OS Command Injection vulnerability in NEC Platforms, Ltd. Aterm Series allows a attacker to execute arbitrary OS commands via network.

A vulnerability was found in Sangfor Operation and Maintenance Management System up to 3.0.8. This issue affects some unknown processing of the file /isomp-protocol/protocol/getHis of the component HTTP POST Request Handler. The manipulation of the argument sessionPath results in os command injection. The attack may be launched remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

cPanel and WHM versions after 11.40 contain an authentication bypass vulnerability in the login flow that allows unauthenticated remote attackers to gain unauthorized access to the control panel.

Nginx UI is a web user interface for the Nginx web server. From version 2.0.0 to before version 2.3.8, an unauthenticated network attacker can claim the initial administrator account on a fresh nginx-ui instance during the first-run setup window. The public /api/install endpoint is reachable without authentication, and the request-encryption flow only protects payload confidentiality in transit; it does not authenticate who is allowed to perform installation. A remote attacker who reaches the service before the legitimate operator can set the admin email, username, and password, causing permanent initial-instance takeover. This issue has been patched in version 2.3.8.

A vulnerability was determined in D-Link DIR-820LW 2.03. Affected is the function ssdpcgi_main of the component SSDP. Executing a manipulation can lead to os command injection. The attack may be launched remotely. The exploit has been publicly disclosed and may be utilized.

A vulnerability was found in Totolink A7100RU 7.4cu.2313_b20191024. This impacts the function UploadFirmwareFile of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Performing a manipulation of the argument FileName results in os command injection. The attack may be initiated remotely. The exploit has been made public and could be used.

Azure CLI is the command-line interface for Microsoft Azure. In versions previous to 2.40.0, Azure CLI contains a vulnerability for potential code injection. Critical scenarios are where a hosting machine runs an Azure CLI command where parameter values have been provided by an external source. The vulnerability is only applicable when the Azure CLI command is run on a Windows machine and with any version of PowerShell and when the parameter value contains the `&` or `|` symbols. If any of these prerequisites are not met, this vulnerability is not applicable. Users should upgrade to version 2.40.0 or greater to receive a a mitigation for the vulnerability.

A weakness has been identified in Topsec TopACM 3.0. Affected by this vulnerability is an unknown functionality of the file /view/systemConfig/management/nmc_sync.php of the component HTTP Request Handler. Executing a manipulation of the argument template_path can lead to os command injection. The attack can be executed remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

The web configuration interface of the TP-Link M7350 V3 with firmware version 190531 is affected by a pre-authentication command injection vulnerability.

A vulnerability has been found in Sangfor Operation and Maintenance Management System up to 3.0.8. This vulnerability affects the function uploadCN of the file VersionController.java. The manipulation of the argument filename leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Missing Authorization vulnerability in ThemeHunk Advance WordPress Search Plugin.This issue affects Advance WordPress Search Plugin: from n/a through 1.2.1.

A vulnerability in SenseLive X3050’s embedded management service allows full administrative control to be established without any form of authentication or authorization on the SenseLive config application. The service accepts management connections from any reachable host, enabling unrestricted modification of critical configuration parameters, operational modes, and device state through a vendor-supplied or compatible client.

IBM Spectrum Protect Plus 10.1.0 and 10.1.5 could allow a remote attacker to execute arbitrary code on the system. By using a specially crafted HTTP command, an attacker could exploit this vulnerability to execute arbitrary command on the system. IBM X-Force ID: 175091.

