A vulnerability in SenseLive X3050’s remote management service allows firmware retrieval and update operations to be performed without authentication or authorization. The service accepts firmware-related requests from any reachable host and does not verify user privileges, integrity of uploaded images, or the authenticity of provided firmware.

A vulnerability exists in SenseLive X3050’s web management interface in which password updates are not reliably applied due to improper handling of credential changes on the backend. After the device undergoes a factory restore using the SenseLive Config 2.0 tool, the interface may indicate that the password update was successful; however, the system may continue to accept the previous or default credentials, demonstrating that the password-change process is not consistently enforced. Even after a factory reset, attempted password changes may fail to propagate correctly.

A vulnerability in SenseLive X3050’s web management interface allows authentication logic to be performed entirely on the client side, relying on hardcoded values within browser-executed scripts rather than server-side verification. An attacker with access to the login page could retrieve these exposed parameters and gain unauthorized access to administrative functionality.

A vulnerability in  SenseLive X3050’s web management interface allows unauthorized access to certain configuration endpoints due to improper access control enforcement. An attacker with network access to the device may be able to bypass the intended authentication mechanism and directly interact with sensitive configuration functions.

A vulnerability in SenseLive X3050’s management ecosystem allows unauthenticated discovery of deployed units through the vendor’s management protocol, enabling identification of device presence, identifiers, and management interfaces without requiring credentials. Because discovery functions are exposed by the underlying service rather than gated by authentication, an attacker on the same network segment can rapidly enumerate targeted devices.

A vulnerability exists in SenseLive X3050's web management interface that allows critical configuration parameters to be modified without sufficient authentication or server-side validation. By applying unsupported or disruptive values to recovery mechanisms and network settings, an attacker can induce a persistent lockout state. Because the device lacks a physical reset button, recovery requires specialized technical access via the console to perform a factory reset, resulting in a total denial-of-service for the gateway and its connected RS-485 downstream systems.

A vulnerability has been identified in SINEMA Remote Connect Server (All versions < V3.1). There is a missing authentication verification for a resource used to change the roles and permissions of a user. This could allow an attacker to change the permissions of any user and gain the privileges of an administrative user.

The official memcached docker images before 1.5.11-alpine (Alpine specific) contain a blank password for a root user. System using the memcached docker container deployed by affected versions of the docker image may allow a remote attacker to achieve root access with a blank password.

Langflow versions prior to 1.3.0 are susceptible to code injection in the /api/v1/validate/code endpoint. A remote and unauthenticated attacker can send crafted HTTP requests to execute arbitrary code.

The official drupal docker images before 8.5.10-fpm-alpine (Alpine specific) contain a blank password for a root user. System using the drupal docker container deployed by affected versions of the docker image may allow a remote attacker to achieve root access with a blank password.

Vulnerability in the Oracle Advanced Inbound Telephony product of Oracle E-Business Suite (component: Setup and Administration). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Advanced Inbound Telephony. Successful attacks of this vulnerability can result in takeover of Oracle Advanced Inbound Telephony. CVSS 3.1 Base Score 9.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H).

goshs is a SimpleHTTPServer written in Go. Prior to 2.0.0-beta.6, goshs contains an SFTP authentication bypass when the documented empty-username basic-auth syntax is used. If the server is started with -b ':pass' together with -sftp, goshs accepts that configuration but does not install any SFTP password handler. As a result, an unauthenticated network attacker can connect to the SFTP service and access files without a password. This vulnerability is fixed in 2.0.0-beta.6.

A vulnerability has been identified in SICAM GridEdge (Classic) (All versions < V2.6.6). The affected application does not require authenticated access for privileged functions. This could allow an unauthenticated attacker to create a new user with administrative permissions.

The official adminer docker images before 4.7.0-fastcgi contain a blank password for a root user. System using the adminer docker container deployed by affected versions of the docker image may allow a remote attacker to achieve root access with a blank password.

GCB/FCB Audit Software developed by DrangSoft has a Missing Authentication vulnerability, allowing unauthenticated remote attackers to directly access certain APIs to create a new administrative account.

