In the Linux kernel, the following vulnerability has been resolved: HID: apple: avoid memory leak in apple_report_fixup() The apple_report_fixup() function was returning a newly kmemdup()-allocated buffer, but never freeing it. The caller of report_fixup() does not take ownership of the returned pointer, but it *is* permitted to return a sub-portion of the input rdesc, whose lifetime is managed by the caller.

In the Linux kernel, the following vulnerability has been resolved: thermal: core: Free tzp copy along with the thermal zone The object pointed to by tz->tzp may still be accessed after being freed in thermal_zone_device_unregister(), so move the freeing of it to the point after the removal completion has been completed at which it cannot be accessed any more.

In the Linux kernel, the following vulnerability has been resolved: PCI: endpoint: pci-epf-vntb: Remove duplicate resource teardown epf_ntb_epc_destroy() duplicates the teardown that the caller is supposed to perform later. This leads to an oops when .allow_link fails or when .drop_link is performed. The following is an example oops of the former case: Unable to handle kernel paging request at virtual address dead000000000108 [...] [dead000000000108] address between user and kernel address ranges Internal error: Oops: 0000000096000044 [#1] SMP [...] Call trace: pci_epc_remove_epf+0x78/0xe0 (P) pci_primary_epc_epf_link+0x88/0xa8 configfs_symlink+0x1f4/0x5a0 vfs_symlink+0x134/0x1d8 do_symlinkat+0x88/0x138 __arm64_sys_symlinkat+0x74/0xe0 [...] Remove the helper, and drop pci_epc_put(). EPC device refcounting is tied to the configfs EPC group lifetime, and pci_epc_put() in the .drop_link path is sufficient.

In the Linux kernel, the following vulnerability has been resolved: mm/damon/sysfs: check contexts->nr in repeat_call_fn damon_sysfs_repeat_call_fn() calls damon_sysfs_upd_tuned_intervals(), damon_sysfs_upd_schemes_stats(), and damon_sysfs_upd_schemes_effective_quotas() without checking contexts->nr. If nr_contexts is set to 0 via sysfs while DAMON is running, these functions dereference contexts_arr[0] and cause a NULL pointer dereference. Add the missing check. For example, the issue can be reproduced using DAMON sysfs interface and DAMON user-space tool (damo) [1] like below. $ sudo damo start --refresh_interval 1s $ echo 0 | sudo tee \ /sys/kernel/mm/damon/admin/kdamonds/0/contexts/nr_contexts

In the Linux kernel, the following vulnerability has been resolved: fbcon: Fix a NULL pointer dereference issue in fbcon_putcs syzbot has found a NULL pointer dereference bug in fbcon. Here is the simplified C reproducer: struct param { uint8_t type; struct tiocl_selection ts; }; int main() { struct fb_con2fbmap con2fb; struct param param; int fd = open("/dev/fb1", 0, 0); con2fb.console = 0x19; con2fb.framebuffer = 0; ioctl(fd, FBIOPUT_CON2FBMAP, &con2fb); param.type = 2; param.ts.xs = 0; param.ts.ys = 0; param.ts.xe = 0; param.ts.ye = 0; param.ts.sel_mode = 0; int fd1 = open("/dev/tty1", O_RDWR, 0); ioctl(fd1, TIOCLINUX, &param); con2fb.console = 1; con2fb.framebuffer = 0; ioctl(fd, FBIOPUT_CON2FBMAP, &con2fb); return 0; } After calling ioctl(fd1, TIOCLINUX, &param), the subsequent ioctl(fd, FBIOPUT_CON2FBMAP, &con2fb) causes the kernel to follow a different execution path: set_con2fb_map -> con2fb_init_display -> fbcon_set_disp -> redraw_screen -> hide_cursor -> clear_selection -> highlight -> invert_screen -> do_update_region -> fbcon_putcs -> ops->putcs Since ops->putcs is a NULL pointer, this leads to a kernel panic. To prevent this, we need to call set_blitting_type() within set_con2fb_map() to properly initialize ops->putcs.

In the Linux kernel, the following vulnerability has been resolved: ALSA: hda/cs8409: Fix possible NULL dereference If snd_hda_gen_add_kctl fails to allocate memory and returns NULL, then NULL pointer dereference will occur in the next line. Since dolphin_fixups function is a hda_fixup function which is not supposed to return any errors, add simple check before dereference, ignore the fail. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: secretmem: disable memfd_secret() if arch cannot set direct map Return -ENOSYS from memfd_secret() syscall if !can_set_direct_map(). This is the case for example on some arm64 configurations, where marking 4k PTEs in the direct map not present can only be done if the direct map is set up at 4k granularity in the first place (as ARM's break-before-make semantics do not easily allow breaking apart large/gigantic pages). More precisely, on arm64 systems with !can_set_direct_map(), set_direct_map_invalid_noflush() is a no-op, however it returns success (0) instead of an error. This means that memfd_secret will seemingly "work" (e.g. syscall succeeds, you can mmap the fd and fault in pages), but it does not actually achieve its goal of removing its memory from the direct map. Note that with this patch, memfd_secret() will start erroring on systems where can_set_direct_map() returns false (arm64 with CONFIG_RODATA_FULL_DEFAULT_ENABLED=n, CONFIG_DEBUG_PAGEALLOC=n and CONFIG_KFENCE=n), but that still seems better than the current silent failure. Since CONFIG_RODATA_FULL_DEFAULT_ENABLED defaults to 'y', most arm64 systems actually have a working memfd_secret() and aren't be affected. From going through the iterations of the original memfd_secret patch series, it seems that disabling the syscall in these scenarios was the intended behavior [1] (preferred over having set_direct_map_invalid_noflush return an error as that would result in SIGBUSes at page-fault time), however the check for it got dropped between v16 [2] and v17 [3], when secretmem moved away from CMA allocations. [1]: https://lore.kernel.org/lkml/20201124164930.GK8537@kernel.org/ [2]: https://lore.kernel.org/lkml/20210121122723.3446-11-rppt@kernel.org/#t [3]: https://lore.kernel.org/lkml/20201125092208.12544-10-rppt@kernel.org/

In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum_ipip: Fix memory leak when changing remote IPv6 address The device stores IPv6 addresses that are used for encapsulation in linear memory that is managed by the driver. Changing the remote address of an ip6gre net device never worked properly, but since cited commit the following reproducer [1] would result in a warning [2] and a memory leak [3]. The problem is that the new remote address is never added by the driver to its hash table (and therefore the device) and the old address is never removed from it. Fix by programming the new address when the configuration of the ip6gre net device changes and removing the old one. If the address did not change, then the above would result in increasing the reference count of the address and then decreasing it. [1] # ip link add name bla up type ip6gre local 2001:db8:1::1 remote 2001:db8:2::1 tos inherit ttl inherit # ip link set dev bla type ip6gre remote 2001:db8:3::1 # ip link del dev bla # devlink dev reload pci/0000:01:00.0 [2] WARNING: CPU: 0 PID: 1682 at drivers/net/ethernet/mellanox/mlxsw/spectrum.c:3002 mlxsw_sp_ipv6_addr_put+0x140/0x1d0 Modules linked in: CPU: 0 UID: 0 PID: 1682 Comm: ip Not tainted 6.12.0-rc3-custom-g86b5b55bc835 #151 Hardware name: Nvidia SN5600/VMOD0013, BIOS 5.13 05/31/2023 RIP: 0010:mlxsw_sp_ipv6_addr_put+0x140/0x1d0 [...] Call Trace: <TASK> mlxsw_sp_router_netdevice_event+0x55f/0x1240 notifier_call_chain+0x5a/0xd0 call_netdevice_notifiers_info+0x39/0x90 unregister_netdevice_many_notify+0x63e/0x9d0 rtnl_dellink+0x16b/0x3a0 rtnetlink_rcv_msg+0x142/0x3f0 netlink_rcv_skb+0x50/0x100 netlink_unicast+0x242/0x390 netlink_sendmsg+0x1de/0x420 ____sys_sendmsg+0x2bd/0x320 ___sys_sendmsg+0x9a/0xe0 __sys_sendmsg+0x7a/0xd0 do_syscall_64+0x9e/0x1a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f [3] unreferenced object 0xffff898081f597a0 (size 32): comm "ip", pid 1626, jiffies 4294719324 hex dump (first 32 bytes): 20 01 0d b8 00 02 00 00 00 00 00 00 00 00 00 01 ............... 21 49 61 83 80 89 ff ff 00 00 00 00 01 00 00 00 !Ia............. backtrace (crc fd9be911): [<00000000df89c55d>] __kmalloc_cache_noprof+0x1da/0x260 [<00000000ff2a1ddb>] mlxsw_sp_ipv6_addr_kvdl_index_get+0x281/0x340 [<000000009ddd445d>] mlxsw_sp_router_netdevice_event+0x47b/0x1240 [<00000000743e7757>] notifier_call_chain+0x5a/0xd0 [<000000007c7b9e13>] call_netdevice_notifiers_info+0x39/0x90 [<000000002509645d>] register_netdevice+0x5f7/0x7a0 [<00000000c2e7d2a9>] ip6gre_newlink_common.isra.0+0x65/0x130 [<0000000087cd6d8d>] ip6gre_newlink+0x72/0x120 [<000000004df7c7cc>] rtnl_newlink+0x471/0xa20 [<0000000057ed632a>] rtnetlink_rcv_msg+0x142/0x3f0 [<0000000032e0d5b5>] netlink_rcv_skb+0x50/0x100 [<00000000908bca63>] netlink_unicast+0x242/0x390 [<00000000cdbe1c87>] netlink_sendmsg+0x1de/0x420 [<0000000011db153e>] ____sys_sendmsg+0x2bd/0x320 [<000000003b6d53eb>] ___sys_sendmsg+0x9a/0xe0 [<00000000cae27c62>] __sys_sendmsg+0x7a/0xd0

In the Linux kernel, the following vulnerability has been resolved: resource,kexec: walk_system_ram_res_rev must retain resource flags walk_system_ram_res_rev() erroneously discards resource flags when passing the information to the callback. This causes systems with IORESOURCE_SYSRAM_DRIVER_MANAGED memory to have these resources selected during kexec to store kexec buffers if that memory happens to be at placed above normal system ram. This leads to undefined behavior after reboot. If the kexec buffer is never touched, nothing happens. If the kexec buffer is touched, it could lead to a crash (like below) or undefined behavior. Tested on a system with CXL memory expanders with driver managed memory, TPM enabled, and CONFIG_IMA_KEXEC=y. Adding printk's showed the flags were being discarded and as a result the check for IORESOURCE_SYSRAM_DRIVER_MANAGED passes. find_next_iomem_res: name(System RAM (kmem)) start(10000000000) end(1034fffffff) flags(83000200) locate_mem_hole_top_down: start(10000000000) end(1034fffffff) flags(0) [.] BUG: unable to handle page fault for address: ffff89834ffff000 [.] #PF: supervisor read access in kernel mode [.] #PF: error_code(0x0000) - not-present page [.] PGD c04c8bf067 P4D c04c8bf067 PUD c04c8be067 PMD 0 [.] Oops: 0000 [#1] SMP [.] RIP: 0010:ima_restore_measurement_list+0x95/0x4b0 [.] RSP: 0018:ffffc900000d3a80 EFLAGS: 00010286 [.] RAX: 0000000000001000 RBX: 0000000000000000 RCX: ffff89834ffff000 [.] RDX: 0000000000000018 RSI: ffff89834ffff000 RDI: ffff89834ffff018 [.] RBP: ffffc900000d3ba0 R08: 0000000000000020 R09: ffff888132b8a900 [.] R10: 4000000000000000 R11: 000000003a616d69 R12: 0000000000000000 [.] R13: ffffffff8404ac28 R14: 0000000000000000 R15: ffff89834ffff000 [.] FS: 0000000000000000(0000) GS:ffff893d44640000(0000) knlGS:0000000000000000 [.] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [.] ata5: SATA link down (SStatus 0 SControl 300) [.] CR2: ffff89834ffff000 CR3: 000001034d00f001 CR4: 0000000000770ef0 [.] PKRU: 55555554 [.] Call Trace: [.] <TASK> [.] ? __die+0x78/0xc0 [.] ? page_fault_oops+0x2a8/0x3a0 [.] ? exc_page_fault+0x84/0x130 [.] ? asm_exc_page_fault+0x22/0x30 [.] ? ima_restore_measurement_list+0x95/0x4b0 [.] ? template_desc_init_fields+0x317/0x410 [.] ? crypto_alloc_tfm_node+0x9c/0xc0 [.] ? init_ima_lsm+0x30/0x30 [.] ima_load_kexec_buffer+0x72/0xa0 [.] ima_init+0x44/0xa0 [.] __initstub__kmod_ima__373_1201_init_ima7+0x1e/0xb0 [.] ? init_ima_lsm+0x30/0x30 [.] do_one_initcall+0xad/0x200 [.] ? idr_alloc_cyclic+0xaa/0x110 [.] ? new_slab+0x12c/0x420 [.] ? new_slab+0x12c/0x420 [.] ? number+0x12a/0x430 [.] ? sysvec_apic_timer_interrupt+0xa/0x80 [.] ? asm_sysvec_apic_timer_interrupt+0x16/0x20 [.] ? parse_args+0xd4/0x380 [.] ? parse_args+0x14b/0x380 [.] kernel_init_freeable+0x1c1/0x2b0 [.] ? rest_init+0xb0/0xb0 [.] kernel_init+0x16/0x1a0 [.] ret_from_fork+0x2f/0x40 [.] ? rest_init+0xb0/0xb0 [.] ret_from_fork_asm+0x11/0x20 [.] </TASK>

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_ncm: validate minimum block_len in ncm_unwrap_ntb() The block_len read from the host-supplied NTB header is checked against ntb_max but has no lower bound. When block_len is smaller than opts->ndp_size, the bounds check of: ndp_index > (block_len - opts->ndp_size) will underflow producing a huge unsigned value that ndp_index can never exceed, defeating the check entirely. The same underflow occurs in the datagram index checks against block_len - opts->dpe_size. With those checks neutered, a malicious USB host can choose ndp_index and datagram offsets that point past the actual transfer, and the skb_put_data() copies adjacent kernel memory into the network skb. Fix this by rejecting block lengths that cannot hold at least the NTB header plus one NDP. This will make block_len - opts->ndp_size and block_len - opts->dpe_size both well-defined. Commit 8d2b1a1ec9f5 ("CDC-NCM: avoid overflow in sanity checking") fixed a related class of issues on the host side of NCM.

In the Linux kernel, the following vulnerability has been resolved: fsl/fman: Fix refcount handling of fman-related devices In mac_probe() there are multiple calls to of_find_device_by_node(), fman_bind() and fman_port_bind() which takes references to of_dev->dev. Not all references taken by these calls are released later on error path in mac_probe() and in mac_remove() which lead to reference leaks. Add references release.

In the Linux kernel, the following vulnerability has been resolved: fbdev: efifb: Register sysfs groups through driver core The driver core can register and cleanup sysfs groups already. Make use of that functionality to simplify the error handling and cleanup. Also avoid a UAF race during unregistering where the sysctl attributes were usable after the info struct was freed.

In the Linux kernel, the following vulnerability has been resolved: ocfs2: pass u64 to ocfs2_truncate_inline maybe overflow Syzbot reported a kernel BUG in ocfs2_truncate_inline. There are two reasons for this: first, the parameter value passed is greater than ocfs2_max_inline_data_with_xattr, second, the start and end parameters of ocfs2_truncate_inline are "unsigned int". So, we need to add a sanity check for byte_start and byte_len right before ocfs2_truncate_inline() in ocfs2_remove_inode_range(), if they are greater than ocfs2_max_inline_data_with_xattr return -EINVAL.

In the Linux kernel, the following vulnerability has been resolved: net: test for not too small csum_start in virtio_net_hdr_to_skb() syzbot was able to trigger this warning [1], after injecting a malicious packet through af_packet, setting skb->csum_start and thus the transport header to an incorrect value. We can at least make sure the transport header is after the end of the network header (with a estimated minimal size). [1] [ 67.873027] skb len=4096 headroom=16 headlen=14 tailroom=0 mac=(-1,-1) mac_len=0 net=(16,-6) trans=10 shinfo(txflags=0 nr_frags=1 gso(size=0 type=0 segs=0)) csum(0xa start=10 offset=0 ip_summed=3 complete_sw=0 valid=0 level=0) hash(0x0 sw=0 l4=0) proto=0x0800 pkttype=0 iif=0 priority=0x0 mark=0x0 alloc_cpu=10 vlan_all=0x0 encapsulation=0 inner(proto=0x0000, mac=0, net=0, trans=0) [ 67.877172] dev name=veth0_vlan feat=0x000061164fdd09e9 [ 67.877764] sk family=17 type=3 proto=0 [ 67.878279] skb linear: 00000000: 00 00 10 00 00 00 00 00 0f 00 00 00 08 00 [ 67.879128] skb frag: 00000000: 0e 00 07 00 00 00 28 00 08 80 1c 00 04 00 00 02 [ 67.879877] skb frag: 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.880647] skb frag: 00000020: 00 00 02 00 00 00 08 00 1b 00 00 00 00 00 00 00 [ 67.881156] skb frag: 00000030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.881753] skb frag: 00000040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.882173] skb frag: 00000050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.882790] skb frag: 00000060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.883171] skb frag: 00000070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.883733] skb frag: 00000080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.884206] skb frag: 00000090: 00 00 00 00 00 00 00 00 00 00 69 70 76 6c 61 6e [ 67.884704] skb frag: 000000a0: 31 00 00 00 00 00 00 00 00 00 2b 00 00 00 00 00 [ 67.885139] skb frag: 000000b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.885677] skb frag: 000000c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.886042] skb frag: 000000d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.886408] skb frag: 000000e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.887020] skb frag: 000000f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.887384] skb frag: 00000100: 00 00 [ 67.887878] ------------[ cut here ]------------ [ 67.887908] offset (-6) >= skb_headlen() (14) [ 67.888445] WARNING: CPU: 10 PID: 2088 at net/core/dev.c:3332 skb_checksum_help (net/core/dev.c:3332 (discriminator 2)) [ 67.889353] Modules linked in: macsec macvtap macvlan hsr wireguard curve25519_x86_64 libcurve25519_generic libchacha20poly1305 chacha_x86_64 libchacha poly1305_x86_64 dummy bridge sr_mod cdrom evdev pcspkr i2c_piix4 9pnet_virtio 9p 9pnet netfs [ 67.890111] CPU: 10 UID: 0 PID: 2088 Comm: b363492833 Not tainted 6.11.0-virtme #1011 [ 67.890183] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 67.890309] RIP: 0010:skb_checksum_help (net/core/dev.c:3332 (discriminator 2)) [ 67.891043] Call Trace: [ 67.891173] <TASK> [ 67.891274] ? __warn (kernel/panic.c:741) [ 67.891320] ? skb_checksum_help (net/core/dev.c:3332 (discriminator 2)) [ 67.891333] ? report_bug (lib/bug.c:180 lib/bug.c:219) [ 67.891348] ? handle_bug (arch/x86/kernel/traps.c:239) [ 67.891363] ? exc_invalid_op (arch/x86/kernel/traps.c:260 (discriminator 1)) [ 67.891372] ? asm_exc_invalid_op (./arch/x86/include/asm/idtentry.h:621) [ 67.891388] ? skb_checksum_help (net/core/dev.c:3332 (discriminator 2)) [ 67.891399] ? skb_checksum_help (net/core/dev.c:3332 (discriminator 2)) [ 67.891416] ip_do_fragment (net/ipv4/ip_output.c:777 (discriminator 1)) [ 67.891448] ? __ip_local_out (./include/linux/skbuff.h:1146 ./include/net/l3mdev.h:196 ./include/net/l3mdev.h:213 ne ---truncated---

In the Linux kernel, the following vulnerability has been resolved: xfrm: clear trailing padding in build_polexpire() build_expire() clears the trailing padding bytes of struct xfrm_user_expire after setting the hard field via memset_after(), but the analogous function build_polexpire() does not do this for struct xfrm_user_polexpire. The padding bytes after the __u8 hard field are left uninitialized from the heap allocation, and are then sent to userspace via netlink multicast to XFRMNLGRP_EXPIRE listeners, leaking kernel heap memory contents. Add the missing memset_after() call, matching build_expire().

In the Linux kernel, the following vulnerability has been resolved: tracing/probes: Fix MAX_TRACE_ARGS limit handling When creating a trace_probe we would set nr_args prior to truncating the arguments to MAX_TRACE_ARGS. However, we would only initialize arguments up to the limit. This caused invalid memory access when attempting to set up probes with more than 128 fetchargs. BUG: kernel NULL pointer dereference, address: 0000000000000020 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] PREEMPT SMP PTI CPU: 0 UID: 0 PID: 1769 Comm: cat Not tainted 6.11.0-rc7+ #8 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-1.fc39 04/01/2014 RIP: 0010:__set_print_fmt+0x134/0x330 Resolve the issue by applying the MAX_TRACE_ARGS limit earlier. Return an error when there are too many arguments instead of silently truncating.

In the Linux kernel, the following vulnerability has been resolved: io_uring: check if we need to reschedule during overflow flush In terms of normal application usage, this list will always be empty. And if an application does overflow a bit, it'll have a few entries. However, nothing obviously prevents syzbot from running a test case that generates a ton of overflow entries, and then flushing them can take quite a while. Check for needing to reschedule while flushing, and drop our locks and do so if necessary. There's no state to maintain here as overflows always prune from head-of-list, hence it's fine to drop and reacquire the locks at the end of the loop.

In the Linux kernel, the following vulnerability has been resolved: gfs2: fix double destroy_workqueue error When gfs2_fill_super() fails, destroy_workqueue() is called within gfs2_gl_hash_clear(), and the subsequent code path calls destroy_workqueue() on the same work queue again. This issue can be fixed by setting the work queue pointer to NULL after the first destroy_workqueue() call and checking for a NULL pointer before attempting to destroy the work queue again.

In the Linux kernel, the following vulnerability has been resolved: scsi: wd33c93: Don't use stale scsi_pointer value A regression was introduced with commit dbb2da557a6a ("scsi: wd33c93: Move the SCSI pointer to private command data") which results in an oops in wd33c93_intr(). That commit added the scsi_pointer variable and initialized it from hostdata->connected. However, during selection, hostdata->connected is not yet valid. Fix this by getting the current scsi_pointer from hostdata->selecting.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add null check for head_pipe in dcn201_acquire_free_pipe_for_layer This commit addresses a potential null pointer dereference issue in the `dcn201_acquire_free_pipe_for_layer` function. The issue could occur when `head_pipe` is null. The fix adds a check to ensure `head_pipe` is not null before asserting it. If `head_pipe` is null, the function returns NULL to prevent a potential null pointer dereference. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn201/dcn201_resource.c:1016 dcn201_acquire_free_pipe_for_layer() error: we previously assumed 'head_pipe' could be null (see line 1010)

