In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: Fix static_branch_dec() underflow for aql_disable. syzbot reported static_branch_dec() underflow in aql_enable_write(). [0] The problem is that aql_enable_write() does not serialise concurrent write()s to the debugfs. aql_enable_write() checks static_key_false(&aql_disable.key) and later calls static_branch_inc() or static_branch_dec(), but the state may change between the two calls. aql_disable does not need to track inc/dec. Let's use static_branch_enable() and static_branch_disable(). [0]: val == 0 WARNING: kernel/jump_label.c:311 at __static_key_slow_dec_cpuslocked.part.0+0x107/0x120 kernel/jump_label.c:311, CPU#0: syz.1.3155/20288 Modules linked in: CPU: 0 UID: 0 PID: 20288 Comm: syz.1.3155 Tainted: G U L syzkaller #0 PREEMPT(full) Tainted: [U]=USER, [L]=SOFTLOCKUP Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/24/2026 RIP: 0010:__static_key_slow_dec_cpuslocked.part.0+0x107/0x120 kernel/jump_label.c:311 Code: f2 c9 ff 5b 5d c3 cc cc cc cc e8 54 f2 c9 ff 48 89 df e8 ac f9 ff ff eb ad e8 45 f2 c9 ff 90 0f 0b 90 eb a2 e8 3a f2 c9 ff 90 <0f> 0b 90 eb 97 48 89 df e8 5c 4b 33 00 e9 36 ff ff ff 0f 1f 80 00 RSP: 0018:ffffc9000b9f7c10 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffffffff9b3e5d40 RCX: ffffffff823c57b4 RDX: ffff8880285a0000 RSI: ffffffff823c5846 RDI: ffff8880285a0000 RBP: 0000000000000000 R08: 0000000000000005 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 000000000000000a R13: 1ffff9200173ef88 R14: 0000000000000001 R15: ffffc9000b9f7e98 FS: 00007f530dd726c0(0000) GS:ffff8881245e3000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000200000001140 CR3: 000000007cc4a000 CR4: 00000000003526f0 Call Trace: <TASK> __static_key_slow_dec_cpuslocked kernel/jump_label.c:297 [inline] __static_key_slow_dec kernel/jump_label.c:321 [inline] static_key_slow_dec+0x7c/0xc0 kernel/jump_label.c:336 aql_enable_write+0x2b2/0x310 net/mac80211/debugfs.c:343 short_proxy_write+0x133/0x1a0 fs/debugfs/file.c:383 vfs_write+0x2aa/0x1070 fs/read_write.c:684 ksys_pwrite64 fs/read_write.c:793 [inline] __do_sys_pwrite64 fs/read_write.c:801 [inline] __se_sys_pwrite64 fs/read_write.c:798 [inline] __x64_sys_pwrite64+0x1eb/0x250 fs/read_write.c:798 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xc9/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f530cf9aeb9 Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f530dd72028 EFLAGS: 00000246 ORIG_RAX: 0000000000000012 RAX: ffffffffffffffda RBX: 00007f530d215fa0 RCX: 00007f530cf9aeb9 RDX: 0000000000000003 RSI: 0000000000000000 RDI: 0000000000000010 RBP: 00007f530d008c1f R08: 0000000000000000 R09: 0000000000000000 R10: 4200000000000005 R11: 0000000000000246 R12: 0000000000000000 R13: 00007f530d216038 R14: 00007f530d215fa0 R15: 00007ffde89fb978 </TASK>

In the Linux kernel, the following vulnerability has been resolved: dmaengine: qcom: bam_dma: fix runtime PM underflow Commit dbad41e7bb5f ("dmaengine: qcom: bam_dma: check if the runtime pm enabled") caused unbalanced pm_runtime_get/put() calls when the bam is controlled remotely. This commit reverts it and just enables pm_runtime in all cases, the clk_* functions already just nop when the clock is NULL. Also clean up a bit by removing unnecessary bamclk null checks.

In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Prevent some integer underflows My static checker complains that: drivers/infiniband/hw/irdma/ctrl.c:3605 irdma_sc_ceq_init() warn: can subtract underflow 'info->dev->hmc_fpm_misc.max_ceqs'? It appears that "info->dev->hmc_fpm_misc.max_ceqs" comes from the firmware in irdma_sc_parse_fpm_query_buf() so, yes, there is a chance that it could be zero. Even if we trust the firmware, it's easy enough to change the condition just as a hardenning measure.

In the Linux kernel, the following vulnerability has been resolved: NFSD: Fix ia_size underflow iattr::ia_size is a loff_t, which is a signed 64-bit type. NFSv3 and NFSv4 both define file size as an unsigned 64-bit type. Thus there is a range of valid file size values an NFS client can send that is already larger than Linux can handle. Currently decode_fattr4() dumps a full u64 value into ia_size. If that value happens to be larger than S64_MAX, then ia_size underflows. I'm about to fix up the NFSv3 behavior as well, so let's catch the underflow in the common code path: nfsd_setattr().

In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: fix potential underflow in virtio_transport_get_credit() The credit calculation in virtio_transport_get_credit() uses unsigned arithmetic: ret = vvs->peer_buf_alloc - (vvs->tx_cnt - vvs->peer_fwd_cnt); If the peer shrinks its advertised buffer (peer_buf_alloc) while bytes are in flight, the subtraction can underflow and produce a large positive value, potentially allowing more data to be queued than the peer can handle. Reuse virtio_transport_has_space() which already handles this case and add a comment to make it clear why we are doing that. [Stefano: use virtio_transport_has_space() instead of duplicating the code] [Stefano: tweak the commit message]

In the Linux kernel, the following vulnerability has been resolved: media: chips-media: wave5: Fix PM runtime usage count underflow Replace pm_runtime_put_sync() with pm_runtime_dont_use_autosuspend() in the remove path to properly pair with pm_runtime_use_autosuspend() from probe. This allows pm_runtime_disable() to handle reference count cleanup correctly regardless of current suspend state. The driver calls pm_runtime_put_sync() unconditionally in remove, but the device may already be suspended due to autosuspend configured in probe. When autosuspend has already suspended the device, the usage count is 0, and pm_runtime_put_sync() decrements it to -1. This causes the following warning on module unload: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 963 at kernel/kthread.c:1430 kthread_destroy_worker+0x84/0x98 ... vdec 30210000.video-codec: Runtime PM usage count underflow!

In the Linux kernel, the following vulnerability has been resolved: arm64: tlb: Fix TLBI RANGE operand KVM/arm64 relies on TLBI RANGE feature to flush TLBs when the dirty pages are collected by VMM and the page table entries become write protected during live migration. Unfortunately, the operand passed to the TLBI RANGE instruction isn't correctly sorted out due to the commit 117940aa6e5f ("KVM: arm64: Define kvm_tlb_flush_vmid_range()"). It leads to crash on the destination VM after live migration because TLBs aren't flushed completely and some of the dirty pages are missed. For example, I have a VM where 8GB memory is assigned, starting from 0x40000000 (1GB). Note that the host has 4KB as the base page size. In the middile of migration, kvm_tlb_flush_vmid_range() is executed to flush TLBs. It passes MAX_TLBI_RANGE_PAGES as the argument to __kvm_tlb_flush_vmid_range() and __flush_s2_tlb_range_op(). SCALE#3 and NUM#31, corresponding to MAX_TLBI_RANGE_PAGES, isn't supported by __TLBI_RANGE_NUM(). In this specific case, -1 has been returned from __TLBI_RANGE_NUM() for SCALE#3/2/1/0 and rejected by the loop in the __flush_tlb_range_op() until the variable @scale underflows and becomes -9, 0xffff708000040000 is set as the operand. The operand is wrong since it's sorted out by __TLBI_VADDR_RANGE() according to invalid @scale and @num. Fix it by extending __TLBI_RANGE_NUM() to support the combination of SCALE#3 and NUM#31. With the changes, [-1 31] instead of [-1 30] can be returned from the macro, meaning the TLBs for 0x200000 pages in the above example can be flushed in one shoot with SCALE#3 and NUM#31. The macro TLBI_RANGE_MASK is dropped since no one uses it any more. The comments are also adjusted accordingly.

