In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix mr leak in RESPST_ERR_RNR rxe_recheck_mr() will increase mr's ref_cnt, so we should call rxe_put(mr) to drop mr's ref_cnt in RESPST_ERR_RNR to avoid below warning: WARNING: CPU: 0 PID: 4156 at drivers/infiniband/sw/rxe/rxe_pool.c:259 __rxe_cleanup+0x1df/0x240 [rdma_rxe] ... Call Trace: rxe_dereg_mr+0x4c/0x60 [rdma_rxe] ib_dereg_mr_user+0xa8/0x200 [ib_core] ib_mr_pool_destroy+0x77/0xb0 [ib_core] nvme_rdma_destroy_queue_ib+0x89/0x240 [nvme_rdma] nvme_rdma_free_queue+0x40/0x50 [nvme_rdma] nvme_rdma_teardown_io_queues.part.0+0xc3/0x120 [nvme_rdma] nvme_rdma_error_recovery_work+0x4d/0xf0 [nvme_rdma] process_one_work+0x582/0xa40 ? pwq_dec_nr_in_flight+0x100/0x100 ? rwlock_bug.part.0+0x60/0x60 worker_thread+0x2a9/0x700 ? process_one_work+0xa40/0xa40 kthread+0x168/0x1a0 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30

In the Linux kernel, the following vulnerability has been resolved: powerpc/64s: Don't use DSISR for SLB faults Since commit 46ddcb3950a2 ("powerpc/mm: Show if a bad page fault on data is read or write.") we use page_fault_is_write(regs->dsisr) in __bad_page_fault() to determine if the fault is for a read or write, and change the message printed accordingly. But SLB faults, aka Data Segment Interrupts, don't set DSISR (Data Storage Interrupt Status Register) to a useful value. All ISA versions from v2.03 through v3.1 specify that the Data Segment Interrupt sets DSISR "to an undefined value". As far as I can see there's no mention of SLB faults setting DSISR in any BookIV content either. This manifests as accesses that should be a read being incorrectly reported as writes, for example, using the xmon "dump" command: 0:mon> d 0x5deadbeef0000000 5deadbeef0000000 [359526.415354][ C6] BUG: Unable to handle kernel data access on write at 0x5deadbeef0000000 [359526.415611][ C6] Faulting instruction address: 0xc00000000010a300 cpu 0x6: Vector: 380 (Data SLB Access) at [c00000000ffbf400] pc: c00000000010a300: mread+0x90/0x190 If we disassemble the PC, we see a load instruction: 0:mon> di c00000000010a300 c00000000010a300 89490000 lbz r10,0(r9) We can also see in exceptions-64s.S that the data_access_slb block doesn't set IDSISR=1, which means it doesn't load DSISR into pt_regs. So the value we're using to determine if the fault is a read/write is some stale value in pt_regs from a previous page fault. Rework the printing logic to separate the SLB fault case out, and only print read/write in the cases where we can determine it. The result looks like eg: 0:mon> d 0x5deadbeef0000000 5deadbeef0000000 [ 721.779525][ C6] BUG: Unable to handle kernel data access at 0x5deadbeef0000000 [ 721.779697][ C6] Faulting instruction address: 0xc00000000014cbe0 cpu 0x6: Vector: 380 (Data SLB Access) at [c00000000ffbf390] 0:mon> d 0 0000000000000000 [ 742.793242][ C6] BUG: Kernel NULL pointer dereference at 0x00000000 [ 742.793316][ C6] Faulting instruction address: 0xc00000000014cbe0 cpu 0x6: Vector: 380 (Data SLB Access) at [c00000000ffbf390]

In the Linux kernel, the following vulnerability has been resolved: cpufreq: governor: Use kobject release() method to free dbs_data The struct dbs_data embeds a struct gov_attr_set and the struct gov_attr_set embeds a kobject. Since every kobject must have a release() method and we can't use kfree() to free it directly, so introduce cpufreq_dbs_data_release() to release the dbs_data via the kobject::release() method. This fixes the calltrace like below: ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x34 WARNING: CPU: 12 PID: 810 at lib/debugobjects.c:505 debug_print_object+0xb8/0x100 Modules linked in: CPU: 12 PID: 810 Comm: sh Not tainted 5.16.0-next-20220120-yocto-standard+ #536 Hardware name: Marvell OcteonTX CN96XX board (DT) pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : debug_print_object+0xb8/0x100 lr : debug_print_object+0xb8/0x100 sp : ffff80001dfcf9a0 x29: ffff80001dfcf9a0 x28: 0000000000000001 x27: ffff0001464f0000 x26: 0000000000000000 x25: ffff8000090e3f00 x24: ffff80000af60210 x23: ffff8000094dfb78 x22: ffff8000090e3f00 x21: ffff0001080b7118 x20: ffff80000aeb2430 x19: ffff800009e8f5e0 x18: 0000000000000000 x17: 0000000000000002 x16: 00004d62e58be040 x15: 013590470523aff8 x14: ffff8000090e1828 x13: 0000000001359047 x12: 00000000f5257d14 x11: 0000000000040591 x10: 0000000066c1ffea x9 : ffff8000080d15e0 x8 : ffff80000a1765a8 x7 : 0000000000000000 x6 : 0000000000000001 x5 : ffff800009e8c000 x4 : ffff800009e8c760 x3 : 0000000000000000 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0001474ed040 Call trace: debug_print_object+0xb8/0x100 __debug_check_no_obj_freed+0x1d0/0x25c debug_check_no_obj_freed+0x24/0xa0 kfree+0x11c/0x440 cpufreq_dbs_governor_exit+0xa8/0xac cpufreq_exit_governor+0x44/0x90 cpufreq_set_policy+0x29c/0x570 store_scaling_governor+0x110/0x154 store+0xb0/0xe0 sysfs_kf_write+0x58/0x84 kernfs_fop_write_iter+0x12c/0x1c0 new_sync_write+0xf0/0x18c vfs_write+0x1cc/0x220 ksys_write+0x74/0x100 __arm64_sys_write+0x28/0x3c invoke_syscall.constprop.0+0x58/0xf0 do_el0_svc+0x70/0x170 el0_svc+0x54/0x190 el0t_64_sync_handler+0xa4/0x130 el0t_64_sync+0x1a0/0x1a4 irq event stamp: 189006 hardirqs last enabled at (189005): [<ffff8000080849d0>] finish_task_switch.isra.0+0xe0/0x2c0 hardirqs last disabled at (189006): [<ffff8000090667a4>] el1_dbg+0x24/0xa0 softirqs last enabled at (188966): [<ffff8000080106d0>] __do_softirq+0x4b0/0x6a0 softirqs last disabled at (188957): [<ffff80000804a618>] __irq_exit_rcu+0x108/0x1a4 [ rjw: Because can be freed by the gov_attr_set_put() in cpufreq_dbs_governor_exit() now, it is also necessary to put the invocation of the governor ->exit() callback into the new cpufreq_dbs_data_release() function. ]

In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Fix null-ptr-deref in ib_core_cleanup() KASAN reported a null-ptr-deref error: KASAN: null-ptr-deref in range [0x0000000000000118-0x000000000000011f] CPU: 1 PID: 379 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) RIP: 0010:destroy_workqueue+0x2f/0x740 RSP: 0018:ffff888016137df8 EFLAGS: 00000202 ... Call Trace: ib_core_cleanup+0xa/0xa1 [ib_core] __do_sys_delete_module.constprop.0+0x34f/0x5b0 do_syscall_64+0x3a/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7fa1a0d221b7 ... It is because the fail of roce_gid_mgmt_init() is ignored: ib_core_init() roce_gid_mgmt_init() gid_cache_wq = alloc_ordered_workqueue # fail ... ib_core_cleanup() roce_gid_mgmt_cleanup() destroy_workqueue(gid_cache_wq) # destroy an unallocated wq Fix this by catching the fail of roce_gid_mgmt_init() in ib_core_init().

In the Linux kernel, the following vulnerability has been resolved: sh: cpuinfo: Fix a warning for CONFIG_CPUMASK_OFFSTACK When CONFIG_CPUMASK_OFFSTACK and CONFIG_DEBUG_PER_CPU_MAPS are selected, cpu_max_bits_warn() generates a runtime warning similar as below when showing /proc/cpuinfo. Fix this by using nr_cpu_ids (the runtime limit) instead of NR_CPUS to iterate CPUs. [ 3.052463] ------------[ cut here ]------------ [ 3.059679] WARNING: CPU: 3 PID: 1 at include/linux/cpumask.h:108 show_cpuinfo+0x5e8/0x5f0 [ 3.070072] Modules linked in: efivarfs autofs4 [ 3.076257] CPU: 0 PID: 1 Comm: systemd Not tainted 5.19-rc5+ #1052 [ 3.099465] Stack : 9000000100157b08 9000000000f18530 9000000000cf846c 9000000100154000 [ 3.109127] 9000000100157a50 0000000000000000 9000000100157a58 9000000000ef7430 [ 3.118774] 90000001001578e8 0000000000000040 0000000000000020 ffffffffffffffff [ 3.128412] 0000000000aaaaaa 1ab25f00eec96a37 900000010021de80 900000000101c890 [ 3.138056] 0000000000000000 0000000000000000 0000000000000000 0000000000aaaaaa [ 3.147711] ffff8000339dc220 0000000000000001 0000000006ab4000 0000000000000000 [ 3.157364] 900000000101c998 0000000000000004 9000000000ef7430 0000000000000000 [ 3.167012] 0000000000000009 000000000000006c 0000000000000000 0000000000000000 [ 3.176641] 9000000000d3de08 9000000001639390 90000000002086d8 00007ffff0080286 [ 3.186260] 00000000000000b0 0000000000000004 0000000000000000 0000000000071c1c [ 3.195868] ... [ 3.199917] Call Trace: [ 3.203941] [<90000000002086d8>] show_stack+0x38/0x14c [ 3.210666] [<9000000000cf846c>] dump_stack_lvl+0x60/0x88 [ 3.217625] [<900000000023d268>] __warn+0xd0/0x100 [ 3.223958] [<9000000000cf3c90>] warn_slowpath_fmt+0x7c/0xcc [ 3.231150] [<9000000000210220>] show_cpuinfo+0x5e8/0x5f0 [ 3.238080] [<90000000004f578c>] seq_read_iter+0x354/0x4b4 [ 3.245098] [<90000000004c2e90>] new_sync_read+0x17c/0x1c4 [ 3.252114] [<90000000004c5174>] vfs_read+0x138/0x1d0 [ 3.258694] [<90000000004c55f8>] ksys_read+0x70/0x100 [ 3.265265] [<9000000000cfde9c>] do_syscall+0x7c/0x94 [ 3.271820] [<9000000000202fe4>] handle_syscall+0xc4/0x160 [ 3.281824] ---[ end trace 8b484262b4b8c24c ]---

In the Linux kernel, the following vulnerability has been resolved: ASoC: rockchip: Fix PM usage reference of rockchip_i2s_tdm_resume pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to putting operation will result in reference leak here. We fix it by replacing it with pm_runtime_resume_and_get to keep usage counter balanced.