In D-Link DIR-816 A2_v1.10CNB04, DIR-878 DIR_878_FW1.30B08.img a command injection vulnerability occurs in /goform/Diagnosis, after the condition is met, setnum will be spliced into v10 by snprintf, and the system will be executed, resulting in a command injection vulnerability

PraisonAI is a multi-agent teams system. In versions below 4.5.139 of PraisonAI and 1.5.140 of praisonaiagents, the workflow engine is vulnerable to arbitrary command and code execution through untrusted YAML files. When praisonai workflow run <file.yaml> loads a YAML file with type: job, the JobWorkflowExecutor in job_workflow.py processes steps that support run: (shell commands via subprocess.run()), script: (inline Python via exec()), and python: (arbitrary Python script execution)—all without any validation, sandboxing, or user confirmation. The affected code paths include action_run() in workflow.py and _exec_shell(), _exec_inline_python(), and _exec_python_script() in job_workflow.py. An attacker who can supply or influence a workflow YAML file (particularly in CI pipelines, shared repositories, or multi-tenant deployment environments) can achieve full arbitrary command execution on the host system, compromising the machine and any accessible data or credentials. This issue has been fixed in versions 4.5.139 of PraisonAI and 1.5.140 of praisonaiagents.

goshs is a SimpleHTTPServer written in Go. Prior to 2.0.0-beta.6, goshs contains an SFTP authentication bypass when the documented empty-username basic-auth syntax is used. If the server is started with -b ':pass' together with -sftp, goshs accepts that configuration but does not install any SFTP password handler. As a result, an unauthenticated network attacker can connect to the SFTP service and access files without a password. This vulnerability is fixed in 2.0.0-beta.6.

A security vulnerability has been detected in Totolink A7100RU 7.4cu.2313_b20191024. Affected by this vulnerability is the function setTtyServiceCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Such manipulation of the argument ttyEnable leads to os command injection. The attack can be launched remotely. The exploit has been disclosed publicly and may be used.

marimo is a reactive Python notebook. Prior to 0.23.0, Marimo has a Pre-Auth RCE vulnerability. The terminal WebSocket endpoint /terminal/ws lacks authentication validation, allowing an unauthenticated attacker to obtain a full PTY shell and execute arbitrary system commands. Unlike other WebSocket endpoints (e.g., /ws) that correctly call validate_auth() for authentication, the /terminal/ws endpoint only checks the running mode and platform support before accepting connections, completely skipping authentication verification. This vulnerability is fixed in 0.23.0.

D-Link GO-RT-AC750 GORTAC750_revA_v101b03 and GO-RT-AC750_revB_FWv200b02 is vulnerable to Command Injection via /cgibin, hnap_main,

A security flaw has been discovered in Totolink A7100RU 7.4cu.2313_b20191024. The affected element is the function setWizardCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Performing a manipulation of the argument wizard results in os command injection. The attack may be initiated remotely. The exploit has been released to the public and may be used for attacks.

D-Link Go-RT-AC750 GORTAC750_revA_v101b03 and GO-RT-AC750_revB_FWv200b02 are vulnerable to Command Injection via cgibin, ssdpcgi_main.

A improper neutralization of special elements used in an os command ('os command injection') vulnerability in Fortinet FortiSandbox 4.4.0 through 4.4.8 may allow attacker to execute unauthorized code or commands via <insert attack vector here>

There is a command injection vulnerability that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba Networks AP management protocol) UDP port (8211). Successful exploitation of this vulnerability results in the ability to execute arbitrary code as a privileged user on the underlying operating system.

TOTOLink A700RU V7.4cu.2313_B20191024 was discovered to contain a command injection vulnerability via the lang parameter in the function cstesystem. This vulnerability allows attackers to execute arbitrary commands via a crafted payload.

A vulnerability was found in Totolink N300RH 6..1c.1353_B20190305. The affected element is the function setWiFiWpsConfig of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Performing a manipulation results in os command injection. The attack can be initiated remotely. The exploit has been made public and could be used.

PraisonAI is a multi-agent teams system. From version 4.5.15 to before version 4.5.69, the --mcp CLI argument is passed directly to shlex.split() and forwarded through the call chain to anyio.open_process() with no validation, allowlist check, or sanitization at any hop, allowing arbitrary OS command execution as the process user. This issue has been patched in version 4.5.69.

