In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: remove unused C2H event ID RTW89_MAC_C2H_FUNC_READ_WOW_CAM to prevent out-of-bounds reading The handler of firmware C2H event RTW89_MAC_C2H_FUNC_READ_WOW_CAM isn't implemented, but driver expects number of handlers is NUM_OF_RTW89_MAC_C2H_FUNC_WOW causing out-of-bounds access. Fix it by removing ID. Addresses-Coverity-ID: 1598775 ("Out-of-bounds read")

In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: Initialize the chan_stats array to zero The adapter->chan_stats[] array is initialized in mwifiex_init_channel_scan_gap() with vmalloc(), which doesn't zero out memory. The array is filled in mwifiex_update_chan_statistics() and then the user can query the data in mwifiex_cfg80211_dump_survey(). There are two potential issues here. What if the user calls mwifiex_cfg80211_dump_survey() before the data has been filled in. Also the mwifiex_update_chan_statistics() function doesn't necessarily initialize the whole array. Since the array was not initialized at the start that could result in an information leak. Also this array is pretty small. It's a maximum of 900 bytes so it's more appropriate to use kcalloc() instead vmalloc().

In the Linux kernel, the following vulnerability has been resolved: hfsplus: fix slab-out-of-bounds in hfsplus_bnode_read() The hfsplus_bnode_read() method can trigger the issue: [ 174.852007][ T9784] ================================================================== [ 174.852709][ T9784] BUG: KASAN: slab-out-of-bounds in hfsplus_bnode_read+0x2f4/0x360 [ 174.853412][ T9784] Read of size 8 at addr ffff88810b5fc6c0 by task repro/9784 [ 174.854059][ T9784] [ 174.854272][ T9784] CPU: 1 UID: 0 PID: 9784 Comm: repro Not tainted 6.16.0-rc3 #7 PREEMPT(full) [ 174.854281][ T9784] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 174.854286][ T9784] Call Trace: [ 174.854289][ T9784] <TASK> [ 174.854292][ T9784] dump_stack_lvl+0x10e/0x1f0 [ 174.854305][ T9784] print_report+0xd0/0x660 [ 174.854315][ T9784] ? __virt_addr_valid+0x81/0x610 [ 174.854323][ T9784] ? __phys_addr+0xe8/0x180 [ 174.854330][ T9784] ? hfsplus_bnode_read+0x2f4/0x360 [ 174.854337][ T9784] kasan_report+0xc6/0x100 [ 174.854346][ T9784] ? hfsplus_bnode_read+0x2f4/0x360 [ 174.854354][ T9784] hfsplus_bnode_read+0x2f4/0x360 [ 174.854362][ T9784] hfsplus_bnode_dump+0x2ec/0x380 [ 174.854370][ T9784] ? __pfx_hfsplus_bnode_dump+0x10/0x10 [ 174.854377][ T9784] ? hfsplus_bnode_write_u16+0x83/0xb0 [ 174.854385][ T9784] ? srcu_gp_start+0xd0/0x310 [ 174.854393][ T9784] ? __mark_inode_dirty+0x29e/0xe40 [ 174.854402][ T9784] hfsplus_brec_remove+0x3d2/0x4e0 [ 174.854411][ T9784] __hfsplus_delete_attr+0x290/0x3a0 [ 174.854419][ T9784] ? __pfx_hfs_find_1st_rec_by_cnid+0x10/0x10 [ 174.854427][ T9784] ? __pfx___hfsplus_delete_attr+0x10/0x10 [ 174.854436][ T9784] ? __asan_memset+0x23/0x50 [ 174.854450][ T9784] hfsplus_delete_all_attrs+0x262/0x320 [ 174.854459][ T9784] ? __pfx_hfsplus_delete_all_attrs+0x10/0x10 [ 174.854469][ T9784] ? rcu_is_watching+0x12/0xc0 [ 174.854476][ T9784] ? __mark_inode_dirty+0x29e/0xe40 [ 174.854483][ T9784] hfsplus_delete_cat+0x845/0xde0 [ 174.854493][ T9784] ? __pfx_hfsplus_delete_cat+0x10/0x10 [ 174.854507][ T9784] hfsplus_unlink+0x1ca/0x7c0 [ 174.854516][ T9784] ? __pfx_hfsplus_unlink+0x10/0x10 [ 174.854525][ T9784] ? down_write+0x148/0x200 [ 174.854532][ T9784] ? __pfx_down_write+0x10/0x10 [ 174.854540][ T9784] vfs_unlink+0x2fe/0x9b0 [ 174.854549][ T9784] do_unlinkat+0x490/0x670 [ 174.854557][ T9784] ? __pfx_do_unlinkat+0x10/0x10 [ 174.854565][ T9784] ? __might_fault+0xbc/0x130 [ 174.854576][ T9784] ? getname_flags.part.0+0x1c5/0x550 [ 174.854584][ T9784] __x64_sys_unlink+0xc5/0x110 [ 174.854592][ T9784] do_syscall_64+0xc9/0x480 [ 174.854600][ T9784] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 174.854608][ T9784] RIP: 0033:0x7f6fdf4c3167 [ 174.854614][ T9784] Code: f0 ff ff 73 01 c3 48 8b 0d 26 0d 0e 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 08 [ 174.854622][ T9784] RSP: 002b:00007ffcb948bca8 EFLAGS: 00000206 ORIG_RAX: 0000000000000057 [ 174.854630][ T9784] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f6fdf4c3167 [ 174.854636][ T9784] RDX: 00007ffcb948bcc0 RSI: 00007ffcb948bcc0 RDI: 00007ffcb948bd50 [ 174.854641][ T9784] RBP: 00007ffcb948cd90 R08: 0000000000000001 R09: 00007ffcb948bb40 [ 174.854645][ T9784] R10: 00007f6fdf564fc0 R11: 0000000000000206 R12: 0000561e1bc9c2d0 [ 174.854650][ T9784] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 174.854658][ T9784] </TASK> [ 174.854661][ T9784] [ 174.879281][ T9784] Allocated by task 9784: [ 174.879664][ T9784] kasan_save_stack+0x20/0x40 [ 174.880082][ T9784] kasan_save_track+0x14/0x30 [ 174.880500][ T9784] __kasan_kmalloc+0xaa/0xb0 [ 174.880908][ T9784] __kmalloc_noprof+0x205/0x550 [ 174.881337][ T9784] __hfs_bnode_create+0x107/0x890 [ 174.881779][ T9784] hfsplus_bnode_find+0x2d0/0xd10 [ 174.882222][ T9784] hfsplus_brec_find+0x2b0/0x520 [ 174.882659][ T9784] hfsplus_delete_all_attrs+0x23b/0x3 ---truncated---

A use-after-free flaw was found in the __ext4_remount in fs/ext4/super.c in ext4 in the Linux kernel. This flaw allows a local user to cause an information leak problem while freeing the old quota file names before a potential failure, leading to a use-after-free.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix mc_data out-of-bounds read warning Clear warning that read mc_data[i-1] may out-of-bounds.

In the Linux kernel, the following vulnerability has been resolved: ALSA: caiaq: fix stack out-of-bounds read in init_card The loop creates a whitespace-stripped copy of the card shortname where `len < sizeof(card->id)` is used for the bounds check. Since sizeof(card->id) is 16 and the local id buffer is also 16 bytes, writing 16 non-space characters fills the entire buffer, overwriting the terminating nullbyte. When this non-null-terminated string is later passed to snd_card_set_id() -> copy_valid_id_string(), the function scans forward with `while (*nid && ...)` and reads past the end of the stack buffer, reading the contents of the stack. A USB device with a product name containing many non-ASCII, non-space characters (e.g. multibyte UTF-8) will reliably trigger this as follows: BUG: KASAN: stack-out-of-bounds in copy_valid_id_string sound/core/init.c:696 [inline] BUG: KASAN: stack-out-of-bounds in snd_card_set_id_no_lock+0x698/0x74c sound/core/init.c:718 The off-by-one has been present since commit bafeee5b1f8d ("ALSA: snd_usb_caiaq: give better shortname") from June 2009 (v2.6.31-rc1), which first introduced this whitespace-stripping loop. The original code never accounted for the null terminator when bounding the copy. Fix this by changing the loop bound to `sizeof(card->id) - 1`, ensuring at least one byte remains as the null terminator.

A use-after-free flaw was found in nfsd4_ssc_setup_dul in fs/nfsd/nfs4proc.c in the NFS filesystem in the Linux Kernel. This issue could allow a local attacker to crash the system or it may lead to a kernel information leak problem.

A use-after-free flaw was found in vhost_net_set_backend in drivers/vhost/net.c in virtio network subcomponent in the Linux kernel due to a double fget. This flaw could allow a local attacker to crash the system, and could even lead to a kernel information leak problem.

A slab-out-of-bound read problem was found in brcmf_get_assoc_ies in drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c in the Linux Kernel. This issue could occur when assoc_info->req_len data is bigger than the size of the buffer, defined as WL_EXTRA_BUF_MAX, leading to a denial of service.

In the Linux kernel, the following vulnerability has been resolved: iio: light: as73211: Ensure buffer holes are zeroed Given that the buffer is copied to a kfifo that ultimately user space can read, ensure we zero it.

In the Linux kernel, the following vulnerability has been resolved: scsi: qedi: Fix crash while reading debugfs attribute The qedi_dbg_do_not_recover_cmd_read() function invokes sprintf() directly on a __user pointer, which results into the crash. To fix this issue, use a small local stack buffer for sprintf() and then call simple_read_from_buffer(), which in turns make the copy_to_user() call. BUG: unable to handle page fault for address: 00007f4801111000 PGD 8000000864df6067 P4D 8000000864df6067 PUD 864df7067 PMD 846028067 PTE 0 Oops: 0002 [#1] PREEMPT SMP PTI Hardware name: HPE ProLiant DL380 Gen10/ProLiant DL380 Gen10, BIOS U30 06/15/2023 RIP: 0010:memcpy_orig+0xcd/0x130 RSP: 0018:ffffb7a18c3ffc40 EFLAGS: 00010202 RAX: 00007f4801111000 RBX: 00007f4801111000 RCX: 000000000000000f RDX: 000000000000000f RSI: ffffffffc0bfd7a0 RDI: 00007f4801111000 RBP: ffffffffc0bfd7a0 R08: 725f746f6e5f6f64 R09: 3d7265766f636572 R10: ffffb7a18c3ffd08 R11: 0000000000000000 R12: 00007f4881110fff R13: 000000007fffffff R14: ffffb7a18c3ffca0 R15: ffffffffc0bfd7af FS: 00007f480118a740(0000) GS:ffff98e38af00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f4801111000 CR3: 0000000864b8e001 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ? __die_body+0x1a/0x60 ? page_fault_oops+0x183/0x510 ? exc_page_fault+0x69/0x150 ? asm_exc_page_fault+0x22/0x30 ? memcpy_orig+0xcd/0x130 vsnprintf+0x102/0x4c0 sprintf+0x51/0x80 qedi_dbg_do_not_recover_cmd_read+0x2f/0x50 [qedi 6bcfdeeecdea037da47069eca2ba717c84a77324] full_proxy_read+0x50/0x80 vfs_read+0xa5/0x2e0 ? folio_add_new_anon_rmap+0x44/0xa0 ? set_pte_at+0x15/0x30 ? do_pte_missing+0x426/0x7f0 ksys_read+0xa5/0xe0 do_syscall_64+0x58/0x80 ? __count_memcg_events+0x46/0x90 ? count_memcg_event_mm+0x3d/0x60 ? handle_mm_fault+0x196/0x2f0 ? do_user_addr_fault+0x267/0x890 ? exc_page_fault+0x69/0x150 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7f4800f20b4d

In the Linux kernel, the following vulnerability has been resolved: spmi: trace: fix stack-out-of-bound access in SPMI tracing functions trace_spmi_write_begin() and trace_spmi_read_end() both call memcpy() with a length of "len + 1". This leads to one extra byte being read beyond the end of the specified buffer. Fix this out-of-bound memory access by using a length of "len" instead. Here is a KASAN log showing the issue: BUG: KASAN: stack-out-of-bounds in trace_event_raw_event_spmi_read_end+0x1d0/0x234 Read of size 2 at addr ffffffc0265b7540 by task thermal@2.0-ser/1314 ... Call trace: dump_backtrace+0x0/0x3e8 show_stack+0x2c/0x3c dump_stack_lvl+0xdc/0x11c print_address_description+0x74/0x384 kasan_report+0x188/0x268 kasan_check_range+0x270/0x2b0 memcpy+0x90/0xe8 trace_event_raw_event_spmi_read_end+0x1d0/0x234 spmi_read_cmd+0x294/0x3ac spmi_ext_register_readl+0x84/0x9c regmap_spmi_ext_read+0x144/0x1b0 [regmap_spmi] _regmap_raw_read+0x40c/0x754 regmap_raw_read+0x3a0/0x514 regmap_bulk_read+0x418/0x494 adc5_gen3_poll_wait_hs+0xe8/0x1e0 [qcom_spmi_adc5_gen3] ... __arm64_sys_read+0x4c/0x60 invoke_syscall+0x80/0x218 el0_svc_common+0xec/0x1c8 ... addr ffffffc0265b7540 is located in stack of task thermal@2.0-ser/1314 at offset 32 in frame: adc5_gen3_poll_wait_hs+0x0/0x1e0 [qcom_spmi_adc5_gen3] this frame has 1 object: [32, 33) 'status' Memory state around the buggy address: ffffffc0265b7400: 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 ffffffc0265b7480: 04 f3 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00 >ffffffc0265b7500: 00 00 00 00 f1 f1 f1 f1 01 f3 f3 f3 00 00 00 00 ^ ffffffc0265b7580: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffffffc0265b7600: f1 f1 f1 f1 01 f2 07 f2 f2 f2 01 f3 00 00 00 00 ==================================================================

In the Linux kernel, the following vulnerability has been resolved: binfmt_misc: fix shift-out-of-bounds in check_special_flags UBSAN reported a shift-out-of-bounds warning: left shift of 1 by 31 places cannot be represented in type 'int' Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x8d/0xcf lib/dump_stack.c:106 ubsan_epilogue+0xa/0x44 lib/ubsan.c:151 __ubsan_handle_shift_out_of_bounds+0x1e7/0x208 lib/ubsan.c:322 check_special_flags fs/binfmt_misc.c:241 [inline] create_entry fs/binfmt_misc.c:456 [inline] bm_register_write+0x9d3/0xa20 fs/binfmt_misc.c:654 vfs_write+0x11e/0x580 fs/read_write.c:582 ksys_write+0xcf/0x120 fs/read_write.c:637 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x34/0x80 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x4194e1 Since the type of Node's flags is unsigned long, we should define these macros with same type too.

In the Linux kernel, the following vulnerability has been resolved: capabilities: fix undefined behavior in bit shift for CAP_TO_MASK Shifting signed 32-bit value by 31 bits is undefined, so changing significant bit to unsigned. The UBSAN warning calltrace like below: UBSAN: shift-out-of-bounds in security/commoncap.c:1252:2 left shift of 1 by 31 places cannot be represented in type 'int' Call Trace: <TASK> dump_stack_lvl+0x7d/0xa5 dump_stack+0x15/0x1b ubsan_epilogue+0xe/0x4e __ubsan_handle_shift_out_of_bounds+0x1e7/0x20c cap_task_prctl+0x561/0x6f0 security_task_prctl+0x5a/0xb0 __x64_sys_prctl+0x61/0x8f0 do_syscall_64+0x58/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd </TASK>

In the Linux kernel, the following vulnerability has been resolved: selinux: Add boundary check in put_entry() Just like next_entry(), boundary check is necessary to prevent memory out-of-bound access.

In the Linux kernel, the following vulnerability has been resolved: i40e: remove read access to debugfs files The 'command' and 'netdev_ops' debugfs files are a legacy debugging interface supported by the i40e driver since its early days by commit 02e9c290814c ("i40e: debugfs interface"). Both of these debugfs files provide a read handler which is mostly useless, and which is implemented with questionable logic. They both use a static 256 byte buffer which is initialized to the empty string. In the case of the 'command' file this buffer is literally never used and simply wastes space. In the case of the 'netdev_ops' file, the last command written is saved here. On read, the files contents are presented as the name of the device followed by a colon and then the contents of their respective static buffer. For 'command' this will always be "<device>: ". For 'netdev_ops', this will be "<device>: <last command written>". But note the buffer is shared between all devices operated by this module. At best, it is mostly meaningless information, and at worse it could be accessed simultaneously as there doesn't appear to be any locking mechanism. We have also recently received multiple reports for both read functions about their use of snprintf and potential overflow that could result in reading arbitrary kernel memory. For the 'command' file, this is definitely impossible, since the static buffer is always zero and never written to. For the 'netdev_ops' file, it does appear to be possible, if the user carefully crafts the command input, it will be copied into the buffer, which could be large enough to cause snprintf to truncate, which then causes the copy_to_user to read beyond the length of the buffer allocated by kzalloc. A minimal fix would be to replace snprintf() with scnprintf() which would cap the return to the number of bytes written, preventing an overflow. A more involved fix would be to drop the mostly useless static buffers, saving 512 bytes and modifying the read functions to stop needing those as input. Instead, lets just completely drop the read access to these files. These are debug interfaces exposed as part of debugfs, and I don't believe that dropping read access will break any script, as the provided output is pretty useless. You can find the netdev name through other more standard interfaces, and the 'netdev_ops' interface can easily result in garbage if you issue simultaneous writes to multiple devices at once. In order to properly remove the i40e_dbg_netdev_ops_buf, we need to refactor its write function to avoid using the static buffer. Instead, use the same logic as the i40e_dbg_command_write, with an allocated buffer. Update the code to use this instead of the static buffer, and ensure we free the buffer on exit. This fixes simultaneous writes to 'netdev_ops' on multiple devices, and allows us to remove the now unused static buffer along with removing the read access.

