A security vulnerability has been detected in Tenda AC6 15.03.06.23. Affected by this issue is the function get_log_file of the file /goform/getLogFile of the component httpd. The manipulation of the argument wans.flag leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed publicly and may be used.

Proself Enterprise/Standard Edition Ver5.61 and earlier, Proself Gateway Edition Ver1.62 and earlier, and Proself Mail Sanitize Edition Ver1.07 and earlier allow a remote authenticated attacker with an administrative privilege to execute arbitrary OS commands.

An issue was discovered in Poly EagleEye Director II before 2.2.2.1. os.system command injection can be achieved by an admin.

A command injection vulnerability has been reported to affect QuRouter 2.5.1. If a remote attacker gains an administrator account, they can then exploit the vulnerability to execute arbitrary commands. We have already fixed the vulnerability in the following version: QuRouter 2.5.1.060 and later

A vulnerability was found in D-Link DCS-931L up to 1.13.0. This affects an unknown part of the file /goform/setSysAdmin. The manipulation of the argument AdminID results in os command injection. The attack can be executed remotely. The exploit has been made public and could be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability has been identified in SCALANCE LPE9403 (6GK5998-3GS00-2AC2) (All versions < V4.0). Affected devices do not properly sanitize user input when creating new VXLAN configurations. This could allow an authenticated highly-privileged remote attacker to execute arbitrary code on the device.

Cacti is an open source operational monitoring and fault management framework. In Cacti 1.2.24, under certain conditions, an authenticated privileged user, can use a malicious string in the SNMP options of a Device, performing command injection and obtaining remote code execution on the underlying server. The `lib/snmp.php` file has a set of functions, with similar behavior, that accept in input some variables and place them into an `exec` call without a proper escape or validation. This issue has been addressed in version 1.2.25. Users are advised to upgrade. There are no known workarounds for this vulnerability.

An OS command injection vulnerability exists in the console factory functionality of InHand Networks InRouter302 V3.5.4. A specially-crafted network request can lead to command execution. An attacker can send a sequence of requests to trigger this vulnerability.

An OS command injection vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow authenticated administrators to execute commands via a network. We have already fixed the vulnerability in the following versions: QTS 5.1.3.2578 build 20231110 and later QuTS hero h5.1.3.2578 build 20231110 and later QuTScloud c5.1.5.2651 and later

An issue in Dolibarr ERP CRM v.17.0.1 and before allows a remote privileged attacker to execute arbitrary code via a crafted command/script.

An OS command injection vulnerability exists in the web interface mac2name functionality of Peplink Smart Reader v1.2.0 (in QEMU). A specially crafted HTTP request can lead to arbitrary command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.

Dell PowerProtect Data Domain, versions 8.5 through 8.6 contain a command injection vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to arbitrary command execution with root privileges.

An OS command injection vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow authenticated administrators to execute commands via a network. We have already fixed the vulnerability in the following versions: QTS 5.1.3.2578 build 20231110 and later QuTS hero h5.1.3.2578 build 20231110 and later

A vulnerability has been identified in SCALANCE LPE9403 (6GK5998-3GS00-2AC2) (All versions < V4.0). Affected devices do not properly sanitize user input when creating new users. This could allow an authenticated highly-privileged remote attacker to execute arbitrary code on the device.

Authenticated command injection vulnerabilities exist in the AOS-CX Network Analytics Engine via NAE scripts. Successful exploitation of these vulnerabilities result in the ability to execute arbitrary commands as a privileged user on the underlying operating system, leading to a complete compromise of the switch running AOS-CX in ArubaOS-CX Switches version(s): AOS-CX 10.10.xxxx: 10.10.0002 and below, AOS-CX 10.09.xxxx: 10.09.1030 and below, AOS-CX 10.08.xxxx: 10.08.1070 and below, AOS-CX 10.06.xxxx: 10.06.0210 and below. Aruba has released upgrades for ArubaOS-CX Switch Devices that address these security vulnerabilities.

A vulnerability, which was classified as critical, has been found in D-Link DIR-823X 240126/240802. This issue affects the function sub_41710C of the file /goform/diag_nslookup of the component HTTP POST Request Handler. The manipulation of the argument target_addr leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

A authenticated remote command injection vulnerability was discovered in Aruba ClearPass Policy Manager version(s): 6.10.4 and below, 6.9.9 and below, 6.8.9-HF2 and below, 6.7.x and below. Aruba has released updates to ClearPass Policy Manager that address this security vulnerability.

In PHOENIX CONTACTs WP 6xxx series web panels in versions prior to 4.0.10 a remote attacker with SNMPv2 write privileges may use an a special SNMP request to gain full access to the device.

