OpenClaw before 2026.3.31 contains an allowlist bypass vulnerability in Matrix thread root and reply context handling that fails to properly validate message senders. Attackers can fetch thread-root and reply context messages that should be filtered by sender allowlists, bypassing access controls.

OpenClaw before 2026.3.31 contains an authentication boundary vulnerability where Telegram legacy allowFrom migration incorrectly fans default-account trust into all named accounts. Attackers can exploit this trust propagation to bypass authentication controls and gain unauthorized access to named accounts.

OpenClaw before 2026.3.25 contains a missing rate limiting vulnerability in Telegram webhook authentication that allows attackers to brute-force weak webhook secrets. The vulnerability enables repeated authentication guesses without throttling, permitting attackers to systematically guess webhook secrets through brute-force attacks.

OpenClaw before 2026.3.25 contains a pre-authentication rate-limit bypass vulnerability in webhook token validation that allows attackers to brute-force weak webhook secrets. The vulnerability exists because invalid webhook tokens are rejected without throttling repeated authentication attempts, enabling attackers to guess weak tokens through rapid successive requests.

OpenClaw before 2026.3.28 contains a missing rate limiting vulnerability in the Nextcloud Talk webhook authentication that allows attackers to brute-force weak shared secrets. Attackers who can reach the webhook endpoint can exploit this to forge inbound webhook events by repeatedly attempting authentication without throttling.

OpenClaw versions prior to 2026.2.22 with the optional BlueBubbles plugin contain an access control bypass vulnerability where empty allowFrom configuration causes dmPolicy pairing and allowlist restrictions to be ineffective. Remote attackers can send direct messages to BlueBubbles accounts by exploiting the misconfigured allowlist validation logic to bypass intended sender authorization checks.

OpenClaw before 2026.3.31 contains a configuration management vulnerability where startup migration treats empty-array settings as missing values. Attackers can restart the application to rehydrate revoked Tlon configuration from file state, bypassing intended revocation controls.

OpenClaw before 2026.3.22 contains an authentication bypass vulnerability in the X-Forwarded-For header processing when trustedProxies is configured, allowing attackers to spoof loopback hops. Remote attackers can inject forged forwarding headers to bypass canvas authentication and rate-limiting protections by masquerading as loopback clients.

OpenClaw before 2026.3.25 contains a missing rate limiting vulnerability in webhook authentication that allows attackers to brute-force weak webhook passwords without throttling. Remote attackers can repeatedly submit incorrect password guesses to the webhook endpoint to compromise authentication and gain unauthorized access.

OpenClaw before 2026.3.22 contains a settings reconciliation vulnerability that allows attackers to bypass intended deny-all revocations by exploiting empty allowlist handling. The vulnerability treats explicit empty allowlists as unset during reconciliation, silently undoing intended access control denials and restoring previously revoked permissions.

OpenClaw before 2026.3.22 contains a webhook path route replacement vulnerability in the Synology Chat extension that allows attackers to collapse multi-account configurations onto shared webhook paths. Attackers can exploit inherited or duplicate webhook paths to bypass per-account DM access control policies and replace route ownership across accounts.

OpenClaw before 2026.3.12 applies rate limiting only after successful webhook authentication, allowing attackers to bypass rate limits and brute-force webhook secrets. Attackers can submit repeated authentication requests with invalid secrets without triggering rate limit responses, enabling systematic secret guessing and subsequent forged webhook submission.

OpenClaw versions prior to 2026.2.22 contain an authorization bypass vulnerability in the Feishu allowFrom allowlist implementation that accepts mutable sender display names instead of enforcing ID-only matching. An attacker can set a display name equal to an allowlisted ID string to bypass authorization checks and gain unauthorized access.

OpenClaw versions prior to 2026.2.26 server-http contains an authentication bypass vulnerability in gateway authentication for plugin channel endpoints due to path canonicalization mismatch between the gateway guard and plugin handler routing. Attackers can bypass authentication by sending requests with alternative path encodings to access protected plugin channel APIs without proper gateway authentication.