In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: Fix potential shift-out-of-bounds in brcmf_fw_alloc_request() This patch fixes a shift-out-of-bounds in brcmfmac that occurs in BIT(chiprev) when a 'chiprev' provided by the device is too large. It should also not be equal to or greater than BITS_PER_TYPE(u32) as we do bitwise AND with a u32 variable and BIT(chiprev). The patch adds a check that makes the function return NULL if that is the case. Note that the NULL case is later handled by the bus-specific caller, brcmf_usb_probe_cb() or brcmf_usb_reset_resume(), for example. Found by a modified version of syzkaller. UBSAN: shift-out-of-bounds in drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c shift exponent 151055786 is too large for 64-bit type 'long unsigned int' CPU: 0 PID: 1885 Comm: kworker/0:2 Tainted: G O 5.14.0+ #132 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Workqueue: usb_hub_wq hub_event Call Trace: dump_stack_lvl+0x57/0x7d ubsan_epilogue+0x5/0x40 __ubsan_handle_shift_out_of_bounds.cold+0x53/0xdb ? lock_chain_count+0x20/0x20 brcmf_fw_alloc_request.cold+0x19/0x3ea ? brcmf_fw_get_firmwares+0x250/0x250 ? brcmf_usb_ioctl_resp_wait+0x1a7/0x1f0 brcmf_usb_get_fwname+0x114/0x1a0 ? brcmf_usb_reset_resume+0x120/0x120 ? number+0x6c4/0x9a0 brcmf_c_process_clm_blob+0x168/0x590 ? put_dec+0x90/0x90 ? enable_ptr_key_workfn+0x20/0x20 ? brcmf_common_pd_remove+0x50/0x50 ? rcu_read_lock_sched_held+0xa1/0xd0 brcmf_c_preinit_dcmds+0x673/0xc40 ? brcmf_c_set_joinpref_default+0x100/0x100 ? rcu_read_lock_sched_held+0xa1/0xd0 ? rcu_read_lock_bh_held+0xb0/0xb0 ? lock_acquire+0x19d/0x4e0 ? find_held_lock+0x2d/0x110 ? brcmf_usb_deq+0x1cc/0x260 ? mark_held_locks+0x9f/0xe0 ? lockdep_hardirqs_on_prepare+0x273/0x3e0 ? _raw_spin_unlock_irqrestore+0x47/0x50 ? trace_hardirqs_on+0x1c/0x120 ? brcmf_usb_deq+0x1a7/0x260 ? brcmf_usb_rx_fill_all+0x5a/0xf0 brcmf_attach+0x246/0xd40 ? wiphy_new_nm+0x1476/0x1d50 ? kmemdup+0x30/0x40 brcmf_usb_probe+0x12de/0x1690 ? brcmf_usbdev_qinit.constprop.0+0x470/0x470 usb_probe_interface+0x25f/0x710 really_probe+0x1be/0xa90 __driver_probe_device+0x2ab/0x460 ? usb_match_id.part.0+0x88/0xc0 driver_probe_device+0x49/0x120 __device_attach_driver+0x18a/0x250 ? driver_allows_async_probing+0x120/0x120 bus_for_each_drv+0x123/0x1a0 ? bus_rescan_devices+0x20/0x20 ? lockdep_hardirqs_on_prepare+0x273/0x3e0 ? trace_hardirqs_on+0x1c/0x120 __device_attach+0x207/0x330 ? device_bind_driver+0xb0/0xb0 ? kobject_uevent_env+0x230/0x12c0 bus_probe_device+0x1a2/0x260 device_add+0xa61/0x1ce0 ? __mutex_unlock_slowpath+0xe7/0x660 ? __fw_devlink_link_to_suppliers+0x550/0x550 usb_set_configuration+0x984/0x1770 ? kernfs_create_link+0x175/0x230 usb_generic_driver_probe+0x69/0x90 usb_probe_device+0x9c/0x220 really_probe+0x1be/0xa90 __driver_probe_device+0x2ab/0x460 driver_probe_device+0x49/0x120 __device_attach_driver+0x18a/0x250 ? driver_allows_async_probing+0x120/0x120 bus_for_each_drv+0x123/0x1a0 ? bus_rescan_devices+0x20/0x20 ? lockdep_hardirqs_on_prepare+0x273/0x3e0 ? trace_hardirqs_on+0x1c/0x120 __device_attach+0x207/0x330 ? device_bind_driver+0xb0/0xb0 ? kobject_uevent_env+0x230/0x12c0 bus_probe_device+0x1a2/0x260 device_add+0xa61/0x1ce0 ? __fw_devlink_link_to_suppliers+0x550/0x550 usb_new_device.cold+0x463/0xf66 ? hub_disconnect+0x400/0x400 ? _raw_spin_unlock_irq+0x24/0x30 hub_event+0x10d5/0x3330 ? hub_port_debounce+0x280/0x280 ? __lock_acquire+0x1671/0x5790 ? wq_calc_node_cpumask+0x170/0x2a0 ? lock_release+0x640/0x640 ? rcu_read_lock_sched_held+0xa1/0xd0 ? rcu_read_lock_bh_held+0xb0/0xb0 ? lockdep_hardirqs_on_prepare+0x273/0x3e0 process_one_work+0x873/0x13e0 ? lock_release+0x640/0x640 ? pwq_dec_nr_in_flight+0x320/0x320 ? rwlock_bug.part.0+0x90/0x90 worker_thread+0x8b/0xd10 ? __kthread_parkme+0xd9/0x1d0 ? pr ---truncated---

In the Linux kernel, the following vulnerability has been resolved: hwmon: (gpio-fan) Fix array out of bounds access The driver does not check if the cooling state passed to gpio_fan_set_cur_state() exceeds the maximum cooling state as stored in fan_data->num_speeds. Since the cooling state is later used as an array index in set_fan_speed(), an array out of bounds access can occur. This can be exploited by setting the state of the thermal cooling device to arbitrary values, causing for example a kernel oops when unavailable memory is accessed this way. Example kernel oops: [ 807.987276] Unable to handle kernel paging request at virtual address ffffff80d0588064 [ 807.987369] Mem abort info: [ 807.987398] ESR = 0x96000005 [ 807.987428] EC = 0x25: DABT (current EL), IL = 32 bits [ 807.987477] SET = 0, FnV = 0 [ 807.987507] EA = 0, S1PTW = 0 [ 807.987536] FSC = 0x05: level 1 translation fault [ 807.987570] Data abort info: [ 807.987763] ISV = 0, ISS = 0x00000005 [ 807.987801] CM = 0, WnR = 0 [ 807.987832] swapper pgtable: 4k pages, 39-bit VAs, pgdp=0000000001165000 [ 807.987872] [ffffff80d0588064] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 807.987961] Internal error: Oops: 96000005 [#1] PREEMPT SMP [ 807.987992] Modules linked in: cmac algif_hash aes_arm64 algif_skcipher af_alg bnep hci_uart btbcm bluetooth ecdh_generic ecc 8021q garp stp llc snd_soc_hdmi_codec brcmfmac vc4 brcmutil cec drm_kms_helper snd_soc_core cfg80211 snd_compress bcm2835_codec(C) snd_pcm_dmaengine syscopyarea bcm2835_isp(C) bcm2835_v4l2(C) sysfillrect v4l2_mem2mem bcm2835_mmal_vchiq(C) raspberrypi_hwmon sysimgblt videobuf2_dma_contig videobuf2_vmalloc fb_sys_fops videobuf2_memops rfkill videobuf2_v4l2 videobuf2_common i2c_bcm2835 snd_bcm2835(C) videodev snd_pcm snd_timer snd mc vc_sm_cma(C) gpio_fan uio_pdrv_genirq uio drm fuse drm_panel_orientation_quirks backlight ip_tables x_tables ipv6 [ 807.988508] CPU: 0 PID: 1321 Comm: bash Tainted: G C 5.15.56-v8+ #1575 [ 807.988548] Hardware name: Raspberry Pi 3 Model B Rev 1.2 (DT) [ 807.988574] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 807.988608] pc : set_fan_speed.part.5+0x34/0x80 [gpio_fan] [ 807.988654] lr : gpio_fan_set_cur_state+0x34/0x50 [gpio_fan] [ 807.988691] sp : ffffffc008cf3bd0 [ 807.988710] x29: ffffffc008cf3bd0 x28: ffffff80019edac0 x27: 0000000000000000 [ 807.988762] x26: 0000000000000000 x25: 0000000000000000 x24: ffffff800747c920 [ 807.988787] x23: 000000000000000a x22: ffffff800369f000 x21: 000000001999997c [ 807.988854] x20: ffffff800369f2e8 x19: ffffff8002ae8080 x18: 0000000000000000 [ 807.988877] x17: 0000000000000000 x16: 0000000000000000 x15: 000000559e271b70 [ 807.988938] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 [ 807.988960] x11: 0000000000000000 x10: ffffffc008cf3c20 x9 : ffffffcfb60c741c [ 807.989018] x8 : 000000000000000a x7 : 00000000ffffffc9 x6 : 0000000000000009 [ 807.989040] x5 : 000000000000002a x4 : 0000000000000000 x3 : ffffff800369f2e8 [ 807.989062] x2 : 000000000000e780 x1 : 0000000000000001 x0 : ffffff80d0588060 [ 807.989084] Call trace: [ 807.989091] set_fan_speed.part.5+0x34/0x80 [gpio_fan] [ 807.989113] gpio_fan_set_cur_state+0x34/0x50 [gpio_fan] [ 807.989199] cur_state_store+0x84/0xd0 [ 807.989221] dev_attr_store+0x20/0x38 [ 807.989262] sysfs_kf_write+0x4c/0x60 [ 807.989282] kernfs_fop_write_iter+0x130/0x1c0 [ 807.989298] new_sync_write+0x10c/0x190 [ 807.989315] vfs_write+0x254/0x378 [ 807.989362] ksys_write+0x70/0xf8 [ 807.989379] __arm64_sys_write+0x24/0x30 [ 807.989424] invoke_syscall+0x4c/0x110 [ 807.989442] el0_svc_common.constprop.3+0xfc/0x120 [ 807.989458] do_el0_svc+0x2c/0x90 [ 807.989473] el0_svc+0x24/0x60 [ 807.989544] el0t_64_sync_handler+0x90/0xb8 [ 807.989558] el0t_64_sync+0x1a0/0x1a4 [ 807.989579] Code: b9403801 f9402800 7100003f 8b35cc00 (b9400416) [ 807.989627] ---[ end t ---truncated---

