Tenda M3 V1.0.0.12(4856) was discovered to contain a stack overflow via the function upgrade.

Tenda AX1803 v1.0.0.1 contains a stack overflow via the iptv.stb.mode parameter in the function formSetIptv.

Tenda AX1803 v1.0.0.1 contains a stack overflow via the iptv.stb.port parameter in the function getIptvInfo.

Tenda i29 v1.0 V1.0.0.5 was discovered to contain a buffer overflow via the time parameter in the sysTimeInfoSet function.

Stack Overflow vulnerability in the validate() function in Mathtex v.1.05 and before allows a remote attacker to execute arbitrary code via crafted string in the application URL.

Tenda AX1803 v1.0.0.1 contains a stack overflow via the iptv.city.vlan parameter in the function getIptvInfo.

Memory safety bugs present in Firefox 117, Firefox ESR 115.2, and Thunderbird 115.2. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability affects Firefox < 118, Firefox ESR < 115.3, and Thunderbird < 115.3.

Tenda i29 v1.0 V1.0.0.5 was discovered to contain a buffer overflow via the rebootTime parameter in the sysScheduleRebootSet function.

Tenda AX1803 v1.0.0.1 contains a stack overflow via the adv.iptv.stbpvid parameter in the function getIptvInfo.

Tenda M3 V1.0.0.12(4856) was discovered to contain a stack overflow via the function R7WebsSecurityHandler.

Tenda W30E V16.01.0.12(4843) was discovered to contain a stack overflow via the function formResetMeshNode.

Tenda W30E V16.01.0.12(4843) was discovered to contain a command injection vulnerability via the function setFixTools.

Tenda AX9 V22.03.01.46 has been found to contain a stack overflow vulnerability in the 'list' parameter at /goform/SetVirtualServerCfg.

Possible variant of CVE-2021-3434 in function le_ecred_reconf_req.

Tenda AX9 V22.03.01.46 has been found to contain a stack overflow vulnerability in the 'list' parameter at /goform/SetStaticRouteCfg.

A weakness has been identified in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20260205. Affected by this issue is the function Local_Backup_Info of the file /cgi-bin/local_backup_mgr.cgi. This manipulation of the argument f_idx causes stack-based buffer overflow. The attack can be initiated remotely. The exploit has been made available to the public and could be used for attacks.

Memory Corruption in SIM management while USIMPhase2init

Tenda AX9 V22.03.01.46 has been found to contain a stack overflow vulnerability in the 'deviceList' parameter at /goform/setMacFilterCfg.

Tenda W30E V16.01.0.12(4843) was discovered to contain a stack overflow via the function formAdvancedSetListSet.

The JavaScript garbage collector could mis-color cross-compartment objects if OOM conditions were detected at the right point between two passes. This could have led to memory corruption. This vulnerability affects Firefox < 130, Firefox ESR < 128.2, Firefox ESR < 115.15, Thunderbird < 128.2, and Thunderbird < 115.15.

A stack-based buffer overflow vulnerability in /bin/webs binary in Edimax BR6478AC V2 firmware veraion v1.23 allows attackers to overwrite other values located on the stack due to an incorrect use of the strcpy() function.

Gigabyte Control Center developed by GIGABYTE has an Arbitrary File Write vulnerability. When the pairing feature is enabled, unauthenticated remote attackers can write arbitrary files to any location on the underlying operating system, leading to arbitrary code execution or privilege escalation.

A stack-based buffer overflow was discovered on TRENDnet TV-IP1314PI 5.5.3 200714 devices, leading to arbitrary command execution. This occurs because of lack of length validation during an sscanf of a user-entered scale field in the RTSP playback function of davinci.

vmm-sys-util is a collection of modules that provides helpers and utilities used by multiple rust-vmm components. Starting in version 0.5.0 and prior to version 0.12.0, an issue in the `FamStructWrapper::deserialize` implementation provided by the crate for `vmm_sys_util::fam::FamStructWrapper` can lead to out of bounds memory accesses. The deserialization does not check that the length stored in the header matches the flexible array length. Mismatch in the lengths might allow out of bounds memory access through Rust-safe methods. The issue was corrected in version 0.12.0 by inserting a check that verifies the lengths of compared flexible arrays are equal for any deserialized header and aborting deserialization otherwise. Moreover, the API was changed so that header length can only be modified through Rust-unsafe code. This ensures that users cannot trigger out-of-bounds memory access from Rust-safe code.