All FLIR AX8 thermal sensor cameras version up to and including 1.46.16 are vulnerable to Remote Command Injection. This can be exploited to inject and execute arbitrary shell commands as the root user through the id HTTP POST parameter in the res.php endpoint. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with the root privileges. NOTE: The vendor has stated that with the introduction of firmware version 1.49.16 (Jan 2023) the FLIR AX8 should no longer be affected by the vulnerability reported. Latest firmware version (as of Oct 2025, was released Jun 2024) is 1.55.16.

A flaw has been found in D-Link DIR-868L 110b03. This affects the function sub_1BF84 of the component SSDP Service. This manipulation of the argument ST causes os command injection. It is possible to initiate the attack remotely. The exploit has been published and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability, which was classified as critical, was found in Tenda AC7 1200M 15.03.06.44. Affected is the function TendaTelnet of the file /goform/telnet. The manipulation of the argument lan_ip leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

This vulnerability allows remote attackers to bypass authentication on affected installations of Ivanti Avalanche. Authentication is not required to exploit this vulnerability. The specific flaw exists within the SetSettings class. The issue results from the lack of authentication prior to allowing access to functionality. An attacker can leverage this vulnerability to bypass authentication on the system. Was ZDI-CAN-15919.

PraisonAI is a multi-agent teams system. Prior to version 1.5.90, run_python() in praisonai constructs a shell command string by interpolating user-controlled code into python3 -c "<code>" and passing it to subprocess.run(..., shell=True). The escaping logic only handles \ and ", leaving $() and backtick substitutions unescaped, allowing arbitrary OS command execution before Python is invoked. This issue has been patched in version 1.5.90.

OneUptime is an open-source monitoring and observability platform. Prior to version 10.0.42, the Worker service's ManualAPI exposes workflow execution endpoints (GET /workflow/manual/run/:workflowId and POST /workflow/manual/run/:workflowId) without any authentication middleware. An attacker who can obtain or guess a workflow ID can trigger arbitrary workflow execution with attacker-controlled input data, enabling JavaScript code execution, notification abuse, and data manipulation. This issue has been patched in version 10.0.42.

MajorDoMo (aka Major Domestic Module) is vulnerable to unauthenticated OS command injection via rc/index.php. The $param variable from user input is interpolated into a command string within double quotes without sanitization via escapeshellarg(). The command is inserted into a database queue by safe_exec(), which performs no sanitization. The cycle_execs.php script, which is web-accessible without authentication, retrieves queued commands and passes them directly to exec(). An attacker can exploit a race condition by first triggering cycle_execs.php (which purges the queue and enters a polling loop), then injecting a malicious command via the rc endpoint while the worker is polling. The injected shell metacharacters expand inside double quotes, achieving remote code execution within one second.

Vvveb before version 1.0.8.2 contains a hard-coded credentials vulnerability in its docker-compose-apache.yaml configuration that allows unauthenticated attackers to access the bundled phpMyAdmin container with pre-configured database credentials. Attackers can connect to the phpMyAdmin port to gain unrestricted read and write access to the entire Vvveb database, including administrator password hashes, customer personally identifiable information, and order data, enabling account takeover and data manipulation.

Anviz CX2 Lite and CX7 are vulnerable to unauthenticated firmware uploads. This causes crafted archives to be accepted, enabling attackers to plant and execute code and obtain a reverse shell.

PROSCEND - PROSCEND / ADVICE .Ltd - G/5G Industrial Cellular Router (with GPS)4 Unauthenticated OS Command Injection Proscend M330-w / M33-W5 / M350-5G / M350-W5G / M350-6 / M350-W6 / M301-G / M301-GW ADVICE ICR 111WG / https://www.proscend.com/en/category/industrial-Cellular-Router/industrial-Cellular-Router.html https://cdn.shopify.com/s/files/1/0036/9413/3297/files/ADVICE_Industrial_4G_LTE_Cellular_Router_ICR111WG.pdf?v=1620814301

A vulnerability was determined in Sangfor Operation and Maintenance Management System up to 3.0.8. Impacted is the function WriterHandle.getCmd of the file /isomp-protocol/protocol/getCmd. This manipulation of the argument sessionPath causes os command injection. Remote exploitation of the attack is possible. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.