In the Linux kernel, the following vulnerability has been resolved: tpm: efi: Use local variable for calculating final log size When tpm_read_log_efi is called multiple times, which happens when one loads and unloads a TPM2 driver multiple times, then the global variable efi_tpm_final_log_size will at some point become a negative number due to the subtraction of final_events_preboot_size occurring each time. Use a local variable to avoid this integer underflow. The following issue is now resolved: Mar 8 15:35:12 hibinst kernel: Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Mar 8 15:35:12 hibinst kernel: Workqueue: tpm-vtpm vtpm_proxy_work [tpm_vtpm_proxy] Mar 8 15:35:12 hibinst kernel: RIP: 0010:__memcpy+0x12/0x20 Mar 8 15:35:12 hibinst kernel: Code: 00 b8 01 00 00 00 85 d2 74 0a c7 05 44 7b ef 00 0f 00 00 00 c3 cc cc cc 66 66 90 66 90 48 89 f8 48 89 d1 48 c1 e9 03 83 e2 07 <f3> 48 a5 89 d1 f3 a4 c3 66 0f 1f 44 00 00 48 89 f8 48 89 d1 f3 a4 Mar 8 15:35:12 hibinst kernel: RSP: 0018:ffff9ac4c0fcfde0 EFLAGS: 00010206 Mar 8 15:35:12 hibinst kernel: RAX: ffff88f878cefed5 RBX: ffff88f878ce9000 RCX: 1ffffffffffffe0f Mar 8 15:35:12 hibinst kernel: RDX: 0000000000000003 RSI: ffff9ac4c003bff9 RDI: ffff88f878cf0e4d Mar 8 15:35:12 hibinst kernel: RBP: ffff9ac4c003b000 R08: 0000000000001000 R09: 000000007e9d6073 Mar 8 15:35:12 hibinst kernel: R10: ffff9ac4c003b000 R11: ffff88f879ad3500 R12: 0000000000000ed5 Mar 8 15:35:12 hibinst kernel: R13: ffff88f878ce9760 R14: 0000000000000002 R15: ffff88f77de7f018 Mar 8 15:35:12 hibinst kernel: FS: 0000000000000000(0000) GS:ffff88f87bd00000(0000) knlGS:0000000000000000 Mar 8 15:35:12 hibinst kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Mar 8 15:35:12 hibinst kernel: CR2: ffff9ac4c003c000 CR3: 00000001785a6004 CR4: 0000000000060ee0 Mar 8 15:35:12 hibinst kernel: Call Trace: Mar 8 15:35:12 hibinst kernel: tpm_read_log_efi+0x152/0x1a7 Mar 8 15:35:12 hibinst kernel: tpm_bios_log_setup+0xc8/0x1c0 Mar 8 15:35:12 hibinst kernel: tpm_chip_register+0x8f/0x260 Mar 8 15:35:12 hibinst kernel: vtpm_proxy_work+0x16/0x60 [tpm_vtpm_proxy] Mar 8 15:35:12 hibinst kernel: process_one_work+0x1b4/0x370 Mar 8 15:35:12 hibinst kernel: worker_thread+0x53/0x3e0 Mar 8 15:35:12 hibinst kernel: ? process_one_work+0x370/0x370

In the Linux kernel, the following vulnerability has been resolved: wifi: mt7601u: fix an integer underflow Fix an integer underflow that leads to a null pointer dereference in 'mt7601u_rx_skb_from_seg()'. The variable 'dma_len' in the URB packet could be manipulated, which could trigger an integer underflow of 'seg_len' in 'mt7601u_rx_process_seg()'. This underflow subsequently causes the 'bad_frame' checks in 'mt7601u_rx_skb_from_seg()' to be bypassed, eventually leading to a dereference of the pointer 'p', which is a null pointer. Ensure that 'dma_len' is greater than 'min_seg_len'. Found by a modified version of syzkaller. KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 0 PID: 12 Comm: ksoftirqd/0 Tainted: G W O 5.14.0+ #139 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 RIP: 0010:skb_add_rx_frag+0x143/0x370 Code: e2 07 83 c2 03 38 ca 7c 08 84 c9 0f 85 86 01 00 00 4c 8d 7d 08 44 89 68 08 48 b8 00 00 00 00 00 fc ff df 4c 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 cd 01 00 00 48 8b 45 08 a8 01 0f 85 3d 01 00 00 RSP: 0018:ffffc900000cfc90 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffff888115520dc0 RCX: 0000000000000000 RDX: 0000000000000001 RSI: ffff8881118430c0 RDI: ffff8881118430f8 RBP: 0000000000000000 R08: 0000000000000e09 R09: 0000000000000010 R10: ffff888111843017 R11: ffffed1022308602 R12: 0000000000000000 R13: 0000000000000e09 R14: 0000000000000010 R15: 0000000000000008 FS: 0000000000000000(0000) GS:ffff88811a800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000004035af40 CR3: 00000001157f2000 CR4: 0000000000750ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: mt7601u_rx_tasklet+0xc73/0x1270 ? mt7601u_submit_rx_buf.isra.0+0x510/0x510 ? tasklet_action_common.isra.0+0x79/0x2f0 tasklet_action_common.isra.0+0x206/0x2f0 __do_softirq+0x1b5/0x880 ? tasklet_unlock+0x30/0x30 run_ksoftirqd+0x26/0x50 smpboot_thread_fn+0x34f/0x7d0 ? smpboot_register_percpu_thread+0x370/0x370 kthread+0x3a1/0x480 ? set_kthread_struct+0x120/0x120 ret_from_fork+0x1f/0x30 Modules linked in: 88XXau(O) 88x2bu(O) ---[ end trace 57f34f93b4da0f9b ]--- RIP: 0010:skb_add_rx_frag+0x143/0x370 Code: e2 07 83 c2 03 38 ca 7c 08 84 c9 0f 85 86 01 00 00 4c 8d 7d 08 44 89 68 08 48 b8 00 00 00 00 00 fc ff df 4c 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 cd 01 00 00 48 8b 45 08 a8 01 0f 85 3d 01 00 00 RSP: 0018:ffffc900000cfc90 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffff888115520dc0 RCX: 0000000000000000 RDX: 0000000000000001 RSI: ffff8881118430c0 RDI: ffff8881118430f8 RBP: 0000000000000000 R08: 0000000000000e09 R09: 0000000000000010 R10: ffff888111843017 R11: ffffed1022308602 R12: 0000000000000000 R13: 0000000000000e09 R14: 0000000000000010 R15: 0000000000000008 FS: 0000000000000000(0000) GS:ffff88811a800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000004035af40 CR3: 00000001157f2000 CR4: 0000000000750ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix possible underflow for displays with large vblank [Why] Underflow observed when using a display with a large vblank region and low refresh rate [How] Simplify calculation of vblank_nom Increase value for VBlankNomDefaultUS to 800us

In the Linux kernel, the following vulnerability has been resolved: ipv6/addrconf: fix a potential refcount underflow for idev Now in addrconf_mod_rs_timer(), reference idev depends on whether rs_timer is not pending. Then modify rs_timer timeout. There is a time gap in [1], during which if the pending rs_timer becomes not pending. It will miss to hold idev, but the rs_timer is activated. Thus rs_timer callback function addrconf_rs_timer() will be executed and put idev later without holding idev. A refcount underflow issue for idev can be caused by this. if (!timer_pending(&idev->rs_timer)) in6_dev_hold(idev); <--------------[1] mod_timer(&idev->rs_timer, jiffies + when); To fix the issue, hold idev if mod_timer() return 0.

