A security vulnerability has been detected in LB-LINK BL-WR9000 2.4.9. The impacted element is the function sub_44D844 of the file /goform/get_hidessid_cfg. The manipulation leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A security flaw has been discovered in B-Link BL-AC2100 up to 1.0.3. Affected by this issue is the function delshrpath of the file /goform/set_delshrpath_cfg of the component Web Management Interface. The manipulation of the argument Type results in stack-based buffer overflow. The attack may be performed from remote. The exploit has been released to the public and may be exploited. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was detected in LB-LINK BL-WR9000 2.4.9. This affects the function sub_458754 of the file /goform/set_wifi. The manipulation results in command injection. It is possible to launch the attack remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, was found in LB-LINK AC1900 Router 1.0.2. Affected is the function websGetVar of the file /goform/set_manpwd. The manipulation of the argument routepwd  leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in LB-LINK AC1900 Router 1.0.2 and classified as critical. Affected by this issue is the function websGetVar of the file /goform/set_blacklist. The manipulation of the argument mac/enable leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in LB-LINK AC1900 Router 1.0.2 and classified as critical. Affected by this vulnerability is the function websGetVar of the file /goform/set_cmd. The manipulation of the argument cmd leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

LB-LINK BL-WR 1300H v.1.0.4 contains hardcoded credentials stored in /etc/shadow which are easily guessable.

A weakness has been identified in LB-LINK BL-X26 1.2.8. The impacted element is an unknown function of the file /goform/set_hidessid_cfg of the component HTTP Handler. This manipulation of the argument enable causes os command injection. The attack can be initiated remotely. The exploit has been made available to the public and could be exploited. The vendor was contacted early about this disclosure but did not respond in any way.

A security vulnerability has been detected in LB-LINK BL-X26 1.2.8. This affects an unknown function of the file /goform/set_blacklist of the component HTTP Handler. Such manipulation of the argument mac leads to os command injection. The attack can be launched remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, was found in LB-LINK BL-AC1900, BL-AC2100_AZ3, BL-AC3600, BL-AX1800, BL-AX5400P and BL-WR9000 up to 20250702. Affected is the function reboot/restore of the file /cgi-bin/lighttpd.cgi of the component Web Interface. The manipulation leads to improper authentication. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

LB-LINK BL-W1210M v2.0 was discovered to store user credentials in plaintext within the router's firmware.

LB-LINK BL-AC1900_2.0 v1.0.1, LB-LINK BL-WR9000 v2.4.9, LB-LINK BL-X26 v1.2.5, and LB-LINK BL-LTE300 v1.0.8 were discovered to contain a command injection vulnerability via the mac, time1, and time2 parameters at /goform/set_LimitClient_cfg.

File Sharing Wizard version 1.5.0 build 2008 is affected by a Structured Exception Handler based buffer overflow vulnerability. An unauthenticated attacker is able to perform remote command execution and obtain a command shell by sending a HTTP GET request including the malicious payload in the URL. A similar issue to CVE-2019-17415, CVE-2019-16724, and CVE-2010-2331.

An integer overflow in parse_mqtt in mongoose.c in Cesanta Mongoose 6.16 allows an attacker to achieve remote DoS (infinite loop), or possibly cause an out-of-bounds write, by sending a crafted MQTT protocol packet.

A security vulnerability has been detected in H3C Magic B0 up to 100R002. This vulnerability affects the function Edit_BasicSSID of the file /goform/aspForm. Such manipulation of the argument param leads to buffer overflow. The attack can be executed remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in H3C Magic B1 up to 100R004. The affected element is the function SetAPWifiorLedInfoById of the file /goform/aspForm. The manipulation of the argument param leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Western Digital My Cloud EX2 Ultra firmware 2.31.183 allows web users (including guest accounts) to remotely execute arbitrary code via a download_mgr.cgi stack-based buffer overflow.

In all versions of libyang before 1.0-r5, a stack-based buffer overflow was discovered in the way libyang parses YANG files with a leaf of type "identityref". An application that uses libyang to parse untrusted YANG files may be vulnerable to this flaw, which would allow an attacker to cause a denial of service or possibly gain code execution.

A vulnerability was detected in Tenda F451 1.0.0.7. Affected is the function fromDhcpListClient of the file /goform/DhcpListClient of the component httpd. The manipulation of the argument page results in stack-based buffer overflow. The attack can be launched remotely. The exploit is now public and may be used.

A vulnerability in the Import Cisco IMC configuration utility of Cisco Integrated Management Controller (IMC) could allow an authenticated, remote attacker to cause a denial of service (DoS) condition and implement arbitrary commands with root privileges on an affected device. The vulnerability is due to improper bounds checking by the import-config process. An attacker could exploit this vulnerability by sending malicious packets to an affected device. When the packets are processed, an exploitable buffer overflow condition may occur. A successful exploit could allow the attacker to implement arbitrary code on the affected device with elevated privileges.