In the Linux kernel, the following vulnerability has been resolved: thermal: intel: int340x: processor: Fix warning during module unload The processor_thermal driver uses pcim_device_enable() to enable a PCI device, which means the device will be automatically disabled on driver detach. Thus there is no need to call pci_disable_device() again on it. With recent PCI device resource management improvements, e.g. commit f748a07a0b64 ("PCI: Remove legacy pcim_release()"), this problem is exposed and triggers the warining below. [ 224.010735] proc_thermal_pci 0000:00:04.0: disabling already-disabled device [ 224.010747] WARNING: CPU: 8 PID: 4442 at drivers/pci/pci.c:2250 pci_disable_device+0xe5/0x100 ... [ 224.010844] Call Trace: [ 224.010845] <TASK> [ 224.010847] ? show_regs+0x6d/0x80 [ 224.010851] ? __warn+0x8c/0x140 [ 224.010854] ? pci_disable_device+0xe5/0x100 [ 224.010856] ? report_bug+0x1c9/0x1e0 [ 224.010859] ? handle_bug+0x46/0x80 [ 224.010862] ? exc_invalid_op+0x1d/0x80 [ 224.010863] ? asm_exc_invalid_op+0x1f/0x30 [ 224.010867] ? pci_disable_device+0xe5/0x100 [ 224.010869] ? pci_disable_device+0xe5/0x100 [ 224.010871] ? kfree+0x21a/0x2b0 [ 224.010873] pcim_disable_device+0x20/0x30 [ 224.010875] devm_action_release+0x16/0x20 [ 224.010878] release_nodes+0x47/0xc0 [ 224.010880] devres_release_all+0x9f/0xe0 [ 224.010883] device_unbind_cleanup+0x12/0x80 [ 224.010885] device_release_driver_internal+0x1ca/0x210 [ 224.010887] driver_detach+0x4e/0xa0 [ 224.010889] bus_remove_driver+0x6f/0xf0 [ 224.010890] driver_unregister+0x35/0x60 [ 224.010892] pci_unregister_driver+0x44/0x90 [ 224.010894] proc_thermal_pci_driver_exit+0x14/0x5f0 [processor_thermal_device_pci] ... [ 224.010921] ---[ end trace 0000000000000000 ]--- Remove the excess pci_disable_device() calls. [ rjw: Subject and changelog edits ]

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_hid: don't call cdev_init while cdev in use When calling unbind, then bind again, cdev_init reinitialized the cdev, even though there may still be references to it. That's the case when the /dev/hidg* device is still opened. This obviously unsafe behavior like oopes. This fixes this by using cdev_alloc to put the cdev on the heap. That way, we can simply allocate a new one in hidg_bind.

In the Linux kernel, the following vulnerability has been resolved: mptcp: handle consistently DSS corruption Bugged peer implementation can send corrupted DSS options, consistently hitting a few warning in the data path. Use DEBUG_NET assertions, to avoid the splat on some builds and handle consistently the error, dumping related MIBs and performing fallback and/or reset according to the subflow type.

In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Fix NULL pointer derefernce in hns_roce_map_mr_sg() ib_map_mr_sg() allows ULPs to specify NULL as the sg_offset argument. The driver needs to check whether it is a NULL pointer before dereferencing it.

In the Linux kernel, the following vulnerability has been resolved: pmdomain: bcm: bcm2835-power: Increase ASB control timeout The bcm2835_asb_control() function uses a tight polling loop to wait for the ASB bridge to acknowledge a request. During intensive workloads, this handshake intermittently fails for V3D's master ASB on BCM2711, resulting in "Failed to disable ASB master for v3d" errors during runtime PM suspend. As a consequence, the failed power-off leaves V3D in a broken state, leading to bus faults or system hangs on later accesses. As the timeout is insufficient in some scenarios, increase the polling timeout from 1us to 5us, which is still negligible in the context of a power domain transition. Also, replace the open-coded ktime_get_ns()/ cpu_relax() polling loop with readl_poll_timeout_atomic().

In the Linux kernel, the following vulnerability has been resolved: net: lan966x: fix page_pool error handling in lan966x_fdma_rx_alloc_page_pool() page_pool_create() can return an ERR_PTR on failure. The return value is used unconditionally in the loop that follows, passing the error pointer through xdp_rxq_info_reg_mem_model() into page_pool_use_xdp_mem(), which dereferences it, causing a kernel oops. Add an IS_ERR check after page_pool_create() to return early on failure.

In the Linux kernel, the following vulnerability has been resolved: erofs: set fileio bio failed in short read case For file-backed mount, IO requests are handled by vfs_iocb_iter_read(). However, it can be interrupted by SIGKILL, returning the number of bytes actually copied. Unused folios in bio are unexpectedly marked as uptodate. vfs_read filemap_read filemap_get_pages filemap_readahead erofs_fileio_readahead erofs_fileio_rq_submit vfs_iocb_iter_read filemap_read filemap_get_pages <= detect signal erofs_fileio_ki_complete <= set all folios uptodate This patch addresses this by setting short read bio with an error directly.

In the Linux kernel, the following vulnerability has been resolved: mm/damon/sysfs: check contexts->nr before accessing contexts_arr[0] Multiple sysfs command paths dereference contexts_arr[0] without first verifying that kdamond->contexts->nr == 1. A user can set nr_contexts to 0 via sysfs while DAMON is running, causing NULL pointer dereferences. In more detail, the issue can be triggered by privileged users like below. First, start DAMON and make contexts directory empty (kdamond->contexts->nr == 0). # damo start # cd /sys/kernel/mm/damon/admin/kdamonds/0 # echo 0 > contexts/nr_contexts Then, each of below commands will cause the NULL pointer dereference. # echo update_schemes_stats > state # echo update_schemes_tried_regions > state # echo update_schemes_tried_bytes > state # echo update_schemes_effective_quotas > state # echo update_tuned_intervals > state Guard all commands (except OFF) at the entry point of damon_sysfs_handle_cmd().

In the Linux kernel, the following vulnerability has been resolved: wifi: brcmsmac: Fix dma_free_coherent() size dma_alloc_consistent() may change the size to align it. The new size is saved in alloced. Change the free size to match the allocation size.

In the Linux kernel, the following vulnerability has been resolved: PCI: endpoint: pci-epf-vntb: Stop cmd_handler work in epf_ntb_epc_cleanup Disable the delayed work before clearing BAR mappings and doorbells to avoid running the handler after resources have been torn down. Unable to handle kernel paging request at virtual address ffff800083f46004 [...] Internal error: Oops: 0000000096000007 [#1] SMP [...] Call trace: epf_ntb_cmd_handler+0x54/0x200 [pci_epf_vntb] (P) process_one_work+0x154/0x3b0 worker_thread+0x2c8/0x400 kthread+0x148/0x210 ret_from_fork+0x10/0x20

In the Linux kernel, the following vulnerability has been resolved: mm/damon/sysfs: fix param_ctx leak on damon_sysfs_new_test_ctx() failure Patch series "mm/damon/sysfs: fix memory leak and NULL dereference issues", v4. DAMON_SYSFS can leak memory under allocation failure, and do NULL pointer dereference when a privileged user make wrong sequences of control. Fix those. This patch (of 3): When damon_sysfs_new_test_ctx() fails in damon_sysfs_commit_input(), param_ctx is leaked because the early return skips the cleanup at the out label. Destroy param_ctx before returning.

In the Linux kernel, the following vulnerability has been resolved: tracing: Drain deferred trigger frees if kthread creation fails Boot-time trigger registration can fail before the trigger-data cleanup kthread exists. Deferring those frees until late init is fine, but the post-boot fallback must still drain the deferred list if kthread creation never succeeds. Otherwise, boot-deferred nodes can accumulate on trigger_data_free_list, later frees fall back to synchronously freeing only the current object, and the older queued entries are leaked forever. To trigger this, add the following to the kernel command line: trace_event=sched_switch trace_trigger=sched_switch.traceon,sched_switch.traceon The second traceon trigger will fail and be freed. This triggers a NULL pointer dereference and crashes the kernel. Keep the deferred boot-time behavior, but when kthread creation fails, drain the whole queued list synchronously. Do the same in the late-init drain path so queued entries are not stranded there either.

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Fix shift-out-of-bounds bug Fix a shift-out-of-bounds bug reported by UBSAN when running VM with MTE enabled host kernel. UBSAN: shift-out-of-bounds in arch/arm64/kvm/sys_regs.c:1988:14 shift exponent 33 is too large for 32-bit type 'int' CPU: 26 UID: 0 PID: 7629 Comm: qemu-kvm Not tainted 6.12.0-rc2 #34 Hardware name: IEI NF5280R7/Mitchell MB, BIOS 00.00. 2024-10-12 09:28:54 10/14/2024 Call trace: dump_backtrace+0xa0/0x128 show_stack+0x20/0x38 dump_stack_lvl+0x74/0x90 dump_stack+0x18/0x28 __ubsan_handle_shift_out_of_bounds+0xf8/0x1e0 reset_clidr+0x10c/0x1c8 kvm_reset_sys_regs+0x50/0x1c8 kvm_reset_vcpu+0xec/0x2b0 __kvm_vcpu_set_target+0x84/0x158 kvm_vcpu_set_target+0x138/0x168 kvm_arch_vcpu_ioctl_vcpu_init+0x40/0x2b0 kvm_arch_vcpu_ioctl+0x28c/0x4b8 kvm_vcpu_ioctl+0x4bc/0x7a8 __arm64_sys_ioctl+0xb4/0x100 invoke_syscall+0x70/0x100 el0_svc_common.constprop.0+0x48/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x3c/0x158 el0t_64_sync_handler+0x120/0x130 el0t_64_sync+0x194/0x198

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check null pointers before using them [WHAT & HOW] These pointers are null checked previously in the same function, indicating they might be null as reported by Coverity. As a result, they need to be checked when used again. This fixes 3 FORWARD_NULL issue reported by Coverity.

In the Linux kernel, the following vulnerability has been resolved: octeon_ep: Add SKB allocation failures handling in __octep_oq_process_rx() build_skb() returns NULL in case of a memory allocation failure so handle it inside __octep_oq_process_rx() to avoid NULL pointer dereference. __octep_oq_process_rx() is called during NAPI polling by the driver. If skb allocation fails, keep on pulling packets out of the Rx DMA queue: we shouldn't break the polling immediately and thus falsely indicate to the octep_napi_poll() that the Rx pressure is going down. As there is no associated skb in this case, don't process the packets and don't push them up the network stack - they are skipped. Helper function is implemented to unmmap/flush all the fragment buffers used by the dropped packet. 'alloc_failures' counter is incremented to mark the skb allocation error in driver statistics. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add null check for 'afb' in amdgpu_dm_update_cursor (v2) This commit adds a null check for the 'afb' variable in the amdgpu_dm_update_cursor function. Previously, 'afb' was assumed to be null at line 8388, but was used later in the code without a null check. This could potentially lead to a null pointer dereference. Changes since v1: - Moved the null check for 'afb' to the line where 'afb' is used. (Alex) Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:8433 amdgpu_dm_update_cursor() error: we previously assumed 'afb' could be null (see line 8388)

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add NULL check for function pointer in dcn20_set_output_transfer_func This commit adds a null check for the set_output_gamma function pointer in the dcn20_set_output_transfer_func function. Previously, set_output_gamma was being checked for null at line 1030, but then it was being dereferenced without any null check at line 1048. This could potentially lead to a null pointer dereference error if set_output_gamma is null. To fix this, we now ensure that set_output_gamma is not null before dereferencing it. We do this by adding a null check for set_output_gamma before the call to set_output_gamma at line 1048.

In the Linux kernel, the following vulnerability has been resolved: HID: asus: avoid memory leak in asus_report_fixup() The asus_report_fixup() function was returning a newly allocated kmemdup()-allocated buffer, but never freeing it. Switch to devm_kzalloc() to ensure the memory is managed and freed automatically when the device is removed. The caller of report_fixup() does not take ownership of the returned pointer, but it is permitted to return a pointer whose lifetime is at least that of the input buffer. Also fix a harmless out-of-bounds read by copying only the original descriptor size.