In the Linux kernel, the following vulnerability has been resolved: media: cx24116: prevent overflows on SNR calculus as reported by Coverity, if reading SNR registers fail, a negative number will be returned, causing an underflow when reading SNR registers. Prevent that.

In the Linux kernel, the following vulnerability has been resolved: net: fix crash when config small gso_max_size/gso_ipv4_max_size Config a small gso_max_size/gso_ipv4_max_size will lead to an underflow in sk_dst_gso_max_size(), which may trigger a BUG_ON crash, because sk->sk_gso_max_size would be much bigger than device limits. Call Trace: tcp_write_xmit tso_segs = tcp_init_tso_segs(skb, mss_now); tcp_set_skb_tso_segs tcp_skb_pcount_set // skb->len = 524288, mss_now = 8 // u16 tso_segs = 524288/8 = 65535 -> 0 tso_segs = DIV_ROUND_UP(skb->len, mss_now) BUG_ON(!tso_segs) Add check for the minimum value of gso_max_size and gso_ipv4_max_size.

In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: Fix OOB and integer underflow when rx packets Make sure mwifiex_process_mgmt_packet, mwifiex_process_sta_rx_packet and mwifiex_process_uap_rx_packet, mwifiex_uap_queue_bridged_pkt and mwifiex_process_rx_packet not out-of-bounds access the skb->data buffer.

In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: prime: fix refcount underflow Calling nouveau_bo_ref() on a nouveau_bo without initializing it (and hence the backing ttm_bo) leads to a refcount underflow. Instead of calling nouveau_bo_ref() in the unwind path of drm_gem_object_init(), clean things up manually. (cherry picked from commit 1b93f3e89d03cfc576636e195466a0d728ad8de5)

In the Linux kernel, the following vulnerability has been resolved: net: vlan: fix underflow for the real_dev refcnt Inject error before dev_hold(real_dev) in register_vlan_dev(), and execute the following testcase: ip link add dev dummy1 type dummy ip link add name dummy1.100 link dummy1 type vlan id 100 ip link del dev dummy1 When the dummy netdevice is removed, we will get a WARNING as following: ======================================================================= refcount_t: decrement hit 0; leaking memory. WARNING: CPU: 2 PID: 0 at lib/refcount.c:31 refcount_warn_saturate+0xbf/0x1e0 and an endless loop of: ======================================================================= unregister_netdevice: waiting for dummy1 to become free. Usage count = -1073741824 That is because dev_put(real_dev) in vlan_dev_free() be called without dev_hold(real_dev) in register_vlan_dev(). It makes the refcnt of real_dev underflow. Move the dev_hold(real_dev) to vlan_dev_init() which is the call-back of ndo_init(). That makes dev_hold() and dev_put() for vlan's real_dev symmetrical.

In the Linux kernel, the following vulnerability has been resolved: i40e: fix MMIO write access to an invalid page in i40e_clear_hw When the device sends a specific input, an integer underflow can occur, leading to MMIO write access to an invalid page. Prevent the integer underflow by changing the type of related variables.

In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix error flow upon firmware failure for RQ destruction Upon RQ destruction if the firmware command fails which is the last resource to be destroyed some SW resources were already cleaned regardless of the failure. Now properly rollback the object to its original state upon such failure. In order to avoid a use-after free in case someone tries to destroy the object again, which results in the following kernel trace: refcount_t: underflow; use-after-free. WARNING: CPU: 0 PID: 37589 at lib/refcount.c:28 refcount_warn_saturate+0xf4/0x148 Modules linked in: rdma_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) ib_umad(OE) mlx5_ib(OE) rfkill mlx5_core(OE) mlxdevm(OE) ib_uverbs(OE) ib_core(OE) psample mlxfw(OE) mlx_compat(OE) macsec tls pci_hyperv_intf sunrpc vfat fat virtio_net net_failover failover fuse loop nfnetlink vsock_loopback vmw_vsock_virtio_transport_common vmw_vsock_vmci_transport vmw_vmci vsock xfs crct10dif_ce ghash_ce sha2_ce sha256_arm64 sha1_ce virtio_console virtio_gpu virtio_blk virtio_dma_buf virtio_mmio dm_mirror dm_region_hash dm_log dm_mod xpmem(OE) CPU: 0 UID: 0 PID: 37589 Comm: python3 Kdump: loaded Tainted: G OE ------- --- 6.12.0-54.el10.aarch64 #1 Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : refcount_warn_saturate+0xf4/0x148 lr : refcount_warn_saturate+0xf4/0x148 sp : ffff80008b81b7e0 x29: ffff80008b81b7e0 x28: ffff000133d51600 x27: 0000000000000001 x26: 0000000000000000 x25: 00000000ffffffea x24: ffff00010ae80f00 x23: ffff00010ae80f80 x22: ffff0000c66e5d08 x21: 0000000000000000 x20: ffff0000c66e0000 x19: ffff00010ae80340 x18: 0000000000000006 x17: 0000000000000000 x16: 0000000000000020 x15: ffff80008b81b37f x14: 0000000000000000 x13: 2e656572662d7265 x12: ffff80008283ef78 x11: ffff80008257efd0 x10: ffff80008283efd0 x9 : ffff80008021ed90 x8 : 0000000000000001 x7 : 00000000000bffe8 x6 : c0000000ffff7fff x5 : ffff0001fb8e3408 x4 : 0000000000000000 x3 : ffff800179993000 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000133d51600 Call trace: refcount_warn_saturate+0xf4/0x148 mlx5_core_put_rsc+0x88/0xa0 [mlx5_ib] mlx5_core_destroy_rq_tracked+0x64/0x98 [mlx5_ib] mlx5_ib_destroy_wq+0x34/0x80 [mlx5_ib] ib_destroy_wq_user+0x30/0xc0 [ib_core] uverbs_free_wq+0x28/0x58 [ib_uverbs] destroy_hw_idr_uobject+0x34/0x78 [ib_uverbs] uverbs_destroy_uobject+0x48/0x240 [ib_uverbs] __uverbs_cleanup_ufile+0xd4/0x1a8 [ib_uverbs] uverbs_destroy_ufile_hw+0x48/0x120 [ib_uverbs] ib_uverbs_close+0x2c/0x100 [ib_uverbs] __fput+0xd8/0x2f0 __fput_sync+0x50/0x70 __arm64_sys_close+0x40/0x90 invoke_syscall.constprop.0+0x74/0xd0 do_el0_svc+0x48/0xe8 el0_svc+0x44/0x1d0 el0t_64_sync_handler+0x120/0x130 el0t_64_sync+0x1a4/0x1a8

In the Linux kernel, the following vulnerability has been resolved: virtio-net: fix overflow inside virtnet_rq_alloc When the frag just got a page, then may lead to regression on VM. Specially if the sysctl net.core.high_order_alloc_disable value is 1, then the frag always get a page when do refill. Which could see reliable crashes or scp failure (scp a file 100M in size to VM). The issue is that the virtnet_rq_dma takes up 16 bytes at the beginning of a new frag. When the frag size is larger than PAGE_SIZE, everything is fine. However, if the frag is only one page and the total size of the buffer and virtnet_rq_dma is larger than one page, an overflow may occur. The commit f9dac92ba908 ("virtio_ring: enable premapped mode whatever use_dma_api") introduced this problem. And we reverted some commits to fix this in last linux version. Now we try to enable it and fix this bug directly. Here, when the frag size is not enough, we reduce the buffer len to fix this problem.