In all versions of libyang before 1.0-r5, a stack-based buffer overflow was discovered in the way libyang parses YANG files with a leaf of type "bits". An application that uses libyang to parse untrusted YANG files may be vulnerable to this flaw, which would allow an attacker to cause a denial of service or possibly gain code execution.

A vulnerability was found in Belkin F9K1015 1.00.10. This affects the function formCrossBandSwitch of the file /goform/formCrossBandSwitch. Performing a manipulation of the argument webpage results in stack-based buffer overflow. The attack can be initiated remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

Insufficient checks in the USB packet handling of the ShapeShift KeepKey hardware wallet before firmware 6.2.2 allow out-of-bounds writes in the .bss segment via crafted messages. The vulnerability could allow code execution or other forms of impact. It can be triggered by unauthenticated attackers and the interface is reachable via WebUSB.

Tenda PA6 Wi-Fi Powerline extender 1.0.1.21 is vulnerable to a stack-based buffer overflow, caused by improper bounds checking by the "Wireless" section in the web-UI. By sending a specially crafted hostname, a remote attacker could overflow a buffer and execute arbitrary code on the system or cause the application to crash.

X-Plane before 11.41 allows Arbitrary Memory Write via crafted network packets, which could cause a denial of service or arbitrary code execution.

A vulnerability has been found in Tenda AC9 15.03.02.13. Impacted is the function formQuickIndex of the file /goform/QuickIndex of the component POST Request Handler. Such manipulation of the argument PPPOEPassword leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was identified in Tenda AC10 16.03.10.10_multi_TDE01. This affects the function fromSysToolChangePwd of the file /bin/httpd. The manipulation leads to stack-based buffer overflow. The attack may be initiated remotely. Multiple endpoints might be affected.

A stack-based buffer overflow in zap_parse_args in zap.c in zap in Ruckus Unleashed through 200.7.10.102.64 allows remote code execution via an unauthenticated HTTP request.

An issue was discovered in amqp_handle_input in amqp_connection.c in rabbitmq-c 0.9.0. There is an integer overflow that leads to heap memory corruption in the handling of CONNECTION_STATE_HEADER. A rogue server could return a malicious frame header that leads to a smaller target_size value than needed. This condition is then carried on to a memcpy function that copies too much data into a heap buffer.

Western Digital My Cloud EX2 Ultra firmware 2.31.183 allows web users (including guest account) to remotely execute arbitrary code via a stack-based buffer overflow. There is no size verification logic in one of functions in libscheddl.so, and download_mgr.cgi makes it possible to enter large-sized f_idx inputs.

A vulnerability was found in Tenda 4G06 04.06.01.29. This vulnerability affects the function fromDhcpListClient of the file /goform/DhcpListClient of the component Endpoint. Performing a manipulation of the argument page results in stack-based buffer overflow. The attack can be initiated remotely. The exploit has been made public and could be used.

An issue was discovered in libsixel 1.8.2. There is a heap-based buffer overflow in the function sixel_decode_raw_impl at fromsixel.c.

A vulnerability was found in D-Link DIR-605L 2.13B01. This vulnerability affects the function formAdvNetwork of the file /goform/formAdvNetwork of the component POST Request Handler. Performing a manipulation of the argument curTime results in buffer overflow. Remote exploitation of the attack is possible. The exploit has been made public and could be used. This vulnerability only affects products that are no longer supported by the maintainer.

Corosync through 3.1.9, if encryption is disabled or the attacker knows the encryption key, has a stack-based buffer overflow in orf_token_endian_convert in exec/totemsrp.c via a large UDP packet.

A vulnerability has been identified in SPPA-T3000 MS3000 Migration Server (All versions). An attacker with network access to the MS3000 Server can cause a Denial-of-Service condition and potentially gain remote code execution by sending specifically crafted packets to 5010/tcp. This vulnerability is independent from CVE-2019-18323, CVE-2019-18324, CVE-2019-18326, CVE-2019-18327, CVE-2019-18328, CVE-2019-18329, and CVE-2019-18330. Please note that an attacker needs to have network access to the MS3000 in order to exploit this vulnerability. At the time of advisory publication no public exploitation of this security vulnerability was known.

In Network Security Services (NSS) before 3.46, several cryptographic primitives had missing length checks. In cases where the application calling the library did not perform a sanity check on the inputs it could result in a crash due to a buffer overflow.

A buffer overflow vulnerability has been found in the baremetal component of Apache CloudStack. This applies to all versions prior to 4.13.1. The vulnerability is due to the lack of validation of the mac parameter in baremetal virtual router. If you insert an arbitrary shell command into the mac parameter, v-router will process the command. For example: Normal: http://{GW}:10086/baremetal/provisiondone/{mac}, Abnormal: http://{GW}:10086/baremetal/provisiondone/#';whoami;#. Mitigation of this issue is an upgrade to Apache CloudStack 4.13.1.0 or beyond.

A security flaw has been discovered in Trendnet TEW-657BRM 1.00.1. The impacted element is the function update_pcdb of the file /setup.cgi. The manipulation of the argument mac_pc_dba results in stack-based buffer overflow. The attack can be launched remotely. The exploit has been released to the public and may be used for attacks. The vendor confirms, that "[t]he product in question (...) has been discontinued and end of life since June 23, 2011, that is more than 14 years ago. We no longer provide support for this product, so we are not able to confirm the vulnerabilities. We will make an announcement on our website's product support page and notify customers who registered their products with us." This vulnerability only affects products that are no longer supported by the maintainer.

A security flaw has been discovered in Belkin F9K1015 1.00.10. Impacted is the function formSetPassword of the file /goform/formSetPassword. The manipulation of the argument webpage results in stack-based buffer overflow. The attack may be launched remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

NetSarang XFTP Client 6.0149 and earlier version contains a buffer overflow vulnerability caused by improper boundary checks when copying file name from an attacker controlled FTP server. That leads attacker to execute arbitrary code by sending a crafted filename.

A vulnerability has been identified in SPPA-T3000 MS3000 Migration Server (All versions). An attacker with network access to the MS3000 Server can cause a Denial-of-Service condition and potentially gain remote code execution by sending specifically crafted packets to 5010/tcp. This vulnerability is independent from CVE-2019-18323, CVE-2019-18325, CVE-2019-18326, CVE-2019-18327, CVE-2019-18328, CVE-2019-18329, and CVE-2019-18330. Please note that an attacker needs to have network access to the MS3000 in order to exploit this vulnerability. At the time of advisory publication no public exploitation of this security vulnerability was known.

A vulnerability has been identified in SPPA-T3000 MS3000 Migration Server (All versions). An attacker with network access to the MS3000 Server can cause a Denial-of-Service condition and potentially gain remote code execution by sending specifically crafted packets to 5010/tcp. This vulnerability is independent from CVE-2019-18323, CVE-2019-18324, CVE-2019-18325, CVE-2019-18327, CVE-2019-18328, CVE-2019-18329, and CVE-2019-18330. Please note that an attacker needs to have network access to the MS3000 in order to exploit this vulnerability. At the time of advisory publication no public exploitation of this security vulnerability was known.

In Advantech DiagAnywhere Server, Versions 3.07.11 and prior, multiple stack-based buffer overflow vulnerabilities exist in the file transfer service listening on the TCP port. Successful exploitation could allow an unauthenticated attacker to execute arbitrary code with the privileges of the user running DiagAnywhere Server.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of D-Link DCS-960L v1.07.102. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HNAP service, which listens on TCP port 80 by default. When parsing the SOAPAction request header, the process does not properly validate the length of user-supplied data prior to copying it to a stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the admin user. Was ZDI-CAN-8458.

In MiniShare 1.4.1, there is a stack-based buffer overflow via an HTTP CONNECT request, which allows an attacker to achieve arbitrary code execution, a similar issue to CVE-2018-19862 and CVE-2018-19861. NOTE: this product is discontinued.

Buffer overflows were discovered in the CoAP library in Arm Mbed OS 5.14.0. The CoAP parser is responsible for parsing received CoAP packets. The function sn_coap_parser_options_parse() parses CoAP input linearly using a while loop. Once an option is parsed in a loop, the current point (*packet_data_pptr) is increased correspondingly. The pointer is restricted by the size of the received buffer, as well as by the 0xFF delimiter byte. Inside each while loop, the check of the value of *packet_data_pptr is not strictly enforced. More specifically, inside a loop, *packet_data_pptr could be increased and then dereferenced without checking. Moreover, there are many other functions in the format of sn_coap_parser_****() that do not check whether the pointer is within the bounds of the allocated buffer. All of these lead to heap-based or stack-based buffer overflows, depending on how the CoAP packet buffer is allocated.

A weakness has been identified in Tenda F451 1.0.0.7_cn_svn7958. This issue affects the function fromSetIpBind of the file /goform/SetIpBind. Executing a manipulation of the argument page can lead to stack-based buffer overflow. The attack may be performed from remote. The exploit has been made available to the public and could be used for attacks.

In shadow before 4.5, the newusers tool could be made to manipulate internal data structures in ways unintended by the authors. Malformed input may lead to crashes (with a buffer overflow or other memory corruption) or other unspecified behaviors. This crosses a privilege boundary in, for example, certain web-hosting environments in which a Control Panel allows an unprivileged user account to create subaccounts.

A vulnerability has been identified in SPPA-T3000 MS3000 Migration Server (All versions). An attacker with network access to the MS3000 Server can cause a Denial-of-Service condition and potentially gain remote code execution by sending specifically crafted packets to 5010/tcp. This vulnerability is independent from CVE-2019-18323, CVE-2019-18324, CVE-2019-18325, CVE-2019-18326, CVE-2019-18328, CVE-2019-18329, and CVE-2019-18330. Please note that an attacker needs to have network access to the MS3000 in order to exploit this vulnerability. At the time of advisory publication no public exploitation of this security vulnerability was known.