GNU Binutils thru 2.45.1 readelf contains a denial-of-service vulnerability when processing a crafted binary with malformed DWARF .debug_rnglists data. A logic flaw in the DWARF parsing path causes readelf to repeatedly print the same warning message without making forward progress, resulting in a non-terminating output loop that requires manual interruption. No evidence of memory corruption or code execution was observed.

In the Linux kernel, the following vulnerability has been resolved: can: mcp251xfd: fix infinite loop when xmit fails When the mcp251xfd_start_xmit() function fails, the driver stops processing messages, and the interrupt routine does not return, running indefinitely even after killing the running application. Error messages: [ 441.298819] mcp251xfd spi2.0 can0: ERROR in mcp251xfd_start_xmit: -16 [ 441.306498] mcp251xfd spi2.0 can0: Transmit Event FIFO buffer not empty. (seq=0x000017c7, tef_tail=0x000017cf, tef_head=0x000017d0, tx_head=0x000017d3). ... and repeat forever. The issue can be triggered when multiple devices share the same SPI interface. And there is concurrent access to the bus. The problem occurs because tx_ring->head increments even if mcp251xfd_start_xmit() fails. Consequently, the driver skips one TX package while still expecting a response in mcp251xfd_handle_tefif_one(). Resolve the issue by starting a workqueue to write the tx obj synchronously if err = -EBUSY. In case of another error, decrement tx_ring->head, remove skb from the echo stack, and drop the message. [mkl: use more imperative wording in patch description]

In the Linux kernel, the following vulnerability has been resolved: batman-adv: Avoid infinite loop trying to resize local TT If the MTU of one of an attached interface becomes too small to transmit the local translation table then it must be resized to fit inside all fragments (when enabled) or a single packet. But if the MTU becomes too low to transmit even the header + the VLAN specific part then the resizing of the local TT will never succeed. This can for example happen when the usable space is 110 bytes and 11 VLANs are on top of batman-adv. In this case, at least 116 byte would be needed. There will just be an endless spam of batman_adv: batadv0: Forced to purge local tt entries to fit new maximum fragment MTU (110) in the log but the function will never finish. Problem here is that the timeout will be halved all the time and will then stagnate at 0 and therefore never be able to reduce the table even more. There are other scenarios possible with a similar result. The number of BATADV_TT_CLIENT_NOPURGE entries in the local TT can for example be too high to fit inside a packet. Such a scenario can therefore happen also with only a single VLAN + 7 non-purgable addresses - requiring at least 120 bytes. While this should be handled proactively when: * interface with too low MTU is added * VLAN is added * non-purgeable local mac is added * MTU of an attached interface is reduced * fragmentation setting gets disabled (which most likely requires dropping attached interfaces) not all of these scenarios can be prevented because batman-adv is only consuming events without the the possibility to prevent these actions (non-purgable MAC address added, MTU of an attached interface is reduced). It is therefore necessary to also make sure that the code is able to handle also the situations when there were already incompatible system configuration are present.

In the Linux kernel, the following vulnerability has been resolved: virtio_net: Do not send RSS key if it is not supported There is a bug when setting the RSS options in virtio_net that can break the whole machine, getting the kernel into an infinite loop. Running the following command in any QEMU virtual machine with virtionet will reproduce this problem: # ethtool -X eth0 hfunc toeplitz This is how the problem happens: 1) ethtool_set_rxfh() calls virtnet_set_rxfh() 2) virtnet_set_rxfh() calls virtnet_commit_rss_command() 3) virtnet_commit_rss_command() populates 4 entries for the rss scatter-gather 4) Since the command above does not have a key, then the last scatter-gatter entry will be zeroed, since rss_key_size == 0. sg_buf_size = vi->rss_key_size; 5) This buffer is passed to qemu, but qemu is not happy with a buffer with zero length, and do the following in virtqueue_map_desc() (QEMU function): if (!sz) { virtio_error(vdev, "virtio: zero sized buffers are not allowed"); 6) virtio_error() (also QEMU function) set the device as broken vdev->broken = true; 7) Qemu bails out, and do not repond this crazy kernel. 8) The kernel is waiting for the response to come back (function virtnet_send_command()) 9) The kernel is waiting doing the following : while (!virtqueue_get_buf(vi->cvq, &tmp) && !virtqueue_is_broken(vi->cvq)) cpu_relax(); 10) None of the following functions above is true, thus, the kernel loops here forever. Keeping in mind that virtqueue_is_broken() does not look at the qemu `vdev->broken`, so, it never realizes that the vitio is broken at QEMU side. Fix it by not sending RSS commands if the feature is not available in the device.