In the Linux kernel, the following vulnerability has been resolved: btrfs: set BTRFS_ROOT_ORPHAN_CLEANUP during subvol create We have recently observed a number of subvolumes with broken dentries. ls-ing the parent dir looks like: drwxrwxrwt 1 root root 16 Jan 23 16:49 . drwxr-xr-x 1 root root 24 Jan 23 16:48 .. d????????? ? ? ? ? ? broken_subvol and similarly stat-ing the file fails. In this state, deleting the subvol fails with ENOENT, but attempting to create a new file or subvol over it errors out with EEXIST and even aborts the fs. Which leaves us a bit stuck. dmesg contains a single notable error message reading: "could not do orphan cleanup -2" 2 is ENOENT and the error comes from the failure handling path of btrfs_orphan_cleanup(), with the stack leading back up to btrfs_lookup(). btrfs_lookup btrfs_lookup_dentry btrfs_orphan_cleanup // prints that message and returns -ENOENT After some detailed inspection of the internal state, it became clear that: - there are no orphan items for the subvol - the subvol is otherwise healthy looking, it is not half-deleted or anything, there is no drop progress, etc. - the subvol was created a while ago and does the meaningful first btrfs_orphan_cleanup() call that sets BTRFS_ROOT_ORPHAN_CLEANUP much later. - after btrfs_orphan_cleanup() fails, btrfs_lookup_dentry() returns -ENOENT, which results in a negative dentry for the subvolume via d_splice_alias(NULL, dentry), leading to the observed behavior. The bug can be mitigated by dropping the dentry cache, at which point we can successfully delete the subvolume if we want. i.e., btrfs_lookup() btrfs_lookup_dentry() if (!sb_rdonly(inode->vfs_inode)->vfs_inode) btrfs_orphan_cleanup(sub_root) test_and_set_bit(BTRFS_ROOT_ORPHAN_CLEANUP) btrfs_search_slot() // finds orphan item for inode N ... prints "could not do orphan cleanup -2" if (inode == ERR_PTR(-ENOENT)) inode = NULL; return d_splice_alias(NULL, dentry) // NEGATIVE DENTRY for valid subvolume btrfs_orphan_cleanup() does test_and_set_bit(BTRFS_ROOT_ORPHAN_CLEANUP) on the root when it runs, so it cannot run more than once on a given root, so something else must run concurrently. However, the obvious routes to deleting an orphan when nlinks goes to 0 should not be able to run without first doing a lookup into the subvolume, which should run btrfs_orphan_cleanup() and set the bit. The final important observation is that create_subvol() calls d_instantiate_new() but does not set BTRFS_ROOT_ORPHAN_CLEANUP, so if the dentry cache gets dropped, the next lookup into the subvolume will make a real call into btrfs_orphan_cleanup() for the first time. This opens up the possibility of concurrently deleting the inode/orphan items but most typical evict() paths will be holding a reference on the parent dentry (child dentry holds parent->d_lockref.count via dget in d_alloc(), released in __dentry_kill()) and prevent the parent from being removed from the dentry cache. The one exception is delayed iputs. Ordered extent creation calls igrab() on the inode. If the file is unlinked and closed while those refs are held, iput() in __dentry_kill() decrements i_count but does not trigger eviction (i_count > 0). The child dentry is freed and the subvol dentry's d_lockref.count drops to 0, making it evictable while the inode is still alive. Since there are two races (the race between writeback and unlink and the race between lookup and delayed iputs), and there are too many moving parts, the following three diagrams show the complete picture. (Only the second and third are races) Phase 1: Create Subvol in dentry cache without BTRFS_ROOT_ORPHAN_CLEANUP set btrfs_mksubvol() lookup_one_len() __lookup_slow() d_alloc_parallel() __d_alloc() // d_lockref.count = 1 create_subvol(dentry) // doesn't touch the bit.. d_instantiate_new(dentry, inode) // dentry in cache with d_lockref.c ---truncated---

In the Linux kernel, the following vulnerability has been resolved: vfio/xe: Reorganize the init to decouple migration from reset Attempting to issue reset on VF devices that don't support migration leads to the following: BUG: unable to handle page fault for address: 00000000000011f8 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 2 UID: 0 PID: 7443 Comm: xe_sriov_flr Tainted: G S U 7.0.0-rc1-lgci-xe-xe-4588-cec43d5c2696af219-nodebug+ #1 PREEMPT(lazy) Tainted: [S]=CPU_OUT_OF_SPEC, [U]=USER Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-P DDR4 RVP, BIOS RPLPFWI1.R00.4035.A00.2301200723 01/20/2023 RIP: 0010:xe_sriov_vfio_wait_flr_done+0xc/0x80 [xe] Code: ff c3 cc cc cc cc 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 41 54 53 <83> bf f8 11 00 00 02 75 61 41 89 f4 85 f6 74 52 48 8b 47 08 48 89 RSP: 0018:ffffc9000f7c39b8 EFLAGS: 00010202 RAX: ffffffffa04d8660 RBX: ffff88813e3e4000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffc9000f7c39c8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff888101a48800 R13: ffff88813e3e4150 R14: ffff888130d0d008 R15: ffff88813e3e40d0 FS: 00007877d3d0d940(0000) GS:ffff88890b6d3000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000011f8 CR3: 000000015a762000 CR4: 0000000000f52ef0 PKRU: 55555554 Call Trace: <TASK> xe_vfio_pci_reset_done+0x49/0x120 [xe_vfio_pci] pci_dev_restore+0x3b/0x80 pci_reset_function+0x109/0x140 reset_store+0x5c/0xb0 dev_attr_store+0x17/0x40 sysfs_kf_write+0x72/0x90 kernfs_fop_write_iter+0x161/0x1f0 vfs_write+0x261/0x440 ksys_write+0x69/0xf0 __x64_sys_write+0x19/0x30 x64_sys_call+0x259/0x26e0 do_syscall_64+0xcb/0x1500 ? __fput+0x1a2/0x2d0 ? fput_close_sync+0x3d/0xa0 ? __x64_sys_close+0x3e/0x90 ? x64_sys_call+0x1b7c/0x26e0 ? do_syscall_64+0x109/0x1500 ? __task_pid_nr_ns+0x68/0x100 ? __do_sys_getpid+0x1d/0x30 ? x64_sys_call+0x10b5/0x26e0 ? do_syscall_64+0x109/0x1500 ? putname+0x41/0x90 ? do_faccessat+0x1e8/0x300 ? __x64_sys_access+0x1c/0x30 ? x64_sys_call+0x1822/0x26e0 ? do_syscall_64+0x109/0x1500 ? tick_program_event+0x43/0xa0 ? hrtimer_interrupt+0x126/0x260 ? irqentry_exit+0xb2/0x710 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7877d5f1c5a4 Code: c7 00 16 00 00 00 b8 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 80 3d a5 ea 0e 00 00 74 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 55 48 89 e5 48 83 ec 20 48 89 RSP: 002b:00007fff48e5f908 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007877d5f1c5a4 RDX: 0000000000000001 RSI: 00007877d621b0c9 RDI: 0000000000000009 RBP: 0000000000000001 R08: 00005fb49113b010 R09: 0000000000000007 R10: 0000000000000000 R11: 0000000000000202 R12: 00007877d621b0c9 R13: 0000000000000009 R14: 00007fff48e5fac0 R15: 00007fff48e5fac0 </TASK> This is caused by the fact that some of the xe_vfio_pci_core_device members needed for handling reset are only initialized as part of migration init. Fix the problem by reorganizing the code to decouple VF init from migration init.