In the Linux kernel, the following vulnerability has been resolved: media: ar0521: don't overflow when checking PLL values The PLL checks are comparing 64 bit integers with 32 bit ones, as reported by Coverity. Depending on the values of the variables, this may underflow. Fix it ensuring that both sides of the expression are u64.

A use-after-free flaw was found in io_uring/filetable.c in io_install_fixed_file in the io_uring subcomponent in the Linux Kernel during call cleanup. This flaw may lead to a denial of service.

In the Linux kernel, the following vulnerability has been resolved: vt_ioctl: fix array_index_nospec in vt_setactivate array_index_nospec ensures that an out-of-bounds value is set to zero on the transient path. Decreasing the value by one afterwards causes a transient integer underflow. vsa.console should be decreased first and then sanitized with array_index_nospec. Kasper Acknowledgements: Jakob Koschel, Brian Johannesmeyer, Kaveh Razavi, Herbert Bos, Cristiano Giuffrida from the VUSec group at VU Amsterdam.

In the Linux kernel, the following vulnerability has been resolved: RDMA/nldev: Prevent underflow in nldev_stat_set_counter_dynamic_doit() This code checks "index" for an upper bound but it does not check for negatives. Change the type to unsigned to prevent underflows.

In the Linux kernel, the following vulnerability has been resolved: NFSD: prevent underflow in nfssvc_decode_writeargs() Smatch complains: fs/nfsd/nfsxdr.c:341 nfssvc_decode_writeargs() warn: no lower bound on 'args->len' Change the type to unsigned to prevent this issue.

In the Linux kernel, the following vulnerability has been resolved: crypto: qat - add param check for RSA Reject requests with a source buffer that is bigger than the size of the key. This is to prevent a possible integer underflow that might happen when copying the source scatterlist into a linear buffer.

In the Linux kernel, the following vulnerability has been resolved: crypto: qat - add param check for DH Reject requests with a source buffer that is bigger than the size of the key. This is to prevent a possible integer underflow that might happen when copying the source scatterlist into a linear buffer.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: fix nft_counters_enabled underflow at nf_tables_addchain() syzbot is reporting underflow of nft_counters_enabled counter at nf_tables_addchain() [1], for commit 43eb8949cfdffa76 ("netfilter: nf_tables: do not leave chain stats enabled on error") missed that nf_tables_chain_destroy() after nft_basechain_init() in the error path of nf_tables_addchain() decrements the counter because nft_basechain_init() makes nft_is_base_chain() return true by setting NFT_CHAIN_BASE flag. Increment the counter immediately after returning from nft_basechain_init().

In the Linux kernel, the following vulnerability has been resolved: exfat: fix overflow for large capacity partition Using int type for sector index, there will be overflow in a large capacity partition. For example, if storage with sector size of 512 bytes and partition capacity is larger than 2TB, there will be overflow.

In the Linux kernel, the following vulnerability has been resolved: i2c: rtl9300: ensure data length is within supported range Add an explicit check for the xfer length to 'rtl9300_i2c_config_xfer' to ensure the data length isn't within the supported range. In particular a data length of 0 is not supported by the hardware and causes unintended or destructive behaviour. This limitation becomes obvious when looking at the register documentation [1]. 4 bits are reserved for DATA_WIDTH and the value of these 4 bits is used as N + 1, allowing a data length range of 1 <= len <= 16. Affected by this is the SMBus Quick Operation which works with a data length of 0. Passing 0 as the length causes an underflow of the value due to: (len - 1) & 0xf and effectively specifying a transfer length of 16 via the registers. This causes a 16-byte write operation instead of a Quick Write. For example, on SFP modules without write-protected EEPROM this soft-bricks them by overwriting some initial bytes. For completeness, also add a quirk for the zero length. [1] https://svanheule.net/realtek/longan/register/i2c_mst1_ctrl2

In the Linux kernel, the following vulnerability has been resolved: tcp: Correct signedness in skb remaining space calculation Syzkaller reported a bug [1] where sk->sk_forward_alloc can overflow. When we send data, if an skb exists at the tail of the write queue, the kernel will attempt to append the new data to that skb. However, the code that checks for available space in the skb is flawed: ''' copy = size_goal - skb->len ''' The types of the variables involved are: ''' copy: ssize_t (s64 on 64-bit systems) size_goal: int skb->len: unsigned int ''' Due to C's type promotion rules, the signed size_goal is converted to an unsigned int to match skb->len before the subtraction. The result is an unsigned int. When this unsigned int result is then assigned to the s64 copy variable, it is zero-extended, preserving its non-negative value. Consequently, copy is always >= 0. Assume we are sending 2GB of data and size_goal has been adjusted to a value smaller than skb->len. The subtraction will result in copy holding a very large positive integer. In the subsequent logic, this large value is used to update sk->sk_forward_alloc, which can easily cause it to overflow. The syzkaller reproducer uses TCP_REPAIR to reliably create this condition. However, this can also occur in real-world scenarios. The tcp_bound_to_half_wnd() function can also reduce size_goal to a small value. This would cause the subsequent tcp_wmem_schedule() to set sk->sk_forward_alloc to a value close to INT_MAX. Further memory allocation requests would then cause sk_forward_alloc to wrap around and become negative. [1]: https://syzkaller.appspot.com/bug?extid=de6565462ab540f50e47

In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix underflow in second superblock position calculations Macro NILFS_SB2_OFFSET_BYTES, which computes the position of the second superblock, underflows when the argument device size is less than 4096 bytes. Therefore, when using this macro, it is necessary to check in advance that the device size is not less than a lower limit, or at least that underflow does not occur. The current nilfs2 implementation lacks this check, causing out-of-bound block access when mounting devices smaller than 4096 bytes: I/O error, dev loop0, sector 36028797018963960 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 NILFS (loop0): unable to read secondary superblock (blocksize = 1024) In addition, when trying to resize the filesystem to a size below 4096 bytes, this underflow occurs in nilfs_resize_fs(), passing a huge number of segments to nilfs_sufile_resize(), corrupting parameters such as the number of segments in superblocks. This causes excessive loop iterations in nilfs_sufile_resize() during a subsequent resize ioctl, causing semaphore ns_segctor_sem to block for a long time and hang the writer thread: INFO: task segctord:5067 blocked for more than 143 seconds. Not tainted 6.2.0-rc8-syzkaller-00015-gf6feea56f66d #0 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:segctord state:D stack:23456 pid:5067 ppid:2 flags:0x00004000 Call Trace: <TASK> context_switch kernel/sched/core.c:5293 [inline] __schedule+0x1409/0x43f0 kernel/sched/core.c:6606 schedule+0xc3/0x190 kernel/sched/core.c:6682 rwsem_down_write_slowpath+0xfcf/0x14a0 kernel/locking/rwsem.c:1190 nilfs_transaction_lock+0x25c/0x4f0 fs/nilfs2/segment.c:357 nilfs_segctor_thread_construct fs/nilfs2/segment.c:2486 [inline] nilfs_segctor_thread+0x52f/0x1140 fs/nilfs2/segment.c:2570 kthread+0x270/0x300 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308 </TASK> ... Call Trace: <TASK> folio_mark_accessed+0x51c/0xf00 mm/swap.c:515 __nilfs_get_page_block fs/nilfs2/page.c:42 [inline] nilfs_grab_buffer+0x3d3/0x540 fs/nilfs2/page.c:61 nilfs_mdt_submit_block+0xd7/0x8f0 fs/nilfs2/mdt.c:121 nilfs_mdt_read_block+0xeb/0x430 fs/nilfs2/mdt.c:176 nilfs_mdt_get_block+0x12d/0xbb0 fs/nilfs2/mdt.c:251 nilfs_sufile_get_segment_usage_block fs/nilfs2/sufile.c:92 [inline] nilfs_sufile_truncate_range fs/nilfs2/sufile.c:679 [inline] nilfs_sufile_resize+0x7a3/0x12b0 fs/nilfs2/sufile.c:777 nilfs_resize_fs+0x20c/0xed0 fs/nilfs2/super.c:422 nilfs_ioctl_resize fs/nilfs2/ioctl.c:1033 [inline] nilfs_ioctl+0x137c/0x2440 fs/nilfs2/ioctl.c:1301 ... This fixes these issues by inserting appropriate minimum device size checks or anti-underflow checks, depending on where the macro is used.