QEMU (aka Quick Emulator) built with the ColdFire Fast Ethernet Controller emulator support is vulnerable to an infinite loop issue. It could occur while receiving packets in 'mcf_fec_receive'. A privileged user/process inside guest could use this issue to crash the QEMU process on the host leading to DoS.

When GNOME Dia before 2019-11-27 is launched with a filename argument that is not a valid codepoint in the current encoding, it enters an endless loop, thus endlessly writing text to stdout. If this launch is from a thumbnailer service, this output will usually be written to disk via the system's logging facility (potentially with elevated privileges), thus filling up the disk and eventually rendering the system unusable. (The filename can be for a nonexistent file.) NOTE: this does not affect an upstream release, but affects certain Linux distribution packages with version numbers such as 0.97.3.

In the Linux kernel, the following vulnerability has been resolved: page_pool: avoid infinite loop to schedule delayed worker We noticed the kworker in page_pool_release_retry() was waken up repeatedly and infinitely in production because of the buggy driver causing the inflight less than 0 and warning us in page_pool_inflight()[1]. Since the inflight value goes negative, it means we should not expect the whole page_pool to get back to work normally. This patch mitigates the adverse effect by not rescheduling the kworker when detecting the inflight negative in page_pool_release_retry(). [1] [Mon Feb 10 20:36:11 2025] ------------[ cut here ]------------ [Mon Feb 10 20:36:11 2025] Negative(-51446) inflight packet-pages ... [Mon Feb 10 20:36:11 2025] Call Trace: [Mon Feb 10 20:36:11 2025] page_pool_release_retry+0x23/0x70 [Mon Feb 10 20:36:11 2025] process_one_work+0x1b1/0x370 [Mon Feb 10 20:36:11 2025] worker_thread+0x37/0x3a0 [Mon Feb 10 20:36:11 2025] kthread+0x11a/0x140 [Mon Feb 10 20:36:11 2025] ? process_one_work+0x370/0x370 [Mon Feb 10 20:36:11 2025] ? __kthread_cancel_work+0x40/0x40 [Mon Feb 10 20:36:11 2025] ret_from_fork+0x35/0x40 [Mon Feb 10 20:36:11 2025] ---[ end trace ebffe800f33e7e34 ]--- Note: before this patch, the above calltrace would flood the dmesg due to repeated reschedule of release_dw kworker.

An issue was discovered in Xen through 4.12.x allowing Arm domU attackers to cause a denial of service (infinite loop) involving a LoadExcl or StoreExcl operation.

The fuse_fill_write_pages function in fs/fuse/file.c in the Linux kernel before 4.4 allows local users to cause a denial of service (infinite loop) via a writev system call that triggers a zero length for the first segment of an iov.

The ehci_process_itd function in hw/usb/hcd-ehci.c in QEMU allows local guest OS administrators to cause a denial of service (infinite loop and CPU consumption) via a circular isochronous transfer descriptor (iTD) list.