1Panel is an open source Linux server operation and maintenance management panel. An OS command injection vulnerability exists in 1Panel firewall functionality. A specially-crafted HTTP request can lead to arbitrary command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability. 1Panel firewall functionality `/hosts/firewall/ip` endpoint read user input without validation, the attacker extends the default functionality of the application, which execute system commands. An attacker can execute arbitrary code on the target system, which can lead to a complete compromise of the system. This issue has been addressed in commit `e17b80cff49` which is included in release version `1.4.3`. Users are advised to upgrade. There are no known workarounds for this vulnerability.

Adobe Commerce versions 2.4.6-p1 (and earlier), 2.4.5-p3 (and earlier) and 2.4.4-p4 (and earlier) are affected by an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability that could lead to arbitrary code execution by an admin-privilege authenticated attacker. Exploitation of this issue does not require user interaction.

A authenticated remote command injection vulnerability was discovered in Aruba ClearPass Policy Manager version(s): 6.10.4 and below, 6.9.9 and below, 6.8.9-HF2 and below, 6.7.x and below. Aruba has released updates to ClearPass Policy Manager that address this security vulnerability.

Improper Neutralization of commands allowed to be executed via OTRS System Configuration e.g. SchedulerCronTaskModule using UnitTests modules allows any authenticated attacker with admin privileges local execution of Code.This issue affects OTRS: from 7.0.X before 7.0.45, from 8.0.X before 8.0.35; ((OTRS)) Community Edition: from 6.0.1 through 6.0.34.

A authenticated remote command injection vulnerability was discovered in Aruba ClearPass Policy Manager version(s): 6.10.4 and below, 6.9.9 and below, 6.8.9-HF2 and below, 6.7.x and below. Aruba has released updates to ClearPass Policy Manager that address this security vulnerability.

A command injection vulnerability may be exploited after the admin's authentication in the cloud communication interface on the TP-Link Archer BE230 v1.2. Successful exploitation could allow an attacker to gain full administrative control of the device, resulting in severe compromise of configuration integrity, network security, and service availability. This CVE covers one of multiple distinct OS command injection issues identified across separate code paths. Although similar in nature, each instance is tracked under a unique CVE ID. This issue affects Archer BE230 v1.2 < 1.2.4 Build 20251218 rel.70420.

A vulnerability has been found in D-Link DIR-823X 250416. This affects the function sub_4211C8 of the file /goform/set_filtering. Such manipulation leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

A post-authentication command injection vulnerability exists in the PPTP client functionality of Tp-Link ER7206 Omada Gigabit VPN Router 1.3.0 build 20230322 Rel.70591. A specially crafted HTTP request can lead to arbitrary command injection. An attacker can make an authenticated HTTP request to trigger this vulnerability and gain access to an unrestricted shell.

A vulnerability was identified in D-Link DIR-823X 250416. This affects an unknown function of the file /goform/set_server_settings of the component Configuration Parameter Handler. The manipulation of the argument terminal_addr/server_ip/server_port leads to os command injection. The attack may be initiated remotely. The exploit is publicly available and might be used.

SUNNET WMPro portal's file management function has a vulnerability of insufficient filtering for user input. A remote attacker with administrator privilege or a privileged account can exploit this vulnerability to inject and execute arbitrary system commands to perform arbitrary system operations or disrupt service.

An OS command injection vulnerability exists in the api.cgi cmd.mvpn.x509.write functionality of peplink Surf SOHO HW1 v6.3.5 (in QEMU). A specially crafted HTTP request can lead to command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.This vulnerability is specifically for the `system` call in the file `/web/MANGA/cgi-bin/api.cgi` for firmware version 6.3.5 at offset 0x4bddb8.

TN-5900 Series firmware versions v3.3 and prior are vulnerable to the command-injection vulnerability. This vulnerability stems from insufficient input validation and improper authentication in the certification-generation function, which could potentially allow malicious users to execute remote code on affected devices.

Cacti is an open source performance and fault management framework. Due to a flaw in multi-line SNMP result parser, authenticated users can inject malformed OIDs in the response. When processed by ss_net_snmp_disk_io() or ss_net_snmp_disk_bytes(), a part of each OID will be used as a key in an array that is used as part of a system command, causing a command execution vulnerability. This vulnerability is fixed in 1.2.29.

The Total Upkeep – WordPress Backup Plugin plus Restore & Migrate by BoldGrid plugin for WordPress is vulnerable to Remote Code Execution in all versions up to, and including, 1.16.10 via the compression_level setting. This is due to the plugin using the compression_level setting in proc_open() without any validation. This makes it possible for authenticated attackers, with administrator-level access and above, to execute code on the server.