The official rabbitmq docker images before 3.7.13-beta.1-management-alpine (Alpine specific) contain a blank password for a root user. System using the rabbitmq docker container deployed by affected versions of the docker image may allow a remote attacker to achieve root access with a blank password.

marimo is a reactive Python notebook. Prior to 0.23.0, Marimo has a Pre-Auth RCE vulnerability. The terminal WebSocket endpoint /terminal/ws lacks authentication validation, allowing an unauthenticated attacker to obtain a full PTY shell and execute arbitrary system commands. Unlike other WebSocket endpoints (e.g., /ws) that correctly call validate_auth() for authentication, the /terminal/ws endpoint only checks the running mode and platform support before accepting connections, completely skipping authentication verification. This vulnerability is fixed in 0.23.0.

CrowdStrike has released security updates to address a critical unauthenticated path traversal vulnerability (CVE-2026-40050) in LogScale. This vulnerability only requires mitigation by customers that host specific versions of LogScale and does not affect Next-Gen SIEM customers. The vulnerability exists in a specific cluster API endpoint that, if exposed, allows a remote attacker to read arbitrary files from the server filesystem without authentication. Next-Gen SIEM customers are not affected and do not need to take any action. CrowdStrike mitigated the vulnerability for LogScale SaaS customers by deploying network-layer blocks to all clusters on April 7, 2026. We have proactively reviewed all log data and there is no evidence of exploitation. LogScale Self-hosted customers should upgrade to a patched version immediately to remediate the vulnerability. CrowdStrike identified this vulnerability during continuous and ongoing product testing.

A vulnerability in the web interface of Cisco RV132W ADSL2+ Wireless-N VPN Routers and Cisco RV134W VDSL2 Wireless-AC VPN Routers could allow an unauthenticated, remote attacker to view configuration parameters for an affected device, which could lead to the disclosure of confidential information. The vulnerability is due to the absence of user authentication requirements for certain pages that are part of the web interface and contain confidential information for an affected device. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device and examining the HTTP response to the request. A successful exploit could allow the attacker to view configuration parameters, including the administrator password, for the affected device. Cisco Bug IDs: CSCvg92739, CSCvh60172.

Vulnerability in the Oracle Scripting product of Oracle E-Business Suite (component: iSurvey Module). Supported versions that are affected are 12.2.3-12.2.14. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Scripting. Successful attacks of this vulnerability can result in takeover of Oracle Scripting. CVSS 3.1 Base Score 9.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H).

Anviz CX2 Lite and CX7 are vulnerable to unauthenticated firmware uploads. This causes crafted archives to be accepted, enabling attackers to plant and execute code and obtain a reverse shell.

Password recovery vulnerability in SICK SIM1004 Partnumber 1098148 with firmware version <2.0.0 allows an unprivileged remote attacker to gain access to the userlevel defined as RecoverableUserLevel by invocating the password recovery mechanism method. This leads to an increase in their privileges on the system and thereby affecting the confidentiality integrity and availability of the system. An attacker can expect repeatable success by exploiting the vulnerability. The recommended solution is to update the firmware to a version >= 2.0.0 as soon as possible (available in SICK Support Portal).

Password recovery vulnerability in SICK SIM1000 FX Partnumber 1097816 and 1097817 with firmware version <1.6.0 allows an unprivileged remote attacker to gain access to the userlevel defined as RecoverableUserLevel by invocating the password recovery mechanism method. This leads to an increase in their privileges on the system and thereby affecting the confidentiality integrity and availability of the system. An attacker can expect repeatable success by exploiting the vulnerability. The recommended solution is to update the firmware to a version >= 1.6.0 as soon as possible (available in SICK Support Portal).

OneUptime is an open-source monitoring and observability platform. Prior to version 10.0.42, the Worker service's ManualAPI exposes workflow execution endpoints (GET /workflow/manual/run/:workflowId and POST /workflow/manual/run/:workflowId) without any authentication middleware. An attacker who can obtain or guess a workflow ID can trigger arbitrary workflow execution with attacker-controlled input data, enabling JavaScript code execution, notification abuse, and data manipulation. This issue has been patched in version 10.0.42.

