 Series firmware versions v1.2.4 and prior and TN-5900 Series firmware versions v3.3 and prior are vulnerable to the command-injection vulnerability. This vulnerability stems from insufficient input validation in the certificate-generation function, which could potentially allow malicious users to execute remote code on affected devices.
AMI BMC contains a vulnerability in the SPX REST API, where an attacker with the required privileges can inject arbitrary shell commands, which may lead to code execution, denial of service, information disclosure, or data tampering. Â
A remote arbitrary command execution vulnerability was discovered in Aruba ClearPass Policy Manager version(s): ClearPass Policy Manager 6.10.x prior to 6.10.2 - - ClearPass Policy Manager 6.9.x prior to 6.9.7-HF1 - - ClearPass Policy Manager 6.8.x prior to 6.8.9-HF1. Aruba has released patches for ClearPass Policy Manager that address this security vulnerability.
AMI BMC contains a vulnerability in the SPX REST API, where an attacker with the required privileges can inject arbitrary shell commands, which may lead to code execution, denial of service, information disclosure, or data tampering.
Improper Neutralization of Special Elements used in an OS Command vulnerability in NEC Corporation Aterm WG2600HP2, WG2600HP, WG2200HP, WG1800HP2, WG1800HP, WG1400HP, WG600HP, WG300HP, WF300HP, WR9500N, WR9300N, WR8750N, WR8700N, WR8600N, WR8370N, WR8175N and WR8170N all versions allows a attacker to execute an arbitrary OS command with the root privilege, after obtaining a high privilege exploiting CVE-2023-3330 and CVE-2023-3331 vulnerabilities.
A vulnerability, which was classified as critical, has been found in Tenda AC8, AC10 and AC18 16.03.10.20. Affected by this issue is some unknown functionality of the file /goform/telnet of the component HTTP Request Handler. The manipulation leads to command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.
A command injection vulnerability in ModifyVLANItem of Trend Micro InterScan Web Security Virtual Appliance 6.5 SP2 could allow an authenticated, remote attacker to send specially crafted HTTP messages and execute arbitrary OS commands with elevated privileges.
A remote arbitrary command execution vulnerability was discovered in Aruba ClearPass Policy Manager version(s): ClearPass Policy Manager 6.10.x prior to 6.10.2 - - ClearPass Policy Manager 6.9.x prior to 6.9.7-HF1 - - ClearPass Policy Manager 6.8.x prior to 6.8.9-HF1. Aruba has released patches for ClearPass Policy Manager that address this security vulnerability.
A vulnerability was found in Ruijie RG-BCR860 2.5.13 and classified as critical. This issue affects some unknown processing of the component Network Diagnostic Page. The manipulation leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-232547. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
A remote arbitrary command execution vulnerability was discovered in Aruba ClearPass Policy Manager version(s): ClearPass Policy Manager 6.10.x prior to 6.10.2 - - ClearPass Policy Manager 6.9.x prior to 6.9.7-HF1 - - ClearPass Policy Manager 6.8.x prior to 6.8.9-HF1. Aruba has released patches for ClearPass Policy Manager that address this security vulnerability.
TN-5900 Series firmware versions v3.3 and prior are vulnerable to the command-injection vulnerability. This vulnerability stems from insufficient input validation and improper authentication in the certification-generation function, which could potentially allow malicious users to execute remote code on affected devices.
Vulnerability in the product Docsis 3.0 UBC1319BA00 Router supported affected version 1319010201r009. The vulnerability allows an attacker with privileges and network access through the ping.cmd component to execute commands on the device.
An issue was discovered in AudioCodes Device Manager Express through 7.8.20002.47752. BrowseFiles.php allows a ?cmd=ssh POST request with an ssh_command field that is executed.
IBM Security Verify Governance 10.0 could allow a remote authenticated attacker to execute arbitrary commands on the system by sending a specially crafted request. IBM X-Force ID: 256036.
An OS command injection vulnerability exists in the data.cgi xfer_dns functionality of peplink Surf SOHO HW1 v6.3.5 (in QEMU). A specially crafted HTTP request can lead to command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.
Authenticated command injection vulnerabilities exist in the AOS-CX Network Analytics Engine via NAE scripts. Successful exploitation of these vulnerabilities result in the ability to execute arbitrary commands as a privileged user on the underlying operating system, leading to a complete compromise of the switch running AOS-CX in ArubaOS-CX Switches version(s): AOS-CX 10.10.xxxx: 10.10.0002 and below, AOS-CX 10.09.xxxx: 10.09.1030 and below, AOS-CX 10.08.xxxx: 10.08.1070 and below, AOS-CX 10.06.xxxx: 10.06.0210 and below. Aruba has released upgrades for ArubaOS-CX Switch Devices that address these security vulnerabilities.
A vulnerability has been identified in CP-8031 MASTER MODULE (All versions < CPCI85 V05), CP-8050 MASTER MODULE (All versions < CPCI85 V05). The web interface of affected devices is vulnerable to command injection due to missing server side input sanitation. This could allow an authenticated privileged remote attacker to execute arbitrary code with root privileges.