In the Linux kernel, the following vulnerability has been resolved: riscv: fix reserved memory setup Currently, RISC-V sets up reserved memory using the "early" copy of the device tree. As a result, when trying to get a reserved memory region using of_reserved_mem_lookup(), the pointer to reserved memory regions is using the early, pre-virtual-memory address which causes a kernel panic when trying to use the buffer's name: Unable to handle kernel paging request at virtual address 00000000401c31ac Oops [#1] Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 6.0.0-rc1-00001-g0d9d6953d834 #1 Hardware name: Microchip PolarFire-SoC Icicle Kit (DT) epc : string+0x4a/0xea ra : vsnprintf+0x1e4/0x336 epc : ffffffff80335ea0 ra : ffffffff80338936 sp : ffffffff81203be0 gp : ffffffff812e0a98 tp : ffffffff8120de40 t0 : 0000000000000000 t1 : ffffffff81203e28 t2 : 7265736572203a46 s0 : ffffffff81203c20 s1 : ffffffff81203e28 a0 : ffffffff81203d22 a1 : 0000000000000000 a2 : ffffffff81203d08 a3 : 0000000081203d21 a4 : ffffffffffffffff a5 : 00000000401c31ac a6 : ffff0a00ffffff04 a7 : ffffffffffffffff s2 : ffffffff81203d08 s3 : ffffffff81203d00 s4 : 0000000000000008 s5 : ffffffff000000ff s6 : 0000000000ffffff s7 : 00000000ffffff00 s8 : ffffffff80d9821a s9 : ffffffff81203d22 s10: 0000000000000002 s11: ffffffff80d9821c t3 : ffffffff812f3617 t4 : ffffffff812f3617 t5 : ffffffff812f3618 t6 : ffffffff81203d08 status: 0000000200000100 badaddr: 00000000401c31ac cause: 000000000000000d [<ffffffff80338936>] vsnprintf+0x1e4/0x336 [<ffffffff80055ae2>] vprintk_store+0xf6/0x344 [<ffffffff80055d86>] vprintk_emit+0x56/0x192 [<ffffffff80055ed8>] vprintk_default+0x16/0x1e [<ffffffff800563d2>] vprintk+0x72/0x80 [<ffffffff806813b2>] _printk+0x36/0x50 [<ffffffff8068af48>] print_reserved_mem+0x1c/0x24 [<ffffffff808057ec>] paging_init+0x528/0x5bc [<ffffffff808031ae>] setup_arch+0xd0/0x592 [<ffffffff8080070e>] start_kernel+0x82/0x73c early_init_fdt_scan_reserved_mem() takes no arguments as it operates on initial_boot_params, which is populated by early_init_dt_verify(). On RISC-V, early_init_dt_verify() is called twice. Once, directly, in setup_arch() if CONFIG_BUILTIN_DTB is not enabled and once indirectly, very early in the boot process, by parse_dtb() when it calls early_init_dt_scan_nodes(). This first call uses dtb_early_va to set initial_boot_params, which is not usable later in the boot process when early_init_fdt_scan_reserved_mem() is called. On arm64 for example, the corresponding call to early_init_dt_scan_nodes() uses fixmap addresses and doesn't suffer the same fate. Move early_init_fdt_scan_reserved_mem() further along the boot sequence, after the direct call to early_init_dt_verify() in setup_arch() so that the names use the correct virtual memory addresses. The above supposed that CONFIG_BUILTIN_DTB was not set, but should work equally in the case where it is - unflatted_and_copy_device_tree() also updates initial_boot_params.

In the Linux kernel, the following vulnerability has been resolved: bpf: Don't use tnum_range on array range checking for poke descriptors Hsin-Wei reported a KASAN splat triggered by their BPF runtime fuzzer which is based on a customized syzkaller: BUG: KASAN: slab-out-of-bounds in bpf_int_jit_compile+0x1257/0x13f0 Read of size 8 at addr ffff888004e90b58 by task syz-executor.0/1489 CPU: 1 PID: 1489 Comm: syz-executor.0 Not tainted 5.19.0 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x9c/0xc9 print_address_description.constprop.0+0x1f/0x1f0 ? bpf_int_jit_compile+0x1257/0x13f0 kasan_report.cold+0xeb/0x197 ? kvmalloc_node+0x170/0x200 ? bpf_int_jit_compile+0x1257/0x13f0 bpf_int_jit_compile+0x1257/0x13f0 ? arch_prepare_bpf_dispatcher+0xd0/0xd0 ? rcu_read_lock_sched_held+0x43/0x70 bpf_prog_select_runtime+0x3e8/0x640 ? bpf_obj_name_cpy+0x149/0x1b0 bpf_prog_load+0x102f/0x2220 ? __bpf_prog_put.constprop.0+0x220/0x220 ? find_held_lock+0x2c/0x110 ? __might_fault+0xd6/0x180 ? lock_downgrade+0x6e0/0x6e0 ? lock_is_held_type+0xa6/0x120 ? __might_fault+0x147/0x180 __sys_bpf+0x137b/0x6070 ? bpf_perf_link_attach+0x530/0x530 ? new_sync_read+0x600/0x600 ? __fget_files+0x255/0x450 ? lock_downgrade+0x6e0/0x6e0 ? fput+0x30/0x1a0 ? ksys_write+0x1a8/0x260 __x64_sys_bpf+0x7a/0xc0 ? syscall_enter_from_user_mode+0x21/0x70 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f917c4e2c2d The problem here is that a range of tnum_range(0, map->max_entries - 1) has limited ability to represent the concrete tight range with the tnum as the set of resulting states from value + mask can result in a superset of the actual intended range, and as such a tnum_in(range, reg->var_off) check may yield true when it shouldn't, for example tnum_range(0, 2) would result in 00XX -> v = 0000, m = 0011 such that the intended set of {0, 1, 2} is here represented by a less precise superset of {0, 1, 2, 3}. As the register is known const scalar, really just use the concrete reg->var_off.value for the upper index check.