A vulnerability was detected in D-Link DIR-816 1.10CNB05. Affected by this vulnerability is an unknown functionality of the file /goform/form2Wl5BasicSetup.cgi of the component goahead. Performing a manipulation of the argument pskValue results in stack-based buffer overflow. The attack is possible to be carried out remotely. The exploit is now public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A remote code execution vulnerability due to incomplete check for 'xheader_decode_path_record' function's parameter length value in the ark library. Remote attackers can induce exploit malicious code using this function.

Tenda AX3 V16.03.12.11 was discovered to contain a stack overflow via the function set_device_name.

Tenda W30E V16.01.0.12(4843) was discovered to contain a stack overflow via the function UploadCfg.

In Mesa before 25.3.6 and 26 before 26.0.1, out-of-bounds memory access can occur in WebGPU because the amount of to-be-allocated data depends on an untrusted party, and is then used for alloca.

Tenda W30E V16.01.0.12(4843) was discovered to contain a stack overflow via the function formUpgradeMeshOnline.

Tenda W30E V16.01.0.12(4843) was discovered to contain a command injection vulnerability via the function setUmountUSBPartition.

TOTOLink A7000R V9.1.0u.6115_B20201022 has a stack overflow vulnerability via setOpModeCfg.

Multiple command injections and stack-based buffer overflows vulnerabilities in the SubNet_handler_func function of spx_restservice allow an attacker to execute arbitrary code with the same privileges as the server user (root). This issue affects: Lanner Inc IAC-AST2500A standard firmware version 1.10.0.

Tenda AX12 V22.03.01.46 was discovered to contain a stack overflow via the list parameter at /goform/SetVirtualServerCfg.

A vulnerability has been found in TOTOLINK EX1200L 9.3.5u.6146_B20201023 and classified as critical. Affected by this vulnerability is the function setLanguageCfg of the file /www/cgi-bin/cstecgi.cgi. The manipulation of the argument langType leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Buffer Overflow vulnerability in Tenda AX1803 v.1.0.0.1 allows a remote attacker to execute arbitrary code via the wpapsk_crypto parameter in the function fromSetWirelessRepeat.

A flaw has been found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20260205. This issue affects the function UPnP_AV_Server_Path_Setting of the file /cgi-bin/app_mgr.cgi. Executing a manipulation can lead to stack-based buffer overflow. The attack may be launched remotely. The exploit has been published and may be used.

Vulnerability in Tenda AC8v4 .V16.03.34.09 due to sscanf and the last digit of s8 being overwritten with \x0. After executing set_client_qos, control over the gp register can be obtained.

In Netgear Orbi RBR750 firmware before V7.2.6.21, there is a stack-based buffer overflow in /usr/sbin/httpd.

The vulnerability allows an unauthenticated remote attacker to perform a Denial-of-Service (DoS) attack or, possibly, obtain Remote Code Execution (RCE) via a crafted network request.

Cap'n Proto is a data interchange format and capability-based RPC system. In versions 1.0 and 1.0.1, when using the KJ HTTP library with WebSocket compression enabled, a buffer underrun can be caused by a remote peer. The underrun always writes a constant value that is not attacker-controlled, likely resulting in a crash, enabling a remote denial-of-service attack. Most Cap'n Proto and KJ users are unlikely to have this functionality enabled and so unlikely to be affected. Maintainers suspect only the Cloudflare Workers Runtime is affected. If KJ HTTP is used with WebSocket compression enabled, a malicious peer may be able to cause a buffer underrun on a heap-allocated buffer. KJ HTTP is an optional library bundled with Cap'n Proto, but is not directly used by Cap'n Proto. WebSocket compression is disabled by default. It must be enabled via a setting passed to the KJ HTTP library via `HttpClientSettings` or `HttpServerSettings`. The bytes written out-of-bounds are always a specific constant 4-byte string `{ 0x00, 0x00, 0xFF, 0xFF }`. Because this string is not controlled by the attacker, maintainers believe it is unlikely that remote code execution is possible. However, it cannot be ruled out. This functionality first appeared in Cap'n Proto 1.0. Previous versions are not affected. This issue is fixed in Cap'n Proto 1.0.1.1.