OpenClaw versions prior to 2026.2.13 use non-constant-time string comparison for hook token validation, allowing attackers to infer tokens through timing measurements. Remote attackers with network access to the hooks endpoint can exploit timing side-channels across multiple requests to gradually recover the authentication token.

OpenClaw versions prior to 2026.2.14 contain an authorization bypass vulnerability where Telegram allowlist matching accepts mutable usernames instead of immutable numeric sender IDs. Attackers can spoof identity by obtaining recycled usernames to bypass allowlist restrictions and interact with bots as unauthorized senders.

OpenClaw versions prior to 2026.2.14 contain a webhook signature-verification bypass in the voice-call extension that allows unauthenticated requests when the tunnel.allowNgrokFreeTierLoopbackBypass option is explicitly enabled. An external attacker can send forged requests to the publicly reachable webhook endpoint without a valid X-Twilio-Signature header, resulting in unauthorized webhook event handling and potential request flooding attacks.

OpenClaw versions prior to 2026.2.12 contain a vulnerability in the BlueBubbles (optional plugin) webhook handler in which it authenticates requests based solely on loopback remoteAddress without validating forwarding headers, allowing bypass of configured webhook passwords. When the gateway operates behind a reverse proxy, unauthenticated remote attackers can inject arbitrary BlueBubbles message and reaction events by reaching the proxy endpoint.

OpenClaw version 2026.1.20 prior to 2026.2.1 contains a vulnerability in the Browser Relay (extension must be installed and enabled) /cdp WebSocket endpoint in which it does not require authentication tokens, allowing websites to connect via loopback and access sensitive data. Attackers can exploit this by connecting to ws://127.0.0.1:18792/cdp to steal session cookies and execute JavaScript in other browser tabs.

OpenClaw is a personal AI assistant. Prior to 2026.1.20, an unauthenticated local client could use the Gateway WebSocket API to write config via config.apply and set unsafe cliPath values that were later used for command discovery, enabling command injection as the gateway user. This vulnerability is fixed in 2026.1.20.

OpenClaw versions prior to 2026.2.22 inject the x-OpenClaw-relay-token header into Chrome CDP probe traffic on loopback interfaces, allowing local processes to capture the Gateway authentication token. An attacker controlling a loopback port can intercept CDP reachability probes to the /json/version endpoint and reuse the leaked token as Gateway bearer authentication.

OpenClaw versions prior to 2026.3.1 fail to properly handle authentication bootstrap errors during startup, allowing browser-control routes to remain accessible without authentication. Local processes or loopback-reachable SSRF paths can exploit this to access browser-control routes including evaluate-capable actions without valid credentials.

OpenClaw versions prior to 2026.2.21 sandbox browser entrypoint launches x11vnc without authentication for noVNC observer sessions, allowing unauthenticated access to the VNC interface. Remote attackers on the host loopback interface can connect to the exposed noVNC port to observe or interact with the sandbox browser without credentials.

OpenClaw versions 2026.1.29-beta.1 prior to 2026.2.14 contain a vulnerability in the sandbox browser bridge server in which it accepts requests without requiring gateway authentication, allowing local attackers to access browser control endpoints. A local attacker can enumerate tabs, retrieve WebSocket URLs, execute JavaScript, and exfiltrate cookies and session data from authenticated browser contexts.

OpenClaw versions prior to 2026.2.2 contain a vulnerability in the gateway WebSocket connect handshake in which it allows skipping device identity checks when auth.token is present but not validated. Attackers can connect to the gateway without providing device identity or pairing by exploiting the presence check instead of validation, potentially gaining operator access in vulnerable deployments.

OpenClaw versions 2026.1.5 prior to 2026.2.12 fail to enforce mandatory authentication on the /agent/act browser-control HTTP route, allowing unauthorized local callers to invoke privileged operations. Remote attackers on the local network or local processes can execute arbitrary browser-context actions and access sensitive in-session data by sending requests to unauthenticated endpoints.

OpenClaw versions prior to 2026.2.12 with the optional Nostr plugin enabled expose unauthenticated HTTP endpoints at /api/channels/nostr/:accountId/profile and /api/channels/nostr/:accountId/profile/import that allow reading and modifying Nostr profiles without gateway authentication. Remote attackers can exploit these endpoints to read sensitive profile data, modify Nostr profiles, persist malicious changes to gateway configuration, and publish signed Nostr events using the bot's private key when the gateway HTTP port is accessible beyond localhost.