In the Linux kernel, the following vulnerability has been resolved: net: dsa: qca8k: reset cpu port on MTU change It was discovered that the Documentation lacks of a fundamental detail on how to correctly change the MAX_FRAME_SIZE of the switch. In fact if the MAX_FRAME_SIZE is changed while the cpu port is on, the switch panics and cease to send any packet. This cause the mgmt ethernet system to not receive any packet (the slow fallback still works) and makes the device not reachable. To recover from this a switch reset is required. To correctly handle this, turn off the cpu ports before changing the MAX_FRAME_SIZE and turn on again after the value is applied.

In the Linux kernel, the following vulnerability has been resolved: mtd: spi-nor: sst: Fix SST write failure 'commit 18bcb4aa54ea ("mtd: spi-nor: sst: Factor out common write operation to `sst_nor_write_data()`")' introduced a bug where only one byte of data is written, regardless of the number of bytes passed to sst_nor_write_data(), causing a kernel crash during the write operation. Ensure the correct number of bytes are written as passed to sst_nor_write_data(). Call trace: [ 57.400180] ------------[ cut here ]------------ [ 57.404842] While writing 2 byte written 1 bytes [ 57.409493] WARNING: CPU: 0 PID: 737 at drivers/mtd/spi-nor/sst.c:187 sst_nor_write_data+0x6c/0x74 [ 57.418464] Modules linked in: [ 57.421517] CPU: 0 UID: 0 PID: 737 Comm: mtd_debug Not tainted 6.12.0-g5ad04afd91f9 #30 [ 57.429517] Hardware name: Xilinx Versal A2197 Processor board revA - x-prc-02 revA (DT) [ 57.437600] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 57.444557] pc : sst_nor_write_data+0x6c/0x74 [ 57.448911] lr : sst_nor_write_data+0x6c/0x74 [ 57.453264] sp : ffff80008232bb40 [ 57.456570] x29: ffff80008232bb40 x28: 0000000000010000 x27: 0000000000000001 [ 57.463708] x26: 000000000000ffff x25: 0000000000000000 x24: 0000000000000000 [ 57.470843] x23: 0000000000010000 x22: ffff80008232bbf0 x21: ffff000816230000 [ 57.477978] x20: ffff0008056c0080 x19: 0000000000000002 x18: 0000000000000006 [ 57.485112] x17: 0000000000000000 x16: 0000000000000000 x15: ffff80008232b580 [ 57.492246] x14: 0000000000000000 x13: ffff8000816d1530 x12: 00000000000004a4 [ 57.499380] x11: 000000000000018c x10: ffff8000816fd530 x9 : ffff8000816d1530 [ 57.506515] x8 : 00000000fffff7ff x7 : ffff8000816fd530 x6 : 0000000000000001 [ 57.513649] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 [ 57.520782] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0008049b0000 [ 57.527916] Call trace: [ 57.530354] sst_nor_write_data+0x6c/0x74 [ 57.534361] sst_nor_write+0xb4/0x18c [ 57.538019] mtd_write_oob_std+0x7c/0x88 [ 57.541941] mtd_write_oob+0x70/0xbc [ 57.545511] mtd_write+0x68/0xa8 [ 57.548733] mtdchar_write+0x10c/0x290 [ 57.552477] vfs_write+0xb4/0x3a8 [ 57.555791] ksys_write+0x74/0x10c [ 57.559189] __arm64_sys_write+0x1c/0x28 [ 57.563109] invoke_syscall+0x54/0x11c [ 57.566856] el0_svc_common.constprop.0+0xc0/0xe0 [ 57.571557] do_el0_svc+0x1c/0x28 [ 57.574868] el0_svc+0x30/0xcc [ 57.577921] el0t_64_sync_handler+0x120/0x12c [ 57.582276] el0t_64_sync+0x190/0x194 [ 57.585933] ---[ end trace 0000000000000000 ]--- [pratyush@kernel.org: add Cc stable tag]

In the Linux kernel, the following vulnerability has been resolved: soc: samsung: exynos-chipid: Add NULL pointer check in exynos_chipid_probe() soc_dev_attr->revision could be NULL, thus, a pointer check is added to prevent potential NULL pointer dereference. This is similar to the fix in commit 3027e7b15b02 ("ice: Fix some null pointer dereference issues in ice_ptp.c"). This issue is found by our static analysis tool.

A null pointer dereference was found in the Linux kernel's Integrated Sensor Hub (ISH) driver. This issue could allow a local user to crash the system.

An issue was discovered in the Linux kernel brcm_nvram_parse in drivers/nvmem/brcm_nvram.c. Lacks for the check of the return value of kzalloc() can cause the NULL Pointer Dereference.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Don't call cleanup on profile rollback failure When profile rollback fails in mlx5e_netdev_change_profile, the netdev profile var is left set to NULL. Avoid a crash when unloading the driver by not calling profile->cleanup in such a case. This was encountered while testing, with the original trigger that the wq rescuer thread creation got interrupted (presumably due to Ctrl+C-ing modprobe), which gets converted to ENOMEM (-12) by mlx5e_priv_init, the profile rollback also fails for the same reason (signal still active) so the profile is left as NULL, leading to a crash later in _mlx5e_remove. [ 732.473932] mlx5_core 0000:08:00.1: E-Switch: Unload vfs: mode(OFFLOADS), nvfs(2), necvfs(0), active vports(2) [ 734.525513] workqueue: Failed to create a rescuer kthread for wq "mlx5e": -EINTR [ 734.557372] mlx5_core 0000:08:00.1: mlx5e_netdev_init_profile:6235:(pid 6086): mlx5e_priv_init failed, err=-12 [ 734.559187] mlx5_core 0000:08:00.1 eth3: mlx5e_netdev_change_profile: new profile init failed, -12 [ 734.560153] workqueue: Failed to create a rescuer kthread for wq "mlx5e": -EINTR [ 734.589378] mlx5_core 0000:08:00.1: mlx5e_netdev_init_profile:6235:(pid 6086): mlx5e_priv_init failed, err=-12 [ 734.591136] mlx5_core 0000:08:00.1 eth3: mlx5e_netdev_change_profile: failed to rollback to orig profile, -12 [ 745.537492] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 745.538222] #PF: supervisor read access in kernel mode <snipped> [ 745.551290] Call Trace: [ 745.551590] <TASK> [ 745.551866] ? __die+0x20/0x60 [ 745.552218] ? page_fault_oops+0x150/0x400 [ 745.555307] ? exc_page_fault+0x79/0x240 [ 745.555729] ? asm_exc_page_fault+0x22/0x30 [ 745.556166] ? mlx5e_remove+0x6b/0xb0 [mlx5_core] [ 745.556698] auxiliary_bus_remove+0x18/0x30 [ 745.557134] device_release_driver_internal+0x1df/0x240 [ 745.557654] bus_remove_device+0xd7/0x140 [ 745.558075] device_del+0x15b/0x3c0 [ 745.558456] mlx5_rescan_drivers_locked.part.0+0xb1/0x2f0 [mlx5_core] [ 745.559112] mlx5_unregister_device+0x34/0x50 [mlx5_core] [ 745.559686] mlx5_uninit_one+0x46/0xf0 [mlx5_core] [ 745.560203] remove_one+0x4e/0xd0 [mlx5_core] [ 745.560694] pci_device_remove+0x39/0xa0 [ 745.561112] device_release_driver_internal+0x1df/0x240 [ 745.561631] driver_detach+0x47/0x90 [ 745.562022] bus_remove_driver+0x84/0x100 [ 745.562444] pci_unregister_driver+0x3b/0x90 [ 745.562890] mlx5_cleanup+0xc/0x1b [mlx5_core] [ 745.563415] __x64_sys_delete_module+0x14d/0x2f0 [ 745.563886] ? kmem_cache_free+0x1b0/0x460 [ 745.564313] ? lockdep_hardirqs_on_prepare+0xe2/0x190 [ 745.564825] do_syscall_64+0x6d/0x140 [ 745.565223] entry_SYSCALL_64_after_hwframe+0x4b/0x53 [ 745.565725] RIP: 0033:0x7f1579b1288b