In the Linux kernel, the following vulnerability has been resolved: ubi: ubi_wl_put_peb: Fix infinite loop when wear-leveling work failed Following process will trigger an infinite loop in ubi_wl_put_peb(): ubifs_bgt ubi_bgt ubifs_leb_unmap ubi_leb_unmap ubi_eba_unmap_leb ubi_wl_put_peb wear_leveling_worker e1 = rb_entry(rb_first(&ubi->used) e2 = get_peb_for_wl(ubi) ubi_io_read_vid_hdr // return err (flash fault) out_error: ubi->move_from = ubi->move_to = NULL wl_entry_destroy(ubi, e1) ubi->lookuptbl[e->pnum] = NULL retry: e = ubi->lookuptbl[pnum]; // return NULL if (e == ubi->move_from) { // NULL == NULL gets true goto retry; // infinite loop !!! $ top PID USER PR NI VIRT RES SHR S %CPU %MEM COMMAND 7676 root 20 0 0 0 0 R 100.0 0.0 ubifs_bgt0_0 Fix it by: 1) Letting ubi_wl_put_peb() returns directly if wearl leveling entry has been removed from 'ubi->lookuptbl'. 2) Using 'ubi->wl_lock' protecting wl entry deletion to preventing an use-after-free problem for wl entry in ubi_wl_put_peb(). Fetch a reproducer in [Link].

A vulnerability was found in libX11 due to an infinite loop within the PutSubImage() function. This flaw allows a local user to consume all available system resources and cause a denial of service condition.

In the Linux kernel, the following vulnerability has been resolved: ext4: fix task hung in ext4_xattr_delete_inode Syzbot reported a hung task problem: ================================================================== INFO: task syz-executor232:5073 blocked for more than 143 seconds. Not tainted 6.2.0-rc2-syzkaller-00024-g512dee0c00ad #0 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:syz-exec232 state:D stack:21024 pid:5073 ppid:5072 flags:0x00004004 Call Trace: <TASK> context_switch kernel/sched/core.c:5244 [inline] __schedule+0x995/0xe20 kernel/sched/core.c:6555 schedule+0xcb/0x190 kernel/sched/core.c:6631 __wait_on_freeing_inode fs/inode.c:2196 [inline] find_inode_fast+0x35a/0x4c0 fs/inode.c:950 iget_locked+0xb1/0x830 fs/inode.c:1273 __ext4_iget+0x22e/0x3ed0 fs/ext4/inode.c:4861 ext4_xattr_inode_iget+0x68/0x4e0 fs/ext4/xattr.c:389 ext4_xattr_inode_dec_ref_all+0x1a7/0xe50 fs/ext4/xattr.c:1148 ext4_xattr_delete_inode+0xb04/0xcd0 fs/ext4/xattr.c:2880 ext4_evict_inode+0xd7c/0x10b0 fs/ext4/inode.c:296 evict+0x2a4/0x620 fs/inode.c:664 ext4_orphan_cleanup+0xb60/0x1340 fs/ext4/orphan.c:474 __ext4_fill_super fs/ext4/super.c:5516 [inline] ext4_fill_super+0x81cd/0x8700 fs/ext4/super.c:5644 get_tree_bdev+0x400/0x620 fs/super.c:1282 vfs_get_tree+0x88/0x270 fs/super.c:1489 do_new_mount+0x289/0xad0 fs/namespace.c:3145 do_mount fs/namespace.c:3488 [inline] __do_sys_mount fs/namespace.c:3697 [inline] __se_sys_mount+0x2d3/0x3c0 fs/namespace.c:3674 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7fa5406fd5ea RSP: 002b:00007ffc7232f968 EFLAGS: 00000202 ORIG_RAX: 00000000000000a5 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fa5406fd5ea RDX: 0000000020000440 RSI: 0000000020000000 RDI: 00007ffc7232f970 RBP: 00007ffc7232f970 R08: 00007ffc7232f9b0 R09: 0000000000000432 R10: 0000000000804a03 R11: 0000000000000202 R12: 0000000000000004 R13: 0000555556a7a2c0 R14: 00007ffc7232f9b0 R15: 0000000000000000 </TASK> ================================================================== The problem is that the inode contains an xattr entry with ea_inum of 15 when cleaning up an orphan inode <15>. When evict inode <15>, the reference counting of the corresponding EA inode is decreased. When EA inode <15> is found by find_inode_fast() in __ext4_iget(), it is found that the EA inode holds the I_FREEING flag and waits for the EA inode to complete deletion. As a result, when inode <15> is being deleted, we wait for inode <15> to complete the deletion, resulting in an infinite loop and triggering Hung Task. To solve this problem, we only need to check whether the ino of EA inode and parent is the same before getting EA inode.