OpenClaw is a personal AI assistant. Versions 2026.2.13 and below allow the optional @openclaw/voice-call plugin Telnyx webhook handler to accept unsigned inbound webhook requests when telnyx.publicKey is not configured, enabling unauthenticated callers to forge Telnyx events. Telnyx webhooks are expected to be authenticated via Ed25519 signature verification. In affected versions, TelnyxProvider.verifyWebhook() could effectively fail open when no Telnyx public key was configured, allowing arbitrary HTTP POST requests to the voice-call webhook endpoint to be treated as legitimate Telnyx events. This only impacts deployments where the Voice Call plugin is installed, enabled, and the webhook endpoint is reachable from the attacker (for example, publicly exposed via a tunnel/proxy). The issue has been fixed in version 2026.2.14.

The Aqara Cloud Developer Portal (developer.aqara.com) issued a developer token to any email address supplied by the attacker. This is an instance of "CWE-306: Missing Authentication for Critical Function" with an estimated CVSS of CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:N (6.5 Medium). When combined with CVE-2026-50083, CVE-2026-50084, and CVE-2026-50085, any otherwise-unauthenticated attacker could execute a full takeover of affected devices.

The Datalogic DXU service on (for example) DL-Axist devices does not require authentication for configuration changes or disclosure of configuration settings.

Rubygems.org is the Ruby community's gem hosting service. Rubygems.org users with MFA enabled would normally be protected from account takeover in the case of email account takeover. However, a workaround on the forgotten password form allows an attacker to bypass the MFA requirement and takeover the account. This vulnerability has been patched in commit 0b3272a.

The ISOinsight from Netvision has a Missing Authentication vulnerability, allowing unauthenticated remote attackers to access certain system functions. These functions include viewing the administrator list, viewing and editing IP settings, and uploading files.

An authentication bypass vulnerability was identified in GitHub Enterprise Server that allowed an unauthenticated attacker to create a local user account, bypassing the configured external identity provider. When external authentication was enabled, the signup endpoint did not properly enforce the authentication restriction, allowing account creation and session establishment without identity provider validation. The created account was limited to the default base permissions configured on the instance. Exploitation required network access to a GHES instance configured with an external authentication provider. This vulnerability affected all versions of GitHub Enterprise Server prior to 3.21 and was fixed in versions 3.20.2, 3.19.6, 3.18.9, 3.17.15, and 3.16.18.

FreeScout is a free help desk and shared inbox built with PHP's Laravel framework. Prior to 1.8.212, the endpoint GET /thread/read/{conversation_id}/{thread_id} does not require authentication and does not validate whether the given thread_id belongs to the given conversation_id. This allows any unauthenticated attacker to mark any thread as read by passing arbitrary IDs, enumerate valid thread IDs via HTTP response codes (200 vs 404), and manipulate opened_at timestamps across conversations (IDOR). This vulnerability is fixed in 1.8.212.

Missing Authentication for Critical Function vulnerability in Drupal AJAX Dashboard allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects AJAX Dashboard: from 0.0.0 before 3.1.0.

Chartbrew is an open-source web application that can connect directly to databases and APIs and use the data to create charts. In version 4.9.0, the endpoint POST /user/invited does not validate any invite token, authentication header, or session. Any unauthenticated attacker can call this endpoint directly to create a fully active account and receive a valid JWT — even when the instance has existing users and signupRestricted is enabled. This bypass is distinct from the normal registration endpoint (POST /user) which enforces signupRestricted and sets active: false pending verification. This issue has been patched in version 5.0.0.

Craft CMS is a content management system (CMS). From version 4.0.0-RC1 to before version 4.17.8 and from version 5.0.0-RC1 to before version 5.9.14, guest users can access Config Sync updater index, obtain signed data, and execute state-changing Config Sync actions (regenerate-yaml, apply-yaml-changes) without authentication. This issue has been patched in versions 4.17.8 and 5.9.14.