A vulnerability was found in Tenda O6 1.0.0.7(2054). It has been declared as critical. This vulnerability affects the function frommacFilterModify of the file /goform/operateMacFilter. The manipulation of the argument mac leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was detected in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20260205. This vulnerability affects the function cgi_myfavorite_del_user/cgi_myfavorite_verify of the file /cgi-bin/gui_mgr.cgi. Performing a manipulation results in stack-based buffer overflow. The attack may be initiated remotely. The exploit is now public and may be used.

Stack Overflow vulnerability in Tenda AX1803 v.1.0.0.1 allows a remote attacker to execute arbitrary code via the ssid parameter in the function form_fast_setting_wifi_set.

A security vulnerability has been detected in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20260205. This affects the function Downloads_Schedule_Info of the file /cgi-bin/download_mgr.cgi. Such manipulation leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed publicly and may be used.

In all versions of ClickHouse before 19.14, an OOB read, OOB write and integer underflow in decompression algorithms can be used to achieve RCE or DoS via native protocol.

A vulnerability has been identified in SCALANCE X200-4P IRT (All versions < 5.5.1), SCALANCE X201-3P IRT (All versions < 5.5.1), SCALANCE X201-3P IRT PRO (All versions < 5.5.1), SCALANCE X202-2 IRT (All versions < 5.5.1), SCALANCE X202-2P IRT (incl. SIPLUS NET variant) (All versions < 5.5.1), SCALANCE X202-2P IRT PRO (All versions < 5.5.1), SCALANCE X204 IRT (All versions < 5.5.1), SCALANCE X204 IRT PRO (All versions < 5.5.1), SCALANCE X204-2 (incl. SIPLUS NET variant) (All versions < V5.2.5), SCALANCE X204-2FM (All versions < V5.2.5), SCALANCE X204-2LD (incl. SIPLUS NET variant) (All versions < V5.2.5), SCALANCE X204-2LD TS (All versions < V5.2.5), SCALANCE X204-2TS (All versions < V5.2.5), SCALANCE X206-1 (All versions < V5.2.5), SCALANCE X206-1LD (All versions < V5.2.5), SCALANCE X208 (incl. SIPLUS NET variant) (All versions < V5.2.5), SCALANCE X208PRO (All versions < V5.2.5), SCALANCE X212-2 (incl. SIPLUS NET variant) (All versions < V5.2.5), SCALANCE X212-2LD (All versions < V5.2.5), SCALANCE X216 (All versions < V5.2.5), SCALANCE X224 (All versions < V5.2.5), SCALANCE XF201-3P IRT (All versions < 5.5.1), SCALANCE XF202-2P IRT (All versions < 5.5.1), SCALANCE XF204 (All versions < V5.2.5), SCALANCE XF204 IRT (All versions < 5.5.1), SCALANCE XF204-2 (incl. SIPLUS NET variant) (All versions < V5.2.5), SCALANCE XF204-2BA IRT (All versions < 5.5.1), SCALANCE XF206-1 (All versions < V5.2.5), SCALANCE XF208 (All versions < V5.2.5). Incorrect processing of POST requests in the webserver may result in write out of bounds in heap. An attacker might leverage this to cause denial-of-service on the device and potentially remotely execute code.

Azure RTOS USBX is a USB host, device, and on-the-go (OTG) embedded stack, that is fully integrated with Azure RTOS ThreadX. An attacker can cause remote code execution due to memory buffer and pointer vulnerabilities in Azure RTOS USBX. The affected components include functions/processes in pictbridge and host class, related to PIMA, storage, CDC ACM, ECM, audio, hub in RTOS v6.2.1 and below. The fixes have been included in USBX release 6.3.0. Users are advised to upgrade. There are no known workarounds for this vulnerability.

Azure RTOS NetX Duo is a TCP/IP network stack designed specifically for deeply embedded real-time and IoT applications. An attacker can cause remote code execution due to memory overflow vulnerabilities in Azure RTOS NETX Duo. The affected components include processes/functions related to icmp, tcp, snmp, dhcp, nat and ftp in RTOS v6.2.1 and below. The fixes have been included in NetX Duo release 6.3.0. Users are advised to upgrade. There are no known workarounds for this vulnerability.

In gatts_process_primary_service_req of gatt_sr.cc, there is a possible out of bounds write due to a heap buffer overflow. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation.