Account users in Apache CloudStack by default are allowed to register templates to be downloaded directly to the primary storage for deploying instances. Due to missing validation checks for KVM-compatible templates in CloudStack 4.0.0 through 4.18.2.4 and 4.19.0.0 through 4.19.1.2, an attacker that can register templates, can use them to deploy malicious instances on KVM-based environments and exploit this to gain access to the host filesystems that could result in the compromise of resource integrity and confidentiality, data loss, denial of service, and availability of KVM-based infrastructure managed by CloudStack. Users are recommended to upgrade to Apache CloudStack 4.18.2.5 or 4.19.1.3, or later, which addresses this issue. Additionally, all user-registered KVM-compatible templates can be scanned and checked that they are flat files that should not be using any additional or unnecessary features. For example, operators can run the following command on their file-based primary storage(s) and inspect the output. An empty output for the disk being validated means it has no references to the host filesystems; on the other hand, if the output for the disk being validated is not empty, it might indicate a compromised disk. However, bear in mind that (i) volumes created from templates will have references for the templates at first and (ii) volumes can be consolidated while migrating, losing their references to the templates. Therefore, the command execution for the primary storages can show both false positives and false negatives. for file in $(find /path/to/storage/ -type f -regex [a-f0-9\-]*.*); do echo "Retrieving file [$file] info. If the output is not empty, that might indicate a compromised disk; check it carefully."; qemu-img info -U $file | grep file: ; printf "\n\n"; done For checking the whole template/volume features of each disk, operators can run the following command: for file in $(find /path/to/storage/ -type f -regex [a-f0-9\-]*.*); do echo "Retrieving file [$file] info."; qemu-img info -U $file; printf "\n\n"; done

Account users in Apache CloudStack by default are allowed to upload and register templates for deploying instances and volumes for attaching them as data disks to their existing instances. Due to missing validation checks for KVM-compatible templates or volumes in CloudStack 4.0.0 through 4.18.2.3 and 4.19.0.0 through 4.19.1.1, an attacker that can upload or register templates and volumes, can use them to deploy malicious instances or attach uploaded volumes to their existing instances on KVM-based environments and exploit this to gain access to the host filesystems that could result in the compromise of resource integrity and confidentiality, data loss, denial of service, and availability of KVM-based infrastructure managed by CloudStack. Users are recommended to upgrade to Apache CloudStack 4.18.2.4 or 4.19.1.2, or later, which addresses this issue. Additionally, all user-uploaded or registered KVM-compatible templates and volumes can be scanned and checked that they are flat files that should not be using any additional or unnecessary features. For example, operators can run this on their secondary storage(s) and inspect output. An empty output for the disk being validated means it has no references to the host filesystems; on the other hand, if the output for the disk being validated is not empty, it might indicate a compromised disk. for file in $(find /path/to/storage/ -type f -regex [a-f0-9\-]*.*); do echo "Retrieving file [$file] info. If the output is not empty, that might indicate a compromised disk; check it carefully."; qemu-img info -U $file | grep file: ; printf "\n\n"; done The command can also be run for the file-based primary storages; however, bear in mind that (i) volumes created from templates will have references for the templates at first and (ii) volumes can be consolidated while migrating, losing their references to the templates. Therefore, the command execution for the primary storages can show both false positives and false negatives. For checking the whole template/volume features of each disk, operators can run the following command: for file in $(find /path/to/storage/ -type f -regex [a-f0-9\-]*.*); do echo "Retrieving file [$file] info."; qemu-img info -U $file; printf "\n\n"; done

The Pulsar Functions Worker includes a capability that permits authenticated users to create functions where the function's implementation is referenced by a URL. The supported URL schemes include "file", "http", and "https". When a function is created using this method, the Functions Worker will retrieve the implementation from the URL provided by the user. However, this feature introduces a vulnerability that can be exploited by an attacker to gain unauthorized access to any file that the Pulsar Functions Worker process has permissions to read. This includes reading the process environment which potentially includes sensitive information, such as secrets. Furthermore, an attacker could leverage this vulnerability to use the Pulsar Functions Worker as a proxy to access the content of remote HTTP and HTTPS endpoint URLs. This could also be used to carry out denial of service attacks. This vulnerability also applies to the Pulsar Broker when it is configured with "functionsWorkerEnabled=true". This issue affects Apache Pulsar versions from 2.4.0 to 2.10.5, from 2.11.0 to 2.11.3, from 3.0.0 to 3.0.2, from 3.1.0 to 3.1.2, and 3.2.0. 2.10 Pulsar Function Worker users should upgrade to at least 2.10.6. 2.11 Pulsar Function Worker users should upgrade to at least 2.11.4. 3.0 Pulsar Function Worker users should upgrade to at least 3.0.3. 3.1 Pulsar Function Worker users should upgrade to at least 3.1.3. 3.2 Pulsar Function Worker users should upgrade to at least 3.2.1. Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions. The updated versions of Pulsar Functions Worker will, by default, impose restrictions on the creation of functions using URLs. For users who rely on this functionality, the Function Worker configuration provides two configuration keys: "additionalEnabledConnectorUrlPatterns" and "additionalEnabledFunctionsUrlPatterns". These keys allow users to specify a set of URL patterns that are permitted, enabling the creation of functions using URLs that match the defined patterns. This approach ensures that the feature remains available to those who require it, while limiting the potential for unauthorized access and exploitation.