In the Linux kernel, the following vulnerability has been resolved: md-raid10: fix KASAN warning There's a KASAN warning in raid10_remove_disk when running the lvm test lvconvert-raid-reshape.sh. We fix this warning by verifying that the value "number" is valid. BUG: KASAN: slab-out-of-bounds in raid10_remove_disk+0x61/0x2a0 [raid10] Read of size 8 at addr ffff889108f3d300 by task mdX_raid10/124682 CPU: 3 PID: 124682 Comm: mdX_raid10 Not tainted 5.19.0-rc6 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x34/0x44 print_report.cold+0x45/0x57a ? __lock_text_start+0x18/0x18 ? raid10_remove_disk+0x61/0x2a0 [raid10] kasan_report+0xa8/0xe0 ? raid10_remove_disk+0x61/0x2a0 [raid10] raid10_remove_disk+0x61/0x2a0 [raid10] Buffer I/O error on dev dm-76, logical block 15344, async page read ? __mutex_unlock_slowpath.constprop.0+0x1e0/0x1e0 remove_and_add_spares+0x367/0x8a0 [md_mod] ? super_written+0x1c0/0x1c0 [md_mod] ? mutex_trylock+0xac/0x120 ? _raw_spin_lock+0x72/0xc0 ? _raw_spin_lock_bh+0xc0/0xc0 md_check_recovery+0x848/0x960 [md_mod] raid10d+0xcf/0x3360 [raid10] ? sched_clock_cpu+0x185/0x1a0 ? rb_erase+0x4d4/0x620 ? var_wake_function+0xe0/0xe0 ? psi_group_change+0x411/0x500 ? preempt_count_sub+0xf/0xc0 ? _raw_spin_lock_irqsave+0x78/0xc0 ? __lock_text_start+0x18/0x18 ? raid10_sync_request+0x36c0/0x36c0 [raid10] ? preempt_count_sub+0xf/0xc0 ? _raw_spin_unlock_irqrestore+0x19/0x40 ? del_timer_sync+0xa9/0x100 ? try_to_del_timer_sync+0xc0/0xc0 ? _raw_spin_lock_irqsave+0x78/0xc0 ? __lock_text_start+0x18/0x18 ? _raw_spin_unlock_irq+0x11/0x24 ? __list_del_entry_valid+0x68/0xa0 ? finish_wait+0xa3/0x100 md_thread+0x161/0x260 [md_mod] ? unregister_md_personality+0xa0/0xa0 [md_mod] ? _raw_spin_lock_irqsave+0x78/0xc0 ? prepare_to_wait_event+0x2c0/0x2c0 ? unregister_md_personality+0xa0/0xa0 [md_mod] kthread+0x148/0x180 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 </TASK> Allocated by task 124495: kasan_save_stack+0x1e/0x40 __kasan_kmalloc+0x80/0xa0 setup_conf+0x140/0x5c0 [raid10] raid10_run+0x4cd/0x740 [raid10] md_run+0x6f9/0x1300 [md_mod] raid_ctr+0x2531/0x4ac0 [dm_raid] dm_table_add_target+0x2b0/0x620 [dm_mod] table_load+0x1c8/0x400 [dm_mod] ctl_ioctl+0x29e/0x560 [dm_mod] dm_compat_ctl_ioctl+0x7/0x20 [dm_mod] __do_compat_sys_ioctl+0xfa/0x160 do_syscall_64+0x90/0xc0 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Last potentially related work creation: kasan_save_stack+0x1e/0x40 __kasan_record_aux_stack+0x9e/0xc0 kvfree_call_rcu+0x84/0x480 timerfd_release+0x82/0x140 L __fput+0xfa/0x400 task_work_run+0x80/0xc0 exit_to_user_mode_prepare+0x155/0x160 syscall_exit_to_user_mode+0x12/0x40 do_syscall_64+0x42/0xc0 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Second to last potentially related work creation: kasan_save_stack+0x1e/0x40 __kasan_record_aux_stack+0x9e/0xc0 kvfree_call_rcu+0x84/0x480 timerfd_release+0x82/0x140 __fput+0xfa/0x400 task_work_run+0x80/0xc0 exit_to_user_mode_prepare+0x155/0x160 syscall_exit_to_user_mode+0x12/0x40 do_syscall_64+0x42/0xc0 entry_SYSCALL_64_after_hwframe+0x46/0xb0 The buggy address belongs to the object at ffff889108f3d200 which belongs to the cache kmalloc-256 of size 256 The buggy address is located 0 bytes to the right of 256-byte region [ffff889108f3d200, ffff889108f3d300) The buggy address belongs to the physical page: page:000000007ef2a34c refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1108f3c head:000000007ef2a34c order:2 compound_mapcount:0 compound_pincount:0 flags: 0x4000000000010200(slab|head|zone=2) raw: 4000000000010200 0000000000000000 dead000000000001 ffff889100042b40 raw: 0000000000000000 0000000080200020 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff889108f3d200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff889108f3d280: 00 00 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: bpf, cgroup: Fix kernel BUG in purge_effective_progs Syzkaller reported a triggered kernel BUG as follows: ------------[ cut here ]------------ kernel BUG at kernel/bpf/cgroup.c:925! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 1 PID: 194 Comm: detach Not tainted 5.19.0-14184-g69dac8e431af #8 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:__cgroup_bpf_detach+0x1f2/0x2a0 Code: 00 e8 92 60 30 00 84 c0 75 d8 4c 89 e0 31 f6 85 f6 74 19 42 f6 84 28 48 05 00 00 02 75 0e 48 8b 80 c0 00 00 00 48 85 c0 75 e5 <0f> 0b 48 8b 0c5 RSP: 0018:ffffc9000055bdb0 EFLAGS: 00000246 RAX: 0000000000000000 RBX: ffff888100ec0800 RCX: ffffc900000f1000 RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff888100ec4578 RBP: 0000000000000000 R08: ffff888100ec0800 R09: 0000000000000040 R10: 0000000000000000 R11: 0000000000000000 R12: ffff888100ec4000 R13: 000000000000000d R14: ffffc90000199000 R15: ffff888100effb00 FS: 00007f68213d2b80(0000) GS:ffff88813bc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055f74a0e5850 CR3: 0000000102836000 CR4: 00000000000006e0 Call Trace: <TASK> cgroup_bpf_prog_detach+0xcc/0x100 __sys_bpf+0x2273/0x2a00 __x64_sys_bpf+0x17/0x20 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f68214dbcb9 Code: 08 44 89 e0 5b 41 5c c3 66 0f 1f 84 00 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff8 RSP: 002b:00007ffeb487db68 EFLAGS: 00000246 ORIG_RAX: 0000000000000141 RAX: ffffffffffffffda RBX: 000000000000000b RCX: 00007f68214dbcb9 RDX: 0000000000000090 RSI: 00007ffeb487db70 RDI: 0000000000000009 RBP: 0000000000000003 R08: 0000000000000012 R09: 0000000b00000003 R10: 00007ffeb487db70 R11: 0000000000000246 R12: 00007ffeb487dc20 R13: 0000000000000004 R14: 0000000000000001 R15: 000055f74a1011b0 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- Repetition steps: For the following cgroup tree, root | cg1 | cg2 1. attach prog2 to cg2, and then attach prog1 to cg1, both bpf progs attach type is NONE or OVERRIDE. 2. write 1 to /proc/thread-self/fail-nth for failslab. 3. detach prog1 for cg1, and then kernel BUG occur. Failslab injection will cause kmalloc fail and fall back to purge_effective_progs. The problem is that cg2 have attached another prog, so when go through cg2 layer, iteration will add pos to 1, and subsequent operations will be skipped by the following condition, and cg will meet NULL in the end. `if (pos && !(cg->bpf.flags[atype] & BPF_F_ALLOW_MULTI))` The NULL cg means no link or prog match, this is as expected, and it's not a bug. So here just skip the no match situation.

In the Linux kernel, the following vulnerability has been resolved: ipv6: addrlabel: fix infoleak when sending struct ifaddrlblmsg to network When copying a `struct ifaddrlblmsg` to the network, __ifal_reserved remained uninitialized, resulting in a 1-byte infoleak: BUG: KMSAN: kernel-network-infoleak in __netdev_start_xmit ./include/linux/netdevice.h:4841 __netdev_start_xmit ./include/linux/netdevice.h:4841 netdev_start_xmit ./include/linux/netdevice.h:4857 xmit_one net/core/dev.c:3590 dev_hard_start_xmit+0x1dc/0x800 net/core/dev.c:3606 __dev_queue_xmit+0x17e8/0x4350 net/core/dev.c:4256 dev_queue_xmit ./include/linux/netdevice.h:3009 __netlink_deliver_tap_skb net/netlink/af_netlink.c:307 __netlink_deliver_tap+0x728/0xad0 net/netlink/af_netlink.c:325 netlink_deliver_tap net/netlink/af_netlink.c:338 __netlink_sendskb net/netlink/af_netlink.c:1263 netlink_sendskb+0x1d9/0x200 net/netlink/af_netlink.c:1272 netlink_unicast+0x56d/0xf50 net/netlink/af_netlink.c:1360 nlmsg_unicast ./include/net/netlink.h:1061 rtnl_unicast+0x5a/0x80 net/core/rtnetlink.c:758 ip6addrlbl_get+0xfad/0x10f0 net/ipv6/addrlabel.c:628 rtnetlink_rcv_msg+0xb33/0x1570 net/core/rtnetlink.c:6082 ... Uninit was created at: slab_post_alloc_hook+0x118/0xb00 mm/slab.h:742 slab_alloc_node mm/slub.c:3398 __kmem_cache_alloc_node+0x4f2/0x930 mm/slub.c:3437 __do_kmalloc_node mm/slab_common.c:954 __kmalloc_node_track_caller+0x117/0x3d0 mm/slab_common.c:975 kmalloc_reserve net/core/skbuff.c:437 __alloc_skb+0x27a/0xab0 net/core/skbuff.c:509 alloc_skb ./include/linux/skbuff.h:1267 nlmsg_new ./include/net/netlink.h:964 ip6addrlbl_get+0x490/0x10f0 net/ipv6/addrlabel.c:608 rtnetlink_rcv_msg+0xb33/0x1570 net/core/rtnetlink.c:6082 netlink_rcv_skb+0x299/0x550 net/netlink/af_netlink.c:2540 rtnetlink_rcv+0x26/0x30 net/core/rtnetlink.c:6109 netlink_unicast_kernel net/netlink/af_netlink.c:1319 netlink_unicast+0x9ab/0xf50 net/netlink/af_netlink.c:1345 netlink_sendmsg+0xebc/0x10f0 net/netlink/af_netlink.c:1921 ... This patch ensures that the reserved field is always initialized.