In the Linux kernel, the following vulnerability has been resolved: fbdev: udlfb: avoid divide-by-zero on FBIOPUT_VSCREENINFO Much like commit 19f953e74356 ("fbdev: fb_pm2fb: Avoid potential divide by zero error"), we also need to prevent that same crash from happening in the udlfb driver as it uses pixclock directly when dividing, which will crash.

In the Linux kernel, the following vulnerability has been resolved: HID: alps: fix NULL pointer dereference in alps_raw_event() Commit ecfa6f34492c ("HID: Add HID_CLAIMED_INPUT guards in raw_event callbacks missing them") attempted to fix up the HID drivers that had missed the previous fix that was done in 2ff5baa9b527 ("HID: appleir: Fix potential NULL dereference at raw event handle"), but the alps driver was missed. Fix this up by properly checking in the hid-alps driver that it had been claimed correctly before attempting to process the raw event.

In the Linux kernel, the following vulnerability has been resolved: ext4: don't set SB_RDONLY after filesystem errors When the filesystem is mounted with errors=remount-ro, we were setting SB_RDONLY flag to stop all filesystem modifications. We knew this misses proper locking (sb->s_umount) and does not go through proper filesystem remount procedure but it has been the way this worked since early ext2 days and it was good enough for catastrophic situation damage mitigation. Recently, syzbot has found a way (see link) to trigger warnings in filesystem freezing because the code got confused by SB_RDONLY changing under its hands. Since these days we set EXT4_FLAGS_SHUTDOWN on the superblock which is enough to stop all filesystem modifications, modifying SB_RDONLY shouldn't be needed. So stop doing that.

In the Linux kernel, the following vulnerability has been resolved: rxrpc: fix reference count leak in rxrpc_server_keyring() This patch fixes a reference count leak in rxrpc_server_keyring() by checking if rx->securities is already set.

In the Linux kernel, the following vulnerability has been resolved: xfrm: iptfs: validate inner IPv4 header length in IPTFS payload Add validation of the inner IPv4 packet tot_len and ihl fields parsed from decrypted IPTFS payloads in __input_process_payload(). A crafted ESP packet containing an inner IPv4 header with tot_len=0 causes an infinite loop: iplen=0 leads to capturelen=min(0, remaining)=0, so the data offset never advances and the while(data < tail) loop never terminates, spinning forever in softirq context. Reject inner IPv4 packets where tot_len < ihl*4 or ihl*4 < sizeof(struct iphdr), which catches both the tot_len=0 case and malformed ihl values. The normal IP stack performs this validation in ip_rcv_core(), but IPTFS extracts and processes inner packets before they reach that layer.

In the Linux kernel, the following vulnerability has been resolved: ublk: don't allow user copy for unprivileged device UBLK_F_USER_COPY requires userspace to call write() on ublk char device for filling request buffer, and unprivileged device can't be trusted. So don't allow user copy for unprivileged device.

In the Linux kernel, the following vulnerability has been resolved: cxl/region: Fix leakage in __construct_region() Failing the first sysfs_update_group() needs to explicitly kfree the resource as it is too early for cxl_region_iomem_release() to do so.

In the Linux kernel, the following vulnerability has been resolved: pinctrl: intel: platform: fix error path in device_for_each_child_node() The device_for_each_child_node() loop requires calls to fwnode_handle_put() upon early returns to decrement the refcount of the child node and avoid leaking memory if that error path is triggered. There is one early returns within that loop in intel_platform_pinctrl_prepare_community(), but fwnode_handle_put() is missing. Instead of adding the missing call, the scoped version of the loop can be used to simplify the code and avoid mistakes in the future if new early returns are added, as the child node is only used for parsing, and it is never assigned.

In the Linux kernel, the following vulnerability has been resolved: drm/xe/oa: Fix overflow in oa batch buffer By default xe_bb_create_job() appends a MI_BATCH_BUFFER_END to batch buffer, this is not a problem if batch buffer is only used once but oa reuses the batch buffer for the same metric and at each call it appends a MI_BATCH_BUFFER_END, printing the warning below and then overflowing. [ 381.072016] ------------[ cut here ]------------ [ 381.072019] xe 0000:00:02.0: [drm] Assertion `bb->len * 4 + bb_prefetch(q->gt) <= size` failed! platform: LUNARLAKE subplatform: 1 graphics: Xe2_LPG / Xe2_HPG 20.04 step B0 media: Xe2_LPM / Xe2_HPM 20.00 step B0 tile: 0 VRAM 0 B GT: 0 type 1 So here checking if batch buffer already have MI_BATCH_BUFFER_END if not append it. v2: - simply fix, suggestion from Ashutosh (cherry picked from commit 9ba0e0f30ca42a98af3689460063edfb6315718a)

In the Linux kernel, the following vulnerability has been resolved: NFC: nxp-nci: allow GPIOs to sleep Allow the firmware and enable GPIOs to sleep. This fixes a `WARN_ON' and allows the driver to operate GPIOs which are connected to I2C GPIO expanders. -- >8 -- kernel: WARNING: CPU: 3 PID: 2636 at drivers/gpio/gpiolib.c:3880 gpiod_set_value+0x88/0x98 -- >8 --