In the Linux kernel, the following vulnerability has been resolved: drm/sun4i: dsi: Prevent underflow when computing packet sizes Currently, the packet overhead is subtracted using unsigned arithmetic. With a short sync pulse, this could underflow and wrap around to near the maximal u16 value. Fix this by using signed subtraction. The call to max() will correctly handle any negative numbers that are produced. Apply the same fix to the other timings, even though those subtractions are less likely to underflow.

In the Linux kernel, the following vulnerability has been resolved: platform/x86/amd/pmc: Detect when STB is not available Loading the amd_pmc module as: amd_pmc enable_stb=1 ...can result in the following messages in the kernel ring buffer: amd_pmc AMDI0009:00: SMU cmd failed. err: 0xff ioremap on RAM at 0x0000000000000000 - 0x0000000000ffffff WARNING: CPU: 10 PID: 2151 at arch/x86/mm/ioremap.c:217 __ioremap_caller+0x2cd/0x340 Further debugging reveals that this occurs when the requests for S2D_PHYS_ADDR_LOW and S2D_PHYS_ADDR_HIGH return a value of 0, indicating that the STB is inaccessible. To prevent the ioremap warning and provide clarity to the user, handle the invalid address and display an error message.

In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Stop the active perfmon before being destroyed When running `kmscube` with one or more performance monitors enabled via `GALLIUM_HUD`, the following kernel panic can occur: [ 55.008324] Unable to handle kernel paging request at virtual address 00000000052004a4 [ 55.008368] Mem abort info: [ 55.008377] ESR = 0x0000000096000005 [ 55.008387] EC = 0x25: DABT (current EL), IL = 32 bits [ 55.008402] SET = 0, FnV = 0 [ 55.008412] EA = 0, S1PTW = 0 [ 55.008421] FSC = 0x05: level 1 translation fault [ 55.008434] Data abort info: [ 55.008442] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 55.008455] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 55.008467] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 55.008481] user pgtable: 4k pages, 39-bit VAs, pgdp=00000001046c6000 [ 55.008497] [00000000052004a4] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 55.008525] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP [ 55.008542] Modules linked in: rfcomm [...] vc4 v3d snd_soc_hdmi_codec drm_display_helper gpu_sched drm_shmem_helper cec drm_dma_helper drm_kms_helper i2c_brcmstb drm drm_panel_orientation_quirks snd_soc_core snd_compress snd_pcm_dmaengine snd_pcm snd_timer snd backlight [ 55.008799] CPU: 2 PID: 166 Comm: v3d_bin Tainted: G C 6.6.47+rpt-rpi-v8 #1 Debian 1:6.6.47-1+rpt1 [ 55.008824] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT) [ 55.008838] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 55.008855] pc : __mutex_lock.constprop.0+0x90/0x608 [ 55.008879] lr : __mutex_lock.constprop.0+0x58/0x608 [ 55.008895] sp : ffffffc080673cf0 [ 55.008904] x29: ffffffc080673cf0 x28: 0000000000000000 x27: ffffff8106188a28 [ 55.008926] x26: ffffff8101e78040 x25: ffffff8101baa6c0 x24: ffffffd9d989f148 [ 55.008947] x23: ffffffda1c2a4008 x22: 0000000000000002 x21: ffffffc080673d38 [ 55.008968] x20: ffffff8101238000 x19: ffffff8104f83188 x18: 0000000000000000 [ 55.008988] x17: 0000000000000000 x16: ffffffda1bd04d18 x15: 00000055bb08bc90 [ 55.009715] x14: 0000000000000000 x13: 0000000000000000 x12: ffffffda1bd4cbb0 [ 55.010433] x11: 00000000fa83b2da x10: 0000000000001a40 x9 : ffffffda1bd04d04 [ 55.011162] x8 : ffffff8102097b80 x7 : 0000000000000000 x6 : 00000000030a5857 [ 55.011880] x5 : 00ffffffffffffff x4 : 0300000005200470 x3 : 0300000005200470 [ 55.012598] x2 : ffffff8101238000 x1 : 0000000000000021 x0 : 0300000005200470 [ 55.013292] Call trace: [ 55.013959] __mutex_lock.constprop.0+0x90/0x608 [ 55.014646] __mutex_lock_slowpath+0x1c/0x30 [ 55.015317] mutex_lock+0x50/0x68 [ 55.015961] v3d_perfmon_stop+0x40/0xe0 [v3d] [ 55.016627] v3d_bin_job_run+0x10c/0x2d8 [v3d] [ 55.017282] drm_sched_main+0x178/0x3f8 [gpu_sched] [ 55.017921] kthread+0x11c/0x128 [ 55.018554] ret_from_fork+0x10/0x20 [ 55.019168] Code: f9400260 f1001c1f 54001ea9 927df000 (b9403401) [ 55.019776] ---[ end trace 0000000000000000 ]--- [ 55.020411] note: v3d_bin[166] exited with preempt_count 1 This issue arises because, upon closing the file descriptor (which happens when we interrupt `kmscube`), the active performance monitor is not stopped. Although all perfmons are destroyed in `v3d_perfmon_close_file()`, the active performance monitor's pointer (`v3d->active_perfmon`) is still retained. If `kmscube` is run again, the driver will attempt to stop the active performance monitor using the stale pointer in `v3d->active_perfmon`. However, this pointer is no longer valid because the previous process has already terminated, and all performance monitors associated with it have been destroyed and freed. To fix this, when the active performance monitor belongs to a given process, explicitly stop it before destroying and freeing it.

In the Linux kernel, the following vulnerability has been resolved: firmware: qcom: scm: fix a NULL-pointer dereference Some SCM calls can be invoked with __scm being NULL (the driver may not have been and will not be probed as there's no SCM entry in device-tree). Make sure we don't dereference a NULL pointer.

In the Linux kernel, the following vulnerability has been resolved: nfs: Fix KMSAN warning in decode_getfattr_attrs() Fix the following KMSAN warning: CPU: 1 UID: 0 PID: 7651 Comm: cp Tainted: G B Tainted: [B]=BAD_PAGE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009) ===================================================== ===================================================== BUG: KMSAN: uninit-value in decode_getfattr_attrs+0x2d6d/0x2f90 decode_getfattr_attrs+0x2d6d/0x2f90 decode_getfattr_generic+0x806/0xb00 nfs4_xdr_dec_getattr+0x1de/0x240 rpcauth_unwrap_resp_decode+0xab/0x100 rpcauth_unwrap_resp+0x95/0xc0 call_decode+0x4ff/0xb50 __rpc_execute+0x57b/0x19d0 rpc_execute+0x368/0x5e0 rpc_run_task+0xcfe/0xee0 nfs4_proc_getattr+0x5b5/0x990 __nfs_revalidate_inode+0x477/0xd00 nfs_access_get_cached+0x1021/0x1cc0 nfs_do_access+0x9f/0xae0 nfs_permission+0x1e4/0x8c0 inode_permission+0x356/0x6c0 link_path_walk+0x958/0x1330 path_lookupat+0xce/0x6b0 filename_lookup+0x23e/0x770 vfs_statx+0xe7/0x970 vfs_fstatat+0x1f2/0x2c0 __se_sys_newfstatat+0x67/0x880 __x64_sys_newfstatat+0xbd/0x120 x64_sys_call+0x1826/0x3cf0 do_syscall_64+0xd0/0x1b0 entry_SYSCALL_64_after_hwframe+0x77/0x7f The KMSAN warning is triggered in decode_getfattr_attrs(), when calling decode_attr_mdsthreshold(). It appears that fattr->mdsthreshold is not initialized. Fix the issue by initializing fattr->mdsthreshold to NULL in nfs_fattr_init().

In the Linux kernel, the following vulnerability has been resolved: ppp: do not assume bh is held in ppp_channel_bridge_input() Networking receive path is usually handled from BH handler. However, some protocols need to acquire the socket lock, and packets might be stored in the socket backlog is the socket was owned by a user process. In this case, release_sock(), __release_sock(), and sk_backlog_rcv() might call the sk->sk_backlog_rcv() handler in process context. sybot caught ppp was not considering this case in ppp_channel_bridge_input() : WARNING: inconsistent lock state 6.11.0-rc7-syzkaller-g5f5673607153 #0 Not tainted -------------------------------- inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. ksoftirqd/1/24 [HC0[0]:SC1[1]:HE1:SE0] takes: ffff0000db7f11e0 (&pch->downl){+.?.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline] ffff0000db7f11e0 (&pch->downl){+.?.}-{2:2}, at: ppp_channel_bridge_input drivers/net/ppp/ppp_generic.c:2272 [inline] ffff0000db7f11e0 (&pch->downl){+.?.}-{2:2}, at: ppp_input+0x16c/0x854 drivers/net/ppp/ppp_generic.c:2304 {SOFTIRQ-ON-W} state was registered at: lock_acquire+0x240/0x728 kernel/locking/lockdep.c:5759 __raw_spin_lock include/linux/spinlock_api_smp.h:133 [inline] _raw_spin_lock+0x48/0x60 kernel/locking/spinlock.c:154 spin_lock include/linux/spinlock.h:351 [inline] ppp_channel_bridge_input drivers/net/ppp/ppp_generic.c:2272 [inline] ppp_input+0x16c/0x854 drivers/net/ppp/ppp_generic.c:2304 pppoe_rcv_core+0xfc/0x314 drivers/net/ppp/pppoe.c:379 sk_backlog_rcv include/net/sock.h:1111 [inline] __release_sock+0x1a8/0x3d8 net/core/sock.c:3004 release_sock+0x68/0x1b8 net/core/sock.c:3558 pppoe_sendmsg+0xc8/0x5d8 drivers/net/ppp/pppoe.c:903 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] __sys_sendto+0x374/0x4f4 net/socket.c:2204 __do_sys_sendto net/socket.c:2216 [inline] __se_sys_sendto net/socket.c:2212 [inline] __arm64_sys_sendto+0xd8/0xf8 net/socket.c:2212 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49 el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:132 do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151 el0_svc+0x54/0x168 arch/arm64/kernel/entry-common.c:712 el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:730 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:598 irq event stamp: 282914 hardirqs last enabled at (282914): [<ffff80008b42e30c>] __raw_spin_unlock_irqrestore include/linux/spinlock_api_smp.h:151 [inline] hardirqs last enabled at (282914): [<ffff80008b42e30c>] _raw_spin_unlock_irqrestore+0x38/0x98 kernel/locking/spinlock.c:194 hardirqs last disabled at (282913): [<ffff80008b42e13c>] __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:108 [inline] hardirqs last disabled at (282913): [<ffff80008b42e13c>] _raw_spin_lock_irqsave+0x2c/0x7c kernel/locking/spinlock.c:162 softirqs last enabled at (282904): [<ffff8000801f8e88>] softirq_handle_end kernel/softirq.c:400 [inline] softirqs last enabled at (282904): [<ffff8000801f8e88>] handle_softirqs+0xa3c/0xbfc kernel/softirq.c:582 softirqs last disabled at (282909): [<ffff8000801fbdf8>] run_ksoftirqd+0x70/0x158 kernel/softirq.c:928 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&pch->downl); <Interrupt> lock(&pch->downl); *** DEADLOCK *** 1 lock held by ksoftirqd/1/24: #0: ffff80008f74dfa0 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire+0x10/0x4c include/linux/rcupdate.h:325 stack backtrace: CPU: 1 UID: 0 PID: 24 Comm: ksoftirqd/1 Not tainted 6.11.0-rc7-syzkaller-g5f5673607153 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 Call trace: dump_backtrace+0x1b8/0x1e4 arch/arm64/kernel/stacktrace.c:319 show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:326 __dump_sta ---truncated---