In the Linux kernel, the following vulnerability has been resolved: spi: spi-fsl-dspi: Fix crash when not using GPIO chip select Add check for the return value of spi_get_csgpiod() to avoid passing a NULL pointer to gpiod_direction_output(), preventing a crash when GPIO chip select is not used. Fix below crash: [ 4.251960] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 4.260762] Mem abort info: [ 4.263556] ESR = 0x0000000096000004 [ 4.267308] EC = 0x25: DABT (current EL), IL = 32 bits [ 4.272624] SET = 0, FnV = 0 [ 4.275681] EA = 0, S1PTW = 0 [ 4.278822] FSC = 0x04: level 0 translation fault [ 4.283704] Data abort info: [ 4.286583] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 4.292074] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 4.297130] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 4.302445] [0000000000000000] user address but active_mm is swapper [ 4.308805] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 4.315072] Modules linked in: [ 4.318124] CPU: 2 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.0-rc4-next-20241023-00008-ga20ec42c5fc1 #359 [ 4.328130] Hardware name: LS1046A QDS Board (DT) [ 4.332832] pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 4.339794] pc : gpiod_direction_output+0x34/0x5c [ 4.344505] lr : gpiod_direction_output+0x18/0x5c [ 4.349208] sp : ffff80008003b8f0 [ 4.352517] x29: ffff80008003b8f0 x28: 0000000000000000 x27: ffffc96bcc7e9068 [ 4.359659] x26: ffffc96bcc6e00b0 x25: ffffc96bcc598398 x24: ffff447400132810 [ 4.366800] x23: 0000000000000000 x22: 0000000011e1a300 x21: 0000000000020002 [ 4.373940] x20: 0000000000000000 x19: 0000000000000000 x18: ffffffffffffffff [ 4.381081] x17: ffff44740016e600 x16: 0000000500000003 x15: 0000000000000007 [ 4.388221] x14: 0000000000989680 x13: 0000000000020000 x12: 000000000000001e [ 4.395362] x11: 0044b82fa09b5a53 x10: 0000000000000019 x9 : 0000000000000008 [ 4.402502] x8 : 0000000000000002 x7 : 0000000000000007 x6 : 0000000000000000 [ 4.409641] x5 : 0000000000000200 x4 : 0000000002000000 x3 : 0000000000000000 [ 4.416781] x2 : 0000000000022202 x1 : 0000000000000000 x0 : 0000000000000000 [ 4.423921] Call trace: [ 4.426362] gpiod_direction_output+0x34/0x5c (P) [ 4.431067] gpiod_direction_output+0x18/0x5c (L) [ 4.435771] dspi_setup+0x220/0x334

In the Linux kernel, the following vulnerability has been resolved: drm/fbdev-dma: Only cleanup deferred I/O if necessary Commit 5a498d4d06d6 ("drm/fbdev-dma: Only install deferred I/O if necessary") initializes deferred I/O only if it is used. drm_fbdev_dma_fb_destroy() however calls fb_deferred_io_cleanup() unconditionally with struct fb_info.fbdefio == NULL. KASAN with the out-of-tree Apple silicon display driver posts following warning from __flush_work() of a random struct work_struct instead of the expected NULL pointer derefs. [ 22.053799] ------------[ cut here ]------------ [ 22.054832] WARNING: CPU: 2 PID: 1 at kernel/workqueue.c:4177 __flush_work+0x4d8/0x580 [ 22.056597] Modules linked in: uhid bnep uinput nls_ascii ip6_tables ip_tables i2c_dev loop fuse dm_multipath nfnetlink zram hid_magicmouse btrfs xor xor_neon brcmfmac_wcc raid6_pq hci_bcm4377 bluetooth brcmfmac hid_apple brcmutil nvmem_spmi_mfd simple_mfd_spmi dockchannel_hid cfg80211 joydev regmap_spmi nvme_apple ecdh_generic ecc macsmc_hid rfkill dwc3 appledrm snd_soc_macaudio macsmc_power nvme_core apple_isp phy_apple_atc apple_sart apple_rtkit_helper apple_dockchannel tps6598x macsmc_hwmon snd_soc_cs42l84 videobuf2_v4l2 spmi_apple_controller nvmem_apple_efuses videobuf2_dma_sg apple_z2 videobuf2_memops spi_nor panel_summit videobuf2_common asahi videodev pwm_apple apple_dcp snd_soc_apple_mca apple_admac spi_apple clk_apple_nco i2c_pasemi_platform snd_pcm_dmaengine mc i2c_pasemi_core mux_core ofpart adpdrm drm_dma_helper apple_dart apple_soc_cpufreq leds_pwm phram [ 22.073768] CPU: 2 UID: 0 PID: 1 Comm: systemd-shutdow Not tainted 6.11.2-asahi+ #asahi-dev [ 22.075612] Hardware name: Apple MacBook Pro (13-inch, M2, 2022) (DT) [ 22.077032] pstate: 01400005 (nzcv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 22.078567] pc : __flush_work+0x4d8/0x580 [ 22.079471] lr : __flush_work+0x54/0x580 [ 22.080345] sp : ffffc000836ef820 [ 22.081089] x29: ffffc000836ef880 x28: 0000000000000000 x27: ffff80002ddb7128 [ 22.082678] x26: dfffc00000000000 x25: 1ffff000096f0c57 x24: ffffc00082d3e358 [ 22.084263] x23: ffff80004b7862b8 x22: dfffc00000000000 x21: ffff80005aa1d470 [ 22.085855] x20: ffff80004b786000 x19: ffff80004b7862a0 x18: 0000000000000000 [ 22.087439] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000005 [ 22.089030] x14: 1ffff800106ddf0a x13: 0000000000000000 x12: 0000000000000000 [ 22.090618] x11: ffffb800106ddf0f x10: dfffc00000000000 x9 : 1ffff800106ddf0e [ 22.092206] x8 : 0000000000000000 x7 : aaaaaaaaaaaaaaaa x6 : 0000000000000001 [ 22.093790] x5 : ffffc000836ef728 x4 : 0000000000000000 x3 : 0000000000000020 [ 22.095368] x2 : 0000000000000008 x1 : 00000000000000aa x0 : 0000000000000000 [ 22.096955] Call trace: [ 22.097505] __flush_work+0x4d8/0x580 [ 22.098330] flush_delayed_work+0x80/0xb8 [ 22.099231] fb_deferred_io_cleanup+0x3c/0x130 [ 22.100217] drm_fbdev_dma_fb_destroy+0x6c/0xe0 [drm_dma_helper] [ 22.101559] unregister_framebuffer+0x210/0x2f0 [ 22.102575] drm_fb_helper_unregister_info+0x48/0x60 [ 22.103683] drm_fbdev_dma_client_unregister+0x4c/0x80 [drm_dma_helper] [ 22.105147] drm_client_dev_unregister+0x1cc/0x230 [ 22.106217] drm_dev_unregister+0x58/0x570 [ 22.107125] apple_drm_unbind+0x50/0x98 [appledrm] [ 22.108199] component_del+0x1f8/0x3a8 [ 22.109042] dcp_platform_shutdown+0x24/0x38 [apple_dcp] [ 22.110357] platform_shutdown+0x70/0x90 [ 22.111219] device_shutdown+0x368/0x4d8 [ 22.112095] kernel_restart+0x6c/0x1d0 [ 22.112946] __arm64_sys_reboot+0x1c8/0x328 [ 22.113868] invoke_syscall+0x78/0x1a8 [ 22.114703] do_el0_svc+0x124/0x1a0 [ 22.115498] el0_svc+0x3c/0xe0 [ 22.116181] el0t_64_sync_handler+0x70/0xc0 [ 22.117110] el0t_64_sync+0x190/0x198 [ 22.117931] ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: device-dax: correct pgoff align in dax_set_mapping() pgoff should be aligned using ALIGN_DOWN() instead of ALIGN(). Otherwise, vmf->address not aligned to fault_size will be aligned to the next alignment, that can result in memory failure getting the wrong address. It's a subtle situation that only can be observed in page_mapped_in_vma() after the page is page fault handled by dev_dax_huge_fault. Generally, there is little chance to perform page_mapped_in_vma in dev-dax's page unless in specific error injection to the dax device to trigger an MCE - memory-failure. In that case, page_mapped_in_vma() will be triggered to determine which task is accessing the failure address and kill that task in the end. We used self-developed dax device (which is 2M aligned mapping) , to perform error injection to random address. It turned out that error injected to non-2M-aligned address was causing endless MCE until panic. Because page_mapped_in_vma() kept resulting wrong address and the task accessing the failure address was never killed properly: [ 3783.719419] Memory failure: 0x200c9742: recovery action for dax page: Recovered [ 3784.049006] mce: Uncorrected hardware memory error in user-access at 200c9742380 [ 3784.049190] Memory failure: 0x200c9742: recovery action for dax page: Recovered [ 3784.448042] mce: Uncorrected hardware memory error in user-access at 200c9742380 [ 3784.448186] Memory failure: 0x200c9742: recovery action for dax page: Recovered [ 3784.792026] mce: Uncorrected hardware memory error in user-access at 200c9742380 [ 3784.792179] Memory failure: 0x200c9742: recovery action for dax page: Recovered [ 3785.162502] mce: Uncorrected hardware memory error in user-access at 200c9742380 [ 3785.162633] Memory failure: 0x200c9742: recovery action for dax page: Recovered [ 3785.461116] mce: Uncorrected hardware memory error in user-access at 200c9742380 [ 3785.461247] Memory failure: 0x200c9742: recovery action for dax page: Recovered [ 3785.764730] mce: Uncorrected hardware memory error in user-access at 200c9742380 [ 3785.764859] Memory failure: 0x200c9742: recovery action for dax page: Recovered [ 3786.042128] mce: Uncorrected hardware memory error in user-access at 200c9742380 [ 3786.042259] Memory failure: 0x200c9742: recovery action for dax page: Recovered [ 3786.464293] mce: Uncorrected hardware memory error in user-access at 200c9742380 [ 3786.464423] Memory failure: 0x200c9742: recovery action for dax page: Recovered [ 3786.818090] mce: Uncorrected hardware memory error in user-access at 200c9742380 [ 3786.818217] Memory failure: 0x200c9742: recovery action for dax page: Recovered [ 3787.085297] mce: Uncorrected hardware memory error in user-access at 200c9742380 [ 3787.085424] Memory failure: 0x200c9742: recovery action for dax page: Recovered It took us several weeks to pinpoint this problem,  but we eventually used bpftrace to trace the page fault and mce address and successfully identified the issue. Joao added: ; Likely we never reproduce in production because we always pin : device-dax regions in the region align they provide (Qemu does : similarly with prealloc in hugetlb/file backed memory). I think this : bug requires that we touch *unpinned* device-dax regions unaligned to : the device-dax selected alignment (page size i.e. 4K/2M/1G)

In the Linux kernel, the following vulnerability has been resolved: platform/x86/intel/pmc: Fix pmc_core_iounmap to call iounmap for valid addresses Commit 50c6dbdfd16e ("x86/ioremap: Improve iounmap() address range checks") introduces a WARN when adrress ranges of iounmap are invalid. On Thinkpad P1 Gen 7 (Meteor Lake-P) this caused the following warning to appear: WARNING: CPU: 7 PID: 713 at arch/x86/mm/ioremap.c:461 iounmap+0x58/0x1f0 Modules linked in: rfkill(+) snd_timer(+) fjes(+) snd soundcore intel_pmc_core(+) int3403_thermal(+) int340x_thermal_zone intel_vsec pmt_telemetry acpi_pad pmt_class acpi_tad int3400_thermal acpi_thermal_rel joydev loop nfnetlink zram xe drm_suballoc_helper nouveau i915 mxm_wmi drm_ttm_helper gpu_sched drm_gpuvm drm_exec drm_buddy i2c_algo_bit crct10dif_pclmul crc32_pclmul ttm crc32c_intel polyval_clmulni rtsx_pci_sdmmc ucsi_acpi polyval_generic mmc_core hid_multitouch drm_display_helper ghash_clmulni_intel typec_ucsi nvme sha512_ssse3 video sha256_ssse3 nvme_core intel_vpu sha1_ssse3 rtsx_pci cec typec nvme_auth i2c_hid_acpi i2c_hid wmi pinctrl_meteorlake serio_raw ip6_tables ip_tables fuse CPU: 7 UID: 0 PID: 713 Comm: (udev-worker) Not tainted 6.12.0-rc2iounmap+ #42 Hardware name: LENOVO 21KWCTO1WW/21KWCTO1WW, BIOS N48ET19W (1.06 ) 07/18/2024 RIP: 0010:iounmap+0x58/0x1f0 Code: 85 6a 01 00 00 48 8b 05 e6 e2 28 04 48 39 c5 72 19 eb 26 cc cc cc 48 ba 00 00 00 00 00 00 32 00 48 8d 44 02 ff 48 39 c5 72 23 <0f> 0b 48 83 c4 08 5b 5d 41 5c c3 cc cc cc cc 48 ba 00 00 00 00 00 RSP: 0018:ffff888131eff038 EFLAGS: 00010207 RAX: ffffc90000000000 RBX: 0000000000000000 RCX: ffff888e33b80000 RDX: dffffc0000000000 RSI: ffff888e33bc29c0 RDI: 0000000000000000 RBP: 0000000000000000 R08: ffff8881598a8000 R09: ffff888e2ccedc10 R10: 0000000000000003 R11: ffffffffb3367634 R12: 00000000fe000000 R13: ffff888101d0da28 R14: ffffffffc2e437e0 R15: ffff888110b03b28 FS: 00007f3c1d4b3980(0000) GS:ffff888e33b80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005651cfc93578 CR3: 0000000124e4c002 CR4: 0000000000f70ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff07f0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ? __warn.cold+0xb6/0x176 ? iounmap+0x58/0x1f0 ? report_bug+0x1f4/0x2b0 ? handle_bug+0x58/0x90 ? exc_invalid_op+0x17/0x40 ? asm_exc_invalid_op+0x1a/0x20 ? iounmap+0x58/0x1f0 pmc_core_ssram_get_pmc+0x477/0x6c0 [intel_pmc_core] ? __pfx_pmc_core_ssram_get_pmc+0x10/0x10 [intel_pmc_core] ? __pfx_do_pci_enable_device+0x10/0x10 ? pci_wait_for_pending+0x60/0x110 ? pci_enable_device_flags+0x1e3/0x2e0 ? __pfx_mtl_core_init+0x10/0x10 [intel_pmc_core] pmc_core_ssram_init+0x7f/0x110 [intel_pmc_core] mtl_core_init+0xda/0x130 [intel_pmc_core] ? __mutex_init+0xb9/0x130 pmc_core_probe+0x27e/0x10b0 [intel_pmc_core] ? _raw_spin_lock_irqsave+0x96/0xf0 ? __pfx_pmc_core_probe+0x10/0x10 [intel_pmc_core] ? __pfx_mutex_unlock+0x10/0x10 ? __pfx_mutex_lock+0x10/0x10 ? device_pm_check_callbacks+0x82/0x370 ? acpi_dev_pm_attach+0x234/0x2b0 platform_probe+0x9f/0x150 really_probe+0x1e0/0x8a0 __driver_probe_device+0x18c/0x370 ? __pfx___driver_attach+0x10/0x10 driver_probe_device+0x4a/0x120 __driver_attach+0x190/0x4a0 ? __pfx___driver_attach+0x10/0x10 bus_for_each_dev+0x103/0x180 ? __pfx_bus_for_each_dev+0x10/0x10 ? klist_add_tail+0x136/0x270 bus_add_driver+0x2fc/0x540 driver_register+0x1a5/0x360 ? __pfx_pmc_core_driver_init+0x10/0x10 [intel_pmc_core] do_one_initcall+0xa4/0x380 ? __pfx_do_one_initcall+0x10/0x10 ? kasan_unpoison+0x44/0x70 do_init_module+0x296/0x800 load_module+0x5090/0x6ce0 ? __pfx_load_module+0x10/0x10 ? ima_post_read_file+0x193/0x200 ? __pfx_ima_post_read_file+0x10/0x10 ? rw_verify_area+0x152/0x4c0 ? kernel_read_file+0x257/0x750 ? __pfx_kernel_read_file+0x10/0x10 ? __pfx_filemap_get_read_batch+0x10/0x10 ? init_module_from_file+0xd1/0x130 init_module_from_file+0xd1/0x130 ? __pfx_init_module_from_file+0x10/0 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: iio: gts-helper: Fix memory leaks in iio_gts_build_avail_scale_table() modprobe iio-test-gts and rmmod it, then the following memory leak occurs: unreferenced object 0xffffff80c810be00 (size 64): comm "kunit_try_catch", pid 1654, jiffies 4294913981 hex dump (first 32 bytes): 02 00 00 00 08 00 00 00 20 00 00 00 40 00 00 00 ........ ...@... 80 00 00 00 00 02 00 00 00 04 00 00 00 08 00 00 ................ backtrace (crc a63d875e): [<0000000028c1b3c2>] kmemleak_alloc+0x34/0x40 [<000000001d6ecc87>] __kmalloc_noprof+0x2bc/0x3c0 [<00000000393795c1>] devm_iio_init_iio_gts+0x4b4/0x16f4 [<0000000071bb4b09>] 0xffffffdf052a62e0 [<000000000315bc18>] 0xffffffdf052a6488 [<00000000f9dc55b5>] kunit_try_run_case+0x13c/0x3ac [<00000000175a3fd4>] kunit_generic_run_threadfn_adapter+0x80/0xec [<00000000f505065d>] kthread+0x2e8/0x374 [<00000000bbfb0e5d>] ret_from_fork+0x10/0x20 unreferenced object 0xffffff80cbfe9e70 (size 16): comm "kunit_try_catch", pid 1658, jiffies 4294914015 hex dump (first 16 bytes): 10 00 00 00 40 00 00 00 80 00 00 00 00 00 00 00 ....@........... backtrace (crc 857f0cb4): [<0000000028c1b3c2>] kmemleak_alloc+0x34/0x40 [<000000001d6ecc87>] __kmalloc_noprof+0x2bc/0x3c0 [<00000000393795c1>] devm_iio_init_iio_gts+0x4b4/0x16f4 [<0000000071bb4b09>] 0xffffffdf052a62e0 [<000000007d089d45>] 0xffffffdf052a6864 [<00000000f9dc55b5>] kunit_try_run_case+0x13c/0x3ac [<00000000175a3fd4>] kunit_generic_run_threadfn_adapter+0x80/0xec [<00000000f505065d>] kthread+0x2e8/0x374 [<00000000bbfb0e5d>] ret_from_fork+0x10/0x20 ...... It includes 5*5 times "size 64" memory leaks, which correspond to 5 times test_init_iio_gain_scale() calls with gts_test_gains size 10 (10*size(int)) and gts_test_itimes size 5. It also includes 5*1 times "size 16" memory leak, which correspond to one time __test_init_iio_gain_scale() call with gts_test_gains_gain_low size 3 (3*size(int)) and gts_test_itimes size 5. The reason is that the per_time_gains[i] is not freed which is allocated in the "gts->num_itime" for loop in iio_gts_build_avail_scale_table().

In the Linux kernel, the following vulnerability has been resolved: usbnet: fix memory leak in error case usbnet_write_cmd_async() mixed up which buffers need to be freed in which error case. v2: add Fixes tag v3: fix uninitialized buf pointer

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Initialize denominators' default to 1 [WHAT & HOW] Variables used as denominators and maybe not assigned to other values, should not be 0. Change their default to 1 so they are never 0. This fixes 10 DIVIDE_BY_ZERO issues reported by Coverity.

In the Linux kernel, the following vulnerability has been resolved: dmaengine: ti: k3-udma-glue: fix memory leak when register device fail If device_register() fails, it should call put_device() to give up reference, the name allocated in dev_set_name() can be freed in callback function kobject_cleanup().

In the Linux kernel, the following vulnerability has been resolved: net: ibmveth: make veth_pool_store stop hanging v2: - Created a single error handling unlock and exit in veth_pool_store - Greatly expanded commit message with previous explanatory-only text Summary: Use rtnl_mutex to synchronize veth_pool_store with itself, ibmveth_close and ibmveth_open, preventing multiple calls in a row to napi_disable. Background: Two (or more) threads could call veth_pool_store through writing to /sys/devices/vio/30000002/pool*/*. You can do this easily with a little shell script. This causes a hang. I configured LOCKDEP, compiled ibmveth.c with DEBUG, and built a new kernel. I ran this test again and saw: Setting pool0/active to 0 Setting pool1/active to 1 [ 73.911067][ T4365] ibmveth 30000002 eth0: close starting Setting pool1/active to 1 Setting pool1/active to 0 [ 73.911367][ T4366] ibmveth 30000002 eth0: close starting [ 73.916056][ T4365] ibmveth 30000002 eth0: close complete [ 73.916064][ T4365] ibmveth 30000002 eth0: open starting [ 110.808564][ T712] systemd-journald[712]: Sent WATCHDOG=1 notification. [ 230.808495][ T712] systemd-journald[712]: Sent WATCHDOG=1 notification. [ 243.683786][ T123] INFO: task stress.sh:4365 blocked for more than 122 seconds. [ 243.683827][ T123] Not tainted 6.14.0-01103-g2df0c02dab82-dirty #8 [ 243.683833][ T123] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 243.683838][ T123] task:stress.sh state:D stack:28096 pid:4365 tgid:4365 ppid:4364 task_flags:0x400040 flags:0x00042000 [ 243.683852][ T123] Call Trace: [ 243.683857][ T123] [c00000000c38f690] [0000000000000001] 0x1 (unreliable) [ 243.683868][ T123] [c00000000c38f840] [c00000000001f908] __switch_to+0x318/0x4e0 [ 243.683878][ T123] [c00000000c38f8a0] [c000000001549a70] __schedule+0x500/0x12a0 [ 243.683888][ T123] [c00000000c38f9a0] [c00000000154a878] schedule+0x68/0x210 [ 243.683896][ T123] [c00000000c38f9d0] [c00000000154ac80] schedule_preempt_disabled+0x30/0x50 [ 243.683904][ T123] [c00000000c38fa00] [c00000000154dbb0] __mutex_lock+0x730/0x10f0 [ 243.683913][ T123] [c00000000c38fb10] [c000000001154d40] napi_enable+0x30/0x60 [ 243.683921][ T123] [c00000000c38fb40] [c000000000f4ae94] ibmveth_open+0x68/0x5dc [ 243.683928][ T123] [c00000000c38fbe0] [c000000000f4aa20] veth_pool_store+0x220/0x270 [ 243.683936][ T123] [c00000000c38fc70] [c000000000826278] sysfs_kf_write+0x68/0xb0 [ 243.683944][ T123] [c00000000c38fcb0] [c0000000008240b8] kernfs_fop_write_iter+0x198/0x2d0 [ 243.683951][ T123] [c00000000c38fd00] [c00000000071b9ac] vfs_write+0x34c/0x650 [ 243.683958][ T123] [c00000000c38fdc0] [c00000000071bea8] ksys_write+0x88/0x150 [ 243.683966][ T123] [c00000000c38fe10] [c0000000000317f4] system_call_exception+0x124/0x340 [ 243.683973][ T123] [c00000000c38fe50] [c00000000000d05c] system_call_vectored_common+0x15c/0x2ec ... [ 243.684087][ T123] Showing all locks held in the system: [ 243.684095][ T123] 1 lock held by khungtaskd/123: [ 243.684099][ T123] #0: c00000000278e370 (rcu_read_lock){....}-{1:2}, at: debug_show_all_locks+0x50/0x248 [ 243.684114][ T123] 4 locks held by stress.sh/4365: [ 243.684119][ T123] #0: c00000003a4cd3f8 (sb_writers#3){.+.+}-{0:0}, at: ksys_write+0x88/0x150 [ 243.684132][ T123] #1: c000000041aea888 (&of->mutex#2){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x154/0x2d0 [ 243.684143][ T123] #2: c0000000366fb9a8 (kn->active#64){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x160/0x2d0 [ 243.684155][ T123] #3: c000000035ff4cb8 (&dev->lock){+.+.}-{3:3}, at: napi_enable+0x30/0x60 [ 243.684166][ T123] 5 locks held by stress.sh/4366: [ 243.684170][ T123] #0: c00000003a4cd3f8 (sb_writers#3){.+.+}-{0:0}, at: ksys_write+0x88/0x150 [ 243. ---truncated---

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Assign normalized_pix_clk when color depth = 14 [WHY & HOW] A warning message "WARNING: CPU: 4 PID: 459 at ... /dc_resource.c:3397 calculate_phy_pix_clks+0xef/0x100 [amdgpu]" occurs because the display_color_depth == COLOR_DEPTH_141414 is not handled. This is observed in Radeon RX 6600 XT. It is fixed by assigning pix_clk * (14 * 3) / 24 - same as the rests. Also fixes the indentation in get_norm_pix_clk. (cherry picked from commit 274a87eb389f58eddcbc5659ab0b180b37e92775)

In the Linux kernel, the following vulnerability has been resolved: drm/amd: Guard against bad data for ATIF ACPI method If a BIOS provides bad data in response to an ATIF method call this causes a NULL pointer dereference in the caller. ``` ? show_regs (arch/x86/kernel/dumpstack.c:478 (discriminator 1)) ? __die (arch/x86/kernel/dumpstack.c:423 arch/x86/kernel/dumpstack.c:434) ? page_fault_oops (arch/x86/mm/fault.c:544 (discriminator 2) arch/x86/mm/fault.c:705 (discriminator 2)) ? do_user_addr_fault (arch/x86/mm/fault.c:440 (discriminator 1) arch/x86/mm/fault.c:1232 (discriminator 1)) ? acpi_ut_update_object_reference (drivers/acpi/acpica/utdelete.c:642) ? exc_page_fault (arch/x86/mm/fault.c:1542) ? asm_exc_page_fault (./arch/x86/include/asm/idtentry.h:623) ? amdgpu_atif_query_backlight_caps.constprop.0 (drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c:387 (discriminator 2)) amdgpu ? amdgpu_atif_query_backlight_caps.constprop.0 (drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c:386 (discriminator 1)) amdgpu ``` It has been encountered on at least one system, so guard for it. (cherry picked from commit c9b7c809b89f24e9372a4e7f02d64c950b07fdee)

In the Linux kernel, the following vulnerability has been resolved: thermal: core: Reference count the zone in thermal_zone_get_by_id() There are places in the thermal netlink code where nothing prevents the thermal zone object from going away while being accessed after it has been returned by thermal_zone_get_by_id(). To address this, make thermal_zone_get_by_id() get a reference on the thermal zone device object to be returned with the help of get_device(), under thermal_list_lock, and adjust all of its callers to this change with the help of the cleanup.h infrastructure.

In the Linux kernel, the following vulnerability has been resolved: ipv4: ip_tunnel: Fix suspicious RCU usage warning in ip_tunnel_find() The per-netns IP tunnel hash table is protected by the RTNL mutex and ip_tunnel_find() is only called from the control path where the mutex is taken. Add a lockdep expression to hlist_for_each_entry_rcu() in ip_tunnel_find() in order to validate that the mutex is held and to silence the suspicious RCU usage warning [1]. [1] WARNING: suspicious RCU usage 6.12.0-rc3-custom-gd95d9a31aceb #139 Not tainted ----------------------------- net/ipv4/ip_tunnel.c:221 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by ip/362: #0: ffffffff86fc7cb0 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x377/0xf60 stack backtrace: CPU: 12 UID: 0 PID: 362 Comm: ip Not tainted 6.12.0-rc3-custom-gd95d9a31aceb #139 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Call Trace: <TASK> dump_stack_lvl+0xba/0x110 lockdep_rcu_suspicious.cold+0x4f/0xd6 ip_tunnel_find+0x435/0x4d0 ip_tunnel_newlink+0x517/0x7a0 ipgre_newlink+0x14c/0x170 __rtnl_newlink+0x1173/0x19c0 rtnl_newlink+0x6c/0xa0 rtnetlink_rcv_msg+0x3cc/0xf60 netlink_rcv_skb+0x171/0x450 netlink_unicast+0x539/0x7f0 netlink_sendmsg+0x8c1/0xd80 ____sys_sendmsg+0x8f9/0xc20 ___sys_sendmsg+0x197/0x1e0 __sys_sendmsg+0x122/0x1f0 do_syscall_64+0xbb/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix command bitmask initialization Command bitmask have a dedicated bit for MANAGE_PAGES command, this bit isn't Initialize during command bitmask Initialization, only during MANAGE_PAGES. In addition, mlx5_cmd_trigger_completions() is trying to trigger completion for MANAGE_PAGES command as well. Hence, in case health error occurred before any MANAGE_PAGES command have been invoke (for example, during mlx5_enable_hca()), mlx5_cmd_trigger_completions() will try to trigger completion for MANAGE_PAGES command, which will result in null-ptr-deref error.[1] Fix it by Initialize command bitmask correctly. While at it, re-write the code for better understanding. [1] BUG: KASAN: null-ptr-deref in mlx5_cmd_trigger_completions+0x1db/0x600 [mlx5_core] Write of size 4 at addr 0000000000000214 by task kworker/u96:2/12078 CPU: 10 PID: 12078 Comm: kworker/u96:2 Not tainted 6.9.0-rc2_for_upstream_debug_2024_04_07_19_01 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Workqueue: mlx5_health0000:08:00.0 mlx5_fw_fatal_reporter_err_work [mlx5_core] Call Trace: <TASK> dump_stack_lvl+0x7e/0xc0 kasan_report+0xb9/0xf0 kasan_check_range+0xec/0x190 mlx5_cmd_trigger_completions+0x1db/0x600 [mlx5_core] mlx5_cmd_flush+0x94/0x240 [mlx5_core] enter_error_state+0x6c/0xd0 [mlx5_core] mlx5_fw_fatal_reporter_err_work+0xf3/0x480 [mlx5_core] process_one_work+0x787/0x1490 ? lockdep_hardirqs_on_prepare+0x400/0x400 ? pwq_dec_nr_in_flight+0xda0/0xda0 ? assign_work+0x168/0x240 worker_thread+0x586/0xd30 ? rescuer_thread+0xae0/0xae0 kthread+0x2df/0x3b0 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x2d/0x70 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork_asm+0x11/0x20 </TASK>

In the Linux kernel, the following vulnerability has been resolved: igb: Do not bring the device up after non-fatal error Commit 004d25060c78 ("igb: Fix igb_down hung on surprise removal") changed igb_io_error_detected() to ignore non-fatal pcie errors in order to avoid hung task that can happen when igb_down() is called multiple times. This caused an issue when processing transient non-fatal errors. igb_io_resume(), which is called after igb_io_error_detected(), assumes that device is brought down by igb_io_error_detected() if the interface is up. This resulted in panic with stacktrace below. [ T3256] igb 0000:09:00.0 haeth0: igb: haeth0 NIC Link is Down [ T292] pcieport 0000:00:1c.5: AER: Uncorrected (Non-Fatal) error received: 0000:09:00.0 [ T292] igb 0000:09:00.0: PCIe Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, (Requester ID) [ T292] igb 0000:09:00.0: device [8086:1537] error status/mask=00004000/00000000 [ T292] igb 0000:09:00.0: [14] CmpltTO [ 200.105524,009][ T292] igb 0000:09:00.0: AER: TLP Header: 00000000 00000000 00000000 00000000 [ T292] pcieport 0000:00:1c.5: AER: broadcast error_detected message [ T292] igb 0000:09:00.0: Non-correctable non-fatal error reported. [ T292] pcieport 0000:00:1c.5: AER: broadcast mmio_enabled message [ T292] pcieport 0000:00:1c.5: AER: broadcast resume message [ T292] ------------[ cut here ]------------ [ T292] kernel BUG at net/core/dev.c:6539! [ T292] invalid opcode: 0000 [#1] PREEMPT SMP [ T292] RIP: 0010:napi_enable+0x37/0x40 [ T292] Call Trace: [ T292] <TASK> [ T292] ? die+0x33/0x90 [ T292] ? do_trap+0xdc/0x110 [ T292] ? napi_enable+0x37/0x40 [ T292] ? do_error_trap+0x70/0xb0 [ T292] ? napi_enable+0x37/0x40 [ T292] ? napi_enable+0x37/0x40 [ T292] ? exc_invalid_op+0x4e/0x70 [ T292] ? napi_enable+0x37/0x40 [ T292] ? asm_exc_invalid_op+0x16/0x20 [ T292] ? napi_enable+0x37/0x40 [ T292] igb_up+0x41/0x150 [ T292] igb_io_resume+0x25/0x70 [ T292] report_resume+0x54/0x70 [ T292] ? report_frozen_detected+0x20/0x20 [ T292] pci_walk_bus+0x6c/0x90 [ T292] ? aer_print_port_info+0xa0/0xa0 [ T292] pcie_do_recovery+0x22f/0x380 [ T292] aer_process_err_devices+0x110/0x160 [ T292] aer_isr+0x1c1/0x1e0 [ T292] ? disable_irq_nosync+0x10/0x10 [ T292] irq_thread_fn+0x1a/0x60 [ T292] irq_thread+0xe3/0x1a0 [ T292] ? irq_set_affinity_notifier+0x120/0x120 [ T292] ? irq_affinity_notify+0x100/0x100 [ T292] kthread+0xe2/0x110 [ T292] ? kthread_complete_and_exit+0x20/0x20 [ T292] ret_from_fork+0x2d/0x50 [ T292] ? kthread_complete_and_exit+0x20/0x20 [ T292] ret_from_fork_asm+0x11/0x20 [ T292] </TASK> To fix this issue igb_io_resume() checks if the interface is running and the device is not down this means igb_io_error_detected() did not bring the device down and there is no need to bring it up.

In the Linux kernel, the following vulnerability has been resolved: bpf: Make sure internal and UAPI bpf_redirect flags don't overlap The bpf_redirect_info is shared between the SKB and XDP redirect paths, and the two paths use the same numeric flag values in the ri->flags field (specifically, BPF_F_BROADCAST == BPF_F_NEXTHOP). This means that if skb bpf_redirect_neigh() is used with a non-NULL params argument and, subsequently, an XDP redirect is performed using the same bpf_redirect_info struct, the XDP path will get confused and end up crashing, which syzbot managed to trigger. With the stack-allocated bpf_redirect_info, the structure is no longer shared between the SKB and XDP paths, so the crash doesn't happen anymore. However, different code paths using identically-numbered flag values in the same struct field still seems like a bit of a mess, so this patch cleans that up by moving the flag definitions together and redefining the three flags in BPF_F_REDIRECT_INTERNAL to not overlap with the flags used for XDP. It also adds a BUILD_BUG_ON() check to make sure the overlap is not re-introduced by mistake.

In the Linux kernel, the following vulnerability has been resolved: vrf: revert "vrf: Remove unnecessary RCU-bh critical section" This reverts commit 504fc6f4f7f681d2a03aa5f68aad549d90eab853. dev_queue_xmit_nit is expected to be called with BH disabled. __dev_queue_xmit has the following: /* Disable soft irqs for various locks below. Also * stops preemption for RCU. */ rcu_read_lock_bh(); VRF must follow this invariant. The referenced commit removed this protection. Which triggered a lockdep warning: ================================ WARNING: inconsistent lock state 6.11.0 #1 Tainted: G W -------------------------------- inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. btserver/134819 [HC0[0]:SC0[0]:HE1:SE1] takes: ffff8882da30c118 (rlock-AF_PACKET){+.?.}-{2:2}, at: tpacket_rcv+0x863/0x3b30 {IN-SOFTIRQ-W} state was registered at: lock_acquire+0x19a/0x4f0 _raw_spin_lock+0x27/0x40 packet_rcv+0xa33/0x1320 __netif_receive_skb_core.constprop.0+0xcb0/0x3a90 __netif_receive_skb_list_core+0x2c9/0x890 netif_receive_skb_list_internal+0x610/0xcc0 [...] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(rlock-AF_PACKET); <Interrupt> lock(rlock-AF_PACKET); *** DEADLOCK *** Call Trace: <TASK> dump_stack_lvl+0x73/0xa0 mark_lock+0x102e/0x16b0 __lock_acquire+0x9ae/0x6170 lock_acquire+0x19a/0x4f0 _raw_spin_lock+0x27/0x40 tpacket_rcv+0x863/0x3b30 dev_queue_xmit_nit+0x709/0xa40 vrf_finish_direct+0x26e/0x340 [vrf] vrf_l3_out+0x5f4/0xe80 [vrf] __ip_local_out+0x51e/0x7a0 [...]

In the Linux kernel, the following vulnerability has been resolved: tracing/probes: Fix MAX_TRACE_ARGS limit handling When creating a trace_probe we would set nr_args prior to truncating the arguments to MAX_TRACE_ARGS. However, we would only initialize arguments up to the limit. This caused invalid memory access when attempting to set up probes with more than 128 fetchargs. BUG: kernel NULL pointer dereference, address: 0000000000000020 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] PREEMPT SMP PTI CPU: 0 UID: 0 PID: 1769 Comm: cat Not tainted 6.11.0-rc7+ #8 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-1.fc39 04/01/2014 RIP: 0010:__set_print_fmt+0x134/0x330 Resolve the issue by applying the MAX_TRACE_ARGS limit earlier. Return an error when there are too many arguments instead of silently truncating.

In the Linux kernel, the following vulnerability has been resolved: media: v4l2-tpg: prevent the risk of a division by zero As reported by Coverity, the logic at tpg_precalculate_line() blindly rescales the buffer even when scaled_witdh is equal to zero. If this ever happens, this will cause a division by zero. Instead, add a WARN_ON_ONCE() to trigger such cases and return without doing any precalculation.

In the Linux kernel, the following vulnerability has been resolved: net: hns3: fix kernel crash when uninstalling driver When the driver is uninstalled and the VF is disabled concurrently, a kernel crash occurs. The reason is that the two actions call function pci_disable_sriov(). The num_VFs is checked to determine whether to release the corresponding resources. During the second calling, num_VFs is not 0 and the resource release function is called. However, the corresponding resource has been released during the first invoking. Therefore, the problem occurs: [15277.839633][T50670] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020 ... [15278.131557][T50670] Call trace: [15278.134686][T50670] klist_put+0x28/0x12c [15278.138682][T50670] klist_del+0x14/0x20 [15278.142592][T50670] device_del+0xbc/0x3c0 [15278.146676][T50670] pci_remove_bus_device+0x84/0x120 [15278.151714][T50670] pci_stop_and_remove_bus_device+0x6c/0x80 [15278.157447][T50670] pci_iov_remove_virtfn+0xb4/0x12c [15278.162485][T50670] sriov_disable+0x50/0x11c [15278.166829][T50670] pci_disable_sriov+0x24/0x30 [15278.171433][T50670] hnae3_unregister_ae_algo_prepare+0x60/0x90 [hnae3] [15278.178039][T50670] hclge_exit+0x28/0xd0 [hclge] [15278.182730][T50670] __se_sys_delete_module.isra.0+0x164/0x230 [15278.188550][T50670] __arm64_sys_delete_module+0x1c/0x30 [15278.193848][T50670] invoke_syscall+0x50/0x11c [15278.198278][T50670] el0_svc_common.constprop.0+0x158/0x164 [15278.203837][T50670] do_el0_svc+0x34/0xcc [15278.207834][T50670] el0_svc+0x20/0x30 For details, see the following figure. rmmod hclge disable VFs ---------------------------------------------------- hclge_exit() sriov_numvfs_store() ... device_lock() pci_disable_sriov() hns3_pci_sriov_configure() pci_disable_sriov() sriov_disable() sriov_disable() if !num_VFs : if !num_VFs : return; return; sriov_del_vfs() sriov_del_vfs() ... ... klist_put() klist_put() ... ... num_VFs = 0; num_VFs = 0; device_unlock(); In this patch, when driver is removing, we get the device_lock() to protect num_VFs, just like sriov_numvfs_store().

In the Linux kernel, the following vulnerability has been resolved: ixgbe: Add locking to prevent panic when setting sriov_numvfs to zero It is possible to disable VFs while the PF driver is processing requests from the VF driver. This can result in a panic. BUG: unable to handle kernel paging request at 000000000000106c PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI CPU: 8 PID: 0 Comm: swapper/8 Kdump: loaded Tainted: G I --------- - Hardware name: Dell Inc. PowerEdge R740/06WXJT, BIOS 2.8.2 08/27/2020 RIP: 0010:ixgbe_msg_task+0x4c8/0x1690 [ixgbe] Code: 00 00 48 8d 04 40 48 c1 e0 05 89 7c 24 24 89 fd 48 89 44 24 10 83 ff 01 0f 84 b8 04 00 00 4c 8b 64 24 10 4d 03 a5 48 22 00 00 <41> 80 7c 24 4c 00 0f 84 8a 03 00 00 0f b7 c7 83 f8 08 0f 84 8f 0a RSP: 0018:ffffb337869f8df8 EFLAGS: 00010002 RAX: 0000000000001020 RBX: 0000000000000000 RCX: 000000000000002b RDX: 0000000000000002 RSI: 0000000000000008 RDI: 0000000000000006 RBP: 0000000000000006 R08: 0000000000000002 R09: 0000000000029780 R10: 00006957d8f42832 R11: 0000000000000000 R12: 0000000000001020 R13: ffff8a00e8978ac0 R14: 000000000000002b R15: ffff8a00e8979c80 FS: 0000000000000000(0000) GS:ffff8a07dfd00000(0000) knlGS:00000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000106c CR3: 0000000063e10004 CR4: 00000000007726e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <IRQ> ? ttwu_do_wakeup+0x19/0x140 ? try_to_wake_up+0x1cd/0x550 ? ixgbevf_update_xcast_mode+0x71/0xc0 [ixgbevf] ixgbe_msix_other+0x17e/0x310 [ixgbe] __handle_irq_event_percpu+0x40/0x180 handle_irq_event_percpu+0x30/0x80 handle_irq_event+0x36/0x53 handle_edge_irq+0x82/0x190 handle_irq+0x1c/0x30 do_IRQ+0x49/0xd0 common_interrupt+0xf/0xf This can be eventually be reproduced with the following script: while : do echo 63 > /sys/class/net/<devname>/device/sriov_numvfs sleep 1 echo 0 > /sys/class/net/<devname>/device/sriov_numvfs sleep 1 done Add lock when disabling SR-IOV to prevent process VF mailbox communication.

In the Linux kernel, the following vulnerability has been resolved: dm mirror log: round up region bitmap size to BITS_PER_LONG The code in dm-log rounds up bitset_size to 32 bits. It then uses find_next_zero_bit_le on the allocated region. find_next_zero_bit_le accesses the bitmap using unsigned long pointers. So, on 64-bit architectures, it may access 4 bytes beyond the allocated size. Fix this bug by rounding up bitset_size to BITS_PER_LONG. This bug was found by running the lvm2 testsuite with kasan.

In the Linux kernel, the following vulnerability has been resolved: x86/sgx: Add overflow check in sgx_validate_offset_length() sgx_validate_offset_length() function verifies "offset" and "length" arguments provided by userspace, but was missing an overflow check on their addition. Add it.

In the Linux kernel, the following vulnerability has been resolved: netfilter: conntrack: clamp maximum hashtable size to INT_MAX Use INT_MAX as maximum size for the conntrack hashtable. Otherwise, it is possible to hit WARN_ON_ONCE in __kvmalloc_node_noprof() when resizing hashtable because __GFP_NOWARN is unset. See: 0708a0afe291 ("mm: Consider __GFP_NOWARN flag for oversized kvmalloc() calls") Note: hashtable resize is only possible from init_netns.

In the Linux kernel, the following vulnerability has been resolved: x86/ioapic: Handle allocation failures gracefully Breno observed panics when using failslab under certain conditions during runtime: can not alloc irq_pin_list (-1,0,20) Kernel panic - not syncing: IO-APIC: failed to add irq-pin. Can not proceed panic+0x4e9/0x590 mp_irqdomain_alloc+0x9ab/0xa80 irq_domain_alloc_irqs_locked+0x25d/0x8d0 __irq_domain_alloc_irqs+0x80/0x110 mp_map_pin_to_irq+0x645/0x890 acpi_register_gsi_ioapic+0xe6/0x150 hpet_open+0x313/0x480 That's a pointless panic which is a leftover of the historic IO/APIC code which panic'ed during early boot when the interrupt allocation failed. The only place which might justify panic is the PIT/HPET timer_check() code which tries to figure out whether the timer interrupt is delivered through the IO/APIC. But that code does not require to handle interrupt allocation failures. If the interrupt cannot be allocated then timer delivery fails and it either panics due to that or falls back to legacy mode. Cure this by removing the panic wrapper around __add_pin_to_irq_node() and making mp_irqdomain_alloc() aware of the failure condition and handle it as any other failure in this function gracefully.

In the Linux kernel, the following vulnerability has been resolved: soc: qcom: pdr: Fix the potential deadlock When some client process A call pdr_add_lookup() to add the look up for the service and does schedule locator work, later a process B got a new server packet indicating locator is up and call pdr_locator_new_server() which eventually sets pdr->locator_init_complete to true which process A sees and takes list lock and queries domain list but it will timeout due to deadlock as the response will queued to the same qmi->wq and it is ordered workqueue and process B is not able to complete new server request work due to deadlock on list lock. Fix it by removing the unnecessary list iteration as the list iteration is already being done inside locator work, so avoid it here and just call schedule_work() here. Process A Process B process_scheduled_works() pdr_add_lookup() qmi_data_ready_work() process_scheduled_works() pdr_locator_new_server() pdr->locator_init_complete=true; pdr_locator_work() mutex_lock(&pdr->list_lock); pdr_locate_service() mutex_lock(&pdr->list_lock); pdr_get_domain_list() pr_err("PDR: %s get domain list txn wait failed: %d\n", req->service_name, ret); Timeout error log due to deadlock: " PDR: tms/servreg get domain list txn wait failed: -110 PDR: service lookup for msm/adsp/sensor_pd:tms/servreg failed: -110 " Thanks to Bjorn and Johan for letting me know that this commit also fixes an audio regression when using the in-kernel pd-mapper as that makes it easier to hit this race. [1]

In the Linux kernel, the following vulnerability has been resolved: sctp: add mutual exclusion in proc_sctp_do_udp_port() We must serialize calls to sctp_udp_sock_stop() and sctp_udp_sock_start() or risk a crash as syzbot reported: Oops: general protection fault, probably for non-canonical address 0xdffffc000000000d: 0000 [#1] SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000068-0x000000000000006f] CPU: 1 UID: 0 PID: 6551 Comm: syz.1.44 Not tainted 6.14.0-syzkaller-g7f2ff7b62617 #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025 RIP: 0010:kernel_sock_shutdown+0x47/0x70 net/socket.c:3653 Call Trace: <TASK> udp_tunnel_sock_release+0x68/0x80 net/ipv4/udp_tunnel_core.c:181 sctp_udp_sock_stop+0x71/0x160 net/sctp/protocol.c:930 proc_sctp_do_udp_port+0x264/0x450 net/sctp/sysctl.c:553 proc_sys_call_handler+0x3d0/0x5b0 fs/proc/proc_sysctl.c:601 iter_file_splice_write+0x91c/0x1150 fs/splice.c:738 do_splice_from fs/splice.c:935 [inline] direct_splice_actor+0x18f/0x6c0 fs/splice.c:1158 splice_direct_to_actor+0x342/0xa30 fs/splice.c:1102 do_splice_direct_actor fs/splice.c:1201 [inline] do_splice_direct+0x174/0x240 fs/splice.c:1227 do_sendfile+0xafd/0xe50 fs/read_write.c:1368 __do_sys_sendfile64 fs/read_write.c:1429 [inline] __se_sys_sendfile64 fs/read_write.c:1415 [inline] __x64_sys_sendfile64+0x1d8/0x220 fs/read_write.c:1415 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]

In the Linux kernel, the following vulnerability has been resolved: ksmbd: check outstanding simultaneous SMB operations If Client send simultaneous SMB operations to ksmbd, It exhausts too much memory through the "ksmbd_work_cache”. It will cause OOM issue. ksmbd has a credit mechanism but it can't handle this problem. This patch add the check if it exceeds max credits to prevent this problem by assuming that one smb request consumes at least one credit.

A flaw was found in the Framebuffer Console (fbcon) in the Linux Kernel. When providing font->width and font->height greater than 32 to fbcon_set_font, since there are no checks in place, a shift-out-of-bounds occurs leading to undefined behavior and possible denial of service.

In the Linux kernel, the following vulnerability has been resolved: nfsd: don't ignore the return code of svc_proc_register() Currently, nfsd_proc_stat_init() ignores the return value of svc_proc_register(). If the procfile creation fails, then the kernel will WARN when it tries to remove the entry later. Fix nfsd_proc_stat_init() to return the same type of pointer as svc_proc_register(), and fix up nfsd_net_init() to check that and fail the nfsd_net construction if it occurs. svc_proc_register() can fail if the dentry can't be allocated, or if an identical dentry already exists. The second case is pretty unlikely in the nfsd_net construction codepath, so if this happens, return -ENOMEM.