In the Linux kernel, the following vulnerability has been resolved: PM / devfreq: Synchronize devfreq_monitor_[start/stop] There is a chance if a frequent switch of the governor done in a loop result in timer list corruption where timer cancel being done from two place one from cancel_delayed_work_sync() and followed by expire_timers() can be seen from the traces[1]. while true do echo "simple_ondemand" > /sys/class/devfreq/1d84000.ufshc/governor echo "performance" > /sys/class/devfreq/1d84000.ufshc/governor done It looks to be issue with devfreq driver where device_monitor_[start/stop] need to synchronized so that delayed work should get corrupted while it is either being queued or running or being cancelled. Let's use polling flag and devfreq lock to synchronize the queueing the timer instance twice and work data being corrupted. [1] ... .. <idle>-0 [003] 9436.209662: timer_cancel timer=0xffffff80444f0428 <idle>-0 [003] 9436.209664: timer_expire_entry timer=0xffffff80444f0428 now=0x10022da1c function=__typeid__ZTSFvP10timer_listE_global_addr baseclk=0x10022da1c <idle>-0 [003] 9436.209718: timer_expire_exit timer=0xffffff80444f0428 kworker/u16:6-14217 [003] 9436.209863: timer_start timer=0xffffff80444f0428 function=__typeid__ZTSFvP10timer_listE_global_addr expires=0x10022da2b now=0x10022da1c flags=182452227 vendor.xxxyyy.ha-1593 [004] 9436.209888: timer_cancel timer=0xffffff80444f0428 vendor.xxxyyy.ha-1593 [004] 9436.216390: timer_init timer=0xffffff80444f0428 vendor.xxxyyy.ha-1593 [004] 9436.216392: timer_start timer=0xffffff80444f0428 function=__typeid__ZTSFvP10timer_listE_global_addr expires=0x10022da2c now=0x10022da1d flags=186646532 vendor.xxxyyy.ha-1593 [005] 9436.220992: timer_cancel timer=0xffffff80444f0428 xxxyyyTraceManag-7795 [004] 9436.261641: timer_cancel timer=0xffffff80444f0428 [2] 9436.261653][ C4] Unable to handle kernel paging request at virtual address dead00000000012a [ 9436.261664][ C4] Mem abort info: [ 9436.261666][ C4] ESR = 0x96000044 [ 9436.261669][ C4] EC = 0x25: DABT (current EL), IL = 32 bits [ 9436.261671][ C4] SET = 0, FnV = 0 [ 9436.261673][ C4] EA = 0, S1PTW = 0 [ 9436.261675][ C4] Data abort info: [ 9436.261677][ C4] ISV = 0, ISS = 0x00000044 [ 9436.261680][ C4] CM = 0, WnR = 1 [ 9436.261682][ C4] [dead00000000012a] address between user and kernel address ranges [ 9436.261685][ C4] Internal error: Oops: 96000044 [#1] PREEMPT SMP [ 9436.261701][ C4] Skip md ftrace buffer dump for: 0x3a982d0 ... [ 9436.262138][ C4] CPU: 4 PID: 7795 Comm: TraceManag Tainted: G S W O 5.10.149-android12-9-o-g17f915d29d0c #1 [ 9436.262141][ C4] Hardware name: Qualcomm Technologies, Inc. (DT) [ 9436.262144][ C4] pstate: 22400085 (nzCv daIf +PAN -UAO +TCO BTYPE=--) [ 9436.262161][ C4] pc : expire_timers+0x9c/0x438 [ 9436.262164][ C4] lr : expire_timers+0x2a4/0x438 [ 9436.262168][ C4] sp : ffffffc010023dd0 [ 9436.262171][ C4] x29: ffffffc010023df0 x28: ffffffd0636fdc18 [ 9436.262178][ C4] x27: ffffffd063569dd0 x26: ffffffd063536008 [ 9436.262182][ C4] x25: 0000000000000001 x24: ffffff88f7c69280 [ 9436.262185][ C4] x23: 00000000000000e0 x22: dead000000000122 [ 9436.262188][ C4] x21: 000000010022da29 x20: ffffff8af72b4e80 [ 9436.262191][ C4] x19: ffffffc010023e50 x18: ffffffc010025038 [ 9436.262195][ C4] x17: 0000000000000240 x16: 0000000000000201 [ 9436.262199][ C4] x15: ffffffffffffffff x14: ffffff889f3c3100 [ 9436.262203][ C4] x13: ffffff889f3c3100 x12: 00000000049f56b8 [ 9436.262207][ C4] x11: 00000000049f56b8 x10: 00000000ffffffff [ 9436.262212][ C4] x9 : ffffffc010023e50 x8 : dead000000000122 [ 9436.262216][ C4] x7 : ffffffffffffffff x6 : ffffffc0100239d8 [ 9436.262220][ C4] x5 : 0000000000000000 x4 : 0000000000000101 [ 9436.262223][ C4] x3 : 0000000000000080 x2 : ffffff8 ---truncated---