In the Linux kernel, the following vulnerability has been resolved: bpf: Propagate error from htab_lock_bucket() to userspace In __htab_map_lookup_and_delete_batch() if htab_lock_bucket() returns -EBUSY, it will go to next bucket. Going to next bucket may not only skip the elements in current bucket silently, but also incur out-of-bound memory access or expose kernel memory to userspace if current bucket_cnt is greater than bucket_size or zero. Fixing it by stopping batch operation and returning -EBUSY when htab_lock_bucket() fails, and the application can retry or skip the busy batch as needed.

In the Linux kernel, the following vulnerability has been resolved: cpufreq: qcom: fix writes in read-only memory region This commit fixes a kernel oops because of a write in some read-only memory: [ 9.068287] Unable to handle kernel write to read-only memory at virtual address ffff800009240ad8 ..snip.. [ 9.138790] Internal error: Oops: 9600004f [#1] PREEMPT SMP ..snip.. [ 9.269161] Call trace: [ 9.276271] __memcpy+0x5c/0x230 [ 9.278531] snprintf+0x58/0x80 [ 9.282002] qcom_cpufreq_msm8939_name_version+0xb4/0x190 [ 9.284869] qcom_cpufreq_probe+0xc8/0x39c ..snip.. The following line defines a pointer that point to a char buffer stored in read-only memory: char *pvs_name = "speedXX-pvsXX-vXX"; This pointer is meant to hold a template "speedXX-pvsXX-vXX" where the XX values get overridden by the qcom_cpufreq_krait_name_version function. Since the template is actually stored in read-only memory, when the function executes the following call we get an oops: snprintf(*pvs_name, sizeof("speedXX-pvsXX-vXX"), "speed%d-pvs%d-v%d", speed, pvs, pvs_ver); To fix this issue, we instead store the template name onto the stack by using the following syntax: char pvs_name_buffer[] = "speedXX-pvsXX-vXX"; Because the `pvs_name` needs to be able to be assigned to NULL, the template buffer is stored in the pvs_name_buffer and not under the pvs_name variable.

In the Linux kernel, the following vulnerability has been resolved: drm/fb-helper: Fix out-of-bounds access Clip memory range to screen-buffer size to avoid out-of-bounds access in fbdev deferred I/O's damage handling. Fbdev's deferred I/O can only track pages. From the range of pages, the damage handler computes the clipping rectangle for the display update. If the fbdev screen buffer ends near the beginning of a page, that page could contain more scanlines. The damage handler would then track these non-existing scanlines as dirty and provoke an out-of-bounds access during the screen update. Hence, clip the maximum memory range to the size of the screen buffer. While at it, rename the variables min/max to min_off/max_off in drm_fb_helper_deferred_io(). This avoids confusion with the macros of the same name.

In the Linux kernel, the following vulnerability has been resolved: fs: jfs: fix shift-out-of-bounds in dbDiscardAG This should be applied to most URSAN bugs found recently by syzbot, by guarding the dbMount. As syzbot feeding rubbish into the bmap descriptor.

In the Linux kernel, the following vulnerability has been resolved: sched, cpuset: Fix dl_cpu_busy() panic due to empty cs->cpus_allowed With cgroup v2, the cpuset's cpus_allowed mask can be empty indicating that the cpuset will just use the effective CPUs of its parent. So cpuset_can_attach() can call task_can_attach() with an empty mask. This can lead to cpumask_any_and() returns nr_cpu_ids causing the call to dl_bw_of() to crash due to percpu value access of an out of bound CPU value. For example: [80468.182258] BUG: unable to handle page fault for address: ffffffff8b6648b0 : [80468.191019] RIP: 0010:dl_cpu_busy+0x30/0x2b0 : [80468.207946] Call Trace: [80468.208947] cpuset_can_attach+0xa0/0x140 [80468.209953] cgroup_migrate_execute+0x8c/0x490 [80468.210931] cgroup_update_dfl_csses+0x254/0x270 [80468.211898] cgroup_subtree_control_write+0x322/0x400 [80468.212854] kernfs_fop_write_iter+0x11c/0x1b0 [80468.213777] new_sync_write+0x11f/0x1b0 [80468.214689] vfs_write+0x1eb/0x280 [80468.215592] ksys_write+0x5f/0xe0 [80468.216463] do_syscall_64+0x5c/0x80 [80468.224287] entry_SYSCALL_64_after_hwframe+0x44/0xae Fix that by using effective_cpus instead. For cgroup v1, effective_cpus is the same as cpus_allowed. For v2, effective_cpus is the real cpumask to be used by tasks within the cpuset anyway. Also update task_can_attach()'s 2nd argument name to cs_effective_cpus to reflect the change. In addition, a check is added to task_can_attach() to guard against the possibility that cpumask_any_and() may return a value >= nr_cpu_ids.

In the Linux kernel, the following vulnerability has been resolved: KVM: x86: smm: number of GPRs in the SMRAM image depends on the image format On 64 bit host, if the guest doesn't have X86_FEATURE_LM, KVM will access 16 gprs to 32-bit smram image, causing out-ouf-bound ram access. On 32 bit host, the rsm_load_state_64/enter_smm_save_state_64 is compiled out, thus access overflow can't happen.

In the Linux kernel, the following vulnerability has been resolved: module: fix [e_shstrndx].sh_size=0 OOB access It is trivial to craft a module to trigger OOB access in this line: if (info->secstrings[strhdr->sh_size - 1] != '\0') { BUG: unable to handle page fault for address: ffffc90000aa0fff PGD 100000067 P4D 100000067 PUD 100066067 PMD 10436f067 PTE 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 7 PID: 1215 Comm: insmod Not tainted 5.18.0-rc5-00007-g9bf578647087-dirty #10 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-4.fc34 04/01/2014 RIP: 0010:load_module+0x19b/0x2391 [rebased patch onto modules-next]

In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: va-macro: fix accessing array out of bounds for enum type Accessing enums using integer would result in array out of bounds access on platforms like aarch64 where sizeof(long) is 8 compared to enum size which is 4 bytes.

In the Linux kernel, the following vulnerability has been resolved: iio: health: afe4403: Fix oob read in afe4403_read_raw KASAN report out-of-bounds read as follows: BUG: KASAN: global-out-of-bounds in afe4403_read_raw+0x42e/0x4c0 Read of size 4 at addr ffffffffc02ac638 by task cat/279 Call Trace: afe4403_read_raw iio_read_channel_info dev_attr_show The buggy address belongs to the variable: afe4403_channel_leds+0x18/0xffffffffffffe9e0 This issue can be reproduced by singe command: $ cat /sys/bus/spi/devices/spi0.0/iio\:device0/in_intensity6_raw The array size of afe4403_channel_leds is less than channels, so access with chan->address cause OOB read in afe4403_read_raw. Fix it by moving access before use it.

In the Linux kernel, the following vulnerability has been resolved: uaccess: fix integer overflow on access_ok() Three architectures check the end of a user access against the address limit without taking a possible overflow into account. Passing a negative length or another overflow in here returns success when it should not. Use the most common correct implementation here, which optimizes for a constant 'size' argument, and turns the common case into a single comparison.