In the Linux kernel, the following vulnerability has been resolved: btrfs: don't readahead the relocation inode on RST On relocation we're doing readahead on the relocation inode, but if the filesystem is backed by a RAID stripe tree we can get ENOENT (e.g. due to preallocated extents not being mapped in the RST) from the lookup. But readahead doesn't handle the error and submits invalid reads to the device, causing an assertion in the scatter-gather list code: BTRFS info (device nvme1n1): balance: start -d -m -s BTRFS info (device nvme1n1): relocating block group 6480920576 flags data|raid0 BTRFS error (device nvme1n1): cannot find raid-stripe for logical [6481928192, 6481969152] devid 2, profile raid0 ------------[ cut here ]------------ kernel BUG at include/linux/scatterlist.h:115! Oops: invalid opcode: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 1012 Comm: btrfs Not tainted 6.10.0-rc7+ #567 RIP: 0010:__blk_rq_map_sg+0x339/0x4a0 RSP: 0018:ffffc90001a43820 EFLAGS: 00010202 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffea00045d4802 RDX: 0000000117520000 RSI: 0000000000000000 RDI: ffff8881027d1000 RBP: 0000000000003000 R08: ffffea00045d4902 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000001000 R12: ffff8881003d10b8 R13: ffffc90001a438f0 R14: 0000000000000000 R15: 0000000000003000 FS: 00007fcc048a6900(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000002cd11000 CR3: 00000001109ea001 CR4: 0000000000370eb0 Call Trace: <TASK> ? __die_body.cold+0x14/0x25 ? die+0x2e/0x50 ? do_trap+0xca/0x110 ? do_error_trap+0x65/0x80 ? __blk_rq_map_sg+0x339/0x4a0 ? exc_invalid_op+0x50/0x70 ? __blk_rq_map_sg+0x339/0x4a0 ? asm_exc_invalid_op+0x1a/0x20 ? __blk_rq_map_sg+0x339/0x4a0 nvme_prep_rq.part.0+0x9d/0x770 nvme_queue_rq+0x7d/0x1e0 __blk_mq_issue_directly+0x2a/0x90 ? blk_mq_get_budget_and_tag+0x61/0x90 blk_mq_try_issue_list_directly+0x56/0xf0 blk_mq_flush_plug_list.part.0+0x52b/0x5d0 __blk_flush_plug+0xc6/0x110 blk_finish_plug+0x28/0x40 read_pages+0x160/0x1c0 page_cache_ra_unbounded+0x109/0x180 relocate_file_extent_cluster+0x611/0x6a0 ? btrfs_search_slot+0xba4/0xd20 ? balance_dirty_pages_ratelimited_flags+0x26/0xb00 relocate_data_extent.constprop.0+0x134/0x160 relocate_block_group+0x3f2/0x500 btrfs_relocate_block_group+0x250/0x430 btrfs_relocate_chunk+0x3f/0x130 btrfs_balance+0x71b/0xef0 ? kmalloc_trace_noprof+0x13b/0x280 btrfs_ioctl+0x2c2e/0x3030 ? kvfree_call_rcu+0x1e6/0x340 ? list_lru_add_obj+0x66/0x80 ? mntput_no_expire+0x3a/0x220 __x64_sys_ioctl+0x96/0xc0 do_syscall_64+0x54/0x110 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7fcc04514f9b Code: Unable to access opcode bytes at 0x7fcc04514f71. RSP: 002b:00007ffeba923370 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fcc04514f9b RDX: 00007ffeba923460 RSI: 00000000c4009420 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000013 R09: 0000000000000001 R10: 00007fcc043fbba8 R11: 0000000000000246 R12: 00007ffeba924fc5 R13: 00007ffeba923460 R14: 0000000000000002 R15: 00000000004d4bb0 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- RIP: 0010:__blk_rq_map_sg+0x339/0x4a0 RSP: 0018:ffffc90001a43820 EFLAGS: 00010202 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffea00045d4802 RDX: 0000000117520000 RSI: 0000000000000000 RDI: ffff8881027d1000 RBP: 0000000000003000 R08: ffffea00045d4902 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000001000 R12: ffff8881003d10b8 R13: ffffc90001a438f0 R14: 0000000000000000 R15: 0000000000003000 FS: 00007fcc048a6900(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fcc04514f71 CR3: 00000001109ea001 CR4: 0000000000370eb0 Kernel p ---truncated---

In the Linux kernel, the following vulnerability has been resolved: net: enetc: allocate vf_state during PF probes In the previous implementation, vf_state is allocated memory only when VF is enabled. However, net_device_ops::ndo_set_vf_mac() may be called before VF is enabled to configure the MAC address of VF. If this is the case, enetc_pf_set_vf_mac() will access vf_state, resulting in access to a null pointer. The simplified error log is as follows. root@ls1028ardb:~# ip link set eno0 vf 1 mac 00:0c:e7:66:77:89 [ 173.543315] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004 [ 173.637254] pc : enetc_pf_set_vf_mac+0x3c/0x80 Message from sy [ 173.641973] lr : do_setlink+0x4a8/0xec8 [ 173.732292] Call trace: [ 173.734740] enetc_pf_set_vf_mac+0x3c/0x80 [ 173.738847] __rtnl_newlink+0x530/0x89c [ 173.742692] rtnl_newlink+0x50/0x7c [ 173.746189] rtnetlink_rcv_msg+0x128/0x390 [ 173.750298] netlink_rcv_skb+0x60/0x130 [ 173.754145] rtnetlink_rcv+0x18/0x24 [ 173.757731] netlink_unicast+0x318/0x380 [ 173.761665] netlink_sendmsg+0x17c/0x3c8

In the Linux kernel, the following vulnerability has been resolved: scsi: target: core: Fix null-ptr-deref in target_alloc_device() There is a null-ptr-deref issue reported by KASAN: BUG: KASAN: null-ptr-deref in target_alloc_device+0xbc4/0xbe0 [target_core_mod] ... kasan_report+0xb9/0xf0 target_alloc_device+0xbc4/0xbe0 [target_core_mod] core_dev_setup_virtual_lun0+0xef/0x1f0 [target_core_mod] target_core_init_configfs+0x205/0x420 [target_core_mod] do_one_initcall+0xdd/0x4e0 ... entry_SYSCALL_64_after_hwframe+0x76/0x7e In target_alloc_device(), if allocing memory for dev queues fails, then dev will be freed by dev->transport->free_device(), but dev->transport is not initialized at that time, which will lead to a null pointer reference problem. Fixing this bug by freeing dev with hba->backend->ops->free_device().

An issue was discovered in the Linux kernel through 6.1-rc8. dpu_crtc_atomic_check in drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c lacks check of the return value of kzalloc() and will cause the NULL Pointer Dereference.

In the Linux kernel, the following vulnerability has been resolved: ext4: update orig_path in ext4_find_extent() In ext4_find_extent(), if the path is not big enough, we free it and set *orig_path to NULL. But after reallocating and successfully initializing the path, we don't update *orig_path, in which case the caller gets a valid path but a NULL ppath, and this may cause a NULL pointer dereference or a path memory leak. For example: ext4_split_extent path = *ppath = 2000 ext4_find_extent if (depth > path[0].p_maxdepth) kfree(path = 2000); *orig_path = path = NULL; path = kcalloc() = 3000 ext4_split_extent_at(*ppath = NULL) path = *ppath; ex = path[depth].p_ext; // NULL pointer dereference! ================================================================== BUG: kernel NULL pointer dereference, address: 0000000000000010 CPU: 6 UID: 0 PID: 576 Comm: fsstress Not tainted 6.11.0-rc2-dirty #847 RIP: 0010:ext4_split_extent_at+0x6d/0x560 Call Trace: <TASK> ext4_split_extent.isra.0+0xcb/0x1b0 ext4_ext_convert_to_initialized+0x168/0x6c0 ext4_ext_handle_unwritten_extents+0x325/0x4d0 ext4_ext_map_blocks+0x520/0xdb0 ext4_map_blocks+0x2b0/0x690 ext4_iomap_begin+0x20e/0x2c0 [...] ================================================================== Therefore, *orig_path is updated when the extent lookup succeeds, so that the caller can safely use path or *ppath.

In the Linux kernel, the following vulnerability has been resolved: nfc: nxp-nci: Fix potential memory leak in nxp_nci_send() nxp_nci_send() will call nxp_nci_i2c_write(), and only free skb when nxp_nci_i2c_write() failed. However, even if the nxp_nci_i2c_write() run succeeds, the skb will not be freed in nxp_nci_i2c_write(). As the result, the skb will memleak. nxp_nci_send() should also free the skb when nxp_nci_i2c_write() succeeds.

In the Linux kernel, the following vulnerability has been resolved: l2tp: prevent possible tunnel refcount underflow When a session is created, it sets a backpointer to its tunnel. When the session refcount drops to 0, l2tp_session_free drops the tunnel refcount if session->tunnel is non-NULL. However, session->tunnel is set in l2tp_session_create, before the tunnel refcount is incremented by l2tp_session_register, which leaves a small window where session->tunnel is non-NULL when the tunnel refcount hasn't been bumped. Moving the assignment to l2tp_session_register is trivial but l2tp_session_create calls l2tp_session_set_header_len which uses session->tunnel to get the tunnel's encap. Add an encap arg to l2tp_session_set_header_len to avoid using session->tunnel. If l2tpv3 sessions have colliding IDs, it is possible for l2tp_v3_session_get to race with l2tp_session_register and fetch a session which doesn't yet have session->tunnel set. Add a check for this case.

In the Linux kernel, the following vulnerability has been resolved: net: arc: fix the device for dma_map_single/dma_unmap_single The ndev->dev and pdev->dev aren't the same device, use ndev->dev.parent which has dma_mask, ndev->dev.parent is just pdev->dev. Or it would cause the following issue: [ 39.933526] ------------[ cut here ]------------ [ 39.938414] WARNING: CPU: 1 PID: 501 at kernel/dma/mapping.c:149 dma_map_page_attrs+0x90/0x1f8