pypdf is an open source, pure-python PDF library. In affected versions an attacker may craft a PDF which leads to an infinite loop if `__parse_content_stream` is executed. That is, for example, the case if the user extracted text from such a PDF. This issue was introduced in pull request #969 and resolved in pull request #1828. Users are advised to upgrade. Users unable to upgrade may modify the line `while peek not in (b"\r", b"\n")` in `pypdf/generic/_data_structures.py` to `while peek not in (b"\r", b"\n", b"")`.

The sdhci_sdma_transfer_multi_blocks function in hw/sd/sdhci.c in QEMU (aka Quick Emulator) allows local OS guest privileged users to cause a denial of service (infinite loop and QEMU process crash) via vectors involving the transfer mode register during multi block transfer.

The xhci_kick_epctx function in hw/usb/hcd-xhci.c in QEMU (aka Quick Emulator) allows local guest OS privileged users to cause a denial of service (infinite loop and QEMU process crash) via vectors related to control transfer descriptor sequence.

In the Linux kernel, the following vulnerability has been resolved: PCI: pciehp: Fix infinite loop in IRQ handler upon power fault The Power Fault Detected bit in the Slot Status register differs from all other hotplug events in that it is sticky: It can only be cleared after turning off slot power. Per PCIe r5.0, sec. 6.7.1.8: If a power controller detects a main power fault on the hot-plug slot, it must automatically set its internal main power fault latch [...]. The main power fault latch is cleared when software turns off power to the hot-plug slot. The stickiness used to cause interrupt storms and infinite loops which were fixed in 2009 by commits 5651c48cfafe ("PCI pciehp: fix power fault interrupt storm problem") and 99f0169c17f3 ("PCI: pciehp: enable software notification on empty slots"). Unfortunately in 2020 the infinite loop issue was inadvertently reintroduced by commit 8edf5332c393 ("PCI: pciehp: Fix MSI interrupt race"): The hardirq handler pciehp_isr() clears the PFD bit until pciehp's power_fault_detected flag is set. That happens in the IRQ thread pciehp_ist(), which never learns of the event because the hardirq handler is stuck in an infinite loop. Fix by setting the power_fault_detected flag already in the hardirq handler.

In multiple locations, there is a possible way to trigger a persistent reboot loop due to improper input validation. This could lead to local denial of service with User execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-13Android ID: A-246749936

In multiple locations, there is a possible way to trigger a persistent reboot loop due to improper input validation. This could lead to local denial of service with User execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-13Android ID: A-246749764

In multiple locations, there is a possible way to trigger a persistent reboot loop due to improper input validation. This could lead to local denial of service with User execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-13Android ID: A-246750467

ts-asn1-der is a collection of utility classes to encode ASN.1 data following DER rule. Incorrect number DER encoding can lead to denial on service for absolute values in the range 2**31 -- 2**32 - 1. The arithmetic in the numBitLen didn't take into account that values in this range could result in a negative result upon applying the >> operator, leading to an infinite loop. The issue is patched in version 1.0.4. If upgrading is not an option, the issue can be mitigated by validating inputs to Asn1Integer to ensure that they are not smaller than -2**31 + 1 and no larger than 2**31 - 1.