Fleet is open source device management software. Prior to 4.81.1, a command injection vulnerability in Fleet's software installer pipeline allows an attacker to achieve arbitrary code execution as root (macOS/Linux) or SYSTEM (Windows) on managed hosts when an uninstall is triggered for a crafted software package. Version 4.81.1 patches the issue.

Vulnerability in the Oracle Advanced Inbound Telephony product of Oracle E-Business Suite (component: Setup and Administration). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Advanced Inbound Telephony. Successful attacks of this vulnerability can result in takeover of Oracle Advanced Inbound Telephony. CVSS 3.1 Base Score 9.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H).

Pi-hole Admin Interface is a web interface for managing Pi-hole, a network-level ad and internet tracker blocking application. Versions prior to 6.0 have a critical OS Command Injection vulnerability in the savesettings.php file. The application takes the user-controlled $_POST['webtheme'] parameter and concatenates it directly into a system command executed via PHP's exec() function. Since the input is neither sanitized nor validated before being passed to the shell, an attacker can append arbitrary system commands to the intended pihole command. Furthermore, because the command is executed with sudo privileges, the injected commands will run with elevated (likely root) privileges. Version 6.0 patches the issue.

wenxian is a tool to generate BIBTEX files from given identifiers (DOI, PMID, arXiv ID, or paper title). In versions 0.3.1 and prior, a GitHub Actions workflow uses untrusted user input from issue_comment.body directly inside a shell command, allowing potential command injection and arbitrary code execution on the runner. At time of publication, there are no publicly available patches.

Web page which "wizardpwd.asp" ALLNET Router model WR0500AC is prone to Authorization bypass vulnerability – the password, located at "admin" allows changing the http[s]://wizardpwd.asp/cgi-bin. Does not validate the user's identity and can be accessed publicly.

Tenda AX1803 v1.0.0.1_2890 was discovered to contain a command injection vulnerability via the function WanParameterSetting.

Authentication Bypass vulnerability in miniOrange OAuth 2.0 client for SSO plugin <= 1.11.3 at WordPress.

Instantel Micromate lacks authentication on a configuration port which could allow an attacker to execute commands if connected.

Missing authentication for critical function vulnerability in UNIMO Technology digital video recorders (UDR-JA1004/JA1008/JA1016 firmware versions v1.0.20.13 and earlier, and UDR-JA1016 firmware versions v2.0.20.13 and earlier) allows a remote unauthenticated attacker to execute an arbitrary OS command by sending a specially crafted request to the affected device web interface.

PaddlePaddle before 2.6.0 has a command injection in _wget_download. This resulted in the ability to execute arbitrary commands on the operating system.

Improper neutralization of special elements used in an os command ('os command injection') in Microsoft Bing Images allows an unauthorized attacker to execute code over a network.

Flowsint is an open-source OSINT graph exploration tool designed for cybersecurity investigation, transparency, and verification. Flowsint allows a user to create investigations, which are used to manage sketches and analyses. Sketches have controllable graphs, which are comprised of nodes and relationships. The sketches contain information on an OSINT target (usernames, websites, etc) within these nodes and relationships. The nodes can have automated processes execute on them called 'transformers'. A remote attacker can create a sketch, then trigger the 'org_to_asn' transform on an organization node to execute arbitrary OS commands as root on the host machine via shell metacharacters and a docker container escape. Commit b52cbbb904c8013b74308d58af88bc7dbb1b055c appears to remove the code that causes this issue.

Xerte Online Toolkits versions 3.14 and earlier contain an unauthenticated arbitrary file upload vulnerability in the template import functionality that allows remote attackers to execute arbitrary code by uploading a crafted ZIP archive containing malicious PHP payloads. Attackers can bypass authentication checks in the import.php file to upload a template archive with PHP code in the media directory, which gets extracted to a web-accessible path where the malicious PHP can be directly accessed and executed under the web server context.