Version 1.0.0 of the Instana Dynamic APM Docker image contains a blank password for the root user. Systems deployed using affected versions of the Instana Dynamic APM container may allow a remote attacker to achieve root access with a blank password.

Password recovery vulnerability in SICK SIM4000 (PPC) Partnumber 1078787 allows an unprivileged remote attacker to gain access to the userlevel defined as RecoverableUserLevel by invocating the password recovery mechanism method. This leads to an increase in their privileges on the system and thereby affecting the confidentiality integrity and availability of the system. An attacker can expect repeatable success by exploiting the vulnerability. The firmware versions <=1.10.1 allow to optionally disable device configuration over the network interfaces. Please make sure that you apply general security practices when operating the SIM4000. A fix is planned but not yet scheduled.

The TP-240 (aka tp240dvr) component in Mitel MiCollab before 9.4 SP1 FP1 and MiVoice Business Express through 8.1 allows remote attackers to obtain sensitive information and cause a denial of service (performance degradation and excessive outbound traffic). This was exploited in the wild in February and March 2022 for the TP240PhoneHome DDoS attack.

Veeam Backup & Replication 10.x and 11.x has Incorrect Access Control (issue 1 of 2).

The MS27102A Remote Spectrum Monitor is vulnerable to an authentication bypass that allows unauthorized users to access and manipulate its management interface. Because the device provides no mechanism to enable or configure authentication, the issue is inherent to its design rather than a deployment error.

The official plone Docker images before version of 4.3.18-alpine (Alpine specific) contain a blank password for a root user. System using the plone docker container deployed by affected versions of the docker image may allow a remote attacker to achieve root access with a blank password.

Missing authentication for critical function vulnerability in First Corporation's DVRs allows a remote unauthenticated attacker to rewrite or obtain the configuration information of the affected device. Note that updates are provided only for Late model of CFR-4EABC, CFR-4EAB, CFR-8EAB, CFR-16EAB, MD-404AB, and MD-808AB. As for the other products, apply the workaround.

Xerte Online Toolkits versions 3.14 and earlier contain an unauthenticated arbitrary file upload vulnerability in the template import functionality that allows remote attackers to execute arbitrary code by uploading a crafted ZIP archive containing malicious PHP payloads. Attackers can bypass authentication checks in the import.php file to upload a template archive with PHP code in the media directory, which gets extracted to a web-accessible path where the malicious PHP can be directly accessed and executed under the web server context.

Langflow is a tool for building and deploying AI-powered agents and workflows. In versions prior to 1.9.0, the POST /api/v1/build_public_tmp/{flow_id}/flow endpoint allows building public flows without requiring authentication. When the optional data parameter is supplied, the endpoint uses attacker-controlled flow data (containing arbitrary Python code in node definitions) instead of the stored flow data from the database. This code is passed to exec() with zero sandboxing, resulting in unauthenticated remote code execution. This is distinct from CVE-2025-3248, which fixed /api/v1/validate/code by adding authentication. The build_public_tmp endpoint is designed to be unauthenticated (for public flows) but incorrectly accepts attacker-supplied flow data containing arbitrary executable code. This issue has been fixed in version 1.9.0.

Nginx UI is a web user interface for the Nginx web server. In versions 2.3.5 and prior, the nginx-ui MCP (Model Context Protocol) integration exposes two HTTP endpoints: /mcp and /mcp_message. While /mcp requires both IP whitelisting and authentication (AuthRequired() middleware), the /mcp_message endpoint only applies IP whitelisting - and the default IP whitelist is empty, which the middleware treats as "allow all". This means any network attacker can invoke all MCP tools without authentication, including restarting nginx, creating/modifying/deleting nginx configuration files, and triggering automatic config reloads - achieving complete nginx service takeover. At time of publication, there are no publicly available patches.

A file write vulnerability exists in the OAS Engine SecureTransferFiles functionality of Open Automation Software OAS Platform V16.00.0112. A specially-crafted series of network requests can lead to remote code execution. An attacker can send a sequence of requests to trigger this vulnerability.