In the Linux kernel, the following vulnerability has been resolved: ARM: 9170/1: fix panic when kasan and kprobe are enabled arm32 uses software to simulate the instruction replaced by kprobe. some instructions may be simulated by constructing assembly functions. therefore, before executing instruction simulation, it is necessary to construct assembly function execution environment in C language through binding registers. after kasan is enabled, the register binding relationship will be destroyed, resulting in instruction simulation errors and causing kernel panic. the kprobe emulate instruction function is distributed in three files: actions-common.c actions-arm.c actions-thumb.c, so disable KASAN when compiling these files. for example, use kprobe insert on cap_capable+20 after kasan enabled, the cap_capable assembly code is as follows: <cap_capable>: e92d47f0 push {r4, r5, r6, r7, r8, r9, sl, lr} e1a05000 mov r5, r0 e280006c add r0, r0, #108 ; 0x6c e1a04001 mov r4, r1 e1a06002 mov r6, r2 e59fa090 ldr sl, [pc, #144] ; ebfc7bf8 bl c03aa4b4 <__asan_load4> e595706c ldr r7, [r5, #108] ; 0x6c e2859014 add r9, r5, #20 ...... The emulate_ldr assembly code after enabling kasan is as follows: c06f1384 <emulate_ldr>: e92d47f0 push {r4, r5, r6, r7, r8, r9, sl, lr} e282803c add r8, r2, #60 ; 0x3c e1a05000 mov r5, r0 e7e37855 ubfx r7, r5, #16, #4 e1a00008 mov r0, r8 e1a09001 mov r9, r1 e1a04002 mov r4, r2 ebf35462 bl c03c6530 <__asan_load4> e357000f cmp r7, #15 e7e36655 ubfx r6, r5, #12, #4 e205a00f and sl, r5, #15 0a000001 beq c06f13bc <emulate_ldr+0x38> e0840107 add r0, r4, r7, lsl #2 ebf3545c bl c03c6530 <__asan_load4> e084010a add r0, r4, sl, lsl #2 ebf3545a bl c03c6530 <__asan_load4> e2890010 add r0, r9, #16 ebf35458 bl c03c6530 <__asan_load4> e5990010 ldr r0, [r9, #16] e12fff30 blx r0 e356000f cm r6, #15 1a000014 bne c06f1430 <emulate_ldr+0xac> e1a06000 mov r6, r0 e2840040 add r0, r4, #64 ; 0x40 ...... when running in emulate_ldr to simulate the ldr instruction, panic occurred, and the log is as follows: Unable to handle kernel NULL pointer dereference at virtual address 00000090 pgd = ecb46400 [00000090] *pgd=2e0fa003, *pmd=00000000 Internal error: Oops: 206 [#1] SMP ARM PC is at cap_capable+0x14/0xb0 LR is at emulate_ldr+0x50/0xc0 psr: 600d0293 sp : ecd63af8 ip : 00000004 fp : c0a7c30c r10: 00000000 r9 : c30897f4 r8 : ecd63cd4 r7 : 0000000f r6 : 0000000a r5 : e59fa090 r4 : ecd63c98 r3 : c06ae294 r2 : 00000000 r1 : b7611300 r0 : bf4ec008 Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user Control: 32c5387d Table: 2d546400 DAC: 55555555 Process bash (pid: 1643, stack limit = 0xecd60190) (cap_capable) from (kprobe_handler+0x218/0x340) (kprobe_handler) from (kprobe_trap_handler+0x24/0x48) (kprobe_trap_handler) from (do_undefinstr+0x13c/0x364) (do_undefinstr) from (__und_svc_finish+0x0/0x30) (__und_svc_finish) from (cap_capable+0x18/0xb0) (cap_capable) from (cap_vm_enough_memory+0x38/0x48) (cap_vm_enough_memory) from (security_vm_enough_memory_mm+0x48/0x6c) (security_vm_enough_memory_mm) from (copy_process.constprop.5+0x16b4/0x25c8) (copy_process.constprop.5) from (_do_fork+0xe8/0x55c) (_do_fork) from (SyS_clone+0x1c/0x24) (SyS_clone) from (__sys_trace_return+0x0/0x10) Code: 0050a0e1 6c0080e2 0140a0e1 0260a0e1 (f801f0e7)

In the Linux kernel, the following vulnerability has been resolved: btrfs: wait for fixup workers before stopping cleaner kthread during umount During unmount, at close_ctree(), we have the following steps in this order: 1) Park the cleaner kthread - this doesn't destroy the kthread, it basically halts its execution (wake ups against it work but do nothing); 2) We stop the cleaner kthread - this results in freeing the respective struct task_struct; 3) We call btrfs_stop_all_workers() which waits for any jobs running in all the work queues and then free the work queues. Syzbot reported a case where a fixup worker resulted in a crash when doing a delayed iput on its inode while attempting to wake up the cleaner at btrfs_add_delayed_iput(), because the task_struct of the cleaner kthread was already freed. This can happen during unmount because we don't wait for any fixup workers still running before we call kthread_stop() against the cleaner kthread, which stops and free all its resources. Fix this by waiting for any fixup workers at close_ctree() before we call kthread_stop() against the cleaner and run pending delayed iputs. The stack traces reported by syzbot were the following: BUG: KASAN: slab-use-after-free in __lock_acquire+0x77/0x2050 kernel/locking/lockdep.c:5065 Read of size 8 at addr ffff8880272a8a18 by task kworker/u8:3/52 CPU: 1 UID: 0 PID: 52 Comm: kworker/u8:3 Not tainted 6.12.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Workqueue: btrfs-fixup btrfs_work_helper Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 __lock_acquire+0x77/0x2050 kernel/locking/lockdep.c:5065 lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5825 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0xd5/0x120 kernel/locking/spinlock.c:162 class_raw_spinlock_irqsave_constructor include/linux/spinlock.h:551 [inline] try_to_wake_up+0xb0/0x1480 kernel/sched/core.c:4154 btrfs_writepage_fixup_worker+0xc16/0xdf0 fs/btrfs/inode.c:2842 btrfs_work_helper+0x390/0xc50 fs/btrfs/async-thread.c:314 process_one_work kernel/workqueue.c:3229 [inline] process_scheduled_works+0xa63/0x1850 kernel/workqueue.c:3310 worker_thread+0x870/0xd30 kernel/workqueue.c:3391 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> Allocated by task 2: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 unpoison_slab_object mm/kasan/common.c:319 [inline] __kasan_slab_alloc+0x66/0x80 mm/kasan/common.c:345 kasan_slab_alloc include/linux/kasan.h:247 [inline] slab_post_alloc_hook mm/slub.c:4086 [inline] slab_alloc_node mm/slub.c:4135 [inline] kmem_cache_alloc_node_noprof+0x16b/0x320 mm/slub.c:4187 alloc_task_struct_node kernel/fork.c:180 [inline] dup_task_struct+0x57/0x8c0 kernel/fork.c:1107 copy_process+0x5d1/0x3d50 kernel/fork.c:2206 kernel_clone+0x223/0x880 kernel/fork.c:2787 kernel_thread+0x1bc/0x240 kernel/fork.c:2849 create_kthread kernel/kthread.c:412 [inline] kthreadd+0x60d/0x810 kernel/kthread.c:765 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 Freed by task 61: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:579 poison_slab_object mm/kasan/common.c:247 [inline] __kasan_slab_free+0x59/0x70 mm/kasan/common.c:264 kasan_slab_free include/linux/kasan.h:230 [inline] slab_free_h ---truncated---

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: Fix multiple init when debugfs is disabled If bt_debugfs is not created successfully, which happens if either CONFIG_DEBUG_FS or CONFIG_DEBUG_FS_ALLOW_ALL is unset, then iso_init() returns early and does not set iso_inited to true. This means that a subsequent call to iso_init() will result in duplicate calls to proto_register(), bt_sock_register(), etc. With CONFIG_LIST_HARDENED and CONFIG_BUG_ON_DATA_CORRUPTION enabled, the duplicate call to proto_register() triggers this BUG(): list_add double add: new=ffffffffc0b280d0, prev=ffffffffbab56250, next=ffffffffc0b280d0. ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:35! Oops: invalid opcode: 0000 [#1] PREEMPT SMP PTI CPU: 2 PID: 887 Comm: bluetoothd Not tainted 6.10.11-1-ao-desktop #1 RIP: 0010:__list_add_valid_or_report+0x9a/0xa0 ... __list_add_valid_or_report+0x9a/0xa0 proto_register+0x2b5/0x340 iso_init+0x23/0x150 [bluetooth] set_iso_socket_func+0x68/0x1b0 [bluetooth] kmem_cache_free+0x308/0x330 hci_sock_sendmsg+0x990/0x9e0 [bluetooth] __sock_sendmsg+0x7b/0x80 sock_write_iter+0x9a/0x110 do_iter_readv_writev+0x11d/0x220 vfs_writev+0x180/0x3e0 do_writev+0xca/0x100 ... This change removes the early return. The check for iso_debugfs being NULL was unnecessary, it is always NULL when iso_inited is false.