Improper input validation in the Pulsar Function Worker allows a malicious authenticated user to execute arbitrary Java code on the Pulsar Function worker, outside of the sandboxes designated for running user-provided functions. This vulnerability also applies to the Pulsar Broker when it is configured with "functionsWorkerEnabled=true". This issue affects Apache Pulsar versions from 2.4.0 to 2.10.5, from 2.11.0 to 2.11.3, from 3.0.0 to 3.0.2, from 3.1.0 to 3.1.2, and 3.2.0. 2.10 Pulsar Function Worker users should upgrade to at least 2.10.6. 2.11 Pulsar Function Worker users should upgrade to at least 2.11.4. 3.0 Pulsar Function Worker users should upgrade to at least 3.0.3. 3.1 Pulsar Function Worker users should upgrade to at least 3.1.3. 3.2 Pulsar Function Worker users should upgrade to at least 3.2.1. Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions.

Malicious code execution via path traversal in Apache Software Foundation Apache Sling Servlets Resolver.This issue affects all version of Apache Sling Servlets Resolver before 2.11.0. However, whether a system is vulnerable to this attack depends on the exact configuration of the system. If the system is vulnerable, a user with write access to the repository might be able to trick the Sling Servlet Resolver to load a previously uploaded script.  Users are recommended to upgrade to version 2.11.0, which fixes this issue. It is recommended to upgrade, regardless of whether your system configuration currently allows this attack or not.

The Lite UI of Apache ShardingSphere ElasticJob-UI allows an attacker to perform RCE by constructing a special JDBC URL of H2 database. This issue affects Apache ShardingSphere ElasticJob-UI version 3.0.1 and prior versions. This vulnerability has been fixed in ElasticJob-UI 3.0.2. The premise of this attack is that the attacker has obtained the account and password. Otherwise, the attacker cannot perform this attack.

Improper Validation of Certificate with Host Mismatch vulnerability in Apache Thrift. This issue affects Apache Thrift: before 0.23.0. Users are recommended to upgrade to version 0.23.0, which fixes the issue.

Improper Validation of Certificate with Host Mismatch vulnerability in Apache Thrift. This issue affects Apache Thrift: before 0.23.0. Users are recommended to upgrade to version 0.23.0, which fixes the issue.

The fix for CVE-2025-68161 https://logging.apache.org/security.html#CVE-2025-68161 was incomplete: it addressed hostname verification only when enabled via the log4j2.sslVerifyHostName https://logging.apache.org/log4j/2.x/manual/systemproperties.html#log4j2.sslVerifyHostName system property, but not when configured through the verifyHostName https://logging.apache.org/log4j/2.x/manual/appenders/network.html#SslConfiguration-attr-verifyHostName attribute of the <Ssl> element. Although the verifyHostName configuration attribute was introduced in Log4j Core 2.12.0, it was silently ignored in all versions through 2.25.3, leaving TLS connections vulnerable to interception regardless of the configured value. A network-based attacker may be able to perform a man-in-the-middle attack when all of the following conditions are met: * An SMTP, Socket, or Syslog appender is in use. * TLS is configured via a nested <Ssl> element. * The attacker can present a certificate issued by a CA trusted by the appender's configured trust store, or by the default Java trust store if none is configured. This issue does not affect users of the HTTP appender, which uses a separate verifyHostname https://logging.apache.org/log4j/2.x/manual/appenders/network.html#HttpAppender-attr-verifyHostName attribute that was not subject to this bug and verifies host names by default. Users are advised to upgrade to Apache Log4j Core 2.25.4, which corrects this issue.

The Uniffle HTTP client is configured to trust all SSL certificates and disables hostname verification by default. This insecure configuration exposes all REST API communication between the Uniffle CLI/client and the Uniffle Coordinator service to potential Man-in-the-Middle (MITM) attacks. This issue affects all versions from before 0.10.0. Users are recommended to upgrade to version 0.10.0, which fixes the issue.

The Socket Appender in Apache Log4j Core versions 2.0-beta9 through 2.25.2 does not perform TLS hostname verification of the peer certificate, even when the verifyHostName https://logging.apache.org/log4j/2.x/manual/appenders/network.html#SslConfiguration-attr-verifyHostName configuration attribute or the log4j2.sslVerifyHostName https://logging.apache.org/log4j/2.x/manual/systemproperties.html#log4j2.sslVerifyHostName system property is set to true. This issue may allow a man-in-the-middle attacker to intercept or redirect log traffic under the following conditions: * The attacker is able to intercept or redirect network traffic between the client and the log receiver. * The attacker can present a server certificate issued by a certification authority trusted by the Socket Appender’s configured trust store (or by the default Java trust store if no custom trust store is configured). Users are advised to upgrade to Apache Log4j Core version 2.25.3, which addresses this issue. As an alternative mitigation, the Socket Appender may be configured to use a private or restricted trust root to limit the set of trusted certificates.

Hostname verification bypass issue in Apache Ranger NiFiRegistryClient/NiFiClient is reported in Apache Ranger versions <= 2.7.0. Users are recommended to upgrade to version 2.8.0, which fixes this issue.

The Serf RA layer in Apache Subversion 1.4.0 through 1.7.x before 1.7.18 and 1.8.x before 1.8.10 does not properly handle wildcards in the Common Name (CN) or subjectAltName field of the X.509 certificate, which allows man-in-the-middle attackers to spoof servers via a crafted certificate.