Configuration issue in Java Management Extensions (JMX) in TIBCO BPM Enterprise version 4.x allows unauthorised access.

Axeda agent (All versions) and Axeda Desktop Server for Windows (All versions) may allow an attacker to send certain commands to a specific port without authentication. Successful exploitation of this vulnerability could allow a remote unauthenticated attacker to obtain full file-system access and remote code execution.

Vasion Print (formerly PrinterLogic) before Virtual Appliance Host 22.0.913 Application 20.0.2253 allows Addition of Partial Admin Users Without Authentication V-2024-002.

TerraMaster NAS 4.2.29 and earlier allows remote attackers to discover the administrative password by sending "User-Agent: TNAS" to module/api.php?mobile/webNasIPS and then reading the PWD field in the response.

The official vault docker images before 0.11.6 contain a blank password for a root user. System using the vault docker container deployed by affected versions of the docker image may allow a remote attacker to achieve root access with a blank password.

A vulnerability in the REST API of Cisco IoT Field Network Director (FND) could allow an unauthenticated, remote attacker to access the back-end database of an affected system. The vulnerability exists because the affected software does not properly authenticate REST API calls. An attacker could exploit this vulnerability by obtaining a cross-site request forgery (CSRF) token and then using the token with REST API requests. A successful exploit could allow the attacker to access the back-end database of the affected device and read, alter, or drop information.

Garden is an automation platform for Kubernetes development and testing. In versions prior to 0.12.39 multiple endpoints did not require authentication. In some operating modes this allows for an attacker to gain access to the application erroneously. The configuration is leaked through the /api endpoint on the local server that is responsible for serving the Garden dashboard. At the moment, this server is accessible to 0.0.0.0 which makes it accessible to anyone on the same network (or anyone on the internet if they are on a public, static IP). This may lead to the ability to compromise credentials, secrets or environment variables. Users are advised to upgrade to version 0.12.39 as soon as possible. Users unable to upgrade should use a firewall blocking access to port 9777 from all untrusted network machines.

In IOBit IOTransfer 4.3.1.1561, an unauthenticated attacker can send GET and POST requests to Airserv and gain arbitrary read/write access to the entire file-system (with admin privileges) on the victim's endpoint, which can result in data theft and remote code execution.

A vulnerability was determined in DataLinkDC dinky up to 1.2.5. This affects the function addInterceptors of the file dinky-admin/src/main/java/org/dinky/configure/AppConfig.java of the component OpenAPI Endpoint. Executing a manipulation can lead to missing authentication. It is possible to launch the attack remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.

Authentication is currently unsupported in Haas Controller version 100.20.000.1110 when using the “Ethernet Q Commands” service, which allows any user on the same network segment as the controller (even while connected remotely) to access the service and write unauthorized macros to the device.

A CWE-306 "Missing Authentication for Critical Function" in maxprofile/accounts/routes.lua in Q-Free MaxTime less than or equal to version 2.11.0 allows an unauthenticated remote attacker to reset user PINs via crafted HTTP requests.

A CWE-306 "Missing Authentication for Critical Function" in maxprofile/guest-mode/routes.lua in Q-Free MaxTime less than or equal to version 2.11.0 allows an unauthenticated remote attacker to enable passwordless guest mode via crafted HTTP requests.

Remote shell service (RSH) in Infinera MTC-9 version R22.1.1.0275 allows an attacker to utilize password-less user accounts and obtain system access by activating a reverse shell.This issue affects MTC-9: from R22.1.1.0275 before R23.0.

A firmware update vulnerability exists in the login.cgi functionality of Wavlink AC3000 M33A8.V5030.210505. A specially crafted HTTP request can lead to arbitrary firmware update. An attacker can send an unauthenticated message to trigger this vulnerability.

Improper configuration of the SSH service in Infinera MTC-9 allows an unauthenticated attacker to execute arbitrary commands and access data on file system . This issue affects MTC-9: from R22.1.1.0275 before R23.0.