In the Linux kernel, the following vulnerability has been resolved: dm raid: fix accesses beyond end of raid member array On dm-raid table load (using raid_ctr), dm-raid allocates an array rs->devs[rs->raid_disks] for the raid device members. rs->raid_disks is defined by the number of raid metadata and image tupples passed into the target's constructor. In the case of RAID layout changes being requested, that number can be different from the current number of members for existing raid sets as defined in their superblocks. Example RAID layout changes include: - raid1 legs being added/removed - raid4/5/6/10 number of stripes changed (stripe reshaping) - takeover to higher raid level (e.g. raid5 -> raid6) When accessing array members, rs->raid_disks must be used in control loops instead of the potentially larger value in rs->md.raid_disks. Otherwise it will cause memory access beyond the end of the rs->devs array. Fix this by changing code that is prone to out-of-bounds access. Also fix validate_raid_redundancy() to validate all devices that are added. Also, use braces to help clean up raid_iterate_devices(). The out-of-bounds memory accesses was discovered using KASAN. This commit was verified to pass all LVM2 RAID tests (with KASAN enabled).

In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc3-topology: Correct get_control_data for non bytes payload It is possible to craft a topology where sof_get_control_data() would do out of bounds access because it expects that it is only called when the payload is bytes type. Confusingly it also handles other types of controls, but the payload parsing implementation is only valid for bytes. Fix the code to count the non bytes controls and instead of storing a pointer to sof_abi_hdr in sof_widget_data (which is only valid for bytes), store the pointer to the data itself and add a new member to save the size of the data. In case of non bytes controls we store the pointer to the chanv itself, which is just an array of values at the end. In case of bytes control, drop the wrong cdata->data (wdata[i].pdata) check against NULL since it is incorrect and invalid in this context. The data is pointing to the end of cdata struct, so it should never be null.

In the Linux kernel, the following vulnerability has been resolved: exfat: check if cluster num is valid Syzbot reported slab-out-of-bounds read in exfat_clear_bitmap. This was triggered by reproducer calling truncute with size 0, which causes the following trace: BUG: KASAN: slab-out-of-bounds in exfat_clear_bitmap+0x147/0x490 fs/exfat/balloc.c:174 Read of size 8 at addr ffff888115aa9508 by task syz-executor251/365 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack_lvl+0x1e2/0x24b lib/dump_stack.c:118 print_address_description+0x81/0x3c0 mm/kasan/report.c:233 __kasan_report mm/kasan/report.c:419 [inline] kasan_report+0x1a4/0x1f0 mm/kasan/report.c:436 __asan_report_load8_noabort+0x14/0x20 mm/kasan/report_generic.c:309 exfat_clear_bitmap+0x147/0x490 fs/exfat/balloc.c:174 exfat_free_cluster+0x25a/0x4a0 fs/exfat/fatent.c:181 __exfat_truncate+0x99e/0xe00 fs/exfat/file.c:217 exfat_truncate+0x11b/0x4f0 fs/exfat/file.c:243 exfat_setattr+0xa03/0xd40 fs/exfat/file.c:339 notify_change+0xb76/0xe10 fs/attr.c:336 do_truncate+0x1ea/0x2d0 fs/open.c:65 Move the is_valid_cluster() helper from fatent.c to a common header to make it reusable in other *.c files. And add is_valid_cluster() to validate if cluster number is within valid range in exfat_clear_bitmap() and exfat_set_bitmap().

In the Linux kernel, the following vulnerability has been resolved: virtio_net: fix xdp_rxq_info bug after suspend/resume The following sequence currently causes a driver bug warning when using virtio_net: # ip link set eth0 up # echo mem > /sys/power/state (or e.g. # rtcwake -s 10 -m mem) <resume> # ip link set eth0 down Missing register, driver bug WARNING: CPU: 0 PID: 375 at net/core/xdp.c:138 xdp_rxq_info_unreg+0x58/0x60 Call trace: xdp_rxq_info_unreg+0x58/0x60 virtnet_close+0x58/0xac __dev_close_many+0xac/0x140 __dev_change_flags+0xd8/0x210 dev_change_flags+0x24/0x64 do_setlink+0x230/0xdd0 ... This happens because virtnet_freeze() frees the receive_queue completely (including struct xdp_rxq_info) but does not call xdp_rxq_info_unreg(). Similarly, virtnet_restore() sets up the receive_queue again but does not call xdp_rxq_info_reg(). Actually, parts of virtnet_freeze_down() and virtnet_restore_up() are almost identical to virtnet_close() and virtnet_open(): only the calls to xdp_rxq_info_(un)reg() are missing. This means that we can fix this easily and avoid such problems in the future by just calling virtnet_close()/open() from the freeze/restore handlers. Aside from adding the missing xdp_rxq_info calls the only difference is that the refill work is only cancelled if netif_running(). However, this should not make any functional difference since the refill work should only be active if the network interface is actually up.

In the Linux kernel, the following vulnerability has been resolved: drm/dp: Fix OOB read when handling Post Cursor2 register The link_status array was not large enough to read the Adjust Request Post Cursor2 register, so remove the common helper function to avoid an OOB read, found with a -Warray-bounds build: drivers/gpu/drm/drm_dp_helper.c: In function 'drm_dp_get_adjust_request_post_cursor': drivers/gpu/drm/drm_dp_helper.c:59:27: error: array subscript 10 is outside array bounds of 'const u8[6]' {aka 'const unsigned char[6]'} [-Werror=array-bounds] 59 | return link_status[r - DP_LANE0_1_STATUS]; | ~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/drm_dp_helper.c:147:51: note: while referencing 'link_status' 147 | u8 drm_dp_get_adjust_request_post_cursor(const u8 link_status[DP_LINK_STATUS_SIZE], | ~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Replace the only user of the helper with an open-coded fetch and decode, similar to drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c.

In the Linux kernel, the following vulnerability has been resolved: ipv4: Handle attempt to delete multipath route when fib_info contains an nh reference Gwangun Jung reported a slab-out-of-bounds access in fib_nh_match: fib_nh_match+0xf98/0x1130 linux-6.0-rc7/net/ipv4/fib_semantics.c:961 fib_table_delete+0x5f3/0xa40 linux-6.0-rc7/net/ipv4/fib_trie.c:1753 inet_rtm_delroute+0x2b3/0x380 linux-6.0-rc7/net/ipv4/fib_frontend.c:874 Separate nexthop objects are mutually exclusive with the legacy multipath spec. Fix fib_nh_match to return if the config for the to be deleted route contains a multipath spec while the fib_info is using a nexthop object.

In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: Check the count value of channel spec to prevent out-of-bounds reads This patch fixes slab-out-of-bounds reads in brcmfmac that occur in brcmf_construct_chaninfo() and brcmf_enable_bw40_2g() when the count value of channel specifications provided by the device is greater than the length of 'list->element[]', decided by the size of the 'list' allocated with kzalloc(). The patch adds checks that make the functions free the buffer and return -EINVAL if that is the case. Note that the negative return is handled by the caller, brcmf_setup_wiphybands() or brcmf_cfg80211_attach(). Found by a modified version of syzkaller. Crash Report from brcmf_construct_chaninfo(): ================================================================== BUG: KASAN: slab-out-of-bounds in brcmf_setup_wiphybands+0x1238/0x1430 Read of size 4 at addr ffff888115f24600 by task kworker/0:2/1896 CPU: 0 PID: 1896 Comm: kworker/0:2 Tainted: G W O 5.14.0+ #132 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Workqueue: usb_hub_wq hub_event Call Trace: dump_stack_lvl+0x57/0x7d print_address_description.constprop.0.cold+0x93/0x334 kasan_report.cold+0x83/0xdf brcmf_setup_wiphybands+0x1238/0x1430 brcmf_cfg80211_attach+0x2118/0x3fd0 brcmf_attach+0x389/0xd40 brcmf_usb_probe+0x12de/0x1690 usb_probe_interface+0x25f/0x710 really_probe+0x1be/0xa90 __driver_probe_device+0x2ab/0x460 driver_probe_device+0x49/0x120 __device_attach_driver+0x18a/0x250 bus_for_each_drv+0x123/0x1a0 __device_attach+0x207/0x330 bus_probe_device+0x1a2/0x260 device_add+0xa61/0x1ce0 usb_set_configuration+0x984/0x1770 usb_generic_driver_probe+0x69/0x90 usb_probe_device+0x9c/0x220 really_probe+0x1be/0xa90 __driver_probe_device+0x2ab/0x460 driver_probe_device+0x49/0x120 __device_attach_driver+0x18a/0x250 bus_for_each_drv+0x123/0x1a0 __device_attach+0x207/0x330 bus_probe_device+0x1a2/0x260 device_add+0xa61/0x1ce0 usb_new_device.cold+0x463/0xf66 hub_event+0x10d5/0x3330 process_one_work+0x873/0x13e0 worker_thread+0x8b/0xd10 kthread+0x379/0x450 ret_from_fork+0x1f/0x30 Allocated by task 1896: kasan_save_stack+0x1b/0x40 __kasan_kmalloc+0x7c/0x90 kmem_cache_alloc_trace+0x19e/0x330 brcmf_setup_wiphybands+0x290/0x1430 brcmf_cfg80211_attach+0x2118/0x3fd0 brcmf_attach+0x389/0xd40 brcmf_usb_probe+0x12de/0x1690 usb_probe_interface+0x25f/0x710 really_probe+0x1be/0xa90 __driver_probe_device+0x2ab/0x460 driver_probe_device+0x49/0x120 __device_attach_driver+0x18a/0x250 bus_for_each_drv+0x123/0x1a0 __device_attach+0x207/0x330 bus_probe_device+0x1a2/0x260 device_add+0xa61/0x1ce0 usb_set_configuration+0x984/0x1770 usb_generic_driver_probe+0x69/0x90 usb_probe_device+0x9c/0x220 really_probe+0x1be/0xa90 __driver_probe_device+0x2ab/0x460 driver_probe_device+0x49/0x120 __device_attach_driver+0x18a/0x250 bus_for_each_drv+0x123/0x1a0 __device_attach+0x207/0x330 bus_probe_device+0x1a2/0x260 device_add+0xa61/0x1ce0 usb_new_device.cold+0x463/0xf66 hub_event+0x10d5/0x3330 process_one_work+0x873/0x13e0 worker_thread+0x8b/0xd10 kthread+0x379/0x450 ret_from_fork+0x1f/0x30 The buggy address belongs to the object at ffff888115f24000 which belongs to the cache kmalloc-2k of size 2048 The buggy address is located 1536 bytes inside of 2048-byte region [ffff888115f24000, ffff888115f24800) Memory state around the buggy address: ffff888115f24500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff888115f24580: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff888115f24600: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff888115f24680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff888115f24700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ================================================================== Crash Report from brcmf_enable_bw40_2g(): ========== ---truncated---