In the Linux kernel, the following vulnerability has been resolved: media: dvbdev: prevent the risk of out of memory access The dvbdev contains a static variable used to store dvb minors. The behavior of it depends if CONFIG_DVB_DYNAMIC_MINORS is set or not. When not set, dvb_register_device() won't check for boundaries, as it will rely that a previous call to dvb_register_adapter() would already be enforcing it. On a similar way, dvb_device_open() uses the assumption that the register functions already did the needed checks. This can be fragile if some device ends using different calls. This also generate warnings on static check analysers like Coverity. So, add explicit guards to prevent potential risk of OOM issues.

In the Linux kernel, the following vulnerability has been resolved: scsi: target: core: Fix null-ptr-deref in target_alloc_device() There is a null-ptr-deref issue reported by KASAN: BUG: KASAN: null-ptr-deref in target_alloc_device+0xbc4/0xbe0 [target_core_mod] ... kasan_report+0xb9/0xf0 target_alloc_device+0xbc4/0xbe0 [target_core_mod] core_dev_setup_virtual_lun0+0xef/0x1f0 [target_core_mod] target_core_init_configfs+0x205/0x420 [target_core_mod] do_one_initcall+0xdd/0x4e0 ... entry_SYSCALL_64_after_hwframe+0x76/0x7e In target_alloc_device(), if allocing memory for dev queues fails, then dev will be freed by dev->transport->free_device(), but dev->transport is not initialized at that time, which will lead to a null pointer reference problem. Fixing this bug by freeing dev with hba->backend->ops->free_device().

In the Linux kernel, the following vulnerability has been resolved: KEYS: trusted: Fix memory leak on object td Two error return paths are neglecting to free allocated object td, causing a memory leak. Fix this by returning via the error return path that securely kfree's td. Fixes clang scan-build warning: security/keys/trusted-keys/trusted_tpm1.c:496:10: warning: Potential memory leak [unix.Malloc]

IBM Spectrum Protect Client 7.1 and 8.1 is vulnerable to a stack based buffer overflow, caused by improper bounds checking. A local attacker could exploit this vulnerability and cause a denial of service. IBM X-Force ID: 214438.

In the Linux kernel, the following vulnerability has been resolved: idpf: fix idpf_vc_core_init error path In an event where the platform running the device control plane is rebooted, reset is detected on the driver. It releases all the resources and waits for the reset to complete. Once the reset is done, it tries to build the resources back. At this time if the device control plane is not yet started, then the driver timeouts on the virtchnl message and retries to establish the mailbox again. In the retry flow, mailbox is deinitialized but the mailbox workqueue is still alive and polling for the mailbox message. This results in accessing the released control queue leading to null-ptr-deref. Fix it by unrolling the work queue cancellation and mailbox deinitialization in the reverse order which they got initialized.

In the Linux kernel, the following vulnerability has been resolved: drm/msm/devfreq: Fix OPP refcnt leak

In the Linux kernel, the following vulnerability has been resolved: btrfs: free exchange changeset on failures Fstests runs on my VMs have show several kmemleak reports like the following. unreferenced object 0xffff88811ae59080 (size 64): comm "xfs_io", pid 12124, jiffies 4294987392 (age 6.368s) hex dump (first 32 bytes): 00 c0 1c 00 00 00 00 00 ff cf 1c 00 00 00 00 00 ................ 90 97 e5 1a 81 88 ff ff 90 97 e5 1a 81 88 ff ff ................ backtrace: [<00000000ac0176d2>] ulist_add_merge+0x60/0x150 [btrfs] [<0000000076e9f312>] set_state_bits+0x86/0xc0 [btrfs] [<0000000014fe73d6>] set_extent_bit+0x270/0x690 [btrfs] [<000000004f675208>] set_record_extent_bits+0x19/0x20 [btrfs] [<00000000b96137b1>] qgroup_reserve_data+0x274/0x310 [btrfs] [<0000000057e9dcbb>] btrfs_check_data_free_space+0x5c/0xa0 [btrfs] [<0000000019c4511d>] btrfs_delalloc_reserve_space+0x1b/0xa0 [btrfs] [<000000006d37e007>] btrfs_dio_iomap_begin+0x415/0x970 [btrfs] [<00000000fb8a74b8>] iomap_iter+0x161/0x1e0 [<0000000071dff6ff>] __iomap_dio_rw+0x1df/0x700 [<000000002567ba53>] iomap_dio_rw+0x5/0x20 [<0000000072e555f8>] btrfs_file_write_iter+0x290/0x530 [btrfs] [<000000005eb3d845>] new_sync_write+0x106/0x180 [<000000003fb505bf>] vfs_write+0x24d/0x2f0 [<000000009bb57d37>] __x64_sys_pwrite64+0x69/0xa0 [<000000003eba3fdf>] do_syscall_64+0x43/0x90 In case brtfs_qgroup_reserve_data() or btrfs_delalloc_reserve_metadata() fail the allocated extent_changeset will not be freed. So in btrfs_check_data_free_space() and btrfs_delalloc_reserve_space() free the allocated extent_changeset to get rid of the allocated memory. The issue currently only happens in the direct IO write path, but only after 65b3c08606e5 ("btrfs: fix ENOSPC failure when attempting direct IO write into NOCOW range"), and also at defrag_one_locked_target(). Every other place is always calling extent_changeset_free() even if its call to btrfs_delalloc_reserve_space() or btrfs_check_data_free_space() has failed.

A vulnerability was found in the Linux kernel's block_invalidatepage in fs/buffer.c in the filesystem. A missing sanity check may allow a local attacker with user privilege to cause a denial of service (DOS) problem.

In the Linux kernel, the following vulnerability has been resolved: mm/memory-failure: make sure wait for page writeback in memory_failure Our syzkaller trigger the "BUG_ON(!list_empty(&inode->i_wb_list))" in clear_inode: kernel BUG at fs/inode.c:519! Internal error: Oops - BUG: 0 [#1] SMP Modules linked in: Process syz-executor.0 (pid: 249, stack limit = 0x00000000a12409d7) CPU: 1 PID: 249 Comm: syz-executor.0 Not tainted 4.19.95 Hardware name: linux,dummy-virt (DT) pstate: 80000005 (Nzcv daif -PAN -UAO) pc : clear_inode+0x280/0x2a8 lr : clear_inode+0x280/0x2a8 Call trace: clear_inode+0x280/0x2a8 ext4_clear_inode+0x38/0xe8 ext4_free_inode+0x130/0xc68 ext4_evict_inode+0xb20/0xcb8 evict+0x1a8/0x3c0 iput+0x344/0x460 do_unlinkat+0x260/0x410 __arm64_sys_unlinkat+0x6c/0xc0 el0_svc_common+0xdc/0x3b0 el0_svc_handler+0xf8/0x160 el0_svc+0x10/0x218 Kernel panic - not syncing: Fatal exception A crash dump of this problem show that someone called __munlock_pagevec to clear page LRU without lock_page: do_mmap -> mmap_region -> do_munmap -> munlock_vma_pages_range -> __munlock_pagevec. As a result memory_failure will call identify_page_state without wait_on_page_writeback. And after truncate_error_page clear the mapping of this page. end_page_writeback won't call sb_clear_inode_writeback to clear inode->i_wb_list. That will trigger BUG_ON in clear_inode! Fix it by checking PageWriteback too to help determine should we skip wait_on_page_writeback.

A memory leak flaw was found in the Linux kernel in the ccp_run_aes_gcm_cmd() function in drivers/crypto/ccp/ccp-ops.c, which allows attackers to cause a denial of service (memory consumption). This vulnerability is similar with the older CVE-2019-18808.