IBM Security Verify Governance, Identity Manager 10.0 could allow a remote authenticated attacker to execute arbitrary commands on the system by sending a specially crafted request. IBM X-Force ID: 257873.

A valid, authenticated LXCA user with elevated privileges may be able to execute command injections through crafted calls to a specific web API.

AMI BMC contains a vulnerability in the SPX REST API, where an attacker with the required privileges can inject arbitrary shell commands, which may lead to code execution, denial of service, information disclosure, or data tampering.  

Manage::Certificates in Zen Load Balancer 3.10.1 allows remote authenticated admins to execute arbitrary OS commands via shell metacharacters in the index.cgi cert_issuer, cert_division, cert_organization, cert_locality, cert_state, cert_country, or cert_email parameter.

A vulnerability was found in Ruijie RG-BCR860 2.5.13 and classified as critical. This issue affects some unknown processing of the component Network Diagnostic Page. The manipulation leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-232547. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

TN-4900 Series firmware versions v1.2.4 and prior and TN-5900 Series firmware versions v3.3 and prior are vulnerable to the command-injection vulnerability. This vulnerability stems from insufficient input validation in the certificate-generation function, which could potentially allow malicious users to execute remote code on affected devices.

An OS command injection vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow authenticated administrators to execute commands via a network. We have already fixed the vulnerability in the following versions: QTS 4.5.4.2790 build 20240605 and later QuTS hero h4.5.4.2790 build 20240606 and later

An OS command injection vulnerability exists in the api.cgi cmd.mvpn.x509.write functionality of peplink Surf SOHO HW1 v6.3.5 (in QEMU). A specially crafted HTTP request can lead to command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.This vulnerability is specifically for the `system` call in the file `/web/MANGA/cgi-bin/api.cgi` for firmware version 6.3.5 at offset `0x4bde44`.

IBM Security Verify Governance 10.0 could allow a remote authenticated attacker to execute arbitrary commands on the system by sending a specially crafted request. IBM X-Force ID: 256036.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code on an affected device or cause the device to restart unexpectedly, resulting in a denial of service (DoS) condition. These vulnerabilities are due to insufficient validation of user fields within incoming HTTP packets. An attacker could exploit these vulnerabilities by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on an affected device with root-level privileges or to cause the device to restart unexpectedly, resulting in a DoS condition. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.

Emissary is a P2P based data-driven workflow engine. Prior to 8.39.0, the Executrix utility class constructed shell commands by concatenating configuration-derived values — including the PLACE_NAME parameter — with insufficient sanitization. Only spaces were replaced with underscores, allowing shell metacharacters (;, |, $, `, (, ), etc.) to pass through into /bin/sh -c command execution. This vulnerability is fixed in 8.39.0.

A vulnerability in the web UI feature of Cisco IOS XE Software could allow an authenticated, remote attacker to perform an injection attack against an affected device. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted input to the web UI API. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with root privileges. To exploit this vulnerability, an attacker must have valid Administrator privileges on the affected device.

A security vulnerability has been detected in D-Link DIR-823X 250416. This affects the function sub_4175CC of the file /goform/set_static_route_table. Such manipulation of the argument interface/destip/netmask/gateway/metric leads to os command injection. The attack may be performed from remote. The exploit has been disclosed publicly and may be used.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code on an affected device or cause the device to restart unexpectedly, resulting in a denial of service (DoS) condition. These vulnerabilities are due to insufficient validation of user fields within incoming HTTP packets. An attacker could exploit these vulnerabilities by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on an affected device with root-level privileges or to cause the device to restart unexpectedly, resulting in a DoS condition. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.

A flaw has been found in TRENDnet TEW-811DRU 1.0.2.0. This affects the function setDeviceURL  of the file uapply.cgi of the component httpd . This manipulation of the argument DeviceURL causes os command injection. The attack can be initiated remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code on an affected device or cause the device to restart unexpectedly, resulting in a denial of service (DoS) condition. These vulnerabilities are due to insufficient validation of user fields within incoming HTTP packets. An attacker could exploit these vulnerabilities by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on an affected device with root-level privileges or to cause the device to restart unexpectedly, resulting in a DoS condition. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code on an affected device or cause the device to restart unexpectedly, resulting in a denial of service (DoS) condition. These vulnerabilities are due to insufficient validation of user fields within incoming HTTP packets. An attacker could exploit these vulnerabilities by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on an affected device with root-level privileges or to cause the device to restart unexpectedly, resulting in a DoS condition. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.

TN-4900 Series firmware versions v1.2.4 and prior and TN-5900 Series firmware versions v3.3 and prior are vulnerable to the command injection vulnerability. This vulnerability stems from inadequate input validation in the certificate management function, which could potentially allow malicious users to execute remote code on affected devices.