In the Linux kernel, the following vulnerability has been resolved: iio: adc: mp2629: fix potential array out of bound access Add sentinel at end of maps to avoid potential array out of bound access in iio core.

In the Linux kernel, the following vulnerability has been resolved: software node: Correct a OOB check in software_node_get_reference_args() software_node_get_reference_args() wants to get @index-th element, so the property value requires at least '(index + 1) * sizeof(*ref)' bytes but that can not be guaranteed by current OOB check, and may cause OOB for malformed property. Fix by using as OOB check '((index + 1) * sizeof(*ref) > prop->length)'.

In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: rx-macro: fix accessing array out of bounds for enum type Accessing enums using integer would result in array out of bounds access on platforms like aarch64 where sizeof(long) is 8 compared to enum size which is 4 bytes.

In the Linux kernel, the following vulnerability has been resolved: tracing: Fix wild-memory-access in register_synth_event() In register_synth_event(), if set_synth_event_print_fmt() failed, then both trace_remove_event_call() and unregister_trace_event() will be called, which means the trace_event_call will call __unregister_trace_event() twice. As the result, the second unregister will causes the wild-memory-access. register_synth_event set_synth_event_print_fmt failed trace_remove_event_call event_remove if call->event.funcs then __unregister_trace_event (first call) unregister_trace_event __unregister_trace_event (second call) Fix the bug by avoiding to call the second __unregister_trace_event() by checking if the first one is called. general protection fault, probably for non-canonical address 0xfbd59c0000000024: 0000 [#1] SMP KASAN PTI KASAN: maybe wild-memory-access in range [0xdead000000000120-0xdead000000000127] CPU: 0 PID: 3807 Comm: modprobe Not tainted 6.1.0-rc1-00186-g76f33a7eedb4 #299 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 RIP: 0010:unregister_trace_event+0x6e/0x280 Code: 00 fc ff df 4c 89 ea 48 c1 ea 03 80 3c 02 00 0f 85 0e 02 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b 63 08 4c 89 e2 48 c1 ea 03 <80> 3c 02 00 0f 85 e2 01 00 00 49 89 2c 24 48 85 ed 74 28 e8 7a 9b RSP: 0018:ffff88810413f370 EFLAGS: 00010a06 RAX: dffffc0000000000 RBX: ffff888105d050b0 RCX: 0000000000000000 RDX: 1bd5a00000000024 RSI: ffff888119e276e0 RDI: ffffffff835a8b20 RBP: dead000000000100 R08: 0000000000000000 R09: fffffbfff0913481 R10: ffffffff8489a407 R11: fffffbfff0913480 R12: dead000000000122 R13: ffff888105d050b8 R14: 0000000000000000 R15: ffff888105d05028 FS: 00007f7823e8d540(0000) GS:ffff888119e00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f7823e7ebec CR3: 000000010a058002 CR4: 0000000000330ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __create_synth_event+0x1e37/0x1eb0 create_or_delete_synth_event+0x110/0x250 synth_event_run_command+0x2f/0x110 test_gen_synth_cmd+0x170/0x2eb [synth_event_gen_test] synth_event_gen_test_init+0x76/0x9bc [synth_event_gen_test] do_one_initcall+0xdb/0x480 do_init_module+0x1cf/0x680 load_module+0x6a50/0x70a0 __do_sys_finit_module+0x12f/0x1c0 do_syscall_64+0x3f/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd

In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: rx-macro: fix accessing compander for aux AUX interpolator does not have compander, so check before accessing compander data for this. Without this checkan array of out bounds access will be made in comp_enabled[] array.

In the Linux kernel, the following vulnerability has been resolved: net: dsa: Avoid cross-chip syncing of VLAN filtering Changes to VLAN filtering are not applicable to cross-chip notifications. On a system like this: .-----. .-----. .-----. | sw1 +---+ sw2 +---+ sw3 | '-1-2-' '-1-2-' '-1-2-' Before this change, upon sw1p1 leaving a bridge, a call to dsa_port_vlan_filtering would also be made to sw2p1 and sw3p1. In this scenario: .---------. .-----. .-----. | sw1 +---+ sw2 +---+ sw3 | '-1-2-3-4-' '-1-2-' '-1-2-' When sw1p4 would leave a bridge, dsa_port_vlan_filtering would be called for sw2 and sw3 with a non-existing port - leading to array out-of-bounds accesses and crashes on mv88e6xxx.

In the Linux kernel, the following vulnerability has been resolved: HID: hid-thrustmaster: fix OOB read in thrustmaster_interrupts Syzbot reported an slab-out-of-bounds Read in thrustmaster_probe() bug. The root case is in missing validation check of actual number of endpoints. Code should not blindly access usb_host_interface::endpoint array, since it may contain less endpoints than code expects. Fix it by adding missing validaion check and print an error if number of endpoints do not match expected number

In the Linux kernel, the following vulnerability has been resolved: tty: serial: qcom-geni-serial: fix slab-out-of-bounds on RX FIFO buffer Driver's probe allocates memory for RX FIFO (port->rx_fifo) based on default RX FIFO depth, e.g. 16. Later during serial startup the qcom_geni_serial_port_setup() updates the RX FIFO depth (port->rx_fifo_depth) to match real device capabilities, e.g. to 32. The RX UART handle code will read "port->rx_fifo_depth" number of words into "port->rx_fifo" buffer, thus exceeding the bounds. This can be observed in certain configurations with Qualcomm Bluetooth HCI UART device and KASAN: Bluetooth: hci0: QCA Product ID :0x00000010 Bluetooth: hci0: QCA SOC Version :0x400a0200 Bluetooth: hci0: QCA ROM Version :0x00000200 Bluetooth: hci0: QCA Patch Version:0x00000d2b Bluetooth: hci0: QCA controller version 0x02000200 Bluetooth: hci0: QCA Downloading qca/htbtfw20.tlv bluetooth hci0: Direct firmware load for qca/htbtfw20.tlv failed with error -2 Bluetooth: hci0: QCA Failed to request file: qca/htbtfw20.tlv (-2) Bluetooth: hci0: QCA Failed to download patch (-2) ================================================================== BUG: KASAN: slab-out-of-bounds in handle_rx_uart+0xa8/0x18c Write of size 4 at addr ffff279347d578c0 by task swapper/0/0 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.1.0-rt5-00350-gb2450b7e00be-dirty #26 Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT) Call trace: dump_backtrace.part.0+0xe0/0xf0 show_stack+0x18/0x40 dump_stack_lvl+0x8c/0xb8 print_report+0x188/0x488 kasan_report+0xb4/0x100 __asan_store4+0x80/0xa4 handle_rx_uart+0xa8/0x18c qcom_geni_serial_handle_rx+0x84/0x9c qcom_geni_serial_isr+0x24c/0x760 __handle_irq_event_percpu+0x108/0x500 handle_irq_event+0x6c/0x110 handle_fasteoi_irq+0x138/0x2cc generic_handle_domain_irq+0x48/0x64 If the RX FIFO depth changes after probe, be sure to resize the buffer.