Indico is an event management system that uses Flask-Multipass, a multi-backend authentication system for Flask. In versions prior to 3.3.11, the API endpoint used to manage event series is missing an access check, allowing unauthenticated/unauthorized access to this endpoint. The impact of this is limited to getting the metadata (title, category chain, start/end date) for events in an existing series, deleting an existing event series, and modifying an existing event series. This vulnerability does NOT allow unauthorized access to events (beyond the basic metadata mentioned above), nor any kind of tampering with user-visible data in events. Version 3.3.11 fixes the issue. As a workaround, use the webserver to restrict access to the series management API endpoint.

The Link Whisper Free WordPress plugin before 0.9.1 has a publicly accessible REST endpoint that allows unauthenticated settings updates.

IBM Sterling B2B Integrator and IBM Sterling File Gateway 6.1.0.0 through 6.1.2.7_2, 6.2.0.0 through 6.2.0.5_1, 6.2.1.0 through 6.2.1.1_1, and 6.2.2.0 allows a remote unauthenticated attacker to view and delete the partners of a community and to delete the communities.

Dockyard is a Docker container management app. Prior to 1.1.0, Docker container start and stop operations are performed through GET requests without CSRF protection. A remote attacker can cause a logged-in administrator's browser to request /apps/action.php?action=stop&name=<container> or /apps/action.php?action=start&name=<container>, which starts or stops the target container. This vulnerability is fixed in 1.1.0.

The SSL Zen WordPress plugin before 4.6.0 does not properly prevent directory listing of the private keys folder, as it only relies on the use of .htaccess to prevent visitors from accessing the site's generated private keys, which allows an attacker to read them if the site runs on a server who doesn't support .htaccess files, like NGINX.

Missing Authentication for Critical Function vulnerability in Drupal Panels allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Panels: from 0.0.0 before 4.9.0.

A denial of service vulnerability exists in the Modbus RTU over TCP functionality of Socomec DIRIS Digiware M-70 1.6.9. A specially crafted network packet can lead to denial of service and weaken credentials resulting in default documented credentials being applied to the device. An attacker can send an unauthenticated packet to trigger this vulnerability.

Fluent Bit in_forward input plugin does not properly enforce the security.users authentication mechanism under certain configuration conditions. This allows remote attackers with network access to the Fluent Bit instance exposing the forward input to send unauthenticated data. By bypassing authentication controls, attackers can inject forged log records, flood alerting systems, or manipulate routing decisions, compromising the authenticity and integrity of ingested logs.

Trendnet AC2600 TEW-827DRU version 2.08B01 lacks proper authentication to the bittorrent functionality. If enabled, anyone is able to visit and modify settings and files via the Bittorent web client by visiting: http://192.168.10.1:9091/transmission/web/

Multiple vulnerabilities in Cisco Application Services Engine could allow an unauthenticated, remote attacker to gain privileged access to host-level operations or to learn device-specific information, create diagnostic files, and make limited configuration changes. For more information about these vulnerabilities, see the Details section of this advisory.

Cisco Finesse, Cisco Virtualized Voice Browser, and Cisco Unified CVP OpenSocial Gadget Editor Unauthenticated Access Vulnerability A vulnerability in the web management interface of Cisco Finesse, Cisco Virtualized Voice Browser, and Cisco Unified CVP could allow an unauthenticated, remote attacker to access the OpenSocial Gadget Editor without providing valid user credentials. The vulnerability is due to missing authentication for a specific section of the web-based management interface. An attacker could exploit this vulnerability by accessing a crafted URL. A successful exploit could allow the attacker to obtain access to a section of the interface, which they could use to obtain potentially confidential information and create arbitrary XML files. Cisco&nbsp;has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.

A vulnerability in the web-based management interface of Cisco Vision Dynamic Signage Director could allow an unauthenticated, remote attacker to access confidential information or make configuration changes. The vulnerability is due to missing authentication for a specific section of the web-based management interface. An attacker could exploit this vulnerability by accessing a crafted URL. A successful exploit could allow the attacker to obtain access to a section of the interface, which they could use to read confidential information or make configuration changes.

The default configuration of Crimson 3.1 (Build versions prior to 3119.001) allows a user to be able to read and modify the database without authentication.