Microsoft SharePoint Server Remote Code Execution Vulnerability
An authenticated OS command injection vulnerability exists in Netgear routers (tested on the DGN1000B model firmware versions 1.1.00.24 and 1.1.00.45) via the TimeToLive parameter in the setup.cgi endpoint. The vulnerability arises from improper input neutralization, enabling command injection through crafted POST requests. This flaw enables remote attackers to deploy payloads or manipulate system state post-authentication.
An OS Command Injection vulnerability in Parks Fiberlink 210 firmware version V2.1.14_X000 was found via the /boaform/admin/formPing target_addr parameter.
If exploited, the command injection vulnerability could allow remote attackers to execute arbitrary commands. This issue affects: QNAP Systems Inc. QTS versions prior to 4.4.3.1421 on build 20200907.
Improper neutralization of special elements used in an OS command ('OS Command Injection') vulnerability in task management component in Synology DiskStation Manager (DSM) before 6.2.4-25553 allows remote authenticated users to execute arbitrary commands via unspecified vectors.
If exploited, the command injection vulnerability could allow remote attackers to execute arbitrary commands. This issue affects: QNAP Systems Inc. QTS versions prior to 4.4.3.1421 on build 20200907.
A command injection vulnerability has been reported to affect QTS and QuTS hero. If exploited, this vulnerability allows attackers to execute arbitrary commands in a compromised application. QNAP have already fixed this vulnerability in the following versions: QTS 4.5.1.1456 build 20201015 (and later) QuTS hero h4.5.1.1472 build 20201031 (and later)
MXsecurity version 1.0 is vulnearble to command injection vulnerability. This vulnerability has been reported in the SSH CLI program, which can be exploited by attackers who have gained authorization privileges. The attackers can break out of the restricted shell and subsequently execute arbitrary code.
A remote arbitrary command execution vulnerability was discovered in Aruba SD-WAN Software and Gateways; Aruba Operating System Software version(s): Prior to 8.6.0.4-2.2.0.4; Prior to 8.7.1.4, 8.6.0.9, 8.5.0.13, 8.3.0.16, 6.5.4.20, 6.4.4.25. Aruba has released patches for Aruba SD-WAN Software and Gateways and ArubaOS that address this security vulnerability.
Certain NETGEAR devices are affected by command injection by an authenticated user. This affects RAX200 before 1.0.4.120, RAX75 before 1.0.4.120, RAX80 before 1.0.4.120, RBK852 before 3.2.17.12, RBR850 before 3.2.17.12, and RBS850 before 3.2.17.12.
A remote arbitrary command execution vulnerability was discovered in Aruba SD-WAN Software and Gateways; Aruba Operating System Software version(s): Prior to 8.6.0.4-2.2.0.4; Prior to 8.7.1.4, 8.6.0.9, 8.5.0.13, 8.3.0.16, 6.5.4.20, 6.4.4.25. Aruba has released patches for Aruba SD-WAN Software and Gateways and ArubaOS that address this security vulnerability.
A command injection was identified in PRTG 23.2.84.1566 and earlier versions in the Dicom C-ECHO sensor where an authenticated user with write permissions could abuse the debug option to write new files that could potentially get executed by the EXE/Script sensor. The severity of this vulnerability is high and received a score of 7.2 CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H
Certain NETGEAR devices are affected by command injection by an authenticated user. This affects R6250 before 1.0.4.36, R6300v2 before 1.0.4.36, R6400 before 1.0.1.50, R6400v2 before 1.0.2.66, R6700v3 before 1.0.2.66, R6700 before 1.0.2.8, R6900 before 1.0.2.8, R7000 before 1.0.9.88, R6900P before 1.3.2.132, R7100LG before 1.0.0.52, R7900 before 1.0.3.10, R8000 before 1.0.4.46, R7900P before 1.4.1.50, R8000P before 1.4.1.50, and RAX80 before 1.0.1.40.
A remote arbitrary command execution vulnerability was discovered in Aruba SD-WAN Software and Gateways; Aruba Operating System Software version(s): Prior to 8.6.0.4-2.2.0.4; Prior to 8.7.1.4, 8.6.0.9, 8.5.0.13, 8.3.0.16, 6.5.4.20, 6.4.4.25. Aruba has released patches for Aruba SD-WAN Software and Gateways and ArubaOS that address this security vulnerability.
Certain NETGEAR devices are affected by command injection by an authenticated user. This affects R6400 before 1.0.1.50, R7900P before 1.4.1.50, R8000P before 1.4.1.50, RAX75 before 1.0.1.62, and RAX80 before 1.0.1.62.
An OS command injection vulnerability has been reported to affect Container Station. If exploited, the vulnerability could allow authenticated administrators to execute commands via a network. We have already fixed the vulnerability in the following version: Container Station 2.6.7.44 and later
A remote arbitrary command execution vulnerability was discovered in Aruba SD-WAN Software and Gateways; Aruba Operating System Software version(s): Prior to 8.6.0.4-2.2.0.6; Prior to 8.7.1.4, 8.6.0.7, 8.5.0.12, 8.3.0.16. Aruba has released patches for Aruba SD-WAN Software and Gateways and ArubaOS that address this security vulnerability.